The margin between Senja and Spitsbergen fracture zones: Implications from plate tectonics

Analysis of multichannel seismic data from the continental margin off Svalbard between the Senja and Spitsbergen fracture zones suggests that the transition between continental and oceanic crust is located at or close to the Hornsund Fault Zone. In the Late Paleocene/Early Eoeene (57 m.y.) the region between Svalbard and Northeast-Greenland was subjected to regional shear movements associated with a transform system between the young Lofoten-Greenland Basin and the Arctic Ocean. Approximately 50 m.y. ago the spreading axis migrated to the northeast creating a deep basin north of the Greenland-Senja Fracture Zone forming the passive margin between Bear Island and 76.5°N. North of 76.5°N the regional transform was maintained. At the time of the main reorganization of relative plate motion (36 m.y.) the northern margin evolved. A continental fragment was possibly cut off from the Svalbard margin forming a small microcontinent. The microcontinent appears as the submarine ridge which has been associated with the Hovgaard Fracture Zone. It is suggested that the sediments west of the Hornsund Fault Zone are not older than Eocene in the south and mid-Oligocene in the north. The position of the spreading axis has greatly influenced the margin sedimentation.     

Process of Rifting and Collision along Plate Margins of the Qinling Orogenic Belt and Its Geodynamics

The Qinling erogenic belt underwent complicated processes of rifting and collision, as shown by the coexistence of (1) ocean extension and plate margin rifting and (2) subduction of the frontal oceanic crust and extension of the rear plate margin. These resulted in a basin-mountain framework characterized by the coexistence of plates separated by the ocean basin and continental blocks demarcated by the rifting sea trough in the marginal region and the coexistence of subduction orogeny and ocean extension. Generally speaking, the plate marginal area between the North China plate and Yangtze plate continually rifted from north to south and the rifted micro-plates continually accreted northwards. This especial orogenic process was probably controlled by two events of deep mantle geody-namic adjustment and mantle plume activities, which occurred in the Shangdan suture belt and Mianlue suture belt from north to south respectively.     

Precambrian–Palaeozoic geology of Smith Sound, Canada and Greenland: key constraint to palaeogeographic reconstructions of northern Laurentia and the North Atlantic region

Nares Strait separating Greenland and northernmost Canada is floored by continental crust. Most palaeogeographic reconstructions of Laurentia and the North Atlantic region model the seaway as the site of massive sinistral strike–slip and/or compression/transpression, subduction and collision, the supposed manifestations of the hypothetical Wegener Fault. However, these reconstructions fail to take into account the bedrock geology that represents within-plate evolution. Both sides of Smith Sound, the southernmost part of Nares Strait, expose the same early Proterozoic to early Palaeozoic assemblages that are unaffected by seaway-related tectonism or thermal activity. Smith Sound is an intact crustal block or `linchpin' demonstrating that there was no independent Greenland plate. North-west Greenland was not a leading plate margin neither was Nares Strait the site of the plate boundary between Greenland and North America. The Wegener Fault does not exist. The Smith Sound linchpin constitutes a key constraint that must be respected in any palaeogeographic reconstruction of the region.     

Geological events during the early formation of a passive margin

The concept of plate tectonics implies that the normal sea floor spreading stage is preceded by a sequence of events associated with the break-up of continental crust. Thus, evidence of the early development of “non-failed” rifts is to be found at passive continental margins. Of special interest is the question of the extent of the continental crust and the structural and compositional changes associated with the change in crustal type. In addressing these topics, we have focused attention on the Norwegian margin between the Jan Mayen and Senja fracture zones (66°–70°N) in an attempt to understand its history of rifting and early sea floor spreading. p ]The southern part of this rifted margin is characterized by a wide shelf and the marginal Vøring Plateau interrupts a gentle slope at a level of about 1500 m. However, the margin becomes progressively narrower towards the north and a typical narrow shelf and steep slope emerge off the Lofo—tenVesterålen Islands (Fig. 1). In a reconstructed pre-opening configuration (Talwani and Eldholm, 1977) the narrowest part of the juxtaposed EastGreenland margin is found in the south and a wide shelf and slope corresponds to the Lofoten-Vesterålen margin.The most prominent structural element is a buried basement high underneath the Vøring Plateau. The high is bounded landward by the Vøring Plateau Escarpment, a major structural boundary which defines typical changes in the geophysical parameters. These are: (1) a sudden increase of depth to acoustic basement; (2) changes in the velocity-depth function; (3) a gravity gradient; and (4) a magnetic edge anomaly separating sea-floor spreading type anomalies from a quiet zone on the landward side (Talwani and Eldholm, 1972). These observations were interpreted in terms of a sharp ocea—ncontinent crustal transition along the escarpment with sea-floor spreading commencing between anomaly 24 and 25 time (56–58 m.y. B.P.). Alternatively, the concept of ancient oceanic crust landward of this escarpment and the possible existence of continental crust under the outer basement high have been argued and we refer to Eldholm et al. (1979) for a detailed discussion.     

Thermal implications for the evolution of the spitsbergen transform fault

Heat flow taken between Svalbard and Greenland reveal three thermal provinces:

1. (1) the Molloy Ridge within the Spitsbergen Transform,

2. (2) the Yermak Plateau

3. (3) the northeastern margin of Svalbard (Nordaustlandet).

The Molloy Ridge is a short spreading segment and the average heat flow is much above the Sclater et al. (1971), cooling curve but agrees with values from the Norwegian-Greenland Sea. An additional zone of intrusion identified by heat flow lies to the northwest of the Molloy Ridge. It straddles both the visible fracture zone and part of the Yermak Plateau. A thermal boundary lies between the warm western segment of the Yermak Plateau and the shelf off Nordaustlandet. If the thermal subsidence of the western Yermak Plateau can be traced to the latest heating episode then it is likely that the crust is similar to oceanic in composition and not older than 13 m.y. (approximately 20 m.y. younger than the northeastern segment of the plateau). Plate rotation shows that there was no room for the western segment of the plateau prior to anomaly 7. We postulate that the original transform is associated with the Hornsund Fault zone. In response to deviatoric stress across the oblique ridge-transform system, the Nansen Ridge propagated southwestward aborting the old transform trace, and shifted to its present position.It is suggested that this propagation and migration of the ridge-transform system across a zone of extensional deviatoric stress allowed the massive intrusion of basalt forming the Western Yermak Plateau. The propagation phenomenon coincides with large-scale Tertiary volcanic activity on Svalbard.Readjustment and migration of the oblique transform is still taking place. As the transform-ridge system is liberated from continental constraints, the migration rate will diminish as orthogonality is approached.     

Composition and age of tertiary sills and dykes, Jameson Land Basin, East Greenland: relation to regional flood volcanism

The Paleozoic–Mesozoic Jameson Land Basin (East Greenland) is intruded by a sill complex and by a swarm of ESE trending dykes. Together with dykes of the inner Scoresby Sund fjord, they form a regional Early Tertiary intrusive complex located 200–400 km inland of the East Greenland rifted continental margin. Most of the intrusive rocks in the Jameson Land Basin are geochemically coherent and consist of evolved plagioclase–augite–olivine saturated, uncontaminated high-Ti basalt with 48.5–50.2 wt.% SiO₂, 2.2–3.2 wt.% TiO₂, 5.1–7.4 wt.% MgO, 9–17 ppm Nb and La/Yb_N=2.8–3.6. Minor tholeiitic rock types are: (a) low-Ti basalt (49.7 wt.% SiO₂, 1.7 wt.% TiO₂, 6.8 wt.% MgO, 2.6 ppm Nb and La/Yb_N=0.5) akin to oceanic basalts; (b) very-high-Ti basalt (48.6 wt.% SiO₂, 4.1 wt.% TiO₂, 5.1 wt.% MgO and 21 ppm Nb); and (c) plagioclase ultraphyric basalt. The tholeiitic dolerites are cut by alkali basalt (43.7–47.3 wt.% SiO₂, 4.1–5.1 wt.% TiO₂, 4.9–6.2 wt.% MgO, 29–46 ppm Nb and La/Yb_N=16–17) sills and dykes.Modelling of high-field-strength and rare-earth elements indicate that the high-Ti basalts formed from 6–10% melting of approximately equal proportions of garnet- and spinel-bearing mantle of slightly depleted composition beneath thick continental lithosphere. Conversely, dolerite intrusions and flood basalts of similar compositional kindred from adjacent but more rift-proximal occurrences in Northeast Greenland formed from shallower melting of dominantly spinel-bearing mantle beneath extended and thinned continental lithosphere. These variations in lithospheric thickness suggest the continent–ocean transition of the East Greenland rifted volcanic margin is sharp and narrow.⁴⁰Ar–³⁹Ar dating and paleomagnetism show that the high-Ti dolerites were emplaced at 53–52 Ma (most likely during C23r) and hence surprisingly postdate the main flood volcanism by 2–5 Ma and the inception of seafloor spreading between Greenland and Europe by 1–2 Ma. The formation of tholeiitic and alkaline magmas emplaced into the Jameson Land Basin corroborates to the importance of post-breakup magmatism along the East Greenland volcanic rifted margin. Upwelling of the ancestral Iceland mantle plume under central Greenland at 53–52 Ma (rather than under the active rift), perhaps accompanied by a failed attempt to shift the rift zone westward towards the plume axis, may have triggered post-breakup continental magmatism of the Jameson Land Basin and the inner Scoresby Sund region, along preexisting structural lineaments.     

大陆解体与被动陆缘的演化

火山型被动陆缘是大陆解体过程中形成的一类陆缘类型,其演化过程与活动陆缘一样复杂多变。随着近年来对大陆解体过程与被动陆缘演化的深入研究,对其沉积过程、岩浆活动以及变质作用研究都有了很大的进展。陆壳减薄解体的过程有许多不同的模式,不对称的简单剪切模式可能是火山型被动陆缘的成因,其机制是软流圈隆起的最大位置从剖面上看与地壳减薄最大位置不在一条垂线上,造成软流圈上升的岩浆在解体的大陆一侧形成火山型被动陆缘。被动陆缘的沉积建造由两套沉积物组成,一套是大陆解体的裂谷阶段所形成的陆相沉积物和双模式火山岩组合,另一套是稳定陆缘的复理石组合;岩浆作用中基性岩类反应了物质直接源于上地幔的主要特点,并有部分受到地壳混染的特征;变质作用中高温低压环境主要发生在裂谷作用阶段,其特点反映了大陆解体过程中随着时间的增温和减压过程,而拆离伸展阶段则被脆性变形所代替。     

右江盆地晚古生代-三叠纪盆地转换及其构造意义

右江盆地是在南华加里东造山带夷平的基础上经再次裂陷形成的,它的形成与金沙江—红河—马江洋盆关系密切,是该洋盆与扬子板块之间的大陆边缘盆地。早泥盆世晚期—石炭纪随着金沙江—红河—马江洋盆的形成,扬子板块南部边缘开始裂陷,形成特殊的台地与台间海槽相间的大陆边缘裂谷盆地。二叠纪—早三叠世初期随着该洋盆的俯冲消减,形成越北岛弧,右江盆地进入弧后(裂陷)盆地阶段。早三叠世晚期以后,随着该洋盆的闭合和碰撞造山,在红河—马江造山带与扬子板块之间形成以复理石为特征的弧后前陆盆地。因此右江盆地经历了大陆边缘裂谷盆地(早泥盆世晚期—石炭纪)、弧后盆地(二叠纪—早三叠世早期)、弧后前陆盆地(早三叠世晚期—中三叠世)的构造演化阶段。     

The Role of India-Asia Collision in the Amalgamation of the Gondwana-Derived Blocks and Deep-Seated Magmatism During the Paleogene at the Himalayan Foreland Basin and Around the Gongha Syntaxis in the South China Block

Southeast Asia comprises collage of continental blocks that were rifted out in phases from the northern parts of the Gondwanic Indo-Australian continent during the Paleozoic-Mesozoic time and were accreted through continental collision process following closure of the Paleo- and Neo-Tethys. The South China and Indo-China blocks were possibly rifted during early Palaeozoic, whereas, the Tibetan and SIBUMASU blocks were rifted during Permo-Carboniferous when the said margin was under glacial and/or cool climatic condition. The Indo-Burma-Andaman (IBA), Sikule, Lolotoi blocks were also rifted from the same Indo-Australian margin but during late Jurassic. This was followed by break-up of the Indian and the Australian continents during early Cretaceous. The opening of the Indian Ocean during the Tertiary was synchronous with closing of the Tethys.India-Asia collision during early-middle Eocene was a mega tectonic event. Apart from initiating the Himalayan orogeny and the eastward strike-slip extrusion of the Indochina block from the Southeast Asian continental collage along the Ailao Shan — Red River shear zone, it also caused early-mid Eocene continental-flood-basalt activity in the Himalayan foreland basin. Indian continent's post-collisional indentation-induced syntaxial buckling of Asian continental collage at its eastern end possibly caused late Paleogene highly potassic magmatism around the Gongha syntaxial area that was located close to the sutured margin of South China continent with Indochina block at the outer fringe of Namche Barwa syntaxis. These magmatic bodies are soon after left-laterally displaced by the Ailao Shan — Red River shear zone. The nature and chemistry of magma at these two settings indicate that both groups result from similar petrogenetic and tectonic processes representing deep-seated melts due to mantle decompression. Some deep faults produced at the edge of flexed Indian continental lithosphere and responsible for the development of the foreland basin may have produced continental-flood-basalt and related magma by decompressional melting of enriched sub-continental mantle. The site-specific location and time sequence of magmatism from the marginal parts of South China continent and located at the outer fringe of Namche Barwa syntaxis are strongly significant. It suggests that these magmatic bodies may also be genetically related to the India-Asia collision process and indentation-induced syntaxial buckling of upper mantle beneath the marginal parts of the South China rigid continent.     

共轭被动大陆边缘的基本类型及其特征

随着被动大陆边缘勘探的需求日益增加,为了更好的概括全球共轭被动大陆边缘的基本特征,本文试图在广泛调研全球具有代表性的12对大陆边缘的基础上,从大地构造背景、裂解时限、空间变化3个方面,系统总结12对共轭被动大陆边缘,进而得到4种基本类型：伊比利亚—纽芬兰型、加蓬—巴西南部型、新斯科舍—摩洛哥型、几内亚湾—巴西东北部型。伊比利亚—纽芬兰型是最常见且分布最广泛的类型,具有板缘造山带型、窄边缘型、长裂谷期型特征,地壳厚度及沉积物厚度小。结构呈明显分段性特征,裂谷时间充足,地幔剥露并发生蛇纹石化。加蓬—巴西南部型以板缘造山带型为主,具有窄边缘型、中裂谷期型特征,沉积厚度大,盆地发育大型高角度正断层控制沉积,并发育丰富的盐构造,边缘与古缝合带不重合。新斯科舍—摩洛哥型以板缘造山带型为主,具有宽边缘型、中裂谷期型特征,具有不对称裂解模式和洋盆生长模式,地壳结构和沉积物在共轭边缘呈现明显不对称性;发育反转构造,生长断层,走滑断层等多种类型构造。几内亚湾—巴西东北部型以板缘非造山带型为主,具有窄边缘型、短裂谷期型特征,发育多个转换边缘盆地,受张剪性的深大断层控制,地壳厚度及沉积物厚度的变化很大,具有裂谷—剪切边缘过渡特征。     

The final rifting evolution at deep magma-poor passive margins from Iberia-Newfoundland: a new point of view

In classical rift models, deformation is either uniformly distributed leading to symmetric fault bounded basins overlying stretched ductile lower crust (e.g. pure shear McKenzie model) or asymmetric and controlled by large scale detachment faulting (simple shear Wernicke model). In both cases rifting is considered as a mono-phase process and breakup is instantaneous resulting in the juxtaposition of continental and oceanic crust. The contact between these two types of crusts is often assumed to be sharp and marked by a first magnetic anomaly; and breakup is considered to be recorded as a major, basin wide unconformity, also referred to as breakup unconformity. These classical models, are currently challenged by new data from deep rifted margins that ask for a revision of these concepts. In this paper, we review the pertinent observations made along the Iberia-Newfoundland conjugate margins, which bear the most complete data set available from deep magma-poor margins. We reevaluate and discuss the polyphase nature of continental rifting, discuss the nature and significance of the different margin domains and show how they document extreme crustal thinning, retardation of subsidence and a complex transition into seafloor spreading. Although our study is limited to the Iberia-Newfoundland margins, comparisons with other margins suggest that the described evolution is probably more common and applicable for a large number of rifted margins. These new results have major implications for plate kinematic reconstructions and invite to rethink the terminology, the processes, and the concepts that have been used to describe continental rifting and breakup of the lithosphere.     

Ar–Ar ages of intrusions in East Greenland: Rift-to-drift transition over the Iceland hotspot

Sixteen ⁴⁰Ar–³⁹Ar ages are presented for alkaline intrusions to appraise prolonged post-breakup magmatism of the central East Greenland rifted margin, the chronology of rift-to-drift transition, and the asymmetry of magmatic activity in the Northeast Atlantic Igneous Province. The alkaline intrusions mainly crop out in tectonic and magmatic lineaments orthogonal to the rifted margin and occur up to 100 km inland. The area south of the Kangerlussuaq Fjord includes at least four tectonic lineaments and the intrusions are confined to three time windows at 56–54 Ma, 50–47 Ma and 37–35 Ma. In the Kangerlussuaq Fjord, which coincides with a major tectonic lineament possibly the failed arm of a triple junction, the alkaline plutons span from 56 to 40 Ma. To the north and within the continental flood basalt succession, alkaline intrusions of the north–south trending Wiedemann Fjord–Kronborg Gletscher lineament range from 52 to 36 Ma.

We show that post-breakup magmatism of the East Greenland rifted margin can be linked to reconfiguration of spreading ridges in the Northeast Atlantic. Northwards propagation of the proto-Kolbeinsey ridge rifted the Jan Mayen micro-continent away from central East Greenland and resulted in protracted rift-to-drift transition. The intrusions of the Wiedemann Fjord–Kronborg Gletscher lineament are interpreted as a failed continental rift system and the intrusions of the Kangerlussuaq Fjord as off-axis magmatism. The post-breakup intrusions south of Kangerlussuaq Fjord occur landward of the Greenland–Iceland Rise and are explained by mantle melting caused first by the crossing of the central East Greenland rifted margin over the axis of the Iceland mantle plume (50–47 Ma) and later by uplift associated with regional plate-tectonic reorganization (37–35 Ma). The Iceland mantle plume was instrumental in causing protracted rift-to-drift transition and post-breakup tholeiitic and alkaline magmatism on the East Greenland rifted margin, and asymmetry in the magmatic history of the conjugate margins of the central Northeast Atlantic.     

On sheared passive continental margins

Studies in intra-continental and intra-oceanic shear zones reveal structures that may be developed during the formation of a sheared passive continental margin.During the intra-continental shear stage of margin development, rapid vertical movement of the crust may occur resulting in small, tectonically-active basins containing thick sedimentary sequences. At deeper levels in the continental crust, more plastic deformation may lead to a zone of strongly sheared rocks that widens downwards. The tectonic fabric in this zone may exert some control over the subsequent development of the continent-ocean transition under the influence of regional stresses.The thermal event related to asthenosphere upwelling at sheared margins is a transient one and thus of less effect than the event on rifted margins. Nevertheless, following the event the cooling and contraction of oceanic crust against the continent may throw the oceanic crust into tension and lead to normal, block faulting in the oceanic regions analogous to the faulting seen in oceanic fracture zones. The subsidence of oceanic crust as it ages at the margin will either drag down the adjacent continental crust or, more likely, cause the oceanic crust to slip down by normal faulting along the continent-ocean boundary. The kinds of compressional features observed in oceanic fracture zones may also occur at sheared margins.     

Denudation of the Côte d'Ivoire-Ghana transform continental margin from apatite fission tracks

Apatite fission track analysis of samples from the shoulder (marginal ridge) of the Côte d'Ivoire-Ghana transform continental margin reveal a cooling of the margin between 85 and 65 Ma for the central and eastern parts of the ridge. All samples were heated in situ during sedimentary burial with a temperature >120 °C, except for two samples located in the eastern part which were heated between 105 and 120 °C. For the first time, age/depth diagram along a transform margin shows a shape involving erosion starting at the bottom of the continental slope, then stepping backwards towards the edge of the slope. This retrogressive erosion can result from the deepening of the lithospheric plate sliding along the transform margin, from thick continental crust to thin continental crust, and finally to oceanic crust. This process could be at the origin of the shoulder uplift by flexural response to the important crustal discharge (>2 km).     

Crustal structure and transform margin development south of Svalbard based on ocean bottom seismometer data

The Barents Sea is located in the northwestern corner of the Eurasian continent, where the crustal terrain was assembled in the Caledonian orogeny during Late Ordovician and Silurian times. The western Barents Sea margin developed primarily as a transform margin during the early Tertiary. In the northwestern part south of Svalbard, multichannel reflection seismic lines have poor resolution below the Permian sequence, and the early post-orogenic development is not well known here. In 1998, an ocean bottom seismometer (OBS) survey was collected southwest to southeast of the Svalbard archipelago. One profile was shot across the continental transform margin south of Svalbard, which is presented here. P-wave modeling of the OBS profile indicates a Caledonian suture in the continental basement south of Svalbard, also proposed previously based on a deep seismic reflection line coincident with the OBS profile. The suture zone is associated with a small crustal root and westward dipping mantle reflectivity, and it marks a boundary between two different crystalline basement terrains. The western terrain has low (6.2–6.45 km s⁻¹) P-wave velocities, while the eastern has higher (6.3–6.9 km s⁻¹) velocities. Gravity modeling agrees with this, as an increased density is needed in the eastern block. The S-wave data predict a quartz-rich lithology compatible with felsic gneiss to granite within and west of the suture zone, and an intermediate lithological composition to the east. A geological model assuming westward dipping Caledonian subduction and collision can explain the missing lower crust in the western block by subduction erosion of the lower crust, as well as the observed structuring. Due to the transform margin setting, the tectonic thinning of the continental block during opening of the Norwegian-Greenland Sea is restricted to the outer 35 km of the continental block, and the continent–ocean boundary (COB) can be located to within 5 km in our data. Distinct from the outer high commonly observed on transform margins, the upper part of the continental crust at the margin is dominated by two large, rotated down-faulted blocks with throws of 2–3 km on each fault, apparently formed during the transform margin development. Analysis of the gravity field shows that these faults probably merge to one single fault to the south of our profile, and that the downfaulting dominates the whole margin segment from Spitsbergen to Bjørnøya. South of Bjørnøya, the faulting leaves the continental margin to terminate as a graben 75 km south of the island. Adjacent to the continental margin, there is no clear oceanic layer 2 seismic signature. However, the top basement velocity of 6.55 km s⁻¹ is significantly lower than the high (7 km s⁻¹) velocity reported earlier from expanding spread profiles (ESPs), and we interpret the velocity structure of the oceanic crust to be a result of a development induced by the 7–8-km-thick sedimentary overburden.     

Observations on the processes of sedimentary basin formation at the margins of Southern Africa

Three variants of Atlantic-type continental margin border Southern Africa. On the west is a rifted margin with a rift phase no more than 50 m.y. in length (180–130 m.y. ago). Sedimentary basin formation was by upbuilding of a sediment terrace during the rift phase and the 30 m.y. following, with outbuilding of the terrace dominant during the Cainozoic. Little downwarping of the oceanic crust occurred but the continent—ocean transition zone appears to be wide.To the south of South Africa is an extensive sheared margin. Basin formation began here in mid-Triassic times with intermontane deposition. Local increase in lower crustal density appears to have accompanied subsidence. Truncation of the basins occurred 130–2100 m.y. ago and in places detrital influx was trapped behind a marginal fracture ridge. No continental rise sedimentary apron and characteristic deep structure were formed in these places. A ‘welding’ of the continental edge appears to have taken place.East of 30° E a complex continental margin with a protracted rift phase exists. From Triassic to Cretaceous times sedimentary basin formation was controlled by an E-W tensional stress regime resulting in N-S horsts and grabens. This was accompanied by vol-canicity and crustal thinning. Other stress systems may have prevailed during continental break-up in the Cretaceous while today the region is seismically active and the tensional stress assumed to be E-W. Following break-up sedimentary basins in Natal Valley and Mozambique Channel encroached southwards.     

The structure of the lower crust at the Argentine continental margin, South Atlantic at 44°S

It is well established that the Argentine passive margin is of the rifted volcanic margin type. This classification is based primarily on the presence of a buried volcanic wedge beneath the continental slope, manifested by seismic data as a seaward dipping reflector sequence (SDRS). Here, we investigate the deep structure of the Argentine volcanic margin at 44°S over 200 km from the shelf to the deep oceanic Argentine Basin. We use wide-angle reflection/refraction seismic data to perform a joint travel time inversion for refracted and reflected travel times. The resulting P-wave velocity-depth model confirms the typical volcanic margin structure. An underplated body is resolved as distinctive high seismic velocity (v_p up to 7.5 km/s) feature in the lower crust in the prolongation of a seaward dipping reflector sequence. A remarkable result is that a second, isolated body of high seismic velocity (v_p up to 7.3 km/s) exists landward of the first high-velocity feature. The centres of both bodies are 60 km apart. The high-velocity lower-crustal bodies likely were emplaced during transient magmatic–volcanic events accompanying the late rifting and initial drifting stages. The lateral variability of the lower crust may be an expression of a multiple rifting process in the sense that the South Atlantic rift evolved by instantaneous breakup of longer continental margin segments. These segments are confined by transfer zones that acted as rift propagation barriers. A lower-crustal reflector was detected at 3 to 5 km above the modern Moho and probably represents the lower boundary of stretched continental crust. With this finding we suggest that the continent–ocean boundary is situated 70 km more seaward than in previous interpretations.     

Structure and evolution of an obliquely sheared continental margin: Rio Muni, West Africa

Oblique-shear margins are divergent continental terrains whose breakup and early drift evolution are characterized by significant obliquity in the plate divergence vector relative to the strike of the margin. We focus on the Rio Muni margin, equatorial West Africa, where the ca. 70-km-wide Ascension Fracture Zone (AFZ) exhibits oblique–slip faulting and synrift half-graben formation that accommodated oblique extension during the period leading up to and immediately following whole lithosphere failure and continental breakup (ca. 117 Ma). Oblique extension is recorded also by strike–slip and oblique–slip fault geometry within the AFZ, and buckling of Aptian synrift rocks in response to block rotation and local transpression. Rio Muni shares basic characteristics of both rifted and transform margins, the end members of a spectrum of continental margin kinematics. At transform margins, continental breakup and the onset of oceanic spreading (drifting) are separate episodes recorded by discrete breakup and drift unconformities. Oceanic opening will proceed immediately following breakup on a rifted margin, whereas transform and oblique-shear margins may experience several tens of millennia between breakup and drift. Noncoeval breakup and drift have important consequences for the fit of the equatorial South American and African margins because, in reconstructing the configuration of conjugate continental margins at the time of their breakup, it cannot be assumed that highly segmented margins like the South Atlantic will match each other at their ocean–continent boundaries (OCBs). Well known ‘misfits’ in reconstructions of South Atlantic continental margins may be accounted for by differential timing of breakup and drifting between oblique-shear margins and their adjacent rifted segments.     

The canadian atlantic margin: A passive continental margin encompassing an active past

The continental margins of Atlantic Canada described in this paper show the effects of plate tectonic motions since Precambrian time and thus represent an ideal natural laboratory for geophysical studies and comparisons of ancient and modern margins. The Grenville Province shows vestiges of Helikian sedimentation on a pre-existing continental block beneath which there may have been southeastward late-Helikian subduction resulting in collision between the Grenville block and the continental block comprised of the older shield provinces to the north. The Grenville block was subsequently split in Hadrynian time along an irregular line so that the southeastern edge of the Grenville exhibited a series of promontories and re-entrants similar to those seen at the present Atlantic continental margin of North America. That margin, which had a passive margin history perhaps comparable with that of the present Atlantic margin, was separated by the lapetus ocean from the Avalon zone whose Precambrian volcanism has been attributed both to that associated with an island arc and with intra-cratonic rifting. However, the lapetus ocean appears to have been subducted in early Paleozoic time with a southeastward dip beneath the Avalon zone, leaving exposures of oceanic rocks in place as in Notre Dame Bay, or transported onto Grenville basement as at Bay of Islands.Plate motions proposed for Devonian and Carboniferous time are numerous, but resulted in the welding of the Meguma block to the Avalon zone of New Brunswick and northern Nova Scotia, extensive faulting within Atlantic Canada which can be correlated with contemporaneous European faulting and extensive terrestrial sedimentation within the fault zones. Graben formation, continental sedimentation and basaltic intrusion in the Triassic represent the tensional prelude to the Jurassic opening of the present Atlantic Ocean.This Jurassic opening produced a rifted margin adjacent to Nova Scotia and a transform margin along the southern Grand Banks. The width of the ocean-continent transition across the transform margin (approx. 50 km) is narrower than for the rifted margin (approx. 100 km). The eastern part of the transform margin is associated with a complex Cretaceous (?) volcanic province of seamounts and basement ridges showing evidence of subsidence. The western portion of the transform margin is non-volcanic, adjacent to which lies the 350 km wide Quiet Magnetic Zone floored by oceanic crust.Development of the margin east of Newfoundland was more complicated with continental fragments separated from the shelf by deep water basins underlain by foundered and atypically thin continental crust. Although thin, the crust appears unmodified, the similarities between the crustal sections of the narrow Flemish Pass and the wide Orphan Basin suggesting that the thinning is not simply due to stretching. The Newfoundland Basin shows evidence for two-stage rifting between the Grand Banks and Iberia with both lateral separation and rotation of Spain, leaving a wide zone of transitional crust in the south. The overall pattern of variations in crustal section for the margin east of Newfoundland is comparable with that of the British margin against which it is located on paleogeographical reconstructions.The major sedimentary unconformities on the shelves (such as the Early Cretaceous unconformity on the Grand Banks) reflect uplift accompanying rifting. Tracing of the sedimentary horizons across the shelf edge is complicated by paleocontinental slopes, which separate miogeocline and eugeocline depositional environments. The subsidence of the rifted margins is primarily due to cooling of the lithosphere and to sediment loading. The subsidence due to cooling has been shown to vary linearly with (time) , similar to the depth—age behaviour of oceanic crust. The consequent thermal history of the sediments is favourable for hydrocarbon generation where other factors do not preclude it.     

P-wave velocity structure of the margin of the southeastern Tsushima Basin in the Japan Sea using ocean bottom seismometers and airguns

The Tsushima Basin is located in the southwestern Japan Sea, which is a back-arc basin in the northwestern Pacific. Although some geophysical surveys had been conducted to investigate the formation process of the Tsushima Basin, it remains unclear. In 2000, to clarify the formation process of the Tsushima Basin, the seismic velocity structure survey with ocean bottom seismometers and airguns was carried out at the southeastern Tsushima Basin and its margin, which are presumed to be the transition zone of the crustal structure of the southwestern Japan Island Arc. The crustal thickness under the southeastern Tsushima Basin is about 17 km including a 5 km thick sedimentary layer, and 20 km including a 1.5 km thick sedimentary layer under its margin. The whole crustal thickness and thickness of the upper part of the crust increase towards the southwestern Japan Island Arc. On the other hand, thickness of the lower part of the crust seems more uniform than that of the upper part. The crust in the southeastern Tsushima Basin has about 6 km/s layer with the large velocity gradient. Shallow structures of the continental bank show that the accumulation of the sediments started from lower Miocene in the southeastern Tsushima Basin. The crustal structure in southeastern Tsushima Basin is not the oceanic crust, which is formed ocean floor spreading or affected by mantle plume, but the rifted/extended island arc crust because magnitudes of the whole crustal and the upper part of the crustal thickening are larger than that of the lower part of the crustal thickening towards the southwestern Japan Island Arc. In the margin of the southeastern Tsushima Basin, high velocity material does not exist in the lowermost crust. For that reason, the margin is inferred to be a non-volcanic rifted margin. The asymmetric structure in the both margins of the southeastern and Korean Peninsula of the Tsushima Basin indicates that the formation process of the Tsushima Basin may be simple shear style rather than pure shear style.