Hydrodynamic performance of a dual cylindrical caisson breakwater

The hydrodynamic performance of a dual cylindrical caisson breakwater (DCBW) formed by a row of caissons each of which consisting of a porous outer cylinder circumscribing an impermeable inner cylinder has been theoretically investigated. The theoretical formulation is based on the eigenfunction expansion method proposed by Spring and Monkmeyer (1974) which was further modified by Linton and Evans [Linton, C.M., Evans, D.V., 1990. The interaction of waves with arrays of vertical circular cylinders. Journal of Fluid Mechanics 215, 549–569] for an array of impermeable cylinders. The present formulation is an extension of the work of Wang and Ren [Wang, K.H., Ren, X., 1994. Wave interaction with a concentric porous cylinder system. Ocean Engineering 21(4), 343–360], wherein; the interaction of linear waves with a single concentric porous cylinder system was studied. In the present study, the formulation has been extended to the case of a group of porous dual cylinder system. Parametric studies are carried out to study the influence of porosity (G₀) on the outer caisson, width of the doughnut chamber (a/b) and the angle of wave incidence on the variation in the hydrodynamic loading, wave run-up, free-surface elevation in its vicinity as well as the transmission on its lee-side. The importance of the presence of the inner cylinder in achieving the required hydrodynamic performance in terms of either protection or providing tranquility on its lee side keeping higher stability for the breakwater system is highlighted.     

Water wave interaction with an array of bottom-mounted surface-piercing porous cylinders

The interaction of water waves with arrays of bottom-mounted, surface-piercing circular cylinders is investigated theoretically. The sidewall of each cylinder is porous and thin. Under the assumptions of potential flow and linear wave theory, a semi-analytical solution is obtained by an eigenfunction expansion approach first proposed for impermeable cylinders by Spring and Monkmeyer (1974), and later simplified by Linton and Evans (1990). Analytical expressions are developed for the wave motion in the exterior and all interior fluid regions. Numerical results are presented which illustrate the effects of various wave and structural parameters on the hydrodynamic loads and the diffracted wave field. It is found that the porosity of the structures may result in a significant reduction in both the hydrodynamic loads experienced by the cylinders and the associated wave runup.     

Interaction of cnoidal waves with an array of vertical concentric porous cylinders

An array of large concentric porous cylinder arrays is mounted in shallow water exposed to cnoidal waves. The interactions between waves and cylinders are studied theoretically using an eigenfunction expansion approach. Semi-analytical solutions of hydrodynamic loads and wave run-up on each cylinder are obtained using first approximation to cnoidal waves. The square array configuration of four-legged identical concentric porous cylinder is investigated in present study. Numerical results reveal the variation of dimensionless wave force and wave run-up on individual cylinder with angle of incidence, porosity parameter, spacing between outer and inner cylinders, spacing between concentric porous cylinders and wave parameter. Different mechanism of wave force is found under different range of scattering parameter.     

Analysis of Interaction of Plane Waves with Multiple Circular Cylinders

The interaction of water waves with multiple circular cylinders is analysed briefly in this paper.The formula obtained by Linton and Evans is improved to introduce a relation of phase between cylinders.The condition for the existence of the solution has been proved.The numerical results are compared with ana-lytic solutions(Linton and Evans),numerical solutions and experimental data(Isaacson),and good agree-ment has been found.     

An iterative procedure for the diffraction of water waves by multiple cylinders

Diffraction of water waves by an array of vertical cylinders of circular cross section is studied. In order to account for first order interaction among the cylinders, the body boundary condition is satisfied for each cylinder considering the scattered wave field from other cylinders in an iterative way. After each iteration, coefficients in the partial wave decomposition of the wave potential are modified. Convergence is fast for the whole range of frequencies and for a large number of bodies, compared with exact algebraic methods of Linton and Evans [J. Fluid Mech. 46 (1990) 549] and Kagemoto and Yue [J. Fluid Mech. 166 (1) (1986) 189].     

Solitary wave interaction with a concentric porous cylinder system

Theoretical investigations on solitary waves interacting with a surface-piercing concentric porous cylinder system are presented in this paper. The outer cylinder is porous and considered thin in thickness, while the inner cylinder is solid. Both cylinders are rigidly fixed on the bottom. Following Isaacson's [Isaacson, Micheal de St. Q., 1983. Solitary wave diffraction around large cylinder. Journal of the Waterway, Port, Coastal and Ocean Engineering 109(1), 121–127.] approach, we obtained the solutions for free-surface elevation and the corresponding velocity potential in terms of Fourier integrals. Numerical results are presented to show the effects of incident wave condition, porosity of the outer cylinder and radius ratio on wave forces and wave elevations around the inner and outer cylinders.     

Interaction between waves and an array of floating porous circular cylinders

The present study theoretically as well as experimentally investigates the interaction between waves and an array of porous circular cylinders with or without an inner porous plate based on the linear wave theory.To design more effective floating breakwaters,the transmission rate of waves propagating through the array is evaluated.Each cylinder in the array is partly made of porous materials.Specifically,it possesses a porous sidewall and an impermeable bottom.In addition,an inner porous plate is horizontally fixed inside the cylinders.It dissipates the wave more effectively and eliminates the sloshing phenomenon.The approach suggested by Kagemoto and Yue(1986) is adopted to solve the multiple-scatter problem,while a hierarchical interaction theory is adopted to deal with hydrodynamic interactions among a great number of bodies,which efficiently saves computation time.Meanwhile,a series of model tests with an array of porous cylinders is performed in a wave basin to validate the theoretical work and the calculated results.The draft of the cylinders,the location of the inner porous plate,and the spacing between adjacent cylinders are also adjusted to investigate their effects on wave dissipation.     

Wave interaction with a concentric porous cylinder system

This is a theoretical investigation of wave interaction with a concentric surface-piercing two-cylinder system. The exterior cylinder is porous and considered to be thin in thickness and the interior cylinder is impermeable. Both cylinders are rigidly fixed at the sea bed. The fluid motion is idealized as a linearized potential flow. The free-surface elevation and the total net hydrodynamic forces acting on both cylinders are determined analytically. The wave-induced overturning moments are also evaluated. It is found that, with the existence of the exterior porous cylinder, the hydrodynamic force acting on the interior cylinder is reduced if compared to the force exerted on the interior cylinder by a direct wave impact. The reduction of the wave amplitude around the leeward side of the outer porous cylinder is shown from the free-surface computations. In this paper, results are also presented to illustrate the effects of wave parameter and structural porosity on this wave and cylinder interaction problem. The role played by the ratio of radii of the inner and outer cylinders is duscussed.     

An analytical approach for the calculation of random wave forces on submerged tunnels

This paper deals with the random forces produced by high ocean waves on submerged horizontal circular cylinders. Arena [Arena F, Interaction between long-crested random waves and a submerged horizontal cylinder. Phys Fluids 2006;18(7):1–9 (paper 076602)] obtained the analytical solution of the random wave field for two dimensional waves by extending the classical Ogilvie solution [Ogilvie TF, First- and second-order forces on a cylinder submerged under a free surface. J Fluid Mech 1963;16:451–472; Arena F, Note on a paper by Ogilvie: The interaction between waves and a submerged horizontal cylinder. J Fluid Mech 1999;394:355–356] to the case of random waves. In this paper, the wave force acting on the cylinder is investigated and the Froude Krylov force [Sarpkaya T, Isaacson M, Mechanics of wave forces on offshore structures, Van Nostrand Reinhold Co.; 1981], on the ideal water cylinder, is calculated from the random incident wave field. Both forces represent a Gaussian random process of time. The diffraction coefficient of the wave force is obtained as quotient between the standard deviations of the force on the solid cylinder and of the Froude Krylov force. It is found that the diffraction coefficient of the horizontal force C_do is equal to the C_dv of the vertical force. Finally, it is shown that, since a very large wave force occurs on the cylinder, it may be calculated, in time domain, starting from the Froude Krylov force. It is then shown that this result is due to the fact that the frequency spectrum of the force acting on the cylinder is nearly identical to that of the Froude–Krylov force.     

Short-crested wave interaction with a concentric porous cylindrical structure

In this paper, theoretical study is carried out to investigate the general 3D short-crested wave interaction with a concentric two-cylinder system. The interior cylinder is impermeable and the exterior cylinder is thin in thickness and porous to protect the interior cylinder. Both cylinders are surface-piercing and bottom mounted. Analytical solution is derived based on the linear potential theory. The effects of the wide range wave parameters and structure configuration including porosity of the exterior cylinder and the annular spacing on the wave forces, surface elevations and the diffracted wave contours are examined.     

多向不规则波浪作用下群墩结构上爬高的计算研究

波浪的方向分布对波浪的传播及其与工程结构物的作用都具有明显影响，目前现有的研究大多是基于单向波浪进行的。为了研究方向分布对群墩结构上的爬高影响，基于规则波浪与群墩作用的理论解，结合多向不规则波浪的造波方法，建立了多向不规则波浪与群墩作用的计算模型，同时进行了物理模型试验对模型的有效性进行了验证。系统地对群墩周围及表面上的波浪爬高进行了计算分析，结果表明，方向分布对波浪爬高具有较大的影响，且不同位置处的影响并不相同，在实际的工程设计中如果按照单向波浪计算，可能低估或者高估群墩周围的爬高。     

Numerical calculation of forces induced by short-crested waves on a vertical cylinder of arbitrary cross-section

Most off-shore oil platforms are supported by vertical cylinders extending to the ocean floor. An important problem in off-shore engineering is the calculation of the wave loading exerted on these vertical cylinders. Analytical solutions have been found for the case of plane incident waves incident on a circular cylinder by MacCamy and Fuchs [(1954), Wave forces on piles: a diffraction theory. U.S. Army Corps of Engineering, Beach Erosion Board, Technical Memorandum No. 69] and also for short-crested waves incident on a circular cylinder by Zhu [(1993), Diffraction of short-crested waves around a circular cylinder. Ocean Engng 20, 389–407]. However, for a cylinder of arbitrary cross-section, no analytic solutions currently exist. Au and Brebbia [(1983), Diffraction of water waves for vertical cylinders using boundary elements. Appl. Math. Modelling 7, 106–114] proposed an efficient numerical approach to calculate the wave loads induced by plane waves on vertical cylinders by using the boundary element method. However, wind-generated waves are better modelled by short-crested waves. Whether or not these short-crested waves can induce larger wave forces on a structure is of great concern to ocean engineers. In this paper wave loads, induced by short-crested incident waves, on a vertical cylinder of arbitrary cross-section are discussed. For a cylinder of certain cross-section, the wave loads induced by short-crested waves can be larger than those induced by plane waves with the same total wave number.     

Short-crested waves interaction with a concentric porous cylinder system with partially porous outer cylinder

In this paper, based on the linear wave theory, the interaction of short-crested waves with a concentric dual cylindrical system with a partially porous outer cylinder is studied by using the scaled boundary finite element method (SBFEM), which is a novel semi-analytical method with the advantages of combining the finite element method (FEM) with the boundary element method (BEM). The whole solution domain is divided into one unbounded sub-domain and one bounded sub-domain by the exterior cylinder. By weakening the governing differential equation in the circumferential direction, the SBFEM equations for both domains can be solved analytically in the radial direction. Only the boundary on the circumference of the exterior porous cylinder is discretized with curved surface finite elements. Meanwhile, by introducing a variable porous-effect parameter G, non-homogeneous materials caused by the complex configuration of the exterior cylinder are modeled without additional efforts. Comparisons clearly demonstrate the excellent accuracy and computational efficiency associated with the present SBFEM. The effects of the wide range wave parameters and the structure configuration are examined. This parametric study will help determine the various hydrodynamic effects of the concentric porous cylindrical structure.     

Benchmark computations of wave run-up on single cylinder and four cylinders by naoe-FOAM-SJTU solver

The benchmark simulations of wave run-up on a fixed single truncated circular cylinder and four circular cylinders are presented in this paper. Our in-house CFD solver naoe-FOAM-SJTU is adopted which is an unsteady two-phase CFD code based on the open source package OpenFOAM. The Navier-Stokes equations are employed as the governing equations, and the volume of fluid (VOF) method is applied for capturing the free surface. Monochromatic incident waves with the specified wave period and wave height are simulated and wave run-up heights around the cylinder are computed and recorded with numerical virtual wave probes. The relationship between the wave run-up heights and the incident wave parameters are analyzed. The numerical results indicate that the presented naoe-FOAM-SJTU solver can provide accurate predictions for the wave run-up on one fixed cylinder and four cylinders, which has been proved by the comparison of simulated results with experimental data.     

Wave run-up on a coaxial perforated circular cylinder

This paper describes a plane regular wave interaction with a combined cylinder which consists of a solid inner column and a coaxial perforated outer cylinder.The outer perforated surface is a thin porous cylinder with an annular gap between it and the inner cylinder.The non-linear boundary condition at the perforated wall is a prime focus in the study;energy dissipation at the perforated wall occurs through the resistance to the fluid across the perforated wall.Explicit analytical formulae are presented to calculate the wave run-up on the outer and inner surfaces of the perforated cylinder and the surface of the inner column.The theoretical results of the wave run-up are compared with previous experimental data.Numerical results have also been obtained:when the ratio of the annular gap between the two cylinders to incident wavelength(b-a)/L≤0.1,the wave run-up on the inner surface of the perforated cylinder and the surface of inner column can partially or completely exceed the incident wave height.     

Experimental study of interactions between multi-directional focused wave and vertical circular cylinder,part II: Wave force

We describe experiments with multi-directional focused waves interacted with a vertical circular cylinder in a 3D wave basin. The focus of this study is on the run-up of multi-directional focused waves, wave forces, and wave pressures on the cylinder. Part I, the study on wave run-up, has already been presented by Li et al. (2012). In this paper, the analysis of the wave force on the vertical cylinder is presented.In this experiment, a cylinder with 0.25 m in diameter was adopted and different wave parameters, such as focused wave amplitude, peak frequency, frequency bandwidth and directional spreading index, are considered. The model scale k_pa (k_p is the wave number corresponding to peak frequency, a is the radium of the cylinder) varies from 0.32 to 0.65. The maximum forces of multi-directional focused wave on cylinder were measured and investigated. The results showed that the wave parameters have a significant influence on the wave force, and that the spatial profile of the surface of multi-directional focused wave can also affect its force on the cylinder, which is different from two-dimensional wave. In addition, the ‘secondary loading cycle’ phenomenon was also observed and discussed. In our experiments, the ‘secondary loading cycles’ occur when kA > 0.36 for all cases. While in some referred small scale experiments, the secondary load cycles are observed even for kA = 0.2, when the waves are longer enough. To larger model scale, the pronounced secondary load cycle occurs with larger wave steepness waves.     

On diffraction and radiation problem for two cylinders in water of finite depth

The hydrodynamic problem arising form the interaction of linear water waves with a wave energy device consisting of two coaxial vertical cylinders of different radii is investigated. One cylinder is riding in waves, while another is submerged in fluid. By use of the method of separation of variables and the method of matched eigenfunction expansion, analytical expressions for the potentials are obtained. Using the expressions for the potentials, analytical expressions for the hydrodynamic coefficients and exciting forces/moments on the device are obtained. Numerical results of the hydrodynamic coefficients and exciting forces/moments are presented for some ratios of the radius of the submerged cylinder to that of the riding one. It is found that the radius of the submerged cylinder has a significant influence on the hydrodynamic coefficients and exciting forces/moments for relatively bigger radius of the submerged cylinder at low frequencies.     

Wave enhancement due to blockage in semi-submersible and TLP structures

An exact analytical method is described to solve the diffraction problem of a group of truncated vertical cylinders. In order to account for the interaction between the cylinders, Kagemoto and Yue's exact algebraic method is utilised (Kagemoto, H., Yue, D.K.P., 1986. Interactions among multiple three-dimensional bodies in water waves: an exact algebraic method. J Fluid Mech, 46, 129–139). The isolated cylinder diffraction potential is obtained using Garret's solution and evanescent mode solutions are derived in a similar manner (Garret, C.J.R., 1971. Wave forces on a circular dock. J Fluid Mech, 46, 129–139).Free surface elevations are calculated for an array of four cylinders and compared with experiments. Comparisons show good agreement.     

Solitary wave interactions with an array of two vertical cylinders

This paper addresses a numerical investigation of nonlinear waves interactions with an array of two surface-piercing vertical cylinders and the corresponding nonlinear hydrodynamic loads on each individual cylinder. The primary interest of this study is concentrated on the problem of three-dimensional scattering of solitary waves by cylinder arrays and the nonlinear interactions between scattered waves. The theoretical model adopted for simulation is the generalized Boussinesq two-equation model. The boundary-fitted coordinate transformation and multiple-grid technique are utilized here to simplify the computation domain and to facilitate the applications of the boundary conditions on the cylinder surfaces. The velocity potential, free-surface elevation and subsequent evolution of the scattered wave field are numerically evaluated. The hydrodynamic forces on each cylinder during wave impact are also determined. A study of the sheltering effect by the neighboring structures on wave loads is conducted. It is found that the presence of the neighboring cylinder has shown significant influence on the wave loads and the scattering of the primary incident waves. For two transversely arranged cylinders, the transverse force coefficient increases as the separation distance decreases.     

A quasi-cloaking phenomenon to reduce the wave drift force on an array of adjacent floating bodies

The mooring of offshore floating structures, such as offshore platforms, in large waves against drift forces and rotational moments is a challenging problem in offshore engineering. To accurately investigate such problems, called positioning problems, the time-averaged steady forces of the second order known as the wave drift forces must be taken into account. Fortunately, a cloaking phenomenon occurs under certain conditions and dramatically reduces the wave drift force acting on such a floating body, as previously reported by several researchers. In the diffraction problem of water waves, cloaking refers to the condition where there is no scattering in the form of radial outgoing waves. The reduction of wave drift force on a truncated cylinder with the occurrence of cloaking phenomenon has been numerically and experimentally confirmed. In this paper, the arrangement of several small circular cylinders at regular intervals in a circle concentric with a fixed floating body is considered as an effective means of reducing the wave drift force. Using a combination of a higher-order boundary element method (HOBEM) and wave interaction theory, the influences of the geometric parameters of the outer surrounding cylinders on the wave drift force and the total scattered-wave energy are systematically investigated and discussed. A quasi-cloaking phenomenon is first found and reported in the present study, which is beneficial and flexible for application in practical engineering. More than one quasi-cloaking trigger (where a trigger is an occurrence condition) can be found simply by varying the distance between the inner and outer floating bodies.