判别碳酸盐岩是烃源岩还是储集岩的指标

<正> 在实际勘探中,碳酸盐岩既可作为烃源岩,也可作为储集岩存在。确定碳酸盐岩中含有的烃类是原生的,还是从它处运移而来的,这在勘探实践中有着指导意义。为此目的,许怀先等用岩石热解分析方法做了大量研究工作。结果表明岩石中原油的热蒸发烃高峰温度和干酪根热解烃高峰温度具有显著差异:干酪根热解产烃高峰温度 T_(max)为400～600℃;原油热蒸发烃最高峰温度 T_(max)为300～400℃。由此可以区分原油的热蒸发烃和干酪根的热解烃,并进一步判定当最高热解峰温 T_(max)>400℃时,该岩石为烃源岩,而当T_(max)<400℃时,则为储集岩。对干酪根热解的进一步研究表明,不同成熟度的干酪根在不同的热降解温度范围内的产烃量是不同的。低成熟度的干酪根在450～600℃范围内所产生的烃占热解烃的5%     

岩体结构对岩石爆破效果的影响

分析了爆破冲击波的传播特点，指出了对岩石破坏最大的是拉伸应力波，并对岩体结构对岩石爆破效果的影响进行了探讨。     

嵌岩扩底灌注桩及MRR型基岩扩底钻头

简要介绍了国内外扩底技术现状、扩底灌注桩的特点、ＭＲＲ型基岩扩底钻头的结构衣技术参数，结合工程实例对ＭＲＲ１０００钻头的使用效果进行了分析。     

Ayers Rock

For years the world's most famous inselberg was plagued by the deleterious effects of human activity. Now a massive investment, stimulated by the international tourist industry, has ensured preservation of the rock's unique geomorphological features and its fragile ecology.     

Micromechanical Modelling of Stress Waves in Rock and Rock Fractures

The goal of this paper is to simulate the interaction of stress waves and rock fractures in a particle micromechanical model. Stress waves travelling in fractured rock masses are slowed down and attenuated by natural heterogeneities, voids, microcracks and, above all, by faults and fractures. Considerable laboratory and theoretical investigation have uncovered the major aspects of this phenomenon, but models that cover the core mechanisms of the wave propagation in rock masses are necessary to investigate aspects of wave–fracture interaction, which are not completely clear, and in the future simulate full-scale real problems. The micromechanical model is based on the particle discrete element model that reproduces rock through a densely packed non-structured assembly of 2D disks with point contacts. The model of a hard rock core is developed and an irregular rock joint is generated at mid-height. A new contact constitutive model is applied to the particles in the joint walls. Numerical static joint compression tests are performed and a typical hyperbolic stress–displacement curve is obtained. Conditions for good quality wave transmission through non-jointed unorganized particulate media are determined, hybrid static–dynamic boundary conditions are established and plane waves are emitted into the compressed joint. The transmitted and reflected waves are extracted and analysed. Joint dynamic stiffness calculated according to the hypotheses of the Displacement Discontinuity Theory shows to increase with the static joint compression until the joint is completely closed. Still in its early stages of application, this rock micromechanical model enables the joint behaviour under static and dynamic loading to be analysed in detail. Its advantages are the reproduction of the real mechanics of contact creation, evolution and destruction and the possibility of visualizing in detail the joint geometry changes, which is hard to accomplish in the laboratory.     

Rock density study

Density of volcano-sedimentary complexes progressively rises going down the Paleozoic section and decreases in the Precambrian. Density of the intrusive rocks is determined largely by their composition. There seem to be lateral changes in rock density, correlative with surface relief of the crust, differences in intensity of metamorphism, and intensity of dislocation. The density differences may be related to those in the degree of weathering or in the conditions, nature and intensity of metamorphism. --Author.     

岩体损伤问题

从微观及宏观两方面对岩体损伤的意义及性质作了阐述,介绍了连续损伤力学中有关损伤变量的定义和量度,给出了韧性、脆性、疲劳与蠕变状态下的损伤演变方程。文内除了列举几种反映岩体软化及节理裂隙性质的损伤模型外,还介绍了细观与统计损伤模型。最后简要叙述了几种损伤测量方法,包括超声衰减技术、声发射以及现代光学技术。     

基于块体理论的多结构面控制下岩质边坡关键块体研究

岩质边坡具有不连续性、多变性及各向异性的特点,其稳定性很大程度上受边坡内部发育的多结构面的影响,表现为块体的不稳定性,因此,寻求对边坡稳定性造成不良影响的关键可动块体是一项重要课题。通过块体理论全空间赤平投影与矢量计算的方法,捕获关键块体,并通过矢量计算确定块体的运动方式,计算其稳定系数,证明了全空间赤平投影在确定可动块体上的简便性,其直观的图示能避免矢量法较为繁琐的计算步骤,而在可动块体运动形式的判别上,两者必须相辅相成。通过应用块体理论确定的关键块体相较于传统方法应用于岩坡稳定性分析时强调的“整体性”而更加侧重于边坡内部块体的“个体性”与“精准性”,突破了岩质边坡稳定性分析的模糊性问题,也使边坡防治更精准更具针对性。     

Magnetite-Fluorite Rock:A New Rock Type of Hot Water Sedimentation

The new type hot water sedimentary rock -- magnetite-fluorite rock occurs as quasi-layers in flat parts of contact zones between rock body and strata in Bamianshan of Changshan County, Zhejiang Province, China. The main mineral assemblage is fluorite＋magnetite＋cassiterite. The rock shows typical laminated structure and obvious mosaic texture. Its formation temperature is between 123℃-160℃, averaging at 142℃. The major chemical composition of the rock includes CaF2, SiO2, Al2O3, FeO, and Fe2O3; the high-content microelement association includes W, Sn, Be, Rb, Sr, S, and CI; and the total content of REE is low （∑REE between 35.34×10^-6-38.35×10^-6）, showing LREE enrichment type of distribution pattern. Diagenesis： driven by the tectonic stress, the formation water heated in the deep strata had moved along the fissures or fractures in strata and had extracted components from the strata on the way, and finally stagnated in the flat parts of contact zones between rock body and strata. With drop in temperature, magnetite and fluorite were separated from the hot water and precipitated alternately, forming this hot water sedimentary rock with new type mineralogical composition, typical laminated structure, obvious mosaic texture and sub-horizontal occurrence. The characteristics of the new type mineralogical composition, sedimentary tectonic environment and chemical composition are different from that of the well-known traditional hydrothermai sedimentary rocks.     

岩体结构对含煤岩系变形的控制作用

含煤岩系变形规律的研究,对煤炭资源评价和开采、煤矿瓦斯灾害预测、煤层气的可开发性评价具有指导意义。基于含煤岩系的岩体结构是控制其变形的基础因素这一前提,以岩体力学和分形几何学基本理论为指导,提出取决于岩石杨氏模量和泊松比的岩体强度因子和取决于岩层厚度的分形维数两个参数,以断层发育的安阳双全井田、褶皱发育的沁水盆地煤层气开发区及滑动构造发育的荥巩谷山井田为例,系统探讨了岩体结构对含煤岩系变形的控制作用。研究表明,低强度因子和厚层岩层较多的分形维数低值区,含煤岩系以韧性变形为主,多形成褶皱,煤体变形程度深,为瓦斯灾害严重区和煤层气难以开发区;高强度因子和厚层岩层较少的分形维数高值区,含煤岩系以脆性变形为主,多发育断层,构造煤难以区域展布,只分布在断层附近。可见含煤岩系变形不仅与岩体强度有关,而且受岩层厚度的控制。统计层段内刚性岩层的存在增加了岩体强度,岩层复杂程度的增加同样提高了岩体强度。岩体力学和分形几何学的引入,为煤岩体变形行为和程度的描述和预测提供了一种新途径。     

Magnetite-Fluorite Rock: A New Rock Type of Hot Water Sedimentation

The new type hot water sedimentary rock - magnetite-fluorite rock occurs as quasi-layers inflat parts of contact zones between rock body and strata in Bamiaushan of Changshan County,Zhejiang Province, China. The main mineral assemblage is fluorite magnetite cassiterite. The rockshows typical laminated structure and obvious mosaic texture. Its formation temperature is between123℃-160℃, averaging at 142℃. The major chemical composition of the rock includes CaF2, SiO2,Al2O3, FeO, and Fe2O3; the high-content microelement association includes W, Sn, Be, Rb, Sr, S, andCl; and the total content of REE is low (∑REE between 35.34x10-6-38.35x10-6), showing LREEenrichment type of distribution pattern. Diagenesis: driven by the tectonic stress, the formation waterheated in the deep strata had moved along the fissures or fractures in strata and had extractedcomponents from the strata on the way, and finally stagnated in the flat parts of contact zones betweenrock body and strata. With drop in temperature, magnetite and fluorite were separated from the hotwater and precipitated alternately, forming this hot water sedimentary rock with new typemineralogical composition, typical laminated structure, obvious mosaic texture and sub-horizontaloccurrence. The characteristics of the new type mineralogical composition, sedimentary tectonicenvironment and chemical composition are different from that of the well-known traditionalhydrothermai sedimentary rocks.     

The Rock of Gibraltar

Most people have heard of the Rock of Gibraltar, yet few know anything of its geology. Recent studies now interpret the Rock as a partly overturned mass of Jurassic limestone, thrust into position during continent-continent collision by about 15–20 million years ago, and shaped largely by shoreline processes active during Pleistocene tectonic uplift. The Rock's geology has implications for currently developing interpretations of the geological evolution of the western Mediterranean region and for the fast-growing development of Gibraltar's urban environment.     

岩石力学联锁咬合岩块结构稳定性分析

首次建立了岩石力学中的多种联锁咬合岩块结构模型,介绍了块体理论的进展,并采用改进的DDA（块体不连续变形分析）法对块体进行了稳定性分析。     

Discrete Element Modeling of Rock Fragmentation upon Impact in Rock Fall Analysis

A discrete element code has been used to simulate impact-induced rock fragmentation in rock fall analysis using a simplified impact model inspired by the theory of vibrations for foundations on elastic media. The impact velocity, the angle of incidence, pre-existing fractures, and the ground stiffness all play important roles in impact fragmentation. Based on the simulation results, impact fragmentation occurs locally at the impact zone without generating large fragments for a homogeneous rock block. Large fragments are generated only when there are open pre-existing fractures in the rock block or when there are fully persistent closed fractures. Softer ground tends to reduce the potential for impact fragmentation. Energy transformation and failure occur only during impact including approach and restitution stages. Friction energy loss accounts for most of the energy loss during the fragmentation process, while tensile cracking energy loss is not significant.     

粘弹-塑性岩体中衬砌与围岩的共同作用问题

在许多类型的岩层中(比如粘土质的沉积岩、岩盐以及其他较软弱的岩质等)地下洞室在开挖完成之后,其围岩的变形特性,强度特性以及整体的稳定性有明显的时间效应.因此,近年来在国内外的研究工作中已有不少人致力于时间因素对围岩稳定性影响的研究.