藏南吉松铅锌矿流体包裹体特征及其地质意义

吉松铅锌矿床位于喜马拉雅造山带东部,矿体由石英-方解石-硫化物脉组成,主要受北东向断裂构造控制。矿石矿物组合为闪锌矿、方铅矿和少量磁黄铁矿、黄铜矿;脉石矿物包括石英、方解石、毒砂和黄铁矿等。矿床可划分为：Ⅰ.毒砂-黄铁矿-石英阶段;Ⅱ.磁黄铁矿-闪锌矿-方铅矿-黄铜矿-石英阶段;Ⅲ.石英-方解石-黄铁矿阶段;Ⅳ.表生氧化阶段。石英、方解石中包裹体以气液两相水包裹体为主,含少量CO₂包裹体和纯液相水包裹体。成矿流体特征为中低温度、低盐度、低密度,显微测温结果显示：Ⅰ 阶段的均一温度范围225~345 ℃,盐度为0.21%~11.93% NaCl eqv;Ⅱ 阶段的均一温度范围145~339 ℃,盐度为0.35%~13.26% NaCl eqv;Ⅲ 阶段的均一温度范围210~350 ℃,盐度为0.35%~15.31% NaCl eqv。流体包裹体特征表明成矿流体发生了沸腾作用,可能是矿质沉淀的主要原因。分析表明该矿床为中低温热液脉型铅锌矿床。     

延边地区小西南岔富金铜矿床的成矿机理:矿物流体包裹体和同位素的制约

小西南岔富金铜矿床是中国东部陆缘重要的热液矿床,由不同矿石品位和矿体特征的南山、北山两个矿段组成,矿化形式分别为脉状、细脉浸染状。流体包裹体研究表明:北山矿段均一温度为120~470℃,Ⅰ矿化阶段流体盐度为10.1%~20.0%NaCl eqv,Ⅱ、Ⅲ矿化阶段盐度变化大,为0.4%~45.5%NaCl eqv,流体气相成分为H_2O、CO_2、CH_4,少量N_2。南山矿段均一温度为150~450℃,Ⅰ成矿阶段盐度为4.0%~11.1%NaCl eqv,Ⅱ、Ⅲ矿化阶段盐度随着温度降低盐度逐渐减小,气相成分主要是H_2O、CO_2、CH_4;似斑状角闪花岗闪长岩石英内流体包裹体与南、北山矿段流体显示相近的均一温度范围(150~510℃)和气体成分,盐度4.9%~11.5%NaCl eqv与南山矿段Ⅰ成矿阶段流体相似。流体包裹体的显微测温、氢氧同位素,稀有气体同位素和Pb同位素结果表明南山矿段的成矿过程为幔源中低盐度流体在围岩裂隙中随着温度、压力降低以充填结晶作用为主而成矿;北山矿段成矿过程为幔源中低盐度流体发生沸腾作用后,与地壳流体混合,随后成矿流体以交代方式成矿,晚阶段两个矿区在大气水的混入作用下,北山矿段形成胶黄铁矿石英脉,南山矿段形成纯硫化物脉;似斑状角闪花岗闪长岩内流体包裹体特征反映了初始含矿流体属性,为中低盐度幔源岩浆热流体。     

大兴安岭北部十五里桥金矿床流体包裹体特征及矿床成因

十五里桥金矿床位于上黑龙江Au（Cu-Mo）成矿带内,上黑龙江盆地南缘、腰站断陷北缘与二十二站隆起南缘交接地带. 矿床可划分为4个成矿阶段：Ⅰ—脉状黄铁矿-石英阶段;Ⅱ—浸染状黄铁矿±黄铜矿-石英阶段;Ⅲ—浸染状黄铁矿±黄铜矿±闪锌矿±方铅矿-石英阶段;Ⅳ—少硫化物-碳酸盐阶段. 其中多金属硫化物-石英阶段为主成矿阶段. 流体包裹体研究表明,Ⅱ、Ⅲ阶段发育富气相和富液相型流体包裹体,Ⅱ阶段流体发生不混溶,均一温度介于283~394 ℃之间,盐度介于2.56%~7.99%（NaCl当量,质量分数）之间;Ⅲ阶段均一温度介于251~298 ℃,盐度介于2.56%~5.09%（NaCl当量,质量分数）,属于简单的NaCl-H₂O体系. H-O同位素指示成矿流体主要为大气降水;S同位素指示成矿物质主要来自深源岩浆硫. 十五里桥金矿床为火山岩容矿的浅成中温热液型矿床.     

蒙古国满都拉探矿区地质特征及流体包裹体研究

满都拉探矿区位于蒙古国南戈壁省满都拉苏木。矿区地表中元古界白云岩中出露大面积含孔雀石、蓝铜矿和辉铜矿的硅化蚀变带,含铜矿物与石英脉在空间上紧密共生,石英中的流体包裹体可能保留了原生成矿流体特征。为确定其成矿地质体和成因类型,指导后续找矿工作,本文对硅化蚀变带中的石英进行了流体包裹体研究。根据石英中包裹体的产状可将包裹体分为早晚两个阶段,早阶段富含CO2(C型)和水溶液(W型)包裹体,偶见含子矿物(S型)包裹体,流体均一温度为195~384℃,盐度为2.77%~21.37%Na Cl.eqv,反映了原生成矿流体的特征。晚阶段仅出现水溶液(W型)包裹体,流体均一温度集中在95~213℃,盐度为1.27%~12.63%Na Cl.eqv。流体由早阶段的中高温、中盐度、富CO2流体向晚阶段低温、低盐度、贫CO2流体演化。据此推测成矿流体可能为岩浆流体,流体形成深度大约在5.7 km以上。     

浙江建德铜矿流体包裹体研究

浙江建德铜矿(原名岭后铜矿)是20世纪60年代初期探明的中型铜矿,位于扬子板块和华夏板块结合带(即钦杭结合带)北东段。文中系统研究了建德铜矿主成矿期块状矿石石英中的流体包裹体。岩相学研究表明主要发育三类包裹体:包括富液相包裹体(I型),富气相包裹体(II型),以及含子晶包裹体(III型);显微测温结果显示:I类富液相包裹体加热后均一到液相,均一温度分布范围主要集中在280~340℃,流体包裹体盐度0.63~8.00 wt.%Na Cl eqv,II类富气相包裹体加热均一到气相,均一温度296~334℃,盐度1.22~2.00 wt.%Na Cl eqv的低盐度范围,III类含子晶包裹体,均一温度范围与II类包裹体基本相同,介于290~326℃,盐度则较高,介于31.87~38.16 wt.%Na Cl eqv。激光拉曼探针分析揭示,流体挥发分主要为水蒸气,同时部分包裹体气相组分中含有CO2、CH4、N2。II类与III类流体包裹体在视域内共存,且两者均一温度相似,盐度相差很大,表明强烈的流体沸腾作用发生。流体强烈沸腾作用是造成建德铜矿成矿物质沉淀富集的原因。成矿流体研究结合地质特征表明,建德铜矿是燕山期的矽卡岩型矿床而不是海西期的喷流沉积矿床。     

黑龙江省三矿沟矽卡岩型铁铜矿床流体包裹体研究

对黑龙江省三矿沟矽卡岩型铁铜矿床内花岗闪长岩中石英斑晶、硫化物阶段及石英-碳酸盐阶段的石英、方解石中流体包裹体的岩相学、显微测温学和显微激光拉曼光谱分析等的研究结果表明,流体包裹体有富液相、富气相和含子矿物多相包裹体3种类型;花岗闪长岩石英斑晶中的含子矿物多相包裹体均一温度均值为4320C,盐度在30.92 wt%～63.91 wt%NaCl eqv.之间,平均为52.96 wt%NaCl eqv.,代表了高温、高盐度岩浆流体;硫化物阶段形成的黄铜矿磁铁矿矿石中流体温度主要介于323～424℃之间,盐度介于8.95 wt%～62.51 wt%NaCl eqv.之间;硫化物阶段形成的黄铜矿矿石中流体温度主要介于333～441℃之间,盐度介于8.28 wt%～65.32 wt%NaCl eqv.之间;石英-碳酸盐阶段流体温度主要介于124～140℃之间,盐度介于1.65 wt%～4.34 wt%NaCl eqv.之间.铁铜矿石均形成于高温、高盐度阶段,以岩浆热液为主,在成矿晚期,由于大气降水的混合,形成了少量低温、低盐度流体,成矿流体以富Na、K、Ca、Cl-和CO~2_3-的高盐度流体为特征,主体属于NaCl-H_2O-CO_2-H_2S-CH_4体系.成矿流体在300～400℃区间内发生了强烈的沸腾作用,导致大量金属硫化物和少量金属氧化物沉淀,沸腾作用对三矿沟铁铜矿床的形成起到至关重要的作用.     

豫西银家沟硫铁多金属矿床流体包裹体和同位素特征

河南省银家沟硫铁多金属矿床位于华北克拉通南缘华熊地块内,是东秦岭地区最大的硫铁多金属矿床,以其硫铁储量大及共、伴生元素复杂区别于东秦岭其他以钼为主的矿床.成矿的全过程可以划分为矽卡岩期、硫化物期和表生期,包括磁铁矿阶段、脉状石英-辉钼矿阶段、石英-黄铁矿-黄铜矿-斑铜矿-闪锌矿阶段、网脉状石英辉钼矿阶段、石英绢云母-黄铁矿阶段、方解石-方铅矿闪锌矿阶段和玉髓褐铁矿阶段.流体包裹体研究表明,银家沟矿床主要发育气液两相水溶液包裹体(W型)、含CO2三相包裹体(C型)和含子矿物多相包裹体(S型).钾长花岗斑岩的石英斑晶中流体包裹体均一温度介于341～＞550℃之间,盐度介于0.4％～44.0％ NaCl eqv之间,属H2O-NaCl-CO2体系;脉状石英-辉钼矿阶段流体包裹体均一温度介于382～416℃之间,盐度介于3.6％～40.8％ NaCl eqv之间,属H2O-NaCl体系;石英-方解石-黄铁矿黄铜矿-斑铜矿-闪锌矿阶段流体包裹体均一温度介于318～436℃之间,盐度介于5.6％～42.4％ NaCl eqv之间,属H2O-NaCl体系;网脉状石英-辉钼矿阶段流体包裹体均一温度介于321～411℃之间,盐度介于6.3％～16.4％ NaCl eqv之间,属H2 O-NaCl体系;石英-绢云母黄铁矿阶段流体包裹体均一温度介于326～419℃之间,盐度介于4.7％～49.4％ NaCl eqv之间,属H2O-NaCl体系.银家沟矿床成矿流体主要为高温、高盐度流体,总体上属于H2O-NaCl±CO2体系.成矿热液的δ18 OH2O值为4.0‰～8.6‰,δ18 Dv-SMOW值为-64‰～-52‰,表明成矿流体来自岩浆水.矿石金属硫化物的δ18 SV-CDT值介于-0.2‰～6.3‰之间,平均为1.6‰,具深源硫特征,硫主要来自分异很差的由火成物质组成的下地壳,官道口群白云岩亦提供了部分重硫.矿床金属硫化物的206 Pb/204 Pb值介于17.331～18.043之间,207 Pb/204 Pb值变化于15.444～15.575之间,208 Pb/204 Pb值变化于37.783～38.236之间,总体上与银家沟岩体的铅同位素范围一致,暗示铅主要来自矿区内的燕山期中酸性岩体,地层在成矿过程中亦提供了少量物质.银家沟矿床属斑岩-矽卡岩型,形成于中生代EW向构造体制向NNE向构造体制转变阶段,成矿流体多期次的沸腾作用是矿质沉淀的主要机制.     

青海铜峪沟铜矿床成矿流体特征及矿床类型探讨

青海省铜峪沟铜矿床位于东昆仑东西向构造岩浆带与鄂拉山北西向构造岩浆带的复合部位。依据矿物共生组合、交代与穿插关系可将铜峪沟铜矿成矿过程分为3个阶段:矽卡岩阶段、石英—多金属硫化物阶段及石英—方解石阶段。对不同阶段包裹体进行了包裹体岩相学、显微测温学和包裹体成分分析。研究结果表明,流体包裹体主要为液相包裹体(L型)、气相包裹体(G型)及含子矿物包裹体(S型)。其中矽卡岩阶段以含子矿物包裹体(均一温度为322℃~600℃,盐度为32.92%~73.97%Na Cleqv)和液相包裹体(均一温度为231℃~600℃,盐度为10.74%~21.68%Na Cleqv)为主。石英—多金属硫化物阶段以液相包裹体(均一温度为176℃~381℃,盐度为2.74%~21.96%Na Cleqv)和气相包裹体(均一温度为127℃~419℃,盐度为4.49%~8.81%Na Cleqv)为主。石英—方解石阶段仅发育液相包裹体(均一温度为143℃~201℃,盐度为5.25%~9.21%Na Cleqv)。计算得到流体压力、密度变化范围分别为0.37~132.2 MPa、0.53~1.17 g/cm3。成矿流体具有从高温高盐度向低温低盐度的演化特征。矽卡岩阶段发生了流体的混合作用,石英—多金属硫化物阶段发生了流体的减压沸腾作用导致了大量金属硫化物沉淀,成矿晚阶段流体可能来源于大气降水。分析认为,铜峪沟铜矿为岩浆热液层矽卡岩矿床。     

甘肃小铁山铅锌多金属矿床流体包裹体特征

为探讨甘肃小铁山矿床的成矿流体来源、性质及其演化过程,对其含矿石英脉、重晶石样品开展了系统的流体包裹体研究。结果表明,包裹体类型主要为气液两相包裹体、纯气体包裹体、纯液体包裹体以及含CO_2的三相包裹体。显微测温结果表明,小铁山矿床下盘脉状矿体中石英的流体包裹体的均一温度为174~452℃,盐度为0.88%~9.86%NaCl_(eqv);重晶石中流体包裹体的均一温度为149~388℃,盐度为2.07%~12.16%;块状矿体中的流体包裹体均一温度为178~296℃,盐度为1.91%~14.46%NaCl_(eqv)。氢氧同位素研究显示,含矿石英脉状中δ~(18)O_(H_2O)为-1.14‰~4.68‰,δD_(V-SMOW)为-88.0‰~-153.2‰,结合包裹体的岩相学、流体性质等特征,推断成矿热液应为岩浆流体与加热海水的混合流体。     

内蒙古白乃庙石英脉群流体包裹体特征及其金的勘查意义

研究区位于内蒙古白乃庙—谷那乌素铜金成矿带,地质填图发现:白乃庙铜金矿床西侧徐尼乌苏组中发育一套石英脉群,产状与白乃庙矿区金矿化石英脉相似。其矿物组合可分为黄铁矿-石英早阶段(M1)和石英-方解石晚阶段(M2)。M1阶段捕获的流体包裹体中,含子晶三相包裹体均一温度为256~320℃,盐度为31.4%~39.8%NaCl eqv;两相水溶液包裹体的均一温度为210~260℃时,盐度为17.1%~22.8%NaCl eqv,气相富集CH4,CO2次之,含H2S、H2O及少量C6H6、N2,温度为170~210℃时,气相富集H2O或CO2,CH4次之,含N2,盐度与前者相似,但存在低盐度流体端员;纯气体包裹体成分为纯CH4或者CO2和CH4。M2阶段捕获两相水溶液包裹体,均一温度为90~160℃,盐度为15.82%~21.1%NaCl eqv,并与低盐度流体混合。石英脉群的流体可以看作中低温中低盐度含H2S、N2、C6H6的CH4-CO2-H2O-NaCl体系。对比金矿床成矿流体、白乃庙铜金矿床流体特征并结合化学分析,表明石英脉群具有金矿化的潜力。     

The terrestrial fauna of the Late Triassic Pant-y-ffynnon Quarry fissures,South Wales,UK and a new species of Clevosaurus (Lepidosauria: Rhynchocephalia)

Pant-y-ffynnon Quarry in South Wales yielded a rich cache of fossils in the early 1950s, including articulated specimens of new species (the small sauropodomorph dinosaur Pantydraco caducus and the crocodylomorph Terrestrisuchus gracilis), but no substantial study of the wider fauna of the Pant-y-ffynnon fissure systems has been published. Here, our overview of existing specimens, a few described but mostly undescribed, as well as freshly processed material, provides a comprehensive picture of the Pant-y-ffynnon palaeo-island of the Late Triassic. This was an island with a relatively impoverished fauna dominated by small clevosaurs (rhynchocephalians), including a new species, Clevosaurus cambrica, described here from a partially articulated specimen and isolated bones. The new species has a dental morphology that is intermediate between the Late Triassic Clevosaurus hudsoni, from Cromhall Quarry to the east, and the younger C. convallis from Pant Quarry to the west, suggesting adaptive radiation of clevosaurs in the palaeo-archipelago. The larger reptiles on the palaeo-island do not exceed 1.5?m in length, including a small carnivorous crocodylomorph, Terrestrisuchus, and a possible example of insular dwarfism in the basal dinosaur Pantydraco.     

Définition d'une limite multicritère ; stratigraphie du passage Campanien–Maastrichtien du site géologique de Tercis (Landes,SW France)Definition of a multi-criteria boundary; stratigraphy of the Campanian–Maastrichtian interval of the geological site at Tercis (Landes,SW France)

Lithostratigraphy, physicochemical stratigraphy, biostratigraphy, and geochronology of the 77–70 Ma old series bracketing the Campanian–Maastrichtian boundary have been investigated by 70 experts. For the first time, direct relationships between macro- and microfossils have been established, as well as direct and indirect relationships between chemo-physical and biostratigraphical tools. A combination of criteria for selecting the boundary level, duration estimates, uncertainties on durations and on the location of biohorizons have been considered; new chronostratigraphic units are proposed. The geological site at Tercis is accepted by the Commission on Stratigraphy as the international reference for the stratigraphy of the studied interval. To cite this article: G.S. Odin, C. R. Geoscience 334 (2002) 409–414.     

The effect of water on accessory phase solubility in subaluminous and peralkaline granitic melts

The solubilities of columbite, tantalite, wolframite, rutile, zircon and hafnon were determined as a function of the water contents in peralkaline and subaluminous granite melts. All experiments were conducted at 1035 °C and 2 kbar and the water contents of the melts ranged from nominally dry to approximately 6 wt.% H₂O. Accessory phase solubilities are not affected by the water content of the peralkaline melt. By contrast, solubilities are affected by the water content of the subaluminous melt, where the solubilities of all the accessory phases examined increase with the water content of the melt, up to 2 wt.% H₂O. At higher water contents, solubilities are nearly constant. It can be concluded that water is not an important control of accessory phase solubility, although the water content will affect diffusivities of components in the melt, thus whether or not accessory phases will be present as restite material. The solubility behaviour in the subaluminous and peralkaline melts supports previous spectroscopic studies, which have observed differences in the coordination of high field strength elements in dry vs. wet subaluminous granitic glasses, but not for peralkaline granitic glasses. Lastly, the fact that wolframite solubility increases with increasing water content in the subaluminous melt suggests that tungsten dissolved as a hexavalent species.     

Quaternary stresses revealed by calcite twinning inversion: insights from observations in the Savonnières underground quarry (eastern France)

Calcite samples were extracted both from the rock matrix and the superficial coating of a karstified fault plane of an underground quarry, located in the eastern border of the Paris basin. The karstification is dated as Quaternary. Analysis of mechanical calcite twinning reveals that only the calcite matrix has also undergone a compression trending WNW that can be attributed to the Mio-Pliocene alpine collision. Both coating and matrix have undergone a strike-slip regime with σ₁ roughly trending north–south, that could correspond to the regional present-day state of stress, a strike-slip compression rather trending NNW, modified by local phenomena. To cite this article: M. Rocher et al., C. R. Geoscience 335 (2003).     

NONMETALS DEPOSITS

正20141520 Bo Ying(Key Laboratory of Metallogeny and Mineral Assessment,MLR,Beijing 100037,China);Liu Chenglin Saline Spring Hydrochemical Characteristics and Indicators for Potassium Exploration in Southwestern and Northern Tarim Basin,Xinjiang(Acta Geoscientica Sinica,ISSN1006-3021,CN11-3474/P,34(5),2013,p.594-602,5 illus.,3 tables,28 refs.)     

MATHEMATICAL GEOLOGY

正20141243Chen Ge(Hangzhou Research Institute of Petroleum Geology,PetroChina,Hangzhou 310023,China);Si Chunsong Study on Sedimentary Numerical Simulation Method of Fan Delta Sand Body(Journal of Geology,     

PROSPECTING EXPLORATION

正20142599Chen Sanming(Guangxi Key Laboratory of Concealed Deposits Exploration,Guilin University of Technology,Guilin541004,China);He Yuzhou Block Model and Reserves Estimation of Panzhihua Iron Deposit Based on 3D Geological Modeling(Journal of Guilin University of Technology,ISSN1674-9057,CN45-1375/N,33(4),2013,p.610-615,9illus.,1table,15refs.)     

STRUCTURAL GEOLOGY

正20140594 Bai Daoyuan(Hunan Institute of Geology Survey,Changsha 410016,China);Zhong Xiang Faults in the Jingzhou Basin and Their Tectonic Settings(Geotectonica et Metallogenia,ISSN1001-1552,CN44-1595/P,37(2),2013,p.173-183,6illus.,59refs.)Key words:basin evolution,tectonic setting,South China In the Upper Paleozoic and Jurassic se-     

STRUCTURAL GEOLOGY

正20141912Cao Hui(State Key Laboratory for Continental Tectonics and Dynamics,Institute of Geology,Chinese Academy of Geological Sciences,Beijing 100037,China)Gravitational Collapse and Folding during Orogenesis:A Comparative Study of FIA Trends and Fold Axial Plane Traces(Geology in China,ISSN1000-3657,CN11-1167/P,40(6),2013,p.1818-1828,9illus.,35refs.,with