Stellar science from a blue wavelength range

From stellar spectra, a variety of physical properties of stars can be derived. In particular, the chemical composition of stellar atmospheres can be inferred from absorption line analyses. These provide key information on large scales, such as the formation of our Galaxy, down to the small‐scale nucleosynthesis processes that take place in stars and supernovae. By extending the observed wavelength range toward bluer wavelengths, we optimize such studies to also include critical absorption lines in metal‐poor stars, and allow for studies of heavy elements (Z ≥ 38) whose formation processes remain poorly constrained. In this context, spectrographs optimized for observing blue wavelength ranges are essential, since many absorption lines at redder wavelengths are too weak to be detected in metal‐poor stars. This means that some elements cannot be studied in the visual‐redder regions, and important scientific tracers and science cases are lost. The present era of large public surveys will target millions of stars. It is therefore important that the next generation of spectrographs are designed such that they cover a wide wavelength range and can observe a large number of stars simultaneously. Only then, we can gain the full information from stellar spectra, from both metal‐poor to metal‐rich ones, that will allow us to understand the aforementioned formation scenarios in greater detail. Here we describe the requirements driving the design of the forthcoming survey instrument 4MOST, a multi‐object spectrograph commissioned for the ESO VISTA 4 m‐telescope. While 4MOST is also intended for studies of active galactic nuclei, baryonic acoustic oscillations, weak lensing, cosmological constants, supernovae and other transients, we focus here on high‐density, wide‐area survey of stars and the science that can be achieved with high‐resolution stellar spectroscopy. Scientific and technical requirements that governed the design are described along with a thorough line blending analysis. For the high‐resolution spectrograph, we find that a sampling of ≥2.5 (pixels per resolving element), spectral resolution of 18000 or higher, and a wavelength range covering 393–436 nm, is the most well‐balanced solution for the instrument. A spectrograph with these characteristics will enable accurate abundance analysis (±0.1 dex) in the blue and allow us to confront the outlined scientific questions. (© 2015 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

Sulphur abundances in halo stars from multiplet 3 at 1045 nm

Sulphur is a volatile α ‐element which is not locked into dust grains in the interstellar medium (ISM). Hence, its abundance does not need to be corrected for dust depletion when comparing the ISM to the stellar atmospheres. The abundance of sulphur in the photosphere of metal‐poor stars is a matter of debate: according to some authors, [S/Fe] versus [Fe/H] forms a plateau at low metallicity, while, according to other studies, there is a large scatter or perhaps a bimodal distribution. In metal‐poor stars sulphur is detectable by its lines of multiplet 1 at 920 nm, but this range is heavily contaminated by telluric absorptions, and one line of the multiplet is blended by the hydrogen Paschen ζ line. We study the possibility of using multiplet 3 (at 1045 nm) for deriving the sulphur abundance because this range, now observable at the VLT with the infra‐red spectrograph CRIRES, is little contaminated by telluric absorption and not affected by blends at least in metal‐poor stars. We compare the abundances derived from multiplets 1 and 3, taking into account NLTE corrections and 3D effects. Here we present the results for a sample of four stars, although the scatter is less pronounced than in previous analysis, we cannot find a plateau in [S/Fe], and confirm the scatter of the sulphur abundance at low metallicity (© 2010 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

Empirical calibration of the near-infrared Ca ii triplet – II. The stellar atmospheric parameters

We present a homogeneous set of stellar atmospheric parameters ( T _eff, log  g , [Fe/H]) for a sample of about 700 field and cluster stars which constitute a new stellar library in the near-IR developed for stellar population synthesis in this spectral region ( λ 8350–9020) . Having compiled the available atmospheric data in the literature for field stars, we have found systematic deviations between the atmospheric parameters from different bibliographic references. The Soubiran, Katz & Cayrel sample of stars with very well determined fundamental parameters has been taken as our standard reference system, and other papers have been calibrated and bootstrapped against it. The obtained transformations are provided in this paper. Once most of the data sets were on the same system, final parameters were derived by performing error weighted means. Atmospheric parameters for cluster stars have also been revised and updated according to recent metallicity scales and colour–temperature relations.     

A semi-automatic procedure for abundance determination of A- and F-type stars

A variety of physical processes leading to different types of pulsations and chemical compositions are observed between A- and F-type stars. To investigate the underlying mechanisms responsible for these processes in stars with similar locations in the Hertzsprung–Russell diagram, an accurate abundance determination is needed, among others. Here, we describe a semi-automatic procedure developed to determine chemical abundances of various elements ranging from helium to mercury for this type of stars. We test our procedure on synthetic spectra, demonstrating that our procedure provides abundances consistent with the input values, even when the stellar parameters are offset by reasonable observational errors. For a fast-rotating star such as Vega, our analysis is consistent with those carried out with other plane-parallel model atmospheres. Simulations show that the offsets from the input abundances increase for stars with low inclination angle of about  4°  . For this inclination angle, we also show that the distribution of the iron abundance found in different regions is bimodal. Furthermore, the effect of rapid rotation can be seen in the peculiar behaviour of the Hβ line.     

Abundance analysis of the γ Doradus–δ Scuti hybrid metallic line (Am) star HD 8801

Low frequency oscillation, typical for γ Doradus g‐mode type stellar core sensitive pulsation, as well as higher frequency δ Scuti type pulsation typical for p ‐modes, sensitive to the envelope, make HD 8801 a remarkable hybrid pulsator with the potential to probe a stellar structure over a wide range of radius. In addition HD 8801 is a rare pulsating metallic line (Am) star. We determined the astro‐physical fundamental parameters to locate HD 8801 in the H‐R diagram. We analyzed the element abundances, paying close attention to the errors involved, and confirm the nature of HD 8801 as a metallic line (Am) star. We also determined an upper limit on the magnetic field strength. Our abundance analysis is based on classical techniques, but uses for the final step a model atmosphere calculated with the abundances determined by us. We also discuss spectropolarimetric observations obtained for HD 8801. This object is remarkable in several respects. It is a nonmagnetic metallic line (Am) star, pulsating simultaneously in p‐ and g‐modes, but also shows oscillations with periods in between these two domains, whose excitation requires explanation. Overall, the pulsational incidence in unevolved classical Am stars is believed to be quite low; HD 8801 does not conform to this picture. Finally, about 75 % of Am stars are located in short‐period binaries, but there is no evidence that HD 8801 has a companion. (© 2013 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

Variability of the HeIλ5876 Å line in early type chemically peculiar stars. II

To try to understand the behavior of helium variability in Chemically Peculiar stars, we continued our on‐going observational campaign started by Catanzaro, Leone & Catalano (1999). In this paper we present a new set of time resolved spectroscopic observations of the HeI5876 Å line for a sample of 10 stars in the spectral range B3 ‐ A2 and characterized by different overabundances. This line does not show variability in two stars: HD77350 and HD175156. It shows instead an equivalent width variation in phase with the Hipparcos light curve for two stars: HD79158 and HD196502. Antiphase variations have been found in 4 stars of our sample, namely: HD35502, HD124224, HD129174 and HD142990. Nothing we can say about HD115735 because of the constancy of Hipparcos photometric data, while no phase relation has been observed for HD90044. In the text we discuss the case of HD175156, according to photometric calibration and our spectroscopic observations we rule out the membership of this star to the main sequence chemically peculiar stars. We confirm the results obtained in the previous paper for which phase relations between light, spectral and magnetic variations are not dependent on stellar spectral type or peculiarity subclass.     

Stellar archaeology: Exploring the Universe with metal‐poor stars

The abundance patterns of the most metal‐poor stars in the Galactic halo and small dwarf galaxies provide us with a wealth of information about the early Universe. In particular, these old survivors allow us to study the nature of the first stars and supernovae, the relevant nucleosynthesis processes responsible for the formation and evolution of the elements, early star‐ and galaxy formation processes, as well as the assembly process of the stellar halo from dwarf galaxies a long time ago. This review presents the current state of the field of “stellar archaeology” – the diverse use of metal‐poor stars to explore the high‐redshift Universe and its constituents. In particular, the conditions for early star formation are discussed, how these ultimately led to a chemical evolution, and what the role of the most iron‐poor stars is for learning about Population III supernovae yields. Rapid neutron‐capture signatures found in metal‐poor stars can be used to obtain stellar ages, but also to constrain this complex nucleosynthesis process with observational measurements. Moreover, chemical abundances of extremely metal‐poor stars in different types of dwarf galaxies can be used to infer details on the formation scenario of the halo and the role of dwarf galaxies as Galactic building blocks. I conclude with an outlook as to where this field may be heading within the next decade. A table of ~ 1000 metal‐poor stars and their abundances as collected from the literature is provided in electronic format (© 2010 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

Dissecting galaxies with quantitative spectroscopy of the brightest stars in the Universe

Measuring distances to galaxies, determining their chemical composition, investigating the nature of their stellar populations and the absorbing properties of their interstellar medium are fundamental activities in modern extragalactic astronomy helping to understand the evolution of galaxies and the expanding universe. The optically brightest stars in the universe, blue supergiants of spectral A and B, are unique tools for these purposes. With absolute visual magnitudes up to M_V ≃ ‐9.5 they are ideal to obtain accurate quantitative information about galaxies through the powerful modern methods of quantitative stellar spectroscopy. The spectral analysis of individual blue supergiant targets provides invaluable information about chemical abundances and abundance gradients, which is more comprehensive than the one obtained from H_II regions, as it includes additional atomic species, and which is also more accurate, since it avoids the systematic uncertainties inherent in the strong line studies usually applied to the H_II regions of spiral galaxies beyond the Local Group. Simultaneously, the spectral analysis yields stellar parameters and interstellar extinction for each individual supergiant target, which provides an alternative very accurate way to determine extragalactic distances through a newly developed method, called the Flux‐weighted Gravity–Luminosity Relationship (FGLR). With the present generation of 10 m‐class telescopes these spectroscopic studies can reach out to distances of 10 Mpc. The new generation of 30 m‐class telescopes will allow to extend this work out to 30 Mpc, a substantial volume of the local universe (© 2010 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

Spectral disentangling of the triple system DG Leo: orbits and chemical composition

DG Leo is a spectroscopic triple system composed of three stars of late-A spectral type, one of which was suggested to be a δ Scuti star. Seven nights of observations at high spectral and high time-resolution at the Observatoire de Haute-Provence with the ELODIE spectrograph were used to obtain the component spectra by applying a Fourier transform spectral disentangling technique. Comparing these with synthetic spectra, the stellar fundamental parameters (effective temperature, surface gravity, projected rotation velocity and chemical composition) are derived. The inner binary consists of two Am components, at least one of which is not yet rotating synchronously at the orbital period though the orbit is a circular one. The distant third component is confirmed to be a δ Scuti star with normal chemical composition.     

Element spots in Ap and Hg‐Mn stars from current‐driven diffusion

The stars of the middle main sequence often have spot‐like chemical structures at their surfaces. We consider the diffusion process caused by electric currents that can lead to the formation of such chemical spots. Diffusion is considered using the partial momentum equations derived by the Chapman‐Enskog method. We argue that diffusion caused by electric currents can substantially change the surface chemistry of stars and form spotted chemical structures even in a relatively weak magnetic field. The considered mechanism can be responsible for a formation of element spots in Hg‐Mn and Ap‐stars. (© 2015 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

Models of α Centauri A and B with and without seismic constraints: time dependence of the mixing-length parameter

The α Centauri (α Cen) binary system is a well-known stellar system with very accurate observational constraints on the structure of its component stars. In addition to the classical non-seismic constraints, there are also seismic constraints for the interior models of α Cen A and B. These two types of constraint give very different values for the age of the system. While we obtain 8.9 Gyr for the age of the system from the non-seismic constraints, the seismic constraints imply that the age is about 5.6–5.9 Gyr. There may be observational or theoretical reasons for this discrepancy, which can be found by careful consideration of similar stars. The α Cen binary system, with its solar-type components, is also suitable for testing the stellar mass dependence of the mixing-length parameter for convection derived from the binaries of Hyades. The values of the mixing-length parameter for α Cen A and B are 2.10 and 1.90 for the non-seismic constraints. If we prioritize the seismic constraints, we obtain 1.64 and 1.91 for α Cen A and B, respectively. By taking into account these two contrasting cases for stellar mass dependence of the mixing-length parameter, we derive two expressions for its time dependence, which are also compatible with the mass dependence of the mixing-length parameter derived from the Hyades stars. For assessment, these expressions should be tested in other stellar systems and clusters.     

Isotope spectroscopy

The measurement of isotopic ratios provides a privileged insight both into nucleosynthesis and into the mechanisms operating in stellar envelopes, such as gravitational settling. In this article, we give a few examples of how isotopic ratios can be determined from high‐resolution, high‐quality stellar spectra. We consider examples of the lightest elements, H and He, for which the isotopic shifts are very large and easily measurable, and examples of heavier elements for which the determination of isotopic ratios is more difficult. The presence of ⁶Li in the stellar atmospheres causes a subtle extra depression in the red wing of the ⁷Li 670.7 nm doublet which can only be detected in spectra of the highest quality. But even with the best spectra, the derived ⁶Li abundance can only be as good as the synthetic spectra used for their interpretation. It is now known that 3D non‐LTE modelling of the lithium spectral line profiles is necessary to account properly for the intrinsic line asymmetry, which is produced by convective flows in the atmospheres of cool stars, and can mimic the presence of ⁶Li. We also discuss briefly the case of the carbon isotopic ratio in metal‐poor stars, and provide a new determination of the nickel isotopic ratios in the solar atmosphere. (© 2014 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

Analyses of Wolf-Rayet ultraviolet spectra

Ultraviolet spectra of population I WR stars obtained from IUE archive are used to determine fundamental stellar parameters. Terminal velocities for 85 galactic and LMC Wolf-Rayet stars were obtained by means of the empirical relation between spectral quantities easily measured in low resolution and high-resolution terminal velocity measurements. Temperatures and so-called transformed radii were derived based on available contour plots of spectral characteristics for a grid of NLTE models. The effect of the reddening law on stellar far ultraviolet continua is emphasized and the revised extinction curve towards WR stars is used for dereddening. For the sample of stars attributed to open clusters or associations we construct the stellar distance scale and adopt it for the other WR stars. The remaining fundamental parameters are derived and HR diagram for population I WR stars is presented.     

Δ Y/Δ Z from fine structure in the main sequence based on Hipparcos parallaxes

The slope Δ Y /Δ Z is a quantity of interest in relation to stellar evolution, the initial mass function and the determination of the primordial helium abundance. In this paper we estimate Δ Y /Δ Z from fine structure in the main sequence of nearby stars from Hipparcos data for stars with Z  ≤ Z⊙. We find a value of about 3, which is consistent with what has been found in extragalactic H  II regions and with stellar models for suitable upper limits to the initial masses of supernovae according to the initial mass function slope adopted.     

Empirical calibration of the near-infrared Ca ii triplet – III. Fitting functions

Using a near-infrared stellar library of 706 stars with a wide coverage of atmospheric parameters, we study the behaviour of the Ca  ii triplet strength in terms of effective temperature, surface gravity and metallicity. Empirical fitting functions for recently defined line-strength indices, namely CaT*, CaT and PaT, are provided. These functions can be easily implemented into stellar population models to provide accurate predictions for integrated Ca  ii strengths. We also present a thorough study of the various error sources and their relation to the residuals of the derived fitting functions. Finally, the derived functional forms and the behaviour of the predicted Ca  ii are compared with those of previous works in the field.     

The exceptional Herbig Ae star HD 101412: The first detection of resolved magnetically split lines and the presence of chemical spots in a Herbig star

In our previous search for magnetic fields in Herbig Ae stars, we pointed out that HD 101412 possesses the strongest magnetic field among the Herbig Ae stars and hence is of special interest for follow‐up studies of magnetism among young pre‐main‐sequence stars. We obtained high‐resolution, high signal‐to‐noise UVES and a few lower quality HARPS spectra revealing the presence of resolved magnetically split lines. HD 101412 is the first Herbig Ae star for which the rotational Doppler effect was found to be small in comparison to the magnetic splitting and several spectral lines observed in unpolarized light at high dispersion are resolved into magnetically split components. The measured mean magnetic field modulus varies from 2.5 to 3.5kG, while the mean quadratic field was found to vary in the range of 3.5 to 4.8 kG. To determine the period of variations, we used radial velocity, equivalent width, line width, and line asymmetry measurements of variable spectral lines of several elements, as well as magnetic field measurements. The period determination was done using the Lomb‐Scargle method. The most pronounced variability was detected for spectral lines of He I and the iron peak elements, whereas the spectral lines of CNO elements are only slightly variable. From spectral variations and magnetic field measurements we derived a potential rotation period P_rot = 13.86 d, which has to be proven in future studies with a larger number of observations. It is the first time that the presence of element spots is detected on the surface of a Herbig Ae/Be star. Our previous study of Herbig Ae stars revealed a trend towards stronger magnetic fields for younger Herbig Ae stars, confirmed by statistical tests. This is in contrast to a few other (non‐statistical) studies claiming that magnetic Herbig Ae stars are progenitors of the magnetic Ap stars. New developments in MHD theory show that the measured magnetic field strengths are compatible with a current‐driven instability of toroidal fields generated by differential rotation in the stellar interior. This explanation for magnetic intermediate‐mass stars could be an alternative to a frozen‐in fossil field (© 2010 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

Light‐element abundance variations in globular clusters

Star‐to‐star variations in abundances of the light elements carbon, nitrogen, oxygen, and sodium have been observed in stars of all evolutionary phases in all Galactic globular clusters that have been thoroughly studied. The data available for studying this phenomenon, and the hypotheses as to its origin, have both co‐evolved with observing technology; once high‐resolution spectra were available even for main‐sequence stars in globular clusters, scenarios involving multiple closely spaced stellar generations enriched by feedback from moderate‐ and high‐mass stars began to gain traction in the literature. This paper briefly reviews the observational history of globular cluster abundance inhomogeneities, discusses the presently favored models of their origin, and considers several aspects of this problem that require further study (© 2011 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

Abundance analysis of the cool extreme helium star LSS 3378

Abundance analysis of the cool extreme helium (EHe) star LSS 3378 is presented. The abundance analysis is done using local thermodynamic equilibrium (LTE) line formation and LTE model atmospheres constructed for EHe stars.
The atmosphere of LSS 3378 shows evidence of H-burning, He-burning, and s -process nucleosynthesis. The derived abundances of iron peak and α-elements indicate the absence of selective fractionation or any other processes that can distort chemical composition of these elements. Hence, the Fe abundance [log ε(Fe) = 6.1] is adopted as an initial metallicity indicator. The measured abundances of LSS 3378 are compared with those of R Coronae Borealis (RCB) stars and with rest of the EHe stars as a group.     

On rejuvenation in massive binary systems

We introduce a set of stellar models for massive stars whose evolution has been affected by mass transfer in a binary system, at a range of metallicities. As noted by other authors, the effect of such mass transfer is frequently more than just rejuvenation. We find that, whilst stars with convective cores which have accreted only H-rich matter rejuvenate as expected, those stars which have accreted He-rich matter (e.g. at the end stages of conservative mass transfer) evolve in a way that is qualitatively similar to rejuvenated stars of much higher metallicity. Thus, the effects of non-conservative evolution depend strongly on whether He-rich matter is amongst the portion accreted or ejected. This may lead to a significant divergence in binary evolution paths with only a small difference in initial assumptions. We compare our models to observed systems and find approximate formulae for the effect of mass accretion on the effective age and metallicity of the resulting star.     

The chemical composition of the Small Magellanic Cloud

The Small Magellanic Cloud is a close, irregular galaxy that has experienced a complex star formation history due to the strong interactions occurred both with the Large Magellanic Cloud and the Galaxy. Despite its importance, the chemical composition of its stellar populations older than ∼ 1–2 Gyr is still poorly investigated. I present the first results of a spectroscopic survey of ∼ 200 Small Magellanic Cloud giant stars performed with FLAMES@VLT. The derived metallicity distribution peaks at [Fe/H] ∼ –0.9/–1.0 dex, with a secondary peak at [Fe/H] ∼ –0.6 dex. All these stars show [α /Fe] abundance ratios that are solar or mildly enhanced (∼+0.1 dex). Also, three metal‐poor stars (with [Fe/H] ∼ –2.5 dex and enhanced [α /Fe] ratios compatible with those of the Galactic Halo) have been detected in the outskirts of the SMC: These giants are the most metal‐poor stars discovered so far in the Magellanic Clouds. (© 2014 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)