The distribution of 137Cs in surface intertidal sediments from the Solway Firth

The distribution of ¹³⁷Cs from the Sellafield (Windscale) nuclear fuel reprocessing plant has been examined in detail in the surface intertidal sediments of the inner Solway Firth by means of a hovercraft-borne radiometric survey. With the exception of a belt of relatively active sands to the south of Silloth, caesium distribution is generally consistent with that of fine-grained sediment such that the highest concentrations occur in mud flat and salt marsh sediments which are most extensive in sheltered coastal embayments. ¹³⁷Cs activities in July 1980 were typically 2–30 pCi g^?1 but locally exceeded 50 pCi g^?1. These levels are considerably lower than those recorded in locations, such as the outer Solway and Ravenglass estuary, which are closer to the Sellafield outfall.     

Americium in intertidal sediments from the coastal environs of Windscale

The distribution of americium in surface intertidal sediments from a coastal environment near the Windscale nuclear fuel reprocessing plant has been investigated. The study includes data on the broadscale distribution of ²⁴¹Am in Northwest England, but focuses on the sediments of the Ravenglass estuary 10 km south of Windscale. The results indicate that americium concentrations in the inner estuary sediments are up to seven times higher than those from the Irish Sea itself. Americium distribution on silt banks is rather constant on a small scale, but varies considerably between adjacent silt bank and salt marsh areas.     

Modelling travel and residence times in the eastern Irish Sea

The Irish Sea, which lies between 51 degrees N-56 degrees N and 2 degrees 50'W-7 degrees W, provides a sheltered environment to exploit valuable fisheries resource. Anthropogenic activity is a real threat to its water quality. The majority of freshwater input down rivers flows into the eastern Irish Sea. The structure of the water circulation was not well understood during the planning of Sellafield nuclear plant outfall site in the eastern Irish Sea. A three-dimensional primitive equation numerical model was applied to the Irish Sea to simulate both barotropic and baroclinic circulation within the region. High accuracy was achieved with regard to the prediction of both tidal circulation and surface and nearbed water temperatures across the region. The model properly represented the Western Irish Sea Gyre, induced by thermal stratification and not known during planning Sellafield. Passive tracer simulations based on the developed hydrodynamic model were used to deliver residence times of the eastern Irish Sea region for various times of the year as well as travel times from the Sellafield outfall site to various locations within the Irish Sea. The results indicate a strong seasonal variability of travel times from Sellafield to the examined locations. Travel time to the Clyde Sea is the shortest for the autumnal tracer release (90 days); it takes almost a year for the tracer to arrive at the same location if it is released in January. Travel times from Sellafield to Dublin Bay fall within the range of 180-360 days. The average residence time of the entire eastern Irish Sea is around 7 months. The areas surrounding the Isle of Man are initially flushed due to a predominant northward flow; a backwater is formed in Liverpool Bay. Thus, elevated tracer concentrations are predicted in Liverpool Bay in the case of accidental spills at the Sellafield outfall site.     

Measurement of marine radionuclide distribution using a towed sea-bed spectrometer

The application of in situ gamma-ray spectrometry to the measurement of radionuclide concentration in sea water and sea-bed sediment is discussed with special reference to a towed sea-bed gamma-ray spectrometer survey of radio-effluent distribution in the Irish Sea. The sensitivity and accuracy of the method are established by comparing the spectrometer measurements with laboratory analyses of sediment samples. Contour maps produced from the spectrometer profiles are matched with the distribution of bottom sediment types and conclusions are drawn concerning the modes of transport and deposition of ¹³⁷Cs in the Irish Sea.     

Post-glacial sediment dynamics in the Irish Sea and sediment wave morphology: Data–model comparisons

The irregular seafloor of the narrow Irish Sea on the NW European Shelf has been documented over several decades. From recently collected swath bathymetry data, very large trochoidal, nearly symmetrical sediment waves are observed in many parts of the Irish Sea and appear similar to those described from other continental shelf seas in North America that were covered by glacigenic sediments during the Last Glacial Maximum. Swath multibeam and single beam bathymetry data, backscatter intensity, shallow seismic imagery, video footage and sediment cores from the Irish Sea high sediment waves have been integrated to identify their genesis with reference to present and past hydrodynamic variability. From cross-sectional profiles over asymmetrical sediment waves in the Irish Sea the direction of asymmetry is used to map residual bed stress directions and associated bedload transport paths. Irish Sea peak bed stress vectors were generated using a two-dimensional palaeo-tidal model for the NW European shelf seas and compare well with the observations. Tidally induced bed stresses are modelled to have increased between 7–10 ka BP, to be nearly symmetrical in magnitude and to have reversed in dominant direction on a millennial scale. These environmental conditions during the post-glacial marine transgression are suggested here to help comprehend the construction of the very large sediment waves, with local variations due to differences in sediment grain size, sediment supply, water depth and intensified currents due to seafloor slopes. Model parameterisation using an open ocean boundary with time-dependent tidal changes and the implementation of high-resolution bathymetric information will improve future models of small-scale bed shear stress patterns and improve the predictive value of such modelling efforts.     

Modern (<100 years) sedimentation in the Taiwan Strait: Rates and source-to-sink pathways elucidated from radionuclides and particle size distribution

A large number of sediment cores collected during 2005-2010 from the Taiwan Strait were analyzed for radionuclides (²¹⁰Pb, ¹³⁷Cs and ⁷Be) to elucidate sedimentation dynamics in this all-important gateway linking two largest marginal seas in the western Pacific (namely, the South China Sea and the East China Sea). Apparent sediment accumulation rates derived from ²¹⁰Pb and ¹³⁷Cs profiles vary from <0.1 to >2 cm/yr, averaging ∼0.4 cm/yr and showing a spatial pattern closely related to hydrodynamics and sediment source-to-sink pathways. Spatial-temporal variation of ⁷Be activity in surface sediments off Taiwan’s west coast indicates episodic deposition of flood layers and their mobility from river estuaries toward the north. In conjunction with particle size distribution in surface sediments and the structure of sediment strata revealed by sub-bottom echo images; the radionuclide data can be used to outline three different sediment source-to-sink dispersal systems. Based on sediment loads of surrounding rivers and the distribution of sediment accumulation rates, lateral transport is required to account for the budget and size distribution of sediments in the strait.     

Hydrocarbon concentrations in water and sediments from UK marine waters,determined by fluorescence spectroscopy

Between January 1978 and September 1979 samples of subsurface (1 m) water and surface sediment were collected from sites in the North Sea, English Channel, Irish Sea and a number of estuarine areas. These have been analysed by fluorescence spectroscopy (UVF) in order to provide information on the levels of hydrocarbons generally present in UK marine waters.Total hydrocarbon concentrations (THCs) of water samples ranged from 1.1–74 μg l.^?1 Ekofisk crude oil equivalents, all values greater than 3.5 μg l.^?1 occurring inshore. In offshore areas the mean THCs were: 1.3 μg l.^?1 in the northern North Sea, 1.5 μg l.^?1 in the western Channel, 2.5 μg l.^?1 in the eastern Channel and southern North Sea, and 2.6 μg l.^?1 in the Irish Sea.THCs of sediment samples ranged from 0.27–340 μ g^?1 dry weight Ekofisk crude oil equivalents, the highest concentration being in the Queen's Channel, the main entrance to the River Mersey.     

Radionuclides and large particles in estuarine sediments

Radionuclides, released into the north-east Irish Sea from the British Nuclear Fuels plc uranium reprocessing plant at Sellafield, Cumbria, UK and which are present in sediments of the Esk estuary, Cumbria, are initially associated with large (i.e. >0.5 mm) rather than fine grained (i.e. <63 μm) particles. I call these macro particles organoliths. They consist of an agglomerate of sediment grains held together with an organic iron rich matrix; their surfaces are coated with a patina of iron and manganese oxides with which the radionuclides are associated. Concentration factors (Kd's) for plutonium, americium, and other radionuclides, together with various stable elements in the patina are orders of magnitude greater than those found in bulk sediments. Some implications concerning the radionuclide content of organoliths are discussed in relation to geochemical process, pollution studies and the requirements of radiological protection.     

Mercury in coastal and estuarine sediments of the northeastern Irish sea

Mercury concentrations in surface intertidal sediments from estuarine and coastal environments of the Northeastern Irish Sea are reported. This region has two inputs of mercury contaminated effluents from chlor-alkali factories, and localized mercury contamination of sediments fairly similar to that reported for the Rhine has been found in the Wyre estuary. The present results for the Mersey estuary agree well with others reported in the lierature. Coastal sediments are much less contaminated than the estuarine deposits, and in all the environments studied strong correlations between mercury concentration, total organic carbon and < 63 μm grainsize fraction contents have been found.     

Modelling temporal trends of 137Cs and 99Tc concentrations in Fucus vesiculosus from the eastern Irish coastline

Time series of ¹³⁷Cs and ⁹⁹Tc activity concentrations in the brown seaweed Fucus vesiculosus and seawater, gathered at three locations on the eastern Irish coastline during the period 1988-2008, have been modelled using a novel approach incorporating a variable uptake rate in the seaweed. Seasonal variations in the time series, identified using spectral analysis, were incorporated into the model which was used to determine transfer kinetic parameters and to predict ¹³⁷Cs and ⁹⁹Tc concentrations in seaweed, as influenced by levels in ambient seawater. An optimisation method combining evolutionary and grid search minimisation techniques was adopted to determine the best values for the model parameters, from which concentration factors (CF) and biological half-lives (tb_1/2) for ¹³⁷Cs and ⁹⁹Tc in F. vesiculosus were calculated. CF values of 170-179 and 1.1 × 105 l kg⁻¹ (dry weight) were obtained for ¹³⁷Cs and ⁹⁹Tc, respectively, while the corresponding tb_1/2 values were 39-47 and 32 days, respectively.     

Sequestration of metals through association with pyrite in subtidal sediments of the Nanpaishui Estuary on the Western Bank of the Bohai Sea, China

Measurements were made of the degree of trace metal pyritization (DTMP) and ancillary characteristics of four undisturbed sediment cores collected from the subtidal zone of the Nanpaishui Estuary on the Western Bank of the Bohai Sea, a seriously polluted inland sea in northeastern China. The remarkably low concentrations of organic carbon (<0.72%) in these sediments likely constrained sulfate reduction rates, and the low concentrations of acid volatile sulfide (AVS) (<12.5 μmol g⁻¹) limited the sequestration of metals through association with pyrite. The most consistent cause of inter-station differences and depth variations in the degree of pyritization was differences in pyrite metal concentrations rather than reactive metal concentrations. Reactive metal concentrations were in several cases negatively correlated with pore water concentrations, consistent with a dissolution/precipitation mechanism. The relationship between pore water metal concentrations and DTMPs was evidenced by a qualitative similarity of the inter-station variability of these same parameters.     

Differential concentration of Technetium-99 (99Tc) in common intertidal molluscs with different food habits

Concentration of ⁹⁹Tc has been measured in fucoids and molluscs, sampled in a sheltered intertidal at the southwest coast of Norway from February to November 2006. The concentrations of ⁹⁹Tc in molluscs differed significantly between species. The filtering bivalve Mytilus edulis had the lowest concentrations with averages of 2.3-5.9 Bq kg⁻¹ d.w., while the herbivorous gastropods Littorinalittorina, Littorina obtusata and Patella vulgata had higher concentrations. P. vulgata and L. obtusata had the highest concentrations, 40-47 and 26-30 Bq kg⁻¹ d.w., respectively. L. obtusata has a specialized habit of living, and prefers to feed on fucoids. P. vulgata can graze extensively on the fucoid Ascophyllum nodosum when available. Fucoids are known to have very high uptake of ⁹⁹Tc, and this was also found in the present study. The high ⁹⁹Tc-concentrations of L. obtusata and P. vulgata are most likely due to their habit of feeding on fucoids.     

Sedimentation and chronology of heavy metal pollution in Oslo harbor, Norway

Stratigraphic profiles of Cu, Cd and Hg in ten sediment cores from the Oslo harbor, Norway, combined with results of radiometric dating demonstrate that pollution by these metals peaked between 1940 and 1970. Dating results indicate that Hg discharges peaked between 1940 and 1950, Cd reached maximum ca. 1955-1960, and Cu has the highest concentration in sediment interval corresponding to ca. 1970. Geochemical profiles and maxima of Cu, Cd and Hg concentrations can be used as chronostratigraphic markers for sediment cores from the Oslo harbor. Acoustic backscatter and sediment core data indicate that propeller wash affects the seabed in the Oslo harbor. The propeller-induced turbulence causes erosion, and in places exposes and remobilizes contaminated sediments that accumulated in the harbor during previous decades. Such re-exposure of contaminated sediments could be detrimental to local ecosystems and offset remediation efforts, warranting further impact studies and potential mitigation strategies to prevent redistribution.     

Isotopic composition and concentration of Pb in suspended particulate matter of the Irish Sea reveals distribution and sources

The isotopic composition and concentration of Pb was measured in suspended particulate matter of the Irish Sea. Aerosol, surficial and pre-industrial sediment was also analysed to provide information on sources terms. Concentrations of Pb in suspended sediments were lower than previously reported which presumably reflects the international effort to reduce Pb inputs to the environment. Lead concentrations were highest in Liverpool Bay and lowest in the western Irish Sea. A significant negative relationship between Pb and salinity suggests that present inputs and the resuspension of relict lead associated with particles in areas significantly affected by freshwater discharges are the predominant sources of Pb to the Irish Sea. The isotopic composition of Pb in the stratified region of the western Irish Sea demonstrates that atmospheric sources are also significant to this region, which is consistent with current knowledge on the hydrography. Pb isotopic ratios show that water entering the Irish Sea through St George's Channel is significantly influenced by anthropogenic inputs prior to additional contamination by direct inputs to the Irish Sea.     

The effect of Hurricane Lili on the distribution of organic matter along the inner Louisiana shelf (Gulf of Mexico,USA)

On October 3, 2002 Hurricane Lili made landfall on a previously studied region of the inner Louisiana shelf as a Category 2 storm with winds over 160 km/h. A week after the hurricane, major impacts of the storm were not evident in the water column except for the lower than expected inshore salinities (∼12 psu) for this time of year, which was characterized by low river discharge. Turbidity profiles were typical of those measured during previous investigations with suspended sediment concentrations >75 mg/L at inshore stations and <50 mg/L in surface waters and offshore. The implication is that the sediments resuspended during the hurricane settled soon after the storm passage. Water column particulate organic carbon (POC) concentrations ranged from 0.1 to over 2.0 mg/L, with the highest concentrations measured near the seabed and in the inshore portions of the study area. Suspended particles were characterized by low organic matter content (%POC of 0.5–2 wt%), low chlorophyll:POC ratios (Chl:POC<4 mg/g) and moderately elevated POC:particulate nitrogen ratios (POC:PN of 10–14 mol/mol), all suggesting their source was locally resuspended seabed sediment rather than from algal biomass or land-derived vascular plant detritus.Post hurricane sediment deposition throughout the study area resulted in a storm layer that ranged from <0.5 to 20 cm in thickness. In most locations sediment accumulation ranged from 3 to 10 cm. The storm deposits were generally composed of silty clays with a coarser, somewhat sandy 1–2 cm basal layer. Surface sediments from the storm layer were characterized by relatively high mineral surface areas (SA of 30–50 m²/g) and elevated OC contents (%OC of 1.0–2.0%). The dispersal of fine sediments following the hurricane resulted in marked changes in the SA and %OC values of surface sediments from offshore locations, which prior to the storm contained coarser, organic-poor particles (SA of 5–15 m²/g and %OC of 0.2–0.6%). The OC:SA and OC:N ratios of storm layer sediments ranged from 0.4 to 0.6 mg OC/m² and from 10 to 12 mol/mol, respectively, and were comparable to those measured in surface sediments prior to the hurricane. Such similarities in the composition of the organic matter reinforce the idea that the source of the storm deposits was the finer fraction of resuspended seabed sediments, with little evidence for inputs from local land-derived sources or autochthonous algal production. Overall, the magnitude of sediment and organic matter deposition on the seabed after the storm greatly exceeded the annual inputs from the Atchafalaya River and coastal primary production. The combined effects of hurricane-driven erosion and post-storm deposition represent a major perturbation to the benthic community of the region, which is already subject to these types of disturbances due to the combined effects of peaks in river discharge and the passage of storm fronts.     

Matrix bound phosphine in sediments of the yellow sea and its coastal areas

Matrix bound phosphine (MBP), a kind of chemically reduced phosphorus, has received limited attention in prevailing modeling of the phosphorus biogeochemical cycle. MBP has been found to occur in marine sediments. MBP in the sediments of the Yellow Sea and its coastal areas was measured by gas chromatography from 2004 to 2007. MBP levels in surface sediments were 0.19–38.24 ng kg⁻¹ in the shelf of the Yellow Sea, 0.34–17.15 ng kg⁻¹ in the Jiaozhou Bay, 2.11–71.79 ng kg⁻¹ in the Sanggou Bay and 0.28–319.32 ng kg⁻¹ in the rivers around the Jiaozhou Bay. High levels of MBP occurred in the northern and middle areas of the Yellow Sea. Obvious seasonal variation of MBP was observed in surface sediments of the Sanggou Bay, with the highest MBP level occurring in summer and the lowest in winter. MBP in surface sediments of the inner Jiaozhou Bay was higher than those in the outer region. MBP levels increased with depth in the top 5–10 cm sediments of the Jiaozhou Bay and on the intertidal flats. Environmental factors such as type of sediments, temperature, organic matter and human activity were found to affect the concentrations and distribution of MBP in marine sediments.     

Interactions between groundwater seepage and sediment porewater sulphate concentration profiles in lake anna,Virginia

Most sulphur diagenesis models predict that SO₄^2- concentrations decrease exponentially with increasing sediment depth and are lower than that of the overlying water throughout the sediments. Low SO₄^2- concentrations (less than 0.2 mM) are common in the sediments of Lake Anna that receive acid mine drainage; however, sediment with as much as 20 mM SO₄^2- at about 20cm below the sediment surface is also seen in this section of the lake. A decision tree was proposed to investigate the cause of the high SO₄^2- concentrations at depth (HSD) in the sediment. The first possibility proposed was that an increase in the quantity of groundwater flowing through Lake Anna sediments may increase groundwater advection of SO₄^2- or oxygen which would induce sulphide oxidation. This hypothesis was tested by measuring groundwater flow. HSD profiles were found in a discrete region of the lake; however, stations having these profiles did not have higher groundwater flow than other sites sampled. Alternate explanations for the HSD profiles were that the region in which they occurred had: (1) unusual sediment chemical compositions; (2) a different source of regional groundwater, or (3) a lateral intrusion of high SO₄^2- groundwater. There were no differences in sulphide and organic matter concentrations between the two regions. The area which has HSD in the sediment covers a large area in the middle of the lake, so it is unlikely that it has a unique source of regional groundwater. The third alternative was supported by the fact that in all three sample years, HSD stations were located in the preimpoundment stream channel, which is a likely lateral flow path for groundwater containing high SO₄^2- concentrations.     

Spatial distribution of phosphorus forms in sediments in the Gulf of Gdańsk (southern Baltic Sea)

The paper analyses the concentrations of total phosphorus and its forms in sediments from the Gulf of Gdańsk on the basis of studies conducted at 25 sampling sites in 2001–05. The phosphorus speciation analysis was performed by sequential extraction. The extensive spatial variability of P_tot concentrations and speciation was found to be dependent on the physicochemical properties of the sediments, the oxygen conditions in the water and sediments, and the depth of the water column above the sediment surface. In the coastal zone, the sedimentation of riverine suspended matter and the sorption and chemisorption processes exert a considerable influence on P speciation. Over 70% of variation of total phosphorus concentration in sediments in the Gulf of Gdańsk could be explained by changes of proportion of fine fraction of sediments (grain size <0.0625 mm). Maximum P_tot concentrations were recorded in clays and silts in the deep water, stratified part of the Gulf of Gdańsk. In the coastal zone, where sandy sediments are dominant, phosphorus concentrations were much lower; this was due to the considerable dynamics of the bottom water and intensive sea floor transport. P_tot concentrations in the Gulf of Gdańsk sediments ranged from 1.75 to 957.17 μmol g⁻¹ d.w. Of all the forms of phosphorus, the highest concentrations were found for organic phosphorus (Org-P). Of its inorganic forms, the highest concentrations were of phosphorus bound to clay minerals and aluminium oxides (NaOH-P), the lowest ones were of loosely bound phosphorus (NaCl-P). On the basis of determinations of total phosphorus concentrations in sediments of a given type and the available data on the seabed areas covered by particular sediment types in the Gulf of Gdańsk, the mass of total phosphorus in the surficial sediment layer (0–2 cm) was estimated at ca. 15.6×10³ tonnes.     

Sediment and trace element depositional history from the Ajkwa River estuarine mangroves of Irian Jaya (West Papua), Indonesia

Radiotracer ²¹⁰Pb and contaminant copper were used to estimate sediment accumulation rates in 4 cores from the Ajkwa River estuary and mangrove tidal channels in western Irian Jaya. Mass accumulation rates (4.5–13 kg dry wt m⁻² yr⁻¹) were within the envelope of expectations for a region of high rainfall, great river catchment relief, and rapid tectonic uplift of mountains. Copper accumulation rates were enhanced 40 fold in surface sediments, compared to pre-1950 sections of the sediment cores. These recent sediments with enhanced copper concentrations come from Freeport Indonesia mine tailings over the last 27 years. Variations in sediment core profiles of Al, Fe, and organic carbon were small, indicating no great change in bulk sediment composition. Sulfur concentrations decline toward the sediment surface, suggesting a decline in rates of microbial sulfate reduction. Enhanced sediment copper concentrations will be a useful tracer of sediment dispersal from the Ajkwa River estuary along this coast.     

Influence of hydro-sedimentary factors on mollusc death assemblages in a temperate mixed tide-and-wave dominated coastal environment: Implications for the fossil record

Mollusc death assemblages were recovered in 98 subtidal sampling stations on the seafloor of the shallow Pertuis Charentais Sea (Atlantic coast of France). Taxonomic composition and spatial distribution of death assemblages were investigated, as well as their response to sediment grain size (field data), bottom shear stress (coupled tide and wave hydrodynamic modelling), and sediment budget (bathymetric difference map). Results showed that molluscs are likely to be reliable paleoenvironmental indicators since death assemblages were able to acquire ecological changes within years (decadal-scale taphonomic inertia), and live–dead agreement inferred from existing data on living benthic communities was high, except close to river mouths and intertidal mudflats that provide terrestrial and intertidal species to subtidal death assemblages, respectively. Taxonomic composition of these within-habitat death assemblages strongly depended on sediment grain size and bottom shear stress, similarly to living subtidal communities. Post-mortem dispersal of shells, owing to relatively low bottom shear stress in the area, was only of a few 10s to 100s of meters, which shows that death assemblages preserved environmental gradients even at a fine spatial scale. Sediment budget had also a significant influence on death assemblages. Thick-shelled epifaunal species were correlated with erosion areas on one side, and thin-shelled infaunal species with deposition on the other, showing that mollusc fossil assemblages could be used as indicators of paleo-sedimentation rate. This new proxy was successfully tested on a previously published Holocene mollusc fossil record from the same area. It was possible to refine the paleoenvironmental interpretation already proposed, in accordance with existing stratigraphic and sedimentological data.