一种起伏板防波堤最优支撑刚度计算方法

带有弹簧支撑的水平板结构,可在波浪作用下起伏运动进行消浪,作为防波堤具有广泛的应用前景,但如何设计支撑刚度仍是当前研究的重点课题。基于黏性流理论建立数值波浪水槽,开展规则波与起伏板防波堤相互作用的模拟,得到起伏板透反射系数随支撑刚度的变化曲线,并分析最小透射系数对应刚度下起伏板运动相位对消浪的影响。为快速得到最小透射系数对应的支撑刚度,根据弹簧—阻尼—质量模型,建立一种以运动相位为输入反推起伏板最优支撑刚度的计算方法,并将推导结果与数值结果进行比较。结果表明,该方法推导的最优支撑刚度值与数值最优值接近,且可省去遍历取最优值的步骤,可为起伏板防波堤的支撑刚度设计提供参考。     

孤立波与升沉水平板相互作用数值模拟研究

合理的刚度和潜深设计可以使升沉水平板获得优异的消浪性能。基于考虑流体黏性的二维不可压缩Navier-Stokes方程,以高阶紧致插值CIP(constrained interpolation profile)方法求解方程对流项,采用VOF(volume of fluid)方法重构自由液面,构建二维数值波浪水槽。采用试验数据验证模型后,研究孤立波与升沉水平板相互作用,分析相对刚度K*、相对潜深d/h、相对波高H/h对于升沉板的消浪性能和运动响应的影响,揭示升沉板对孤立波的消浪机理。研究表明:在孤立波通过时,升沉板会经历一个先上升后下降的运动,随后非线性自由振动,板下方水体近似均匀流动,且水流的垂向流动与板的垂荡方向一致;升沉板主要通过不对称涡旋脱落、浅水变形、波浪反射与辐射波转化等方式消耗孤立波能量;一定条件下,采用最优相对刚度K*=4.0和最优相对潜深d/h=0.52可以取得良好的消浪效果,此时透射系数最小,同时升沉板的运动响应在合理的范围内。     

港域波浪数学模型的改进与验证

通过物理模型对改进的港内波浪传播变形数学模型进行验证。该数学模型以推广的时变缓坡方程为控制方程,采用含松弛因子的ADI法求解,并对波浪反射和透射边界模拟方法进行改进。先通过物理模型试验确定斜向浪入射条件下抛石防波堤前的波浪反射系数,作为数学模型中部分反射边界模拟的依据。然后进行了一个典型港口内波浪折射、绕射和反射的模型试验,测量港内波浪分布。对比模型试验和数学模型计算的结果表明,数学模型可较好地模拟港内复杂地形和边界条件下规则波和不规则波的传播变形。     

波浪作用下锚链系泊浮式防波堤动力响应的数值模型研究

浮式防波堤充分利用波能在水深方向的分布特性,在满足工程消浪要求的同时对海域水沙交换影响较小,且能够快速布置,在某些实际工程有一定应用前景。为了深入了解波浪作用下浮式防波堤的动力响应,基于OpenFOAM标准求解器olaFlow,在刚体运动求解计算中植入锚链求解模块MOODY(mooring cable dynamics),实现了基于重叠网格方法的浮体运动与锚链受力耦合求解,建立了锚链系泊浮式防波堤动力响应的二维数值模型。利用该数值模型对锚链系泊单方箱浮式防波堤在波浪作用下的透射系数、运动响应、锚链张力进行了模拟,并和相关试验结果进行了比较。结果表明,模型能够准确模拟二维波浪和浮式防波堤的相互作用,并用于三维模型的改进。     

没水倾斜板式防波堤消波性能分析

提出了一种将波浪中倾斜板问题等效化简为波浪中水平板单元组的方法,该方法建立在使用分离变量法求解水工结构边值问题的基础上,并使用伽辽金法精确求解连续边界条件,确定考虑衰减波态的速度势函数,从而求解没水倾斜板结构的消波性能。等效化简法计算精度于边界元法相当,且计算单元数量少、开销低。基于二维线性势波理论,对没水倾斜板式防波堤消波性能分析显示,没水板的倾斜角度、没水深度与板长是结构消波性能的控制因素:没水倾斜板防波堤的消波性能优于没水水平板防波堤的消波性能,随着没水板结构的倾斜角度增大,没水倾斜板结构的波浪透射系数显著减小,且长板优于短板,浅板优于深板;与前人的水槽实验对比显示,相对没水深度与波陡影响结构的消波性能,且波陡造成的波浪破碎贡献了显著的波能消耗。该结论对板式防波堤的结构配置、优化设计有重要意义。     

波浪作用下方箱-水平板浮式防波堤时域水动力分析

在线性化势流理论范围内求解方箱-水平板浮式防波堤的波浪绕射和辐射问题,从时域角度分析了浮式防波堤的水动力特性.采用格林函数法将速度势定解问题的控制微分方程变换成边界上的积分方程进行数值求解,浮式防波堤的运动方程采用四阶Runge-Kutta方法求解.对不同层数水平板的浮式防波堤的波浪透射系数、运动响应和锚链受力进行了计算分析,结果表明方箱相对宽度对方箱-水平板浮式防波堤的波浪透射作用有重要的影响,透射系数随着方箱相对宽度的增加而减小.对于方箱加二层水平板的浮式防波堤,在本研究的计算条件下,当方箱相对宽度从0.110增加至0.295时,透射系数从0.88减小至0.30.水平板有利于增加浮式防波堤对波浪的衰减作用,但随着水平板层数从0增加至2,这种波浪衰减作用增加的程度趋弱.方箱-水平板的浮式防波堤的运动量小于单一方箱防波堤的运动量.与此对应,方箱-水平板防波堤的锚链受力小于单一方箱防波堤的锚链受力.     

非线性效应对浅水水波变形的影响

本文采用波数矢量无旋和波能守恒方程建立了一个考虑非线性作用的浅水水波变形数值模型,模型中采用Ｂａｔｔｊｅｓ关系与波数矢量无旋,波能守恒方程一起来求解波浪在浅水中变形的波浪要素,在波能守恒方程中考虑了底摩擦的影响。利用本文提出的数值模型对一个斜坡浅滩水域波浪折射绕射现象进行了验证,验证计算中用一个非线性经验弥散关系近似浅水水波变形的非线性效应并与用线性弥散关系的计算结果进行了比较,结果说明使用非线性     

数值波浪水槽中完全非线性浅水波仿真特性研究

应用基于势流理论的时域高阶边界元方法,建立一个完全非线性的三维数值波浪水槽,通过实时模拟推板造波运动的方式产生波浪。通过混合欧拉-拉格朗日方法和四阶Runge-Kutta方法更新自由水面和造波板的瞬时位置。利用所建模型分别模拟了有限水深波和浅水波,与试验结果、相关文献结果和浅水理论结果吻合较好,且波浪能够稳定传播。系统地讨论造波板的运动圆频率、振幅和水深等对波浪传播和波浪特性的影响,并对波浪的非线性特性进行分析,研究发现造波板运动频率、运动振幅以及水深均将对波浪形态和波浪非线性产生显著影响。结果为真实水槽造波机的运动控制以及波浪生成试验提供了依据,便于实验室设置更合理的参数来准确模拟不同条件下的波浪。     

减少航道外波浪集聚对策研究

进港航道开挖引起波能重新分布 ,导致航道外近区域波能聚集 ,波高增大 ,从而影响防波堤稳定及港内泊稳条件。文章介绍了 Boussinesq方程的推导过程和发展过程 ,基于深水和缓变地形的色散关系 ,建立了波浪数学模型。该模型可用于研究深水和浅水地区波浪的浅水变形、折射、绕射和反射。并提出了减少波能聚集、降低堤前波高的多种措施。结合大窑湾港实际工程 ,经过多方面的数物模比选 ,利用数学模型优化出一种可行的喇叭口航道开挖方案并付诸实施 ,降低了防波堤的堤前波高 ,满足了预期的设计要求。     

规则波作用下透空格栅板式防波堤波浪力试验研究

透空格栅板式防波堤是一种新型防波堤结构,为了促进该结构在实际工程中的应用,论文通过模型试验研究其所受波浪点压力和波浪总力的特征。试验结果表明,在规则波作用下,下层水平格栅板所受波浪点压力较上层水平格栅板大,且防波堤中前端波浪点压力分布不规律;相对板宽B/L对该防波堤所受波浪总力的影响较大,相对板间距S/h对其整体稳定性的影响次之,而相对波高H/h主要影响该防波堤的垂向受力;此外,当上层水平格栅板与静水面齐平且孔隙率相对较大时,该防波堤所受波浪总力最小,对其整体稳定性最有利。     

The effects of reflection coefficient of the harbour sidewall on the performance of floating breakwaters

This paper studies the interaction of linear water waves with a moored floating breakwater with a leeward boundary composed from a vertical wall. This describes a real modelling for the case of ports in contrary to the problems of unbounded domains. It involves the application of a partial reflection boundary condition for this sidewall. In fact, the partial reflection problem in practical application is of great importance in the design of a harbour or breakwater and mainly for short waves. The reflection coefficient of the harbour boundary (sidewall) plays an important role in modifying the performance of the floating breakwater. Moreover, it reduces the resonant peaks appearing inside the ports due to the energy accumulation in an enclosed domain. The effects of the variation of structural parameters of the breakwater on the transmitted wave height are discussed in details for various values of partial reflection.     

Numerical Wave Flume Study on Wave Motion Around Submerged Plates

1 .IntroductionApile supportedplatesubmergedatacertaindepthunderseasurfacewasdevelopedasanewtypeofunderwaterbreakwaterfortheprotectionofcoastlinesandharbors .Thisisbecauseitdoesnothinderthewaterexchangebetweentheopenseaandtheprotectedareanordoesithindertheviewovertheopensea .Besides,itislessdependentonthegeotechnicalconditionsoftheseabottomwherethestructureistobeinstalled ;however,itscostishigh ,particularlyinrelativelydeepwaters .Formanyapplicationsitispossibletoreducethewavemotionintheprotec…     

Hydrodynamic characteristics of semi-immersed breakwater with an attached porous plate

In the present study, wave interaction with a fixed, partially immersed breakwater of box type with a plate attached (impermeable-permeable) at the front part of the structure is investigated numerically and experimentally. The large scale laboratory experiments on the interaction of regular waves with the special breakwater were conducted in the wave flume of Laboratori d’Enginyeria Marνtima (LIM) at Universitat Politecnica de Catalunya (UPC) in Barcelona. Experimental results are compared with numerical results obtained with the use of the Cornell breaking Wave and Structures (COBRAS) wave model. The effects of an impermeable as well as a permeable plate attached to the bottom of the breakwater on its hydrodynamic characteristics (wave transmission, reflection, dissipation, velocity and turbulence kinetic energy) are investigated. Computed velocities and turbulence kinetic energy in the vicinity of the structure indicate the effects of the breakwater with the attached (impermeable/permeable) plate on the flow pattern and the turbulence structure. The attached impermeable plate at the front part of the breakwater enhances significantly the efficiency of the structure in attenuating the incident waves. The permeable plate reduces the efficiency of the structure since wave energy is transmitted through the porous body of the plate. Based on the hydrodynamic characteristics it is inferred that the breakwater with an impermeable plate attached to its bottom is more efficient. The comparison of horizontal and vertical forces acting on the breakwater for all cases examined reveals that plate porosity influences slightly vertical force and severely horizontal force acting on the structure, reducing maximum values in both cases.     

Wave motion over a submerged breakwater with an upper horizontal porous plate and a lower horizontal solid plate

This study examines the hydrodynamic performance of a modified two-layer horizontal-plate breakwater. The breakwater consists of an upper submerged horizontal porous plate and a lower submerged horizontal solid plate. By means of the matched eigenfunction expansion method, a linear analytical solution is developed for the interaction of water waves with the structure. Then the reflection coefficient, the transmission coefficient, the energy-loss coefficient and the wave forces acting on the plates are calculated. The numerical results obtained for limiting cases are exactly the same as previous predictions for a single submerged horizontal solid plate and a single submerged horizontal porous plate. Numerical results show that with a suitable geometrical porosity of the upper plate, the uplift wave forces on both plates can be controlled at a low level. Numerical results also show that the transmission coefficient will be always small if the dimensionless plate length (plate length versus incident wavelength) exceeds a certain moderate value. This is rather significant for practical engineering, as the incident wavelength varies over a wide range in practice. Moreover, it is found that the hydrodynamic performance of the present structure may be further enhanced if the lower plate is also perforated.     

Wave interaction with a perforated wall breakwater with a submerged horizontal porous plate

This study examines the hydrodynamic performance of a new perforated-wall breakwater. The breakwater consists of a perforated front wall, a solid back wall and a submerged horizontal porous plate installed between them. The horizontal porous plate enhances the stability and wave-absorbing capacity of the structure. An analytical solution based on linear potential theory is developed for the interaction of water waves with the new proposed breakwater. According to the division of the structure, the whole fluid domain is divided into three sub-domains, and the velocity potential in each domain is obtained using the matched eigenfunction method. Then the reflection coefficient and the wave forces and moments on the perforated front wall and the submerged horizontal porous plate are calculated. The numerical results obtained for limiting cases are exactly the same as previous predictions for a perforated-wall breakwater with a submerged horizontal solid plate [Yip, T.L., Chwang, A.T., 2000. Perforated wall breakwater with internal horiontal plate. Journal of Engineering Mechanics ASCE 126 (5), 533–538] and a vertical wall with a submerged horizontal porous plate [Wu, J.H., Wan, Z.P., Fang, Y., 1998. Wave reflection by a vertical wall with a horizontal submerged porous plate. Ocean Engineering 25 (9), 767–779]. Numerical results show that with suitable geometric porosity of the front wall and horizontal plate, the reflection coefficient will be always rather small if the relative wave absorbing chamber width (distance between the front and back walls versus incident wavelength) exceeds a certain small value. In addition, the wave force and moment on the horizontal plate decrease significantly with the increase of the plate porosity.     

The theoretical study on diagonal wave interaction with perforated-wall breakwater with rock fill

The interaction of diagonal waves with perforated-wall breakwater partially filled with rock fill is studied using the linear potential theory. By means of the matched eigenfunction expansion method, an analytical method is presented to calculate the reflection coefficient and the wave force coefficient of the breakwater. The calculated results of the reflection coefficient for limiting cases are the same to the existing results. The main effect factors of the reflection coefficient and the wave force coefficient are analyzed by numerical examples. With the increasing of thickness of rock fill, the wave force coefficient on the perforated wall generally decreases, while the reflection coefficient increases. With the increasing of the incident angle of the wave, the reflection coefficient of the breakwater first decreases, reaches its minimum, and then increases monotonously.     

斜向波与带填料开孔板式防波堤相互作用的研究

基于线性势流理论,对斜向波与消浪室内带部分填料的开孔板式防波堤结构的相互作用进行了理论研究.利用匹配特征函数展开法给出了开孔防波堤结构反射系数和波浪力系数的理论计算方法,在极限情况下的计算结果与已有结果一致.利用数值算例分析了开孔结构反射系数和波浪力系数的主要影响因素.增加消浪室内填料厚度通常可以降低开孔墙结构的波浪力系数,加大结构的反射系数.随着波浪入射角度的增加,带填料防波堤结构的反射系数值先减小,达到最小值后又单调增加.