Partitioning of convergence in Northwest Sub-Himalaya: estimation of late Quaternary uplift and convergence rates across the Kangra reentrant,North India

The Kangra reentrant constitutes a ~ 80-km-wide zone of fold-thrust belt made of Cenozoic strata of the foreland basin in NW Sub-Himalaya. Earlier workers estimated the total long-term shortening rate of 14 ± 2 mm/year by balanced cross-section between the Main Boundary Thrust and the Himalayan Frontal Thrust. Geologically estimated rate is nearly consistent with the GPS-derived slip rate of 14 ± 1 mm/year. There are active faults developed within 4–8 km depth of the Sub-Himalayan fold-thrust belt of the reentrant. Dating the strath surfaces of the abandoned fluvial terraces and fans above the thrust faults, the uplift (bedrock incision) rates are computed. The dips of thrust faults are measured in field and from available seismic (depth) profiles. From the acquired data, late Quaternary shortening rates on the Jawalamukhi Thrust (JT), the Soan Thrust (ST) and the Himalayan Frontal Thrust (HFT) are estimated. The shortening rates on the JT are 3.5–4.2 mm/year over a period 32–30 ka. The ST yields a shortening rate of 3.0 mm/year for 29 ka. The corresponding shortening and slip rates estimated on the HFT are 6.0 and 6.9 mm/year during a period 42 ka. On the back thrust of Janauri Anticline, the shortening and slip rates are 2.0 and 2.2 mm/year, respectively, for the same period. The results constrained the shortening to be distributed largely across a 50-km-wide zone between the JT and the HFT. The emergence of surface rupture of a great and mega earthquakes recorded on the reactivated HFT implies ≥100 km width of the rupture. The ruptures of large earthquakes, like the 1905 Kangra and 2005 Kashmir, remained restricted to the hinterland. The present study indicates that the high magnitude earthquakes can occur between the locking line and the active thrusts.     

Active tectonics of Himalayan Frontal Fault system

In the Sub-Himalayan zone, the frontal Siwalik range abuts against the alluvial plain with an abrupt physiographic break along the Himalayan Frontal Thrust (HFT), defining the present-day tectonic boundary between the Indian plate and the Himalayan orogenic prism. The frontal Siwalik range is characterized by large active anticline structures, which were developed as fault propagation and fault-bend folds in the hanging wall of the HFT. Fault scarps showing surface ruptures and offsets observed in excavated trenches indicate that the HFT is active. South of the HFT, the piedmont zone shows incipient growth of structures, drainage modification, and 2–3 geomorphic depositional surfaces. In the hinterland between the HFT and the MBT, reactivation and out-of-sequence faulting displace Late Quaternary–Holocene sediments. Geodetic measurements across the Himalaya indicate a ~100-km-wide zone, underlain by the Main Himalayan Thrust (MHT), between the HFT and the main microseismicity belt to north is locked. The bulk of shortening, 15–20 mm/year, is consumed aseismically at mid-crustal depth through ductile by creep. Assuming the wedge model, reactivation of the hinterland faults may represent deformation prior to wedge attaining critical taper. The earthquake surface ruptures, ≥240 km in length, interpreted on the Himalayan mountain front through paleoseismology imply reactivation of the HFT and may suggest foreland propagation of the thrust belt.     

Geomorphic and structural evidences of neotectonic activity in the Sub-Himalayan belt of Nahan Salient,NW India

Neotectonism in the Sub-Himalayan belt is not new. Moreover, the word ‘Sub-Himalaya’ is almost synonymous with ‘neotectonic activity’. In the present paper, we report some of the most convincing geomorphic and structural evidences of neotectonic activity from the Sub-Himalayan belt in the Nahan Salient. The geomorphic evidences mainly include the four geomorphic surfaces identified from the transverse topographic profiles drawn parallel to the Himalayan front. These surfaces are commonly covered with terrace deposits that are tilted as well as faulted at a number of places. A number of faults, directly observable in the field, are normal in nature and they are oriented at high angles to the Himalayan Frontal Thrust (HFT). These faults are similar to the E-W extension in southern Tibet in response to the oblique convergence of India at ∼N20°E in the NW Himalaya. They are attributable to the kinematics of neotectonic compression along the HFT, the frontal ramp-oblique ramp-frontal ramp geometry of the thrust fault and related adjustments.     

Active tectonic influence on the evolution of drainage and landscape: Geomorphic signatures from frontal and hinterland areas along the Northwestern Himalaya, India

The Kangra Re-entrant in the NW Himalaya is one of the most seismically active regions, falling into Seismic Zone V along the Himalaya. In 1905 the area experienced one of the great Himalayan earthquakes with magnitude 7.8. The frontal fault system – the Himalayan Frontal Thrust (HFT) associated with the foreland fold – Janauri Anticline, along with other major as well as secondary hinterland thrust faults, provides an ideal site to study the ongoing tectonic activity which has influenced the evolution of drainage and landscape in the region. The present study suggests that the flat-uplifted surface in the central portion of the Janauri Anticline represents the paleo-exit of the Sutlej River. It is suggested that initially when the tectonic activity propagated southward along the HFT the Janauri Anticline grew along two separate fault segments (north and south faults), the gap between these two fault and the related folds allowed the Sutlej River to flow across this area. Later, the radial propagation of the faults towards each other resulted in an interaction of the fault tips, which caused the rapid uplift of the area. Rapid uplift resulted in the disruption and longitudinal deflection of the Sutlej river channel. Fluvial deposits on the flat surface suggest that an earlier fluvial system flowed across this area in the recent past. Geomorphic signatures, like the sharp mountain fronts along the HFT in some places, as well as along various hinterland subordinate faults like the Nalagarh Thrust (NaT), the Barsar Thrust (BaT) and the Jawalamukhi Thrust (JMT); the change in the channel pattern, marked by a tight incised meander of the Beas channel upstream of the JMT indicate active tectonic movements in the area. The prominent V-shaped valleys of the Beas and Sutlej rivers, flowing across the thrust fronts, with Vf values ranging from <1.0–1.5 are also suggestive of ongoing tectonic activity along major and hinterland faults. This suggests that not only is the HFT system active, but also the other major and secondary hinterland faults, viz. the MBT, MCT, SnT, NaT, BaT, and the JMT can be shown to have undergone recent tectonic displacement.     

THRUST PACKAGES OF 1.68 Ga INDIAN SUPRA-CRUSTAL ROCKS IN THE MIOCENE SIWALIK BELT,CENTRAL NEPAL HIMALAYAS

THRUST PACKAGES OF 1.68 Ga INDIAN SUPRA-CRUSTAL ROCKS IN THE MIOCENE SIWALIK BELT,CENTRAL NEPAL HIMALAYAS     

A review of the seismicity and seismotectonics of Delhi and adjoining areas

Understanding of seismicity and seismotectonics of Delhi and adjoining areas is essential as these areas lie in the seismic zone IV and are geologically confined to the Delhi Fold Belt (DFB), juxtaposed to the Himalayan Frontal Thrust Fold Belt. Owing to the set-up, seismicity in this area is ascribed to the Himalayan Thrust System and activation of DFB Fault Systems. Considerably improved instrumental seismic monitoring in this area and data analysis had resolved three regions of pronounced seismicity that lie close to Sonepat, Rohtak and western part of the NCT Delhi, attributed to activation of various portions of the fault systems of the DFB. Based on seismic telemetry network data, the seismicity pattern analysis revealed that the Mahendragarh Dehradun Sub-Surface Fault (MDSSF) and Delhi Sargodha Ridge (DSR) are the two major zones of structural importance for the nucleation of seismicity in this region. These revelations were corroborated with the fault plane solution of the earthquakes. The dominant mechanism in nucleation of seismicity in DFB is the thrust with minor strike slip. The seismicity and seismotectonics of Delhi and adjoining areas endemic to activation of DFB is reviewed and presented in this paper.     

断层相关褶皱在塔里木盆地玛东地区的应用

玛东褶皱-冲断带是世界上保存最好的早古生代褶皱冲断带之一,也是塔里木油气勘探的重点区域之一。褶皱-冲 断带浅部构造由于遭受强烈剥蚀,为玛东褶皱-冲断带的构造样式和变形机制研究带来巨大的挑战。断层相关褶皱理论定 量化建立了断层形态和褶皱形态几何学和运动学的关系,是一种有效的利用断层形态来推测褶皱形态的方法,为恢复玛东 地区被剥蚀区域的构造形态提供了可能。文中详细介绍了断层转折褶皱和断层传播褶皱的几何学和运动学特征,并将其应 用于玛东地区的典型构造中,建立2 种玛东地区构造变形模式。最后结合工业地震剖面和钻井资料,认为玛东地区的主要 构造样式是断层转折褶皱, 并分析了构造样式对油气圈闭的影响。     

Landforms along transverse faults parallel to axial zone of folded mountain front,north-eastern Kumaun Sub-Himalaya,India

The shape of the frontal part of the Himalaya around the north-eastern corner of the Kumaun Sub-Himalaya, along the Kali River valley, is defined by folded hanging wall rocks of the Himalayan Frontal Thrust (HFT). Two parallel faults (Kalaunia and Tanakpur faults) trace along the axial zone of the folded HFT. Between these faults, the hinge zone of this transverse fold is relatively straight and along these faults, the beds abruptly change their attitudes and their widths are tectonically attenuated across two hinge lines of fold. The area is constituted of various surfaces of coalescing fans and terraces. Fans comprise predominantly of sandstone clasts laid down by the steep-gradient streams originating from the Siwalik range. The alluvial fans are characterised by compound and superimposed fans with high relief, which are generated by the tectonic activities associated with the thrusting along the HFT. The truncated fan along the HFT has formed a 100 m high-escarpment running E–W for ～5 km. Quaternary terrace deposits suggest two phases of tectonic uplift in the basal part of the hanging wall block of the HFT dipping towards the north. The first phase is represented by tilting of the terrace sediments by ～30 ^° towards the NW; while the second phase is evident from deformed structures in the terrace deposit comprising mainly of reverse faults, fault propagation folds, convolute laminations, flower structures and back thrust faults. The second phase produced ～1.0 m offset of stratification of the terrace along a thrust fault. Tectonic escarpments are recognised across the splay thrust near south of the HFT trace. The south facing hill slopes exhibit numerous landslides along active channels incising the hanging wall rocks of the HFT. The study area shows weak seismicity. The major Moradabad Fault crosses near the study area. This transverse fault may have suppressed the seismicity in the Tanakpur area, and the movement along the Moradabad and Kasganj–Tanakpur faults cause the neotectonic activities as observed. The role of transverse fault tectonics in the formation of the curvature cannot be ruled out.     

Displacement transfer from fault-bend to fault-propagation fold geometry: An example from the Himalayan thrust front

The leading edge of the ENE-trending Himalayan thrust front in Pakistan exhibits along-strike changes in deformational style, ranging from fault-bend to fault-propagation folds. Although the structural geometry is very gently deformed throughout the Salt Range, it becomes progressively more complex to the east as the leading edge of the emergent Salt Range Thrust becomes blind. Surface geology, seismic reflection, petroleum well, and chronostratigraphic data are synthesized to produce a 3-D kinematic model that reconciles the contrasting structural geometries along this part of the Himalayan thrust front. We propose a model whereby displacement was transferred, across a newly-identified lateral ramp, from a fault-bend fold in the west to fault-propagation folds in the east and comparable shortening was synchronously accommodated by two fundamentally different mechanisms: translation vs. telescoping. However, substantially different shortening distribution patterns within these structurally contrasting segments require a tear fault, which later is reactivated as a thrust fault. The present geometry of this S-shaped displacement transfer zone is a combined result of the NW–SE compression of the lateral culmination wall and associated tear fault, and their subsequent modification due to mobilization of underlying ductile salt.     

Geodynamics of NW India: Subduction, lithospheric flexure, ridges and seismicity

Spectral analysis of digital data of the Bouguer anomaly map of NW India suggests maximum depth of causative sources as 134 km that represents the regional field and coincides with the upwarped lithosphere — asthenosphere boundary as inferred from seismic tomography. This upwarping of the Indian plate in this section is related to the lithospheric flexure due to its down thrusting along the Himalayan front. The other causative layers are located at depths of 33, 17, and 6 km indicating depth to the sources along the Moho, lower crust and the basement under Ganga foredeep, the former two also appear to be upwarped as crustal bulge with respect to their depths in adjoining sections. The gravity and the geoid anomaly maps of the NW India provide two specific trends, NW-SE and NE-SW oriented highs due to the lithospheric flexure along the NW Himalayan fold belt in the north and the Western fold belt (Kirthar -Sulaiman ranges, Pakistan) and the Aravalli Delhi Fold Belt (ADFB) in the west, respectively. The lithospheric flexures also manifest them self as crustal bulge and shallow basement ridges such as Delhi — Lahore — Sagodha ridge and Jaisalmer — Ganganagar ridge. There are other NE-SW oriented gravity and geoid highs that may be related to thermal events such as plumes that affected this region. The ADFB and its margin faults extend through Ganga basin and intersect the NW Himalayan front in the Nahan salient and the Dehradun reentrant that are more seismogenic. Similarly, the extension of NE-SW oriented gravity highs associated with Jaisalmer — Ganganagar flexure and ridge towards the Himalayan front meets the gravity highs of the Kangra reentrant that is also seismogenic and experienced a 7.8 magnitude earthquake in 1905. Even parts of the lithospheric flexure and related basement ridge of Delhi — Lahore — Sargodha show more seismic activity in its western part and around Delhi as compared to other parts. The geoid highs over the Jaisalmer — Ganganagar ridge passes through Kachchh rift and connects it to plate boundaries towards the SW (Murray ridge) and NW (Kirthar range) that makes the Kachchh as a part of a diffused plate boundary, which, is one of the most seismogenic regions with large scale mafic intrusive that is supported from 3-D seismic tomography. The modeling of regional gravity field along a profile, Ganganagar — Chandigarh extended beyond the Main Central Thrust (MCT) constrained from the various seismic studies across different parts of the Himalaya suggests crustal thickening from 35-36 km under plains up to ～56 km under the MCT for a density of 3.1 g/cm³ and 3.25 g/cm³ of the lower most crust and the upper mantle, respectively. An upwarping of ～3 km in the Moho, crust and basement south of the Himalayan frontal thrusts is noticed due to the lithospheric flexure. High density for the lower most crust indicates partial eclogitization that releases copious fluid that may cause reduction of density in the upper mantle due to sepentinization (3.25 g/cm³). It has also been reported from some other sections of Himalaya. Modeling of the residual gravity and magnetic fields along the same profile suggest gravity highs and lows of NW India to be caused by basement ridges and depressions, respectively. Basement also shows high susceptibility indicating their association with mafic rocks. High density and high magnetization rocks in the basement north of Chandigarh may represent part of the ADFB extending to the Himalayan front primarily in the Nahan salient. The Nahan salient shows a basement uplift of ～ 2 km that appears to have diverted courses of major rivers on either sides of it. The shallow crustal model has also delineated major Himalayan thrusts that merge subsurface into the Main Himalayan Thrust (MHT), which, is a decollment plane.     

Structural and magnetic fabric studies of recess structures in the western Himalaya: Implications for 1905 Kangra earthquake

Kinematic information from deformation structures and magnetic fabrics are used to infer recent tectonics around Kangra and Dehradun recesses, western Himalaya. Three types of magnetic fabrics (Type I & II, III, and IV) are identified based on the angle between K3 axis and bedding pole. It was observed that Kangra recess shows more mature fabric type IV as compared to Dehradun recess, where orientation of K3 axes and tectonic fabric reveals dominance of superposed deformation. In the vicinity of Dehradun recess, normal faults occur in un-indurated Quaternary fan deposits confirming their recent formation. The observations are in conformity with earlier studies that during the 1905 Kangra earthquake, the Main Boundary Thrust (MBT) (or one of its subsidiary thrusts) near Kangra showed thrusting whereas the MBT near Dehradun underwent either normal faulting or post seismic adjustments characteristic of normal faulting. The thrusting could be a result of subsurface processes whereas the normal faulting was a result of prevailing surface strains.     

Seismic microzonation study in Doon valley, northwest Himalaya, India

Fundamental frequency map of site amplification at different sites in Doon valley, Uttarakhand, India is prepared from microtremor (ground ambient noise) using Horizontal to Vertical Spectral Ratio (HVSR) technique. The fan deposited alluvium filled synclinal valley of Doon lies between Main Boundary Thrust (MFT) and Himalayan Frontal Thrust (HFT) in the Himalayan active seismic belt and experienced many earthquakes in the past. The HVSR at different sites in the Doon valley ranges between the predominant frequencies 0.13 and 12.77 Hz. The HVSR in lower frequencies indicates that the site has either thick sediment covers or less compact rocks with fractures. Based on information on fundamental frequency and soft soil thickness, site classification map is generated. Results indicate that degree of compactness of rock types and presences of sediments vary significantly, which may play a major role in seismic hazard. The use of microtremor, therefore, constitutes an effective and inexpensive approach to site response and soft soil thickness estimation for preliminary microzonation.     

The Siwaliks of western Nepal: I. Geometry and kinematics

The Siwalik Group which forms the southern zone of the Himalayan orogen, constitutes the deformed part of the Neogene foreland basin situated above the downflexed Indian lithosphere. It forms the outer part of the thin-skinned thrust belt of the Himalaya, a belt where the faults branch off a major décollement (MD) that is the external part of the basal detachment of Himalayan thrust belt. This décollement is located beneath 13 Ma sediments in far-western Nepal, and beneath 14.6 Ma sediments in mid-western Nepal, i.e., above the base of the Siwalik Group. Unconformities have been observed in the upper Siwalik member of western Nepal both on satellite images and in the field, and suggest that tectonics has affected the frontal part of the outer belt since more than 1.8 Ma. Several north dipping thrusts delineate tectonic boundaries in the Siwalik Group of western Nepal. The Main Dun Thrust (MDT) is formed by a succession of 4 laterally relayed thrusts, and the Main Frontal Thrust (MFT) is formed by three segments that die out laterally in propagating folds or branch and relay faults along lateral transfer zones. One of the major transfer zones is the West Dang Transfer Zone (WDTZ), which has a north-northeast strike and is formed by strike-slip faults, sigmoid folds and sigmoid reverse faults. The width of the outer belt of the Himalaya varies from 25 km west of the WDTZ to 40 km east of the WDTZ. The WDTZ is probably related to an underlying fault that induces: (a) a change of the stratigraphic thickness of the Siwalik members involved in the thin-skinned thrust belt, and particularly of the middle Siwalik member; (b) an increase, from west to east, of the depth of the décollement level; and (c) a lateral ramp that transfers displacement from one thrust to another. Large wedge-top basins (Duns) of western Nepal have developed east of the WDTZ. The superposition of two décollement levels in the lower Siwalik member is clear in a large portion of the Siwalik group of western Nepal where it induces duplexes development. The duplexes are formed either by far-travelled horses that crop out at the hangingwall of the Internal Décollement Thrust (ID) to the south of the Main Boundary Thrust, or by horses that remain hidden below the middle Siwaliks or Lesser Himalayan rocks. Most of the thrusts sheets of the outer belt of western Nepal have moved toward the S–SW and balanced cross-sections show at least 40 km shortening through the outer belt. This value probably under-estimates the shortening because erosion has removed the hangingwall cut-off of the Siwalik series. The mean shortening rate has been 17 mm/yr in the outer belt for the last 2.3 Ma.     

Concealed thrusts in the Middle Gangetic plain,India – A ground penetrating radar study proves the truth against the geomorphic features supporting normal faulting

As no evidence for thrusting has yet been reported from the Indo-Gangetic plain so, the Himalayan Frontal Thrust (HFT) has been considered to be the southern most limit of the Siwaliks to the Indo-Gangetic plain. The present study highlights the thrusting activities between the Gandak and Kosi megafan area in the Middle Gangetic plain. As these thrust sheets are concealed beneath thick sediment cover, direct surficial studies of the discontinuity planes are not possible. Further, the topographic breaks formed by the backward erosion of the uplifted thrust faces resemble normal faults with hanging walls to south. Due to gradual decreasing upliftment and/or erosion from north to south, the area shows a step like topographic appearance. Ground penetrating radar (GPR) studies reveal the concealed thrust planes beneath the sediments and the topographic breaks looking like normal faults are interpreted to be the relief created by backward erosion of the thrust sheets along with the overlying sediments. Out of four GPR profiles taken using 100 MHz antennae, three are across the topographic breaks along which most of the terminal fans are formed and one across the basement fault to study its subsurface nature. Initially GPR failed to strike any subsurface discontinuities at the topographic breaks. However, at certain distance to the south of the topographic breaks, GPR was able to strike the northerly dipping subsurface discontinuity planes. By combining the seismological signatures (distribution of earthquake epicenters) with geomorphology, these discontinuities are identified as thrusts. The GPR profiles show a gradual decrease of dip of the thrust planes from north to south across the area. Hence, by the geomorphology, seismological behavior, topography, orientation and continuity, other topographic breaks can be compared with the proven thrusts. GPR study on the basement fault revealed that the NE–SW trending basement faults are not active in the area. The compression between the South Muzaffarpur fault and the peninsular shield led to the generation of the N–S trending extensional Hathauri–Simariaghat fault with downthrown block towards east. Due to depth penetration limit, the GPR study was confined within 15 m depth. The presence of the discontinuity planes up to the base of the GPR profiles indicate their continuity at least up to the base of Holocene sediments. Although this study brought out the presence of concealed thrusts to the south of the HFT, more detailed work is needed further to study their depth extension, relation to the basement and their implication in Himalayan tectonics in a broad manner. At present, we consider these thrusts to be the splays of the HFT. For confirmation, we propose to carryout detail seismic surveys in future research work.     

A balanced cross section across the Himalayan foreland belt, the Punjab and Himachal foothills: A reinterpretation of structural styles and evolution

The Siwaliks in the foothills of the Himalayas, containing molasse sediments derived from the rising mountain front, represent a foreland fold-thrust belt which was deformed during the continued northward convergence of the Indian plate following the continent-continent collision. In this contribution we present balanced and restored cross sections along a line from Adampur through Jawalamukhi to Palampur in the foothills of the Punjab and Himachal Himalayas using published surface/subsurface data. The cross section incorporates all the rock units of the Sub-Himalaya Zone as well as that of the northern Lesser Himalaya Zone. The structural geometry of the fold-thrust belt in this section is largely controlled by three buried thrusts within the Sundernagar Formation of the Lesser Himalaya Zone. Two of these buried thrusts splay from the basal detachment and delineate a buried horse. Three thrusts towards foreland, including the Main Frontal Thrust (inferred to be a blind thrust in this sector), splay from these buried thrusts. In the hinterland, an anticlinal fault-bend fold was breached by a sequence of break-back thrusts, one of which is the Main Boundary Thrust. A foreland propagating thrust system is inadequate to explain the evolution of the fold-thrust-belt in this section. We show that a “synchronous thrusting” model in whichin-sequence initiation of thrusts at depth combined with continued motion on all the thrusts leading toout-of-sequence imbrication at the upper structural levels better explains the evolution of the fold-thrust belt in the Jawalamukhi section. The estimated shortening between the two chosen pin lines is about 36% (about 72 km).     

Active tectonics in the Assam seismic gap between the meizoseismal zone of AD 1934 and 1950 earthquakes along eastern Himalayan front,India

The Assam Seismic Gap has witnessed a long seismic quiescence since the \({ Mw}{\sim }8.4\) great Assam earthquake of AD 1950. Owing to its improper connectivity over the last decades, this segment of the Himalaya has long remained inadequately explored by geoscientists. Recent geodetic measurements in the eastern Himalaya using GPS document a discrepancy between the geologic and geodetic convergence rates. West to east increase in convergence rate added with shorter time span earthquakes like the 1697 Sadiya, 1714 (\({ Mw}{\sim }8\)) Bhutan and 1950 (\({ Mw}{\sim } 8.4\)) Tibet–Assam, makes this discrepancy more composite and crucial in terms of seismic hazard assessment. To understand the scenario of palaeoearthquake surface rupturing and deformation of youngest landforms between the meizoseismal areas of \({ Mw}{\sim }8.1\) 1934 and 1950 earthquakes, the area between the Manas and Dhanshiri Rivers along the Himalayan Frontal Thrust (HFT) was traversed. The general deformation pattern reflects north-dipping thrust faults. However, back facing scarps were also observed in conjugation to the discontinuous scarps along the frontal thrust. Preliminary mapping along with the published literature suggests that, in the eastern Himalayan front the deformation is taking place largely by the thrust sheet translation without producing a prominent fault-related folds, unlike that of the central and western Himalayas.     

Seismic Activity in the Himalayan Orogenic Belt and Its Related Geohazards

Himalayan orogenic belt is the highest and largest continental collision and subduction zone on the Earth. The Himalayan orogenic belt has produced frequent large earthquakes and caused several geohazards due to landslides and housing collapse, having an impact on the safety of life and property along a length of over 2500 km. Here we took three earthquake clusters as examples, which occurred at Nepal Himalaya, eastern Himalayan syntaxis and western Himalayan syntaxis, respectively. Here we calculated the earthquake locations and fault plane solutions based on the waveform data recorded by seismic stations deployed in source areas by the Institute of Tibetan Plateau Research, Chinese Academy of Sciences. We found that at the Nepal Himalayan, the Main Himalayan Thrust is the major tectonic structure for large earthquakes to occur. At the eastern Himalayan syntaxis, most earthquakes are of the reverse or strike-slip faulting. The major tectonic feature is the combination of the NE-dipping thrust with the southeastern escape of the Tibetan plateau. At the western Himalayan syntaxis, intermediate-depth earthquakes are active. These observations reveal the geometry of the deep subduction of the continental plate with steep dipping angle.     

喜马拉雅造山带地震活动及其相关地质灾害

喜马拉雅造山带是地球上海拔最高、规模最大的陆陆板块俯冲碰撞带在这条长达2 500 km的板块边界上,近年来多次发生破坏性地震,造成大规模的滑坡、房屋倒塌等次生灾害,给人民生命和财产安全造成严重的威胁。分别选取尼泊尔喜马拉雅、喜马拉雅东构造结和喜马拉雅西构造结地区近期发生的3个地震震群作为研究实例,基于中国科学院青藏高原研究所在研究区架设的区域流动地震台站记录的波形资料,对地震的震源位置和震源机制解进行计算。结果表明,在尼泊尔喜马拉雅地区,主喜马拉雅逆冲断裂是大地震的主要发震构造;东构造结地区的地震以逆冲和走滑型为主,表明印度板块向北东方向的逆冲推覆和青藏高原向东南逃逸的侧向挤出是该地区的主要构造背景;西构造结地区中深源地震多发,揭示了高角度大陆深俯冲的几何形态。     

Tectonic morphometric studies as a tool for terrain characterization in the Himalayan foothill region — A case study

The Himalayan foothill region is traversed by the Main Boundary Thrust, the Himalayan Frontal Thrust and the Piedmont Fault which make the entire densely populated foothill region vulnerable to seismic damages. Tectonic morphometric studies of selected active tectonic indices in conjunction with analysis of multispectral satellite imagery of the foothill terrain from North of Chandigarh to West of Dehradun have revealed the presence of two major active faults. The Jainti Devi Fault, in the vicinity of Chandigarh, has offset nearly all the drainage channels by about 780 m while the Trilokpur Fault, in the vicinity of Nahan, has offset the streams and rivulets by about 1500 m. The values of ratio of valley floor width to valley height, the stream length gradient index, stream sinuosity index and mountain front sinuosity index have been computed and these reaffirm the active tectonic setup of the foothill terrain. The digital terrain model and field investigations reveal the presence of offset streams, sag ponds, linear valleys, shutter ridges and pressure ridges along the fault trace. Trenching carried out in the region has revealed the presence of numerous seismites.     

Differential Tectonic Deformation of the Longmen Mountain Thrust Belt,Western Sichuan Basin,China

Field investigation and seismic section explanation showed that the Longmen Mountain Thrust Belt has obvious differential deformation: zonation, segmentation and stratification. Zonation means that, from NW to NE, the Longmen Mountain Thrust Belt can be divided into the Songpan-Garzê Tectonic Belt, ductile deformation belt, base involved thrust belt, frontal fold-thrust belt, and foreland depression. Segmentation means that it can be divided into five segments from north to south: the northern segment, the Anxian Transfer Zone, the center segment, the Guanxian Transfer Zone and the southern segment. Stratification means that the detachment layers partition the structural styles in profile. The detachment layers in the Longmen Mountain Thrust Belt can be classified into three categories: the deep-level detachment layers, including the crust-mantle system detachment layer, intracrustal detachment layer, and Presinian system basal detachment layer; the middle-level detachment layers, including Cambrian-Ordovician detachment layer, Silurian detachment layer, etc.; and shallow-level detachment layers, including Upper Triassic Xujiahe Formation detachment layer and the Jurassic detachment layers. The multi-level detachment layers have a very important effect on the shaping and evolution of Longmen Mountain Thrust Belt.