Modelling of stormwater biofilters under random hydrologic variability: a case study of a car park at Monash University,Victoria (Australia)

Biofiltration systems represent an effective technology for the management of urban stormwater runoff volumes and quality. The performance of these systems, although largely dependent on their physical characteristics, is also strongly affected by the natural variability of runoff occurrence and volumes. This article presents a model that describes the statistical behaviour of the main variables involved in the water balance of a biofiltration system, given its main physical properties (filter media and vegetation types) and accounting for the natural inflow variability in terms of occurrence and water volumes. The model permits the analytical derivation of the long‐term (e.g. annual) probability density function of the soil water content in the filter media and the estimation of the main statistics of water fluxes, that is, outflow, evapotranspiration and overflow. By relating the soil water content in the filter media before inflow events to the outflow total nitrogen concentrations, the model also gives estimates of the statistics of nitrogen removal performance as a function of inflow variability. The model was tested against field data collected at a stormwater biofiltration system in Melbourne, Australia. The model could be used to rapidly assess the hydrologic and nitrogen treatment performance of alternative applications of biofiltration for stormwater management across a range of climates. Copyright © 2011 John Wiley & Sons, Ltd.     

Modelling hydrological response to a fully‐monitored urban bioretention cell

Municipalities and agencies use green infrastructure to combat pollution and hydrological impacts (e.g., flooding) related to excess stormwater. Bioretention cells are one type of infiltration green infrastructure intervention that infiltrate and redistribute otherwise uncontrolled stormwater volume. However, the effects of these installations on the rest of the local water cycle is understudied; in particular, impacts on stormwater return flows and groundwater levels are not fully understood. In this study, full water cycle monitoring data were used to construct and calibrate a two‐dimensional Richards equation model (HYDRUS‐2D/3D) detailing hydrological implications of an unlined bioretention cell (Cleveland, Ohio) that accepts direct runoff from surrounding impervious surfaces. Using both preinstallation and postinstallation data, the model was used to (a) establish a mass balance to determine reduction in stormwater return flow, (b) evaluate green infrastructure effects on subsurface water dynamics, and (c) determine model sensitivity to measured soil properties. Comparisons of modelled versus observed data indicated that the model captured many hydrological aspects of the bioretention cell, including subsurface storage and transient groundwater mounding. Model outputs suggested that the bioretention cell reduced stormwater return flows into the local sewer collection system, though the extent of this benefit was attenuated during high inflow events that may have exhausted detention capacity. The model also demonstrated how, prior to bioretention cell installation, surface and subsurface hydrology were largely decoupled, whereas after installation, exfiltration from the bioretention cell activated a new groundwater dynamic. Still, the extent of groundwater mounding from the cell was limited in spatial extent and did not threaten other subsurface infrastructure. Finally, the sensitivity analysis demonstrated that the overall hydrological response was regulated by the hydraulics of the bioretention cell fill material, which controlled water entry into the system, and by the water retention parameters of the native soil, which controlled connectivity between the surface and groundwater.     

Assessing the effects of catchment‐scale urban green infrastructure retrofits on hydrograph characteristics

Run‐off from impervious surfaces has pervasive and serious consequences for urban streams, but the detrimental effects of urban stormwater can be lessened by disconnecting impervious surfaces and redirecting run‐off to decentralized green infrastructure. This study used a before–after‐control‐impact design, in which streets served as subcatchments, to quantify hydrologic effectiveness of street‐scale investments in green infrastructure, such as street‐connected bioretention cells, rain gardens and rain barrels. On the two residential treatment streets, voluntary participation resulted in 32.2% and 13.5% of parcels having green infrastructure installed over a 2‐year period. Storm sewer discharge was measured before and after green infrastructure implementation, and peak discharge, total run‐off volume and hydrograph lags were analysed. On the street with smaller lots and lower participation, green infrastructure installation succeeded in reducing peak discharge by up to 33% and total storm run‐off by up to 40%. On the street with larger lots and higher participation, there was no significant reduction in peak or total stormflows, but on this street, contemporaneous street repairs may have offset improvements. On the street with smaller lots, lag times increased following the first phase of green infrastructure construction, in which streetside bioretention cells were built with underdrains. In the second phase, lag times did not change further, because bioretention cells were built without underdrains and water was removed from the system, rather than just delayed. We conclude that voluntary green infrastructure retrofits that include treatment of street run‐off can be effective for substantially reducing stormwater but that small differences in design and construction can be important for determining the level of the benefit. Copyright © 2015 John Wiley & Sons, Ltd.     

Runoff‐generating processes in hydromorphic soils on a plot scale: free gravity‐driven versus pressure‐controlled flow

Draining soil water is an important runoff generator. This study aims to describe runoff‐generating processes on a plot scale (1 m²) in hydromorphic soils with different initial soil water contents. We irrigated 16 hydromorphic soils in the northern Pre‐Alps in Switzerland and recorded the variations in water content with time domain reflectometry (TDR) at five different depths per plot. Sprinkling was repeated three times at approximately 23‐h intervals and lasted for 1 h with a volume flux density of 70 mm h^?1. The comparison between the measured water content of the drainages with two physically based models revealed which of the flow processes dominated during water recessions. We distinguished between vertical drainage, lateral outflow and infiltration without drainage. Approximately 45% of all recorded time series of soil water content did not drain within approximately 20 h after the end of irrigation, about 25% drained laterally and 10% of the outflow was vertical. The drainage of the remaining 20% was the result of both lateral and vertical water flow (≈12%), or was not interpretable with the approaches applied (≈8%). Vertical flow was only observed in layers without any or with just a few hydromorphic features. Lateral draining horizons had approximately half the storage capacity and amplitude of water recession of those with vertical flow. Vertical flow was only observed in the upper soil horizons. Thus, vertical flow transmitted water to layers with lateral outflow and did not delay runoff by deep percolation. Increasing initial soil moisture increased the percentage of water content recordings according to a lateral outflow slightly, while vertical flow was less frequent. Copyright © 2010 John Wiley & Sons, Ltd.     

Effectiveness of landscape‐based green infrastructure for stormwater management in suburban catchments

Land cover changes associated with urbanization have negative effects on downstream ecosystems. Contemporary urban development attempts to mitigate these effects by designing stormwater infrastructure to mimic predevelopment hydrology, but their performance is highly variable. This study used in situ monitoring of recently built neighbourhoods to evaluate the catchment‐scale effectiveness of landscape decentralized stormwater control measures (SCMs) in the form of street connected vegetated swales for reducing runoff volumes and flow rates relative to curb‐and‐gutter infrastructure. Effectiveness of the SCMs was quantified by monitoring runoff for 8 months at the outlets of 4 suburban catchments (0.76–5.25 ha) in Maryland, USA. Three “grey” catchments installed curb‐and‐gutter stormwater conveyances, whereas the fourth “green” catchment built parcel‐level vegetated swales. The catchment with decentralized SCMs reduced runoff, runoff ratio, and peak runoff compared with the grey infrastructure catchments. In addition, the green catchment delayed runoff, resulting in longer precipitation–runoff lag times. Runoff ratios across the monitoring period were 0.13 at the green catchment and 0.37, 0.35, and 0.18 at the 3 grey catchments. Runoff only commenced after 6 mm of precipitation at the decentralized SCM catchment, whereas runoff occurred even during the smallest events at the grey catchments. However, as precipitation magnitudes reached 20 mm, the green catchment runoff characteristics were similar to those at the grey catchments, which made up 37% of the total precipitation in only 10 of 72 events. Therefore, volume‐based reduction goals for stormwater using decentralized SCMs such as vegetated swales require additional redundant SCMs in a treatment train as source control and/or end‐of‐pipe detention to capture a larger fraction of runoff and more effectively mimic predevelopment hydrology for the relatively rare but larger precipitation events.     

Rainfall retention and runoff generation processes in tropical mature green roof ecosystems

Rainfall retention and runoff detention are likely the most important ecosystem services provided by extensive green roofs (EGRs) that contribute to urban stormwater mitigation and management. However, the hydrological performance and runoff generation mechanisms of mature, well-established EGRs in tropical regions remain poorly understood. This study evaluated the rainfall retention, discharge detention times and processes of runoff generation in two neighbouring 20-year-old EGRs with different slopes (2° and 14° for EGRns and EGRws, respectively) and management practices in Mexico City; results were compared with those obtained in a conventional roof (CR, 2° slope). Precipitation, substrate moisture and storm runoff were continuously measured during the 2017 and 2018 rainy seasons (May–November). Results showed spatial differences in substrate properties and moisture within and between green roofs. In general, higher bulk densities and a wide range of variation in water content characterized the bare substrate areas compared to those below vegetation. Greatest increases in substrate moisture and storm runoff were observed in the steeper green roof. Subsurface flow was the dominant process controlling the amount and timing of stormflow in the EGRs. The occurrence of saturation excess overland flow was small and detected when large rain events were preceded by high wetness conditions. The main factors influencing the hydrological responses of the green roofs were their substrate hydrophysical properties, related mostly to vegetation cover, management and age, and to much lesser extent to slope and substrate depth. On average, rainfall retention was ~60% in the EGRs with significantly longer delays and prolonged runoff times (100 and 340 min, respectively) compared to CR (3%, 20 min, and 258 min, respectively). Overall, these findings highlight the potential of EGRs in reducing stormflow and peak discharges for most rainfall in Mexico City, and thus mitigating the risk of saturation and overflow of urban drainages.     

Hydrologic response of engineered media in living roofs and bioretention to large rainfalls: experiments and modeling

The hydrologic response of engineered media plays an important role in determining a stormwater control measure's ability to reduce runoff volume, flow rate, timing, and pollutant loads. Five engineered media, typical of living roof and bioretention stormwater control measures, were investigated in laboratory column experiments for their hydrologic responses to steady, large inflow rates. The inflow, medium water content response, and outflow were all measured. The water flow mechanism (uniform flow vs. preferential flow) was investigated by analyzing medium water content response in terms of timing, magnitude, and sequence with depth. Modeling the hydrologic process was conducted in the HYDRUS‐1D software, applying the Richards equation for uniform flow modeling, and a mobile–immobile model for preferential flow modeling. Uniform flow existed in most cases, including all initially dry living roof media with bimodal pore size distributions and one bioretention medium with unimodal pore size distribution. The Richards equation can predict the outflow hydrograph reasonably well for uniform flow conditions when medium hydraulic properties are adequately represented by appropriate functions. Preferential flow was found in two media with bimodal pore size distributions. The occurrence of preferential flow is more likely due to the interaction between the bimodal pore structure and the initial water content rather than the large inflow rate.     

Understanding plot‐scale hydrology of Lesser Himalayan watershed—A field study and HYDRUS‐2D modelling approach

Soil moisture dynamics have a significant effect on overland flow generation. Catchment aspect is one of the major controlling factors of overland flow and soil moisture behaviour. A few experimental studies have been carried out in the uneven topography of the Himalayas. This study presents plot‐scale experiments using portable rainfall simulator at an altitude of 1,230 m above mean sea level and modelling of overland flow using observed datasets. Two plots were selected in 2 different aspects of Aglar watershed of Lesser Himalaya; the agro‐forested (AF) plot was positioned at the north aspect whereas the degraded (DE) plot was located at the south aspect of the hillslope. HS flumes and rain gauges were installed to measure the runoff at the outlet of the plot and the rainfall depth during rainfall simulation experiments. Moreover, 10 soil moisture sensors were installed at upslope and downslope locations of both the plots at 5, 15, 25, 35, and 45 cm depth from ground level to capture the soil moisture dynamics. The tests were conducted at intensities of 79.8 and 75 mm/hr in AF plot and 82.2 and 72 mm/hr in the DE plot during Test 1 and Test 2, respectively. The observed data indicate the presence of reinfiltration process only in the AF plot. The high water holding capacity and the presence of reinfiltration process results in less runoff volume in the AF plot compared with the DE plot. The Hortonian overland flow mechanism was found to be the dominant overland flow mechanism as only a few layers of top soil get saturated during all of the rainfall–runoff experiments. The runoff, rainfall, and soil moisture data were subsequently used to calibrate the parameters of HYDRUS‐2D overland flow module to simulate the runoff hydrograph and soil moisture. The components of hydrograph were evaluated in terms of peak discharge, runoff volume and time of concentration, the results were found to be within the satisfactory range. The goodness of fit of simulated hydrographs were more than 0.85 and 0.95 for AF and DE plot, respectively. The model produced satisfactory simulation results of soil moisture for all of the rainfall–runoff experiments. The HYDRUS‐2D overland flow module was found promising to simulate the runoff hydrograph and soil moisture in plot‐scale research.     

Precipitation induced stream flow: An event based chemical and isotopic study of a small stream in the Great Plains region of the USA

A small stream in the Great Plains of USA was sampled to understand the streamflow components following intense precipitation and the influence of water storage structures in the drainage basin. Precipitation, stream, ponds, ground-water and soil moisture were sampled for determination of isotopic (D, ¹⁸O) and chemical (Cl, SO₄) composition before and after two intense rain events. Following the first storm event, flow at the downstream locations was generated primarily through shallow subsurface flow and runoff whereas in the headwaters region – where a pond is located in the stream channel – shallow ground-water and pond outflow contributed to the flow. The distinct isotopic signatures of precipitation and the evaporated pond water allowed separation of the event water from the other sources that contributed to the flow. Similarly, variations in the Cl and SO₄ concentrations helped identify the relative contributions of ground-water and soil moisture to the streamflow. The relationship between deuterium excess and Cl or SO₄ content reveals that the early contributions from a rain event to streamflow depend upon the antecedent climatic conditions and the position along the stream channel within the watershed. The design of this study, in which data from several locations within a watershed were collected, shows that in small streams changes in relative contributions from ground water and soil moisture complicate hydrograph separation, with surface-water bodies providing additional complexity. It also demonstrates the usefulness of combined chemical and isotopic methods in hydrologic investigations, especially the utility of the deuterium excess parameter in quantifying the relative contributions of various source components to the stream flow.     

Evaluating hydrologic performance of bioretention cells in shallow groundwater

Bioretention cells, which are generally effective in controlling surface runoff and recharging groundwater, have been widely adopted as low impact development practices. However, shallow groundwater has limited their implementation in some locations due to the potential problems of a reduction in surface runoff control, groundwater pollution, and continuous groundwater drainage through the underdrain. Many guidelines have established minimum requirements for the groundwater depth below bioretention cells, but they may not be optimized for certain environmental conditions and bioretention cell designs. This study made use of a variably saturated flow model to examine the hydrologic performance of a single bioretention cell in shallow groundwater with event‐based simulations, considering a wide range of initial groundwater depths, media and in situ soil types, surface runoff loads, and underdrain sizes. Performance indicators (e.g., runoff reduction, time for infiltrated water to reach the bioretention cell bottom and the groundwater table, and height and dissipation time of groundwater mound) were evaluated to examine the processes of runoff generation, the formation and dissipation of groundwater mounds, and the bioretention cell's performance in a shallow groundwater environment. The most influential factors were the initial groundwater depth, the hydraulic conductivity of the media soil, and the rainfall runoff load. With a deeper initial groundwater table, infiltrated water took longer to reach the bioretention cell bottom and groundwater table. Groundwater mounds, however, took longer to dissipate even though they were smaller. The groundwater quality can be better protected if relatively less‐permeable soil types (e.g., sandy loam) are used as the media, although it may compromise the performance in runoff quantity control. However, only very high surface runoff loads would cause concerns regarding a reduction in runoff quantity control and possible groundwater contamination due to the shallow groundwater. A distance of 1.5–3 m between the bioretention cell bottom and the groundwater table is generally sufficient. The results of this study could help to guide the planning and design of bioretention cells in areas of shallow groundwater.     

Seasonal climatic effects on the hydrology of a rain garden

This paper evaluates the performance and winter hydrology of two small‐scale rain gardens in a cold climate coastal area in Trondheim, Norway. One rain garden received runoff from a small residential watershed over a 20 month study period while the second rain garden with a shorter study period of 7 months was used as a control. The objective of the study was to investigate the extent to which cold climatic conditions would influence the hydrology and performance of the rain gardens. The hydraulic detention, storm lag time and peak flow reduction were measured and compared seasonally. No significant difference between seasonal lag time could be found, but there was a clear decreasing trend in lag time between rain, rain‐on‐snow and snowmelt. The average peak flow reduction for 44 storms in the study period was 42% compared to 27% for the winter seasons, indicating that the performance of the rain garden is reduced in the cold season (below 0 °C). The average hydraulic detention time for the rain garden was 0·84 ( ± 0·73) with runoff inflow and 1·91 ( ± 3·1) with only precipitation. A strong positive correlation was found between the time since the last wetting event and lag time, and between air temperature and hydraulic detention. This indicates that the time between events and seasonal air temperatures are key parameters in the hydraulic performance of cold climate rain gardens. The rain gardens were not used for snow storage areas, and a volume requirement for this was not evaluated in the study. Copyright © 2007 John Wiley & Sons, Ltd.     

Experimental study on the hydrological performance of green roofs in the application of novel biochar

Biochar has the potential to be a soil amendment in green roofs owing to its water retention, nutrient supply, and carbon sequestration application. The combined effects of biochar and vegetated soil on hydraulic performance (e.g., saturated hydraulic conductivity, retention and detention, and runoff delay) are the crucial factor for the application of the novel biochar in green roofs. Recent studies investigated soil water potential (i.e., suction) either on vegetated soil or on biochar-amended soil but rarely focused on their integrated application. With the purpose of investigating the hydraulic performance of green roofs in the application of biochar, the combined effect of biochar and vegetated soil on hydrological processes was explored. Artificial rainfall experiments were conducted on the four types of experimental soil columns, including natural soil, biochar-amended soil, vegetated natural soil, and vegetated biochar-amended soil. The surface ponding, bottom drainage and the volumetric water content were measured during the rainfall test. Simulation method by using HYDRUS-1D was adopted for estimating hydraulic parameters and developing modelling analysis. The results indicated that the saturated hydraulic conductivity of vegetated soil columns were higher than bare soil columns. The addition of biochar decreased the saturated hydraulic conductivity, and the magnitude of decrease was much significant in the case of vegetated soil. The influence of vegetation on permeability is more prominent than biochar. The vegetated biochar-amended soil has the highest retention and detention capacity, and shows a preferable runoff delay effect under heavy rain among the four soil columns. The results from the present study help to understand the hydrological processes in the green roof in the application of biochar, and imply that biochar can be an alternative soil amendment to improve the hydraulic performance.     

Evaluating the spatial distribution of water balance in a small watershed,Pennsylvania

A conceptual water‐balance model was modified from a point application to be distributed for evaluating the spatial distribution of watershed water balance based on daily precipitation, temperature and other hydrological parameters. The model was calibrated by comparing simulated daily variation in soil moisture with field observed data and results of another model that simulates the vertical soil moisture flow by numerically solving Richards' equation. The impacts of soil and land use on the hydrological components of the water balance, such as evapotranspiration, soil moisture deficit, runoff and subsurface drainage, were evaluated with the calibrated model in this study. Given the same meteorological conditions and land use, the soil moisture deficit, evapotranspiration and surface runoff increase, and subsurface drainage decreases, as the available water capacity of soil increases. Among various land uses, alfalfa produced high soil moisture deficit and evapotranspiration and lower surface runoff and subsurface drainage, whereas soybeans produced an opposite trend. The simulated distribution of various hydrological components shows the combined effect of soil and land use. Simulated hydrological components compare well with observed data. The study demonstrated that the distributed water balance approach is efficient and has advantages over the use of single average value of hydrological variables and the application at a single point in the traditional practice. Copyright © 2000 John Wiley & Sons, Ltd.     

降雨条件下边坡体积含水率变化规律研究

持续降雨是边坡发生失稳破坏的主要诱因之一,基于饱和—非饱和渗流理论,对梅州市大埔县某边坡的渗流场进行模拟,研究在不同降雨工况下该边坡土体体积含水率的时空变化规律。研究结果表明:相同条件下,降雨强度越大(降雨历时越长),边坡表层土体体积含水率变化越大;降雨强度60 mm/d历时1 d的暴雨对边坡表层土体体积含水率的增幅作用存在着一定的滞后性,其余工况未表现出滞后现象;降雨强度为120mm/d和300 mm/d的两种工况各研究点任意时段体积含水率较为接近;当降雨强度达到60 mm/d以上时,边坡内部体积含水率空间变化主要受降雨历时影响,降雨历时越长,降雨入渗深度和体积含水率变化越大。     

Is there a limit to bioretention effectiveness? Evaluation of stormwater bioretention treatment using a lumped urban ecohydrologic model and ecologically based design criteria

In this study, we developed the urban ecohydrology model (UEM) to investigate the role of bioretention on watershed water balance, runoff production, and streamflow variability. UEM partitions the land surface into pervious, impervious, and bioretention cell fractions. Soil moisture and vegetation dynamics are simulated in pervious areas and bioretention cells using a lumped ecohydrological approach. Bioretention cells receive runoff from a fraction of impervious areas. The model is calibrated in an urban headwater catchment near Seattle, WA, USA, using hourly weather data and streamflow observations for 3 years. The calibrated model is first used to investigate the relationship between streamflow variability and bioretention cell size that receives runoff from different values of impervious area in the watershed. Streamflow variability is quantified by 2 indices, high pulse count (HPC), which quantifies the number of flow high pulses in a water year above a threshold, and high pulse range (HPR), which defines the time over which the pulses occurred. Low values of these indices are associated with improved stream health. The effectiveness of the modelled bioretention facilities are measured by their influence on reducing HPC and HPR and on flow duration curves in comparison with modelled fully forested conditions. We used UEM to examine the effectiveness of bioretention cells under rainfall regimes that are wetter and drier than the study area in an effort to understand linkages between the degree of urbanization, climate, and design bioretention cell size to improve inferred stream health conditions. In all model simulations, limits to the reduction of HPC and HPR indicators were reached as the size of bioretention cells grew. Bioretention was more effective as the rainfall regime gets drier. Results may guide bioretention design practices and future studies to explore climate change impacts on bioretention design and management.     

Impact of road‐generated storm runoff on a small catchment response

The impact of road‐generated runoff on the hydrological response of a zero‐order basin was monitored for a sequence of 24 storm events. The study was conducted in a zero‐order basin (C1; 0·5ha) with an unpaved mountain road; an adjacent unroaded zero‐order basin (C2; 0·2 ha) with similar topography and lithology was used to evaluate the hydrological behaviour of the affected zero‐order basin prior to construction of the road. The impact of the road at the zero‐order basin scale was highly dependent on the antecedent soil‐moisture conditions, total storm precipitation, and to some extent rainfall intensity. At the beginning of the monitoring period, during dry antecedent conditions, road runoff contributed 50% of the total runoff and 70% of the peak flow from the affected catchment (C1). The response from the unroaded catchment was almost insignificant during dry antecedent conditions. As soil moisture increased, the road exerted less influence on the total runoff from the roaded catchment. For very wet conditions, the influence of road‐generated runoff on total outflow from the roaded catchment diminished to only 5·4%. Both catchments, roaded and unroaded, produced equivalent amount of outflow during very wet antecedent conditions on a unit area basis. The lag time between the rainfall and runoff peaks observed in the unroaded catchment during the monitoring period ranged from 0 to 4 h depending on the amount of precipitation and antecedent conditions, owing mainly to much slower subsurface flow pathways in the unroaded zero‐order basin. In contrast, the lag time in the roaded zero‐order basin was virtually nil during all storms. Copyright © 2009 John Wiley & Sons, Ltd.     

Fiber Optic Measurements of Soil Moisture in a Waste Rock Pile

The design and construction of a waste rock pile influences water infiltration and may promote the production of contaminated mine drainage. The objective of this project is to evaluate the use of an active fiber optic distributed temperature sensing (aFO-DTS) protocol to measure infiltration and soil moisture within a flow control layer capping an experimental waste rock pile. Five hundred meters of fiber optic cable were installed in a waste rock pile that is 70 m long, 10 m wide, and was covered with 0.60 m of fine compacted sand and 0.25 m of non-reactive crushed waste rock. Volumetric water content was assessed by heating the fiber optic cable with 15-min heat pulses at 15 W/m every 30 min. To test the aFO-DTS system 14 mm of recharge was applied to the top surface of the waste rock pile over 4 h, simulating a major rain event. The average volumetric water content in the FCL increased from 0.10 to 0.24 over the duration of the test. The volumetric water content measured with aFO-DTS in the FCL and waste rock was within ±0.06 and ±0.03, respectively, compared with values measured using 96 dielectric soil moisture probes over the same time period. Additional results illustrate how water can be confined within the FCL and monitored through an aFO-DTS protocol serving as a practical means to measure soil moisture at an industrial capacity.     

On the estimation of antecedent wetness conditions in rainfall–runoff modelling

The analysis of the physical processes involved in a conceptual model of soil water content balance is addressed with the objective of its application as a component of rainfall–runoff modelling. The model uses routinely measured meteorological variables (rainfall and air temperature) and incorporates a limited number of significant parameters. Its performance in estimating the soil moisture temporal pattern was tested through local measurements of volumetric water content carried out continuously on an experimental plot located in central Italy. The analysis was carried out for different periods in order to test both the representation of infiltration at the short time‐scale and drainage and evapotranspiration processes at the long time‐scale. A robust conceptual model was identified that incorporated the Green–Ampt approach for infiltration and a gravity‐driven approximation for drainage. A sensitivity analysis was performed for the selected model to assess the model robustness and to identify the more significant parameters involved in the principal processes that control the soil moisture temporal pattern. The usefulness of the selected model was tested for the estimation of the initial wetness conditions for rainfall–runoff modelling at the catchment scale. Specifically, the runoff characteristics (runoff depth and peak discharge) were found to be dependent on the pre‐event surface soil moisture. Both observed values and those estimated by the model gave good results. On the contrary, with the antecedent wetness conditions furnished by two versions of the antecedent precipitation index (API), large errors were obtained. Copyright © 2007 John Wiley & Sons, Ltd.     

The water balance of the Betwa basin,India / Le bilan hydrologique du bassin versant de Betwa en Inde

ABSTRACT

A study of the water balance of a basin in India, where the annual monsoon season of water surplus contrasts with a longer period of deficit, shows that estimates of soil moisture recharge and groundwater recharge may be obtained in these circumstances by comparing seasonal net rainfall with runoff on two assumptions: soil moisture recharge is constant from year to year, and groundwater recharge is proportional to runoff.     

Experimental study on lag time for a small watershed

This paper is focused on the lag time of flow confluence. Lag is described empirically by the precipitation factor in hydrological modelling, but the traditional way to establish the relationship between lag and intensity is not very satisfactory in arid and semi‐arid regions. A total 215 rainfall–runoff experiments were conducted to reveal the effects of net rain duration on lag and intensity. The results show that a correlation between lag and rain intensity exists under certain conditions. There is a critical value in net rain intensity (0·8–1 mm min^?1) in the correlation curve of lag and net rain intensity in the given experimental watershed in the laboratory. Similarly, a critical value of net rain duration also exists. This value is the total confluence time. The features of lag time change significantly if intensity or duration is less or greater than the critical value. The study also explores the joint effects of net rain intensity and duration on lag. The formula established among lag, intensity and duration resulted in a better fit. Therefore, the two‐parameter (intensity and duration) empirical formula for lag is better than the traditional single‐parameter (intensity) method. This two‐parameter correlation formula can also be applied to a temporally and spatially uneven runoff processes. A typical field watershed is selected to test the results of the experiments. Copyright © 2006 John Wiley & Sons, Ltd.