Petrology of metapelites in the Bugaboo aureole,British Columbia,Canada

Contact metamorphism of greenschist facies Neoproterozoic turbidites by the Cretaceous Bugaboo Batholith in southeastern British Columbia has resulted in a well‐developed contact aureole. The aureole is about 1 km wide and can be divided into three main zones: (i) spotted phyllite zone, extending from the first appearance of spots of cordierite or andalusite to the last occurrence of primary chlorite; (ii) cordierite + andalusite + biotite zone, comprising hornfelses or schists with abundant porphyroblasts of cordierite and andalusite and, at higher grades, fibrolitic sillimanite; and (iii) K‐feldspar zone, characterized by hornfelses and schists that, in the inner part of this zone, are variably migmatitic. Four parts of the aureole were examined, three of which are characterized by schists, and one of which (Cobalt Lake area) is characterized by hornfelses and has exceptional exposure and comparatively unaltered rocks. Petrographic, modal, mineral‐compositional and whole rock‐compositional data were collected from the Cobalt Lake transect, allowing the prograde reaction sequence to be inferred. Notable features of the aureole at Cobalt Lake include: initial development of andalusite and plagioclase at the expense of paragonite‐rich white mica; a narrow interval across which cordierite, andalusite and biotite increase markedly at the expense of chlorite; gradual development of andalusite and biotite at the expense of cordierite and muscovite upgrade of chlorite consumption; and near‐simultaneous development of andalusite + K‐feldspar and sillimanite, the latter indicating a pressure of contact metamorphism of ~3 kbar. In other parts of the aureole, the development of sillimanite downgrade of the initial development of K‐feldspar suggests slightly higher pressures of contact metamorphism. Lack of correspondence between the observed sequence of reactions in the aureole and those predicted thermodynamically suggests that modifications to some of the thermodynamic data or activity–composition models may be required. Textural features in the aureole suggest the influence of kinetic factors on metamorphic recrystallization, including: (i) deformation‐catalysed reaction in the schists compared to the hornfelses, as indicated by different mineral‐growth sequences inferred from microstructures, and (ii) heating rate‐controlled recrystallization, as indicated by the decrease in grain size of hornfelses with increasing metamorphic grade.     

Metamorphism at a late Mesozoic accretionary margin: a study from the Coast Belt of the North American Cordillera

The late Mesozoic and Cenozoic metamorphic evolution of the western North American continental margin is recorded in a belt of homogeneous metapelitic rocks, the Kluane metamorphic assemblage (KMA), in the northern Coast Belt of Yukon Territory. A record of Late Cretaceous medium‐pressure and ‐temperature (c. 7 kbar, 500 °C) metamorphism, M1, is preserved in Ca‐rich garnet and Na‐rich plagioclase cores in rocks that were little affected by later events. M1 was synchronous with mylonitization and is attributed to accretion of the KMA to the ancient continental margin. Isothermal decompression during rapid uplift was followed by early Eocene emplacement of the Ruby Range Batholith (RRB), part of a magmatic arc produced by subduction of the Kula plate. The intrusion of the RRB led to a contact metamorphic overprint, M2, producing a 5–6 km wide aureole in which the grade ranges from subgarnet zone to garnet–cordierite–K‐feldspar zone. Pressure and temperature estimates for M2, calculated from mineral equilibria, are 3.5–4.5 kbar and 530–720 °C, generally consistent with the stability limits of the observed mineral assemblages. Comparison of mineral assemblages and P–T conditions in the KMA with those in the Mclaren Glacier metamorphic belt in Alaska does not support the correlation of the two metamorphic sequences. This weakens the hypothesis proposing 400 km of dextral slip along the Denali fault zone.     

The zoned Bruinbun granitoid pluton and its aureole

The Bruinbun pluton is a small, massive, I‐type granitoid intruded into the meta‐sedimentary Hill End Trough, in eastern N.S.W. It is a multiple pluton representing two discrete magma pulses, the granodiorite core intruding the adamellite margin. A weak alignment of orthoclase megacrysts in the granitoids is best developed adjacent to both the internal and external intrusive contacts, and is considered by the writer to be a product of magmatic flow. Part of the northern contact and the southern and western contacts dip inward at moderate angles, whereas the eastern contact is vertical to outward‐dipping. The pluton is inferred to be mushroom‐shaped, and slightly tilted.

The intensity of aureole deformation is low. The aureole has been flexed into concordancy with the pluton roof, and a rudimentary rim fold‐zone is present around lower levels of the pluton. Intrusion of the granitoid is inferred to be primarily by uplift of its roof and depression of its floor.

The highest‐grade contact metamorphic parageneses developed are: cordierite‐K feldspar‐biotite‐quartzite ± andesine ± epidote in metapelites, and ferrohornblende‐biotite‐muscovite‐andesine‐epidote‐quartz in metavolcarenites. No intrusion‐related foliation or lineation was formed.     

Polymetamorphic history of a relict Permian hornfels from the central Gran Paradiso Massif (Western Alps,Italy): a microstructural and thermodynamic modelling study

A petrological and thermobarometric study of the Lago Teleccio hornfelses was undertaken to reconstruct the polymetamorphic evolution and constrain the P–T conditions of Permian contact metamorphism. The Lago Teleccio metasedimentary rocks record a Variscan regional metamorphism characterized by amphibolite facies mineral assemblages including quartz, plagioclase, K‐feldspar (Kfs 1), biotite, garnet (Grt 1) and staurolite; this was followed by a late‐Variscan mylonitization event. Metamorphism of the Variscan metamorphic rocks at the contact with a Permian granitic intrusion produced static recrystallization and/or new growth of quartz, garnet (Grt 2), plagioclase, K‐feldspar (Kfs 2), cordierite, green spinel, biotite and prismatic sillimanite (Contact 1). This thermal event, which occurred at a peak pressure of 0.23–0.35 GPa, temperature of 670–700 °C and a_H2O of 0.75–1, was followed either during post‐contact metamorphism cooling or, more likely, during the early‐Alpine metamorphism by the breakdown of cordierite into an anhydrous kyanite + orthopyroxene + quartz assemblage. The poorly developed early‐Alpine eclogite facies metamorphism (Alpine 1) was characterized by relatively anhydrous mineral associations and low strain, which locally produced coronitic and pseudomorphous microstructures in metasedimentary rocks, with scanty formation of jadeite, zoisite and a new high‐pressure garnet (Grt 3). Greenschist facies retrogression (Alpine 2) was characterized by the local development of a chlorite‐ and muscovite‐bearing mineral association, suggestive of aqueous fluid incursion. In the hornfelses, the limited extent of metamorphic overprinting is suggested by the fine grain size of the Alpine mineral associations, which formed at the expense of the Permian contact metamorphic associations, and was favoured by the anhydrous mineralogy of the hornfelses.     

Metamorphic Environments around the Cretaceous Kurihashi Pluton in the Kitakami Mountains, NE Japan: in Comparison to the Ganidake Pluton - Kamaishi Skarn Metasomatism

Abstract. Many granitic plutons of Early Cretaceous age are intruded on various scales in the Kitakami Mountains. The stock‐type Ganidake pluton accompanies enormous Fe‐Cu mineralization of the Kamaishi deposits, whereas the Kurihashi pluton accompanies less mineralization. To elucidate the cause of these differences, the metamorphic conditions and redox state of the contact metamorphic aureole around the Kurihashi pluton have been examined by the petrochemical study and gas analysis of the metamorphic rocks. A typical mineral assemblage in the pelitic rocks in the lowest‐grade part is biotite‐muscovite‐chlorite‐quartz‐plagio‐clase‐graphite, which occur more than 2 km away from the contact point with the Kurihashi pluton. Graphite disappears at the 1550 m point, and cordierite and garnet appear in the middle and highest‐grade parts, respectively. A typical mineral assemblage in the tuffaceous rocks in the lower‐grade part is chlorite‐actinolite‐biotite‐quartz‐plagioclase. Actinolite changes into hornblende near to the pluton. The CO₂/CH₄ ratios obtained in measurements by gas chromatography exceeds 100 in the pelitic rocks at the contact point with the pluton. The ratios decrease and become less than 0.1 with distance from the pluton. Equilibrium temperatures calculated from a garnet‐biotite pair in the pelitic rock and a hornblende‐plagioclase pair in the tuffaceous rock are 640d? and 681 d?C at the contact point, respectively. The log?o₂ values among these metamorphic aureoles estimated from the CO₂/CH₄ ratios are slightly lower than the FMQ‐buffer. Redox states of the contact metamorphic aureole are kept in an intermediate condition between oxidized magma of the Kurihashi pluton and graphite‐bearing pelitic country rocks. Judging from these metamorphic conditions around the Kurihashi pluton and from the re‐evaluation of the previous knowledge about contact metasomatism around the Ganidake pluton, the Kurihashi metamorphism has occurred at higher temperatures and dry conditions than the Ganidake metasomatism. These differences in the metamorphic conditions and presence or absence of a large limestone mass around the pluton might be the principal reasons why the Kurihashi pluton accompanies less mineralization and the Ganidake pluton accompanies gigantic Kamaishi skarn mineralization.     

On the Structure and Metamorphism of the Roc de Frausa Massif (Eastern Pyrenees)

Abstract

The Roc de Frausa Massif, located at the Eastern Pyrenees, is formed by a stratoid Pre-Hercynian deformed granite (orthogneiss) interbedded with metasedimentary series. Hercynian granitoids (St. Llorenç — La Jonquera pluton) surround the southern and eastern part of the massif and Hercynian basic igneous rocks (Ceret stock) occupy the central part of it. The Pre-Hercynian granite and the sedimentary series were involved, during the Hercynian orogeny, in complex polyphasic tectonics and metamorphism. As a result, an ubiquitous penetrative foliation was developed during the earlier stages. This foliation was subsequently folded into a complex antiformal structural formed by a double dome : Roc de Frausa dome and Mas Blanc dome. Main lithological boundaries (gneiss — metasediments and metasediments — granitoids) are broadly parallel to the regional foliation, and they all display the dome geometry. Interference fold pattern between two late phases, an ealier one with NE-SW trending folds and a younger one with NW-SE trending folds is responsible for the dome geometry. Mylonitic deformation, with W-E to NW-SE orientations has been attributed to the last folding phase. Regional metamorphic climax and contact metamorphism, the last one resulting from Hercynian granitoid emplacement, preceeded the above mentioned late folding event, which developed under retrograde metamorphic conditions. Regional peak metamorphism is recognized by the static crystallization of cordierite + potassium feldspar. This paragenesis indicates pressure — temperature conditions of about 3.1 Kbar and 660 °C maximum. Contact metamorphism overprints the earlier regional metamorphism. Parageneses and thermal gradient of contact metamorphism around La Jonquera pluton are very similar to those related to regional metamorphism, whereas parageneses produced around Ceret stock present garnet + potassium feldspar. Geothermometry indicates metamorphic conditions locally higher for this paragenesis (around 700 °C).     

Porphyroblast rotation during crenulation cleavage development: an example from the aureole of the Mooselookmeguntic pluton, Maine, USA

In the low‐pressure, high‐temperature metamorphic rocks of western Maine, USA, staurolite porphyroblasts grew at c. 400 Ma, very late during the regional orogenesis. These porphyroblasts, which preserve straight inclusion trails with small thin‐section‐scale variation in pitch, were subsequently involved in the strain and metamorphic aureole of the c. 370 Ma Mooselookmeguntic pluton. The aureole shows a progressive fabric intensity gradient from effectively zero emplacement‐related deformation at the outer edge of the aureole ～2900 m (map distance) from the pluton margin to the development of a pervasive emplacement‐related foliation adjacent to the pluton. The development of this pervasive foliation spanned all stages of crenulation cleavage development, which are preserved at different distances from the pluton. The spread of inclusion‐trail pitches in the staurolite porphyroblasts, as measured in two‐dimensional (2‐D) thin sections, increases nonlinearly from ～16° to 75° with increasing strain in the aureole. These data provide clear evidence for rotation of the staurolite porphyroblasts relative to one another and to the developing crenulation cleavage. The data spread is qualitatively modelled for both pure and simple shear, and both solutions match the data reasonably well. The spread of inclusion‐trail orientations (40–75°) in the moderately to highly strained rocks is similar to the spread reported in several previous studies. We consider it likely that the sample‐scale spread in these previous studies is also the result of porphyroblast rotation relative to one another. However, the average inclusion‐trail orientation for a single sample may, in at least some instances, reflect the original orientation of the overgrown foliation.     

Silica depleted melting of pelites. Petrogenetic grid and application to the Susqueda Aureole, Spain

Metapelitic rocks in the low pressure contact metamorphic aureole around the Susqueda igneous complex, Spain show a number of features that make them an ideal testing ground for the modelling of silica‐undersaturated melting. Rocks in the aureole experienced localized depletion in silica by the segregation of quartz veins during a pre‐anatectic, regional cordierite‐andalusite grade metamorphic event. These rocks were then intruded by gabbroic to dioritic rocks of the Susqueda igneous complex that formed a migmatitic contact metamorphic aureole in the country rocks. This migmatisation event caused quartz‐saturated hornfels and restite formation in rocks that had experienced no quartz vein segregation in the previous regional metamorphic event, but silica‐undersaturated melting in those rocks that were previously depleted in silica. Silica‐undersaturated melting is investigated using a new petrogenetic P–T projection and equilibrium pseudosections calculated in the KFMASH and NCKFMASH systems, respectively. The grid considers quartz absent equilibria and a range of phases that form typically in silica‐undersaturated bulk compositions, for example corundum. It is shown that the quartz‐rich precursors in the Susqueda contact aureole produced about 10% melt during contact metamorphism. However, most of this melt was extracted leaving behind rocks with restitic bulk compositions and minor leucosome segregation. It is suggested that the melt mixed with the host igneous rocks causing an apparent magmatic zoning from diorite in the centre of the complex to tonalite at the margins. In contrast, the quartz‐poor precursors (from which the quartz veins segregated) melted in the silica‐undersaturated field producing a range of assemblages including peritectic corundum and spinel. Melting of the silica‐undersaturated rocks produced only negligible melt and no subsequent melt loss.     

Late‐stage orogenic loading revealed by contact metamorphism in the northern Appalachians,New York

Pelitic schists from contact aureoles surrounding mafic–ultramafic plutons in Westchester County, NY record a high‐P (~0.8 GPa) high‐T (~790 °C) contact overprint on a Taconic regional metamorphic assemblage (~0.5 GPa). The contact metamorphic assemblage of a pelitic sample in the innermost aureole of the Croton Falls pluton, a small (<10 km²) gabbroic body, consists of quartz–plagioclase–biotite–garnet–sillimanite–ilmenite–graphite–Zn‐rich Al‐spinel. Both K‐feldspar and muscovite are absent, and abundant biotite, plagioclase, sillimanite, quartz and ilmenite inclusions are found within subhedral garnet crystals. Unusually low bulk‐rock Na and K contents imply depletion of alkalic components and silica through anatexis and melt extraction during contact heating relative to typical metapelites outside the aureole. Thermobarometry on nearby samples lacking a contact overprint yields 620–640 °C and 0.5–0.6 GPa. In the aureole sample, WDS X‐ray chemical maps show distinct Ca‐enriched rims on both garnet and matrix plagioclase. Furthermore, biotite inclusions within garnet have significantly higher Mg concentration than matrix biotite. Thermobarometry using GASP and garnet–biotite Mg–Fe exchange equilibria on inclusions and adjacent garnet host interior to the high‐Ca rim zone yield ~0.5 ± 0.1 GPa and ~620 ± 50 °C. Pairs in the modified garnet rim zone yield ~0.9 ± 0.1 GPa and ~790 ± 50 °C. Thermocalc average P–T calculations yield similar results for core (~0.5 ± ~0.1 GPa, ~640 ± ~80 °C) and rim (~0.9 ± ~0.1 GPa, ~800 ± ~90 °C) equilibria. The core assemblages are interpreted to record the P–T conditions of peak metamorphism during the Taconic regional event whereas the rim compositions and matrix assemblages are interpreted to record the P–T conditions during the contact event. The high pressures deduced for this later event are interpreted to reflect loading due to the emplacement of Taconic allochthons in the northern Appalachians during the waning stages of regional metamorphism (after c. 465 Ma) and before contact metamorphism (c. 435 Ma). In the absence of contact metamorphism‐induced recrystallization, it is likely that this regional‐scale loading would remain cryptic or unrecorded.     

Multi-stage pseudomorphic replacement of garnet during polymetamorphism: 1. Microstructures and their interpretation

Metapelites from the southern aureole of the Vedrette di Ries tonalite (eastern Alps) were variably overprinted by contact and earlier regional metamorphic events during pre-Alpine and Alpine metamorphic cycles. In these rocks, starting from a primary garnet mica-schist (garnet stage), a complex sequence of transformations, affecting the site of the garnet, has been recognized. In the outermost part of the aureole, the primary garnet sites are occupied by nodules of kyanite (kyanite stage). Closer to the tonalite, kyanite is replaced by staurolite (staurolite stage), which in turn is pseudomorphed by muscovite (muscovite stage). The aggregates of kyanite do not overgrow garnet directly; they post-date a stage (fibrolite stage) represented by the pseudomorphic alteration of garnet into fibrolitic sillimanite plus biotite. A further sericite stage is likely to have occurred between the fibrolite and kyanite stages. Preservation of the sub-spherical garnet shape during all these transformations and persistence of mineralogical and textural relicts from earlier stages were favoured by the very low strain experienced by the rocks since the garnet stage. The textural sequence is in agreement with the metamorphic history of this part of the Austroalpine basement of the Eastern Alps: the garnet and fibrolite stages, and the coeval main foliation of the samples, are referred to the high-grade Hercynian metamorphism; the kyanite stage to the Eo-Alpine metamorphism; the staurolite and muscovite stages to the Oligocene contact metamorphism. It is suggested that kyanite growth as microgranular aggregates took place in polymetamorphic rocks where static, high- P /low- T  metamorphism overprinted high- T  assemblages that contained sillimanite or andalusite.     

Stable isotope constraints on the Al2SiO5'triple-point' rocks from the Proterozoic Priest pluton contact aureole, New Mexico, USA

The Priest pluton contact aureole in the Manzano Mountains, central New Mexico preserves evidence for upper amphibolite contact metamorphism and localized retrograde hydrothermal alteration associated with intrusion of the 1.42 Ga Priest pluton. Quartz–garnet and quartz–sillimanite oxygen isotope fractionations in pelitic schist document an increase in the temperatures of metamorphism from 540 °C, at a distance of 1 km from the pluton, to 690 °C at the contact with the pluton. Comparison of calculated temperature estimates with one‐dimensional thermal modelling suggests that background temperatures between 300 and 350 °C existed at the time of intrusion of the Priest pluton. Fibrolite is found within 300 m of the Priest pluton in pelitic and aluminous schist metamorphosed at temperatures >580 °C. Coexisting fibrolite and garnet in pelitic schist are in oxygen isotope equilibrium, suggesting these minerals were stable reaction products during peak metamorphism. The fibrolite‐in isograd is coincident with the staurolite‐out isograd in pelitic schist, and K‐feldspar is not observed with the first occurrence of fibrolite. This suggests that the breakdown of staurolite and not the second sillimanite reaction controls fibrolite growth in staurolite‐bearing pelitic schist. Muscovite‐rich aluminous schist locally preserves the Al₂SiO₅ polymorph triple‐point assemblage – kyanite, andalusite and fibrolite. Andalusite and fibrolite, but not kyanite, are in isotopic equilibrium in the aluminous schist. Co‐nucleation of fibrolite and andalusite at 580 °C in the presence of muscovite and absence of K‐feldspar suggests that univariant growth of andalusite and fibrolite occurred. Kyanite growth occurred during an earlier regional metamorphic event at a temperature nearly 80 °C lower than andalusite and fibrolite growth. Quartz–muscovite fractionations in hydrothermally altered pelitic schist and quartzite are small or negative, suggesting that late isotopic exchange between externally derived fluids and muscovite, but not quartz, occurred after peak contact metamorphism and that hydrothermal alteration in pelitic schist and quartzite occurred below the closure temperature of oxygen self diffusion in quartz (<500 °C).     

Metamorphic evolution of the southern part of the Hidaka belt, Hokkaido, Japan

Abstract The Hidaka metamorphic terrane in the Meguro-Shoya area, Hokkaido, Japan is divided into four progressive metamorphic zones: A—biotite zone; B—cordierite zone; C—cordierite–K-feldspar zone; and, D—sillimanite–K-feldspar zone of the andalusite–sillimanite facies series type of metamorphism. The metamorphic grade ranges from the higher temperature part of the greenschist facies (zone A) through the amphibolite facies (zones B and C) to the lower temperature part of the granulite facies (zone D). The zone boundaries intersect the bedding planes at high angles. P–T conditions estimated are 450–550°C and 2 kbar for zone A, 550–600°C and 2–2.5 kbar for zone B, 600–650°C and 2.5–3 kbar for zone C and 650–750°C and 3–4 kbar for zone D. The metapelites of zone D were partially melted.
At the later stage of the regional metamorphism which is early Oligocene to early Miocene in age, cordierite tonalite and biotite tonalite intrusives associated with segments of the highest grade rocks (zone D) were emplaced into the lower temperature part of the regional metamorphic rocks, giving rise to a contact metamorphic aureole. The thermally metamorphosed terrain (zone C') belongs to the amphibolite facies and its P–T conditions are estimated to have been 550–700°C and 2 kbar.
The P–T–t paths of the Hidaka metamorphism show a thickening–heating–uplifting process. The metamorphism is inferred to have taken place beneath an active island arc accompanied by partial melting of the crust.     

Granulite facies thermal aureoles and metastable amphibolite facies assemblages adjacent to the Western Fiordland Orthogneiss in southwest Fiordland, New Zealand

In southwest New Zealand, a suite of felsic diorite intrusions known as the Western Fiordland Orthogneiss (WFO) were emplaced into the mid to deep crust and partially recrystallized to high‐P (12 kbar) granulite facies assemblages. This study focuses on the southern most pluton within the WFO suite (Malaspina Pluton) between Doubtful and Dusky sounds. New mapping shows intrusive contacts between the Malaspina Pluton and adjacent Palaeozoic metasedimentary country rocks with a thermal aureole ～200–1000 m wide adjacent to the Malaspina Pluton in the surrounding rocks. Thermobarometry on assemblages in the aureole indicates that the Malaspina Pluton intruded the adjacent amphibolite facies rocks while they were at depths of 10–14 kbar. Similar P–T conditions are recorded in high‐P granulite facies assemblages developed locally throughout the Malaspina Pluton. Palaeozoic rocks more than ～200–1000 m from the Malaspina Pluton retain medium‐P mid‐amphibolite facies assemblages, despite having been subjected to pressures of 10–14 kbar for > 5 Myr. These observations contradict previous interpretations of the WFO Malaspina Pluton as the lower plate of a metamorphic core complex, everywhere separated from the metasedimentary rocks by a regional‐scale extensional shear zone (Doubtful Sound Shear Zone). Slow reaction kinetics, lack of available H₂O, lack of widespread penetrative deformation, and cooling of the Malaspina Pluton thermal anomaly within c. 3–4 Myr likely prevented recrystallization of mid amphibolite facies assemblages outside the thermal aureole. If not for the evidence within the thermal aureole, there would be little to suggest that gneissic rocks which underlie several 100 km² of southwest New Zealand had experienced metamorphic pressures of 10–14 kbar. Similar high‐P metamorphic events may therefore be more common than presently recognized.     

Contrasting degrees of recrystallization of carbonaceous material in the Nelson aureole,British Columbia and Ballachulish aureole,Scotland, with implications for thermometry based on Raman spectroscopy of carbonaceous material

The degree of recrystallization of carbonaceous material (CM), as monitored by Raman microspectroscopy, was examined as a function of metamorphic grade in two well‐studied contact aureoles containing carbonaceous pelites: the Nelson aureole, British Columbia and the Ballachulish aureole, Scotland. Here, we use (a) the R2 ratio extracted from the Raman spectrum of CM as a proxy for the degree of graphitization (0.0 in perfect graphite then increasing with structural defects) and (b) the second‐order S1 band (~2,700 cm^?1) as a marker for the tridimensional ordering of CM. The Nelson aureole (garnet–staurolite–andalusite–sillimanite–K‐feldspar sequence, ~550–650°C, 3.5–4.0 kbar) was developed in rocks that were unmetamorphosed prior to contact metamorphism, whereas the Ballachulish aureole (cordierite–andalusite–K‐feldspar–sillimanite sequence, ~550–700°C, ~3.0 kbar) was developed in rocks that had been metamorphosed to garnet grade conditions (~7 kbar, ~500°C) c. 45 Ma before contact metamorphism. Thirty‐one samples were examined from Nelson and 29 samples from Ballachulish. At Nelson, the R2 ratio steadily decreases from ~0.25 to 0.0 as the igneous contact is approached, whereas at Ballachulish, the R2 ratio remains largely unchanged from regional values (~0.20–0.25) until less than 100 m from the igneous contact. The second‐order S1 band reveals that carbonaceous material (CM) was transformed to highly “ordered” locally tridimensional graphitic carbon at Ballachulish by regional metamorphism prior to contact metamorphism, whereas CM was still a disordered turbostratic (bidimensional) material before contact metamorphism in the case of Nelson. Pretexturation of CM likely induced sluggish recrystallization of CM and delayed graphitization in the Ballachulish aureole. Temperatures of recrystallization of the CM in the two aureoles were estimated using different published calibrations of the thermometry based on Raman Spectroscopy of Carbonaceous Material (RSCM), with differences among the calibrations being minor. In the Nelson aureole, temperatures are in reasonable agreement with those indicated by the metapelitic phase equilibria (all within 50°C, most within 25°C). In the Ballachulish aureole, the retarded crystallization noted above results in increasing underestimates of temperatures compared to the metapelitic phase equilibria (up to ~75°C too low within 200 m of the igneous contact). Our study calls for careful attention when using RSCM thermometry in complexly polymetamorphosed rocks to assess properly the meaning of the calculated temperature.     

Phase relations in andalusite-sillimanite type Fe-rich metapelites: Tono contact metamorphic aureole, northeast Japan

Mineral assemblages in metapelites of the contact aureole of the Tono granodiorite mass, northeast Japan, change systematically during progressive metamorphism along an isobaric path at 2-3 kbar. The bulk rock compositions of metapelites are aluminous with A' values on an AFM projection larger than that of the chlorite join. The metapelites commonly contain paragonite in the low-grade zone. With increasing temperatures, andalusite is formed by the breakdown of paragonite. The importance of pyrophyllite as a source of Al₂SiO₅ polymorphs is limited in typical pelitic rocks.
The most common type of metapelite in the study area has FeO/(FeO + MgO) = 0.5–0.6, and develops assemblages involving chlorite, andalusite, biotite, cordierite, K-feldspar, sillimanite and almandine, with paragenetic changes similar to other andalusite-sillimanite type aureoles. Rocks with FeO/(FeO + MgO) > 0.8 progressively develop chloritoid-bearing assemblages from Bt-Chl-Cld, And-Bt-Cld, to And-Bt at temperatures between the breakdown of paragonite and the appearance of cordierite in the more common pelitic rocks in the aureole. The paragenetic relations are explained by a KFMASH univariant reaction of Chl + Cld = And + Bt located to the low-temperature side of the formation of cordierite by the terminal equilibrium of chlorite. A P-T model depicting the relative stability of chloritoid and staurolite at low- and medium-pressure conditions, respectively, is proposed, based on the derived location of the Chl + Cld = And + Bt reaction combined with the theoretical phase relations among biotite, chlorite, chloritoid, garnet and staurolite.     

U-Pb sphene dating of metamorphism: the importance of sphene growth in the contact aureole of the Red Mountain pluton,Laramie Mountains,Wyoming

 The relative importance of thermal diffusion versus new growth or recrystallization on U-Pb isotopic data from sphene is assessed through a study of amphibolites and granite gneisses within the contact aureole of the Red Mountain pluton, Laramie anorthosite complex, Wyoming. Samples were collected along a traverse approximately perpendicular to the margin of the intrusion over a distance of 0.13 to 2.65 km from the contact. The ²⁰⁷Pb/²⁰⁶Pb ages of sphene from amphibolite samples range between 1.43 Ga, the intrusive age of the Red Mountain pluton, to 1.78 Ga, the age of regional metamorphism. The ²⁰⁷Pb/²⁰⁶Pb ages of sphene in rocks metamorphosed above 700° C are within error of the intrusive age of the pluton, and appear to have resulted from diffusional resetting of preexisting sphene and the metamorphic growth of additional sphene at 1.43 Ga. At greater distance from the contact the ²⁰⁷Pb/²⁰⁶Pb ages range from 1.45 to 1.72 Ga. This 300 million year spread in ages is interpreted to result from two periods of sphene growth, one produced during regional metamorphism at 1.78 Ga and another generation of newly grown or recrystallized sphene that formed during contact metamorphism at 1.43 Ga. These two age populations may be identified on the basis of petrographic textures, the morphologies and color differences of grain separates as well as by the U-Pb systematics. In rocks metamorphosed to temperatures less than 700° C, sphene growth was the dominant process controlling the response of the U-Pb isotope system to contact metamorphism. Sphene grew well outside the zone of obvious contact metamorphism. The U-Pb sphene ages were reset by diffusion only at high temperatures, supporting the experimentally determined closure temperature estimates for the U-Pb system in sphene of around 650° C (Cherniak 1993). This study demonstrates that U-Pb ages of sphene can be used to date metamorphism not only in areas with a simple geologic history, such as igneous intrusion or single metamorphic or deformational events, but also to date multiple events so long as different generations of sphene can be identified and separated. Received: 22 August 1995 / Accepted: 17 April 1996     

Conditions of contact metamorphism, Papoose Flat Pluton, eastern California, USA: implications for cooling and strain histories

Abstract Petrological study of highly strained carbonate and pelitic rocks within the contact aureole surrounding the western part of the Papoose Flat pluton yields thermal profiles (plots of metamorphic temperature versus distance) across the aureole that show temperature gradients which are relatively flat and narrow (<100m). The gradients occur close to the contact and indicate a slight decrease in temperature from 500–550°C at the pluton/wall rock contact to 450–500°C at the outer margin of the aureole. One thermal profile across low-strain metasedimentary rocks located in the southern part of the aureole shows that thermal effects from emplacement extend no further than 600 m from the contact. Coexistence of andalusite and cordierite in pelitic rocks of the aureole constrain pressures to <4 kbar. Thermal modelling using an analytical solution of the conductive heat flow equation for a rectangular-shaped pluton reproduces the observed thermal maxima and profile shape. Conductive rather than convective cooling also is supported by isotopic and field evidence for limited fluid flow along the strongly deformed margin of the pluton. Simple thermal models coupled with observed high-temperature deformation features and a measured 90% attenuation of stratigraphic units in the plastically deformed western part of the pluton's aureole indicate that strain rates may have been of the order of 10^-12s^-1. Evidence for episodic heating, such as two distinct generations of andalusite growth in pelites from the aureole, alternatively may indicate a longer heating event and, therefore, slower strain rates. Thermal models also indicate that parts of the pluton still may have been above the solidus during deformation of the pluton margin and aureole.     

High to ultrahigh temperature contact metamorphism and dry partial melting of the Tasiuyak paragneiss,Northern Labrador

Contact aureoles of the anorthositic to granitic plutons of the Mesoproterozoic Nain Plutonic Suite (NPS), Labrador, are particularly well developed in the Palaeoproterozoic granulite facies, metasedimentary, Tasiuyak gneiss. Granulite facies regional metamorphism (M_R), c. 1860 Ma, led to biotite dehydration melting of the paragneiss and melt migration, leaving behind biotite‐poor, garnet–sillimanite‐bearing quartzofeldspathic rocks. Subsequently, Tasiuyak gneiss within a c. 1320 Ma contact aureole of the NPS was statically subjected to lower pressure, but higher temperature conditions (M_C), leading to a second partial melting event, and the generation of complex mineral assemblages and microstructures, which were controlled to a large extent by the textures of the M_R assemblage. This control is clearly seen in scanning electron microscopic images of thin sections and is further supported by phase equilibria modelling. Samples collected within the contact aureole near Anaktalik Brook, west of Nain, Labrador, mainly consist of spinel–cordierite and orthopyroxene–cordierite (or plagioclase) pseudomorphs after M_R sillimanite and garnet, respectively, within a quartzofeldspathic matrix. In addition, some samples contain fine‐grained intergrowths of K‐feldspar–quartz–cordierite–orthopyroxene inferred to be pseudomorphs after osumulite. Microstructural evidence of the former melt includes (i) coarse‐grained K‐feldspar–quartz–cordierite–orthopyroxene domains that locally cut the rock fabric and are inferred to represent neosome; (ii) very fine‐ to medium‐grained cordierite–quartz intergrowths interpreted to have formed by a reaction involving dissolution of biotite and feldspar in melt; and (iii) fine‐scale interstitial pools or micro‐cracks filled by feldspar interpreted to have crystallized from melt. Ultrahigh temperature (UHT) conditions during contact metamorphism are supported by (i) solidus temperatures >900 °C estimated for all samples, coupled with extensive textural evidence for contact‐related partial melting; (ii) the inferred (former) presence of osumilite; and (iii) titanium‐in‐quartz thermometry indicating temperatures within error of 900 °C. The UHT environment in which these unusual textures and minerals were developed was likely a consequence of the superposition of more than one contact metamorphic event upon the already relatively anhydrous Tasiuyak gneiss.     

Pressure-temperature Evolution of the Metapelites in the Motuo Area,the Eastern Himalayan Syntaxis

The Motuo area is located in the east of the Eastern Himalayan Syntaxis. There outcrops a sequence of high-grade metamorphic rocks, such as metapelites. Petrology and mineralogy data suggest that these rocks have experienced three stages of metamorphism. The prograde metamorphic mineral assemblages(M1) are mineral inclusions(biotite + plagioclase + quartz ± sillimanite ± Fe-Ti oxides) preserved in garnet porphyroblasts, and the peak metamorphic assemblages(M2) are represented by garnet with the lowest XSps values and the lowest XFe# ratios and the matrix minerals(plagioclase + quartz ± Kfeldspar + biotite + muscovite + kyanite ± sillimanite), whereas the retrograde assemblages(M3) are composed of biotite + plagioclase + quartz symplectites rimming the garnet porphyroblasts. Thermobarometric computation shows that the metamorphic conditions are 562–714°C at 7.3–7.4 kbar for the M1 stage, 661–800°C at 9.4–11.6 kbar for the M2 stage, and 579–713°C at 5.5–6.6 kbar for the M3 stage. These rocks are deciphered to have undergone metamorphism characterized by clockwise P-T paths involving nearly isothermal decompression(ITD) segments, which is inferred to be related to the collision of the India and Eurasia plates.     

Fluid‐fluxed melting and melt loss in a syntectonic contact metamorphic aureole from the Variscan eastern Pyrenees

Open‐system behaviour through fluid influx and melt loss can produce a variety of migmatite morphologies and mineral assemblages from the same protolith composition. This is shown by different types of granulite facies migmatite from the contact aureole of the Ceret gabbro–diorite stock in the Roc de Frausa Massif (eastern Pyrenees). Patch, stromatic and schollen migmatites are identified in the inner contact aureole, whereas schollen migmatites and residual melanosomes are found as xenoliths inside the gabbro–diorite. Patch and schollen migmatites record D1 and D2 structures in folded melanosome and mostly preserve the high‐T D2 in granular or weakly foliated leucosome. Stromatic migmatites and residual melanosomes only preserve D2. The assemblage quartz–garnet–biotite–sillimanite–cordierite±K‐feldspar–plagioclase is present in patch and schollen migmatites, whereas stromatic migmatites and residual melanosomes contain a sub‐assemblage with no sillimanite and/or K‐feldspar. A decrease in X _Fe (molar Fe/(Fe + Mg)) in garnet, biotite and cordierite is observed from patch migmatites through schollen and stromatic migmatites to residual melanosomes. Whole‐rock compositions of patch, schollen and stromatic migmatites are similar to those of non‐migmatitic rocks from the surrounding area. These metasedimentary rocks are interpreted as the protoliths of the migmatites. A decrease in the silica content of migmatites from 63 to 40 wt% SiO₂ is accompanied by an increase in Al₂O₃ and MgO+FeO and by a depletion in alkalis. Thermodynamic modelling in the NCKFMASHTO system for the different types of migmatite provides peak metamorphic conditions ~7–8 kbar and 840 °C. A nearly isothermal decompression history down to 5.5 kbar was followed by isobaric cooling from 840 °C through 690 °C to lower temperatures. The preservation of granulite facies assemblages and the variation in mineral assemblages and chemical composition can be modelled by ongoing H₂O‐fluxed melting accompanied by melt loss. The fluids were probably released by the crystallizing gabbro–diorite, infiltrating the metasedimentary rocks and fluxing melting. Release of fluids and melt loss were probably favoured by coeval deformation (D2). The amount of melt remaining in the system varied considerably among the different types of migmatite. The whole‐rock compositions of the samples, the modelled compositions of melts at the solidus at 5.5 kbar and the residues show a good correlation.