Correlation‐based reflection waveform inversion by one‐way wave equations

Reflection full waveform inversion can update subsurface velocity structure of the deeper part, but tends to get stuck in the local minima associated with the waveform misfit function. These local minima cause cycle skipping if the initial background velocity model is far from the true model. Since conventional reflection full waveform inversion using two‐way wave equation in time domain is computationally expensive and consumes a large amount of memory, we implement a correlation‐based reflection waveform inversion using one‐way wave equations to retrieve the background velocity. In this method, one‐way wave equations are used for the seismic wave forward modelling, migration/de‐migration and the gradient computation of objective function in frequency domain. Compared with the method using two‐way wave equation, the proposed method benefits from the lower computational cost of one‐way wave equations without significant accuracy reduction in the cases without steep dips. It also largely reduces the memory requirement by an order of magnitude than implementation using two‐way wave equation both for two‐ and three‐dimensional situations. Through numerical analysis, we also find that one‐way wave equations can better construct the low wavenumber reflection wavepath without producing high‐amplitude short‐wavelength components near the image points in the reflection full waveform inversion gradient. Synthetic test and real data application show that the proposed method efficiently updates the background velocity model.     

Anisotropic elastic full‐waveform inversion of walkaway vertical seismic profiling data from the Arabian Gulf

Borehole seismic addresses the need for high‐resolution images and elastic parameters of the subsurface. Full‐waveform inversion of vertical seismic profile data is a promising technology with the potential to recover quantitative information about elastic properties of the medium. Full‐waveform inversion has the capability to process the entire wavefield and to address the wave propagation effects contained in the borehole data—multi‐component measurements; anisotropic effects; compressional and shear waves; and transmitted, converted, and reflected waves and multiples. Full‐waveform inversion, therefore, has the potential to provide a more accurate result compared with conventional processing methods. We present a feasibility study with results of the application of high‐frequency (up to 60 Hz) anisotropic elastic full‐waveform inversion to a walkaway vertical seismic profile data from the Arabian Gulf. Full‐waveform inversion has reproduced the majority of the wave events and recovered a geologically plausible layered model with physically meaningful values of the medium.     

Elastic full waveform inversion of multi‐component OBC seismic data

Elastic full waveform inversion of seismic reflection data represents a data‐driven form of analysis leading to quantification of sub‐surface parameters in depth. In previous studies attention has been given to P‐wave data recorded in the marine environment, using either acoustic or elastic inversion schemes. In this paper we exploit both P‐waves and mode‐converted S‐waves in the marine environment in the inversion for both P‐ and S‐wave velocities by using wide‐angle, multi‐component, ocean‐bottom cable seismic data. An elastic waveform inversion scheme operating in the time domain was used, allowing accurate modelling of the full wavefield, including the elastic amplitude variation with offset response of reflected arrivals and mode‐converted events. A series of one‐ and two‐dimensional synthetic examples are presented, demonstrating the ability to invert for and thereby to quantify both P‐ and S‐wave velocities for different velocity models. In particular, for more realistic low velocity models, including a typically soft seabed, an effective strategy for inversion is proposed to exploit both P‐ and mode‐converted PS‐waves. Whilst P‐wave events are exploited for inversion for P‐wave velocity, examples show the contribution of both P‐ and PS‐waves to the successful recovery of S‐wave velocity.     

Velocity model building from seismic reflection data by full‐waveform inversion

Full‐waveform inversion is re‐emerging as a powerful data‐fitting procedure for quantitative seismic imaging of the subsurface from wide‐azimuth seismic data. This method is suitable to build high‐resolution velocity models provided that the targeted area is sampled by both diving waves and reflected waves. However, the conventional formulation of full‐waveform inversion prevents the reconstruction of the small wavenumber components of the velocity model when the subsurface is sampled by reflected waves only. This typically occurs as the depth becomes significant with respect to the length of the receiver array. This study first aims to highlight the limits of the conventional form of full‐waveform inversion when applied to seismic reflection data, through a simple canonical example of seismic imaging and to propose a new inversion workflow that overcomes these limitations. The governing idea is to decompose the subsurface model as a background part, which we seek to update and a singular part that corresponds to some prior knowledge of the reflectivity. Forcing this scale uncoupling in the full‐waveform inversion formalism brings out the transmitted wavepaths that connect the sources and receivers to the reflectors in the sensitivity kernel of the full‐waveform inversion, which is otherwise dominated by the migration impulse responses formed by the correlation of the downgoing direct wavefields coming from the shot and receiver positions. This transmission regime makes full‐waveform inversion amenable to the update of the long‐to‐intermediate wavelengths of the background model from the wide scattering‐angle information. However, we show that this prior knowledge of the reflectivity does not prevent the use of a suitable misfit measurement based on cross‐correlation, to avoid cycle‐skipping issues as well as a suitable inversion domain as the pseudo‐depth domain that allows us to preserve the invariant property of the zero‐offset time. This latter feature is useful to avoid updating the reflectivity information at each non‐linear iteration of the full‐waveform inversion, hence considerably reducing the computational cost of the entire workflow. Prior information of the reflectivity in the full‐waveform inversion formalism, a robust misfit function that prevents cycle‐skipping issues and a suitable inversion domain that preserves the seismic invariant are the three key ingredients that should ensure well‐posedness and computational efficiency of full‐waveform inversion algorithms for seismic reflection data.     

Offset‐variable density improves acoustic full‐waveform inversion: a shallow marine case study

We have previously applied three‐dimensional acoustic, anisotropic, full‐waveform inversion to a shallow‐water, wide‐angle, ocean‐bottom‐cable dataset to obtain a high‐resolution velocity model. This velocity model produced an improved match between synthetic and field data, better flattening of common‐image gathers, a closer fit to well logs, and an improvement in the pre‐stack depth‐migrated image. Nevertheless, close examination reveals that there is a systematic mismatch between the observed and predicted data from this full‐waveform inversion model, with the predicted data being consistently delayed in time. We demonstrate that this mismatch cannot be produced by systematic errors in the starting model, by errors in the assumed source wavelet, by incomplete convergence, or by the use of an insufficiently fine finite‐difference mesh. Throughout these tests, the mismatch is remarkably robust with the significant exception that we do not see an analogous mismatch when inverting synthetic acoustic data. We suspect therefore that the mismatch arises because of inadequacies in the physics that are used during inversion. For ocean‐bottom‐cable data in shallow water at low frequency, apparent observed arrival times, in wide‐angle turning‐ray data, result from the characteristics of the detailed interference pattern between primary refractions, surface ghosts, and a large suite of wide‐angle multiple reflected and/or multiple refracted arrivals. In these circumstances, the dynamics of individual arrivals can strongly influence the apparent arrival times of the resultant compound waveforms. In acoustic full‐waveform inversion, we do not normally know the density of the seabed, and we do not properly account for finite shear velocity, finite attenuation, and fine‐scale anisotropy variation, all of which can influence the relative amplitudes of different interfering arrivals, which in their turn influence the apparent kinematics. Here, we demonstrate that the introduction of a non‐physical offset‐variable water density during acoustic full‐waveform inversion of this ocean‐bottom‐cable field dataset can compensate efficiently and heuristically for these inaccuracies. This approach improves the travel‐time match and consequently increases both the accuracy and resolution of the final velocity model that is obtained using purely acoustic full‐waveform inversion at minimal additional cost.     

多主频波场的时间阻尼全波形反演

低频成分缺失和地下速度强烈变化会导致严重的周期跳现象,是地震数据全波形反演的难题.通过对地震数据加时间阻尼和时间积分降主频处理,提出了一种可有效去除周期跳现象的多主频波场时间阻尼全波形反演方法.由浅到深的速度不准确会造成波形走时失配和走时失配的累积.浅部速度的准确反演可有效地减小深部波形走时失配与周期跳现象.对地震数据施加时间阻尼得到时间阻尼数据,利用不同阻尼值的时间阻尼地震数据实现由浅到深的全波形反演.低主频波场的周期跳现象相对高主频波场的要弱.对地震波场进行不同阶的时间积分以得到不同主频的波场,把低主频波场的全波形反演结果作为高主频波场全波形反演的初始模型.应用缺失4 Hz以下频谱成分的二维盐丘模型合成数据验证所提出的全波形反演方法的正确性和有效性,数值试验结果显示多主频波场的时间阻尼全波形反演方法对缺失低频成分地震数据和地下速度强烈变化具有很好的适应性.     

The use of low frequencies in a full‐waveform inversion and impedance inversion land seismic case study

Velocity model building and impedance inversion generally suffer from a lack of intermediate wavenumber content in seismic data. Intermediate wavenumbers may be retrieved directly from seismic data sets if enough low frequencies are recorded. Over the past years, improvements in acquisition have allowed us to obtain seismic data with a broader frequency spectrum. To illustrate the benefits of broadband acquisition, notably the recording of low frequencies, we discuss the inversion of land seismic data acquired in Inner Mongolia, China. This data set contains frequencies from 1.5–80 Hz. We show that the velocity estimate based on an acoustic full‐waveform inversion approach is superior to one obtained from reflection traveltime inversion because after full‐waveform inversion the background velocity conforms to geology. We also illustrate the added value of low frequencies in an impedance estimate.     

Full waveform inversion using oriented time‐domain imaging method for vertical transverse isotropic media

Full waveform inversion for reflection events is limited by its linearised update requirements given by a process equivalent to migration. Unless the background velocity model is reasonably accurate, the resulting gradient can have an inaccurate update direction leading the inversion to converge what we refer to as local minima of the objective function. In our approach, we consider mild lateral variation in the model and, thus, use a gradient given by the oriented time‐domain imaging method. Specifically, we apply the oriented time‐domain imaging on the data residual to obtain the geometrical features of the velocity perturbation. After updating the model in the time domain, we convert the perturbation from the time domain to depth using the average velocity. Considering density is constant, we can expand the conventional 1D impedance inversion method to two‐dimensional or three‐dimensional velocity inversion within the process of full waveform inversion. This method is not only capable of inverting for velocity, but it is also capable of retrieving anisotropic parameters relying on linearised representations of the reflection response. To eliminate the crosstalk artifacts between different parameters, we utilise what we consider being an optimal parametrisation for this step. To do so, we extend the prestack time‐domain migration image in incident angle dimension to incorporate angular dependence needed by the multiparameter inversion. For simple models, this approach provides an efficient and stable way to do full waveform inversion or modified seismic inversion and makes the anisotropic inversion more practicable. The proposed method still needs kinematically accurate initial models since it only recovers the high‐wavenumber part as conventional full waveform inversion method does. Results on synthetic data of isotropic and anisotropic cases illustrate the benefits and limitations of this method.     

青藏高原东缘及东北缘S波速度结构和径向各向异性

青藏东缘和东北缘是高原生长和扩张的前缘,研究其地下物质及变形特征有助于理解青藏高原生长机制.本文收集187个固定地震台站记录的长达7年的三分量连续波形数据,辅以189个流动台站3年的数据,开展噪声瑞利波和勒夫波群速度层析成像工作.基于8～40 s周期瑞利波和勒夫波群速度,通过线性反演方法得到地下50 km深度范围的三维SH和SV速度结构.我们定义径向各向异性ψ=2(v_(SH)-v_(SV))/(v_(SH)+v_(SV)),以此来展示地下物质变形以水平方向(v_(SH)v_(SV))还是垂直方向(v_(SH)v_(SV))为主.径向各向异性显示青藏高原东缘和东北缘具有完全不同的变形机制.青藏东北缘以垂向变形为主,地壳流模型不太可能是该区域主要的变形机制.青藏东缘以水平变形为主,支持中下地壳流变模型.柴达木盆地和四川盆地下方径向各向异性差异显著,说明高原边缘稳定的地块在高原扩展中起到不同的作用.     

Out‐of‐plane effects in 2D borehole‐to‐surface resistivity tomography and applications in mineral exploration

In this paper, we discuss the effects of anomalous out‐of‐plane bodies in two‐dimensional (2D) borehole‐to‐surface electrical resistivity tomography with numerical resistivity modelling and synthetic inversion tests. The results of the two groups of synthetic resistivity model tests illustrate that anomalous bodies out of the plane of interest have an effect on two‐dimensional inversion and that the degree of influence of out‐of‐plane body on inverted images varies. The different influences are derived from two cases. One case is different resistivity models with the same electrode array, and the other case is the same resistivity model with different electrode arrays. Qualitative interpretation based on the inversion tests shows that we cannot find a reasonable electrode array to determine the best inverse solution and reveal the subsurface resistivity distribution for all types of geoelectrical models. Because of the three‐dimensional effect arising from neighbouring anomalous bodies, the qualitative interpretation of inverted images from the two‐dimensional inversion of electrical resistivity tomography data without prior information can be misleading. Two‐dimensional inversion with drilling data can decrease the three‐dimensional effect. We employed two‐ and three‐dimensional borehole‐to‐surface electrical resistivity tomography methods with a pole–pole array and a bipole–bipole array for mineral exploration at Abag Banner and Hexigten Banner in Inner Mongolia, China. Different inverse schemes were carried out for different cases. The subsurface resistivity distribution obtained from the two‐dimensional inversion of the field electrical resistivity tomography data with sufficient prior information, such as drilling data and other non‐electrical data, can better describe the actual geological situation. When there is not enough prior information to carry out constrained two‐dimensional inversion, the three‐dimensional electrical resistivity tomography survey is the better choice.     

Sensitivity analysis and application of time‐lapse full‐waveform inversion: synthetic testing and field data example from the North Sea,Norway

Time‐lapse refraction can provide complementary seismic solutions for monitoring subtle subsurface changes that are challenging for conventional P‐wave reflection methods. The utilization of refraction time lapse has lagged behind in the past partly due to the lack of robust techniques that allow extracting easy‐to‐interpret reservoir information. However, with the recent emergence of the full‐waveform inversion technique as a more standard tool, we find it to be a promising platform for incorporating head waves and diving waves into the time‐lapse framework. Here we investigate the sensitivity of 2D acoustic, time‐domain, full‐waveform inversion for monitoring a shallow, weak velocity change (?30 m/s, or ?1.6%). The sensitivity tests are designed to address questions related to the feasibility and accuracy of full‐waveform inversion results for monitoring the field case of an underground gas blowout that occurred in the North Sea. The blowout caused the gas to migrate both vertically and horizontally into several shallow sand layers. Some of the shallow gas anomalies were not clearly detected by conventional 4D reflection methods (i.e., time shifts and amplitude difference) due to low 4D signal‐to‐noise ratio and weak velocity change. On the other hand, full‐waveform inversion sensitivity analysis showed that it is possible to detect the weak velocity change with the non‐optimal seismic input. Detectability was qualitative with variable degrees of accuracy depending on different inversion parameters. We inverted, the real 2D seismic data from the North Sea with a greater emphasis on refracted and diving waves’ energy (i.e., most of the reflected energy was removed for the shallow zone of interest after removing traces with offset less than 300 m). The full‐waveform inversion results provided more superior detectability compared with the conventional 4D stacked reflection difference method for a weak shallow gas anomaly (320 m deep).     

时间二阶积分波场的全波形反演

通过对波场的时间二阶积分运算以增强地震数据中的低频成分,提出了一种可有效减小对初始速度模型依赖性的地震数据全波形反演方法—时间二阶积分波场的全波形反演方法.根据散射理论中的散射波场传播方程,推导出时间二阶积分散射波场的传播方程,再利用一阶Born近似对时间二阶积分散射波场传播方程进行线性化.在时间二阶积分散射波场传播方程的基础上,利用散射波场反演地下散射源分布,再利用波场模拟的方法构建地下入射波场,然后根据时间二阶积分散射波场线性传播方程中散射波场与入射波场、速度扰动间的线性关系,应用类似偏移成像的公式得到速度扰动的估计,以此建立时间二阶积分波场的全波形迭代反演方法.最后把时间二阶积分波场的全波形反演结果作为常规全波形反演的初始模型可有效地减小地震波场全波形反演对初始模型的依赖性.应用于Marmousi模型的全频带合成数据和缺失4Hz以下频谱成分的缺低频合成数据验证所提出的全波形反演方法的正确性和有效性,数值试验显示缺失4Hz以下频谱成分数据的反演结果与全频带数据的反演结果没有明显差异.     

Frequency‐domain acoustic‐elastic coupled waveform inversion using the Gauss‐Newton conjugate gradient method

We developed a frequency‐domain acoustic‐elastic coupled waveform inversion based on the Gauss‐Newton conjugate gradient method. Despite the use of a high‐performance computer system and a state‐of‐the‐art parallel computation algorithm, it remained computationally prohibitive to calculate the approximate Hessian explicitly for a large‐scale inverse problem. Therefore, we adopted the conjugate gradient least‐squares algorithm, which is frequently used for geophysical inverse problems, to implement the Gauss‐Newton method so that the approximate Hessian is calculated implicitly. Thus, there was no need to store the Hessian matrix. By simultaneously back‐propagating multi‐components consisting of the pressure and displacements, we could efficiently extract information on the subsurface structures. To verify our algorithm, we applied it to synthetic data sets generated from the Marmousi‐2 model and the modified SEG/EAGE salt model. We also extended our algorithm to the ocean‐bottom cable environment and verified it using ocean‐bottom cable data generated from the Marmousi‐2 model. With the assumption of a hard seafloor, we recovered both the P‐wave velocity of complicated subsurface structures as well as the S‐wave velocity. Although the inversion of the S‐wave velocity is not feasible for the high Poisson's ratios used to simulate a soft seafloor, several strategies exist to treat this problem. Our example using multi‐component data showed some promise in mitigating the soft seafloor effect. However, this issue still remains open.     

Acoustic full waveform inversion of synthetic land and marine data in the Laplace domain

Elastic waves, such as Rayleigh and mode‐converted waves, together with amplitude versus offset variations, serve as noise in full waveform inversion using the acoustic approximation. Heavy preprocessing must be applied to remove elastic effects to invert land or marine data using the acoustic inversion method in the time or frequency domains. Full waveform inversion using the elastic wave equation should be one alternative; however, multi‐parameter inversion is expensive and sensitive to the starting velocity model. We implement full acoustic waveform inversion of synthetic land and marine data in the Laplace domain with minimum preprocessing (i.e., muting) to remove elastic effects. The damping in the Laplace transform can be thought of as an automatic time windowing. Numerical examples show that Laplace‐domain acoustic inversion can yield correct smooth velocity models even with the noise originating from elastic waves. This offers the opportunity to develop an accurate smooth starting model for subsequent inversion in the frequency domain.     

Surface‐wave inversion for a P‐velocity profile with a constant depth gradient of the squared slowness

Surface waves are often used to estimate a near‐surface shear‐velocity profile. The inverse problem is solved for the locally one‐dimensional problem of a set of homogeneous horizontal elastic layers. The result is a set of shear velocities, one for each layer. To obtain a P‐wave velocity profile, the P‐guided waves should be included in the inversion scheme. As an alternative to a multi‐layered model, we consider a simple smooth acoustic constant‐density velocity model, which has a negative constant vertical depth gradient of the squared P‐wave slowness and is bounded by a free surface at the top and a homogeneous half‐space at the bottom. The exact solution involves Airy functions and provides an analytical expression for the dispersion equation. If the ratio is sufficiently small, the dispersion curves can be picked from the seismic data and inverted for the continuous P‐wave velocity profile. The potential advantages of our model are its low computational cost and the fact that the result can serve as a smooth starting model for full‐waveform inversion. For the latter, a smooth initial model is often preferred over a rough one. We test the inversion approach on synthetic elastic data computed for a single‐layer P‐wave model and on field data, both with a small ratio. We find that a single‐layer model can recover either the shallow or deeper part of the profile but not both, when compared with the result of a multi‐layer inversion that we use as a reference. An extension of our analytic model to two layers above a homogeneous half‐space, each with a constant vertical gradient of the squared P‐wave slowness and connected in a continuous manner, improves the fit of the picked dispersion curves. The resulting profile resembles a smooth approximation of the multi‐layered one but contains, of course, less detail. As it turns out, our method does not degrade as gracefully as, for instance, diving‐wave tomography, and we can only hope to fit a subset of the dispersion curves. Therefore, the applicability of the method is limited to cases where the ratio is small and the profile is sufficiently simple. A further extension of the two‐layer model to more layers, each with a constant depth gradient of the squared slowness, might improve the fit of the modal structure but at an increased cost.     

Quantitative imaging of complex structures from dense wide-aperture seismic data by multiscale traveltime and waveform inversions: a case study

An integrated multiscale seismic imaging flow is applied to dense onshore wide‐aperture seismic data recorded in a complex geological setting (thrust belt). An initial P‐wave velocity macromodel is first developed by first‐arrival traveltime tomography. This model is used as an initial guess for subsequent full‐waveform tomography, which leads to greatly improved spatial resolution of the P‐wave velocity model. However, the application of full‐waveform tomography to the high‐frequency part of the source bandwidth is difficult, due to the non‐linearity of this kind of method. Moreover, it is computationally expensive at high frequencies since a finite‐difference method is used to model the wave propagation. Hence, full‐waveform tomography was complemented by asymptotic prestack depth migration to process the full‐source bandwidth and develop a sharp image of the short wavelengths. The final traveltime tomography model and two smoothed versions of the final full‐waveform tomography model were used as a macromodel for the prestack depth migration. In this study, wide‐aperture multifold seismic data are used. After specific preprocessing of the data, 16 frequency components ranging from 5.4 Hz to 20 Hz were inverted in cascade by the full‐waveform tomography algorithm. The full‐waveform tomography successfully imaged SW‐dipping structures previously identified as high‐resistivity bodies. The relevance of the full‐waveform tomography models is demonstrated locally by comparison with a coincident vertical seismic profiling (VSP) log available on the profile. The prestack depth‐migrated images, inferred from the traveltime, and the smoothed full‐waveform tomography macromodels are shown to be, on the whole, consistent with the final full‐waveform tomography model. A more detailed analysis, based on common‐image gather computations, and local comparison with the VSP log revealed that the most accurate migrated sections are those obtained from the full‐waveform tomography macromodels. A resolution analysis suggests that the asymptotic prestack depth migration successfully migrated the wide‐aperture components of the data, allowing medium wavelengths in addition to the short wavelengths of the structure to be imaged. The processing flow that we applied to dense wide‐aperture seismic data is shown to provide a promising approach, complementary to more classical seismic reflection data processing, to quantitative imaging of complex geological structures.     

A nonlinear method for multiparameter inversion of pre‐stack seismic data based on anisotropic Markov random field

Multiparameter inversion for pre‐stack seismic data plays a significant role in quantitative estimation of subsurface petrophysical properties. However, it remains a complicated problem due to the non‐unique results and unstable nature of the processing; the pre‐stack seismic inversion problem is ill‐posed and band‐limited. Combining the full Zoeppritz equation and additional assumptions with edge‐preserving regularisation can help to alleviate these problems. To achieve this, we developed an inversion method by constructing a new objective function that includes edge‐preserving regularisation and soft constraints based on anisotropic Markov random fields and is intended especially for layered formations. We applied a fast simulated annealing algorithm to solve the nonlinear optimisation problem. The method directly obtains reflectivity R_PP values using the full Zoeppritz equation instead of its approximations and effectively controls the stability of the multiparameter inversion by assuming a sectionally constant S‐ and P‐wave velocity ratio and using the generalised Gardner equation. We substituted the inverted parameters, i.e., the P‐wave velocity, the fitting deviation of S‐wave velocity, and the density were inverted instead of the P‐wave velocity, the S‐wave velocity, and the density, and the generalised Gardner equation was applied as a constraint. Test results on two‐dimensional synthetic data indicated that our substitution obtained improved results for multiparameter inversion. The inverted results could be improved by utilising high‐order anisotropic Markov random field neighbourhoods at early stages and low‐order anisotropic Markov random field neighbourhoods in the later stages. Moreover, for layered formations, using a large horizontal weighting coefficient can preserve the lateral continuity of layers, and using a small vertical weighting coefficient allows for large longitudinal gradients of the interlayers. The inverted results of the field data revealed more detailed information about the layers and matched the logging curves at the wells acceptably over most parts of the curves.     

2D acoustic‐elastic coupled waveform inversion in the Laplace domain

Although waveform inversion has been intensively studied in an effort to properly delineate the Earth's structures since the early 1980s, most of the time‐ and frequency‐domain waveform inversion algorithms still have critical limitations in their applications to field data. This may be attributed to the highly non‐linear objective function and the unreliable low‐frequency components. To overcome the weaknesses of conventional waveform inversion algorithms, the acoustic Laplace‐domain waveform inversion has been proposed. The Laplace‐domain waveform inversion has been known to provide a long‐wavelength velocity model even for field data, which may be because it employs the zero‐frequency component of the damped wavefield and a well‐behaved logarithmic objective function. However, its applications have been confined to 2D acoustic media. We extend the Laplace‐domain waveform inversion algorithm to a 2D acoustic‐elastic coupled medium, which is encountered in marine exploration environments. In 2D acoustic‐elastic coupled media, the Laplace‐domain pressures behave differently from those of 2D acoustic media, although the overall features are similar to each other. The main differences are that the pressure wavefields for acoustic‐elastic coupled media show negative values even for simple geological structures unlike in acoustic media, when the Laplace damping constant is small and the water depth is shallow. The negative values may result from more complicated wave propagation in elastic media and at fluid‐solid interfaces. Our Laplace‐domain waveform inversion algorithm is also based on the finite‐element method and logarithmic wavefields. To compute gradient direction, we apply the back‐propagation technique. Under the assumption that density is fixed, P‐ and S‐wave velocity models are inverted from the pressure data. We applied our inversion algorithm to the SEG/EAGE salt model and the numerical results showed that the Laplace‐domain waveform inversion successfully recovers the long‐wavelength structures of the P‐ and S‐wave velocity models from the noise‐free data. The models inverted by the Laplace‐domain waveform inversion were able to be successfully used as initial models in the subsequent frequency‐domain waveform inversion, which is performed to describe the short‐wavelength structures of the true models.     

Quantitative imaging of the Permo‐Mesozoic complex and its basement by frequency domain waveform tomography of wide‐aperture seismic data from the Polish Basin

In this study we present the workflow and results of 2D frequency domain waveform tomography applied to the global‐offset seismic data acquired in central Poland along a 50‐km long profile during the GRUNDY 2003 experiment. The waveform tomography method allows full exploitation of the wide‐aperture content of these data and produces in a semi‐automatic way both the detailed P‐wave velocity model and the structural image (i.e., perturbations in respect to the starting model). Thirteen frequencies ranging from 4 to 16 Hz were inverted sequentially, gradually introducing higher wavenumbers and more details into the velocity models. Although the data were characterised by relatively large shot spacings (1.5 km), we obtained clear images both of the Mesozoic and Permian sedimentary cover. Velocity patterns indicated facies changes within the Jurassic and Zechstein strata. A high velocity layer (ca. 5500 m/s) was found near the base of Triassic (Scythian), which made the imaging of a deeper layer difficult. Nevertheless, we were able to delineate the base of the Permian (i.e., base of the Rotliegend), which was not possible to derive from conventional common‐depth‐point processing, as well as some deeper events, attributed to the Carboniferous. The sub‐Permian events formed a syn‐form which favoured our previous interpretation of a depression filled with Upper Carboniferous molasse. The validity of the waveform tomography‐derived model was confirmed by well‐log data. Forward ray‐tracing modelling and synthetic seismograms calculations provided another justification for the key structures present in the waveform tomography model.     

Feasibility study for an anisotropic full waveform inversion of cross‐well seismic data

Anisotropy is often observed due to the thin layering or aligned micro‐structures, like small fractures. At the scale of cross‐well tomography, the anisotropic effects cannot be neglected. In this paper, we propose a method of full‐wave inversion for transversely isotropic media and we test its robustness against structured noisy data. Optimization inversion techniques based on a least‐square formalism are used. In this framework, analytical expressions of the misfit function gradient, based on the adjoint technique in the time domain, allow one to solve the inverse problem with a high number of parameters and for a completely heterogeneous medium. The wave propagation equation for transversely isotropic media with vertical symmetry axis is solved using the finite difference method on the cylindrical system of coordinates. This system allows one to model the 3D propagation in a 2D medium with a revolution symmetry. In case of approximately horizontal layering, this approximation is sufficient. The full‐wave inversion method is applied to a crosswell synthetic 2‐component (radial and vertical) dataset generated using a 2D model with three different anisotropic regions. Complex noise has been added to these synthetic observed data. This noise is Gaussian and has the same amplitude f?k spectrum as the data. Part of the noise is localized as a coda of arrivals, the other part is not localized. Five parameter fields are estimated, (vertical) P‐wave velocity, (vertical) S‐wave velocity, volumetric mass and the Thomsen anisotropic parameters epsilon and delta. Horizontal exponential correlations have been used. The results show that the full‐wave inversion of cross‐well data is relatively robust for high‐level noise even for second‐order parameters such as Thomsen epsilon and delta anisotropic parameters.