SMAP卫星的RBF神经网络海表盐度遥感反演

针对传统海表盐度遥感反演精度不高、影响因素较少等问题,本文基于SMAP（Soil Moisture Active Passive）卫星L2C（Level 2 C）数据、Argo（Array for Real-time Geostrophic Oceanography）数据和其他辅助数据,以太平洋部分海域（160°E～120°W,0°～30°N）为研究区域,综合考虑海面粗糙度以及白冠覆盖率等参量,利用径向基神经网络建立RBF亮温增量模型,并对平静海面亮温进行修正,然后基于Meissner-Wentz介电常数模型得到反演后的盐度值。验证结果表明：模型预测盐度和SMAP卫星盐度相对于Argo实测盐度的均方根误差分别为0.4和0.5,平均绝对误差分别为0.3和0.4。实验证明,利用RBF神经网络建立的亮温增量模型可以提高海表盐度反演的精度,对海表盐度反演具有实用意义。     

基于SMOS卫星数据的BP神经网络盐度反演模型

海表面盐度SSS(Sea Surface Salinity)是研究大洋环流和海洋对气候影响的重要参量、是决定海水基本性质的重要因素之一。卫星微波遥感可以满足盐度研究过程中大范围、连续观测的需要。目前,由欧洲空间局设计开发的SMOS(Soil Moisture and Ocean Salinity)卫星于2009年发射成功,并且根据它的观测数据和物理机制反演出了海表面盐度的相关产品。但结果显示,在某些近海岸区域(如中国南海海域)受陆地RFI等诸多因素的影响,基于卫星遥感物理机制反演得到的盐度产品的精度较低。本文的主要目的是利用中国海洋大学"东方红2"科学考察船的走航数据、SMOS卫星数据,针对中国南海海域提出了用BP神经网络预测海表面盐度的方法,并用实测Argo浮标、WOA13的盐度数据对模型进行适应性评估。结果表明,模型产品相对于"东方红2"实测盐度数据的均方根误差(RMSE)是0.21,而SMOS的SSS1产品、SSS2产品和SSS3产品的精度分别为1.90、1.93和1.91。同时,在验证数据集中,模型预测数据相对于Argo浮标实测盐度数据的均方根误差(RMSE)是0.50,而SMOS的SSS1产品、SSS2产品和SSS3产品的精度分别为1.83、1.83和1.84。此模型具有良好的适应性和泛化能力,为海表面盐度的反演和预测提供了一个不依赖于物理机制的新方法。     

基于Argo的SMAP与SMOS盐度产品质量评估与比对

以2016年SMAP 8日均、月均海表盐度(Sea Surface Salinity, SSS)产品与SMOS日均、月均SSS产品为研究对象,基于Argo浮标实测盐度数据与Argo月均盐度网格产品,进行了质量评估,并开展了SMAP和SMOS盐度遥感产品间的交叉比对。结果表明:SMAP 8日均、月均SSS产品均比SMOS日均、月均SSS产品更接近于Argo盐度数据;SMAP SSS产品在12个月里的标准差均小于SMOS SSS产品,SMAP SSS产品年均偏差与标准差在大部分海域小于SMOS SSS产品,除高纬度地区,4种SSS产品与Argo数据的平均偏差和标准差随纬度变化浮动不大;SMAP 8日均、月均与SMOS日均、月均产品的年平均SSS空间分布特征一致,SMAP 8日均与SMOS日均、SMAP与SMOS月均SSS产品间的年平均偏差在全球范围内总体在-0.50～0.50,标准差总体为0～1.00。     

海表面盐度的统计预测模型

海表面盐度SSS(Sea Surface Salinity)是研究大洋环流和海洋对全球气候影响的重要参量。海表面盐度卫星遥感探测可以满足大范围、连续观测的研究需要,是获取该参量的有效手段。2009年欧洲空间局发射了SMOS(Soil Moisture and Ocean Salinity)卫星,并且根据卫星观测的数据反演出海表面盐度的相关产品,但是产品的精度还有待于进一步的提高。本文利用多元线性回归的统计分析方法,针对SMOS卫星相关数据(观测亮温数据和辅助数据)建立一种全新的不依赖于物理机制的海表面盐度统计模型。本文针对太平洋中部提出的统计模型计算的盐度点对点的精度为0.165 5psu,1°×1°月平均精度为0.106 3psu,而SMOS卫星Level 2盐度产品的精度分别为0.585 5和0.181 9psu。同时将模型应用到验证数据集,得到了点对点精度为0.224 2psu,进一步说明模型具有很好的适应性和泛化能力。     

基于风带的海表面亮温增量统计模型

海表面盐度(Sea Surface Salinity, SSS)是研究大洋环流和海洋对全球气候影响的关键参数之一。目前借助卫星遥感技术获取全天候和连续的SSS是最有效的方法,但是SSS的反演精度在大部分海域达不到预期目标。众所周知,海表面亮温是反演SSS的关键因素之一,海面粗糙度导致了亮温增量的产生,亮温正演模型的误差会影响盐度反演的精度。本文首次提出了依据6个风带划分全球海域,利用Argo实测盐度数据、SMOS卫星数据和相关辅助数据,通过LASSO统计方法在各风带覆盖的海域构建了一个全新的二次曲线亮温增量模型,再通过贝叶斯迭代反演算法计算出了各个海域的SSS产品。与Argo实测SSS对比,新模型下6部分海域反演SSS的绝对平均误差分别为0.76、0.88、0.93、0.92、1.28和1.21,均显著优于修正前(SMOS L2 SSS)产品的误差(0.98、1.61、2.82、1.50、2.35和3.13)。     

基于现场观测资料的卫星海表盐度网格化产品误差分析与质量评估

自欧洲土壤湿度和盐度卫星SMOS和美国宝瓶座盐度卫星Aquarius相继发射之后,多个数据中心发布了两颗卫星的海表盐度网格化产品,其中包括法国海洋研究院SMOS卫星数据小组发布SMOS Locean L3盐度产品、西班牙巴塞罗那专家中心发布SMOS BEC L4盐度产品和美国宇航局喷气动力实验室发布AquariusV3.0 CAP L3盐度产品。本文利用精确盐度现场观测资料从产品精度和模拟海洋现象能力两个方面对以上3种产品质量进行了评估。研究表明:(1) 在精度方面,与盐度现场资料相比,Aquarius CAP 产品质量最高,产品盐度偏差和均方根误差全年稳定且偏差较小,部分海域达到了设计精度;SMOS两种卫星产品在全球海域偏差较不稳定,个别月份出现异常偏差值;SMOS产品在低纬和开阔海域的数据质量相对较高,但在高纬海域仍存在较大误差,需要进一步提升;(2) 在刻画海洋现象方面,Aquarius产品在热带太平洋较好刻画了淡池东缘盐度锋,SMOS BEC产品的刻画能力次之,SMOS Locean产品在热带太平洋充满了小尺度噪音,描述物理现象方面表现偏差。     

海表面盐度的高精度预测模型

为了建立高精度的海洋表面盐度预测模型,采用BP神经网络的方法,针对SMOS卫星level 1C级亮度温度数据和辅助数据建立了一种海表面盐度预测模型,以ARGO浮标观测值作为海表盐度实测值来检验新模型预测结果的准确度,同时利用验证集对模型的精度进行验证.结果表明:通过新模型预测的海表盐度(SSS0)比SMOS卫星的3个粗...     

SMOS卫星盐度数据在中国近岸海域的准确度评估

盐度是描述海洋的关键变量,对海表面盐度进行观测可以推进对全球水循环的理解。本文的主要目的是在中国近海海域对SMOS卫星盐度数据进行准确度评估。主要方法是将SMOS卫星L2海洋盐度数据产品(V317)与实测ARGO数据和走航数据进行匹配,并采用统计学的方法对SMOS卫星数据准确度进行评估。结果表明:匹配数据的线性关系不显著,SMOS卫星盐度数据(V317)在南海和东海的均方根误差分别约为1.2和0.7,应用海表面粗糙度修正模型得到的3组海表盐度数据准确度都相对较低,尤其在近岸强风场区域,海表盐度卫星数据相对于实测数据偏高,这可能是由于海表粗糙度和陆地射频干扰(RFI)作用影响的结果;SMOS卫星数据在东海的均方根误差比南海高0.5左右,这可能是由于东海海域为相对开阔海域,受陆地RFI影响相对南海较小;在中国近岸海域,应用SSS1和SSS3模型得到的盐度数据准确度相对较高,可以对模型进行地球物理参数修正,进行局地化改进,预计可以提高近岸海域盐度反演的准确度。     

基于SMOS卫星数据的海表面盐度模型

海表面盐度是研究海洋对全球气候影响以及大洋环流的重要参量之一,而卫星遥感技术是获取海表面盐度数据的最有效方法.目前,L波段的SMOS和Aquarius/SAC-D遥感卫星正在用于探测海表面盐度,并根据卫星观测数据和物理机制反演出海表面盐度的产品.但在某些近陆地区域,由于淡水流入及陆地射频(RFI)等因素影响,卫星反演盐度的产品精度较低.文中利用“东方红2号”科学考察船的实测数据、SMOS卫星数据,首次针对中国南海海域提出了用贝叶斯网络模型计算海表面盐度,并用验证数据集(实测Argo盐度)对模型进行适应性评估.经过计算,模型误差和验证误差分别为0.47 psu和0.45 psu,而相应的SMOS Level 2产品的精度分别为1.90 psu和1.82 psu.此模型为海表面盐度的计算提供了一个新方法.     

基于ConvGRU和自注意力的海表温度偏差订正研究

海表温度（Sea Surface Temperature, SST） 是一个重要的海洋物理量, 其准确预报对于水产养殖和预测海洋环境信息等海洋相关领域的研究至关重要。数值预报是目前预报海表温度的一种常用方法, 但数值预报模型所产生的预报结果往往与实际观测数据有偏差, 因此有必要对数值预报产品的偏差进行订正。本文提出了一种结合ConvGRU 神经网络与自注意力（Self-Attention, SA） 的新型时空混合海表温度订正模型（ConvGRU-SA）, 对南海海表温度预报数据进行偏差订正, 该模型适用于利用卫星遥感数据对海表温度数值预报产品进行订正。经与ConvLSTM、ConvGRU 等网络模型对比, 证明了ConvGRU-SA 模型的优越性, 设置不同的超参 数进行实验, 提高模型订正准确率。订正后该区域的海表温度预报均方根误差从0.52 ℃降低至0.32 ℃, 准确率提高了38.4%, 优于现有模型。     

Microbial Biomass and Organic Nutrients in the Deep-Sea Sediments of the Central Indian Ocean Basin

In order to assess the impact of deep-sea mining on the in situ benthic life, we measured the microbial standing stock and concentration of organic nutrients in the deep-sea sediments of the Central Indian Ocean Basin in the Indian pioneer area. Sediments were collected using box core and grab samples during September 1996. The total bacterial numbers ranged from 10 10 -10 11 cells per g -1 dry weight sediment. There was a marginal decrease in the number of bacteria from surface to 30 cm depth, though the subsurface section registered a higher number than did the surface. The highest numbers were encountered at depths of 4-8 cm. The retrievable number of bacteria were two orders less in comparison with the direct total counts of bacteria. An almost homogeneous distribution of bacteria, total organic carbon, living biomass, and lipids throughout the depth of cores indicates active microbial and benthic processes in the deep sea sediments. On the other hand, a uniform distribution of total counts of bacteria, carbohydrates, and total organic carbon in all the cores indicates their stable nature and suggests that they can serve as useful parameters for long-term monitoring of the area after the benthic disturbance. Further studies on temporal variability in this region would not only verify the observed norms of distribution of these variables but would also help to understand restabilization processes after the simulated benthic disturbance.     

Assessing the Validity of Seismo-Acoustic Predictor Equations for Obtaining Seabed and Sub-Surface Sediment Physical Properties

The interdependence between the seismo-acoustic properties of a marine sediment and its geotechnical/physical parameters has been known for many years, and it has been postulated that this should allow the extraction of geotechnical information from seismic data. Though in the literature many correlations have been published for the surficial layer, there is a lack of information for greater sediment depths. In this article, a desktop study on a synthetic seafloor model illustrates how the application of published near-surface prediction equations to subsurface sediments (up to several tens of meters burial depth) can lead to spurious predictions. To test this further, acoustic and geotechnical properties were measured on a number of sediment core samples, some of which were subjected to loading in acoustically-equipped consolidation cells (oedometers) to simulate greater burial depth conditions. For low effective pressures (representing small burial depths extending to around 10 meters subsurface), the general applicability of established relationships was confirmed: the prediction of porosity, bulk density, and mean grain size from acoustic velocity and impedance appears generally possible for the investigated sedimentary environments. As effective pressure increases through, the observed relationships deviate more and more from the established ones for the near-surface area. For the samples tested in this study, in some instances increasing pressure even resulted in decreasing velocities. There are several possible explanations for this abnormal behavior, including the presence of gas, overconsolidation, or bimodal grain size distribution. The results indicate that an appropriate depth correction must be introduced into the published prediction equations in order to obtain reliable estimates of physical sediment properties for greater subsurface depths.     

海上大直径钢管桩打桩过程中桩周土强度弱化研究

海上大直径钢管桩打桩过程中,桩周土体受到强烈扰动而发生强度弱化,掌握桩周土体强度弱化规律对于准确预测打桩过程、保证工程安全具有重要意义。为研究土体强度弱化规律,开展了环剪试验模拟打桩对桩周土体的扰动,测试土体强度随剪切速率的变化规律,建立了描述土体强度弱化规律的拟合公式,引入到打桩分析软件中。研究结果表明：土体的强度折减程度不仅与土体本身的性质有关还受到土体的埋深和剪切速率的影响,埋深越深土体强度折减程度越低,剪切速率越高土体强度折减越高,在打桩分析中可采用这里推荐的线性折减方法来模拟不同深度处土体强度的折减规律。     

Geoacoustic Inversion via Genetic Algorithm and Its Application to Manganese Sediment Identification

An acoustic inversion method using a wide-band signal and two near field receivers is proposed and applied to multiple layered seabed models including a manganese sediment. The inversion problem can be formulated into a probabilistic model comprised of signals, a forward model, and additive noise. The forward model simulates wide-band signals, such as chirp signals, and is chosen to be the source-waveletconvolution plane wave modeling method. The wavelet matching technique, using weighted least-squares fitting, estimates the sediment sound-speed and thickness on which determination of the possible numerical ranges for a priori uniform distribution is based. The genetic algorithm is applied to a global optimization problem to find a maximum a posteriori solution for determined a priori search space. Here the object function is defined by an L 2 norm of the difference between measured and modeled signals. Not only the marginal pdf but also its statistics are calculated by numerical evaluation of integrals using the samples selected during importance sampling process of the genetic algorithm.     

Interannual Sea Level Variations and Annual Tides in the Northwestern Pacific

Specific properties of the interannual sea level variations and annual tides in the Northwestern Pacific were studied. Several tide stations were monitored. The monthly mean sea level for the year of 1995 was analyzed at each tide station. A seismic event in 1995, some tectonic activity around the subject area, and the Kuroshio (the oceanic western boundary current) may possibly contaminate results which would have occurred from the astronomical annual tide alone.     

Deep-Sea Sediment Compression Curves: Some Controlling Factors, Spurious Overconsolidation, Predictions, and Geophysical Reproduction

Oedometer tests have been carried out on 70 undisturbed surficial clays (at approximately 250 mm below the mudline), mostly collected by free-fall corers from sites widely scattered throughout the deep-sea North Atlantic. Acoustic measurements were also made, initially on contiguous samples and ultimately on the same sample using a geophysically instrumented oedometer which also collected electrical resistivity data. Apart from those quiescent areas below the carbonate compensation depth, such as north of the West Indies where very fine clays exist, most of the samples are silty clays whose geotechnical-geophysical properties are dependent on the type of clay minerals present (and their ability to take in moisture), the sand-size fraction, and the quantity of carbonate present. Thus the pure clays have high compressibilities which decrease on the addition of coarse particles, while the converse is true for the acoustic parameters, these increasing with the sand fraction. Using the notion of the intrinsic compression line for all samples, and comparison to it of the measured compression curves, it is clear that, contrary to some previously held ideas, most deep-sea clays are normally consolidated; the addition of carbonate has the effect of creating an open, stronger sediment skeleton. Interestingly, where information is available, the variation with depth of a sample's acoustic velocity follows the void ratio pressure relationship of the compression curve. This allows the construction of an in-situ sediment compression curve using the in-situ geophysical observations.     

Phylogenetic diversity and phenotypic characterization of cultivable bacterioplankton isolated from polar oceans

A set of 27 marine planktonic bacteria isolated from the polar regions was characterized by 16S rDNA sequencing and physiological and biochemical testing. More than half of these bacteria were positive for caseinase, gelatinase and 13-glucosidase, and could utilize glucose, maltose or malic acid as carbon source for cell growth. Twelve isolates expressed nitrate reduction activities. Except for one antarctic isolate BSwlO175 belonging to Actinobacteria phylum, these isolates were classified as γ-Proteobacteria, suggesting that γ-Proteobacteria dominated in cultivable marine bacterioplankton at both poles. Genus Pseudoalteromonas was the predominant group in the Chukchi Sea and the Bering Sea, and genus ShewaneUa dominated in cultivable bacterioplankton in the Prydz Bay. With sequence similarities above 97%, genus Psychrobacter was found at both poles. These 27 isolates were psychrotolerant, and significant 16S rDNA sequence similarities were found not only between arctic and antarctic marine bacteria （ 〉 99% ）, but also between polar marine bacteria and bacteria from other aquatic environments （ ≥ 98.8% ）, including temperate ocean, deep sea, pond and lake, suggesting that in the polar oceans less temperature-sensitive bacteria may be cosmopolitan and have a bipolar, even global, distribution at the species level.     

Flow Cytometric Analysis of Coastal Lagoon Bacterioplankton and Picophytoplankton: Fixation and Storage Effects

The effect of different fixation and storage protocols on the flow cytometric (FCM) simultaneous analysis of bacterioplankton and phytoplankton in coastal seawater samples (Mediterranean coastal lagoons) was investigated. FCM measurements (cell number, fluorescence and scatter characteristics) were obtained through DAPI staining. Three fixatives [glutaraldehyde (GA), formaldehyde (FA) and paraformaldehyde (PFA)] and two storage (3 months duration) methods (5 °C and −196 °C) were tested. Two dominant populations were detected in studied samples: bacteria and eukaryotic picophytoplankton. Adding fixatives (2% final concentration) appears necessary to obtain FCM exhaustive counts of all the bacteria and phytoplanktonic cells. This was related to the permeation effect of fixatives which allowed a better DAPI staining of the cells. Maximum fluorescence, i.e. optimal staining of the cells was obtained with FA or PFA, and significant lower fluorescences with GA. Fixed samples stored at 5 °C induced rapid cell loss. Only storage in liquid nitrogen of samples fixed with FA or PFA, allows mid-term (≥4 months) preservation of bacteria or picophytoplankton cell numbers, and limited evolution of DAPI-induced fluorescence and scatter characteristics.