Flexural uplift of the Stara Planina range, central Bulgaria

The Stara Planina is an E–W-trending range within the Balkan belt in central Bulgaria. This topographically high mountain range was the site of Mesozoic through early Cenozoic thrusting and convergence, and its high topography is generally thought to have resulted from crustal shortening associated with those events. However, uplift of this belt appears to be much younger than the age of thrusting and correlates instead with the age of Pliocene–Quaternary normal faulting along the southern side of the range. Flexural modelling indicates the morphology of the range is consistent with flexural uplift of footwall rocks during Pliocene–Quaternary displacement on S-dipping normal faults bounding the south side of the mountains, provided that the effective elastic plate thickness of 12  km under the Moesian platform is reduced to about 3  km under the Stara Planina. This small value of elastic plate thickness under the Stara Planina is similar to values observed in the Basin and Range Province of the western United States, and suggests that weakening of the lithosphere is due to heating of the lithosphere during extension, perhaps to the point that large-scale flow of material is possible within the lower crust. Because weakening is observed to affect the Moesian lithosphere for ≈10  km beyond (north of) the surface expression of extension, this study suggests that processes within the uppermost mantle, such as convection, play an active role in the extension process. The results of this study also suggest that much of the topographic relief in thrust belts where convergence is accompanied by coeval extension in the upper plate (or 'back arc'), such as in the Apennines, may be a flexural response to unloading during normal faulting, rather than a direct response to crustal shortening in the thrust belt.     

Tectonic controls on a large landslide complex: Williams Fork Mountains near Dillon, Colorado

An extensive ( 25 km²) landslide complex covers a large area on the west side of the Williams Fork Mountains in central Colorado. The complex is deeply weathered and incised, and in most places geomorphic evidence of sliding (breakaways, hummocky topography, transverse ridges, and lobate distal zones) are no longer visible, indicating that the main mass of the slide has long been inactive. However, localized Holocene reactivation of the landslide deposits is common above the timberline (at about 3300 m) and locally at lower elevations. Clasts within the complex, as long as several tens of meters, are entirely of crystalline basement (Proterozoic gneiss and granitic rocks) from the hanging wall of the Laramide (Late Cretaceous to Early Tertiary), west-directed Williams Range thrust, which forms the western structural boundary of the Colorado Front Range. Late Cretaceous shale and sandstone compose most footwall rocks. The crystalline hanging-wall rocks are pervasively fractured or shattered, and alteration to clay minerals is locally well developed. Sackung structures (trenches or small-scale grabens and upslope-facing scarps) are common near the rounded crest of the range, suggesting gravitational spreading of the fractured rocks and oversteepening of the mountain flanks. Late Tertiary and Quaternary incision of the Blue River Valley, just west of the Williams Fork Mountains, contributed to the oversteepening. Major landslide movement is suspected during periods of deglaciation when abundant meltwater increased pore-water pressure in bedrock fractures.A fault-flexure model for the development of the widespread fracturing and weakening of the Proterozoic basement proposes that the surface of the Williams Range thrust contains a concave-downward flexure, the axis of which coincides approximately with the contact in the footwall between Proterozoic basement and mostly Cretaceous rocks. Movement of brittle, hanging-wall rocks through the flexure during Laramide deformation pervasively fractured the hanging-wall rocks.     

Structural development of the Tertiary fold-and-thrust belt in east Oscar II Land, Spitsbergen

The Tertiary deformation in east Oscar II Land, Spitsbergen, is compressional and thin-skinned, and includes thrusts with ramp-flat geometry and associated fault-bend and fault-propagation folds. The thrust front in the Mediumfjellct-Lappdalen area consists of intensely deformed Paleozoic and Mesozoic rocks thrust on top of subhorizontal Mesozoic rocks to the east. The thrust front represents a complex frontal ramp duplex in which most of the eastward displacement is transferred from sole thrusts in the Permian and probably Carboniferous strata to roof thrusts in the Triassic sequence. The internal geometries in the thrust front suggest a complex kinematic development involving not only simple 'piggy-back', in-sequencc thrusting, but also overstep as well as out-of-sequence thrusting. The position of the thrust front and across-strike variation in structural character in east Oscar II Land is interpreted to be controlled by lithological (facies) variations and/or pre-existing structures, at depth, possibly cxtensional faults associated with the Carboniferous graben system.     

Modern and ancient fluvial megafans in the foreland basin system of the central Andes, southern Bolivia: implications for drainage network evolution in fold-thrust belts

ABSTRACT Fluvial megafans chronicle the evolution of large mountainous drainage networks, providing a record of erosional denudation in adjacent mountain belts. An actualistic investigation of the development of fluvial megafans is presented here by comparing active fluvial megafans in the proximal foreland basin of the central Andes to Tertiary foreland‐basin deposits exposed in the interior of the mountain belt. Modern fluvial megafans of the Chaco Plain of southern Bolivia are large (5800–22 600 km²), fan‐shaped masses of dominantly sand and mud deposited by major transverse rivers (Rio Grande, Rio Parapeti, and Rio Pilcomayo) emanating from the central Andes. The rivers exit the mountain belt and debouch onto the low‐relief Chaco Plain at fixed points along the mountain front. On each fluvial megafan, the presently active channel is straight in plan view and dominated by deposition of mid‐channel and bank‐attached sand bars. Overbank areas are characterized by crevasse‐splay and paludal deposition with minor soil development. However, overbank areas also contain numerous relicts of recently abandoned divergent channels, suggesting a long‐term distributary drainage pattern and frequent channel avulsions. The position of the primary channel on each megafan is highly unstable over short time scales. Fluvial megafans of the Chaco Plain provide a modern analogue for a coarsening‐upward, > 2‐km‐thick succession of Tertiary strata exposed along the Camargo syncline in the Eastern Cordillera of the central Andean fold‐thrust belt, about 200 km west of the modern megafans. Lithofacies of the mid‐Tertiary Camargo Formation include: (1) large channel and small channel deposits interpreted, respectively, as the main river stem on the proximal megafan and distributary channels on the distal megafan; and (2) crevasse‐splay, paludal and palaeosol deposits attributed to sedimentation in overbank areas. A reversal in palaeocurrents in the lowermost Camargo succession and an overall upward coarsening and thickening trend are best explained by progradation of a fluvial megafan during eastward advance of the fold‐thrust belt. In addition, the present‐day drainage network in this area of the Eastern Cordillera is focused into a single outlet point that coincides with the location of the coarsest and thickest strata of the Camargo succession. Thus, the modern drainage network may be inherited from an ancestral mid‐Tertiary drainage network. Persistence and expansion of Andean drainage networks provides the basis for a geometric model of the evolution of drainage networks in advancing fold‐thrust belts and the origin and development of fluvial megafans. The model suggests that fluvial megafans may only develop once a drainage network has reached a particular size, roughly 10⁴ km²– a value based on a review of active fluvial megafans that would be affected by the tectonic, climatic and geomorphologic processes operating in a given mountain belt. Furthermore, once a drainage network has achieved this critical size, the river may have sufficient stream power to prove relatively insensitive to possible geometric changes imparted by growing frontal structures in the fold‐thrust belt.     

Fluvial deposition during transition from flexural to dynamic subsidence in the Cordilleran foreland basin: Ericson Formation,Western Wyoming,USA

The Ericson Formation was deposited in the distal foredeep of the Cordilleran foreland basin during Campanian time. Isopach data show that it records early dynamic subsidence and the onset of basin partitioning by Laramide uplifts. The Ericson Formation is well exposed around the Rock Springs uplift, a Laramide structural dome in southwestern Wyoming; the formation is thin, regionally extensive, and does not display the wedge‐shaped geometry typical of foredeep deposits. Sedimentation in this area was controlled both by activity in the thrust belt and by intraforeland tectonics. The Ericson Formation is ideally situated both spatially and temporally to study the transition from Sevier to Laramide (thin‐ to thick‐skinned) deformation which corresponded to the shift from flexural to dynamic subsidence and the demise of the Cretaceous foreland basin system. We establish the depositional age of the Ericson Formation as ca. 74 Ma through detrital zircon U–Pb analysis. Palaeocurrent data show a generally southeastward transport direction, but northward indicators near Flaming Gorge Reservoir suggest that the intraforeland Uinta uplift was rising and shedding sediment northward by late Campanian time. Petrographic data and detrital zircon U–Pb ages indicate that Ericson sediment was derived from erosion of Proterozoic quartzites and Palaeozoic and Mesozoic quartzose sandstones in the Sevier thrust belt to the west. The new data place temporal and geographic constraints on attempts to produce geodynamic models linking flat‐slab subduction of the oceanic Farallon plate to the onset of the Laramide orogenic event.     

Tectonic and eustatic controls on Pliocene accommodation space along the front of the southern Apennine thrust‐belt (Basilicata,southern Italy)

The stratigraphical organization of the Pliocene thrust‐top deposits cropping out at the front of the Southern Apennine thrust‐belt has been debated for a long time taking a great importance in the context of the geodynamics of the Central Mediterranean area. During this time, spreading episodes in the Apennine backarc zone alternate with important phases of overthrusting in the thrust‐belt. As a consequence, the Pliocene succession appears to be arranged in a series of stacked units, recording the poliphase tectonic history that leads to the building of the front of the southern Apennine thrust‐belt. Although there is not yet an accordance on the nature and position of the main unconformities bounding the thrust‐top units, all authors agree that the creation of new accommodation space is mainly ruled by contractional tectonics consequent to the eastward nappe propagation according to the Apennine vergence polarity. A detailed geological survey, carried out along a large portion of southern Apennine thrust‐belt front, running south of the Vulture volcano, allowed the collecting of new data concerning the basinal‐formation mechanisms acting during the sedimentation of Pliocene deposits. From this analysis, it is clear that even if contractional tectonics is the predominant factor controlling the creation or destruction of accommodation space, other mechanisms, as well as wedge uplift‐related extensional tectonics and eustasy, could have also played a significant role in the basin accommodation. In order the considered sector of southern Apennines can provide an useful example about the complex phenomena occurring at mountain belt front where the accommodation space results from a concomitance of eustatic and tectonic factors mainly linked to the accretionary wedge activity.     

Morphotectonic evidence from lateral propagation of an active frontal fold; Pakuashan anticline, foothills of Taiwan

The Pakuashan anticline is uniquely suited for study of the forward and lateral growth of fault-related folds. The Pakuashan ridge development arises from the late Quaternary uplift of the most external thrust zone of the western foothills of Taiwan. From Kaoshiung to Taichung, recent and active westward thrusting occurs at the front of the foothills. The Pakuashan anticline, trending N 150°E in the northern part to N 000° in the southern part, has been active throughout the Quaternary period. This activity is marked by geological structures, tectonic geomorphology and seismicity. A multisource and multiscale approach to study of the continental collision setting has been undertaken to combine tectonics, sedimentology and geomorphology. Studies of fracture patterns allow identification of two main features of stress orientations: a WNW/ESE compression direction, and E–W and N–S extension directions. Quantitative geomorphic parameters have been used to define the morphotectonic evolution and to infer tectonic style along the mountain front. Geomorphic evidence provides significant information on the processes that govern lateral propagation of an active anticline. Quaternary terraces are uplifted, tilted and folded over the Pakuashan ridge. Drainage systems in areas of active compression give information on the thrust zone structures and their development. Steep drainage and high local relief indicate that the Pakuashan anticline forms a well-defined zone of high uplift, especially in the southern part. The two main controls on drainage in that area are rock strength in the hanging wall and propagation of the deformation towards the south.     

RAINFALL AND TEMPERATURE ATTRIBUTES ON THE LESOTHO–DRAKENSBERG ESCARPMENT EDGE, SOUTHERN AFRICA

Located near the southeastern limit of Africa, the Lesotho‐Drakensberg and associated escarpment is the highest range of African mountains south of the massifs in Tanzania. At the escarpment summit and on the adjacent high peaks, the climate is generally interpreted as marginal periglacial yet few data, specifically rainfall and temperature, exist on record at these altitudes. Climatic data from two temporary field stations on the escarpment edge, one of which is the highest rainfall station yet on record in southern Africa, provide contemporary surface‐climate conditions. Mean annual rainfall recorded between 2001 and 2005 averages 767.8 mm at Sani Pass summit (three complete years), and 753.2 mm on Sentinel Peak (two complete years); these values are less than those recorded for the same period in the mountain foothills. Even though rainfall is slightly below long‐term rainfall averages for the area due to a marginally dry spell, the data show that earlier estimates of between 1000 mm and 2000 mm rainfall per annum on the escarpment are too high. A measured mean air temperature of 5.8°C at Sani Pass, however, falls within the range estimated for the escarpment summit. Frost cycles in air and at the soil surface are frequent in winter, but absent in soil for summer, and no long‐duration surface‐soil freeze was measured. Temperatures thus confirm the marginal periglacial nature as postulated for previously, but precipitation data indicate a dryer environment than anticipated. Palaeoenvironmental scenarios, notably arguments for former glaciation based on extrapolations from somewhat exaggerated contemporary precipitation values, thus require re‐consideration.     

River spacing and drainage network growth in widening mountain ranges

Drainage networks in linear mountain ranges always display a particular geometrical organisation whereby the spacing between the major drainage basins is on average equal to half the mountain width (distance from the mountain front to the main drainage divide), independent of climate and tectonics. This relationship is valid for mountains having different widths and is thus usually thought to be maintained by drainage reorganisation during mountain belt widening. However, such large‐scale systematic drainage reorganisation has never been evidenced. In this paper, we suggest an alternative explanation, namely that the observed drainage basin relationships are an inherent property of dendritic river networks and that these relationships are established on the undissected, lowland margins outside mountain ranges and are progressively incorporated and quenched into uplifted topography during range widening. Thus, we suggest that the large‐scale geometry of drainage networks in mountain ranges is mainly antecedent to erosion. We propose a model in which the large‐scale drainage geometry is controlled mainly by the geometrical properties of the undissected surfaces (in particular, the ratio of the regional slope to the local slope related to roughness) over which rivers are flowing before uplift, and is therefore independent of climate and tectonics.     

Detrital record of Mesozoic shortening in the Yanshan belt, NE China: testing structural interpretations with basin analysis

The Yanshan fold‐thrust belt is an exposed portion of a major Mesozoic orogenic system that lies north of Beijing in northeast China. Structures and strata within the Yanshan record a complex history of thrust faulting characterized by multiple deformational events. Initially, Triassic thrusting led to the erosion of a thick sequence of Proterozoic and Palaeozoic sedimentary strata from northern reaches of the thrust belt; Triassic–Lower Jurassic strata that record this episode are deposited in a thin belt south of this zone of erosion. This was followed by postulated Late Jurassic emplacement of a major allochthon (the Chengde thrust plate), which is thought to have overridden structures and strata associated with the Triassic event and is cut by two younger thrusts (the Gubeikou and Chengde County thrusts). The Chengde allochthon is now expressed as a major east–west trending, thrust‐bounded synform (the Chengde synform), which has been interpreted as a folded klippe 20 km wide underlain by a single, north‐vergent thrust fault. Two sedimentary basins, defined on the basis of provenance, geochronology and palaeodispersal trends, developed within the Yanshan belt during Late Jurassic–Early Cretaceous time and are closely associated with the Chengde thrust and allied structures. Shouwangfen basin developed in the footwall of the Gubeikou thrust and records syntectonic unroofing of the hanging wall of that fault. Chengde basin developed in part atop Proterozoic strata interpreted as the upper plate of the Chengde allochthon and records unroofing of the adjacent Chengde County thrust. Both the Chengde County thrust and the Gubeikou thrust are younger than emplacement of the postulated Chengde allochthon, and structurally underlie it, yet neither Shouwangfen basin nor Chengde basin contain a detrital record of the erosion of this overlying structure. In addition, facies, palaeodispersal patterns and geochronology of Upper Jurassic strata that are cut by the Chengde thrust suggest only limited (ca. 5 km) displacement along this fault. We suggest that the units forming the Chengde synform are autochthonous, and that the synform is bounded by two limited‐displacement faults of opposing north and south vergence, rather than a single large north‐directed thrust. This conclusion implies that the Yanshan belt experienced far less Late Jurassic shortening than was previously thought, and has major implications for the Mesozoic evolution of the region. Specifically, we argue that the bulk of shortening and uplift in the Yanshan belt was accomplished during Triassic–Early Jurassic time, and that Late Jurassic structures modified and locally ponded sediments from a well‐developed southward drainage system developed atop this older orogen. Although Upper Jurassic strata are widespread throughout the Yanshan belt, it is clear that these strata developed within several discrete intermontane basins that are not correlable across the belt as a single entity. Thus, the Yanshan has no obvious associated foreland basin, and determining where the Mesozoic erosional products of this orogen ultimately lie is one of the more intriguing unresolved questions surrounding the palaeogeography of North China.     

On the roughness of Mesozoic oceanic crust in the western North Atlantic

Seismic reflection profiles from Mesozoic oceanic crust around the Blake Spur Fracture Zone (BSFZ) in the western North Atlantic have been widely used in constraining tectonic models of slow-spreading mid-ocean ridges. These profiles have anomalously low basement relief compared to crust formed more recently at the Mid-Atlantic Ridge at the same spreading rate. Profiles from other regions of Mesozoic oceanic crust also have greater relief. The anomalous basement relief and slightly increased crustal thickness in the BSFZ survey area may be due to the presence of a mantle thermal anomaly close to the ridge axis at the time of crustal formation. If so, the intracrustal structures observed may be representative of an atypical tectonic regime.     

Drainage on evolving fold-thrust belts: a study of transverse canyons in the Apennines

Anticlinal ridges of the actively deforming Umbria–Marche Apennines fold-thrust belt are transected by deep gorges, accommodating a drainage pattern which almost completely ignores the presence of pronounced anticlinal mountains. Because the region was below sea level until the folds began to form, simple antecedence cannot explain these transverse canyons. In addition, the fold belt is too young for there to have been a flat-lying cover from which the rivers could have been superposed.
In 1978, Mazzanti & Trevisan proposed an explanation for these gorges which deserves wider recognition. They suggested that the Apennine fold ridges emerged from the sea in sequence, with the erosional debris from each ridge piling up against the next incipient ridge to emerge, gradually extending the coastal plain seaward. The new coastal plain adjacent to each incipient anticline provided a flat surface on which a newly elongated river could cross the fold, positioning it to cut a gorge as the fold grew. Their mechanism is thus a combination of antecedence and superposition in which folds, overlying sedimentary cover and downstream elongations of the rivers all form at the same time.
A study of Apennine drainage, using the sequence of older-to-younger transected Apennine folds as a proxy for the historical evolution of drainage cutting through a single fold, shows that transverse drainage forms when sedimentation dominates at the advancing coastline. Longitudinal drainage forms when uplift dominates, the folds first emerge as offshore islands and the Mazzanti–Trevisan mechanism is suppressed.
Complicating factors include several departures from steady-state growth of the fold-thrust belt, a possible case of precursory submarine drainage, early emergence of anticlinal culminations and the location of several transverse canyons at the structurally highest point along anticlinal axes.     

Stratigraphic architecture of Solander Basin records Southern Ocean currents and subduction initiation beneath southwest New Zealand

Solander Basin is characterized by subduction initiation at the Pacific‐Australia plate boundary, where high biological productivity is found at the northern edge of the Antarctic Circumpolar Current. Sedimentary architecture results from tectonic influences on accommodation space, sediment supply and ocean currents (via physiography); and climate influence on ocean currents and biological productivity. We present the first seismic‐stratigraphic analysis of Solander Basin based on high‐fold seismic‐reflection data (voyage MGL1803, SISIE). Solander Trough physiography formed by Eocene rifting, but basinal strata are mostly younger than ca. 17 Ma, when we infer Puysegur Ridge formed and sheltered Solander Basin from bottom currents, and mountain growth onshore increased sediment supply. Initial inversion on the Tauru Fault started at ca. 15 Ma, but reverse faulting from 12 to ca. 8 Ma on both the Tauru and Parara Faults was likely associated with reorganization and formation of the subduction thrust. The new seabed topography forced sediment pathways to become channelized at low points or antecedent gorges. Since 5 Ma, southern Puysegur Ridge and Fiordland mountains spread out towards the east and Solander Anticline grew in response to ongoing subduction and growth of a slab. Solander Basin had high sedimentation rates because (1) it is sheltered from bottom currents by Puysegur Ridge; and (2) it has a mountainous land area that supplies sediment to its northern end. Sedimentary architecture is asymmetric due to the Subtropical Front, which moves pelagic and hemi‐pelagic sediment, including dilute parts of gravity flows, eastward and accretes contourites to the shelf south of Stewart Island. Levees, scours, drifts and ridges of folded sediment characterize western Solander Basin, whereas hemi‐pelagic drape and secondary gravity flows are found east of the meandering axial Solander Channel. The high‐resolution record of climate and tectonics that Solander Basin contains may yield excellent sites for future scientific ocean drilling.     

Reconstructing orogenic exhumation histories using synorogenic detrital zircons and apatites: an example from the Betic Cordillera, SE Spain

Fission track thermogeochronology using detrital apatite and zircon from a synorogenic foreland basin on the northern margin of the Betic Cordillera Internal Zone is used to reconstruct the cooling and unroofing history of the sediment source areas in the Oligo-Miocene mountain belt. Previously, a heavy mineral study on the same sedimentary rocks showed that progressively deeper tectonometamorphic units were being unroofed during the latest Oligocene to middle Miocene at a minimum rate of 3  km Myr⁻¹. The fission track data have further constrained the exhumation history showing that the structurally highest (i.e. shallowest) parts of the mountain belt (Malaguide Complex) cooled relatively slowly during the latest Oligocene–Aquitanian, while the deeper metamorphic units (Alpujarride Complex) cooled at much higher rates (up to 300 °C Myr⁻¹) during the Burdigalian–Langhian. These fast cooling rates from synorogenic detritus are consistent with cooling rates calculated previously for the deeper parts of the early Miocene orogenic belt, using ³⁹Ar–⁴⁰Ar dating of muscovite, biotite and amphibole from basement metamorphic rocks. Rapid cooling in the early Miocene, which commenced at ≈21  Ma, is attributed to the change in process from erosional to tectonic denudation by orogen-scale extension within the eastern Betic Cordillera.

     

Cooling of the Sverdrup Basin during Tertiary basin inversion: implications for hydrocarbon exploration

ABSTRACT The regional thermal history of the north‐eastern Sverdrup Basin, Canadian Arctic Archipelago, has been assessed using apatite fission‐track thermochronology and vitrinite reflectance data. Fission‐track data for 27 samples from six wells through the Mesozoic section on Axel Heiberg and Ellesmere Islands reveal significant Palaeocene cooling associated with basin inversion during the Eurekan Orogeny. Fission‐track data for 29 outcrop samples, ranging in stratigraphic age from Cambrian to Tertiary, also reveal significant Palaeocene cooling. Vitrinite reflectance data from carbonaceous shales and coal seams in well and outcrop samples are consistent with these conclusions. The degree of Palaeocene cooling observed is greatest for well and outcrop samples in the cores of anticlines or the hanging walls of thrust faults, such as the Fosheim anticline, and faults, such as the Lake Hazen fault system, and the East Cape and Vesle Fiord thrust faults. Palaeocene cooling is largely attributed to the denudation of structures during the Eurekan Orogeny. At one locality on north‐western Ellesmere Island, which is on the northern flank of the Sverdrup Basin, the underlying Franklinian basement rocks yield Early Cretaceous fission track ages with relatively long mean track lengths. This indicates that this part of the basin was uplifted at this time and that subsequent sedimentation and subsidence in the Cretaceous and early Tertiary were modest. This locality thus appears to be on the rift shoulder, which developed along the flank of the Amerasia Basin in the Lower Cretaceous. At a locality on western Axel Heiberg Island, which is downflank from the rift shoulder, the Upper Jurassic Awingak sandstone has a Late Cretaceous fission track age. This is best explained by heating above the total annealing temperature for fission‐tracks in apatite by extensive Lower Cretaceous intrusions and subsequent heat dissipation and cooling in the Late Cretaceous followed by further substantial cooling due to Tertiary denudation. These results indicate that maximum burial temperatures occurred in the presently exposed Mesozoic section prior to basin inversion during the Eurekan Orogeny. It can therefore be inferred that peak hydrocarbon generation and primary migration predated the formation of structural traps during the Tertiary at shallow depths within the northern Sverdrup Basin.     

河北省中南部农田孢粉组合特征

河北省中南部82 个农田表土花粉组合研究表明：农田花粉组合不仅有农作物花粉类型,也有临近山区的植物成分。山区农田乔木花粉含量与浓度高于平原,对平原的影响随距离增加而降低,距太行山0～50 km 松属花粉含量为20%～30%,50～100 km 为10%～20%,100～150 km 增至20%～30%,海滨区降至16%以下,平原中部含量增加可能与焚风效应有关;山区至平原乔木花粉含量空间上的变化,可能类似于历史时期人类活动介入森林区后时间上的变化。山区和平原灌木花粉含量较低,但主要成分不同,山区以胡颓子科、榛属、虎榛子较常见,平原区蔷薇科、葡萄科花粉相对较多。平原区草本花粉含量高出山区,其中藜科花粉由山区向平原逐渐增高,可能反映人类活动不断增强的特征。山区中华卷柏含量高于平原,但平原区高达7%。中华卷柏不易被风搬运,推测平原区农田的中华卷柏可能是平原沉积时由河流从山区搬运而来。相同类型农业单元乔木、灌木花粉和蕨类百分比山区一般高于平原,草本低于平原;不同类型农业单元乔木、草本百分比平原区相近,山区差异较大。山区乔木花粉含量差异主要受草本类型影响,平原区草本花粉组合差异主要是农作物花粉(人工禾本科、十字花科) 含量的差异;不同农业单元孢粉浓度差异主要为草本花粉浓度不同。     

Time lag of syntectonic sedimentation across an alluvial basin: theory and example from the Ebro Basin, Spain

We propose and test a conceptual framework for evaluating the relative timing of different types of sedimentary indicators of tectonism in alluvial foreland basin settings. We take the first occurrence of a detrital grain from a newly exposed source‐area lithology to provide the best indicator of the onset of tectonic uplift in the source area. Source‐area unroofing may lag behind initial uplift because of the type, thickness and structure of rocks in the uplifted mountain block, drainage patterns and climate. However, once exposed, advective transport disperses grains quickly throughout fluvial systems. Because of increased subsidence rate from thrust belt loading, an increase in sedimentation rate begins coincident with tectonic load emplacement within the flexural half‐width of the basin. However, farther out into the basin increased sedimentation rates lag behind the composition signal because of time lags associated with propagation of the thrust load and attendant sediment loads into the basin. The progradation of syntectonic gravel lags behind all of these signals as a direct function of the relative proportion of gravel fraction within transported sediment and rates and geometry of subsidence, which selectively traps the coarsest grain‐size fractions in the most proximal parts of the basin. We demonstrate this signal attenuation in the syntectonic Horta–Gandesa alluvial system (late Eocene–Oligocene), exposed along the southeast margin of the Ebro Basin, Spain. The results demonstrate that: (1) the time spans between the compositional signal and the progradation of the gravel front can be geologically significant, on the order of more than a million years within as little as 20 km of the thrust front; and (2) time lags between the signals increase with distance away from the deformation front. No lag time was observed between the first appearance of a new clast composition and the arrival of gravel front when the thrust front was within a few tens of metres from the depositional site. In contrast, the time lag was 0.5–1 Myr when the thrust front was about 5–6 km away and it increased to >1 Myr when the deformation front was about 8 km away. At the most extreme position, when the thrust front was 15–20 km away, the gravel front never reached the study area.     

Detailed mapping of marine erosional surfaces and the geometry of clinoforms on seismic data: a tool to identify the thickest reservoir sand

Deltaic sediments of the Billund and Bastrup sands were deposited in a ramp setting in the storm-dominated North Sea during the early Miocene. A marked relief in the hinterland and the relatively high precipitation resulted in a high sediment supply to the sea and progradation of major delta-coastal plains south of the present-day Norway. The focus of this study is on the forced regressive wedge system tracts of the two delta complexes, which show remarkably well-developed marine erosional surfaces associated with sand-rich packages characterised by steeply dipping clinoforms (up to 10°). The well-developed clinoformal packages indicate that deposition occurred in water depths of 60–100 m even under a sea-level fall. The sand-rich delta lobes also demonstrate that it was a high-energy environment and that wave-generated re-suspension at the delta front effectively re-sorted the sediments and sand-rich systems became separated from mud-dominated portions of the delta complexes. The evolution of the above occurred in a basin that has been exposed by inversion tectonism. The sediment supply was consequently high. During deposition, eustatic sea-level changes strongly controlled the evolution of sequences. The results found in this study may be applicable for mapping reservoir sands in ramp settings and in rift basins especially when looking for reservoir rocks in the basinal setting or when carrying out detailed reservoir mapping in already existing hydrocarbon fields.     

Integrating soils and geomorphology in mountains—an example from the Front Range of Colorado

Soil distribution in high mountains reflects the impact of several soil-forming factors. Soil geomorphologists use key pedological properties to estimate ages of Quaternary deposits of various depositional environments, estimate long-term stability and instability of landscapes, and make inferences on past climatic change. Once the influence of the soil-forming factors is known, soils can be used to help interpret some aspects of landscape evolution that otherwise might go undetected.The Front Range of Colorado rises from the plains of the Colorado Piedmont at about 1700 m past a widespread, dissected Tertiary erosion surface between 2300 and 2800 m up to an alpine Continental Divide at 3600 to over 4000 m. Pleistocene valley glaciers reached the western edge of the erosion surface. Parent rocks are broadly uniform (granitic and gneissic). Climate varies from 46 cm mean annual precipitation (MAP) and 11 °C mean annual temperature (MAT) in the plains to 102 cm and −4 °C, respectively, near the range crest. Vegetation follows climate with grassland in the plains, forest in the mountains, and tundra above 3450 m. Soils reflect the bioclimatic transect from plains to divide: A/Bw or Bt/Bk or K (grassland) to A/E/Bw or Bt/C (forest) to A/Bw/C (tundra). Corresponding soil pH values decrease from 8 to less than 5 with increasing elevation. The pedogenic clay minerals dominant in each major vegetation zone are: smectite (grassland), vermiculite (forest), and 1.0–1.8 nm mixed-layer clays (tundra). Within the lower forested zone, the topographic factor (aspect) results in more leached, colder soils, with relatively thin O horizons, well-expressed E horizons and Bt horizons (Alfisols) on N-facing slopes, whereas soils with thicker A horizons, less developed or no E horizons, and Bw or Bt horizons (Mollisols) are more common on S-facing slopes. The topographic factor in the tundra results in soil patterns as a consequence of wind-redistributed snow and the amount of time it lingers on the landscape. An important parent material factor is airborne dust, which results in fine-grained surface horizons and, if infiltrated, contributes to clay accumulation in some Bt horizons. The time factor is evaluated by soil chronosequence studies of Quaternary deposits in tundra, upper forest, and plains grassland. Few soils in the study area are >10,000 years old in the tundra, >100,000 years old in the forest, and >2 million years old in the grassland. Stages of granite weathering vary with distance from the Continental Divide and the best developed is grus near the sedimentary/granitic rock contact just west of the mountain front. Grus takes a minimum of 100,000 years to form.Some of the relations indicated by the soil map patterns are: (1) parts of the erosion surface have been stable for 100,000 years or more; (2) development of grus near the mountain front could be due in part to pre-Pennsylvanian weathering; (3) a few soil properties reflect Quaternary paleoclimate; and (4) a correlation between soil development in the canyons and stream incision rates.     

The stratigraphic and structural evolution of the Dzereg Basin, western Mongolia: clastic sedimentation, transpressional faulting and basin destruction in an intraplate, intracontinental setting

The Dzereg Basin is an actively evolving intracontinental basin in the Altai region of western Mongolia. The basin is sandwiched between two transpressional ranges, which occur at the termination zones of two regional‐scale dextral strike‐slip fault systems. The basin contains distinct Upper Mesozoic and Cenozoic stratigraphic sequences that are separated by an angular unconformity, which represents a regionally correlative peneplanation surface. Mesozoic strata are characterized by northwest and south–southeast‐derived thick clast‐supported conglomerates (Jurassic) overlain by fine‐grained lacustrine and alluvial deposits containing few fluvial channels (Cretaceous). Cenozoic deposits consist of dominantly alluvial fan and fluvial sediments shed from adjacent mountain ranges during the Oligocene–Holocene. The basin is still receiving sediment today, but is actively deforming and closing. Outwardly propagating thrust faults bound the ranges, whereas within the basin, active folding and thrusting occurs within two marginal deforming belts. Consequently, active fan deposition has shifted towards the basin centre with time, and previously deposited sediment has been uplifted, eroded and redeposited, leading to complex facies architecture. The geometry of folds and faults within the basin and the distribution of Mesozoic sediments suggest that the basin formed as a series of extensional half‐grabens in the Jurassic–Cretaceous which have been transpressionally reactivated by normal fault inversion in the Tertiary. Other clastic basins in the region may therefore also be inherited Mesozoic depocentres. The Dzereg Basin is a world class laboratory for studying competing processes of uplift, deformation, erosion, sedimentation and depocentre migration in an actively forming intracontinental transpressional basin.