Porosity of bimodal and trimodal sediment mixtures

This study focuses on the prediction of the porosity of nonuniform sediment mixtures,considering the effects of particle packing.A random particle packing model has been developed for the porosity of bimodal mixtures by extending the existing random particle filling theory.Coefficients in the developed model are calibrated by fitting the model to measured data for a variety of bimodal mixtures,including spherical glass particles,rounded quarry grains,and natural sediments.The model coefficients ...     

A probabilistic model for sediment entrainment:The role of bed irregularity

A generalized probabilistic model is developed in this study to predict sediment entrainment under the incipient motion, rolling, and pickup modes. A novelty of the proposed model is that it incorporates in its formulation the probability density function of the bed shear stress, instead of the near-bed velocity fluctuations, to account for the effects of both flow turbulence and bed surface irregularity on sediment entrainment. The proposed model incorporates in its formulation the collective effects of three para-meters describing bed surface irregularity, namely the relative roughness, the volumetric fraction and relative position of sediment particles within the active layer. Another key feature of the model is that it provides a criterion for estimating the lift and drag coefficients jointly based on the recognition that lift and drag forces acting on sediment particles are interdependent and vary with particle protrusion and packing density. The model was validated using laboratory data of both fine and coarse sediment and was compared with previously published models. The study results show that all the examined models perform adequately for the fine sediment data, where the sediment particles have more uniform gra-dation and relative roughness is not a factor. The proposed model was particularly suited for the coarse sediment data, where the increased bed irregularity was captured by the new parameters introduced in the model formulation. As a result, the proposed model yielded smaller prediction errors and physically acceptable values for the lift coefficient compared to the other models in case of the coarse sediment data.     

Hindered settling with an apparent particle diameter concept

In this work a new expression has been developed to predict the settling velocity of a sediment particle which is dispersed in a sediment-fluid mixture during a turbulent flow. A concept of apparent particle diameter has been introduced and is defined by the diameter of the spherical volume in which the particle can move randomly after collision with other particles in suspension. The effect of suspension concentration is studied on the mass density of the sediment-fluid mixture. It has been shown that the settling velocity of sediment particle in a sediment-fluid mixture is a function of different characteristics of the sediment particle such as settling velocity in clear fluid, suspension concentration, relative mass density and Reynolds number. The model has shown good agreement when compared with previously published experimental data and it’s prediction accuracy is superior than the other existing models.     

Hyperconcentrated flows as influenced by coupled wind-water processes

Hyperconcentrated flow is a natural phenomenon, which is widely observed on the Loess Plateau of China[1,2]. So far, much research has been done with hyperconcentrated flows in China[1―7], although hy-perconcentrated flows are also observed in many riv-ers in other countries[8―10]. In the monograph edited by Chien[11], hyperconcnetrated flows were studied in depth, involving the physical properties, resistance, sediment-carry behavior and channel-forming pro- cesses. Wang and Chien el al.[…     

Inviscid behaviour of fines-rich pyroclastic flows inferred from experiments on gas-particle mixtures

Experiments were carried out on granular flows generated by instantaneous release of gas-fluidised, bidisperse mixtures and propagating into a horizontal channel. The mixture consists of fine (< 100 μm) and coarse (> 100 μm) particles of same density, with corresponding grain size ratios of ∼ 2 to 9. Initial fluidisation of the mixture destroys the interparticle frictional contacts, and the flow behaviour then depends on the initial bed packing and on the timescale required to re-establish strong frictional contacts. At a fines mass fraction (α) below that of optimal packing (∼ 40%), the initial mixtures consist of a continuous network of coarse particles with fines in interstitial voids. Strong frictional contacts between the coarse particles are probably rapidly re-established and the flows steadily decelerate. Some internal friction reduction appears to occur as α and the grain size ratio increases, possibly due to particle rolling and the lower roughness of internal shear surfaces. Segregation only occurs at large grain size ratio due to dynamical sieving with fines concentrated at the flow base. In contrast, at α above that for optimal packing, the initial mixtures consist of coarse particles embedded in a matrix of fines. Flow velocities and run-outs are similar to that of the monodisperse fine end-member, thus showing that the coarse particles are transported passively within the matrix whatever their amount and grain size are. These flows propagate at constant height and velocity as inviscid fluid gravity currents, thus suggesting negligible interparticle friction. We have determined a Froude number of 2.61 ± 0.08 consistent with the dam-break model for fluid flows, and with no significant variation as a function of α, the grain size ratio, and the initial bed expansion. Very little segregation occurs, which suggests low intensity particle interactions during flow propagation and that active fluidisation is not taking place. Strong frictional contacts are only re-established in the final stages of emplacement and stop the flow motion. We infer that fines-rich (i.e. matrix-supported) pyroclastic flows propagate as inviscid fluid gravity currents for most of their emplacement, and this is consistent with some field data.     

Threshold criterion for debris flow initiation in seasonal gullies

A series of flume experiments were done to investigate the effect of grain composition on the critical gradient and discharge of debris flows initiated in seasonal gullies. The results indicated that the critical gradient and discharge for debris flow initiation decrease initially, and then increase as the mass content of fine particles (<2 mm) increases. As the mass content of fine particles increases, the angle of repose, permeability of widely graded gravel soils, and the incipient motion conditions of the coarse grains in non-uniform sediments decrease at first, and then increase. The mass content of fine particles of all inflection points is the same. The theoretical model based on the combination of hydrodynamic force and shear stress is more applicable to the prediction of the critical gradient for debris flow initiation. The critical discharge model considering the effect of non-homogeneity of the soil and the size of coarse and fine grains provides a more accurate prediction of debris flow initiation than other models based on the mean diameter.     

An analysis of the factors contributing to the settling potential of fine fluvial sediment

The settling potential of fine sediment is known to be influenced by particle size, shape, density and porosity, and is commonly predicted using Stokes's law, despite its known limitations for modelling the behaviour of natural particles. In order to develop an improved understanding of the potential for fine sediment to settle out of suspension or undergo transport by hydraulic processes, it is important to examine the role of particle structure in detail. In this study, stepwise regression was used to identify which structural properties of particles exert an important control on fine sediment behaviour in river systems. The presence of composite particles and their associated particle size, porosity and fractal dimension were shown to be the most important controls on settling potential. Composite particles that form in the aquatic environment (flocs) were shown to have significantly different form and behaviour from composite particles of terrestrial origin (aggregates). Importantly, it was demonstrated that particle structure and behaviour exhibited consistencies between contrasting river catchments in different locations. An understanding of the mechanisms responsible for the formation of composite particles is viewed as providing a valuable input to efforts to model the mobilisation, transport and fate of fine sediment. Copyright © 2008 John Wiley & Sons, Ltd.     

Evaluation of the method of collecting suspended sediment from large rivers by discharge-weighted pumping and separation by continuous-flow centrifugation

A method for collecting suspended sediment samples has been developed that pumps a discharge-weighted volume of water from fixed depths at four to 40 locations across a river and separates the suspended sediment in the sample using a continuous-flow centrifuge. The efficacy of the method is evaluated by comparing the particle size distributions of sediment collected by the discharge-weighted pumping method with the particle size distributions of sediment collected by depth integration and separated by gravitational settling. The pumping method was found to undersample the suspended sand sized particles (> 63 μm) but to collect a representative sample of the suspended silt and clay sized particles (< 63 μm). The centrifuge separated the silt and clay sized particles (< 63 μm) into three fractions. Based on the average results of processing 17 samples from the Mississippi River and several of its large tributaries in 1990, about 10% of the silt and clay sized material was trapped in a centrifuge bowl-bottom sealing unit containing the nozzle and consisted of mostly medium and coarse silt from 16 to 63 μm. About 74% was retained on a Teflon liner in the centrifuge bowl and consisted of sizes from 0–1 to 63 μm. About 9% was discharged from the centrifuge in the effluent and was finer than 0–1 μm. About 7% was lost during the processes of removing the wet sediment fractions from the centrifuge, drying and weighing. The success of the discharge-weighted pumping method depends on how homogeneously the silt and clay sized particles (< 63 μm) are distributed in the vertical direction in the river. The degree of homogeneity depends on the composition and degree of aggregation of the suspended sediment particles.     

A SEM-based method to determine the mineralogical composition and the particle size distribution of suspended sediment

A robust method for characterizing the mineralogy of suspended sediment in continental rivers is introduced. It encompasses 3 steps: the filtration of a few milliliters of water, measurements of X-ray energy dispersive spectra using Scanning Electron Microscopy (SEM), and robust machine learning tools of classification. The method is applied to suspended particles collected from various Amazonian rivers. A total of more than 204,000 particles were analyzed by SEM-EDXS (Energy Dispersive X-ray Spectroscopy), i.e. about 15,700 particles per sampling station, which lead to the identification of 15 distinct groups of mineralogical phases. The size distribution of particles collected on the filters was derived from the SEM micrographs taken in the backscattered electron imaging mode and analyzed with ImageJ freeware. The determination of the main mineralogical groups composing the bulk sediment associated with physical parameters such as particle size distribution or aspect ratio allows a precise characterization of the load of the terrigenous particles in rivers or lakes. In the case of the Amazonian rivers investigated, the results show that the identified mineralogies are consistent with previous studies as well as between the different samples collected. The method enabled the evolution of grain size distribution from fine to coarse material to be described in the water column. Implications about hydrodynamic sorting of mineral particles in the water column are also briefly discussed. The proposed method appears well suited for intensive routine monitoring of suspended sediment in river systems.     

The interaction between armouring and particle weathering for eroding landscapes

The interaction between particle weathering and surface armouring and its effect on erosion has been investigated. The effect of soil armouring is to decrease sediment transport with time by preferentially stripping away fine particles. On the other hand the effect of weathering, which breaks down the particles in the armour, is generally believed to increase erosion. By extending an existing armouring model, ARMOUR, and using a variety of published weathering mechanisms this interaction has been explored. The model predicts that while this is generally true, in some cases erosion can be decreased by weathering. When the particles generated by weathering were approximately of equal diameter, erosion increased while armouring decreased. When weathering produced very fine particles by spalling, erosion increased and armouring also increased. When weathering produced a range of particles from fine to coarse, the armour layer broke down and erosion decreased relative to the no‐weathering case. This latter decrease in erosion was due to the high entrainment of coarser transportable materials from the bed decreasing the sediment transport capacity of the flow. In these studies clear regimes could be identified where erosion was limited by either the energy of the flow alone (i.e. ‘transport‐limited’), or the rate of weathering (‘weathering‐limited’); however, for some mechanisms there was an interaction between the two, which we called ‘weathering/transport limited’. Copyright © 2006 John Wiley & Sons, Ltd.     

Dependence of sediment sorting on bedload transport phase in a river meander

It is widely recognized nowadays that there are at least two different phases of bedload sediment transport in gravel‐bed rivers. However, the transition between these phases is still poorly or subjectively defined, especially at bends in rivers, where cross‐stream sediment transport can strongly influence changes in the texture of the transported sediment. In this paper, we use piecewise models to identify objectively, at two points in the cross‐section of a river bend, the discharge at which the transition between bedload transport phases occurs. Piecewise models were applied to a new bedload data set collected during a wide range of discharges while analysing the associated changes in sediment texture. Results allowed the identification of two well‐differentiated phases of sediment transport (phase I and phase II), with a breakpoint located around bankfull discharge. Associated with each phase there was a change in bedload texture. In phase I there was non‐dominance in the transport of fine or coarse fractions at a particular sampling point; but in phase II bedload texture was strongly linked to the position of the sampling point across the channel. In this phase, fine particles tended to be transported to the inner bank, while coarse sizes were transferred throughout the middle parts of the channel. Moreover, bedload texture at the inner sampling point became bimodal while the transport of pebble‐sized particles was increasing in the central parts of the river channel. It is suggested that this general pattern may be related both to secondary currents, which transfer finer particles from the outer to the inner bank, and to the progressive dismantling of the riverbed surface layer. Copyright © 2018 John Wiley & Sons, Ltd.     

Controls on slope‐to‐channel fine sediment connectivity in a largely ice‐free valley,Hoophorn Stream,Southern Alps,New Zealand

There has been little work to date into the controls on slope‐to‐channel fine sediment connectivity in alpine environments largely ice‐free for most of the Holocene. Characterization of these controls can be expected to result in better understanding of how landscapes “relax” from such perturbations as climate shock. We monitored fine sediment mobilization on a slope segment hydrologically connected to a stream in the largely ice‐free 8·3 km² Hoophorn Valley, New Zealand. Gerlach traps were installed in ephemeral slope channels to trap surficial material mobilized during rainfall events. Channel sediment flux was measured using turbidimeters above and below the connected slope, and hysteresis patterns in discharge‐suspended sediment concentrations were used to determine sediment sources. Over the 96 day measurement period, sediment mobilization from the slope segment was limited to rainfall events, with increasingly larger particles trapped as event magnitude increased. Less than 1% of the mass of particles collected during these events was fine sediment. During this period, 714 t of suspended sediment was transported through the lower gauging station, 60% of it during rainfall events. Channel sediment transfer patterns during these events were dominated by clockwise hysteresis, interpreted as remobilization of nearby in‐channel sources, further suggesting limited input of fine sediment from slopes in the lower valley. Strong counterclockwise hysteresis, representing input of fine sediment from slope segments, was restricted to the largest storm event (JD2 2009) when surfaces in the upper basin were activated. The results indicate that the slopes of the lower Hoophorn catchment are no longer functioning as sources of fine sediment, but rather as sources of coarse material, with flux rates controlled by the intensity and duration of rainfall events. Although speculative, these findings suggest a shift to a coarse sediment dominated slope‐to‐channel transfer system as the influence of pre‐Holocene glacial erosion declines. Copyright © 2011 John Wiley & Sons, Ltd.     

A coupled local–global upscaling approach for simulating flow in highly heterogeneous formations

A new technique for generating coarse scale models of highly heterogeneous subsurface formations is developed and applied. The method uses generic global coarse scale simulations to determine the boundary conditions for the local calculation of upscaled properties (permeability or transmissibility). An iteration procedure assures consistency between the local and global calculations. Transport processes are simulated using a subgrid velocity reconstruction technique applied in conjunction with the local–global upscaling procedure. For highly heterogeneous (e.g., channelized) systems, the new method is shown to provide considerably more accurate coarse scale models for flow and transport, relative to reference fine scale results, than do existing local (and extended local) upscaling techniques. The applicability of the upscaled models for different global boundary conditions is also considered.     

Two-phase SPH modelling of waves caused by dam break over a movable bed

This paper describes the application of the Smoothed Particle Hydrodynamics（SPH） method for modeling two dimensional waves caused by dam break over a movable bed in two dimensions.The two phase SPH method is developed to solve the Navier-Stokes equations.Both fluid and sediment phases are described by particles as weakly compressible fluids and the incompressibility is achieved by the equation of state.The sediment phase is modeled as a non-Newtonian fluid using three alternative approaches of artificial viscosity and Bingham Model.In this paper,the new formulations for two-phase flows are proposed.The numerical results obtained from the developed SPH model show acceptable accuracy with comparison to experimental data.     

Tsunami Sediment Characteristics at the Thai Andaman Coast

This paper describes and summarizes the 2004 Indian Ocean tsunami sediment characteristics at the Thai Andaman coast. Field investigations have been made approximately 3 years after the 2004 Indian Ocean tsunami event. Seven transects have been examined at five locations. Sediment samples have been collected for grain-size analyses by wet-sieve method. Tsunami sediments are compared to three deposits from coastal sub-environments. The mean grain-size and standard deviation of deposits show that shoreface deposits are fine to very fine sand, poorly to moderately well sorted; swash zone deposits are coarse to fine sand, poorly to well sorted; berm/dune deposits are medium to fine sand, poorly to well sorted; and tsunami deposits are coarse to very fine sand, poorly to moderately well sorted. A plot of deposit mean grain-size versus sorting indicates that tsunami deposits are composed of shoreface deposits, swash zone deposits and berm/dune deposits as well. The tsunami sediment is a gray sand layer deposited with an erosional base on a pre-existing soil (rooted soil). The thickness of the tsunami sediment layer is variable. The best location for observation of the recent tsunami sediment is at about 50–200 m inland from the coastline. In most cases, the sediment layer is normally graded. In some cases, the sediment contains rip-up clasts of muddy soils and/or organic matter. The vertical variation of tsunami sediment texture shows that the mean grain-size is fining upward and landward. Break points of slope in a plot of standard deviation versus depth mark a break in turbulence associated with a transition to a lower or higher Reynolds number runup. This can be used to evaluate tsunami sediment main layer and tsunami sediment sub layers. The skewness of tsunami sediment indicates a grain size distribution with prominent finer-grain or coarse-grain particles. The kurtosis of tsunami sediment indicates grain-size distributions which are flat to peak distribution (or multi-modal to uni-modal distribution) upward. Generally, the major origins of tsunami sediment are swash zone and berm/dune zone sands where coarse to medium sands are the significant material at these locations. The minor origin of tsunami sediment is the shoreface where the significant materials are fine to very fine sands. However, for a coastal area where the shoreface slope is mild, the major origin of tsunami sediment is the shoreface. The interpretation of runup number from tsunami sediment characteristics gets three runups for the 2004 Indian Ocean tsunami at the Thai Andaman coast. It corresponds to field observations from local eyewitnesses. The 1st runup transported and deposited more coarse particles than the following runups. Overall, the pattern of onshore tsunami sediment transportation indicates erosion at swash zone and berm/dune zone, followed by dynamic equilibrium at an area behind the berm/dune zone and after that deposition at inland zone until the limit of sediment inundation. The total deposition is a major pattern in onshore tsunami sediment transportation at the deposition zone which the sediment must find in the direction of transport.     

A model for grain-size sorting over tidal sand ridges

A model was developed and analyzed to quantify the effect of graded sediment on the formation of tidal sand ridges. Field data reveal coarse (fine) sediment at the crests (in the troughs), but often phase shifts between the mean grain-size distribution and the bottom topography occur. Following earlier work, this study is based on a linear stability analysis of a basic state with respect to small bottom perturbations. The basic state describes an alongshore tidal current on a coastal shelf. Sediment is transported as bed load and dynamic hiding effects are accounted for. A one-layer model for the bed evolution is used and two grain size classes (fine and coarse sand) are considered. Results indicate an increase in growth and migration rates of tidal sand ridges for a bimodal mixture, whilst the wavelength of the ridges remains unchanged. A symmetrical externally forced tidal current results in a grain-size distribution which is in phase with the ridges. Incorporation of an additional external M₄ tidal constituent or a steady current results in a phase shift between the grain-size distribution and ridge topography. These results show a general agreement with observations. The physical mechanism responsible for the observed grain-size distribution over the ridges is also discussed.Responsible Editor: Jens Kappenberg     

Effects of the undecomposed layer and semi-decomposed layer of Quercus variabilis litter on the soil erosion process and the eroded sediment particle size distribution

Simulated rainfall experiments were performed on bare, undecomposed litter layer and semi-decomposed litter layer slopes with litter biomasses of 0, 50, 100 and 150 g m⁻², respectively, to evaluate the effect of the undecomposed layer and semi-decomposed layer of Quercus variabilis litter on the soil erosion process and the particle size distribution of eroded sediment. The undecomposed layer and semi-decomposed layer of litter reduced the runoff rate by 10.91–27.04% and 12.91–36.05%, respectively, and the erosion rate by 13.35–40.98% and 17.16–59.46%, respectively. The percentage of smaller particles (clay and fine silt particles) decreased and the percentage of larger particles (coarse silt and sand particles) increased with an increased rainfall duration on all treated slopes, while the extent of the eroded sediment particle content varied among the treated slopes with the rainfall duration, with bare slopes exhibiting the largest variability, followed by undecomposed litter layer slopes and finally semi-decomposed litter layer slopes. The clay and sand particles were transported as aggregates, and fine silt and coarse silt particles were transported as primary particles. Compared with the original soil, sediment eroded from all treated slopes was mainly enriched in smaller particles. Furthermore, the loss of the smaller particles from the undecomposed litter layer slopes was lower than that from the semi-decomposed litter layer slopes, indicating that the undecomposed litter layer alleviated soil coarsening to some extent. The findings from this study improve our understanding of how litter regulates slope erosion and provide a reference for effectively controlling soil erosion.     

Uniform and graded bed-load sediment transport in a degrading channel with non-equilibrium conditions

Bed-load transport plays a critical role in river morphological change and has an important impact on river ecology.Although there is good understanding of the role of the variation of river bed grain size on transport dynamics in equilibrium conditions,much less is understood for non-equilibrium conditions when the channel is either aggrading or degrading.In particular,the relative role of different grain sizes in the promotion and hindering of the transport of coarse and fine fractions in a degrading channel has yet to be investigated.The current study attempts to provide new understanding through a series of flume experiments done using uniform and graded sediment particles.The experiments revealed coarser grain-size fractions for a poorly-sorted sediment,relative to uniform-sized sediment,reduced the transport of finer grains and finer fractions enhanced the transport of coarse grains.This hinderingpromotion effect,caused by relative hiding and exposure of finer and coarse fractions,increased with bed slope and decreased with relative submergence.In particular,as relative submergence increased,the graded fractions tended towards behaving more like their unifo rm-sized counterparts.Also,the bed-load parameter of the graded fractions increased more with a rise in bed slope than observed for the uniformsized counterparts.These results revealed,for degrading channel conditions,such as downstream of a dam,bed-load equations developed for uniform bed sediment are inappropriate for use in natural river systems,particularly in mountain streams.Furthermore,changes in river bed composition due to activities that enhance the input of hill-slope sediment,such as fire,logging,and agricultural development,are likely to cause significant changes in river morphology.     

Formation of stationary alternate bars in a steep channel with mixed-size sediment: A flume experiment

Alternate bars were formed by sediment transport in a flume with Froude-modelled flow and relative roughness characteristic of gravel-boulder channels with steep slopes. The flume (0.3 m wide × 7.5 m long) was filled with a sand-gravel mixture, which was also fed into the top of the flume at a constant rate under constant discharge. Channel slope was set at 0.03. Initially, coarse particles accumulated on incipient bar heads near one side of the flume and diverted flow and bedload transport across the flume toward a pool scoured against the opposite flume wall downstream. Sorting in the pool directed coarse particles onto the next bar head downstream. Alternate sequences of pools and coarse bar heads were thereby linked down the entire flume by interactions of sediment sorting, flow, and channel morphology. During episodes of bar construction, unsorted bedload invaded interior bar surfaces and was deposited. Persistent deposition of coarse particles on bar heads prevented downstream migration of bars by inhibiting bar-head erosion and bedload transport over bars. Likely factors leading to bar-head stabilization in modelled gravel-bed channels are coarse mixed-size sediment, steep channel gradients, and shallow depths.