BIF-hosted iron mineral system: A review

The BIF-hosted iron ore system represents the world's largest and highest grade iron ore districts and deposits. BIF, the precursor to low- and high-grade BIF hosted iron ore, consists of Archean and Paleoproterozoic Algoma-type BIF (e.g., Serra Norte iron ore district in the Carajás Mineral Province), Proterozoic Lake Superior-type BIF (e.g., deposits in the Hamersley Province and craton), and Neoproterozoic Rapitan-type BIF (e.g., the Urucum iron ore district).The BIF-hosted iron ore system is structurally controlled, mostly via km-scale normal and strike-slips fault systems, which allow large volumes of ascending and descending hydrothermal fluids to circulate during Archean or Proterozoic deformation or early extensional events. Structures are also (passively) accessed via downward flowing supergene fluids during Cenozoic times.At the depositional site the transformation of BIF to low- and high-grade iron ore is controlled by: (1) structural permeability, (2) hypogene alteration caused by ascending deep fluids (largely magmatic or basinal brines), and descending ancient meteoric water, and (3) supergene enrichment via weathering processes. Hematite- and magnetite-based iron ores include a combination of microplaty hematite–martite, microplaty hematite with little or no goethite, martite–goethite, granoblastic hematite, specular hematite and magnetite, magnetite–martite, magnetite-specular hematite and magnetite–amphibole, respectively. Goethite ores with variable amounts of hematite and magnetite are mainly encountered in the weathering zone.In most large deposits, three major hypogene and one supergene ore stages are observed: (1) silica leaching and formation of magnetite and locally carbonate, (2) oxidation of magnetite to hematite (martitisation), further dissolution of quartz and formation of carbonate, (3) further martitisation, replacement of Fe silicates by hematite, new microplaty hematite and specular hematite formation and dissolution of carbonates, and (4) replacement of magnetite and any remaining carbonate by goethite and magnetite and formation of fibrous quartz and clay minerals.Hypogene alteration of BIF and surrounding country rocks is characterised by: (1) changes in the oxide mineralogy and textures, (2) development of distinct vertical and lateral distal, intermediate and proximal alteration zones defined by distinct oxide–silicate–carbonate assemblages, and (3) mass negative reactions such as de-silicification and de-carbonatisation, which significantly increase the porosity of high-grade iron ore, or lead to volume reduction by textural collapse or layer-compaction. Supergene alteration, up to depths of 200 m, is characterised by leaching of hypogene silica and carbonates, and dissolution precipitation of the iron oxyhydroxides.Carbonates in ore stages 2 and 3 are sourced from external fluids with respect to BIF. In the case of basin-related deposits, carbon is interpreted to be derived from deposits underlying carbonate sequences, whereas in the case of greenstone belt deposits carbonate is interpreted to be of magmatic origin. There is only limited mass balance analyses conducted, but those provide evidence for variable mobilization of Fe and depletion of SiO₂. In the high-grade ore zone a volume reduction of up to 25% is observed.Mass balance calculations for proximal alteration zones in mafic wall rocks relative to least altered examples at Beebyn display enrichment in LOI, F, MgO, Ni, Fe₂O_3total, C, Zn, Cr and P₂O₅ and depletions of CaO, S, K₂O, Rb, Ba, Sr and Na₂O. The Y/Ho and Sm/Yb ratios of mineralised BIF at Windarling and Koolyanobbing reflect distinct carbonate generations derived from substantial fluid–rock reactions between hydrothermal fluids and igneous country rocks, and a chemical carbonate-inheritance preserved in supergene goethite.Hypogene and supergene fluids are paramount for the formation of high-grade BIF-hosted iron ore because of the enormous amount of: (1) warm (100–200 °C) silica-undersaturated alkaline fluids necessary to dissolve quartz in BIF, (2) oxidized fluids that cause the oxidation of magnetite to hematite, (3) weakly acid (with moderate CO₂ content) to alkaline fluids that are necessary to form widespread metasomatic carbonate, (4) carbonate-undersaturated fluids that dissolve the diagenetic and metasomatic carbonates, and (5) oxidized fluids to form hematite species in the hypogene- and supergene-enriched zone and hydroxides in the supergene zone.Four discrete end-member models for Archean and Proterozoic hypogene and supergene-only BIF hosted iron ore are proposed: (1) granite–greenstone belt hosted, strike-slip fault zone controlled Carajás-type model, sourced by early magmatic (± metamorphic) fluids and ancient “warm” meteoric water; (2) sedimentary basin, normal fault zone controlled Hamersley-type model, sourced by early basinal (± evaporitic) brines and ancient “warm” meteoric water. A variation of the latter is the metamorphosed basin model, where BIF (ore) is significantly metamorphosed and deformed during distinct orogenic events (e.g., deposits in the Quadrilátero Ferrífero and Simandou Range). It is during the orogenic event that the upgrade of BIF to medium- and high-grade hypogene iron took place; (3) sedimentary basin hosted, early graben structure controlled Urucum-type model, where glaciomarine BIF and subsequent diagenesis to very low-grade metamorphism is responsible for variable gangue leaching and hematite mineralisation. All of these hypogene iron ore models do not preclude a stage of supergene modification, including iron hydroxide mineralisation, phosphorous, and additional gangue leaching during substantial weathering in ancient or Recent times; and (4) supergene enriched BIF Capanema-type model, which comprises goethitic iron ore deposits with no evidence for deep hypogene roots. A variation of this model is ancient supergene iron ores of the Sishen-type, where blocks of BIF slumped into underlying karstic carbonate units and subsequently experienced Fe upgrade during deep lateritic weathering.     

西澳大利亚州铁矿分布规律及矿床成因分析

西澳大利亚州铁矿资源主要分布在北部皮尔巴拉和南部的伊尔岗两个太古宙克拉通。皮尔巴拉克拉通BIF型铁矿在汤姆普赖斯山、恰那和布鲁克曼的矿石矿物组合为假象赤铁矿一微板状赤铁矿,马拉曼巴的为赤铁矿一针铁矿,CID型铁矿在罗布河和杨迪矿石类型主要为褐铁矿;伊尔岗克拉通BIF型铁矿在库里阿诺的矿石矿物组合为针铁矿一假象赤铁,比温和曼迪尕的为磁铁矿±假象赤铁矿和针铁矿±赤铁矿。BIF型铁矿为浅生一变质成矿,而CID型铁矿则是先前形成的BIF经侵蚀、搬运、沉积和埋藏作用形成。     

Microplaty hematite ore in the Yilgarn Province of Western Australia: The geology and genesis of the Wiluna West iron ore deposits

The Wiluna West small (~ 130 Mt) high-grade bedded hematite ore deposits, consisting of anhedral hematite mesobands interbedded with porous layers of acicular hematite, show similar textural and mineralogical properties to the premium high-grade low-phosphorous direct-shipping ore from Pilbara sites such as Mt Tom Price, Mt Whaleback, etc., in the Hamersley Province and Goldsworthy, Shay Gap and Yarrie on the northern margin of the Pilbara craton. Both margins of the Pilbara Craton and the northern margin of the Yilgarn craton were subjected to sub-aerial erosion in the Paleoproterozoic era followed by marine transgressions but unlike the Hamersley Basin, the JFGB was covered by comparatively thin epeirogenic sediments and not subjected to Proterozoic deformation or burial metamorphism. The Joyner's Find greenstone belt (JFGB) in the Yilgarn region of Western Australia was exhumed by middle to late Cenozoic erosion of a cover of unmetamorphosed and relatively undeformed Paleoproterozoic epeirogenic sedimentary rocks that preserved the JFGB unaltered for nearly 2 Ga; thus providing a unique snapshot of the early Proterozoic environment.Acicular hematite, pseudomorphous after acicular iron silicate, is only found in iron ore and BIF that was exposed to subaerial deep-weathering in early Paleoproterozoic times (pre 2.2 Ga) and in the overlying unconformable Paleoproterozoic conglomerate derived from these rocks and is absent from unweathered rocks (Lascelles, 2002). High-grade ore and BIF weathered during later subaerial erosion cycles contain anhedral hematite and acicular pseudomorphous goethite. The acicular hematite was formed from goethite pseudomorphs of silicate minerals by dehydration in the vadose zone under extreme aridity during early Paleoproterozoic subaerial weathering.The principal high-grade hematite deposits at Wiluna West are interpreted as bedded ore bodies that formed from BIF by loss of chert bands during diagenesis and have been locally enriched to massive hematite by the introduction of hydrothermal specular hematite. No trace of chert bands are present in the deep saprolitic hematite and hematite–goethite ore in direct contrast to shallow supergene ore in which the trace of chert bands is clearly defined by goethite replacement, voids and detrital fill. Abundant hydrothermal microplaty hematite at Wiluna West is readily distinguished by its crystallinity.The genesis of the premium ore from the Pilbara Region has been much discussed in the literature and the discovery at Wiluna West provides a unique opportunity to compare the features that are common to both districts and to test genetic models.     

Genesis history of iron ore from Mesoarchean BIF at the Wodgina mine,Western Australia

Several iron-ore deposits hosted within Mesoarchean banded iron formations (BIFs) are mined throughout the North Pilbara Craton, Western Australia. Among these, significant goethite±martite deposits (total resources >50 Mt at 55.8 wt% Fe) are distributed in the Wodgina district within 2 km of the world-class pegmatite-hosted, tantalum Wodgina deposits. In this study, we investigate the dominant controls on iron mineralisation at Wodgina and test the potential role of felsic magma-derived fluids in early alteration and upgrade of nearby BIF units. Camp-scale distribution and geochemistry of iron ore at Wodgina argue against any significant influence of identified felsic intrusions in the upgrade of BIF. Whereas, the formation of BIF-hosted goethite±martite iron ore at Wodgina involves: (i) early (ca 2950 Ma) metamorphism of BIF causing camp-scale recrystallisation of pre-existing iron oxides to form euhedral magnetite, with local enrichment to sub-economic grades (～40 wt% Fe) within or proximal to metre-wide, bedding-parallel shear zones, and (ii) later supergene lateritic enrichment of the magnetite-bearing BIF and shear zones, forming near-surface goethite±martite ore. The supergene alteration sequence includes: (i) downward progression of the oxidation front and replacement of magnetite by martite, (ii) local development of silcrete at ～40 m below the modern surface caused by the lowering of the water-table, (iii) intensive replacement of quartz by goethite, resulting in the goethite±martite ore bodies at Wodgina, and (iv) late formation of ferricrete and ochreous goethite. Goethitisation most likely took place within the hot and very wet climate that prevailed from the Paleocene to the mid-Eocene. Goethite precipitation was accompanied by the incorporation of trace elements P, Zn, As, Ni and Co, which were likely derived from supergene fluid interaction with nearby shales. Enrichment of these elements in goethite-rich ore indicates that they are potentially useful pathfinder elements for concealed ore bodies covered by trace element-depleted pedogenic silcrete and siliciclastic rocks located throughout the Wodgina mine.     

澳大利亚西部哈默斯利铁成矿省BIF富铁矿的成矿特征与控矿因素

澳大利亚西部哈默斯利铁成矿省含有世界级高品位的赤铁矿体。主要铁矿床包括芒特维尔贝克、汤姆普莱斯山、帕拉伯杜等,它们均产于元古宙早期布罗克曼BIF型含铁建造中。高品住铁矿体的空间分布明显受到元古宙区域隆起和拉张环境下形成的古老正断层系统的控制。该成矿省高品位铁矿层的形成可分为3个阶段：第1阶段为深层阶段,该阶段硅从含铁建造中淋滤出来,留下薄层状富含铁氧化物、碳酸盐岩、硅酸镁和磷灰石的残余物;第2阶段为深部大气水氧化阶段,该阶段含铁建造的磁铁矿-菱镁矿组合被氧化为赤铁矿-铁白云石,并以发育假象赤铁矿为特征;第3阶段为浅层风化作用。通过对成矿特征和成矿模式的总结,认为成矿时代、断层、褶皱等构造特征及流体和表生风化作用是富铁矿床形成的主要控矿因素。     

High-grade iron ore at Windarling, Yilgarn Craton: a product of syn-orogenic deformation, hypogene hydrothermal alteration and supergene modification in an Archean BIF-basalt lithostratigraphy

Banded iron formation (BIF)-hosted iron ore deposits in the Windarling Range are located in the lower greenstone succession of the Marda–Diemals greenstone belt, Southern Cross domain, Yilgarn Craton and constitute a total hematite–martite–goethite ore resource of minimum 52 Mt at 60 wt.% Fe (0.07 P). Banded iron formation is interlayered with high-Mg basalts at Windarling and precipitated during episodes of volcanic quiescence. Trace element content and the rare earth element (REE) ratios Y/Ho (42 to 45), Sm/Yb (1.5), together with positive La and Gd anomalies in ‘least-altered’ hematite–magnetite–metachert–BIF indicate the precipitation from Archean seawater that was fertilised by hydrothermal vent fluids with a basaltic HREE-Y signature. Hypogene iron ore in sub-greenschist facies metamorphosed BIF formed during three distinct stages: ore stage 1 was a syn- to post-metamorphic, syn-D₁, Fe–Ca–Mg–Ni–Co–P–REE metasomatism that produced local Ni–REE-rich Fe–dolomite–magnetite alteration in BIF. Hydrothermal alteration was induced by hot fluid flow controlled by brittle–ductile reactivation of BIF-basalt margins and crosscutting D₁ faults. The Ni–Co-rich content of dolomite and a shift in REE ratios in carbonate-altered BIF towards Archean mafic rock signature (Y/Ho to 31 to 40, Sm/Yb to 1 to 2 and Gd/Gd* to 1.2 to 1.4) suggest that high-Mg basalts in the Windarling Range were the primary source of introduced metals. During ore stage 2, a syn-deformational and likely acidic and oxidised fluid flow along BIF-basalt margins and within D₁ faults leached carbonate and precipitated lepidoblastic and anhedral/granoblastic hematite. High-grade magnetite–hematite ore is formed during this stage. Ore stage 3 hydrothermal specular hematite (spcH)–Fe–dolomite–quartz alteration was controlled by a late-orogenic, brittle, compressional/transpressional stage (D₄; the regional-scale shear-zone-related D₃ is not preserved in Windarling). This minor event remobilised iron oxides, carbonate and quartz to form veins and breccia but did not generate significant volumes of iron ore. Ore stage 4 involved Mesozoic(?) to recent supergene oxidation and hydration in a weathering environment reaching down to depths of ～100 to maximum 200 m below surface. Supergene ore formation involved goethite replacement of dolomite and quartz as well as martitisation. Important ‘ground preparation’ for supergene modification and upgrade were mainly the formation of steep D₁ to D₄ structures, steep BIF/basalt margins and particularly the syn-D₁ to syn-D₂ carbonate alteration of BIF that is most susceptible to supergene dissolution. The Windarling deposits are structurally controlled, supergene-modified hydrothermal iron ore systems that share comparable physical, chemical and ore-forming characteristics to other iron ore deposits in the Yilgarn Craton (e.g. Koolyanobbing, Beebyn in the Weld Range, Mt. Gibson). However, the remarkable variety in pre-, syn- and post-deformational ore textures (relative to D₁ and D₂) has not been described elsewhere in the Yilgarn and are similar to the ore deposits in high-strain zones, such as of Brazil (Quadrilátero Ferrífero or Iron Quadrangle) and Nigeria. The overall similarity of alteration stages, i.e. the sequence of hydrothermal carbonate introduction and hypogene leaching, with other greenstone belt-hosted iron ore deposits supports the interpretation that syn-orogenic BIF alteration and upgrade was crucial in the formation of hypogene–supergene iron ore deposits in the Yilgarn Craton and possibly in other Archean/Paleoproterozoic greenstone belt settings worldwide.     

Hydrothermal origin for the 2 billion year old Mount Tom Price giant iron ore deposit, Hamersley Province, Western Australia

Giant iron-ore deposits, such as those in the Hamersley Province of northwestern Australia, may contain more than a billion tonnes of almost pure iron oxides and are the world's major source of iron. It is generally accepted that these deposits result from supergene oxidation of host banded iron formation (BIF), accompanied by leaching of silicate and carbonate minerals. New textural evidence however, shows that formation of iron ore at one of those deposits, Mount Tom Price, involved initial high temperature crystallisation of magnetite-siderite-iron silicate assemblages. This was followed by development of hematite- and ferroan dolomite-bearing assemblages with subsequent oxidation of magnetite, leaching of carbonates and silicates and crystallisation of further hematite. Preliminary fluid inclusion studies indicate both low and high salinity aqueous fluids as well as complex salt-rich inclusions with the range of fluid types most likely reflecting interaction of hydrothermal brines with descending meteoric fluids. Initial hematite crystallisation occurred at about 250 °C and high fluid pressures and continued as temperatures decreased. Although the largely hydrothermal origin for mineralisation at Mount Tom Price is in conflict with previously proposed supergene models, it remains consistent with interpretations that the biosphere contained significant oxygen at the time of mineralisation. Received: 16 February 1999 / Accepted: 14 May 1999     

Field and petrographic aspects of the iron ore mineralizations of Gandhamardan hill,Keonjhor, Orissa and their genetic significance

Banded iron formations of the Iron Ore Group (Archean greenstone belts) of Jharkhand-Orissa region, India host a good number of large iron ore deposits (Fe wt %> 62). Iron ore mineralization of Gandhamardan hill is one of them where iron ores occur in two stratigraphic horizons. One is strictly confined within banded iron formation (stratabound mineralization) with irregular geometry, and show fracture filling and replacement vein-type mineralization along the fringes of hard massive ores of the core. This type of mineralization is exposed along the western slope of the hill. Hard massive and laminated ores dominate this mineralization. The other type occurs as low dipping sheet like body above banded iron formation and covered by laterites forming the top of the hill. Flaky ores dominate this mineralization with formation of hard goethitic crust near the top. Both the mineralizations contain mineralized banded iron formation corestones surrounded by hard massive or flaky iron ores. Hard massive ores are entirely represented by martite-microplaty hematite mineralogy. Hard laminated ores contain microplaty hematite and few martite grains representing early magnetites of the banded iron formation. Flaky ores are high porosity ores produced by leaching of silica, martite and microplaty hematite. Hard goethitic ores are developed due to replacement of martite and microplaty hematite or precipitation of goethite in the pore spaces.     

Mineralogy and geochemistry of banded iron formation and iron ores from eastern India with implications on their genesis

The geological complexities of banded iron formation (BIF) and associated iron ores of Jilling-Langalata iron ore deposits, Singhbhum-North Orissa Craton, belonging to Iron Ore Group (IOG) eastern India have been studied in detail along with the geochemical evaluation of different iron ores. The geochemical and mineralogical characterization suggests that the massive, hard laminated, soft laminated ore and blue dust had a genetic lineage from BIFs aided with certain input from hydrothermal activity. The PAAS normalized REE pattern of Jilling BIF striking positive Eu anomaly, resembling those of modern hydrothermal solutions from mid-oceanic ridge (MOR). Major part of the iron could have been added to the bottom sea water by hydrothermal solutions derived from hydrothermally active anoxic marine environments. The ubiquitous presence of intercalated tuffaceous shales indicates the volcanic signature in BIF. Mineralogical studies reveal that magnetite was the principal iron oxide mineral, whose depositional history is preserved in BHJ, where it remains in the form of martite and the platy hematite is mainly the product of martite. The different types of iron ores are intricately related with the BHJ. Removal of silica from BIF and successive precipitation of iron by hydrothermal fluids of possible meteoric origin resulted in the formation of martite-goethite ore. The hard laminated ore has been formed in the second phase of supergene processes, where the deep burial upgrades the hydrous iron oxides to hematite. The massive ore is syngenetic in origin with BHJ. Soft laminated ores and biscuity ores were formed where further precipitation of iron was partial or absent.     

Detrital iron-ore deposits in the Iron Ore Group of rocks,northern Orissa,eastern India

Detrital iron deposits (DID) are located adjacent to the Precambrian bedded iron deposit (BID) of Joda near the eastern limb of the horseshoe-shaped synclinorium, in the Bonai–Keonjhar belt of Orissa. The detrital ores overlie the Dhanjori Group sandstone as two isolated orebodies (Chamakpur and Inganjharan) near the eastern and western banks of the Baitarani River, respectively. The DID occur as pebble/cobble conglomerates containing iron-rich clasts cemented by goethite. Mineralogy, chemistry and lamination of these clasts are similar to that found in the nearby BID ores. Enrichment of trace and rare-earth elements in the DID relative to the BID is attributed to their concentration during the precipitation of cementing material. The detrital iron orebodies formed when Proterozoic weathering processes eroded pre-existing BID outcrops located on the Joda Ranges, and the resulting detritus accumulated in the paleochannels. In situ dissolution in association with abundant organic material produced Fe-saturated groundwater, which re-precipitated as goethite within the aggraded channel to cement the detritals. Growth of microplaty hematite in the goethite matrix suggests some level of subsequent burial metamorphism.     

Cobalt‐Bearing Grunerite in the Metamorphosed Banded Iron Formation in Orissa,India

Banded iron formation (BIF) comprising high grade iron ore are exposed in Gorumahisani‐Sulaipat‐Badampahar belt in the east of North Orissa Craton, India. The ores are multiply deformed and metamorphosed to amphibolite facies. The mineral assemblage in the BIF comprises grunerite, magnetite/martite/goethite and quartz. Relict carbonate phases are sometimes noticed within thick iron mesobands. Grunerite crystals exhibit needles to fibrous lamellae and platy form or often sheaf‐like aggregates in linear and radial arrangement. Accicular grunerite also occur within intergranular space of magnetite/martite. Grunerite needles/accicules show higher reflectivity in chert mesoband and matching reflectance with that of adjacent magnetite/martite in iron mesoband. Some grunerite lamellae sinter into micron size magnetite platelets. This grunerite has high ferrous oxide and cobalt oxide content but is low in Mg‐ and Mn‐oxide compared to the ones, reported from BIFs, of Western Australia, Nigeria, France, USA and Quebec. The protolith of this BIF is considered to be carbonate containing sediments, with high concentrations of Fe and Si but lower contents of cobalt and chromium ± Mg, Mn and Ni. During submarine weathering quartz, sheet silicate (greenalite) and Fe‐Co‐Cr (Mg‐Mn‐Ni)‐carbonate solid solution were formed. At the outset of the regional metamorphic episode grunerite, euhedral magnetite and recrystalized quartz were developed. Magnetite was grown at the expense of carbonate and later martitized under post‐metamorphic conditions. With the increasing grade of metamorphism greenalite transformed to grunerite.     

Genesis of superimposed hypogene and supergene Fe orebodies in BIF at the Madoonga deposit, Yilgarn Craton, Western Australia

The Madoonga iron ore body hosted by banded iron formation (BIF) in the Weld Range greenstone belt of Western Australia is a blend of four genetically and compositionally distinct types of high-grade (>55 wt% Fe) iron ore that includes: (1) hypogene magnetite–talc veins, (2) hypogene specular hematite–quartz veins, (3) supergene goethite–hematite, and (4) supergene-modified, goethite–hematite-rich detrital ores. The spatial coincidence of these different ore types is a major factor controlling the overall size of the Madoonga ore body, but results in a compositionally heterogeneous ore deposit. Hypogene magnetite–talc veins that are up to 3 m thick and 50 m long formed within mylonite and shear zones located along the limbs of isoclinal, recumbent F₁ folds. Relative to least-altered BIF, the magnetite–talc veins are enriched in Fe₂O_3(total), P₂O₅, MgO, Sc, Ga, Al₂O₃, Cl, and Zr; and depleted in SiO₂ and MnO₂. Mafic igneous countryrocks located within 10 m of the northern contact of the mineralised BIF display the replacement of primary igneous amphibole and plagioclase, and metamorphic chlorite by hypogene ferroan chlorite, talc, and magnetite. Later-forming, hypogene specular hematite–quartz veins and their associated alteration halos partly replace magnetite–talc veins in BIF and formed during, to shortly after, the F₂-folding and tilting of the Weld Range tectono-stratigraphy. Supergene goethite–hematite ore zones that are up to 150 m wide, 400 m long, and extend to depths of 300 m replace least-altered BIF and existing hypogene alteration zones. The supergene ore zones formed as a result of the circulation of surface oxidised fluids through late NNW- to NNE-trending, subvertical brittle faults. Flat-lying, supergene goethite–hematite-altered, detrital sediments are concentrated in a paleo-topographic depression along the southern side of the main ENE-trending ridge at Madoonga. Iron ore deposits of the Weld Range greenstone belt record remarkably similar deformation histories, overprinting hypogene alteration events, and high-grade Fe ore types to other Fe ore deposits in the wider Yilgarn Craton (e.g. Koolyanobbing and Windarling deposits) despite these Fe camps being presently located more than 400 km apart and in different tectono-stratigraphic domains. Rather than the existence of a synchronous, Yilgarn-wide, Fe mineralisation event affecting BIF throughout the Yilgarn, it is more likely that these geographically isolated Fe ore districts experienced similar tectonic histories, whereby hypogene fluids were sourced from commonly available fluid reservoirs (e.g. metamorphic, magmatic, or both) and channelled along evolving structures during progressive deformation, resulting in several generations of Fe ore.     

华北克拉通条带状铁建造中富铁矿成因类型的研究进展、远景和存在的科学问题

本文在查阅前人大量资料的基础上,对华北克拉通条带状铁建造中富铁矿的研究历史进行了回顾和总结,将研究历史分为1949年以前,1950~1965年期间,1978~1986年期间,1987~1994年期间和2009年以来5个阶段。重点介绍了鞍本地区、冀东-吕梁地区和河南舞阳地区富铁矿的基本地质特征以及典型富铁矿的研究概况,针对鞍本地区弓长岭二矿区磁铁富矿成因的复杂性,对不同成因观点以及目前已取得的共识进行了详细阐述。目前大多数学者不支持接触交代假说和菱铁矿经变质转化为富铁矿成矿假说,近半数学者支持变质热液成矿假说,半数学者支持混合岩化热液成矿假说。作者在综合分析前人大量资料后,认为变质热液成矿说依据不足,理由有四点:(1)磁铁富矿中往往见有磁铁贫矿的残体;(2)磁铁富矿与蚀变岩紧密伴生,蚀变矿物石榴子石、部分角闪石(透闪石)和部分绿泥石均属非变质热液成因;(3)研究区遭受区域高绿片岩相至低角闪岩相变质作用的时间为2500~2450Ma,而与蚀变矿物石榴石紧密伴生的热液锆石SHRIMP U-Pb定年结果为1840±7Ma,明显小于区域变质作用年龄,据此可将热液作用时间限定于古元古代晚期,相当于大陆地壳伸展阶段;(4)部分热液成因富铁矿利用Re-Os方法定年,除一种属原生沉积成矿外,年龄范围也在古元古代晚期,可作为参考。此种热液是否为混合岩化热液尚缺乏足够证据,故本文暂将其作为古元古代晚期热液。此外,本文对华北克拉通条带状铁建造中富铁矿成因类型及其远景进行了初步总结,认为古元古代晚期形成的磁铁富矿规模属大型矿床,有较好远景;原生较富贫铁矿因褶皱构造产生磁铁矿流变而形成的富铁矿(可能尚有热液叠加)规模较大,具有一定远景;其他类型均为小型规模,不具工业意义。最后,本文指出富铁矿成因研究中尚存在的主要问题,包括早元古代晚期热液的来源;热液的形成是一期还是多期;铁建造遭受区域变质达高绿片岩相时,贫铁矿的围岩变质演化机理等,尚需进一步探讨。     

Banded iron formation to high-grade iron ore: a critical review of supergene enrichment models

All the major worldwide direct-shipping iron ore deposits associated with banded iron formations (BIF) are characteristically deeply weathered. They extend to considerable depths below the water table and show well-preserved primary structures and textures, but characteristically most deposits contain no evidence of chert bands being present prior to weathering. Recent studies have found evidence of hydrothermal and/ or metamorphic influences in the development of certain ore deposits and new genesis models such as the supergene-modified hypogene model have been postulated for major high-grade iron ore deposits. Nevertheless, there are many high-grade deposits that show no evidence of hypogene alteration and for which a hypogene or metamorphic genesis is unreasonable that are automatically ascribed to supergene enrichment, commonly erroneously attributed to lateritic weathering in tropical environments. Laterite (sensu lato) is a soil formation in which primary textures are destroyed and is underlain by a pallid zone showing the preservation of chert and the depletion, not enrichment, of iron oxides and thus is totally incompatible with the formation of the high-grade ore deposits. Various theories and models that purported to explain the conditions under which such a uniquely BIF-related dissolution of quartz and residual accumulation of hematite could occur by supergene processes typically conflict with current understanding of groundwater hydrology, chemistry, weathering processes and soil formation.Supergene enrichment of ore is universal in the leaching of gangue minerals such as iron silicates, carbonates and apatite and supergene enrichment of BIF to low-grade ore is common in near surface environments above the water table such as ferrugenised BIF outcrops, detrital ore deposits, and some shallow ore deposits that have been subjected to prolonged exposure to fresh meteoric water. In all cases of supergene enrichment traces of the chert bands are visible and the dissolution or replacement processes for the removal of quartz are clear, in direct contrast to the most important deep saprolite ore deposits that show no trace of chert bands.The widespread acceptance of an inappropriate and untenable supergene enrichment model inhibits search for the true origin of the ore and our ability to predict and find concealed high-grade ore deposits.     

Mineralogy and trace-element geochemistry of the high-grade iron ores of the Águas Claras Mine and comparison with the Capão Xavier and Tamanduá iron ore deposits, Quadrilátero Ferrífero, Brazil

Several major iron deposits occur in the Quadrilátero Ferrífero (QF), southeastern region of Brazil, where metamorphosed and heterogeneously deformed banded iron formation (BIF) of the Cauê Formation, regionally called itabirite, was transformed into high- (Fe >64%) and low-grade (30%?2O₃, with a higher amount of detrimental impurities, especially MnO, in the soft ore. Both hard and soft ores are depleted in trace elements. The high-grade ores at the Águas Claras Mine have at least a dual origin, involving hypogene and supergene processes. The occurrence of the hard, massive high-grade ore within “fresh” dolomitic itabirite is evidence of its hypogene origin. Despite the contention about the origin of the dolomitic itabirite (if this rock is a carbonate-rich facies of the Cauê Formation or a hematite–carbonate precursor of the soft high-grade ore), mineralogical and geochemical features of the soft high-grade ore indicate that it was formed by leaching of dolomite from the dolomitic itabirite by meteoric water. The comparison of the Águas Claras, Capão Xavier and Tamanduá orebodies shows that the original composition of the itabiritic protore plays a major role in the genesis of high- and low-grade soft ores in the QF. Under the same weathering and structural conditions, the dolomitic itabirite is the more favorable to form high-grade deposits than siliceous itabirite. Field relations at the Águas Claras and Capão Xavier deposits suggest that it is not possible to form huge soft high-grade supergene deposits from siliceous itabirite, unless another control, such as impermeable barriers, had played an important role. The occurrence in the Tamanduá Mine of a large, soft, high-grade orebody formed from siliceous itabirite and closely associated with hypogene hard ore suggests that large, soft, high-grade orebodies of the Quadrilátero Ferrífero, which occur within siliceous itabirite, have a hypogene contribution in their formation.     

苏丹东部地区BIF型铁矿和CID型铁矿的发现及其找矿意义

在苏丹东部地区新元古代地层中,新发现的BIF铁矿是与火山岩密切相关的Algoma型铁矿,矿石品位TFe 37.78%,对进一步研究努比亚地盾的形成时代和古地理环境有一定的参考意义。苏丹79区块发现的含铁石英砂岩,呈北东向带状分布, 角度不整合于努比亚地盾之上,通过与西澳CID型铁矿对比,存在交错层理和底砾岩等明显的再生沉积特征,矿石品位TFe 31.91%～39.33%;通过对BIF型铁矿、CID型铁矿和努比亚杂砂岩三者部分元素及氧化物含量的分析对比,以及控矿地质因素分析, CID型铁矿是由BIF铁矿风化剥蚀后搬运沉积于附近古河道内;苏丹努比亚地盾区CID型铁矿的发现,为今后找矿工作提供了新目标,具有十分重要的找矿意义。     

Genesis of the channel iron deposits (CID) of the Pilbara region,Western Australia

Miocene fluvial goethite/hematite channel iron deposits (CID) are part of the Cenozoic Detritals 2 (CzD2), of the Western Australian Pilbara region. They range from gravelly mudstones through granular rocks to intraformational pebble, cobble and rare boulder conglomerates, as infill in numerous meandering palaeochannels in a mature surface that includes Precambrian granitoids, volcanics, metasediments, BIF and ferruginous Palaeogene valley fill. In the Hamersley Province of the Pilbara, the consolidated fine gravels and subordinate interbedded conglomerates, with their leached equivalents, are a major source of export iron ore. This granular ore typically comprises pedogenically derived pelletoids comprising hematite nuclei and goethite cortices (ooids and lesser pisoids), with abundant coarser goethitised wood/charcoal fragments and goethitic peloids, minor clay, and generally minimal porous goethitic matrix, with late-stage episodic solution and partial infill by secondary goethite, silica and siderite (now oxidised) in places. Clay horizons and non-ore polymictic basal and marginal conglomerates are also present. The accretionary pedogenic pelletoids were mostly derived from stripping of a mature ferruginous but apparently well-vegetated surface, developed in the Early to Middle Miocene on a wide variety of susceptible rock types including BIF, basic intrusives and sediments. This deep ferruginisation effectively destroyed most remnants of the original rock textures producing a unique surface, very different to those that produced the underlying CzD1 (Palaeogene) and the overlying CzD3 (Pliocene – Quaternary). The peloids were derived both intraformationally from fragmentation and reworking of desiccated goethite-rich muds, and from the regolith. Tiny wood/charcoal fragments replaced in soil by goethite, and dehydrated to hematite, formed nuclei for many pelletoids. Additionally, abundant small (≤10 mm) fragments of wood/charcoal, now goethite, were probably replaced in situ within the consolidating CID. This profusion of fossil wood, both as pelletoid nuclei and as discrete fragments, suggests major episodic wild fires in heavily vegetated catchments, a point supported by the abundance of kenomagnetite – maghemite developed from goethite in the pelletoids, but less commonly in the peloids. The matrix to the heterogeneous colluvial and intraformational components is essentially goethite, primarily derived from modified chemically precipitated iron hydroxyoxides, resulting from leaching of iron-rich soils in an organic environment, together with goethitic soil-derived alluvial material. Major variations in the granular ore CID after deposition have resulted from intermittent groundwater flow in the channels causing dissolution and reprecipitation of goethite and silica, particularly in the basal CID zones, with surface weathering of eroded exposures playing a role in masking some of these effects. However, significant variations in rock types in both the general CID and the granular ore CID have also resulted from the effects of varied provenance.     

庐枞盆地龙桥铁矿床中菱铁矿的地质特征和成因意义

龙桥铁矿床是庐枞火山岩盆地中的一个大型的铁矿床,多年来对其矿床成因的认识存在较大的争论.文章在野外地质研究工作的基础上,通过对矿床中菱铁矿的岩矿分析鉴定和电子探针测试,确定了矿床纹层状矿石中的菱铁矿为沉积成因.通过对菱铁矿的产出特征分析,并结合龙桥铁矿床的部分地质地球化学研究成果,认为在该矿床形成过程中,早期沉积形成了纹层状的菱铁矿层,在燕山期的岩浆热事件中,部分沉积菱铁矿被交代形成了磁铁矿和具有残余骸晶结构等一系列矿石交代组构特征的矿物.纹层状矿石既具有沉积特征,也具有热液改造特征,证实了矿床的形成存在早期(三叠纪)的沉积成矿(菱铁矿)作用和晚期(燕山期)的热液成矿(磁铁矿)作用.菱铁矿的研究为进一步确定龙桥铁矿床的成因提供了新的佐证.     

The Major Ore Clusters of Super-Large Iron Deposits in the World,Present Situation of Iron Resources in China,and Prospect

Abstract: The metamorphosed sedimentary type of iron deposits (BIF) is the most important type of iron deposits in the world, and super-large iron ore clusters of this type include the Quadrilatero Ferrifero district and Carajas in Brazil, Hamersley in Australia, Kursk in Russia, Central Province of India and Anshan-Benxi in China. Subordinated types of iron deposits are magmatic, volcanic-hosted and sedimentary ones. This paper briefly introduces the geological characteristics of major super-large iron ore clusters in the world. The proven reserves of iron ores in China are relatively abundant, but they are mainly low-grade ores. Moreover, a considerate part of iron ores are difficult to utilize for their difficult ore dressing, deep burial or other reasons. Iron ore deposits are relatively concentrated in 11 metallogenic provinces (belts), such as the Anshan-Benxi, eastern Hebei, Xichang-Central Yunnan Province and middle-lower reaches of Yangtze River. The main minerogenetic epoches vary widely from the Archean to Quaternary, and are mainly the Late Archean to Middle Proterozoic, Variscan, and Yanshanian periods. The main 7 genetic types of iron deposits in China are metamorphosed sedimentary type (BIF), magmatic type, volcanic-hosted type, skarn type, hydrothermal type, sedimentary type and weathered leaching type. The iron-rich ores occur predominantly in the skarn and marine volcanic-hosted iron deposits, locally in the metamorphosed sedimentary type (BIF) as hydrothermal reformation products. The theory of minerogenetic series of mineral deposits and minerogenic models has applied in investigation and prospecting of iron ore deposits. A combination of deep analyses of aeromagnetic anomalies and geomagnetic anomalies, with gravity anomalies are an effective method to seeking large and deep-buried iron deposits. China has a relatively great ore-searching potential of iron ores, especially for metamorphosed sedimentary, skarn, and marine volcanic-hosted iron deposits. For the lower guarantee degree of iron and steel industry, China should give a trading and open the foreign mining markets.     

华北克拉通前寒武纪BIF铁矿研究:进展与问题

研究表明,BIF铁矿在华北克拉通的分布具有一定规律性.大规模BIF铁矿主要发育在绿岩带分布区的鞍山-本溪、冀东、霍邱-舞阳、五台、鲁西和固阳等地;华北克拉通时代最古老的BIF形成于古太古代,最年轻BIF形成于古元古代早期,但BIF铁矿的峰期为新太古代晚期(2.52 ～2.56Ga);BIF铁矿类型可划分为阿尔戈马型和苏比利尔湖型两类,但华北以晚太古代绿岩带中的阿尔戈马型为主,仅吕梁的古元古代袁家村铁矿具典型苏比利尔湖型铁矿特征.根据BIF在绿岩带序列中的产出部位和岩石组合关系,可将华北BIF划分为:1)斜长角闪岩(夹角闪斜长片麻岩)-磁铁石英岩组合;2)斜长角闪岩-黑云变粒岩-云母石英片岩-磁铁石英岩组合;3)黑云变粒岩(夹黑云石英片岩)-磁铁石英岩组合;4)黑云变粒岩-绢云绿泥片岩-黑云石英片岩-磁铁石英岩组合;5)斜长角闪岩(片麻岩)-大理岩-磁铁石英岩组合等5种类型.华北克拉通BIF形成时代与早前寒武纪岩浆活动的时间基本一致(2.5～2.6Ga),但与华北克拉通陆壳增生的峰期(2.7～2.9Ga)有一定偏差,其原因可能与新太古代晚期华北克拉通构造-热事件十分强烈有关.华北克拉通新太古代BIF大多形成于岛弧环境,但局部地区(如固阳)BIF铁矿可能形成于深部有地幔柱叠加的岛弧环境.华北克拉通BIF富矿主要有三种类型:原始沉积、受后期构造-热液叠加改造和古风化壳等,但总体不发育富铁矿,国外发育的风化壳型富铁在我国甚为少见.本文认为在探讨BIF铁矿类型时,需要从绿岩带发育序列进行综合判别.阿尔戈马型铁矿一般产于克拉通基底(绿岩带)环境,苏比利尔湖型铁矿一般形成于稳定克拉通上的海相沉积盆地或被动大陆边缘.华北克拉通BIF铁矿地球化学研究结果表明,BIF铁矿无Ce负异常且Fe同位素为正值,从而暗示铁矿沉淀的环境为低氧或缺氧环境,而铕正异常可能指示BIFs为热水沉积成因,其机制可能为海水对流循环从新生镁铁质-超镁铁质洋壳中淋滤出F(e)和Si等元素,在海底排泄沉淀成矿,而条带状构造的形成可能归咎于成矿流体的脉动式喷溢.但对于BIF铁矿的物质来源、成矿条件和机制、富铁矿成因、华北克拉通不发育苏比利尔湖型铁矿的原因等方面,仍需深入研究.