Effect of frequency-dependent radiation pattern in the strong motion simulation of the 2011 Tohoku earthquake,Japan, using modified semi-empirical method

We perform a strong ground motion simulation using a modified semi-empirical technique (Midorikawa in Tectonophysics 218:287–295, 1993), with frequency-dependent radiation pattern model. Joshi et al. (Nat Hazards 71:587–609, 2014) have modified the semi-empirical technique to incorporate the modeling of strong motion generation areas (SMGAs). A frequency-dependent radiation pattern model is applied to simulate high-frequency ground motion more precisely. Identified SMGAs (Kurahashi and Irikura in Earth Planets Space 63:571–576, 2011) of the 2011 off the Pacific coast of Tohoku earthquake (M _w  = 9.0) were modeled using this modified technique. We analyzed the effect of changing seismic moment values of SMGAs on the simulated acceleration time series. Final selection of the moment values of SMGAs is based on the root-mean-square error (RMSE) of waveform comparison. Records are simulated for both frequency-dependent and constant radiation pattern function. Simulated records for both cases are compared with observed records in terms of peak ground acceleration, peak ground velocity and pseudo-acceleration response spectra at different stations. Comparison of simulated and observed records in terms of RMSE suggests that the method is capable of simulating record, which matches in a wide frequency range for this earthquake and bears realistic appearance in terms of shape and strong motion parameters. The results confirm the efficacy and suitability of rupture model defined by five SMGAs for the developed modified technique.     

Near-field and far-field simulation of accelerograms of Sikkim earthquake of September 18, 2011 using modified semi-empirical approach

The semi-empirical approach for modeling of strong ground motion given by Midorikawa (Tectonophysics 218:287?C295, 1993) has been modified in the present paper for component wise simulation of strong ground motion. The modified approach uses seismic moment in place of attenuation relation for scaling of acceleration envelope. Various strong motion properties like directivity effect and dependence of peak ground acceleration with respect to surface projection of source model have been studied in detail in the present work. Recently, Sikkim earthquake of magnitude 6.9 (M _w ) that occurred on September 18, 2011 has been recorded at various near-field and far-field strong motion stations. The modified semi-empirical technique has been used to confirm the location and parameters of rupture responsible for this earthquake. Strong motion record obtained from the iterative modeling of the rupture plane has been compared with available strong motion records from near as well as far-field stations in terms of root mean square error between observed and simulated records. Several possibilities of nucleation point, rupture velocity, and dip of rupture plane have been considered in the present work and records have been simulated at near-field stations. Final selection of model parameters is based on root mean square error of waveform comparison. Final model confirms southward propagating rupture. Simulations at three near-field and twelve far-field stations have been made using final model. Comparison of simulated and observed record has been made in terms of peak ground acceleration and response spectra at 5?% damping. Comparison of simulated and observed record suggests that the method is capable of simulating record which bears realistic appearance in terms of shape and strong motion parameters. Present work shows that this technique gives records which matches in a wide frequency range for Sikkim earthquake and that too from simple and easily accessible parameters of the rupture plane.     

Modeling of strong motion generation area of the Uttarkashi earthquake using modified semiempirical approach

The semiempirical approach based on envelope summation method given by Midorikawa (Tectonophysics 218:287–295, 1993) has been modified in this paper for modeling of strong motion generation areas (SMGAs). Horizontal components of strong ground motion have been simulated using modifications in the semiempirical approach given by Joshi et al. (Nat Hazard 71:587–609, 2014). Various modifications in the technique account for finite rupture source, layering of earth, componentwise division of energy and frequency-dependent radiation pattern. In this paper, SMGAs of the Uttarkashi earthquake have been modeled. Two different isolated wave packets in the recorded accelerogram have been identified from recorded ground motion, which accounts for two different SMGAs in the entire rupture plane. The approximate locations of SMGAs within the rupture plane were estimated using spatio-temporal variation of 77 aftershocks. Source parameters of each SMGA were calculated from theoretical and observed source displacement spectra computed from two different wave packets in the record. The final model of rupture plane responsible for the Uttarkashi earthquake consists of two SMGAs, and the same has been used to simulate horizontal components of acceleration records at different station using modified semiempirical technique. Comparison of the observed and simulated acceleration records in terms of root mean square error confirms the suitability of the final source model for the Uttarkashi earthquake.     

Estimation of model parameter of Sumatra earthquake using empirical Green’s function technique and generation of hypothetical earthquake scenario for Andaman Island, India

Empirical Green??s function (EGF) technique is considered to be most effective technique for simulation of ground motions due to a finite earthquake source. In the present paper, this technique has been used to simulate ground motion due to a great earthquake. The coastal region of Sumatra Island has been visited by a great earthquake on December 26, 2004. This earthquake has been recorded at several broadband stations including a nearest broadband station PSI in Indonesia. The shear wave contributions in both horizontal components have been simulated at PSI station using EGF technique. The comparison of simulated and observed waveform has been made for various possibilities of rupture parameters in terms of root mean square error. The final rupture model supports rupture velocity of 3.0?km/s with nucleation point supporting northward propagating rupture that coincide with high-slip asperity defined by Sorensen et al. (Bull Seism Soc Am 97:S139?CS151, 2007). The final modeling parameters have been used to simulate record at MDRS station in coastal state of Tamilnadu, India. In an attempt to model a scenario of great earthquake in the Andaman Island, a hypothetical rupture plane is modeled in this region. The event occurred on August 10, 2008 of magnitude 6.2 (M _w ) recorded on strong motion array at Port Blair has been used as EGF to simulate records due to the hypothetical great earthquake. Possibilities of earthquake due to the oblique strike-slip and thrust mechanism have been modeled in the present paper. Several possibilities of nucleation point for both cases has been considered, and it is seen that variation of peak ground acceleration at Port Blair station for strike-slip and thrust mechanism is 126?C738 gals and 647?C2,571 gals, respectively, which indicate high seismic hazard potential of Andaman Island.     

Use of site amplification and anelastic attenuation for the determination of source parameters of the Sikkim earthquake of September 18, 2011, using far-field strong-motion data

An earthquake of magnitude 6.9 (M _w) occurred in the Sikkim region of India on September 18, 2011. This earthquake is recorded on strong-motion network in Uttarakhand Himalaya located about 900 km away from the epicenter of this earthquake. In this paper acceleration record from six far-field stations has been used to compute the source parameters of this earthquake. The acceleration spectra of ground motion at these far-field stations are strongly affected by both local site effects and near-site anelastic attenuation. In the present work the spectrum of S-phase recorded at these far-field stations has been corrected for anelastic attenuation at both source and site and the site amplification terms. Site amplifications at different stations and near-site shear wave attenuation factor have been computed by the technique of inversion of acceleration spectra given by Joshi et al. (Pure Appl Geophys 169:1821–1845, 2012a). For estimation of site amplification and shear wave quality factor [Q _β (f)] at the recording sites, ten local events recorded at various stations between July 2011 and December 2011 have been used. The obtained source spectrum from acceleration records is compared with the theoretical source spectrum defined by Brune (J Geophys Res 76:5002, 1970) at each station for both horizontal components of the records. Iterative forward modeling of theoretical source spectrum gives the average estimate of seismic moment (M _o), source radius (r _o) and stress drop (Δσ) as (3.2 ± 0.8) × 10²⁶ dyne cm, 13.3 ± 0.8 km and 59.2 ± 8.8 bars, respectively, for the Sikkim earthquake of September 18, 2011.     

Ground motion estimation during the Kashmir earthquake of 8th October 2005

In this article, analytical methods have been used to estimate ground motion during the 8 October 2005, Kashmir earthquake. Peak ground acceleration (PGA) values at several stations in the epicentral region have been estimated by empirical analytical source mechanism models. As an alternate analysis, PGA estimates have also been obtained using the stochastic finite fault seismological model. The estimated PGAs are compared with that obtained from damage values. A PGA contour map in the near-source region is provided. It is found that very near to the epicenter, PGA would have reached more than 1 g. It is demonstrated that empirical analytical models can be effectively used to estimate ground motion due to rupture of active faults.     

Strong ground motion modelling of causative fault for the 2002 Avaj earthquake, Iran

The suitability of a very fast method for obtaining synthesizing accelerograms has been demonstrated for a hybrid simulation technique of source wavelet and acceleration envelope waveform for the 2002 Avaj earthquake. This method is based on the amplitude modeled white noise and envelope waveform. The estimation of peak acceleration from a preliminary simulated record is based on using modeling parameters of rupture plane instead of empirical relations for peak acceleration. Based on comparison between observed and simulated strong ground motion data, a fair agreement is observed between simulated and observed records up to distances 40 km for peak acceleration and duration. The most important feature of the recorded strong motion is decay up to a distance of 40 km which is due to direct upgoing shear waves. At distance of 50 to 60 km peak acceleration increase, which is due to postcritical reflection from velocity gradient in the lower crust. A flat trend is observed for peak acceleration at distance of 60 to 100 km. The simulation indicates that the rupture is started at depth of 8 km and propagated from northwest to southeast. The causative fault for the 2002 Avaj earthquake shows similar mechanism to the 1962 Buin-Zahra earthquake.     

Source parameters estimation of 2003 Bam earthquake Mw 6.5 using empirical Green’s function method,based on an evolutionary approach

We determine the source parameters for 2003 (Mw 6.5) Bam, Iran, earthquake using an empirical Green’s function summation approach to model ground motions recorded by two strong motion stations at approximately 45 km epicentral distance. We introduce a genetic algorithm technique to optimize the fit to observed elastic response spectra. The proposed genetic algorithm technique allows us to explore the sensitivity of the results to multiple source parameters, including hypocenter location, focal mechanism (Strike and Dip), P-wave velocity in depth, fault dimension and rupture and healing velocities.     

汶川M_s 8.0级地震强震记录所揭示的地震断层特征分析

基于2008年5月12日汶川Ms8.0级地震的强震台站记录,对比发震断层两侧的峰值加速度与地表破裂带上同震位移的分布特点,探讨了地震动强度分布特征与地表破裂位移分布之间的相关关系。分析近断层典型台站的强震动记录时程特征,获得了强地震动记录中所包含的断层破裂过程和破裂习性信息,从强震观测记录的角度进一步证实了汶川地震主震的多次破裂特征。结果表明,汶川地震主震至少包含了4次地震破裂事件,最主要的前两次破裂事件分别对应映秀—北川断裂段和北川—南坝断裂段的破裂过程,后两次破裂事件释放的能量相对较小,应该是第二次破裂过程触发局部次级破裂所引起的。此外,垂直于断层的峰值加速度剖面揭示的发震断层的高倾角逆冲特性,与地震地质调查和小震精定位等确定的相应结果是一致的。     

Near-fault strong motion complexity of the 2000 Tottori earthquake (Japan) from a broadband source asperity model

The October 6/2000 Tottori earthquake that occurred in central Japan was an intermediate size strike-slip event that produced a very large number of near field strong motion recordings. The large amount of recorded data provides a unique opportunity for investigating a source asperity model of the Tottori earthquake that, combined with a hybrid strong motion simulation technique, is able to reproduce the observed broadband frequency near-fault ground motion.

We investigated the optimum source asperity parameters of the Tottori earthquake, by applying a Genetic Algorithm (GA) inversion scheme to optimise the fitting between simulated and observed response spectra and Peak Ground Acceleration (PGA) values. We constrained the initial model of our inversion by using the heterogeneous slip distribution obtained from a kinematic inversion of the source of previous studies. We used all the observed near-fault ground motions (−100 m) from the borehole strong motion network of Japan (KiK-Net), which are little affected by surficial geology (site effects).

The calculation of broadband frequency strong ground motion (0.1–10 Hz) is achieved by applying a hybrid technique that combines a deterministic simulation of the wave propagation for the low frequencies and a semi-stochastic modelling approach for the high frequencies. For the simulation of the high frequencies, we introduce a frequency-dependent radiation pattern model that efficiently removes the dependence of the pattern coefficient on the azimuth and take-off angle as the frequency increases. The good agreement between the observed and simulated broadband ground motions shows that our inversion procedure is successful in estimating the optimum asperity parameters of the Tottori earthquake and provides a good test for the strong ground motion simulation technique.

The ratio of background stress drop to average asperity stress drop from our inversion is nearly 50%, in agreement with the theoretical asperity model of Das and Kostrov [Das, S., Kostrov, B.V., 1986. Fracture of a single asperity on a finite fault: a model for weak earthquakes? Earthquake Source Mechanics, AGU, pp. 91–96.], and an empirical ratio of asperities to rupture area [Seismol. Res. Lett. 70 (1999) 59–80.].

The simulated radiation pattern is very complex for epicentral distances within half the fault length, but it approaches the radiation of a double-couple point source for larger distances.

The rupture velocity and rise time have a significant influence on the Peak Ground Velocity (PGV) distribution around the fault. An increase in rupture velocity produces a similar effect on the ground motion as a reduction in rise time.     

Near-source strong motion database catalog for Iran

This paper discusses a newly developed high-quality integrated dataset of shallow earthquake ground motions that occurred in Iran, from 1976 to 2013. A total of 860 three-component strong motion records are processed from 183 earthquake events, moment magnitudes 5.0?≤?M _w ?≤?7.4, and rupture distances of R _RUP  ≤ 120 km. Strong motion data from Iran having special tectonic features and shallow earthquakes with depths less than 35 km are included. This paper presents a thorough procedure used to collect and to generate a database following the Next-Generation Attenuation-West research projects. This database can be used in the development and ranking of ground motion models and for seismological and engineering hazard and risk analyses. Unprocessed strong motion records are obtained from the Iranian Strong Motion Network (ISMN). The time series collected were thoroughly examined through several rounds of quality reviews. The newly generated database includes the peak ground acceleration, peak ground velocity, and pseudo-spectral acceleration for the 5% damped with periods ranging from 0.01 to 10 s. The database also includes ground motion information and source characterization and parameters. This study is the near-source compiled ground motion database that can be used for Iran, and it is consistent with standard worldwide databases.     

基于包络的汶川大地震高频地震波辐射区域反演及近场加速度合成

合理地估计汶川破坏区域的地震动有助于地震灾害的研究.通过利用芦山地震记录建立的加速度包络衰减关系和汶川地震近场30个台站的加速度包络,基于线源模型,采用差分进化方法反演了汶川地震断层面上高频 (＞1 Hz) 辐射区域分布.结果表明:断层面上高频辐射分布很不均匀,辐射较强的区域主要位于:(1) 产生较大地表破裂的映秀、北川和南坝区域;(2) 映秀和北川等凹凸体的周边区域,包括震中东北侧60~90 km区域、北川和南坝东北侧30 km处;(3) 断层破裂停止的东北端约30 km长的区域.其中,破裂贯穿到地表的映秀、北川和南坝是低频和高频辐射都很强的区域.对于无观测记录场点,选择其临近且场地条件类似的台站加速度提取平稳随机过程,结合高频辐射分布和衰减关系得到的包络,合成了加速度时程,可为汶川地震结构震害分析提供地震动输入.      

Site-Specific Analysis of Strong Motion Data from the September 7, 1999 Athens,Greece Earthquake

The strong ground motion from Athens, Greece 07/09/1999 earthquake has been recorded by eighteen (18) stations, fourteen (14) within the central Athens area and four (4) at the centers of nearby towns. The ground conditions for most of the recording sites were identified, based on previous geotechnical investigations carried out in the wider area of the sites, and consequently correlated to the seismic motion characteristics. Hence, it has been possible to evaluate the accuracy of different seismological methods for site characterization and also estimate soil effects on peak ground acceleration and elastic response spectra. In addition, preliminary estimates are drawn for the seismic motion characteristics at the epicentral area, where no strong motion recordings are available. The detailed soil profiles at the recordingsites are placed in the Appendix.     

Hybrid attenuation model for estimation of peak ground accelerations in the Kutch region, India

The Kutch region of Gujarat in India is the locale of one of the most devastating earthquake of magnitude (M _w) 7.7, which occurred on January 26, 2001. Though, the region is considered as seismically active region, very few strong motion records are available in this region. First part of this paper uses available data of strong motion earthquakes recorded in this region between 2006 and 2008 years to prepare attenuation relation. The developed attenuation relation is further used to prepare synthetic strong motion records of large magnitude earthquakes using semiempirical simulation technique. Semiempirical simulation technique uses attenuation relation to simulate strong ground motion records of any target earthquake. The database of peak ground acceleration obtained from simulated records is used together with database of peak ground acceleration obtained from observed record to develop following hybrid attenuation model of wide applicability in the Kutch region: $$ \begin{aligned} \ln \left( {\text{PGA}} \right) & = - 2.56 + 1.17 \, M_{\text{w}} - \, 0.015R - 0.0001\ln \left( {E + 15} \right) \\ &\quad 3.0 \le M_{\text{w}} \le 8.2;\quad 12 \le R \le 120;\quad {\text{std}} . {\text{ dev}}.(\sigma ): \pm 0.5 \\ \end{aligned} $$ ln ( PGA ) = ? 2.56 + 1.17 M w ? 0.015 R ? 0.0001 ln ( E + 15 ) 3.0 ≤ M w ≤ 8.2 ; 12 ≤ R ≤ 120 ; std . dev . ( σ ) : ± 0.5 In the above equation, PGA is maximum horizontal ground acceleration in gal, M _w is moment magnitude of earthquake, R is hypocentral distance, and E is epicentral distance in km. The standard deviation of residual of error in this relation is 0.5. This relation is compared with other available relations in this region, and it is seen that developed relation gives minimum root mean square error in comparison with observed and calculated peak ground acceleration from same data set. The applicability of developed relation is further checked by testing it with the observed peak ground acceleration from earthquakes of magnitude (M _w), 3.6, 4.0, 4.4, and 7.7, respectively, which are not included in the database used for regression analysis. The comparison demonstrates the efficacy of developed hybrid attenuation model for calculating peak ground acceleration values in the Kutch region.     

Ground motion estimation at Guwahati city for an Mw 8.1 earthquake in the Shillong plateau

In this paper, the ground motion at Guwahati city for an 8.1 magnitude earthquake on Oldham fault in the Shillong plateau has been estimated by stochastic finite-fault simulation method. The corresponding acceleration time histories on rock level at several sites in the epicentral region have been computed. These results are validated by comparing them with the estimates obtained from Medvedev–Sponheuer–Karnik (MSK) intensity observations of 1897 Shillong earthquake. Using the local soil parameters, the simulated rock level acceleration time history at Guwahati city is further amplified up to the ground surface by nonlinear site response analysis. The results obtained are presented in the form of peak ground acceleration (PGA) contour map. The maximum amplification for PGA over Guwahati city is as high as 2.5. Based on the simulated PGA, the liquefaction susceptibility at several locations in the city has been estimated. The results are presented in the form of contours of factor of safety against liquefaction at different depths below the ground surface. It is observed that over a large part of the Guwahati city, the factor of safety against liquefaction is less than one, indicating that the city is highly vulnerable to liquefaction in the event of this earthquake. The contour maps obtained can be used in identifying vulnerable areas and disaster mitigation.     

Strong ground motion estimation in the Sea of Marmara region (Turkey) based on a scenario earthquake

We perform a broadband frequency bedrock strong ground motion simulation in the Marmara Sea region (Turkey), based on several fault rupture scenarios and a source asperity model. The technique combines a deterministic simulation of seismic wave propagation at low frequencies with a semi-stochastic procedure for the high frequencies. To model the high frequencies, we applied a frequency-dependent radiation pattern model, which efficiently removes the effective dependence of the pattern coefficient on the azimuth and take-off angle as the frequency increases. The earthquake scenarios considered consist of the rupture of the closest segments of the North Anatolian Fault System to the city of Istanbul. Our scenario earthquakes involve the rupture of the entire North Anatolian Fault beneath the Sea of Marmara, namely the combined rupture of the Central Marmara Fault and North Boundary Fault segments. We defined three fault rupture scenarios based on the location of the hypocenter, selecting a preferred hypocentral location near a fault bend for each case. We analysed the effect of location of the asperity, within the Central Marmara Fault, on the subsequent ground motion, as well as the influence of anelasticity on the high-frequency attenuation characteristics. The fault and asperity parameters for each scenario were determined from empirical scalings and from results of kinematic and dynamic models of fault rupture. We calculated the resulting time series and spectra for ground motion at Istanbul and evaluated the sensitivity of the predictions to choice of model parameters. The location of the hypocenter is thus shown to be a critical parameter for determining the worst scenario earthquake at Istanbul. We also found that anelasticity has a significant effect on the regional attenuation of peak ground accelerations. Our simulated ground motions result in large values of acceleration response spectra at long periods, which could be critical for building damage at Istanbul during an actual earthquake.     

Strong ground motion attenuation in Aswan area, Egypt

Recent and paleo seismicity indicate that moderate seismic activity is relatively large for Aswan area. This is a warning on the possibility of occurrence of earthquakes in the future too. No strong motion records are available in Aswan area for engineers to rely upon. Consequently, the seismological modeling is an alternative approach till sufficient instrumental records around Aswan become available. In the present study, we have developed new ground motion attenuation relationship for events spanning 4.0?≤? M _w?≤?7.0 and distance to the surface projection of the fault up to 100 km for Aswan based on a statistically simulated seismological model. We generated suites of ground motion time histories using stochastic technique. The ground motion attenuation relation describes the dependence of the strength of the ground motions on the earthquake magnitude and distance from the earthquake. The proposed equation for peak ground acceleration (PGA) for the bed rock is in the form of: $ {\mathbf{log}}{\text{ }}\left( {{\mathbf{PGA}}/{\mathbf{gal}}} \right){\text{ }} = {\mathbf{1}}.{\mathbf{24}} + {\mathbf{0}}.{\mathbf{358}}{M_{\mathbf{w}}} - {\text{ }}{\mathbf{log}}\left( {\mathbf{R}} \right){\text{ }}-{\text{ }}{\mathbf{0}}.{\mathbf{008}}{\text{ }}{\mathbf{R}}{\text{ }} + {\text{ }}{\mathbf{0}}.{\mathbf{22}}{\text{ }}{\mathbf{P}} $ . Where PGA is the peak ground acceleration in gal (cm/s²); M_w, its moment magnitude; R is the closest distance between the rupture projection and the site of interest; and the factor P is a dummy variable. It is observed that attenuation of strong motion in Aswan is correlated with those used before in Egypt.     

Strong ground motion during the largest aftershock (Mw=5.8) of the 1999 Izmit earthquake, Turkey

We present a preliminary study of strong ground motion during the largest aftershock (M_w 5.8) of the 1999 Izmit earthquake (M_w 7.4), Turkey, at 11:55 on 13 September 1999. The peak ground acceleration observed near the epicentre of this aftershock was in agreement with that predicted by standard empirical prediction equations. Its spectral source parameters of the largest aftershock are also typical for a M_w 5.8 earthquake. At greater epicentral distances, there is an order-of-magnitude in scatter in peak ground acceleration values for this aftershock, which is attributed to site effects. The presence of thick layers of low-velocity sediments caused significant amplification of S-waves in the Avcılar district of Istanbul, at frequencies of 1 Hz, explaining the observed concentration of damage there as a result of the Izmit mainshock.     

Generation of stochastic earthquake ground motion in western Saudi Arabia as a first step in development of regional ground motion prediction model

Earthquake ground motion model is an essential part of seismic hazard assessment. The model consists in several empirical ground motion prediction equations (GMPEs) that are considered to be applicable to the given region. When the recorded ground motion data are scarce, numerical modeling of ground motion based on available seismological information is widely used. We describe results of stochastic simulation of ground motion acceleration records for western Saudi Arabia. The simulation was performed using the finite fault model and considering peak ground acceleration and amplitudes of spectral acceleration at natural frequencies 0.2 and 1.0 s. Based on the parameters of the input seismological model that were accepted in similar previous studies, we analyze influence of variations in the source factor (stress drop) and in the local attenuation and amplification factors (kappa value, crustal amplification). These characteristics of the model are considered as the major contributors to the ground motion variability. The results of our work show that distribution of simulated ground motion parameters versus magnitude and distance reveals an agreement with the GMPEs recently used in seismic hazard assessment for the region. Collection of credible information about seismic source, propagation path, and site attenuation parameters using the regional ground motion database would allow constraining the seismological model and developing regional GMPEs. The stochastic simulation based on regional seismological model may be applied for generation of ground motion time histories used for development of analytical fragility curves for typical constructions in the region.     

The earthquake of March 4, 1977, its recording peculiarities and source parameters

A detailed analysis of recording peculiarities at seismic stations of the Uniform System of Seismic Observations (USSO) is presented a complicated nature of the source being shown. Consideration is given to parameters of the earthquake source, including the seismic moment and the length of the rupture.Comparison of magnitudes M_LH and M_PV indicates an anomalous attenuation in surface waves, itis is 3–4 times weaker than it had been noticed in case of other intermediate-depth Carpathian earthquakes.On the basis of comparison of the logarithm of the ratio of P-wave spectra at different epicentral distances (30° –70° ), the fac tor characterizing the absorption of P wave is found to remain practically unchanged.Average value of the seismic moment is estimated to be 2.6 × 10²⁷ dyne × cm, the most reasonable length of the rupture 58 km, and its focus 100 –130 km. The source parameters of the earthquake in question are compared with those of the earthquake of November 10, 1940.