多消浪室局部开孔沉箱防波堤反射特性的迭代解析研究

基于势流理论，对多消浪室局部开孔沉箱防波堤的反射特性进行解析研究。研究中采用开孔墙处的二次压力损失边界条件，可以直接考虑波高对于开孔墙处能量损失的影响。利用匹配特征函数展开法和迭代方法得到当前问题的解析解。收敛性验证表明，迭代计算和级数解均具有良好的收敛性。该解析解的计算结果与分区边界元的数值计算结果一致，并且与已有的试验结果符合良好。通过算例分析，研究开孔沉箱防波堤反射系数的主要影响因素。结果表明：与单消浪室开孔沉箱防波堤相比，多消浪室开孔沉箱防波堤可以在更宽的波浪频率范围内保持低反射；增大开孔墙的开孔率，有利于降低多消浪室开孔沉箱防波堤的反射系数；当开孔墙的开孔率沿着入射波方向依次递减时，多消浪室开孔沉箱防波堤的反射系数较小。本文所建立的解析模型简单可靠，可用于工程初步设计中分析开孔沉箱防波堤的水动力性能。     

Model Study of Permeable Caisson Breakwater with Slanting Slabs

- This paper describes the design of a permeable caisson breakwater with slanting slabs (Types I and 11) and presents some preliminary experimental results, together with relevant figures and tables. Analysis is made of the reflection coefficient, transmission coefficient, acting wave pressures, water jetting at the crest of the breakwater, and wave overtopping. Experiments show conclusively that this type of breakwater has the advantages of light dead weight, good wave-absorbing performance, low coefficients of reflection and transmission, and small wave overtopping.     

双消浪室局部开孔沉箱防波堤反射特性的理论与试验研究

双消浪室局部开孔沉箱防波堤具有低反射、结构受力小、适宜较大水深和工程造价低等优点。为明确双消浪室局部开孔沉箱水动力特性的主要影响因素,采用理论分析和物理模型试验相结合的方法,对规则波和不规则波作用下双消浪室局部开孔沉箱防波堤的反射特性进行研究。基于势流理论,建立规则波和不规则波对局部开孔沉箱防波堤作用的三维解析解,采用二次压力损失边界条件考虑沉箱开孔墙对波浪运动的影响,利用周期性边界条件考虑防波堤结构沿长度方向的周期性变化。开展相应规则波和不规则波物理模型试验,验证理论模型的合理性。通过算例分析,研究不同波浪要素和结构参数对防波堤反射特性的影响。研究表明:双消浪室局部开孔沉箱相对消浪室宽度取值为0.08~0.20,沉箱前墙开孔率大于后墙开孔率时,防波堤在较大波浪频率范围内消波效果显著;当前后墙的开孔率相等时,防波堤反射系数的最小值随着开孔率增大而减小。     

基于SPH方法的开孔沉箱比尺效应研究

由于在前壁上设置了尺寸较小的孔,开孔沉箱受流体黏性力作用显著,依照弗劳德数相似准则设计模型存在比尺效应。为揭示比尺效应,建立了模拟波浪与开孔沉箱相互作用的光滑粒子流体动力学(SPH)模型。其中流体运动由连续性方程和Navier-Stokes方程控制,固壁边界由改进的动力边界粒子施加。模型收敛性通过分析不同粒子分辨率下的波浪反射系数得到,模型精度通过比较计算与理论波浪反射系数证明。使用经过验证的SPH模型,计算并比较了不同几何比尺和开孔率下开孔沉箱附近的涡量场、箱体外侧的波面时程曲线和波浪反射系数。结果表明,随着模型几何比尺的减小,开孔沉箱受到偏大的流体黏性力,致使更多波能在湍流运动中耗散,进而减小了波浪反射系数并降低了箱体外侧的波面高度。     

Reflection of irregular waves from perforated-wall caisson breakwaters

An analytical model has been developed that predicts the reflection of irregular waves normally incident upon a perforated-wall caisson breakwater. To examine the predictability of the developed model, laboratory experiments have been conducted for the reflection of irregular waves of various significant wave heights and periods impinging upon breakwaters having various wave chamber widths. For frequency-averaged reflection coefficients, though the overall agreement is fairly good between measurement and calculation, the model somewhat over-predicts the reflection coefficients at larger values, and under-predicts at smaller values. The model also underestimates the energy loss coefficients as wave reflection becomes larger. These differences occur because the model neglects the evanescent waves near the breakwater, which increase the energy loss at the perforated wall. The frequency-averaged reflection coefficient shows a minimum when the wave chamber width is approximately 0.2 times the significant wavelength, and it decreases with increasing wave steepness. Finally, it is shown that the reflection of irregular waves from a perforated-wall caisson breakwater depends on the wave frequency, so that the reflected wave spectrum shows a frequency dependent oscillatory behavior.     

波浪在Jarlan型开孔潜堤上的运动

The wave motion over a submerged Jarlan-type breakwater consisting of a perforated front wall and a solid rear wall was investigated analytically and experimentally. An analytical solution was developed using matched eigenfunction expansions. The analytical solution was confirmed by previously known solutions for single and double submerged solid vertical plates, a multidomain boundary element method solution, and experimental data. The calculated results by the analytical solution showed that compared with double submerged vertical plates, the submerged Jarlan-type perforated breakwater had better wave-absorbing performance and lower wave forces. For engineering designs, the optimum values of the front wall porosity, relative submerged depth of the breakwater, and relative chamber width between front and rear walls were 0.1–0.2, 0.1–0.2, and 0.3–0.4, respectively. Interchanging the perforated front wall and solid rear wall may have no effect on the transmission coefficient. However, the present breakwater with a seaside perforated wall had a lower reflection coefficient.     

深水工况下弧面胸墙沉箱堤的反射形态分析

为推广应用新型弧面胸墙沉箱堤,结合模型试验和数值模拟对比分析了深水工况下弧面胸墙沉箱堤和削角胸墙沉箱堤的反射形态。波面和波压的数值结果与试验数据吻合良好,验证了数值方法的有效性。反射系数表明,入射波浪在与弧面胸墙沉箱堤相互作用过程中的能量损耗最小,其反射强于削角胸墙沉箱堤。波面和流速包络图显示,两种堤型均在堤前形成了部分立波系统,腹点和节点以四分之一波长的距离增量交替出现,胸墙和直立部分产生的反射波存在相位差,导致初始腹点的位置向海侧偏移。弧面胸墙沉箱堤前叠合波的相位差影响最小,腹点包络高度最大,节点包络高度最小,反射效应最明显。两种堤型前中下层水流的周期平均速度均较小且对称,表明底床泥沙不会产生趋势性输移,但迎浪基床上方的环流系统可能引起局部冲刷。相对而言,弧面胸墙沉箱堤前的环流强度最弱,更有利于冲刷防护。     

Simplified analytical solutions for wave interaction with absorbing-type caisson breakwaters

Simplified analytical solutions are presented to model the interaction of linear waves with absorbing-type caisson breakwaters, which possess one, or two, perforated or slotted front faces which result in one, or two, interior fluid regions (chambers). The perforated/slotted surfaces are idealized as thin porous plates. Energy dissipation in the interior fluid region(s) inside the breakwater is modelled through a damping function. Under the assumption of potential flow and linear wave theory a boundary-value problem may then be formulated to describe wave interaction with the idealized structure. A solution to this simplified problem may be obtained by an eigenfunction expansion technique and an explicit analytical expression may be obtained for the reflected wave height. Using the experimental work of previous authors, damping coefficients are determined for both single and double chamber absorbing-type caisson breakwaters. Based on the damping for a single perforated-wall breakwater, a methodology is proposed to enable the estimation of the damping coefficients for a breakwater with two chambers. The theoretical predictions of the reflection coefficients for the two-chamber structures using the present model are compared with those obtained from laboratory experiments by other authors. It is found that the inclusion of the damping in the interior fluid region gives rise to improved agreement between theory and experiment.     

Interaction Between Waves and A Comb-Type Breakwater

The characteristics of wave transmission, reflection and energy dissipation of comb-type caisson breakwaters are studied through laboratory physical model tests. Regular and irregular waves, with a wide range of wave heights and periods and a constant water depth, are considered. Different dimensions of each portion of the comb-type caisson breakwater are tested. Empirical formulae for calculating the reduction coefficient k, which is the ratio of horizontal wave force on unit length of the comb-type breakwater to that on unit length of the vertical wall breakwater, and for calculating the reflection coefficient of waves k, are obtained from the measurements. The comb-type caisson breakwater has been found to be very efficient in dissipating incident wave energy and in reducing wave reflection, and has already been used for the construction of an island breakwater in the Dayao Bay of Dalian Port, Liaoning Province, China. Compared with the cost of a common caisson breakwater, about 24. 5% of the investm     

Dynamic pressures and forces exerted on impermeable and seaside perforated semicircular breakwaters due to regular waves

The semicircular breakwater (SBW) is a composite breakwater consisting of a semicircular caisson resting on a rubble mound. The SBW function as a barrier dissipates the incident wave energy and creates tranquillity on its leeside. The dynamic pressures due to regular waves exerted on seaside perforated SBWs with 7 and 11% of exposed surface area with perforations were measured. The measured pressures are compared with those exerted on impermeable SBWs. In addition, the forces exerted on the caisson alone are measured. The reflection coefficient, measured total forces on the caisson of the models, and the pressures are presented as functions of relative water depth. The effect of the water depth and the percentage of perforations on the above stated variables are examined, details of which are reported in this paper.     

Wave interaction with a perforated wall breakwater with a submerged horizontal porous plate

This study examines the hydrodynamic performance of a new perforated-wall breakwater. The breakwater consists of a perforated front wall, a solid back wall and a submerged horizontal porous plate installed between them. The horizontal porous plate enhances the stability and wave-absorbing capacity of the structure. An analytical solution based on linear potential theory is developed for the interaction of water waves with the new proposed breakwater. According to the division of the structure, the whole fluid domain is divided into three sub-domains, and the velocity potential in each domain is obtained using the matched eigenfunction method. Then the reflection coefficient and the wave forces and moments on the perforated front wall and the submerged horizontal porous plate are calculated. The numerical results obtained for limiting cases are exactly the same as previous predictions for a perforated-wall breakwater with a submerged horizontal solid plate [Yip, T.L., Chwang, A.T., 2000. Perforated wall breakwater with internal horiontal plate. Journal of Engineering Mechanics ASCE 126 (5), 533–538] and a vertical wall with a submerged horizontal porous plate [Wu, J.H., Wan, Z.P., Fang, Y., 1998. Wave reflection by a vertical wall with a horizontal submerged porous plate. Ocean Engineering 25 (9), 767–779]. Numerical results show that with suitable geometric porosity of the front wall and horizontal plate, the reflection coefficient will be always rather small if the relative wave absorbing chamber width (distance between the front and back walls versus incident wavelength) exceeds a certain small value. In addition, the wave force and moment on the horizontal plate decrease significantly with the increase of the plate porosity.     

消浪室宽度对可渗明基床开孔沉箱消浪性能影响研究

开孔沉箱是将传统沉箱的前壁开孔,使沉箱前的入射波浪与反射波浪非同相位叠加,达到消能目的。消浪室是开孔沉箱的重要特征结构,其宽度对开孔沉箱的消浪性能具有重要影响。针对可渗明基床开孔沉箱,赋予消浪室宽度以较大的变化范围,开展专项物模试验,研究探讨了在规则波与不规则波作用下,相对消浪室宽度对可渗明基床开孔沉箱前波高反射系数的影响规律,发现反射系数随相对消浪室宽度的增加呈减小—增大—减小的振荡特性,这一发现有别于前人的研究成果,对工程中开孔沉箱消浪室结构的优化设计具有借鉴意义。同时,对试验工况进行数值模拟和解析计算,以物模试验值为标准,评价两种方法在研究相对消浪室宽度对开孔沉箱波高反射系数影响时的规律把握能力及计算精度,对工程中应用这两种方法给出相关建议。     

Wave reflection from perforated-wall caisson breakwaters

Analytical models for predicting wave reflection from a perforated-wall caisson breakwater have been developed. Most of the existing models deal with the case in which the waves are normally incident to the caisson lying on a flat sea bottom. In the present paper, using the Galerkin-eigenfunction method, an analytical model is developed that can predict the reflection coefficient of a perforatedwall caisson mounted on a rubble mound foundation when waves are obliquely incident to the breakwater at an arbitrary angle. The developed model is compared with other theoretical results and hydraulic experimental data.     

Calculation of Wave Pressure and Pressure Spectrum for Perforate-Pipe Breakwater

Standing waves are formed due to the reflection when waves meet vertical wall,thereforestrong structures are needed to keep the wall stability under the serious wave attack.For the improvementof the working condition and increase of the stability of the wall,the lower reflecting breakwaters have at-tracted close attention Reports mostly from Japanese researchers are often concerned with the wall ofcaisson equipped with open windows.In this paper a kind of hollow-pipe perforated breakwater is exam-ined which waves may partially perforate into the harbour basin.The wave in front of the wall can onlyform partial standing wave and wave force is reduced obviously.And the theoretical calculation of waveforce and analysis of wave force spectrum are all derived.Comparison between the results from theoreticalcalculation and hydraulic modeling shows reasonable agreement.     

斜向波与带填料开孔板式防波堤相互作用的研究

基于线性势流理论,对斜向波与消浪室内带部分填料的开孔板式防波堤结构的相互作用进行了理论研究.利用匹配特征函数展开法给出了开孔防波堤结构反射系数和波浪力系数的理论计算方法,在极限情况下的计算结果与已有结果一致.利用数值算例分析了开孔结构反射系数和波浪力系数的主要影响因素.增加消浪室内填料厚度通常可以降低开孔墙结构的波浪力系数,加大结构的反射系数.随着波浪入射角度的增加,带填料防波堤结构的反射系数值先减小,达到最小值后又单调增加.     

The force of oblique incident wave on the breakwater with a partially perforated wall

1 IntroductionRecently breakwaters with perforated front wallshave been widely used. The use of perforated break-waters mainly has two advantages. Firstly, wave forcesacting on the whole structure can be divided into twoparts on two different walls with a phase difference.To select the distance between the two plates suitably,the total wave force on the whole structure can bemaintained at a low level. Secondly, waves will dissi-pate when they transmit over a porous medium. Thus,the reflection…     

Wave transmission by overtopping due to random waves

Experimental studies of wave transmission by overtopping for a smooth impermeable breakwater with 1:1.5 slope under both regular and random waves were conducted. A resulting relationship between the transmission coefficient (determined by wave height and wave period) and a breakwater height above mean water level normalized with the height of wave run-up measured directly by capacity wave meter is reported. Meanwhile, their discrepancies in both regular and random waves are also discussed in this study. The authors find also that the transmitted significant wave period by overtopping of random waves may be much longer than those of the incoming wave. This characteristic is especially prominent and probably creates the oscillation phenomenon in the wave basin at the back of breakwater when the breakwater height (above mean water level) to water depth ratio is greater than 0.23 and the incoming wave period is longer than 8 sec.     

Core made of geotextile sand containers for rubble mound breakwaters and seawalls: Effect on armour stability and hydraulic performance

A systematic armour stability and the hydraulic performance, including wave reflection, wave transmission, experimental study in the twin-wave flumes of Leichtweiss-Institute (LWI) is performed on a geocore breakwater and a conventional rubble mound breakwater in order to comparatively determine the wave run-up and wave overtopping. The geocore breakwater consists of a core made of sand-filled geotextile containers (GSC) covered by an armour made of rock. The geocore is more than an order of magnitude less permeable than the quarry run core of a conventional breakwater. As expected, the core permeability substantially affects the armour stability on the seaside slope, the wave transmission and the wave overtopping performance. Surprisingly, however, wave reflection and hydraulic stability of the rear slope are less affected. Formulae for the armour stability and hydraulic performance of the geocore breakwater are proposed, including wave reflection, transmission, run-up and overtopping.     

带横隔板局部开孔沉箱在斜向波作用下的受力研究

基于线性势流假定,对斜向波作用下带横隔板局部开孔沉箱防波堤的水平波浪力进行了理论研究。给出了开孔沉箱法向水平力和横隔板受力的理论计算方法,在极限情况下波浪力的计算结果与文献中的已有结果一致。利用数值算例分析了开孔沉箱总水平力的主要影响因素。开孔沉箱法向总水平力的减小主要集中于结构上半部分波浪影响范围以内。增加单个开孔沉箱的长度有利于减小结构所受总水平波浪力。当波浪入射角或沉箱前开孔墙孔隙影响系数幅值较大时,开孔沉箱横隔板上总水平力的最大值要超过相应的沉箱法向总水平力,此时要注意横隔板的强度问题。