Morphologic,acoustic, and sedimentologic characteristics of the Magdalena Fan

The Magdalena Fan can be divided into: upper fan—1:60–1:110 gradients, channels with well-developed levees, generally several subbottom reflectors on 3.5-kHz records, and fine-grained sediments; middle fan—1:110–1:200 gradients, channels with very subdued levees, several to few subbottom reflectors on 3.5-kHz records, and chaotic and discontinuous reflections on multichannel seismic (MCS) records; lower fan—<1:250 gradients, small channels and relatively smooth seafloor, generally coarsegrained sediments, few or no subbottom reflectors on 3.5-kHz records, and flat continuous reflections on MCS records. In addition to the turbidity currents, slumping along the continental slope and elsewhere also influenced sedimentation in the fan.     

Holocene sedimentation history of the major fan valleys of Monterey fan

There are three major fan valleys on upper Monterey fan. Deep-tow geophysical profiles and 40 sediment cores provide the basis for evaluation of the sedimentation histories of these valleys. Monterey fan valley leads from Monterey canyon to a major suprafan and is bounded by levees that crest more than 400 m above the valley floor. The valley passes through a large z-bend or meander. Monterey East fan valley joins Monterey fan valley at the meander at about 150 m above the valley floor, and marks an earlier position of the lower Monterey fan valley. Ascension valley, a hanging contributary to the Monterey fan valley, appears to have once been the shoreward head of the lower part of the present Monterey fan valley. The relief of Monterey fan valley appears from deep-tow profiles to be erosional. The valley is floored with sand. Holocene turbidity currents do not overtop the levees 400 m above the valley floor, but do at times overflow and transport sand into Monterey East valley, producing a sandy floor. An 1100 m by 300 m dune field was observed on side scan sonar in Monterey East valley.Ascension fan valley was floored with sand during glacial intervals of lowered sea level, then was cut off from its sand source as sea level rose. A narrow (500 m), erosional, meandering channel was incised into the flat valley floor; the relief features otherwise appear depositional, with a hummocky topography perhaps produced in the manner of a braided riverbed. The sand is mantled by about 6 m of probable Holocene mud. Hummocky relief on the back side of the northwestern levees of both Ascension and Monterey valleys is characteristic of many turbidite valleys in the northeast Pacific. The hummocky topography is produced by dune-like features that migrate toward levee crests during growth.     

Controls on the development of valleys,canyons, and unconfined channel–levee complexes on the Pleistocene Slope of East Kalimantan,Indonesia

Shallow 3D seismic data show contrasting depositional patterns in Pleistocene deepwater slopes of offshore East Kalimantan, Indonesia. The northern East Kalimantan slope is dominated by valleys and canyons, while the central slope is dominated by unconfined channel–levee complexes. The Mahakam delta is immediately landward of the central slope and provided large amounts of sediments to the central slope during Pleistocene lowstands of sea level. In the central area, the upper slope contains relatively straight and deep channels. Sinuous channel–levee complexes occur on the middle and lower slope, where channels migrated laterally, then aggraded and avulsed. Younger channel–levee complexes avoided bathymetric highs created by previous channel–levee complexes. Levees decrease in thickness down slope. Relief between channels and levees also decreases down slope.North of the Mahakam delta, siliciclastic sediment supply was limited during the Pleistocene, and the slope is dominated by valleys and canyons. Late Pleistocene rivers and deltas were generally not present on the northern outer shelf. Only one lowstand delta was present on the northern shelf margin during the upper Pleistocene, and sediments from that lowstand delta filled a pre-existing slope valley complex and formed a basin-floor fan. Except for that basin-floor fan, the northern basin floor shows no evidence of sand-rich channels or fans, but contains broad areas with chaotic reflectors interpreted as mass transport complexes. This suggests that slope valleys and canyons formed by slope failures, not by erosion associated with turbidite sands from rivers or deltas. In summary, amount of sediment coming onto the slope determines slope morphology. Large, relatively steady input of sediment from the Pleistocene paleo-Mahakam delta apparently prevented large valleys and canyons from developing on the central slope. In contrast, deep valleys and canyons developed on the northern slope that was relatively “starved” for siliciclastic sediment.     

Morphologic, acoustic, and sedimentologic characteristics of the Magdalena Fan

The Magdalena Fan can be divided into: upper fan—1:60–1:110 gradients, channels with well-developed levees, generally several subbottom reflectors on 3.5-kHz records, and fine-grained sediments; middle fan—1:110–1:200 gradients, channels with very subdued levees, several to few subbottom reflectors on 3.5-kHz records, and chaotic and discontinuous reflections on multichannel seismic (MCS) records; lower fan—<1:250 gradients, small channels and relatively smooth seafloor, generally coarsegrained sediments, few or no subbottom reflectors on 3.5-kHz records, and flat continuous reflections on MCS records. In addition to the turbidity currents, slumping along the continental slope and elsewhere also influenced sedimentation in the fan. Margin setting represents fan and/or source area     

Morphology of the Ebro fan valleys from SeaMARC and sea beam profiles

The northern continental slope off the Ebro Delta has a badland topography indicating major slope erosion and mass movement of material that deposits sediment into a ponded lobe. The southern slope has a low degree of mass movement activity and slope valleys feed channel levee-complexes on a steep continental rise. The last active fan valley is V-shaped with little meandering and its thalweg merges downstream with the Valencia Valley. The older and larger inactive channel-levee complex is smoother, U-shaped, and meanders more than the active fan valley.     

Dynamic events near the upper and mid-fan boundary of the Bengal Fan

Bathymetric sections across the most recent valley just above and below the transition of upper to middle fan show a northward shift of the thalweg between the confines of the levees. This small-scale migration was followed by a levec break on the higher north side. Part of the bottom currents, which normally would have been contained within the levees, spilled over and spread laterally in a northward direction. This levee break caused a canyonward shift of the boundary between the upper and mid fan, and the diverted flow croded smaller valleys in the western part of the fan.     

Morphology and downslope sediment displacement in a deep-sea valley,the Valencia Valley (Northwestern Mediterranean)

The Valencia Valley is a Quaternary, 200 km long deep-sea valley in the Valencia Trough, Western Mediterranean Sea. A swathmapping survey approximately mid-way along the valley length, where the floor has an average gradient of 1:250 (0.2°), shows valley walls that rise 200 to 350 m above the valley floor, with slopes of 2 to 18°. Sediment forming the walls is undergoing retrogressive, upslope-directed slumping with increasing bedding disruption along steeper walls. The valley exhibits a winding course with steep outer and gentler inner walls around bends, and bedforms on the valley floor. Lateral migration around bends is less than 5 km and the valley is deeply entrenched into Quaternary-bedded sediments.     

Morpho-acoustic and sedimentologic characteristics of the Indus Fan

The upper Indus Fan is characterized by an average 1∶500 gradient, chanels with 100 m high levees, several continuous subbottom reflectors on 3.5-kHz records, and generally fine-grained sediments. Multichannel seismics show the levee complexes typified by overlapping wedge-shaped reflection sets and channel axis by high-amplitude discontinuous reflections. The middle fan has 1∶500–1∶1000 gradients and channels with ≈20 m high levees. The lower fan has gradients less than 1∶1000, channels with 8–20 m high levees, few or no subbottom reflectors on 3.5-kHz records, and high sand content. Besides the dominant unchannelized turbidity currents, channelized and overbank flows also played a significant role in the sedimentation of the lower fan. Margin setting represents fan and/or source area     

Morpho-acoustic and sedimentologic characteristics of the Indus Fan

The upper Indus Fan is characterized by an average 1∶500 gradient, chanels with 100 m high levees, several continuous subbottom reflectors on 3.5-kHz records, and generally fine-grained sediments. Multichannel seismics show the levee complexes typified by overlapping wedge-shaped reflection sets and channel axis by high-amplitude discontinuous reflections. The middle fan has 1∶500–1∶1000 gradients and channels with ≈20 m high levees. The lower fan has gradients less than 1∶1000, channels with 8–20 m high levees, few or no subbottom reflectors on 3.5-kHz records, and high sand content. Besides the dominant unchannelized turbidity currents, channelized and overbank flows also played a significant role in the sedimentation of the lower fan.     

Erosional and depositional patterns in the Valencia Channel mouth: An example of a modern channel-lobe transition zone

Recent deep-towed, high resolution sidescan sonar records and seismic profiles have been collected on the lower Valencia Fan (Northwestern Mediterranean). Three morphological zones, channelled, transition and unchannelled, have been recognized in the Valencia Channel mouth. Sonographs from the transition zone show a progresive transversal gradation from depositional to erosional bedforms. This asymmetry may be due to the lateral inputs of sediment flows from the Rhone deep-sea fan and to the effect of the Coriolis force, which could have diverted the flows to the southwest. Bedforms recorded in the study area include trains of starved ripples and dunes, sand ribbons, and fields of elongated scours. Most morphological features, bedforms and seismic characteristics of the Valencia Channel mouth are typical of channel-lobe transition zones.     

Erosional and depositional patterns in the Valencia Channel mouth: An example of a modern channel-lobe transition zone

Recent deep-towed, high resolution sidescan sonar records and seismic profiles have been collected on the lower Valencia Fan (Northwestern Mediterranean). Three morphological zones, channelled, transition and unchannelled, have been recognized in the Valencia Channel mouth. Sonographs from the transition zone show a progresive transversal gradation from depositional to erosional bedforms. This asymmetry may be due to the lateral inputs of sediment flows from the rhone deep-sea fan and to the effect of the Coriolis force, which could have diverted the flows to the southwest. Bedforms recorded in the study area include trains of starved ripples and dunes, sand ribbons, and fields of elongated scours. Most morphological features, bedforms and seismic characteristics of the Valencia Channel mouth are typical of channel-lobe transition zones.     

The Laurentian Fan: Sohm Abyssal Plain

The 0.5- to 2-km thick Quaternary Laurentian Fan is built over Tertiary and Mesozoic sediments that rest on oceanic crust. Two 400-km long fan valleys, with asymmetric levees up to 700-m high, lead to an equally long, sandy, lobate basin plain (northern Sohm Abyssal Plain). The muddy distal Sohm Abyssal Plain is a further 400-km long. The sediment supplied to the fan is glacial in origin, and in part results from seismically triggered slumping on the upper continental slope. Sandy turbidity currents, such as the 1929 Grand Banks earthquake event, probably erode the fan-valley floors; but thick muddy turbidity currents build up the high levees. Margin setting represents fan and/or source area     

The Bengal Fan: morphology, geometry, stratigraphy, history and processes

The Bengal Fan is the largest submarine fan in the world, with a length of about 3000 km, a width of about 1000 km and a maximum thickness of 16.5 km. It has been formed as a direct result of the India–Asia collision and uplift of the Himalayas and the Tibetan Plateau. It is currently supplied mainly by the confluent Ganges and Brahmaputra Rivers, with smaller contributions of sediment from several other large rivers in Bangladesh and India.The sedimentary section of the fan is subdivided by seismic stratigraphy by two unconformities which have been tentatively dated as upper Miocene and lower Eocene by long correlations from DSDP Leg 22 and ODP Legs 116 and 121. The upper Miocene unconformity is the time of onset of the diffuse plate edge or intraplate deformation in the southern or lower fan. The lower Eocene unconformity, a hiatus which increases in duration down the fan, is postulated to be the time of first deposition of the fan, starting at the base of the Bangladesh slope shortly after the initial India–Asia collision.The Quaternary of the upper fan comprises a section of enormous channel-levee complexes which were built on top of the preexisting fan surface during lowered sea level by very large turbidity currents. The Quaternary section of the upper fan can be subdivided by seismic stratigraphy into four subfans, which show lateral shifting as a function of the location of the submarine canyon supplying the turbidity currents and sediments. There was probably more than one active canyon at times during the Quaternary, but each one had only one active fan valley system and subfan at any given time. The fan currently has one submarine canyon source and one active fan valley system which extends the length of the active subfan. Since the Holocene rise in sea level, however, the head of the submarine canyon lies in a mid-shelf location, and the supply of sediment to the canyon and fan valley is greatly reduced from the huge supply which had existed during Pleistocene lowered sea level. Holocene turbidity currents are small and infrequent, and the active channel is partially filled in about the middle of the fan by deposition from these small turbidity currents.Channel migration within the fan valley system occurs by avulsion only in the upper fan and in the upper middle fan in the area of highest rates of deposition. Abandoned fan valleys are filled rapidly in the upper fan, but many open abandoned fan valleys are found on the lower fan. A sequence of time of activity of the important open channels is proposed, culminating with formation of the one currently active channel at about 12,000 years BP.     

The Laurentian Fan: Sohm abyssal plain

The 0.5- to 2-km thick Quaternary Laurentian Fan is built over Tertiary and Mesozoic sediments that rest on oceanic crust. Two 400-km long fan valleys, with asymmetric levees up to 700-m high, lead to an equally long, sandy, lobate basin plain (northern Sohm Abyssal Plain). The muddy distal Sohm Abyssal Plain is a further 400-km long. The sediment supplied to the fan is glacial in origin, and in part results from seismically triggered slumping on the upper continental slope. Sandy turbidity currents, such as the 1929 Grand Banks earthquake event, probably erode the fan-valley floors; but thick muddy turbidity currents build up the high levees.     

Downstream evolution of turbiditic channel complexes in the Pab Range outcrops (Maastrichtian,Pakistan)

The Pab Formation consists of deltaic and turbiditic sediments which were deposited during the Late Maastrichtian on the Indo-Pakistani passive margin. The margin geometry has been restored in the Pab Range from a regional transect 120 km long. Two superposed turbiditic systems onlap the slope carbonates and completely pinch-out southward. The lowest turbiditic system (Lower Pab) is a sand-rich basin floor fan, which consists of sand-rich channel complexes distally passing to lobes northward. This basin floor fan is overlain by a mud-rich slope fan formed during the subsequent sea-level rise, which drowned the shelf. The upper turbiditic system (Upper Pab) is a sand-rich slope fan, formed during the progradation of a deltaic system in the shelf setting. It consists of prograding tabular lobes passing upward to conglomeratic channels, and thins out northwards. The Lower Pab turbiditic system consists of three channel complexes (LP1, 2, 3) organised in a backstepping succession. Each channel complex has a multi-storey internal architecture, resulting from the amalgamation of several individual turbiditic channels. Five major facies associations have been determined in the LP3 channel complex. FA-1 corresponds to polygenic and monogenic debris-flows, FA-2 to high-density gravelly or sandy turbidites, FA-3 to by-pass deposits, FA-4 to thin-bedded turbidites (spill-over lobes and levees) and FA-5 to hemipelagites. The downstream evolution of the LP3 channel complex can be studied from canyon to mid-fan settings. Where it is confined in the canyon, the channel complex is 50 m thick and 1 km large, and shows a high sand/shale ratio. The development of overflow deposits is limited and occurs only at the top of the channel complex. At the canyon mouth, the channel complex is still deeply incised but overflow deposits start to expand laterally as a result of the decreased confinement. By-pass facies here are well-developed, and are related to hydraulic jump processes. In the mid-fan setting, the channel complex widens and the sand/shale ratio decreases. Erosion at the channel base is less developed, whereas internal and external levees are well-developed. Spill-over lobes form the last stage of the channel complex infill. The internal geometry of the channel complexes is a result of a complex interaction between lateral confinement, by-pass and lateral migration processes.     

Architecture and evolution of upper fan channel-belts on the Niger Delta slope and in the Arabian Sea

High-resolution multichannel 2-D and 3-D seismic data, primarily from upper fan reaches of near-seafloor channel-levee systems on the Niger Delta slope and in the Arabian Sea, reveal a high level of detail and architectural complexity. Several architectural elements are common to each system examined in this study. They include inner levees, outer levees, erosional fairways, channel-axis deposits, rotational slumps blocks, and mass transport deposits. Although the scale of individual systems varies significantly, similarities in first-order architectural elements and their configurations suggest that common depositional processes are involved regardless of scale differences.Most of the channel-levee systems examined in this study are characterized by a basal erosional fairway that is bordered by outer levees of varying thickness. Together these elements define the base and margins of the channel-belt, where channel-axis deposits and inner levees are the dominant architectural elements. Vertical, sub-vertical, and lateral stacking patterns of sinuous and/or meandering channels create seismic facies that range from narrow to wide zones of high amplitude reflections (HARs) with chaotic to continuous and shingled to horizontal reflections. Some HARs appear as isolated or stacked asymmetric to symmetric u- and v-shaped reflections, referred to here as channel-forms. Channel-belts evolve within the confines of the scalloped erosional fairway walls (flanked by outer levee), and are similar in morphology to meander-belts in fluvial systems, but commonly have a greater component of vertical aggradation. Detailed study of one particular channel-levee system on the Niger Delta slope shows a period of incision followed by three distinct phases of channel development during its aggradational history. Each fill phase corresponds to a different channel stacking architecture, planform geometry, and nature of terrace development, with important implications for reservoir architecture. In some cases, multiple phases of inner levee growth are observed, each intimately linked to the channel migration and aggradation history. Channel sinuosity evolves dynamically, with some meander loops undergoing periods of accelerated meander growth at the same time that others show little lateral migration.     

Navy Fan,California Borderland: Growth pattern and depositional processes

Navy Fan is a Late Pleistocene sand-rich fan prograding into an irregularly shaped basin in the southern California Borderland. The middle fan, characterized by one active and two abandoned “distributary” channels and associated lobe deposits, at present onlaps part of the basin slope directly opposite from the upper-fan valley, thus dividing the lower-fan/basin-plain regions into two separate parts of different depths. Fine-scale mesotopographic relief on the fan surface and correlation of individual turbidite beds through nearly 40 cores on the middle and lower fan provide data for evaluating the Late Pleistocene and Holocene depositional processes.     

Navy Fan, California Borderland: Growth pattern and depositional processes

Navy Fan is a Late Pleistocene sand-rich fan prograding into an irregularly shaped basin in the southern California Borderland. The middle fan, characterized by one active and two abandoned “distributary” channels and associated lobe deposits, at present onlaps part of the basin slope directly opposite from the upper-fan valley, thus dividing the lower-fan/basin-plain regions into two separate parts of different depths. Fine-scale mesotopographic relief on the fan surface and correlation of individual turbidite beds through nearly 40 cores on the middle and lower fan provide data for evaluating the Late Pleistocene and Holocene depositional processes. Margin setting represents fan and/or source area     

A Deep-sea Channel in the Northwestern Mediterranean Sea: Morphology and seismic structure of the Valencia Channel and its surroundings

The 400 km long Valencia Channel occupies the axis of the Valencia Trough in the Northwestern Mediterranean. Four different types of seismic reflection profiles were used to analyze the morphology and structure of the Valencia Channel with regard to the role played by both margins, Balearic and Iberian, of the Valencia Trough. From a detailed morphoseismic analysis of the Valencia Channel, its upper, middle, and lower courses can be characterized as follows: (1) in the upper course, tributaries are short and only slightly incised, with recent mass-transport deposits occurring on the adjacent continental slopes; (2) in the middle course, the channel deepens, and tributary valleys merge into it; and (3) the lower course begins after a sudden change in the direction of the channel, has a meandering path, is flanked by levees, and is fed by some valleys.During the Pliocene and Quaternary, at least four erosional and filling phases are observed in seismic profiles of the lower course of the Valencia Channel. The varying intensity of mass-transport processes and associated retrogressive slumping, which are related with fluctuations in sediment supply and relative sea-level changes, have played a major role in the formation, maintenance and deepening of the Valencia Channel. In addition to these sedimentary processes, a basement tectonic control and some morphostructural features affect the direction of the Valencia Channel locally.     

The Bulgheria canyon-fan: a small-scale proximal system in the eastern Tyrrhenian Sea (Italy)

The Bulgheria canyon-fan system in the eastern Tyrrhenian Sea displays well-developed, small-scale, fluvial-like features and has formed alongside the northern slope of the Sapri peri-Tyrrhenian basin. This study reveals, for the first time, the morphology and course of the present-day system as well as the buried elements based on a Digital Terrain Model and high-resolution seismic profiles interpretation. Two adjacent canyons (Infreschi and Luna) originate in the Cilento outer shelf at a short distance from each other and feed an intraslope basin fan through two main sub-parallel channels that run about 12 and 8 km, respectively. Channel and levee development seems to be controlled primarily by the local slope gradient and by Coriolis forces that induce a faster vertical growth of the right-side features, as is often observed in the Northern Hemisphere. Centrifugal forces, on the other hand, have induced episodic flow-stripping at the meander loops and bends, causing local destruction of the main channel levees rather than new levee growth at the outer bends. Overbank deposits are associated with overspill turbidite deposition in the mid fan where a topographic constraint occurs, whereas large-sediment, low-angle wave fields are mainly developed on the outer fan. Buried features and relict morphologies suggest that the Infreschi channel experienced at least two phases of re-incision since the final stages of the middle Pleistocene. Local re-adjustment of outer lobe growth due to channel avulsion and meander abandonment is possibly a consequence of relative base-level fluctuations. The sedimentary record of the mid and outer fan includes outrun mass wasting deposits from extensive failures of the Sapri slope. Indeed, a marked scar is present on the eastern side of the modern outer lobe that indicates the persistency of mass flow passages up to recent times. In addition to the environmental factors that are currently considered to cause canyon formation on the shelf margin, this study proposes the possibility that the head canyon branch close to the mainland was incised by massive and persistent underground freshwater flow from the adjacent aquifer when the sea-level was lower than at present.