Outline volcanic history of the region west of Vatnajökull, Central Iceland

This paper outlines the structure and volcanic geology of a 25 × 50 km region of central Iceland including part of the eastern neovolcanic zone and its western margin. It includes an extinct Brunhes epoch silicic centre, the Hagangas, offset en échelon from a zone of major postglacial basaltic activity forming a northeasterly extension of the Torfajökull centre. Stratigraphic subdivisions restricted to the last 690,000 years comprise, in order of decreasing age, interglacial flood tholeiites, major centres of intraglacial hyaloclastite eruption, and postglacial lavas, which are mostly olivine basalts. The Hagangas centre and interglacial tholeiites lie on crust predominantly of Matuyama age (0.69–2.30 m.y.) but the bulk of the present volcanic activity may be taking place through crust belonging entirely to the present polarity epoch; this latter zone is characterised by normal faulting and extensive hydrothermal alteration. The widespread hydrothermal alteration and voluminous basaltic eruption distinguish this neovolcanic zone from the western zone, and the relationship of the region to growth of the upper crust in Iceland is briefly discussed.     

Seismic constraints on magma chambers at Hekla and Torfajökull volcanoes,Iceland

Hekla and Torfajökull are active volcanoes at a rift–transform junction in south Iceland. Despite their location next to each other they are physically and geologically very different. Hekla is an elongate stratovolcano, built mainly of basaltic andesite. Torfajökull is a prominent rhyolitic centre with a 12-km-diameter caldera and extensive geothermal activity. The scope of this study is to examine the propagation of body waves of local earthquakes across the Hekla–Torfajökull area and look for volumes of anomalous S-wave attenuation, which can be evidence of magma chambers. So far the magma chamber under Hekla has been modelled with various geophysical means, and its depth has been estimated to be 5–9 km. A data set of 118 local earthquakes, providing 663 seismic rays scanning Hekla and Torfajökull, was used in this study. The major part, 650 seismograms, did not show evidence for S-wave attenuation under these volcanoes. Only six seismograms had clear signs of S-wave attenuation and seven seismograms were uncertain cases. The data set samples Hekla well at depths of 8–14 km, and south part of it also at 4–8 km and 14–16 km. Western Torfajökull is sampled well at depths of 4–14 km, eastern and southern Torfajökull at 6–12 km. Conclusions cannot be drawn regarding the existence of magma beyond these depth ranges. Also, magma volumes of smaller dimensions than about 800 m cannot be detected with this method. If a considerable molten volume exists under Hekla, it must be located either above 4 km or below 14 km. The former possibility seems unlikely, because Hekla lacks geothermal activity and persistent seismicity, usually taken as expressions of a shallow magma chamber. An aseismic volume with a diameter of 4 km at the depth of 8 km in the west part of Torfajökull has been inferred in earlier studies and interpreted as evidence for a cooling magma chamber. Our results indicate that this volume cannot be molten to a great extent because S-waves travelling through it are not attenuated. Intense geothermal activity and low-frequency earthquakes are possibly signs of magma in the south part of Torfajökull, but a magma chamber was not detected there in the areas sampled by this study.Editorial responsibility: T. Druitt     

Pleistocene mass-flow deposits of basaltic hyaloclastite on a shallow submarine shelf,South Iceland

A Pleistocene subaqueous, volcanic sequence in South Iceland consists of flows of basaltic hyaloclastite and lava with interbedded sedimentary diamictite units. Emplacement occurred on a distal submarine shelf in drowned valleys along the southern coast of Iceland. The higher sea level was caused by eustatic sea-level change, probably towards the end of a glaciation. This sequence, nearly 700 m thick, rests unconformably on eroded flatlying lavas and sedimentary rocks of likely Tertiary age. A Standard Depositional Unit, describing the flows of hyaloclastite, starts with compact columnar-jointed basalt overlain by cubejointed basalt, and/or pillow lava. This in turn is overlain by thick unstructured hyaloclastite containing aligned basalt lobes, and bedded hyaloclastite at the top. A similar lithofacies succession is valid for proximal to distal locations. The flows were produced by repeated voluminous extrusions of basaltic lava from subaquatic fissures on the Eastern Rift Zone of Iceland. The fissures are assumed to lie in the same general area as the 1783 Laki fissure which produced 12 km³ of basaltic lava. Due to very high extrusion rates, the effective water/melt ratio was low, preventing optimal fragmentation of the melt. The result was a heterogeneous mass of hyaloclastite and fluid melt which moved en masse downslope with the melt at the bottom of the flow and increasingly vesicular hyaloclastite fragments above. The upper and distal parts of the flow moved as low-concentration turbulent suspensions that deposited bedded hyaloclastite.     

Englacial vs lacustrine origin of volcanic table mountains: evidence from iceland

Detailed facies analysis of hyaloclastites and associated lavas from eight table mountains and similar "hyaloclastite volcanoes" in the Icelandic rift zone contradict a rapid and continuous, "monogenetic", entirely subglacial evolution of most volcanoes studied. The majority of the exposed hyaloclastite deposits formed in large, stable lakes as indicated by widespread, up to 300-m-thick, continuous sections of deep water, shallow water and emergent facies. Salient features include extensively layered or bedded successions comprising mainly debris flow deposits, turbidites, base surge and fallout deposits consisting of texturally and compositionally variable, slightly altered hyaloclastites, as well as sheet and pillow lavas. In contrast, chaotic assemblages of coarser-grained, more poorly sorted and more strongly palagonitized hyaloclastite tuffs and breccias, as well as scoria and lava are interpreted to have formed under sub- or englacial conditions in small, chimney-like ice cavities or ice-bound lakes. Irregularly shaped and erratically arranged hyaloclastite bodies produced at variable water levels appear to have resulted mainly from rapid changes of the eruptive environment due to repeated build-up and drainage of ice-bound lakes as well as the restricted space between the ice walls. We distinguish a "deep water" facies formed during high water levels of the lake, a hydroclastic shallow water and emergent facies (leakage of the lake or growth of the volcano above the water surface). Our model implies the temporary existence of large, stable lakes in Iceland probably formed by climatically induced ice melting. The highly complex edifices of many table mountains and similar volcanoes were constructed during several eruptive periods in changing environments characterized by contrasting volcanic and sedimentary processes. Received: 10 June 1997 / Accepted: 28 July 1998     

Generation of Icelandic rhyolites: silicic lavas from the Torfajökull central volcano

The Torfajökull central volcano in south-central Iceland contains the largest volume of exposed silicic extrusives in Iceland (225 km³). Within SW-Torfajökull, postglacial mildly alkalic to peralkalic silicic lavas and lava domes (67–74 wt.% SiO₂) have erupted from a family of fissures 1–2.5 km apart within or just outside a large caldera (12×18 km). The silicic lavas show a fissure-dependent variation in composition, and form five chemically distinct units. The lavas are of low crystallinity (0–7 vol.%) and contain phenocrysts in the following order of decreasing abundance: plagioclase (An_10-40), Na-rich anorthoclase (<Or₂₃), clinopyroxene (Fs_37-20), FeTi oxides (Usp_32-60; Ilm_93-88), hornblende (edenitic–ferroedenitic) and olivine (Fo_22-37), with apatite, pyrrhotite and zircon as accessory phases. The phenocryst assemblage (0.2–4.0 mm) consistently exhibits pervasive disequilibrium with the host melt (glass). Xenoliths include sparse, disaggregated, and partially fused leucocratic fragments as well as amphibole-bearing rocks of broadly intermediate composition. The values of the silicic lavas are in the range 3.6–4.4, and these are lower than the values of comagmatic, contemporaneous basaltic extrusives within SW-Torfajökull, implying that the former can not be derived from the latter by simple fractional crystallization. FeTi-oxide geothermometry reveals temperatures as low as 750–800°C. To explain the fissure-dependent chemical variations, depletions, low FeTi-oxide temperatures and pervasive crystal-melt disequilibrium, we propose the extraction and collection of small parcels of silicic melt from originally heterogeneous basaltic crustal rock through heterogeneous melting and wall rock collapse (solidification front instability, SFI). The original compositional heterogeneity of the source rock is due to (1) silicic segregations, in the form of pods and lenses characteristically formed in the upper parts of gabbroic intrusives, and (2) extreme isostatic subsidence of the earlier, less differentiated lavas of the Torfajökull central volcano. Ridge migration into older crustal terranes, coupled with establishment of concentrated volcanism at central volcanoes like Torfajökull due to propagating regional fissure swarms, supplies the heat source for this overall process. Continued magmatism in these fissures promotes extensive prograde heating of older crust and the progressive vitality and rise of the central volcano magmatic system that leads to, respectively, SFI and subsidence melting. The ensuing silicic melts (with relict crystals) are extracted, collected and extruded before reaching complete internal equilibrium. Chemically, this appears as a two-stage process of crystal fractionation. In general, the accumulation of high-temperature basaltic magmas at shallow depths beneath the Icelandic rift zones and major central volcanoes, coupled with unique tectonic conditions, allows large-scale reprocessing and recycling of the low- , hydrothermally altered Icelandic crust. The end result is a compositionally bimodal proto-continental crust.     

Caldera subsidence in extensional tectonics

A 45-km-long regional dike was emplaced over a period of 2 weeks in August 2014 at the boundary between the East and North Volcanic Zones in Iceland. This is the first regional dike emplacement in Iceland monitored with modern geophysical networks, the importance of which relates to regional dikes feeding most of the large fissure (e.g., Eldgja 934 and Laki 1783) and lava shield (e.g. early Holocene Skjaldbreidur and Trölladyngja) eruptions. During this time, the dike generated some 17,000 earthquakes, more than produced in Iceland as a whole over a normal year. The dike initiated close to the Bardarbunga Volcano but gradually extended to the northeast until it crossed the boundary between the East Volcanic Zone (EVZ) and the North Volcanic Zone (NVZ). We infer that the strike of the dike changes abruptly at a point, from about N45°E (coinciding with the trend of the EVZ) to N15°E (coinciding with the trend of the NVZ). This change in strike occurs at latitude 64.7°, exactly the same latitude at which about 10 Ma dikes in East Iceland change strike in a similar way. This suggests that the change in the regional stress field from the southern to the northern part of Iceland has been maintained at this latitude for 10 million years. Analytical and numerical models indicate that the dike-induced stress field results in stress concentration around faults and particularly shallow magma chambers and calderas in its vicinity, such as Tungnafellsjökull, Kverkfjöll, and Askja. In particular, the dike has induced high compressive, shear, and tensile stresses at the location of the Bardarbunga shallow chamber and (caldera) ring-fault where numerous earthquakes occurred during the dike emplacement, many of which have exceeded M5 (the largest M5.7). The first segment of the dike induced high tensile stresses in the nearby part of the Bardarbunga magma chamber/ring-fault resulting in radially outward injection of a dike from the chamber at a high angle to the strike of the regional dike. The location of maximum stress at Bardarbunga fluctuates along the chamber/ring-fault boundary in harmony with dike size and/or pressure changes and encourages ring-dike formation and associated magma flow within the chamber. Caldera collapse and/or eruption in some of these volcanoes is possible, most likely in Bardarbunga, but depends largely on the future development of the regional dike.     

Evolution of Icelandic central volcanoes: evidence from the Austurhorn intrusion,southeastern Iceland

The Austurhorn intrusive complex in southeastern Iceland represents an exhumed Tertiary central volcano. The geometry of the intrusion and geochemistry of the mafic and felsic rocks indicate Austurhorn was a volcanic center analogous to Eyjafjallajökull and Torfajökull in Iceland's eastern neovolcanic zone (EVZ). Early transitional tholeiitic basalt magmatism at Austurhorn formed a shallow crustal chamber 5 km in diameter. Apparent rhythmic modal layering of, and intrusive contacts within, the gabbro indicate the mafic chamber was replenished frequently as it cooled and crystallized. Felsic activity postdated near-solidification of the gabbro; numerous granitic magmas intruded along gabbro margins and within the adjacent crust. Field relations indicate that infrequent felsic replenishment prevented convective mixing of the Austurhorn chamber during this time, although commingled mafic and felsic magmas are observed in an extensive net veined complex. Late stage mafic dikes intrude the entire complex, suggesting that magmatic heat was abundantly available throughout the evolution of the Austurhorn system. Plagioclase and clinopyroxene compositions in mafic through felsic rocks, including gabbros, support a model of progressive differentiation. Field relations constrain the felsic magmas to originate at P1 kbar, presumably by fractional crystallization. The structure and geochemistry of the Austurhorn intrusive complex suggest formation in an immature rift environment similar to the modern EVZ. The proposed rift segment was parallel to the western and eastern neovolcanic zones, and probably resulted from a reorganization of plate boundaries 7 Ma (Saemundsson 1979; Helgason 1985; Jancin et al. 1985) triggered by activity of the Iceland mantle plume.     

Intraglacial volcanism in the Western Volcanic Zone, Iceland

The Western Volcanic Zone in Iceland (64.19° to 65.22° N) has the morphological characteristics of a distinct Mid-Atlantic ridge segment. This volcanic zone was mapped at a scale of 1:36.000, and 258 intraglacial monogenetic volcanoes from the Late Pleistocene (0.01–0.78?Ma) were identified and investigated. The zone is characterized by infrequent comparatively large volcanic eruptions and the overall volcanic activity appears to have been low throughout the Late Pleistocene. Tholeiitic basaltic rocks dominate in the Western Volcanic Zone with about 0.5?vol.?% of intermediate and silicic rocks. The basalts divide into picrites, olivine tholeiites, and tholeiites. Three main eruptive phases can be distinguished in the intraglacial volcanoes: an effusive deep-water lava phase producing basal pillow lavas, an explosive shallow-water phase producing hyaloclastites and an effusive subaerial capping lava phase. Three evolutionary stages therefore charcterize these volcanoes; late dykes and irregular minor intrusions could be added as the fourth main stage. These intrusions are potential heat sources for short-lived hydrothermal systems and may play an important role in the final shaping of the volcanoes. Substantial parts of the hyaloclastites of each unit are proximal sedimentary deposits. The intraglacial volcanoes divide into two main morphological groups, ridge-shaped volcanoes, i.e., tindars (including pillow lava ridges) and subrectangular volcanoes, i.e., tuyas and hyaloclastite or pillow lava mounds. The volume of the tuyas is generally much larger than that of the tindars. The largest tuya, Eiríksj?kull, is about 48?km³ and therefore the largest known monogenetic volcano in Iceland. Many of the large volcanoes, both tuyas and tindars, show a similar, systematic range in geochemistry. The most primitive compositions were erupted first and the magmas then changed to more differentiated compositions. The ridge-shaped tindars clearly erupted from volcanic fissures and the more equi-dimensional tuyas mainly from a single crater. It is suggested that the morphology and structure of the intraglacial volcanos mainly depends on two factors, (a) tectonic control and (b) availability of magma at the time of eruption.     

Volcanism in Iceland in historical time: Volcano types,eruption styles and eruptive history

The large-scale volcanic lineaments in Iceland are an axial zone, which is delineated by the Reykjanes, West and North Volcanic Zones (RVZ, WVZ, NVZ) and the East Volcanic Zone (EVZ), which is growing in length by propagation to the southwest through pre-existing crust. These zones are connected across central Iceland by the Mid-Iceland Belt (MIB). Other volcanically active areas are the two intraplate belts of Öræfajökull (ÖVB) and Snæfellsnes (SVB). The principal structure of the volcanic zones are the 30 volcanic systems, where 12 are comprised of a fissure swarm and a central volcano, 7 of a central volcano, 9 of a fissure swarm and a central domain, and 2 are typified by a central domain alone.Volcanism in Iceland is unusually diverse for an oceanic island because of special geological and climatological circumstances. It features nearly all volcano types and eruption styles known on Earth. The first order grouping of volcanoes is in accordance with recurrence of eruptions on the same vent system and is divided into central volcanoes (polygenetic) and basalt volcanoes (monogenetic). The basalt volcanoes are categorized further in accordance with vent geometry (circular or linear), type of vent accumulation, characteristic style of eruption and volcanic environment (i.e. subaerial, subglacial, submarine).Eruptions are broadly grouped into effusive eruptions where >95% of the erupted magma is lava, explosive eruptions if >95% of the erupted magma is tephra (volume calculated as dense rock equivalent, DRE), and mixed eruptions if the ratio of lava to tephra occupy the range in between these two end-members. Although basaltic volcanism dominates, the activity in historical time (i.e. last 11 centuries) features expulsion of basalt, andesite, dacite and rhyolite magmas that have produced effusive eruptions of Hawaiian and flood lava magnitudes, mixed eruptions featuring phases of Strombolian to Plinian intensities, and explosive phreatomagmatic and magmatic eruptions spanning almost the entire intensity scale; from Surtseyan to Phreatoplinian in case of “wet” eruptions and Strombolian to Plinian in terms of “dry” eruptions. In historical time the magma volume extruded by individual eruptions ranges from ∼1 m³ to ∼20 km³ DRE, reflecting variable magma compositions, effusion rates and eruption durations.All together 205 eruptive events have been identified in historical time by detailed mapping and dating of events along with extensive research on documentation of eruptions in historical chronicles. Of these 205 events, 192 represent individual eruptions and 13 are classified as “Fires”, which include two or more eruptions defining an episode of volcanic activity that lasts for months to years. Of the 159 eruptions verified by identification of their products 124 are explosive, effusive eruptions are 14 and mixed eruptions are 21. Eruptions listed as reported-only are 33. Eight of the Fires are predominantly effusive and the remaining five include explosive activity that produced extensive tephra layers. The record indicates an average of 20–25 eruptions per century in Iceland, but eruption frequency has varied on time scale of decades. An apparent stepwise increase in eruption frequency is observed over the last 1100 years that reflects improved documentation of eruptive events with time. About 80% of the verified eruptions took place on the EVZ where the four most active volcanic systems (Grímsvötn, Bárdarbunga–Veidivötn, Hekla and Katla) are located and 9%, 5%, 1% and 0.5% on the RVZ–WVZ, NVZ, ÖVB, and SVB, respectively. Source volcano for ∼4.5% of the eruptions is not known.Magma productivity over 1100 years equals about 87 km³ DRE with basaltic magma accounting for about 79% and intermediate and acid magma accounting for 16% and 5%, respectively. Productivity is by far highest on the EVZ where 71 km³ (∼82%) were erupted, with three flood lava eruptions accounting for more than one half of that volume. RVZ–WVZ accounts for 13% of the magma and the NWZ and the intraplate belts for 2.5% each. Collectively the axial zone (RVZ, WVZ, NVZ) has only erupted 15–16% of total magma volume in the last 1130 years.     

Nature and origin of cone-forming volcanic breccias in the Te Herenga Formation, Ruapehu, New Zealand

 Volcanic breccias form large parts of composite volcanoes and are commonly viewed as containing pyroclastic fragments emplaced by pyroclastic processes or redistributed as laharic deposits. Field study of cone-forming breccias of the andesitic middle Pleistocene Te Herenga Formation on Ruapehu volcano, New Zealand, was complemented by paleomagnetic laboratory investigation permitting estimation of emplacement temperatures of constituent breccia clasts. The observations and data collected suggest that most breccias are autoclastic deposits. Five breccia types and subordinate, coherent lava-flow cores constitute nine, unconformity-bounded constructional units. Two types of breccia are gradational with lava-flow cores. Red breccias gradational with irregularly shaped lava-flow cores were emplaced at temperatures in excess of 580  °C and are interpreted as aa flow breccias. Clasts in gray breccia gradational with tabular lava-flow cores, and in some places forming down-slope-dipping avalanche bedding beneath flows, were emplaced at varying temperatures between 200 and 550  °C and are interpreted as forming part of block lava flows. Three textural types of breccia are found in less intimate association with lava-flow cores. Matrix-poor, well-sorted breccia can be traced upslope to lava-flow cores encased in autoclastic breccia. Unsorted boulder breccia comprises constructional units lacking significant exposed lava-flow cores. Clasts in both of these breccia types have paleomagnetic properties generally similar to those of the gray breccias gradational with lava-flow cores; they indicate reorientation after acquisition of some, or all, magnetization and ultimate emplacement over a range of temperatures between 100 and 550  °C. These breccias are interpreted as autoclastic breccias associated with block lava flows. Matrix-poor, well-sorted breccia formed by disintegration of lava flows on steep slopes and unsorted boulder breccia is interpreted to represent channel-floor and levee breccias for block lava flows that continued down slope. Less common, matrix-rich, stratified tuff breccias consisting of angular blocks, minor scoria, and a conspicuously well-sorted ash matrix were generally emplaced at ambient temperature, although some deposits contain clasts possibly emplaced at temperatures as high as 525  °C. These breccias are interpreted as debris-flow and sheetwash deposits with a dominant pyroclastic matrix and containing clasts likely of mixed autoclastic and pyroclastic origin. Pyroclastic deposits have limited preservation potential on the steep, proximal slopes of composite volcanoes. Likewise, these steep slopes are more likely sites of erosion and transport by channeled or unconfined runoff rather than depositional sites for reworked volcaniclastic debris. Autoclastic breccias need not be intimately associated with coherent lava flows in single outcrops, and fine matrix can be of autoclastic rather than pyroclastic origin. In these cases, and likely many other cases, the alternation of coherent lava flows and fragmental deposits defining composite volcanoes is better described as interlayered lava-flow cores and cogenetic autoclastic breccias, rather than as interlayered lava flows and pyroclastic beds. Reworked deposits are probably insignificant components of most proximal cone-forming sequences. Received: 1 October 1998 / Accepted: 28 December 1998     

Evolution of Aoba caldera volcano,New Hebrides

Aoba is a basalt volcano situated in the northern part of a chain containing all the active volcanoes in the New Hebrides. The chain extends the length of the New Hebrides. Growing from a depth of 2,400 meters on the sea floor, the volcano probably emerged above sea level in the late Pliocene or early Pleistocene. The age of the oldest exposed rocks is unknown. Relatively fluid lavas with autobrecciated surfaces probably issued from tissures, initiating a shield-building stage as the volcano emerged. Airfall pyroclastics increase towards the top of these lavas and are overlain by agglomerates marking a more explosive episode. Activity continued with the effusion of picrite basalt, accompanied by spasms of ash emission that formed crystal tuff. Subsequently a more explosive episode produced agglomerate and tuff with occasional tongues of lava. The two oval summit calderas are apparently related to deep-seated subsidence. Lack of pumice deposits, and the basic nature of the magma suggest that the foundering of the calderas was a quiet event, possibly due to massive outpourings of lava at a lower level, although a substantial volume also erupted from the summit volcanoes at this time. A broad pyroclastic cone, which was still growing 360 years ago, occupies the centre of the inner caldera. It is surmounted by a wide crater, or possibly small caldera, containing a lake in which palagonite tuff cones have formed. The western end of the inner caldera is occupied by an explosion crater, and the eastern end by a semicircular lake. A thermal area containing a solfatara on the southeast shore of the eastern lake, and staining in the crater lake suggestive of fumarole activity, are the only evidence of vulcanicity at the present time. It is difficult to correlate events at the centre of the volcano with those at the lateral fissures. Later episodes at the centre are probably broadly contemporaneous with activity along the fissures, the inner ends of which are mantled by younger deposits of the central volcano. Accumulation of material about this axial fiissure system, marked by no less than 64 cruptive foci, mainly spatter cones, and phreatic explosion craters where they intersect the coast, has extended the island to the northeast and southwest, producing the present oval shape. Numerous flows spilled from these fissures, the last reaching the sea at N’dui N’dui only 300 years ago according to local legend. Abundant ash was emitted from both the summit calderas and flank fissures at a late stage, forming a tuff mantle with layers of accretionary lapilli. The last volcanic event was the formation of a lahar which destoyed a village on the northeast slope of the volcano about 100 years ago. No consistent variation with time is evident in the composition of the magma, although plagiophyric and aphyric lava erupted during the later stages. All the rocks are basaltic, and differ only in the presence or absence of phenocryst-forming minerals, and the proportions in which they occur. Picrite basalt and ankaramite erupted from the central volcano and flank fissures, respectively.     

Volcanic sands of Iceland ‐ Diverse origins of aeolian sand deposits revealed at Dyngjusandur and Lambahraun

The origin, formation and evolution of volcanic sands are less well known than the formation of the much more common quartz‐rich sand sheets. Combining active volcanism and a cold climate, Iceland is covered for about 21% of its surface by sandy areas. The sands were analyzed in detail at two sites and results reveal their diverse origins. The first site is Dyngjusandur, located north of Vatnajökull, and the second site is the Lambahraun area, located south of Langjökull. At both sites, the sand origin is determined from field observations (wind directions from ventifacts), chemical and mineralogical analyses of rocks and sands. At Dyngjusandur, the sand is dominated by glass grains, a situation typical of sand plains in Iceland. Hyaloclastite ridges presently buried beneath Vatnajökull are the dominant source of the sand, and only large size plagioclase crystals (0.5 cm) in sands seem to be derived from the lava flows. Hyaloclastite ridges were crushed by glaciers and mechanically eroded sediments were washed out by melt‐water onto flood plains. The sand chemical composition is spatially homogeneous and similar to the average composition of neighboring sub‐aerial lava flows, reflecting efficient mixing of distinct sources below the glacier. The presence of sand north of Dyngjujökull can be taken as a way to explore the average chemical composition of non‐exposed volcanic material beneath the glacier. In the case of Lambahraun, prevailing winds indicate several potential sources of sand at the north of the sand sheet. Comparison of chemical and mineralogical analyses of sands and rock samples helped to refine the exact origin. In contrast with the first site, the sand is dominated by crystals and is chemically consistent with a mixture of material derived from the lava flows of Eldborgir and Skersli shield volcanoes. Analysis of the contact between the lava flows and the glacier reveals that basaltic sand grains formed as the result of recent advances of the glacier abrading the rocks. The direct interaction of glacial and fluvio‐glacial activity with basaltic plains appears to be necessary to produce a large amount of sands in a relatively short period of time (<4000 years). This site appears to be an excellent natural laboratory for further studies concerning the sand evolution and physical sorting processes in basaltic material, which have important implications for understanding aeolian processes on Mars. Copyright © 2011 John Wiley & Sons, Ltd.     

Sulfur,chlorine, and fluorine degassing and atmospheric loading by the 1783–1784 AD Laki (Skaftár Fires) eruption in Iceland

 The 1783–1784 Laki tholeiitic basalt fissure eruption in Iceland was one of the greatest atmospheric pollution events of the past 250 years, with widespread effects in the northern hemisphere. The degassing history and volatile budget of this event are determined by measurements of pre-eruption and residual contents of sulfur, chlorine, and fluorine in the products of all phases of the eruption. In fissure eruptions such as Laki, degassing occurs in two stages: by explosive activity or lava fountaining at the vents, and from the lava as it flows away from the vents. Using the measured sulfur concentrations in glass inclusions in phenocrysts and in groundmass glasses of quenched eruption products, we calculate that the total accumulative atmospheric mass loading of sulfur dioxide was 122 Mt over a period of 8 months. This volatile release is sufficient to have generated ∼250 Mt of H₂SO₄ aerosols, an amount which agrees with an independent estimate of the Laki aerosol yield based on atmospheric turbidity measurements. Most of this volatile mass (∼60 wt.%) was released during the first 1.5 months of activity. The measured chlorine and fluorine concentrations in the samples indicate that the atmospheric loading of hydrochloric acid and hydrofluoric acid was ∼7.0 and 15.0 Mt, respectively. Furthermore, ∼75% of the volatile mass dissolved by the Laki magma was released at the vents and carried by eruption columns to altitudes between 6 and 13 km. The high degree of degassing at the vents is attributed to development of a separated two-phase flow in the upper magma conduit, and implies that high-discharge basaltic eruptions such as Laki are able to loft huge quantities of gas to altitudes where the resulting aerosols can reside for months or even 1–2 years. The atmospheric volatile contribution due to subsequent degassing of the Laki lava flow is only 18 wt.% of the total dissolved in the magma, and these emissions were confined to the lowest regions of the troposphere and therefore important only over Iceland. This study indicates that determination of the amount of sulfur degassed from the Laki magma batch by measurements of sulfur in the volcanic products (the petrologic method) yields a result which is sufficient to account for the mass of aerosols estimated by other methods. Received: 30 May 1995 / Accepted: 19 April 1996     

The fissure swarm of the Askja volcanic system along the divergent plate boundary of N Iceland

Divergent plate boundaries, such as the one crossing Iceland, are characterized by a high density of subparallel volcanic fissures and tectonic fractures, collectively termed rift zones, or fissure swarms when extending from a specific volcano. Volcanic fissures and tectonic fractures in the fissure swarms are formed during rifting events, when magma intrudes fractures to form dikes and even feeds fissure eruptions. We mapped volcanic fissures and tectonic fractures in a part of the divergent plate boundary in northern Iceland. The study area is ~1,800 km², located within and north of the Askja central volcano. The style of fractures changes with distance from Askja. Close to Askja the swarm is dominated by eruptive fissures. The proportion of tectonic fractures gets larger with distance from Askja. This may indicate that magma pressure is generally higher in dikes close to Askja than farther away from it. Volcanic fissures and tectonic fractures are either oriented away from or concentric with the 3–4 identified calderas in Askja. The average azimuth of fissures and fractures in the area deviates significantly from the azimuth perpendicular to the direction of plate velocity. As this deviation decreases gradually northward, we suggest that the effect of the triple junction of the North American, Eurasian and the Hreppar microplate is a likely cause for this deviation. Shallow, tectonic earthquakes in the vicinity of Askja are often located in a relatively unfractured area between the fissure swarms of Askja and Kverkfjöll. These earthquakes are associated with strike-slip faulting according to fault plane solutions. We suggest that the latest magma intrusions into either the Askja or the Kverkfjöll fissure swarms rotated the maximum stress axis from being vertical to horizontal, causing the formation of strike-slip faults instead of the dilatational fractures related to the fissure swarms. The activity in different parts of the Askja fissure swarm is uneven in time and switches between subswarms, as shown by a fissure swarm that is exposed in an early Holocene lava NW of Herðubreið but disappears under a younger (3500–4500 BP) lava flow. We suggest that the location of inflation centres in Askja central volcano controls into which part of the Askja fissure swarm a dike propagates. The size and amount of fractures in the Kollóttadyngja lava shield decrease with increasing elevation. We suggest that this occurred as the depth to the propagating dike(s) was greater under central Kollóttadyngja than under its flanks, due to topography.     

Silicic volcanism in Iceland: Composition and distribution within the active volcanic zones

Silicic volcanic rocks within the active volcanic zones of Iceland are mainly confined to central volcanoes. The volcanic zones of Iceland can be divided into rift zones and flank zones. Each of these zones contains several central volcanoes, most of which have produced minor amounts of silicic rocks. The silicic rocks occur as lavas and domes or as tephra layers, welded tuffs and ignimbrites, formed both in effusive and explosive eruptions. They tend to be glassy or very fine-grained, containing small amounts of phenocrysts. Plagioclase (andesine–oligoclase), anorthoclase or occasionally sanidine coexist with minerals such as augite, fayalite, pigeonite, orthopyroxene and magnetite. Quartz phenocrysts are exceedingly rare. Zoning of phenocrysts is limited and the pattern is variable. A set of 90 samples representing all active central volcanoes that have erupted silicic rocks was analysed for major- and trace-elements. The silicic rocks can be classified as dacites, trachytes, low-alkali rhyolites and alkalic rhyolites. Some of the trachytes and alkalic rhyolites are peralkaline (mostly comenditic). Trachytes and alkalic rhyolites are only found within the flank zones, while dacites and low-alkali rhyolites are mostly confined to the rift zones. The Icelandic rhyolites plot close to the thermal minimum in the “granite” system, while dacites and trachytes plot within the plagioclase field and towards the alkali feldspar temperature minimum. The silicic rocks are relatively Fe-rich and Ca-poor indicating low water pressure in the source. Trace element concentrations follow similar patterns in most central volcanoes. Exceptions are Torfajökull where silicic rocks display a negative correlation of Ba to Th and unusually high Th-contents, and the western flank zone where Ba-concentrations are highly variable. The ratios of different high field-strength elements are generally similar within each central volcano or region, which probably reflects different ratios in the source materials. Isotope systematics indicate that the silicic rocks are derived from older basaltic rocks similar to those from the same volcano, and that meteoric water has played a role in the genesis of the silicic rocks. Traditionally, the petrogenesis of silicic rocks in Iceland has been explained by various models of fractional crystallization or partial melting. The available data seems to be better explained by near-solidus differentiation than by near-liquidus differentiation. The silicic minimum melts can be extracted from the rigid framework of the near-solidus source by the process of solidification front instability or by deformation-assisted melt segregation. The source of the silicic rocks is within the intrusive complex beneath a central volcano rather than in a large, long-lived magma chamber.     

The geology of Mount Hasan stratovolcano, central Anatolia, Turkey

Mount Hasan is a double-peaked stratovolcano, located in Central Anatolia, Turkey. The magmas erupted from this multi-caldera complex range from basalt to rhyolite, but are dominated by andesite and dacite. Two terminal cones (Big Mt. Hasan and Small Mt. Hasan) culminate at 3253 m and 3069 m respectively. There are four evolutionary stages in the history of the volcanic complex (stage 1: Kecikalesi volcano, 13 Ma, stage 2: Palaeovolcano, 7 Ma, stage 3: Mesovolcano and stage 4: Neovolcano). The eruptive products consist of lava flows, lava domes, and pyroclastic rocks. The later include ignimbrites, phreatomagmatic intrusive breccias and nuées ardentes, sometimes reworked as lahars. The total volume is estimated to be 354 km³, the area extent 760 km². Textural and mineralogical data suggest that both magma mixing and fractional crystallization were involved in the generation of the andesites and dacites. The magmas erupted from the central volcanoes show a transition with time from tholeite to calc-alkaline. Three generations of basaltic strombolian cones and lava flows were emplaced contemporaneously with the central volcanoes. The corresponding lavas are alkaline with a sodic tendency.     

The isotopic composition of oxygen and carbon in the hyaloclastites from the Mt. Iblei volcanic area,Eastern Sicily: A preliminary study

Oxygen and carbon isotopic analyses were carried out for some typical submarine volcanic products (a lava flow, a pillow fragment and four hyaloclastite breccias) from the northwestern zone of the Mt. Iblei volcanic complex, eastern Sicily. The δ¹⁸O value of the perental basaltic magma (6.0 ± 0.2‰), estimated from the analyses of some fresh unaltered glassy samples of various type, lies in the values range of primary basalts. Appreciably higher δ¹⁸O values, probably due to low-temperature exchanges with sea water, have been found for lava samples and the interior of the pillow fragment. The δ¹⁸O and δ¹³C of the calcites of the groundmass of the hyaloclastite samples, ranging from 30.59 to 33.65 and from ?2.99 to 0.46‰ respectively, are typical of low-temperature marine carbonates. Because calcite is one of the last minerals to form. these results suggest that the hyaloclastites studied formed entirely in a submarine environment. The¹⁸O/¹⁶O ratios recorded in the silicate portions of the matrices of the hyaloclasites (δ¹⁸O=13.99 to 16.61) are interpreted as the result of halmyrolytic processes occurring at temperatures somewhat higher than that of the sea floor.     

Subglacial to emergent basaltic volcanism at Hlöðufell, south-west Iceland: A history of ice-confinement

Hlöðufell is a familiar 1186 m high landmark, located about 80 km northeast of Reykjavík, and 9 km south of the Langkjökull ice-cap in south-west Iceland. This is the first detailed study of this well-exposed and easily accessible subglacial to emergent basaltic volcano. Eight coherent and eleven volcaniclastic lithofacies are described and interpreted, and its evolution subdivided into four growth stages (I–IV) on the basis of facies architecture. Vents for stages I, II, and IV lie along the same fissure zone, which trends parallel to the dominant NNE–SSW volcano-tectonic axis of the Western Volcanic Zone in this part of Iceland, but the stage III vent lies to the north, and is probably responsible for the present N–S elongation of the volcano. The basal stage (I) is dominated by subglacially erupted lava mounds and ridges, which are of 240 m maximum thickness, were fed from short fissures and locally display lava tubes. Some of the stage I lavas preserve laterally extensive flat to bulbous, steep, glassy surfaces that are interpreted to have formed by direct contact with surrounding ice, and are termed ice-contact lava confinement surfaces. These surfaces preserve several distinctive structures, such as lava shelves, pillows that have one flat surface and mini-pillow (< 10 cm across) breakouts, which are interpreted to have formed by the interplay of lava chilling and confinement against ice, ice melting and ice fracture. The ice-contact lava confinement surfaces are also associated with zones of distinctive open cavities in the lavas that range from about 1 m to several metres across. The cavities are interpreted as having arisen by lava engulfing blocks of ice, that had become trapped in a narrow zone of meltwater between the lava and the surrounding ice, and are termed ice-block meltout cavities. The same areas of the lavas also display included and sometimes clearly rotated blocks of massive to planar to cross-stratified hyaloclastite lapilli tuffs and tuff–breccias, termed hyaloclastite inclusions, which are interpreted as engulfed blocks of hyaloclastite/pillow breccia carapace and talus, or their equivalents reworked by meltwater. Some of the stage I lavas are mantled at the southern end of the mountain by up to 35 m thickness of well-bedded vitric lapilli tuffs (stage II), of phreatomagmatic origin, which were erupted from a now dissected cone, preserved in this area. The tephra was deposited dominantly by subaqueous sediment gravity flows (density currents) in an ice-bound lake (or less likely a sub-ice water vault), and was also transported to the south by sub-ice meltwater traction currents. This cone is onlapped by a subaerial pahoehoe lava-fed delta sequence, formed during stage III, and which was most likely fed from a now buried vent(s), located somewhere in the north-central part of the mountain. A 150 m rise in lake level submerged the capping lavas, and was associated with progradation of a new pahoehoe lava-fed delta sequence, produced during stage IV, and which was fed from the present summit cone vent. The water level rise and onset of stage IV eruptions were not associated with any obviously exposed phreatomagmatic deposits, but they are most likely buried beneath stage IV delta deposits. Stage IV lava-fed deltas display steep benches, which do not appear to be due to syn- or post-depositional mass wasting, but were probably generated during later erosion by ice. The possibility that they are due to shorter progradation distances than the underlying stage III deltas, due to ice-confinement or lower volumes of supplied lava is also considered.     

New multibeam mapping and geochemistry of the 30°–35° S sector,and overview,of southern Kermadec arc volcanism

New multibeam mapping and whole-rock geochemistry establish the first order definition of the modern submarine Kermadec arc between 30° and 35° S. Twenty-two volcanoes with basal diameters > 5 km are newly discovered or fully-mapped for the first time; Giggenbach, Macauley, Havre, Haungaroa, Kuiwai, Ngatoroirangi, Sonne, Kibblewhite and Yokosuka. For each large volcano, edifice morphology and structure, surficial deposits, lava fields, distribution of sector collapses, and lava compositions are determined. Macauley and Havre are large silicic intra-oceanic caldera complexes. For both, concentric ridges on the outer flanks are interpreted as recording mega-bedforms associated with pyroclastic density flows and edifice foundering. Other stratovolcanoes reveal complex histories, with repeated cycles of tectonically controlled construction and sector collapse, extensive basaltic flow fields, and the development of summit craters and/or small nested calderas.Combined with existing data for the southernmost arc segment, we provide an overview of the spatial distribution and magmatic heterogeneity along ∼780 km of the Kermadec arc at 30°–36°30′ S. Coincident changes in arc elevation and lava composition define three volcano–tectonic segments. A central deeper segment at 32°20′–34°10′ S has basement elevations of > 3200 m water-depth, and relatively simple stratovolcanoes dominated by low-K series, basalt–basaltic andesite. In contrast, the adjoining arc segments have higher basement elevations (typically < 2500 m water-depth), multi-vent volcanic centres including caldera complexes, and erupt sub-equal proportions of dacite and basalt–basaltic andesite. The association of silicic magmas with higher basement elevations (and hence thicker crust), coupled with significant inter- and intra-volcano heterogeneity of the silicic lavas, but not the mafic lavas, is interpreted as evidence for dehydration melting of the sub-arc crust. Conversely, the crust beneath the deeper arc segments is thinner, initially cooler, and has not yet reached the thermal requirements for anatexis. Silicic calderas with diameters > 3 km coincide with the shallower arc segments. The dominant mode of large caldera formation is interpreted as mass-discharge pyroclastic eruption with syn-eruptive collapse. Hence, the shallower arc segments are characterized by both the generation of volatile-enriched magmas from crustal melting and a reduced hydrostatic load, allowing magma vesiculation and fragmentation to initiate and sustain pyroclastic eruptions. Proposed initiation parameters for submarine pyroclastic eruptions are water-depths < 1000 m, magmas with 5–6 wt.% water and > 70 wt.% SiO₂, and a high discharge rate.