Sedimentological and geochemical evidence to elucidate an evaporitic–carbonate paleoenvironment, Middle Miocene Red Sea coast, Egypt

Lithologic succession, microscopic examination as well as X-ray diffraction and chemical data revealed that the surface Middle Miocene evaporites of Wadi Quei are composed of anhydrite beds intercalated with carbonate and green shale, whilst the subsurface evaporites of Gemsa locality are composed of gypsum, anhydrite, carbonates and celestite with a rare amount of halite. The anhydrite is found to be formed diagenetically after gypsum. The carbonate is interpreted as having been of biogenic origin. The strong smell of H₂S and golden crystals of pyrite at Wadi Quei beds are indications of the biogenic action of sulphate-reducing bacteria in the presence of organic matter. It is suggested that the evaporite sequence which was deposited in a supratidal sabkha environment is characterized by alkaline-reducing conditions. The presence of nodular gypsum at Gemsa locality is probably deposited in a supratidal environment with oscillation of sea level.     

Early and pervasive dolomitization by near-normal marine fluids: New lessons from an Eocene evaporative setting in Qatar

The upper Palaeocene–lower Eocene Umm er Radhuma Formation in the subsurface of Qatar is dominated by subtidal carbonate depositional packages overlain by bedded evaporites. In Saudi Arabia and Kuwait, peritidal carbonate depositional sequences with intercalated evaporites and carbonates in Umm er Radhuma have been previously interpreted to have been dolomitized via downward reflux of hypersaline brines. Here, textural, mineralogical and geochemical data from three research cores in Qatar are presented which, in contrast, are more consistent with dolomitization by near-normal marine fluids. Petrographic relationships support a paragenetic sequence whereby dolomitization occurred prior to the formation of all other diagenetic mineral phases, including chert, pyrite, palygorskite, gypsum, calcite and chalcedony, which suggests that dolomitization occurred very early. The dolomites occur as finely crystalline mimetic dolomites, relatively coarse planar-e dolomites, and coarser nonplanar dolomites, all of which are near-stoichiometric (50.3 mol% MgCO₃) and well-ordered (0.73). The dolomite stable isotope values (range −2.5‰ to +1‰; mean δ¹⁸O = −0.52‰) and trace element concentrations (Sr = 40 to 150 ppm and Na = 100 to 600 ppm) are compatible with dolomitization by near-normal seawater or mesohaline fluids. Comparisons between δ¹⁸O values from Umm er Radhuma dolomite and the overlying Rus Formation gypsum further suggest that dolomitization did not occur in fluids related to Rus evaporites. This study provides an example of early dolomitization of evaporite-related carbonates by near-normal seawater rather than by refluxing hypersaline brines from overlying bedded evaporites. Further, it adds to recent work suggesting that dolomitization by near-normal marine fluids in evaporite-associated settings may be more widespread than previously recognized.     

Silicification of sulphate evaporites and their carbonate replacements in Eocene marine sediments, Tunisia: two diagenetic trends

Samples of chert nodules, diagenetic carbonates and evaporites (gypsum/anhydrite) collected from the gypsiferous limestones of the Kef Eddour Member (Ypressian‐Priabonian) near Metlaoui and Sehib (Tunisia) show selective silicification with great variety in the silicified by‐products. Based on δ¹³C values, which support an organic origin for the carbon, carbonates replaced evaporites microbially through bacterial sulphate reduction. Observations and results suggest two scenarios for chert formation that are related to the rate and timing of diagenetic carbonate replacement of the evaporites (anhydrite/gypsum). In the absence of early diagenetic carbonate phases, silica with δ¹⁸O values from +25 to +28·6‰ [standard mean ocean water (SMOW)] replaced the outer parts of anhydrite nodules at pH < 9. In contrast, pore‐fluid pH values > 9 in the innermost parts of the anhydrite nodules prevented silica precipitation. The record of this chemical barrier is preserved in the microquartz rims and geode features that formed in the inner parts of the nodules after dissolution of the anhydrite nucleus. The microbial diagenetic replacement of evaporites (bacterial sulphate reduction) by carbonates (calcite, aragonite and dolomite) favoured silica replacement of carbonates rather than evaporites. Silica, with δ¹⁸O signature of +21 to +26‰ (SMOW), replaced carbonates on a volume‐for‐volume basis, yielding a more siliceous groundmass, and accounting for 90–95% of the nodules. The relatively higher δ¹⁸O values of quartz replacing anhydrite can be explained by a diagenetic fluid in equilibrium with mixed (meteoric/marine) to marine water. The lower δ¹⁸O values of the quartz that replaced the diagenetic carbonates are ascribed to flushing by meteoric water in a later diagenetic stage. The silica supply for chert formation could be derived from the reworked bio‐siliceous deposits (diatomites) to the west of the basin [vestiges of an opal‐CT precursor undetectable by X‐ray diffraction (XRD) were revealed by δ²⁹Si magic‐angle‐spinning nuclear magnetic resonance investigations], diagenesis of the extraformational and overlying clay‐rich beds (the host limestones are clay‐poor as shown by XRD measurements), and minor volcanogenic and hydrothermal contributions during early diagenetic stages.     

Evolution of late Triassic rift basin evaporites (Passaic Formation): Newark Basin, Eastern North America

The Passaic Formation of the late Triassic Newark Supergroup is 2700 m thick and was deposited in series of wide, deep to shallow lacustrine environments in the Newark rift basin (eastern North America). The Passaic Formation can be divided into lower, middle, and upper sections based on depositional structures, composition and the distribution and morphology of its evaporites. Evaporites formed as a result of syndiagenetic cementation and/or displacive processes. Evaporitive minerals now include gypsum and anhydrite, although other mineral species, such as glauberite, may have originally existed. Most of the evaporites of the Passaic Formation occur within massive red mudstone and siltstone lithologies in the form of diffuse cements, void-fillings, euhedral crystals, crystal clusters and nodules. These evaporites grew displacively within the fine siliciclastic matrix as a result of changes in the hydrochemical regimes of the rift basin. A well-developed upward increase in the amount of evaporite material is present in the Passaic Formation. This resulted from: (1) long-term, progressive increase in aridity, and (2) significant increase in evaporation surface area of the basin during its tectonic evolution. A nonmarine source for the evaporites is evident from the isotopic data. Sulphate δ³⁴S ranges from 11%. to 3.3%. CDT, while δ¹⁸O ranges from + 15.1%. to + 20.9%. SMOW, indicating derivation from early diagenetic oxidation of organic sulphur and pyrite within the organic-rich, lacustrine deposits. The ⁸⁷Sr/⁸⁶Sr ratios in sulphate are radiogenic (average 0.71211), showing the interaction of basin waters with detrital components and that the Newark Basin was isolated from the world ocean. Most of the original evaporites show evidence of diagenetic change to polycrystalline and polymineralic pseudomorphs now filled with recrystallized coarse-grained anhydrite (1–3 mm size) and low-temperature albite. Homogenization temperatures of fluid inclusions within the coarse-grained anhydrite indicate crystallization temperatures for anhydrite in the range of 150° to 280°C. Such elevated temperatures resulted from circulation of hot water in the basin. Later exhumation of these rocks caused partial to total replacement of anhydrite by gypsum in the upper part of the section. The resulting increase in volume due to hydration of anhydrite at shallow depths also emplaced non-evaporative satin-spar veins (fibrous gypsum) along bedding planes and in fractures. While the local geology of the Newark rift basin controlled the distribution of facies, the sedimentological development of the Passaic Formation evaporites resulted from the world-wide climatic aridity that prevailed during the late Triassic. because the Newark Basin sequence was only covered with about 3 km of sedimentary overburden that correspond to about 100°C and hence suggests that evaporites have experienced alteration by hot fluids. 5 As the Triassic marks the greatest evaporite formation world-wide and profound sense of parched continentality throughout the world existed before the final break-up of the Pangea, the Passaic Formation evaporites are an example of the influence of these palaeoclimatic conditions at the eastern margin of North America.     

A barred-basin marine evaporite in the Upper Proterozoic of the Amadeus Basin, central Australia

The Ringwood evaporite is part of the 900 m.y. old Bitter Springs Formation, a warm-water shallow-marine sequence of stromatolitic dolomite and limestone, microfossiliferous chert, red beds, quartzite, and evaporites. The evaporite at Ringwood comprises two parts: (i) a lower 127 m characterized by brecciated pyritic bituminous dolomite, together with smaller amounts of dolomite-gypsum breccia, friable chloritic dololutite, coarsely crystalline anhydrite, and satin-spar gypsum; and (ii) an upper 133 m which is similar except that bituminous dolomite forms only one bed, and the characteristic rock-type is dolomite-gypsum breccia. The evaporite is overlain by limestone breccia and massive stromatolitic limestone, interpreted as an algal reef. Gypsum is secondary after anhydrite, and the ratio of gypsum to anhydrite increases upwards. The evaporite shows none of the features of a sabkha or desiccated deep ocean basin deposit, and instead is interpreted as the filling of a barred basin which was cut off from the ocean by growth of an algal barrier reef. As circulation became restricted, bituminous dolomite deposited in the lagoon behind the reef, together with pyrite from the destruction by anaerobic bacteria of algal debris derived from the reef. With continued evaporation, brine concentration increased and gypsum precipitated. Occasional dust storms contributed wind-blown clay to the deposit. The barrier reef transgressed diachronously across the evaporite lagoon, and was eventually drowned when normal marine conditions became established. Burial of the evaporite to about 7000 m beneath the succeeding sediments of the Amadeus Basin converted gypsum to anhydrite, and formed chlorite by reaction of clay with dolomite. Late Palaeozoic tectonism folded and brecciated the rocks, and was followed by erosion which eventually exposed the evaporite to ingress of meteoric water. Hydration of anhydrite to gypsum ensued, the reaction becoming less complete with increasing depth from the ground surface.     

Dolomitization by penesaline sea water in Early Jurassic peritidal platform carbonates, Gibraltar, western Mediterranean

Peritidal carbonates of the Lower Jurassic (Liassic) Gibraltar Limestone Formation, which form the main mass of the Rock of Gibraltar, are replaced by fine and medium crystalline dolomites. Replacement occurs as massive bedded or laminated dolomites in the lower 100 m of an ≈460‐m‐thick platform succession. The fine crystalline dolomite has δ¹⁸Ο values either similar to, or slightly higher than, those expected from Early Jurassic marine dolomite, and δ¹³C values together with ⁸⁷Sr/⁸⁶Sr ratios that overlap with sea‐water values for that time, indicating that the dolomitizing fluid was Early Jurassic sea water. Absence of massive evaporitic minerals and/or evaporite solution‐collapse breccias in these carbonate rocks indicates that the salinity of sea water during dolomitization was below that of gypsum precipitation. The occurrence of peritidal facies, a restricted microbiota and rare gypsum pseudomorphs are also consistent with penesaline conditions (salinity 72–199‰). The medium crystalline dolomite has some δ¹⁸Ο and δ¹³C values and ⁸⁷Sr/⁸⁶Sr ratios similar to those of Early Jurassic marine dolomites, which indicates that ambient sea water was again a likely dolomitizing fluid. However, the spread of δ¹⁸Ο, δ¹³C and ⁸⁷Sr/⁸⁶Sr values indicates that dolomitization occurred at slightly increased temperatures as a result of shallow (≈500 m) burial or that dolomitization was multistage. These data support the hypothesis that penesaline sea water can produce massive dolomitization in thick peritidal carbonates in the absence of evaporite precipitation. Taking earlier models into consideration, it appears that replacement dolomites can be produced by sea water or modified sea water with a wide range of salinities (normal, penesaline to hypersaline), provided that there is a driving mechanism for fluid migration. The Gibraltar dolomites confirm other reports of significant Early Jurassic dolomitization in the western Tethys carbonate platforms.     

Late-stage calcites in the Permian Capitan Formation and its equivalents, Delaware Basin margin, west Texas and New Mexico: evidence for replacement of precursor evaporites

Comparison of Upper Guadalupian fore-reef, reef and back-reef strata from outcrops in the Guadalupe Mountains with equivalent subsurface cores from the northern and eastern margins of the Delaware Basin indicates that extensive evaporite diagenesis has occurred in both areas. In both surface and subsurface sections, the original sediments were extensively dolomitized and most primary and secondary porosity was filled with anhydrite. These evaporites were emplaced by reflux of evaporitic fluids from shelf settings through solution-enlarged fractures and karstic sink holes into the underlying strata. Outcrop areas today, however, contain no preserved evaporites in reef and fore-reef sections and only partial remnants of evaporites are retained in back-reef settings. In their place, these rocks contain minor silica, very large volumes of coarse sparry calcite and some secondary porosity. The replacement minerals locally form pseudomorphs of their evaporite precursors and, less commonly, contain solid anhydrite inclusions. Some silicification, dissolution of anhydrite and conversion of anhydrite to gypsum have occurred in these strata where they are still buried at depths in excess of 1 km; however, no calcite replacements were noted from any subsurface core samples. Subsurface alteration has also led to the widespread, late-stage development of large- and small-scale dissolution breccias. The restriction of calcite cements to very near-surface sections, petrographic evidence that the calcites post-date hydrocarbon emplacement, and the highly variable but generally ‘light’carbon and oxygen isotopic signatures of the spars all indicate that calcite precipitation is a very late diagenetic (telogenetic) phenomenon. Evaporite dissolution and calcitization reactions have only taken place where Permian strata were flushed with meteoric fluids as a consequence of Tertiary uplift, tilting and breaching of regional hydrological seals. A typical sequence of alteration involves initial corrosion of anhydrite, one or more stages of hydration/dehydration during conversion to gypsum, dissolution of gypsum and precipitation of sparry calcite. Such evaporite dissolution and replacement processes are probably continuing today in near-outcrop as well as deeper settings. This study emphasizes the potential importance of telogenetic processes in evaporite diagenesis and in the precipitation of carbonate cements. The extensive mineralogical and petrophysical transformations which these strata have undergone during their uplift indicates that considerable caution must be exercised in using surface exposures to interpret subsurface reservoir parameters in evaporitic carbonate rocks.     

Diagenetic origin of Basal Anhydrite in the Cretaceous Maha Sarakham salt: Khorat Plateau, NE Thailand

Development of a diagenetic anhydrite bed at the base of the Cretaceous Maha Sarakham Saline Formation (the `Basal Anhydrite' member) of the Khorat Plateau in north-eastern Thailand took place due to leaching and/or pressure dissolution of salt at the contact between an underlying active sandstone aquifer system and an overlying massive halite-dominated evaporite sequence. Basal evaporites composed of halite with intercalated anhydrite of the latter sequence are undergoing dissolution as a result of subsurface flushing, with anhydrite produced as the insoluble residue. The result is a 1·1 m thick interval of nodular anhydrite displaying unique, basin-wide continuity. Observed textures, petrographic features and chemical data from the anhydrite and associated authigenic minerals support the origin of the Basal Anhydrite Member as an accumulation residue from the dissolution of the Maha Sarakham salts. Petrographically, the anhydrite in this unit is made up of crystals that are blocky and recrystallized, sheared, generally elongated and broken, and is bounded at the bottom by organic-rich stylolite surfaces. Authigenic and euhedral dolomite and calcite crystals are associated with the anhydrite. Traces of pyrite, galena and chalcopyrite are present along the stylolite surfaces suggesting supply of fresh water from the underlying sandstone at highly reducing conditions of burial. The δ<sup>34</sup>S of sulphate in the Basal Anhydrite averages 15 ‰ (CDT) and falls within the isotopic composition of the anhydrite in the Cretaceous Maha Sarakham Formation proper and the Cretaceous values of marine evaporites. Measured δ<sup>18</sup>O in dolomite range from ?4·37 to ?14·26‰ (PDB) suggesting a re-equilibration of dolomite with basinal water depleted in <sup>18</sup>O and possible recrystallization of dolomite under relatively elevated temperatures. The δ<sup>13</sup>C, however, varies from +1·57 to ?2·53‰ (PDB) suggesting a contribution of carbon from oxidation of organic matter. This basal anhydrite bed, similar to basinwide beds found at the bottom of many giant evaporite sequences, has always been considered to be depositional. Here, at the base of the Maha Sarakham Formation, we demonstrate that the anhydrite is diagenetic in origin and was formed by accumulation of original anhydrite by dissolution of interbedded halite from waters circulating though the underlying aquifer: it represents an `upside-down' caprock.     

Neogene evaporites in desert volcanic environments: Atacama Desert, northern Chile

The Upper Miocene and Pliocene evaporite deposits of the Atacama Desert of northern Chile (Hilaricos and Soledad Formations) are among the few non‐marine evaporites in which aridity not only formed the deposits, but has also preserved them almost unaltered under near‐surface conditions. These deposits are largely composed of displacive Ca sulphate and halite together with minor amounts of glauberite, thenardite and polyhalite. However, at the base and top of these deposits, there are also beds of gypsum crystal pseudomorphs that originally formed as free‐growth forms within shallow brine bodies, rather than as displacive sediments. The halite is present as interstitial cement, displacive cubes and shallow‐water, bottom‐growth chevron crusts. Most of the calcium sulphate is presently anhydrite, pseudomorphous after gypsum, that was the primary depositional sulphate mineral. The secondary anhydrite formed under early diagenetic conditions after slight burial (some metres) resulting from the effect of strongly evolved pore brines. The anhydrite has been preserved without rehydration during late diagenetic and exhumation stages on account of the arid environment of the Atacama Desert. Both the Hilaricos and the Soledad Formations contain geochemical markers indicating that these Neogene evaporites had a largely non‐marine origin. Bromine content in the halite is very low (few p.p.m.), indicating neither a sedimentological relation with sea water nor the likelihood of direct recycling of prior marine halites. Moreover, the δ³⁴S of sulphates (+4·5‰ to +9‰) also reflects a non‐marine origin, with a strong volcanic influence, although some recycling of Mesozoic marine sulphates cannot be ruled out. δ³⁴S of dissolved sulphate from hot springs and streams in the area commonly displays positive values (+2‰ to +10‰). Leaching of oxidized sulphur and chlorine compounds from volcanoes and epithermal ore bodies, very common in the associated drainage areas, have been the main contribution to the accumulation of evaporites. The sedimentary and diagenetic evolution of the Hilaricos and Soledad evaporites (based on lithofacies analysis) provides information about the palaeohydrological conditions in the Central Depression of northern Chile during the Neogene. In addition, the diagenesis and exhumation history of these evaporites confirms the persistence of strongly arid conditions from Late Miocene until the present. A final phase of tectonism took place permitting the internal drainage to change and open to the sea, resulting in dissolution and removal of a significant portion of these deposits. Despite the extensive dissolution, the remaining evaporites have undergone little late exhumational hydration.     

Evaporative systems and diagenetic patterns in the Calatayud Basin (Miocene,central Spain)

This paper concerns the evaporite units, depositional systems, cyclicity, diagenetic products and anhydritization patterns of the Calatayud Basin (nonmarine, Miocene, central Spain). In outcrop, the sulphate minerals of these shallow lacustrine evaporites consist of primary and secondary gypsum, the latter originating from the replacement of anhydrite and glauberite. In the evaporative systems of this basin, gypsiferous marshes of low salinity can be distinguished from central, saline lakes of higher salinity. In the gypsiferous marsh facies, the dominant, massive, bioturbated gypsum was partly replaced by synsedimentary chert nodules and siliceous crusts. In the saline lake facies, either cycles of gypsiferous lutite‐laminated gypsarenite or irregular alternations of laminated gypsum, nodular and banded glauberite, thenardite and nodular anhydrite precipitated. Early replacement of part of the glauberite by anhydrite also occurred. Episodes of subaerial exposure are represented by: (1) pedogenic carbonates (with nodular magnesite) and gypsiferous crusts composed of poikilitic crystals; and (2) nodular anhydrite, which formed in a sabkha. Additionally, meganodular anhydrite occurs, which presumably precipitated from ascending, highly saline solutions. The timing of anhydritization was mainly controlled by the salinity of the pore solutions, and occurred from the onset of deposition to moderate burial. Locally, a thick (>200 m) sequence of gypsum cycles developed, which was probably controlled by climatic variation. A trend of upward‐decreasing salinity is deduced from the base to the top of the evaporite succession.     

Sedimentology of the Cretaceous Maha Sarakham evaporites in the Khorat Plateau of northeastern Thailand

Evaporites of the Cretaceous to early Tertiary Maha Sarakham Formation on the Khorat Plateau of southeast Asia (Thailand and Laos) are composed of three depositional members that each include evaporitic successions, each overlain by non-marine clastic red beds, and are present in both the Khorat and the Sakon Nakhon sub-basins. These two basins are presently separated by the northwest-trending Phu Phan anticline. The thickness of the formation averages 250 m but is up to 1.1 km thick in some areas. In both basins it thickens towards the basin centre suggesting differential basin subsidence preceding or during sedimentation. The stratigraphy, lithological character and mineralogy of the evaporites and clastics are identical in both basins suggesting that they were probably connected during deposition. Evaporites include thick successions of halite, anhydrite and a considerable accumulation of potassic minerals (sylvite and carnallite) but contain some tachyhydrite, and minor amounts of borates. During the deposition of halite the basin was subjected to repeated inflow of fresher marine water that resulted in the formation of anhydrite marker beds. Sedimentary facies and textures of both halite and anhydrite suggest deposition in a shallow saline-pan environment. Many halite beds, however, contain a curious `sieve-like' fabric marked by skeletal anhydrite outlines of gypsum precursor crystals and are the product of early diagenetic replacement by halite of primary shallow-water gypsum. The δ³⁴S isotopic values obtained from different types of anhydrite interbedded with halite range from 14.3‰ to 17.0‰ (CDT), suggesting a marine origin for this sulphate. Bromine concentration in the halite of the Lower Member begins around 70 ppm and systematically increases upward to 400 ppm below the potash-rich zone, also suggesting evaporation of largely marine waters. In the Middle Member the initial concentration of bromine in halite is 200 ppm, rising to 450 ppm in the upper part of this member. The bromine concentration in the Upper Member exhibits uniform upward increase and ranges from 200 to 300 ppm. The presence of tachyhydrite in association with the potassic salts was probably the result of: (1) the large volumes of halite replacement of gypsum, on a bed by bed basis, releasing calcium back into the restricted waters of the basin; and (2) early hydrothermal input of calcium chloride-rich waters. The borates associated with potash-rich beds likely resulted from erosion and influx of water from surrounding granitic terrains; however, hydrothermal influx is also possible. Interbedded with the evaporites are non-marine red beds that are also evaporative, with displacive anhydrite nodules and beds and considerable amounts of displacive halite. The δ³⁴S isotopic values of this anhydrite have non-marine values, ranging from 6.4‰ to 10.9‰ (CDT). These data indicate that the Khorat and Sakhon Nakhon basins underwent periods of marine influx due to relative world sea-level rise but were sporadically isolated from the world ocean.     

Environmental and sequence stratigraphic implications of anhydrite textures: A case from the Lower Triassic of the Central Persian Gulf

The Lower Triassic Kangan Formation in the Persian Gulf (South Pars Gas Field) and its adjacent areas are composed of carbonate–evaporite sequences. These sediments were deposited in a shallow marine homoclinal ramp. Study of the anhydrite-bearing intervals shows various structures and textures. The anhydrite structures are mainly bedded, massive, chicken-wire and nodular type and the main textures are felted, sparse crystal, needle shape, lath shape, equant and fibrous. Pervasive and poikilotopic cement together with replacement and porphyroblastic gypsum are accounted as the most common diagenetic features in anhydrite. Evaluation of anhydrite occurrences and features support both primary and secondary formations. The nodular to chicken-wire anhydrite formed under synsedimentary sabkha conditions, whereas anhydrite cements occurred during the late stages of diagenesis (shallow burial stage). Massive to bedded anhydrite could have been formed under subaqueous conditions or originated by coalescing and continued growth of anhydrite nodules in the sabkha zone. Anhydrite fabrics impose a significant control on the reservoir quality of the Kangan carbonates at the South Pars Gas Field. Thick massive and bedded anhydrite could have been formed as an intraformational seals and anhydrite cements occluded pore spaces and reduced the poroperm values. The sequence stratigraphic analysis revealed two depositional sequences in the studied intervals, which are composed of TST and HST. Investigation of anhydrite throughout depositional sequences indicates a change in the content and style of anhydrite texture. Anhydrite content (volume) decreases upward through transgressive system tract (sea-level rise) whereas, it enhances during highstand system tract (sea-level fall). Pervasive and poikilotopic anhydrite cements together with replacement by anhydrite are prevalent features during transgressive and early highstand system tract. At the late HST, with a progradational stacking pattern, anhydrite value increases and felted, radial, equant, crystalline and mosaic texture are the most common anhydrite fabrics. Sequence boundaries that indicate maximum sea level fall and exposure of successions are marked by the broad anhydrite deposits with massive to bedded and chicken-wire structures and various textures that located in late HST package. There is an unambiguous relationship between the microfacies associations, the evaporite textures, and the sea-level fluctuations. This relationship could lead to a predictable pattern that can be of use as a general guide for the sequence stratigraphic interpretations in the area.     

Geothermal evolution of the evaporite-bearing sequences of the Lesser Himalaya, India

Neoproterozoic evaporites occurring in the western part of the Lesser Himalaya in India, coeval to Pakistan, Iran and Oman evaporites, were investigated in order to understand the degree of metamorphism in them and in associated carbonates. The evaporite-bearing succession occurs in association of phyllite, quartzite and carbonate near the Main boundary Thrust. In order to learn the details about the burial history of these evaporite rocks, the Kübler illite crystallinity index (KI) was measured from the illite peaks of the clay minerals separated from the evaporite rocks and it indicated that this section has reached a maximum temperature up to ~300°C. Microthermometric measurements on fluid inclusions present in the associated dolomite show range of homogenization temperatures (Th), from 220 to 280°C, well within the temperature range of anchizone metamorphism. Additionally, dolomite shows a highly negative δ¹⁸O signature (mean, −15.5‰_PDB), which is more likely related to diagenetic overprint from deep burial conditions rather than original precipitation from ¹⁸O-depleted seawater. The evaporites (sulfates and chloride) probably were transformed many times after their precipitation, but they have retained only the features developed during last one or two phases of alteration and deformation as they are continuously susceptible to minor changes in temperatures and stresses. The final temperature range of 42–78°C in sulfates and chloride gives thermal approximation estimate that is not in concordance with the thermal history of the basin and are likely related to conversion of anhydrite into gypsum and recrystallization of halite during exhumation. Highly negative oxygen isotopic composition, homogenization temperatures and KI values equivalent to a high anchizone metamorphism suggest a burial depth of ~10 km for these terminal Neoproterozoic evaporite-bearing sequences of the Lesser Himalaya.     

Replacement of evaporites within the Permian Park City Formation, Bighorn Basin, Wyoming, USA

The Permian Park City Formation consists of cyclically bedded subtidal to supratidal carbonates, cherts and siltstones. Early diagenesis of Park City Formation carbonates occurred under the influence of waters ranging from evaporative brines to dilute meteoric solutions and resulted in evaporite emplacement (syndepositional nodules and cements), as well as dolomitization, silicification and leaching of carbonate grains. Major differences are seen, however, in the diagenetic patterns of subsurface and surface sections of Park City Formation rocks. Subsurface samples are characterized by extensively preserved evaporite crystals and nodules, and preserve evidence of significant silicification (chert, chalcedony and megaquartz) and minor calcitization of evaporites. In outcrop sections, the evaporites are more poorly preserved, and have been replaced by silica and calcite and also leached. The resultant mouldic porosity is filled with widespread, very coarse, blocky calcite spar. These replacements appear to be multistage phenomena. Field and petrographic evidence indicates that silicification involved direct replacement of evaporites and occurred during the early stages of burial prior to hydrocarbon migration. Siliceous sponge spicules provided a major source of silica, and the fluids involved in replacement were probably a mixture of marine and meteoric waters. A second period of replacement and minor calcitization is inferred to have occurred during deep burial (under the influence of thermochemical sulphate reduction), although the presence of hydrocarbons probably retarded most other diagenetic reactions during this time interval. The major period of evaporite diagenesis, however, occurred during late stage uplift. The late stage replacement and pore-filling calcites have δ¹³C values ranging from 0·5 to -25·3%, and δ¹⁸O values of -16·1 to -24·3₀ (PDB), reflecting extensive modification by meteoric water. Vigorous groundwater flow, associated with mid-Tertiary block faulting, led to migration of meteoric fluids through the porous carbonates to depths of several kilometres. These waters reacted with the in situ hydrocarbon-rich pore fluids and evaporite minerals, and precipitated calcite cements. The Tosi Chert appears to have been an even more open system to fluid migration during its burial and has undergone a much more complex diagenetic history, as evidenced by multiple episodes of silicification, calcitization (ferroan and non-ferroan), and hydrocarbon emplacement. The multistage replacement processes described here do not appear to be restricted to the Permian of Wyoming. Similarly complex patterns of alteration have been noted in the Permian of west Texas, New Mexico, Greenland and other areas, as well as in strata of other ages. Thus, multistage evaporite dissolution and replacement may well be the norm rather than the exception in the geological record.     

Rise in seawater sulphate concentration associated with the Paleoproterozoic positive carbon isotope excursion: evidence from sulphate evaporites in the ∼2.2–2.1 Gyr shallow‐marine Lucknow Formation,South Africa

Abstract Past oceanic sulphate concentration is important for understanding how the oceans’ redox state responded to atmospheric oxygen levels. The absence of extensive marine sulphate evaporites before ～1.2 Gyr probably reflects low seawater sulphate and/or higher carbonate concentrations. Sulphate evaporites formed locally during the 2.22–2.06 Gyr Lomagundi positive δ¹³C excursion. However, the ～2.2–2.1 Gyr Lucknow Formation, South Africa, provides the first direct evidence for seawater sulphate precipitation on a carbonate platform with open ocean access and limited terrestrial input. These marginal marine deposits contain evidence for evaporite molds, pseudomorphs after selenite gypsum, and solid inclusions of Ca‐sulphate in quartz. Carbon and sulphur isotope data match the global record and indicate a marine source of the evaporitic brines. The apparent precipitation of gypsum before halite requires ≥2.5 mm L^?1 sulphate concentration, higher than current estimates for the Paleoproterozoic. During the Lomagundi event, which postdates the 2.32 Gyr initial rise in atmospheric oxygen, seawater sulphate concentration rose from Archean values of ≤200 μm L^?1, but dropped subsequently because of higher pyrite burial rates and a lower oceanic redox state.     

Origin of polyhalite deposits in the Zechstein (Upper Permian) Zdrada platform (northern Poland)

Polyhalite deposits in the Zechstein (Upper Permian) of northern Poland occur in the Lower Werra Anhydrite. In the Zdrada Sulphate Platform, the polyhalite appears to be a very early replacement of anhydrite. The replacement was caused by the halite-precipitating brines which contained potassium and magnesium ions. The formation of polyhalite was preceded by the syndepositional anhydritization of the original gypsum deposit which has often preserved its primary textures. This anhydritization on the platform and its slopes was a reaction of the precipitated gypsum in a hydrologically open evaporite basin, with brines of salt basins adjacent to the sulphate platform. These brines, when nearly saturated with respect to halite, and potassium and magnesium rich, reacted with anhydrite to precipitate polyhalite along the slopes of the Zdrada Platform. The oxygen and sulphur isotopic compositions of sulphate evaporites indicate that marine solutions were the only source of sulphate ions supplied to the Zechstein basin, and that anhydrite was transformed to polyhalite by reaction with marine brines more concentrated than those that precipitated precursor calcium sulphate minerals.     

塔里木盆地北部丘里塔格群(寒武系至奥陶系)白云岩的成因

本文通过详细岩石学及地球化学研究,探讨了塔里木盆地丘里塔格群(寒武至奥陶系)白云岩的成因。研究表明藻纹层白云岩、微晶白云岩及颗粒白云岩中的颗粒为近地表准同生白云化的产物。结晶白云岩(细晶以上)及颗粒白云岩中的中粗晶白云岩胶结物是深埋藏成岩环境的产物。并对埋藏白云化的镁离子来源及搬运机理进行了探讨。     

Multiepisodic evaporite sedimentation as an indicator of palaeogeographical evolution in foreland basins (South‐eastern Pyrenean basin,Early–Middle Eocene)

Extensive deposition of marine evaporites occurred during the Early–Middle Eocene in the South‐eastern Pyrenean basin (north‐east Spain). This study integrates stratigraphic and geochemical analyses of subsurface data (oil wells, seismic profiles and gravity data) together with field surveys to characterize this sedimentation in the foredeep and adjacent platform. Four major evaporite units were identified. The oldest was the Serrat Evaporites unit, with a platform‐slope‐basin configuration. Thick salina and sabkha sulphates accumulated on the platform, whereas resedimented and gravity‐derived sulphates were deposited on the slope, and salt and sulphates were deposited in the deep basin. In the subsequent unit (Vallfogona evaporites), thin sulphates formed on the platform, whereas very thick siliciclastic turbidites accumulated in the foredeep. However, some clastic gypsum coming from the platform (gypsarenites and gypsum olistoliths) was intercalated in these turbidites. The following unit, the Beuda Gypsum Formation developed in a sulphate platform‐basin configuration, where the topography of the depositional surface had become smooth. The youngest unit, the Besalú Gypsum, formed in a shallow setting. This small unit provides the last evidence of marine influence in a residual basin. Sulphur and oxygen isotope compositions are consistent with a marine origin for all evaporites. However, δ³⁴S and δ¹⁸O values also suggest that, except for the oldest unit (Serrat Evaporites), there was some sulphate recycling from the older into the younger units. The South‐eastern Pyrenean basin constitutes a fine example of a foreland basin that underwent multiepisodic evaporitic sedimentation. In the basin, depositional factors evolved with time under a structural control. Decreasing complexity is observed in the lithofacies, as well as in the depositional models, together with a diminishing thickness of the evaporite units.     

Massive dolomitization of a late Miocene carbonate platform: a case of mixed evaporative brines with meteoric water,Nijar, Spain

Late Miocene platform carbonates from Nijar, Spain, have been extensively dolomitized. Limestones are present in the most landward parts of the platform, in stratigraphically lower units and topographically highest outcrops, suggesting that dolomitizing fluids were derived from the adjacent Nijar Basin. The dolomite crystals range from <10 to ≈100 μm existing as both replacements and cements. Na, Cl and SO₄ concentrations in the dolomites range from 200 to 1700 p.p.m., 250–650 p.p.m., and 600–7000 p.p.m., respectively, comparable with other Tertiary and modern brine dolomite values, and also overlapping values from mixing-zone dolomites. Sr concentrations range between 50 and 300 p.p.m., and the molar Sr/Ca ratios of dolomitizing fluids are estimated to range between 7× seawater brine to freshwater ratios. The δ¹⁸O and δ¹³C of the dolomites range from ?1·0 to +4·2‰ PDB, and ?4·0 to +2·0‰ PDB, respectively. ⁸⁷Sr/⁸⁶Sr values (0·70899–0·70928) of the dolomites range from late Miocene seawater to values greater than modern seawater. Mixtures of freshwater with seawater and evaporative brines probably precipitated the Nijar dolomites. Modelled covariations of molar Sr/Ca vs. δ¹⁸O and Na/Ca vs. δ¹⁸O from these mixtures are consistent with those of the proposed Nijar dolomitizing fluids. Complete or partial dolomite recrystallization is ruled out by well preserved CL zoning, nonstoichiometry and quantitative water–rock interaction modelling of covariations of Na vs. Sr and δ¹⁸O vs. δ¹³C. The possibility of multiple dolomitization events induced by evaporative brines, seawater and freshwater, respectively, is consistent with mineral-mineral mixing modelling. The basin-derived dolomitizing brines probably mixed with freshwater in the Nijar Basin or mixed with fresh groundwater in the platform, and were genetically related either to deposition of the Yesares gypsum or the Feos gypsum. Dolomitization occurred during either the middle Messinian or the early upper Messinian. Nijar dolomitization models may be applicable to dolomitization of other late Miocene platform carbonates of the western Mediterranean. Moreover, the Nijar models may offer an analogue for more ancient evaporite-absent platform carbonates fringing evaporite basins.