桥墩-梁体系横向半主动变阻尼控制研究

针对桥梁横桥向抗震条件相对较差的情况,提出利用变阻尼控制装置对典型桥梁结构横向振动进行控制的方法,探讨其基于LQR算法的半主动控制效果.将被控结构作为多自由度体系,建立了结构-变阻尼系统力学模型和运动微分方程,进而结合实例利用 Matlab软件仿真分析了各种半主动控制算法和被动控制策略的控制效果.研究结果表明:采用半主动变阻尼控制装置有效的降低了桥梁结构横向地震反应,控制效果明显.     

相邻结构的高效阻尼控制

提出了相邻结构高效阻尼控制的概念,并基于双液缸的放大原理提出了一处相应的装置,该装置通过放大相邻结构间的振动差别,使阻尼器具有更大的变形和速度,从而更高效地工作,文章阐明了该装置的工作原理,建立了两相邻结构高效阻尼控制体系的运动方程,并对此进行了计算机仿真分析,结果表明,高效阻尼控制的概念是正常的,本文提出的控制装置是有效的,可取得远优于普通阻尼控制的效果。     

多阶梯被动变阻尼装置高层建筑风振控制性能化设计方法

多阶梯被动变阻尼装置(multi-stage passive variable damping device, MPVDD)能够随外部激励速度变化机械式实时改变阻尼系数,同时不需要外部能量供给和反馈控制,与粘滞阻尼器相比,MPVDD耗能效果明显。在不同阶数MPVDD控制下的高层结构响应控制效果分析表明,多阶梯被动变阻尼装置出力范围大,可用于风振控制。根据风振分析结果提出了针对多阶梯被动变阻尼装置的风振控制性能水准和性能指标,以及多阶梯被动变阻尼装置高层建筑风振控制性能化设方方法,该设计方法可以对不同重现期的风荷载激励下的结构响应针对性设计,最后通过工程实例设计给出了完整的设计过程,从而证明了该方法对高层建筑风振控制的有效性和可行性。     

多结构混合控制体系研究

本文提出了多结构混合控制体系的概念及其相应的混合控制装置－常阻尼变刚度控制装置,阐明了其控制原理,建立了两结构混合控制体系的状态方程,其于瞬时最优控制的概念,提出了多结构混合控制体系的控制律,某两结构混合控制体系的仿真分析表明,多结构混合控制体系的概念是正确的,相应的混合控制装置是有效的。     

多自由度结构的磁流变阻尼顶层隔振控制

提出了应用磁流变阻尼装置的多自由度结构顶层隔振控制方法.首先,以大质量比TMD控制的减振机理为基础,对顶层隔振结构的动力特性进行研究,建立合理的顶层隔振结构体系;然后,采用磁流变阻尼器对顶层隔振结构的隔振层进行被动和半主动控制,以避免其控制范围较窄的缺点;最后,对三自由度结构进行顶层隔振控制时程分析,得到了比较理想的控制效果.     

新型主动变刚度阻尼器的滑动模态控制及仿真分析

设计出一种新型主动变刚度阻尼装置,该装置可向受控结构提供两种等效刚度,使受控结构能主动地避开地震动卓越频率而永远处于非共振的状态。基于变结构控制理论的滑动模态控制算法,推导了该新型阻尼器的两种开关控制律。仿真分析结果表明,这种新型主动变刚度阻尼器的减震效果是非常明显的,可取得明显优于被动控制的减震效果。两种控制律中,连续型滑动模态控制律可以更充分地发挥该新型阻尼器的性能,取得更好的控制效果。     

地震作用下大跨度连续梁桥半主动变阻尼控制研究

利用半主动变阻尼控制装置开展连续梁桥结构在纵向地震波作用下的振动控制研究,通过建立桥梁结构-半主动变阻尼系统力学模型和运动微分方程,进行不同地震波激励下,连续梁桥关键部位在无控?半主动变阻尼控制和主动控制下的响应值分析计算,其中最优控制力采用LQR算法确定,半主动变阻尼控制采用限界Hrovat最优控制算法。计算结果表明:半主动变阻尼控制与主动控制的控制效果接近,两者均起到了良好的减震作用,而其中半主动变阻尼控制所需能量少?设施经济可靠,是一种良好的结构减震控制方法。     

主动变刚度阻尼多振型半主动控制研究

探讨了开关型半主动控制算法的研究现状,基于单步状态预测控制律,提出了针对高层建筑多自由度结构体系AVS/D(主动变刚度阻尼)多振型开关控制律。通过算例仿真分析与其它开关控制律作了比较,结果表明这种开关控制律是可行的、有效的。特别是在多自由度结构体系振动过程中有多个振型同时在受控结构的反应中起主要作用时,本文提出的开关控制律比其它振型开关控制律有更好的控制效果。     

两个控制装置的模拟地震振动台试验研究

本文作者设计制造了一种高效被动阻尼控制（HEDC）装置和一种半主动控制装置－主动变刚度,阻尼（AVS．D）控制装置,并对其控制机理和控制效果进行了模拟地震振动台试验研究,试验结果表明,HEDC控制效果是令人满意的,而AVS．D控制则可以获得更好的效果,尽管它仅需很少的能量输入,试验结果表明,在AVS．D控制中,装置的电磁阀处于开启状态工作的时间较长,即在大部分时间里AVS．D控制系统是通过阻尼而不足刚度来控制受控结构,这在一定程度上降低了控制时滞的影响。     

悬挂阻尼控制结构体系巨型框架地震响应分析

提出一种巨型悬挂阻尼控制结构体系，采用结构动力学有限元方法对结构体系进行了地震随机振动分析、时程分析和地震反应谱分析，分析结果表明，这种结构体系能有效地减小结构的地震响应。最后讨论了影响控制效果的参数。     

变阻尼半主动结构控制振动台试验

在一个１：４的五层模型刚架结构上进行了变阻尼半主动结构控制振动台试验．在结构的底层安装了一个溢流阀式变阻尼控制器,输入几种不同的地震动并采用几种不同的控制算法对结构进行了变阻尼半主动控制。振动台试验结果表明,受阻尼半主动结构控制仅需要很少的电能,就可以达到较好的控制效果,是一种很有应用前景的结构振动控制方案。结合溢流阀式变阻尼控制器的特点,分析了一些因素对控制效果的影响．     

Fuzzy logic control of bridge structures using intelligent semi-active seismic isolation systems

Passive supplemental damping in a seismically isolated structure provides the necessary energy dissipation to limit the isolation system displacement. However, damper forces can become quite large as the passive damping level is increased, resulting in the requirement to transfer large forces at the damper connections to the structure which may be particularly difficult to accommodate in retrofit applications. One method to limit the level of damping force while simultaneously controlling the isolation system displacement is to utilize an intelligent hybrid isolation system containing semi-active dampers in which the damping coeffic ient can be modulated. The effectiveness of such a hybrid seismic isolation system for earthquake hazard mitigation is investigated in this paper. The system is examined through an analytical and computational study of the seismic response of a bridge structure containing a hybrid isolation system consisting of elastomeric bearings and semi-active dampers. Control algorithms for operation of the semi-active dampers are developed based on fuzzy logic control theory. Practical limits on the response of the isolation system are considered and utilized in the evaluation of the control algorithms. The results of the study show that both passive and semi-active hybrid seismic isolation systems consisting of combined base isolation bearings and supplemental energy dissipation devices can be beneficial in reducing the seismic response of structures. These hybrid systems may prevent or significantly reduce structural damage during a seismic event. Furthermore, it is shown that intelligent semi-active seismic isolation systems are capable of controlling the peak deck displacement of bridges, and thus reducing the required length of expansion joints, while simultaneously limiting peak damper forces. Copyright © 1999 John Wiley & Sons, Ltd.     

近断层地震动作用下桥梁结构的组合隔震分析

为改善近断层地震动作用下隔震桥梁结构的抗震性能,基于Benchmark结构振动控制问题,研究附加黏滞阻尼器、磁流变(MR)阻尼器的组合隔震策略.非线性动力分析过程中,优化了黏滞阻尼器的阻尼系数和速度指数,并设计了分散模糊控制器来确定施加给磁流变阻尼器的电压.研究结果表明:采用黏滞阻尼器和磁流变阻尼器可提高隔震桥梁结构在...     

调谐惯容系统的混合隔震体系一致性优化设计

基础隔震技术广泛应用于建筑结构以减轻结构的地震响应.值得注意的是,在隔震体系中减小主结构的加速度响应是以牺牲隔震器变形为代价的.调谐惯容系统(TID)和隔震器组成的混合隔震体系可减小隔震层的位移响应.与传统调谐质量阻尼器(TMD)结构类似,TID 由惯容、调谐弹簧和阻尼元件组成.因此,可直接利用 TMD减震系统的设计公式来确定 TID 的最优参数.首先基于单自由度体系(SDOF)附加 TID的运动方程,推导分析两种 TID和 TMD设计公式,对两者设计公式的前提条件和适用性进行深入的探讨.其后,借助基础隔震体系的benchmark模型来检验设计 TID的可行性和有效性.数值模拟结果表明,在不增加主结构绝对加速度响应的情况下, TID能够显著减小基础隔震结构的位移响应和基底剪力.     

基于颗粒阻尼器的多鼓型古柱抗震性能研究

为保护地震作用下历史遗迹帕特农神庙多鼓石柱,提出将破损的石鼓替换为填充颗粒的空鼓,以减轻多鼓石柱动力响应。本文基于PFC3D与FLAC3D软件,实现了离散-有限耦合作用,模拟了附有颗粒阻尼器帕特农神庙多鼓型石柱,研究了颗粒阻尼器对帕特农神庙石柱的减震效果,并分析地震强度、频率、阻尼器位置等因素对减震效果的影响。研究结果表明,将颗粒阻尼器替换破损的空鼓,PFC3D与FLAC3D耦合计算结果与试验结果基本一致,减震效果显著,说明耦合分析方法研究颗粒阻尼器抗震性能具有较高的可靠性;地震强度不同时,分层颗粒阻尼器仍可较好地耗散能量;颗粒阻尼器对结构的减震性能受激励频率的影响显著,频率越高,减震效果越好;颗粒阻尼器布置在古柱中上部减震效果优于布置在古柱下部。     

Adaptive base-isolation of civil structures using variable amplification

Semi-active dampers are used in base-isolation to reduce the seismic response of civil engineering structures. In the present study, a new semi-active damping system using variable amplification will be investigated for adaptive baseisolation. It uses a novel variable amplification device （VAD） connected in series with a passive damper. The VAD is capable of producing multiple amplification factors, each corresponding to a different amplification state. Forces from the damper are amplified to the structure according to the current amplification state, which is selected via a semi-active control algorithm specifically tailored to the system＇s tmique damping characteristics. To demonstrate the effectiveness of the VAD-damper system for adaptive base-isolation, numerical simulations are conducted for three and seven-story base-isolated buildings subject to both far and near-field ground motions. The results indicate that the system can achieve significant reductions in response compared to the base-isolated buildings with no damper. The proposed system is also found to perform well compared to a typical semi-active damper.     

Earthquake response of elastic SDF systems with non‐linear fluid viscous dampers

The steady‐forced and earthquake responses of SDF systems with a non‐linear fluid viscous damper (FVD) are investigated. The energy dissipation capacity of the FVD is characterized by the supplemental damping ratio ζsd and its non‐linearity by a parameter designated α. It is found that the structural response is most effectively investigated in terms of ζ_sd and α because (1) these two parameters are dimensionless and independent, and (2) the structural response varies linearly with the excitation intensity. Damper non‐linearity has essentially no influence on the peak response of systems in the velocity‐sensitive spectral region, but differences up to 14% were observed in the other spectral regions. The structural deformation is reduced by up to 25% when ζ_sd= 5%; and by up to 60% when ζ_sd= 30%. Non‐linear FVDs are advantageous because they achieve essentially the same reduction in system responses but with a significantly reduced damper force. For practical applications, a procedure is presented to estimate the design values of structural deformation and forces for a system with non‐linear FVD directly from the design spectrum. It is demonstrated that the earthquake‐induced force in a non‐linear FVD can be estimated from the damper force in a corresponding system with linear FVD, its peak deformation, and peak relative velocity; however, the relative velocity should not be approximated by the pseudo‐velocity as this approximation introduces a large error in the damper force. Finally, a procedure is presented to determine the non‐linear damper properties necessary to limit the structural deformation to some design value or the structural capacity for a given design spectrum. Copyright © 2002 John Wiley & Sons, Ltd.     

Multi‐objective optimal design of FLC driven hybrid mass damper for seismically excited structures

Structural vibration control using active or passive control strategy is a viable technology for enhancing structural functionality and safety against natural hazards such as strong earthquakes and high wind gusts. Both the active and passive control systems have their limitations. The passive control system has limited capability to control the structural response whereas the active control system depends on external power. The power requirement for active control of civil engineering structures is usually quite high. Thus, a hybrid control system is a viable solution to alleviate some of the limitations. In this paper a multi‐objective optimal design of a hybrid control system for seismically excited building structures has been proposed. A tuned mass damper (TMD) and an active mass driver (AMD) have been used as the passive and active control components of the hybrid control system, respectively. A fuzzy logic controller (FLC) has been used to drive the AMD as the FLC has inherent robustness and ability to handle the non‐linearities and uncertainties. The genetic algorithm has been used for the optimization of the control system. Peak acceleration and displacement responses non‐dimensionalized with respect to the uncontrolled peak acceleration and displacement responses, respectively, have been used as the two objectives of the multi‐objective optimization problem. The proposed design approach for an optimum hybrid mass damper (HMD) system, driven by FLC has been demonstrated with the help of a numerical example. It is shown that the optimum values of the design parameters of the hybrid control system can be determined without specifying the modes to be controlled. The proposed FLC driven HMD has been found to be very effective for vibration control of seismically excited buildings in comparison with the available results for the same example structure but with a different optimal absorber. Copyright © 2002 John Wiley & Sons, Ltd.