Spectra of a shallow sea—unmixing for class identification and monitoring of coastal waters

Ocean colour-based monitoring of water masses is a promising alternative to monitoring concentrations in heterogeneous coastal seas. Fuzzy methods, such as spectral unmixing, are especially well suited for recognition of water masses from their remote sensing reflectances. However, such models have not yet been applied for water classification and monitoring. In this study, a fully constrained endmember model with simulated endmembers was developed for water class identification in the shallow Wadden Sea and adjacent German Bight. Its performance was examined on in situ measured reflectances and on MERIS satellite data. Water classification by means of unmixing reflectance spectra proved to be successful. When the endmember model was applied to MERIS data, it was able to visualise well-known spatial, tidal, seasonal, and wind-related variations in optical properties in the heterogeneous Wadden Sea. Analyses show that the method is insensitive to small changes in endmembers. Therefore, it can be applied in similar coastal areas. For use in open ocean situations or coastal or inland waters with other specific inherent optical properties, re-simulation of the endmember spectra with local optical properties is required. However, such an adaptation requires only a limited number of local in situ measurements.     

Environmental crisis management: The role of a scientific organization in relation to the North Sea from 1987 to 1993

The North Sea is a relatively shallow body of water in an enclosed area with limited exchanges with the Atlantic Ocean. The impact of humans has become a threat to the continued welfare of this very important sea. The role in policy-making of the North Sea Task Force (NSTF), which operated from 1988–1993, are reviewed and its main results as a scientific body presented. Further developments to improve the scientific knowledge of environmental problems in the North Sea are suggested.     

Temperature as a Tool to Evaluate Aerobic Biodegradation in Hydrocarbon Contaminated Soil

This study evaluates the theory, and some practical aspects of using temperature measurements to assess aerobic biodegradation in hydrocarbon contaminated soil. The method provides an easily applicable alternative for quantifying the rate of biodegradation and/or evaluating the performance of in situ remediation systems. The method involves two nonintrusive procedures for measuring vertical temperature profiles down existing monitoring wells; one using a thermistor on a cable for one‐time measurements and the other using compact temperature data loggers deployed for 3‐month to 1‐year period. These vertical temperature profile measurements are used to identify the depth and lateral extent of biodegradation as well as to monitor seasonal temperature changes throughout the year. The basic theory for using temperature measurements to estimate the minimum rate of biodegradation will be developed, and used to evaluate field measurements from sites in California where biodegradation of spilled petroleum hydrocarbons is due to natural processes. Following, temperature data will be used to evaluate the relative rates of biodegradation due to natural processes and soil vapor extraction (SVE) at a former refinery site in the North‐Central United States. The results from this study show that the temperature method can be a simple, cost effective tool for assessing biodegradation in the soil, and optimizing remediation systems at a wide variety of hydrocarbon spill sites.     

Eelpout (Zoarces viviparus) in marine environmental monitoring

The implementation of the EU Marine Strategy Framework Directive necessitates the development of common criteria and methodological standards for marine environmental monitoring and assessment across Europe. Eelpout (Zoarces viviparus) is proposed as a key indicator organism in the Baltic and North Sea regions. This benthic fish species is widely used in ecotoxicological studies and as a bioindicator of local pollution due to its stationary behavior. Eelpout is included in the environmental monitoring program of several Baltic States, covering both chemical and biological effects measurements, and samples have been archived in environmental specimen banks for >15 years. A method for evaluating the frequency of larval aberrations has been suggested as a standardized assessment tool. The large scientific knowledge-base and considerable experience of long-term chemical and biological effects monitoring and specimen banking, make eelpout a suitable species for the assessment of Good Environmental Status in the Baltic and North Seas.     

Performance of operational systems with respect to water level forecasts in the Gulf of Finland

This paper is devoted to the validation of water level forecasts in the Gulf of Finland. Daily forecasts produced by four setups of operational, three-dimensional Baltic Sea oceanographic models are analyzed using statistical means and are compared with water level observations at three Finnish stations located on the northern coast of the Gulf of Finland. The overall conclusion is that the operational systems were skillful in forecasting water level variations during the study period from November 1, 2003, to January 31, 2005. The factors causing differences between the water level forecasts of different models are discussed as well. An important task of operational sea level forecasting services is to provide accurate and early information about extreme water levels, both positive and negative surges. During the study period, two major winter storms occurred which caused coastal flooding in the region. According to our analysis, the operational models forecast the rise of water levels during these events rather successfully. Nowadays, operational forecasts can provide early warnings of extreme water levels at least 1 day in advance, which may be regarded as a minimum requirement for an operational forecasting system. The paper concludes that the models generally performed very well, with over 93% of the hourly water level forecasts found to be within the range of ±15 cm of the observed water levels, and with the timing of the water level peaks accurately predicted. Further discussion and studies dealing with the assessment of the skills of both operational meteorological and oceanographic forecasts, especially in connection with rare surge events, will be necessary. Skill assessment of operational oceanographic models would be relatively easy if acceptable error limits or a quality system was developed for the Baltic Sea operational models.     

Heavy metals in Baltic herring and cod

The monitoring programme of harmful substances in selected species in the Baltic Sea was started in 1979. In the present study, three-year averages of Zn, Cu, Cd and Pb in cod liver (Hg in cod muscle) and herring muscle are reported. The concentrations of heavy metals in cod show areal differences roughly in accordance with the concentrations of heavy metals in sea water. No significant differences between heavy metal concentrations in North Atlantic and Baltic Sea species were found, except for mercury, for which values in the Baltic Sea species are lower than in those from the North Atlantic.     

4D technology: where are we,and where are we going?

4D reservoir monitoring is now becoming established as a normal part of business in some companies, in some regions such as the North Sea, and for some applications, such as thermally enhanced oil recovery. Some spectacular technical successes have been reported, mostly in monitoring water floods. We are beginning to understand how to acquire and process surveys to achieve good results. There is still, however, much to improve in how we use 4D technology to capture its potential value in field management and still some way to go in the tool itself, to make it faster, cheaper and more sensitive to small production effects.     

Developing Data-Rich Video of Surface Water–Groundwater Interactions for Public Engagement

Communication of hydrologic data to the public can be improved by connecting data to the places they represent. In our example of data communication, we coupled hydrologic data with simultaneously collected video as both a scientific and public engagement tool. This note presents a method for collecting spatially and temporally dense datasets of water-quality and geophysical data on small streams and lakes, and for displaying the data in a user-friendly format using commercially available software. With this method, multiple instruments are mounted on a canoe and a controlled survey float is carried out to collect data. The data stream is georeferenced and logged using an Arduino microcontroller to provide detailed information about spatial variability. We employed these continuous data-collection methods at small streams and lakes across Wisconsin, USA. Comparison of stream-float sensor data to lab reported data, data collected by alternative sensors, and previously collected data in our study areas indicates that the low-cost temperature, electrical conductivity, pH, and dissolved oxygen sensors performed well. GoPro cameras recorded video throughout the duration of data collection. Our established water-quality and geophysical data collection methods are inexpensive, fast, and reliable, which qualify them as excellent tools for fine-scale spatial understanding of stream and lake habitats' health. Data-rich video connects point measurements of water properties to the appearance of the native environment. This method helps improve our understanding of groundwater and surface water interactions in complex hydrogeologic systems, enhance communication amongst stakeholders, and provide context when monitoring and managing sensitive habitats.     

Towards continuous long-term measurements of suspended particulate matter (SPM) in turbid coastal waters

The dynamics of sediment transport in the East Frisian Wadden Sea are important for the coastal zone and for ecosystem functioning. The tidal inlets between the East Frisian islands connect the back-barrier intertidal flats to the North Sea. Here, concentrations of suspended particulate matter (SPM) in the water column are highly variable, depending on weather conditions and tides. In order to estimate the nature and quantity of sediment transport, in situ measurements were carried out at a Time Series Station in the tidal inlet between the islands of Spiekeroog and Langeoog. This study shows the suitability of multispectral transmissometry (MST) for obtaining long-term SPM measurements with high resolution. The comparability of this technique to the standard filter method and the laser diffraction method [laser in situ scattering and transmissometry (LISST)] is demonstrated. In addition, the Junge coefficients derived from both MST and LISST measurements are compared. A time series of SPM data covering nearly 4 months is presented. As a major result, the data reveal that a single storm surge can have less impact on SPM dynamics than longer-lasting gales. This high-resolution long-term data set is very valuable for modelling suspended matter flux. It also provides background information for studying the influence of SPM dynamics on coastal sediments.     

Use of Computers in the Field

Performing long-term pump tests, single-well aquifer tests and long-term ground water monitoring were, in the past, considered costly and labor-intensive tasks. However, because of recent advances in portable data acquisition systems, these field tests can be performed in a relatively cost-effective and efficient manner. Certain data acquisition systems (DAS) have unique options available. Recently developed and commonly used computers are the Envirolab®, the Paroscientific®, and the In-Situ®. The use of implementing DAS in ground water field studies has proved to be successful when compared to the many disadvantages of performing those tasks manually. Successful acquisition of aquifer characterization data using computerized methods is highly dependent on the implementation of proper field programming and operational procedures. In order to provide high qualify and meaningful data, the field operator must be familiar with proper equipment implementation and programming instructions. Once familiar with these procedures, the use of DAS in the field provides a cost-effective and efficient tool for aquifer testing.     

Geophone orientation and coupling in three-component sea-floor data: a case study

We analyse the geophone orientation and coupling in a data set from the North Sea. Based on the polarization of the water-break on the sea-floor, we have derived processing algorithms for determining the receiver orientation for gimballed and non-gimballed geophone systems. For a gimballed system, the problem reduces to a simple horizontal rotation. However, for a non-gimballed system, where all three geophone axes may vary due to varying acquisition conditions such as dipping sea-floor, twisting of recording cable, etc., the three orientation angles cannot be found directly from the recorded displacement vectors. Using the data redundancy within a common-receiver gather, a robust two-stage method is derived for the non-gimballed system in which all three orientations can initially be unknown. Testing on the North Sea data set acquired with a gimballed system shows that the three-component geophones in the data set are orientated satisfactorily within an error of 5°. However, there are some undesirable cross-couplings between the vertical and horizontal geophones, which results in leakage of shear-wave energy from the horizontal components to the vertical components.     

The occurrence of the cold-water coral Lophelia pertusa (Scleractinia) on oil and gas platforms in the North Sea: colony growth, recruitment and environmental controls on distribution

This study reports a newly established sub-population of Lophelia pertusa, the dominant reef-framework forming coral species in the north-east Atlantic, on oil and gas platforms in the northern North Sea. L. pertusa was positively identified on 13 of 14 platforms examined using existing oil and gas industry visual inspections. Two platforms were inspected in more detail to examine depth and colony size distributions. We recorded 947 colonies occurring between 59 and 132 m depth that coincides with cold Atlantic water at depths below the summer thermocline in the northern North Sea. We suggest that these colonies provide evidence for a planktonic larval stage of L. pertusa with recruits initially originating from populations in the north-east Atlantic and now self recruiting to the platforms. Size class distribution showed a continuous range of size classes, but with few outlying large colonies. The break between the largest colonies and the rest of the population is considered as the point when colonies began self recruiting to the platforms, resulting in greater colonization success. We present the first documented in situ colony growth rate estimate (26 +/- 5 mm yr(-1)) for L. pertusa based on 15 colonies from the Tern Alpha platform with evidence for yearly recruitment events starting the year the platform was installed. Evidence of contamination from drill muds and cuttings was observed on the Heather platform but appeared limited to regions close to drilling discharge points, where colonies experience partial as well as whole colony mortality.     

Data assimilation with the EnKF in a 1-D numerical model of a North Sea station

A series of numerical experiments for data assimilation with the Ensemble Kalman Filter (EnKF) in a shallow water model are reported. Temperature profiles measured at a North Sea location, 55°30ˊ North and 0°55ˊ East (referred to as the CS station of the NERC North Sea project), are assimilated in 1-D simulations. Comparison of simulations without assimilation to model results obtained when assimilating data with the EnKF allows us to assess the filter performance in reproducing features of the observations not accounted for by the model. The quality of the model error sampling is tested as well as the validity of the Gaussian hypothesis underlying the analysis scheme of the EnKF. The influence of the model error parameters and the frequency of the data assimilation are investigated and discussed. From these experiments, a set of optimal parameters for the model error sampling are deduced and used to test the behavior of the EnKF when propagating surface information into the water column.     

Integrated environmental management: The Dutch Governmental view

In the last 10 years concern for the economic and ecological value of the North Sea has increased. Many different users are putting increasing pressure on the resources of the North Sea and its adjacent estuaries. Its uses include shipping, fisheries, the oil and gas industry, mineral extraction, and—along its shores—recreation. The North Sea suffers pollution directly from some of these sources, but also indirectly from discharges from land, from rivers and from the atmosphere. The resilience of the North Sea ecosystem puts limits on the human use. These limits have in a number of cases been exceeded. It is necessary to define and assess the sustainable use of the North Sea ecosystem. The sustainable use may be defined as the long-term use of current and future potential while ensuring sustainable conservation of the ecological value of the North Sea and adjacent vulnerable water systems. Integrated environmental management for the North Sea implies that policy-makers assess all interests and resolve any conflicts which arise. This paper considers the problem of input of organic substances into the North Sea. It considers a target scenario of sustainable use and ecological health, in relation to what concentrations of organic substances are permissible. Secondly, it considers a target percentage reduction in current inputs. Thirdly, it is necessary to give the measures to be taken to deal with the major sources of the pollution, i.e. to define target groups. Finally, the paper gives examples of the statutory instruments available to implement the chosen policy.     

Assessment of metal concentrations found within a North Sea drill cuttings pile

North Sea drill cuttings piles are a distinct anthropogenic legacy resulting from the exploration and production of North Sea oil reserves. The need to understand metal cycling within the piles becomes increasingly important with the imminent decommissioning of many North Sea platforms and the subsequent fate of associated cuttings piles. This paper presents results of the simultaneous analysis of geochemical carrier substances (Mn and Fe oxyhydroxides), along with dissolved (<0.2 microm) and total (>0.2 microm) metal (Ba, Co, Cr, Cu, Mo, Pb, V) concentrations from a North Sea cuttings pile and surrounding sediment. These data are examined in conjunction with in situ measured porewater oxygen and sulfide. Results show a rapid removal of oxygen within the top few millimeters of the cuttings pile along with elevated concentrations of total hydrocarbons and solid phase metal concentrations compared to the surrounding environment.     

张衡一号卫星记录的空间电磁波传播特征分析方法及算法实现

本研究主要利用张衡一号电磁卫星(CSES)记录的电磁场波形数据,研发了电磁波波矢量分析工具,该工具包提供电磁波形频谱变换、奇异值分解(SVD)方法以及坡印廷能流计算功能.选取了张衡一号卫星在ULF/ELF/VLF频段观测到的哨声波、准周期辐射、电离层嘶声波等典型波动事件,开展了频谱分析和波矢量分析.通过与DEMETER卫星的对比观测研究,验证了算法的正确性,并且初步探讨了这些波动的传播特征,其结果也验证了张衡一号卫星在电磁场观测方面具有良好的性能.本研究研发的波矢量分析工具包可直接运用到张衡一号卫星的常规数据处理和科学分析应用中.     

On wave radar measurement

The SAAB REX WaveRadar sensor is widely used for platform-based wave measurement systems by the offshore oil and gas industry. It offers in situ surface elevation wave measurements at relatively low operational costs. Furthermore, there is adequate flexibility in sampling rates, allowing in principle sampling frequencies from 1 to 10 Hz, but with an angular microwave beam width of 10° and an implied ocean surface footprint in the order of metres, significant limitations on the spatial and temporal resolution might be expected. Indeed there are reports that the accuracy of the measurements from wave radars may not be as good as expected. We review the functionality of a WaveRadar using numerical simulations to better understand how WaveRadar estimates compare with known surface elevations. In addition, we review recent field measurements made with a WaveRadar set at the maximum sampling frequency, in the light of the expected functionality and the numerical simulations, and we include inter-comparisons between SAAB radars and buoy measurements for locations in the North Sea.     

The impact of freshwater discharges on the ocean circulation in the Skagerrak/northern North Sea area Part I: model validation

We assess the performance of an eddy-recognizing numerical ocean model in simulating the pattern and variability of the hydrography in the Skagerrak/northern North Sea area. The model we use is a version of the widely used Princeton ocean model employing a terrain-following vertical coordinate. Results from a series of five multi-year simulations of the mesoscale response are described. The simulations differ in their representation of the lateral freshwater supply to the model ocean of which the first is a reference simulation. The next four are variations in which the river discharges and/or the Baltic outflow are given more realistic representations. For validation, we have used in situ hydrographic data. A novelty is that we use the concepts of freshwater height and potential energy anomaly as objective validation tools. We find that, in general, the model faithfully reproduces many of the observed hydrographic features including their mean patterns and their variance. Not surprisingly, we find that the Baltic outflow is by far the most significant freshwater source in terms of its influence on the hydrography in the area, a result corroborating earlier findings. The best validation is obtained when all freshwater supply is made as realistic as possible, in particular the Baltic outflow. We also find that the large scale cyclonic circulation and the location of fronts are robust characteristics of the Skagerrak/northern North Sea circulation given the impact changes in the freshwater input has on the hydrography. Finally, we find that a further exploration of the impact of the lateral open boundary forcing, e.g., the input of Atlantic water, is needed.     

Groundwater Storage Changes: Present Status from GRACE Observations

Satellite gravity measurements from the Gravity Recovery and Climate Experiment (GRACE) provide quantitative measurement of terrestrial water storage (TWS) changes with unprecedented accuracy. Combining GRACE-observed TWS changes and independent estimates of water change in soil and snow and surface reservoirs offers a means for estimating groundwater storage change. Since its launch in March 2002, GRACE time-variable gravity data have been successfully used to quantify long-term groundwater storage changes in different regions over the world, including northwest India, the High Plains Aquifer and the Central Valley in the USA, the North China Plain, Middle East, and southern Murray–Darling Basin in Australia, where groundwater storage has been significantly depleted in recent years (or decades). It is difficult to rely on in situ groundwater measurements for accurate quantification of large, regional-scale groundwater storage changes, especially at long timescales due to inadequate spatial and temporal coverage of in situ data and uncertainties in storage coefficients. The now nearly 13 years of GRACE gravity data provide a successful and unique complementary tool for monitoring and measuring groundwater changes on a global and regional basis. Despite the successful applications of GRACE in studying global groundwater storage change, there are still some major challenges limiting the application and interpretation of GRACE data. In this paper, we present an overview of GRACE applications in groundwater studies and discuss if and how the main challenges to using GRACE data can be addressed.