Evidence of mantle-rooted fluids and multi-level circulation ore-forming dynamics: A case study from the Xiadian gold deposit, Shandong Province, China

Metallogensis of the Xiadian gold deposit in Shandong Province has been a question under dispute for a long time. There are many points such as metamorphic hydrothermal, magamatic hydrothermal and meteoric water. Detailed study shows that mantle-rooted fluids were involved in the ore-forming processes. Evidence for this argumentation comes from: (1) discordogenic fault; (2) intersecting and accompanying of basic veins and lodes; (3) geochemistry of stable isotopes; (4) geochemistry of fluid inclusions; and (5) multi-level circulation and exchanging of mantle-rooted fluids. Based on the characteristics of the circulation system of mantle-rooted fluids and its close relation to magmatic hydrothermal fluids and meteoric water, ore-bearing fluids are divided into three subsystems: (1) C-H-O-rich fluid circulation subsystem in mantle, (2) Si-rich fluid circulation subsystem in the middle and lower crust; and (3) S-rich fluid circulation subsystem in shallow and surface crust. Ore-forming functions of these subsystems are controlled respectively by their different geodynamic settings.     

Evidence of mantle-rooted fluids and multi-level circulation ore-forming dynamics: A case study from the Xiadian gold deposit,Shandong province,China

Metallogensis of the Xiadian gold deposit in Shandong Province has been a question under dispute for a long time. There are many points such as metamorphic hydrothermal, magamatic hydrothermal and meteoric water. Detailed study shows that mantle-rooted fluids were involved in the ore-forming processes. Evidence for this argumentation comes from: (1) discor-dogenic fault; (2) intersecting and accompanying of basic veins and lodes; (3) geochemistry of stable isotopes; (4) geochemistry of fluid inclusions; and (5) multi-level circulation and exchanging of mantle-rooted fluids. Based on the characteristics of the circulation system of mantle-rooted fluids and its close relation to magmatic hydrothermal fluids and meteoric water, ore-bearing fluids are divided into three subsystems: (1) C-H-O-rich fluid circulation subsystem in mantle, (2) Si-rich fluid circulation subsystem in the middle and lower crust; and (3) S-rich fluid circulation subsystem in shallow and surface crust. Ore-forming functions of these subsystems are controlled respectively by their different geodynamic settings.     

The hydrothermal karstification and its effect on Ordovician carbonate reservoir in Tazhong uplift of Tarim Basin,Northwest China

With a detailed study on petrology, mineralogy and geochemistry of some important Ordovician carbonate well core samples in Tazhong uplift of Tarim Basin, the distinguishing symbols of hydrothermal karstification are first put forward as the phenomena of rock hot depigmentation, hot cataclasm and the appearance of typical hydrothermal minerals such as fluorite, barite, pyrite, quartz and sphalerite. The main homogenization temperatures of primary fluid inclusions in fluorite are from 260 to 310°C, indicating the temperature of hydrothermal fluid. The fluid affected the dissolved rocks and showed typical geochemistry features with low contents of Na and Mg, and high contents of Fe, Mn and Si. The ratio of ³He/⁴He is 0.02R _a, indicating the fluid from the typical continental crust. The hydrothermal fluid karstification pattern may be described as follows: the hot fluid is from the Permian magma, containing dissolving ingredients of CO₂ and H₂S, and shifts along fault, ruptures and unconformity, and dissolves the surrounding carbonates while it flows. The mechanism of hydrothermal karstification is that the mixture of two or more fluids, which have different ion intensity and pH values, becomes a new unsaturated fluid to carbonates. The hydrothermal karstification is an important process to form hypo-dissolved pinholes in Ordovician carbonates of Tazhong uplift of Tarim Basin, and the forming of hydrothermal minerals also has favorable influence on carbonate reservoirs.

     

Geochemistry of ore-forming fluids and geological significance of the Kuoerzhenkuola gold field in Xinjiang, China

The Kuoerzhenkuola gold field (including the Kuo- erzhenkuola and the Buerkesidai gold deposits), lo- cated 68 km east of Jimunai County in northern Xing- jiang, China, is an important component of the Sawuer gold belt which is the eastward extending part of the Zarma-Sawur gold-copper belt in Kazakhstan. Some studies are concerned with the geology of the gold ores[1―3], the associated volcanic rocks[4], radiogenic isotope[5―8], and the ore-forming environment[8]. Most researchers inferr…     

Geochemistry of ore-forming fluids and geological significance

The Kuoerzhenkuola gold field (including the Kuoerzhenkuola and the Buerkesidai gold deposits) is the most important one in the Sawuer gold belt, northern Xinjiang, China. Isotopic studies including D, O, He, C, S, Pb and Sr reveal that the ore-forming fluids of the Kuoerzhenkuola and the Buerkesidai deposits shared the same source: the water of ore fluids was magmatic water and minor meteoric water; the mineralizers and ore materials derived mainly from mantle beneath the island arc, and partially from crust. The ore-forming fluids of two deposits are a mixture of mantle-derived fluids incorporated by crust-derived fluid, and meteoric water. Based on these results, combined with the consideration of the tectonic setting and geological features, we suggest that the two gold deposits in the Kuoerzhenkuola gold field, Sawur gold belt share the same genesis, and are volcanogenic hydrothermal gold deposits occurring in the same caldera.     

The hydrothermal karstification and its effect on Ordovician carbonate reservoir in Tazhong uplift of Tarim Basin,Northwest China

With a detailed study on petrology, mineralogy and geochemistry of some important Ordovician carbonate well core samples in Tazhong uplift of Tarim Basin, the distinguishing symbols of hydrothermal karstification are first put forward as the phenomena of rock hot depigmentation, hot cataclasm and the appearance of typical hydrothermal minerals such as fluorite, barite, pyrite, quartz and sphalerite. The main homogenization temperatures of primary fluid inclusions in fluorite are from 260 to 310°C, indicating the temperature of hydrothermal fluid. The fluid affected the dissolved rocks and showed typical geochemistry features with low contents of Na and Mg, and high contents of Fe, Mn and Si. The ratio of ³He/⁴He is 0.02R _a, indicating the fluid from the typical continental crust. The hydrothermal fluid karstification pattern may be described as follows: the hot fluid is from the Permian magma, containing dissolving ingredients of CO₂ and H₂S, and shifts along fault, ruptures and unconformity, and dissolves the surrounding carbonates while it flows. The mechanism of hydrothermal karstification is that the mixture of two or more fluids, which have different ion intensity and pH values, becomes a new unsaturated fluid to carbonates. The hydrothermal karstification is an important process to form hypo-dissolved pinholes in Ordovician carbonates of Tazhong uplift of Tarim Basin, and the forming of hydrothermal minerals also has favorable influence on carbonate reservoirs.     

Fluid circulation at Stromboli volcano (Aeolian Islands, Italy) from self-potential and CO2 surveys

This work addresses the study of fluid circulation of the Stromboli island using a dense coverage of self-potential (SP) and soil CO₂ data. A marked difference exists between the northern flank and the other flanks of the island. The northern flank exhibits (1) a typical negative SP/altitude gradient not observed on the other flanks, and (2) higher levels of CO₂. The general SP pattern suggests that the northern flank is composed of porous layers through which vadose water flows down to a basal water table, in contrast to the other flanks where impermeable layers impede the vertical flow of vadose water. In the Sciara del Fuoco and Rina Grande–Le Schicciole landslide complexes, breccias of shallow gliding planes may constitute such impermeable layers whereas elsewhere, poorly permeable, fine-grained pyroclastites or altered lava flows may be present. This general model of the flanks also explains the main CO₂ patterns: concentration of CO₂ at the surface is high on the porous north flank and lower on the other flanks where impermeable layers can block the upward CO₂ flux. The active upper part of the island is underlain by a well-defined hydrothermal system bounded by short-wavelength negative SP anomalies and high peaks of CO₂. These boundaries coincide with faults limiting ancient collapses of calderas, craters and flank landslides. The hydrothermal system is not homogeneous but composed of three main subsystems and of a fourth minor one and is not centered on the active craters. The latter are located near its border. This divergence between the location of the active craters and the extent of the hydrothermal system suggests that the internal heat sources may not be limited to sources below the active craters. If the heat source strictly corresponds to intrusions at depth around the active conduits, the geometry of the hydrothermal subsystems must be strongly controlled by heterogeneities within the edifice such as craters, caldera walls or gliding planes of flank collapse, as suggested by the correspondence between SP–CO₂ anomalies and structural limits. The inner zone of the hydrothermal subsystems is characterized by positive SP anomalies, indicating upward movements of fluids, and by very low values of CO₂ emanation. This pattern suggests that the hydrothermal zone becomes self-sealed at depth, thus creating a barrier to the CO₂ flux. In this hypothesis, the observed hydrothermal system is a shallow one and it involves mostly convection of infiltrated meteoric water above the sealed zone. Finally, on the base of CO₂ degassing measurements, we present evidence for the presence of two regional faults, oriented N41° and N64°, and decoupled from the volcanic structures.     

Geochemistry of volcanic and hydrothermal gases of Mutnovsky volcano,Kamchatka: evidence for mantle,slab and atmosphere contributions to fluids of a typical arc volcano

We report chemical compositions (major and trace components including light hydrocarbons), hydrogen, oxygen, helium and nitrogen isotope ratios of volcanic and geothermal fluids of Mutnovsky volcano, Kamchatka. Several aspects of the geochemistry of fluids are discussed: chemical equilibria, mixing of fluids from different sources, evaluation of the parent magmatic gas composition and contributions to magmatic vapors of fluids from different reservoirs of the Kamchatkan subduction zone. Among reactive species, hydrogen and carbon monoxide in volcanic vapors are chemically equilibrated at temperatures >300°C with the SO₂-H₂S redox-pair. A metastable equilibrium between saturated and unsaturated light hydrocarbons is attained at close to discharge temperatures. Methane is disequilibrated. Three different sources of fluids from three fumarolic fields in the Mutnovsky craters can be distinguished: (1) magmatic gas from a large convecting magma body discharging through Active Funnel, a young crater with the hottest fumaroles (up to 620°C) contributing ~80% to the total volcanic gas output; (2) volcanic fluid from a separate shallow magma body beneath the Bottom Field of the main crater (96–280°C fumaroles); and (3) hydrothermal fluid with a high relative and absolute concentrations of CH₄ from the Upper Field in the main crater (96–285°C fumaroles). The composition of the parent magmatic gas is estimated using water isotopes and correlations between He and other components in the Active Funnel gases. The He-Ar-N₂ systematics of volcanic and hydrothermal fluids of Mutnovsky are consistent with a large slab-derived sedimentary nitrogen input for the nitrogen inventory, and we calculate that only ~1% of the magmatic N₂ has a mantle origin and <<1% is derived from the arc crust.     

Evolution of oceanic gabbros from DSDP Leg 82: influence of the fluid phase on metamorphic crystallizations

Gabbro breccias were recovered from an anomalously shallow level of the ocean crust during DSDP Leg 82. The rocks display evidence of metamorphic crystallization related either to localized deformation or to hydrothermal circulation of a seawater-derived fluid under static conditions. Secondary phases consist of plagioclase, amphibole and minor clinopyroxene, ilmenite, sphene and chlorite. Petrological study indicates that deformation took place at high temperature, under anhydrous conditions, and was followed by hydrothermal circulation. The compositions of secondary minerals (i.e. strong zonations, presence of chlorine in amphiboles, varying compositions of secondary plagioclase) indicate that reactions of the gabbros with the fluids occurred at a low water/rock ratio. Relations between Cl, Na and K in amphiboles suggest penetration of at least two distinct fluids of different compositions. Metamorphic crystallization stopped when greenschist facies conditions were reached( 350°C), probably because hydrothermal circulation faded out.     

An oxygen isotope study of hydrothermal alteration in the Lake City caldera, San Juan Mountains, Colorado

A 23-m.y.-old, fossil meteoric-hydrothermal system in the Lake City caldera (11 × 14 km) has been mapped out by measuring δ ¹⁸O values of 300 rock and mineral samples. δ ¹⁸O varies systematically throughout the caldera, reaching values as low as −2. Great topographic relief, regional tilting, and variable degrees of erosion within the caldera all combine to give us a very complete section through the hydrothermal system, from the surface down to a depth of more than 2000 m. The initial δ ¹⁸O value of the caldera-fill Sunshine Peak Tuff was very uniform (+7.2 ± 0.1), making it easy to determine the exact amount of ¹⁸O depletion experienced by each sample during hydrothermal alteration. Also, we have excellent stratigraphic control on depths beneath the mid-Tertiary surface, quantitative information on mineralogical alteration products, and accurate data on the shape of the central resurgent intrusion, which was the principal ‘heat engine’ that drove the hydrothermal circulation. Major conclusions are: (1) Although pristine mid-Tertiary meteoric waters in this area had δ ¹⁸O −14, these fluids were ¹⁸O-shifted upward to about δ¹⁸O = −8 to −5 prior to entering the shallow convective system associated with the resurgent intrusive rocks. Although there was undoubtedly radial inflow toward the caldera from all directions, the highly fractured Eureka Graben, southwest of the caldera, was probably the principal source of recharge groundwater for the Lake City system. (2) Fluid flow within the caldera was dominated by three major categories of permeable zones: the porous megabreccia units (which dip outward from the resurgent dome), vertical fractures and faults related to resurgence, and the caldera ring fault itself. All of these zones exhibit marked ¹⁸O depletions, and they are also typically intensely mineralogically altered. (3) The resurgent intrusive stock and its contact metamorphic aureole of hornfels both experienced water/rock ratios lower than the permeable zones; however, they have similarly low δ ¹⁸O values because they were altered at higher temperatures. (4) Throughout the caldera, the δ ¹⁸O of Sunshine Peak Tuff decreases with increasing depth (about 6 per mil/km), indicative of a shallow thermal gradient, typical of a convective hydrothermal system. The near-surface portion of this gradient was controlled by the temperature drop associated with boiling in the uprising fluid. (5) Deeply circulating meteoric water rose along permeable ring fractures 3 to 5 km beneath the mid-Tertiary surface. These fluids were drawn into the shallow convective system through the lower, porous, megabreccia units. Near the resurgent intrusions, fluid flow was again directed upward where resurgence-related, near-vertical fractures intersect the megabreccia units.     

Stable and radiogenic isotopes as tracers for the origin,mixing and subsurface history of fluids in submarine shallow-water hydrothermal systems

The shallow-water hydrothermal system in Tutum Bay on the west side of Ambitle Island, Papua New Guinea provides us with an exceptional opportunity to study isotope systematics in a near shore setting. Compared to seawater, the hydrothermal fluids in Tutum Bay have lower values for δD, δ¹⁸O, δ¹³C, and ⁸⁷Sr and higher values for ³H, δ³⁴S(SO₄) and δ¹⁸O(SO₄). The δ¹⁸O and δD records for vents 1 and 4 indicate that fluid compositions remained stable over an extended period. Interpretation of isotope data clearly demonstrates the predominantly meteoric origin of Tutum Bay hydrothermal fluids, despite their location in a marine environment. δ¹⁸O and δD values are identical to mean average annual precipitation in eastern Papua New Guinea. The hypothesis that these fluids are a simple product of mixing between seawater and onshore hydrothermal fluids from the Waramung (W-1) and Kapkai (W-2) thermal areas has been rejected, because the observed δ³⁷Cl, ³H, δ³⁴S(SO₄) and δ¹⁸O(SO₄) values cannot be explained by a simple mixing model. The application of δ¹⁸O(SO₄) and δ¹³C thermometers in combination with ³H values corroborates the three-step model of Pichler et al. [Pichler, T., Veizer, J., Hall, G.E.M., 1999. The chemical composition of shallow-water hydrothermal fluids in Tutum Bay, Ambitle Island, Papua New Guinea and their effect on ambient seawater. Marine Chemistry 64 (3) 229–252], where (1) phase separation in the deep reservoir beneath Ambitle Island produces a high temperature vapor that rises upward and subsequently reacts with cooler ground water to form a low pH, CO₂-rich water of approximately 150–160 °C, (2) caused by the steep topography, this CO₂-rich fluid moves laterally towards the margin of the hydrothermal system where it mixes with the marginal upflow of the deep reservoir fluid. This produces a dilute chloride water of approximately 165 °C, and (3) possibly the entrainment of minor amounts of ground or seawater during its final ascent.     

Sources and genesis of the Chinkuashih Au-Cu deposits in northern Taiwan: constraints from Os and Sr isotopic compositions of sulfides

The Chinkuashih district at northern Taiwan hosts one of the largest Au deposits in the western Pacific gold province. Gold were precipitated from hydrothermal solutions as native gold or incorporated into sulfides at a temperature range of 200-350 °C. The sulfides in ore mines have ¹⁸⁷Os/¹⁸⁸Os ratios varying from 0.139 to 0.249. The positive ¹⁸⁷Os/¹⁸⁸Os-1/Os correlation is consistent with derivation from the hybrid fluids containing various proportions of mantle and crustal components. The crustal component was the meteoric water that had acquired its Sr and Os isotopic signatures from the local sedimentary formations and dacitic intrusions. The mantle component was the magmatic fluid segregated from the dacitic magma by fractional crystallization. Based on the ¹⁸⁷Os/¹⁸⁸Os-1/Os correlation, the hybrid fluids forming the Chinkuashih sulfides contained less than 30% magmatic fluid, except for one sulfide sample from Hsumei, which required >40% magmatic fluid. Compared to meteoric water, the magmatic fluid contained a higher Os content (130 times higher) and was enriched in Os relative to Sr with an Os/Sr ratio two orders higher than that of the crustal fluid. Consequently, the Os budget in the hybrid fluids was controlled by the magmatic fluid, although the meteoric water was volumetrically dominated. If gold and Os behave similarly in chemistry, the Chinkuashih gold deposits are of mantle origin and the area where sulfides with the greatest mantle Os signature may host undiscovered gold deposits. Finally, the ¹⁸⁷Os/¹⁸⁸Os ratios of sulfides show no relationship with the mineral assemblages of sulfides, implying that the sulfide mineral assemblages reflect local surfacial redox conditions rather than the chemical characteristics of parental fluids.     

S,C, O,H, and Pb isotopic studies for the Shuiyindong Carlin-type gold deposit,Southwest Guizhou,China: constraints for ore genesis

The Shuiyindong gold deposit is one of the most famous and largest Carlin-type gold deposits in China and is located in southwest Guizhou, in the eastern part of the Huijiabao anticline. The Shuiyindong's gold mineralization occurred in bioclastic limestone of the Permian Longtan Formation. Sulfur, carbon, hydrogen, oxygen, and lead isotopic compositions are reported in this paper. The properties and sources of ore-forming fluid have been discussed and a metallogenic model for the Shuiyindong gold deposit has been proposed. The d34 S values of stibnite, realgar, orpiment, pyrite from orebodies, and pyrite from quartz veins are similar to or slightly higher than the d34 S values of mantle sulfur. It is suggested that the sulfur of hydrothermal sulfides was likely of magmatic origin with minor heavy sulfur contributed from the country rocks. The measured d D values and calculated d18OH2 O values of inclusion fluid in quartz plotted within or below a magmatic hydrothermal fluid field far from the meteoric water line. This indicates that the ore-forming fluid for the main-stage gold mineralization could have been derived mainly from a magmatic source and mixed with a small amount of meteoric water. The carbon and oxygen isotopic compositions of calcites in the d18 O vs. d13 C diagram suggest that the CO2 in ore-forming fluid was derived from dissolution of bioclastic limestone and oxidation of sedimentary organic carbon in limestone. However, the d13 C values of ore-related calcites, which contain intergrown realgar and/or orpiment, are similar to those of mantle carbon. Although no igneous intrusive rock has been observed in the vicinity of the gold deposits, the possibility of mantle fluid integrated into the ore-forming fluid cannot be eliminated based on the d13 C values of ore-related calcites. The lead isotopes of sulfides are distributed near the growth curves of upper crust and orogenic belt in the plumbotectonic diagram. Their calculated Dc and Db values plotted within the magmatism field of crust-mantle subduction zone in the Dc- Db diagram. This suggests that the lead of sulfides has an intimate connection with magmatism. Our S, H, O, C, and Pb isotopic studies for the Shuiyindong Carlin-type gold deposit in Guizhou manifest a concordant possibility that the ore-forming fluid was mainly derived from magmatic fluid with minor contribution from the surrounding strata. With the integration of comprehensive geology and isotopic geochemistry, we have proposed a magmatic hydrothermal model for the origin of the Shuiyindong gold deposit.     

A theoretical study of hydrothermal convection and the origin of the ophiolitic sulphide ore deposits of Cyprus

Hydrothermal circulation of seawater has been suggested as a mass transport mechanism for the formation of sulphide ore deposits in the ophiolitic rocks of Cyprus. Since ophiolitic sequences are generally regarded as fragments of oceanic crust and upper mantle, hydrothermal circulation of a form inferred from geological observations on Cyprus may be analogous to that thought to occur in oceanic crust at spreading ridges. The hypothesis that ore deposits were formed in ascending plumes of hot, buoyant fluid is examined by considering thermal convection in a permeable medium. To match the inferred pattern of circulation, finite amplitude convection in a cylindrical geometry is studied using finite difference approximations. These results combined with available geological and geochemical data are applied to understand better the physical controls on mineralisation.A simple model for the formation of the hydrothermal ore deposits of Cyprus is discussed. The model is semi-quantitatively reasonable in terms of vertical fluid flow rate, thermal structure, permeability and basal heat flow, and predicts volumes of maximum mineralisation similar to those observed. Three factors are identified which were important in confining mineralisation to a small volume immediately beneath the sea water/rock boundary: (1) hot fluid was confined to a narrow core zone of a rising plume, (2) the upward fluid flux was greatest in this same core zone, and (3) significant temperature decrease occurred within a thin surface boundary layer.     

Chemical and isotopic signatures of the basement rocks from the Campi Flegrei geothermal field (Naples, southern Italy): inferences about the origin and evolution of its hydrothermal fluids

The Campi Flegrei (Naples, Campanian Plain, southern Italy) geothermal system is hosted by Quaternary volcanic rocks erupted before, during and after the formation of the caldera that represents one of the major structural features in the Neapolitan area. The volcanic products rest on a Mesozoic carbonate basement, cropping out north, east and south of the area. Chemical (major, minor and trace elements) and stable isotope (C, H, O) analyses were conducted on drill-core samples recovered from geothermal wells MF-1, MF-5, SV-1 and SV-3, at depths of ˜ 1100 to 2900 m. The study was complemented by petrographic and SEM examination of thin sections. The water which feeds the system is both marine and meteoric in origin. Mineral zonation typical of a high-temperature geothermal system exists in all the geothermal wells; measured temperatures in wells are as high as ˜ 400 °C. The chemical composition of the waters suggests the existence of two reservoirs: a shallow reservoir (depth < 2000 m) fed by seawater that boiled at 320 °C and became progressively diluted by steam-heated local meteoric water during its ascent; and a deeper reservoir (depth > 2000 m) of hypersaline water. The drill-cores are mainly hydrothermally altered volcanics of trachy-latitic affinity, but some altered pelites and limestones are also present. Published Na, Mg and K concentrations of selected geothermal waters indicate that the hydrothermal fluids are in equilibrium with their host rocks, with respect to K-feldspar, albite, sericite and chlorite. The measured δ¹⁸O_(SMOW) values of rocks range from +4.3 to + 16.5%. The measured δD_(SMOW) values range from − 79 to − 46%. The calculated isotopic composition of the fluids at equilibrium with the samples vary from + 1 to + 8.3%. δ¹⁸O and from − 52 to + 1%. δD. The estimated isotopic composition of the waters at equilibrium with the studied samples confirmed the existence of two distinct fluid types circulating in the geothermal system. The shallower has a marine water signature, while the deeper water has a signature consistent both with magmatic and meteoric origins. In the latter case, the recharge of this aquifer likely occurs at the outcrop of the Mesozoic Limestones surrounding the Campanian Plain; after infiltration, the water percolates through evaporitic layers, becoming hypersaline and D-depleted.     

Two series of copper-gold deposits in the middle and lower reaches of the Yangtze River area (MLYRA) and the hydrogen,oxygen, sulfur and lead isotopes of their ore-forming hydrothermal systems

Based on studies on the geological characteristics of the copper-gold deposits in the middle and lower reaches of the Yangtze River area (MLYRA) and their hydrogen, oxygen, sulfur and lead isotope compositions, it is concluded that there existed two series of copper-gold deposits. They are evolutional products of two ore-forming hydrothermal systems in different geodynamic settings and geological era. Series I is stratiform or stratabound copper-gold deposits. These deposits were formed by submarine exhalation and sedimentation of hydrothermal solutions in Hercynian tensional tectonic environment after bot brine ascending along contemporaneous faults and exhaled into the sea-floor. Series II consists of copper-gold deposits related to medium and acidic magmatic intrusions. Their mineralizations took place in Yanshanian in a tensional or a transitional period to the tensional tectonic environment from the composite of the tethys tectonic regime and the Paleo-Pacific ocean tectonic regime, as well as in the upper mantle doming and crustal thinning environment. Copper-gold deposits were formed from the hydrothermal fluids, mixtures of magmatic water and part of meteoric water, by complex water-rock interactions and coupling dynamic processes of transport-chemical reactions. Superposition is an important condition for the formation of the large-scale copper-gold ore deposits.

     

Rare-earth element and heavy-metal behaviour associated with the epithermal gold deposit on Lihir Island, Papua New Guinea

A thick sequence of alkaline intrusions and volcanic rocks underlies a Quaternary caldera on Lihir Island. The sequence is host to a still-active subaerial hydrothermal system and associated epithermal gold mineralization. Chondrite-normalized (La/Lu)_cn and (La/Sm)_cn ratios progressively increase up the alteration sequence from the potassic alteration zone, to the argillic zone to the advanced argillic zone. (Tb/Lu)_cn ratios only significantly increase in argillic and advanced argillic assemblages. Surface oxide alteration lithologies and acid sulphate water precipitates possess distinctly lower (La/Lu)_cn and (Tb/Lu)_cn ratios than the underlying subsurface alteration units. The changes in the REE, LREE and HREE fractionation trends from subsurface to surface alteration zones reflect the transition from a magmatic-hydrothermal, neutral chloride fluid regime at depth to acid sulphate meteoric waters in the upper portion of the alteration profile.Boiling of the LREE-Eu-enriched magmatic fluids occurred at a depth of at least 750 m. It is proposed that pronounced differential flow rates of the vapour and liquid phases and solution chemistry changes approximately above 300–350 m caused the incorporation of LREE and Eu into anhydrite-calcite veins and the deposition of LREE and HREE into wallrocks of upper parts of the potassic alteration unit. Condensation of the vapour phases into meteoric waters gave rise to low-temperature acid fluids that deposited large amounts of LREE within argillic and advanced argillic alteration units. This was also accompanied by HREE mobility due to large fluid volumes, acid fluid conditions and abundant sulphate complexes within the solutions. The HREE were either lost from the hydrothermal system or deposited in oxide assemblages and acid sulphate water precipitates.     

Crustal anorthosite formation by deep-seated hydrothermal circulation beneath fast-spreading axis: Constraints from chronological approach,Sr isotope,and fluid–chromite inclusion investigation

Hydrothermal circulation beneath the spreading axis plays a significant role in the exchange of energy and mass between the solid Earth and the oceans. Deep-seated hydrothermal circulation down to the crust/mantle boundary in the fast-spreading axis has been introduced by a number of studies regarding geological investigations and numerical models. In order to assess a reaction between hydrothermal fluid and host rock around the crust/mantle boundary, we conducted bulk trace element and Sr isotope analyses with a series of in situ investigations for crustal anorthosite, a reaction product between hydrothermal fluid and gabbro in the lowermost crustal section along Wadi Fizh, northern Oman ophiolite. In addition, we conducted titanite U–Pb isotope analyses to evaluate timing of the crustal anorthosite formation in the framework of the evolutional process of the Oman ophiolite. We estimated the formation age of the crustal anorthosite at 97.5 Ma ± 5.0 Ma, overlapping with the timing of the crust formation in the paleo spreading axis. The crustal anorthosite shows high-Th/U ratio (~2.5) and high-initial ⁸⁷Sr/⁸⁶Sr ratio (0.7050) due to seawater-derived hydrothermal fluid ingress into the precursor gabbro. With using analytical technique of micro-excavation at cryo-temperature, we detected Cl from a few micrometer-sized inclusion of aqueous fluid and chromite grains. The solubility of Cr was enhanced by complexation reactions with Cl in the hydrothermal fluid. Regarding reconstructed three-dimensional mass distribution of the inclusion and chromite composition, maximum Cr content of parental fluid was estimated at ~69 000 μg/g. The exceptionally high-Cr content was achieved locally by leaking of fluid and synchronous chromite crystallization during fluid entrapment. Presence of the deep-seated hydrothermal circulation could be assigned to the segment end, where cold seawater penetrates into the lowermost crust and extract heat along widely spaced network-like fluid channel.     

Time scale of hydrothermal water-rock reactions in Yellowstone National Park based on radium isotopes and radon

We have measured ²²⁴Ra (3.4 d), ²²⁸Ra (5.7 yr), and ²²⁶Ra (1620 yr) and chloride in hot spring waters from the Norris-Mammoth Corridor, Yellowstone National Park. Two characteristic cold-water components mix with the primary hydrothermal water: one for the travertine-depositing waters related to the Mammoth Hot Springs and the other for the sinter-depositing Norris Geyser Basin springs. The Mammoth Hot Springs water is a mixture of the primary hydrothermal fluid with meteoric waters flowing through the Madison Limestone, as shown by the systematic decrease of the (²²⁸Ra/²²⁶Ra) activity ratio proceeding northward. The Norris Geyser Basin springs are mixtures of primary hydrothermal water with different amounts of cold meteoric water with no modification of the primary hydrothermal (²²⁸Ra/²²⁶Ra) activity ratio. Using a solution and recoil model for radium isotope supply to the primary hydrothermal water, a mean water-rock reaction time prior to expansion at 350°C and supply to the surface is 540 years assuming that 250 g of water are involved in the release of the radium from one gram of rock. The maximum reaction time allowed by our model is 1150 years.     

Aqueous fluids derived from a subducting slab: Observed high 3He emanation and conductive anomaly in a non-volcanic region,Kii Peninsula southwest Japan

It has long been recognized that the Kii Peninsula in the southwest Japan arc is peculiar in a non-volcanic region, indicated by the presence of high temperature hot springs, high terrestrial heat flow and high ³He content in hot spring gases. Geophysical and geochemical studies were carried out to understand the geotectonic environment in the southern part of the Kii Peninsula. Most of the measured ³He / ⁴He ratios are similar or higher than air, indicating wide spread incorporation of mantle-derived helium into meteoric water. A region with rather high ³He / ⁴He ratios (> 4 R_A) on the west side of the Omine Mountains coincides with the occurrence of high temperature hot springs. A deep crustal resistivity structure across the Omine Mountains was imaged by wide-band magnetotelluric soundings. A 2-D inversion with N–S strike using both TM and TE modes reveals two conductors, one in the upper (3–7 km depth) and the other in lower crust (25–35 km depth) to the west of the Omine Mountains. The distribution of microearthquakes and low-frequency tremors, and the existence of seismic reflectors indicate that the large conductor in the lower crust is related to aqueous fluids derived from the Philippine Sea plate. The upper-crustal conductive zone may also reflect the aqueous fluids trapped in the upper crust, which are presumably derived from the subducting slab. Considering the occurrence of seismic events in the subducting slab beneath the southern Kii Peninsula, the aqueous fluids generated by dehydration of the slab mantle could plausibly include MORB-type helium derived from the residual lithospheric mantle. Therefore, the high temperature hot springs and high ³He emanations in hot spring gases and other geotectonic events in the southern Kii Peninsula may be due to heat flux and mantle-derived helium discharged from aqueous fluid in the upper crust.