On-Disc Observations of Flux Rope Formation Prior to Its Eruption

Coronal mass ejections (CMEs) are one of the primary manifestations of solar activity and can drive severe space weather effects. Therefore, it is vital to work towards being able to predict their occurrence. However, many aspects of CME formation and eruption remain unclear, including whether magnetic flux ropes are present before the onset of eruption and the key mechanisms that cause CMEs to occur. In this work, the pre-eruptive coronal configuration of an active region that produced an interplanetary CME with a clear magnetic flux rope structure at 1 AU is studied. A forward-S sigmoid appears in extreme-ultraviolet (EUV) data two hours before the onset of the eruption (SOL2012-06-14), which is interpreted as a signature of a right-handed flux rope that formed prior to the eruption. Flare ribbons and EUV dimmings are used to infer the locations of the flux rope footpoints. These locations, together with observations of the global magnetic flux distribution, indicate that an interaction between newly emerged magnetic flux and pre-existing sunspot field in the days prior to the eruption may have enabled the coronal flux rope to form via tether-cutting-like reconnection. Composition analysis suggests that the flux rope had a coronal plasma composition, supporting our interpretation that the flux rope formed via magnetic reconnection in the corona. Once formed, the flux rope remained stable for two hours before erupting as a CME.     

Deflection of Coronal Rays by Remote CMEs: Shock Wave or Magnetic Pressure?

We analyze five events of the interaction of coronal mass ejections (CMEs) with the remote coronal rays located up to 90° away from the CME as observed by the SOHO/LASCO C2 coronagraph. Using sequences of SOHO/LASCO C2 images, we estimate the kink propagation in the coronal rays during their interaction with the corresponding CMEs ranging from 180 to 920 km s⁻¹ within the interval of radial distances from 3 R _⊙ to 6 R _⊙. We conclude that all studied events do not correspond to the expected pattern of shock wave propagation in the corona. Coronal ray deflection can be interpreted as the influence of the magnetic field of a moving flux rope within the CME. The motion of a large-scale flux rope away from the Sun creates changes in the structure of surrounding field lines, which are similar to the kink propagation along coronal rays. The retardation of the potential should be taken into account since the flux rope moves at a high speed, comparable with the Alfvén speed.     

Simultaneous SOHO and Ground-Based Observations of a Large Eruptive Prominence and Coronal Mass Ejection

Coronal mass ejections (CMEs) are frequently associated with erupting prominences near the solar surface. A spectacular eruption of the southern polar crown prominence was observed on 2 June 1998, accompanied by a CME that was well-observed by the LASCO coronagraphs on SOHO. The prominence was observed in its quiescent state and was followed throughout its eruption by the SOHO EIT and later by LASCO as the bright, twisted core of the CME. Ground-based H observations of the prominence were obtained at the Ondejov Observatory in the Czech Republic. A great deal of fine structure was observed within the prominence as it erupted. The prominence motion was found to rotate about its axis as it moved outward. The CME contained a helical structure that is consistent with the ejection of a magnetic flux rope from the Sun. Similar structures have been observed by LASCO in many other CMEs. The relationship of the flux rope to other structures in the CME is often not clear. In this event, the prominence clearly lies near the trailing edge of the structure identified as a flux rope. This structure can be observed from the onset of the CME in the low corona all the way out to the edge of the LASCO field of view. The initiation and evolution of the CME are modeled using a fully self-consistent, 3D axisymmetric, MHD code.     

The Role of Interchange Reconnection in Facilitating a Filament Eruption

We study the interaction between an erupting solar filament and a nearby coronal hole, based on multi-viewpoint observations from the Solar Dynamics Observatory and STEREO. During the early evolution of the filament eruption, it exhibits a clockwise rotation that brings its easternmost leg in contact with the oppositely aligned field at the coronal hole boundary. The interaction between the two magnetic-field systems is manifested as the development of a narrow contact layer in which we see enhanced EUV brightening and bi-directional flows, suggesting that the contact layer is a region of strong and ongoing magnetic reconnection. The coronal mass ejection (CME) resulting from this eruption is highly asymmetric, with its southern portion opening up to the upper corona, while the northern portion remains closed and connected to the Sun. We suggest that the erupting flux rope that made up the filament reconnected with both the open and closed fields at the coronal hole boundary via interchange reconnection and closed-field disconnection, respectively, which led to the observed CME configuration.     

The Dependence of the EIT Wave Velocity on the Magnetic Field Strength

“EIT waves” are a wavelike phenomenon propagating in the corona, which was initially observed in the extreme ultraviolet (EUV) wavelength by the EUV Imaging Telescope (EIT). Their nature is still elusive, with the debate on-going between fast-mode wave model and non-wave model. In order to distinguish between these models, we investigate the relation between the EIT wave velocity and the local magnetic field in the corona. It is found that the two parameters show significant negative correlation in most of the EIT wave fronts, i.e., the EIT wave propagates more slowly in the regions of stronger magnetic field. Such a result poses a big challenge to the fast-mode wave model, which would predict a strong positive correlation between the two parameters. However, it is demonstrated that such a result can be explained by the fieldline stretching model, i.e., that “EIT waves” are the propagation of apparent brightenings, which are generated by successive stretching of closed magnetic field lines pushed by the erupting flux rope during coronal mass ejections (CMEs).     

Coronal mass ejections: Some possibilities for prediction

The onset stage of coronal mass ejections (CMEs) is difficult to observe and is poorly studied. In spite of their practical importance, methods for CME predictions with sufficient lead times are only in the nascent stages of development. The most probable CME mechanism is a catastrophic loss of equilibrium of a large-scale current system in the corona (a flux rope). A twisted magnetic rope is maintained by the tension of field lines of photospheric sources until parameters of the system reach critical values and the equilibrium is lost. Unfortunately, there is low-density plasma (coronal cavity) in most of the rope volume; thus, it is difficult to observe a rope. However, the lower parts of the helical field lines of a rope are fine traps for the dense cold plasma of prominences. Thus, prominences are the best tracers of flux ropes in the corona. The maximal height up to which the rope is in stable equilibrium can be found by analyzing the distribution of the magnetic field generated by photospheric sources in the corona. Comparing this critical height with the actually observed prominence height, one can estimate the probability of the loss of equilibrium by a magnetic rope with a following eruption of prominences and coronal mass ejections.     

The 26 December 2001 Solar Eruptive Event Responsible for GLE63: III. CME,Shock Waves,and Energetic Particles

The SOL2001-12-26 moderate solar eruptive event (GOES importance M7.1, microwaves up to 4000 sfu at 9.4 GHz, coronal mass ejection (CME) speed 1446 km?s^?1) produced strong fluxes of solar energetic particles and ground-level enhancement (GLE) of cosmic-ray intensity (GLE63). To find a possible reason for the atypically high proton outcome of this event, we study multi-wavelength images and dynamic radio spectra and quantitatively reconcile the findings with each other. An additional eruption probably occurred in the same active region about half an hour before the main eruption. The latter produced two blast-wave-like shocks during the impulsive phase. The two shock waves eventually merged around the radial direction into a single shock traced up to \(25~\mathrm{R}_{\odot}\) as a halo ahead of the expanding CME body, in agreement with an interplanetary Type II event recorded by the Radio and Plasma Wave Investigation (WAVES) experiment on the Wind spacecraft. The shape and kinematics of the halo indicate an intermediate regime of the shock between the blast wave and bow shock at these distances. The results show that i) the shock wave appeared during the flare rise and could accelerate particles earlier than usually assumed; ii) the particle event could be amplified by the preceding eruption, which stretched closed structures above the developing CME, facilitated its lift-off and escape of flare-accelerated particles, enabled a higher CME speed and stronger shock ahead; iii) escape of flare-accelerated particles could be additionally facilitated by reconnection of the flux rope, where they were trapped, with a large coronal hole; and iv) the first eruption supplied a rich seed population accelerated by a trailing shock wave.     

Hα Dimming Associated With the Eruption of a Coronal Sigmoid in the Quiet Sun

We report on the occurrence of Hα dimming associated with a sigmoid eruption in a quiet-sun region on 14 August 2001. The coronal sigmoid in soft X-ray images from the Yohkoh Soft X-ray Telescope was located over an Hα filament channel. Its eruption was accompanied by a flare of GOES X-ray class C2.3 and possibly associated with a halo coronal mass ejection (CME) observed with the Large Angle and Spectroscopic Coronagraphs (LASCO) on board the Solar and Heliospheric Observatory (SOHO). During the eruption, coronal bipolar double dimming took place at the regions with opposite magnetic polarities around the two sigmoid ends, but the underlying chromospheric channel did not show observable changes corresponding to the coronal eruption. Different from the erupting coronal sigmoid itself, however, the coronal dimming had a detectable chromosphere counterpart, i.e., Hα dimming. By regarding the sigmoid as a coronal sign for a flux rope, these observations are explained in the framework of the flux rope model of CMEs. The flux rope is possibly deeply rooted in the chromosphere, and the coronal and Hα dimming regions mark its evacuated feet, through which the material is possibly fed to the halo CME.     

How Many CMEs Have Flux Ropes? Deciphering the Signatures of Shocks, Flux Ropes, and Prominences in Coronagraph Observations of CMEs

We intend to provide a comprehensive answer to the question on whether all Coronal Mass Ejections (CMEs) have flux rope structure. To achieve this, we present a synthesis of the LASCO CME observations over the last 16 years, assisted by 3D MHD simulations of the breakout model, EUV and coronagraphic observations from STEREO and SDO, and statistics from a revised LASCO CME database. We argue that the bright loop often seen as the CME leading edge is the result of pileup at the boundary of the erupting flux rope irrespective of whether a cavity or, more generally, a three-part CME can be identified. Based on our previous work on white light shock detection and supported by the MHD simulations, we identify a new type of morphology, the ‘two-front’ morphology. It consists of a faint front followed by diffuse emission and the bright loop-like CME leading edge. We show that the faint front is caused by density compression at a wave (or possibly shock) front driven by the CME. We also present highly detailed multi-wavelength EUV observations that clarify the relative positioning of the prominence at the bottom of a coronal cavity with a clear flux rope structure. Finally, we visually check the full LASCO CME database for flux rope structures. In the process, we classify the events into two clear flux rope classes (‘three-part’, and ‘Loop’), jets and outflows (no clear structure). We find that at least 40 % of the observed CMEs have clear flux rope structures and that ～?29 % of the database entries are either misidentifications or inadequately measured and should be discarded from statistical analyses. We propose a new definition for flux rope CMEs (FR-CMEs) as a coherent magnetic, twist-carrying coronal structure with angular width of at least 40^° and able to reach beyond 10 R_⊙ which erupts on a time scale of a few minutes to several hours. We conclude that flux ropes are a common occurrence in CMEs and pose a challenge for future studies to identify CMEs that are clearly not FR-CMEs.     

Interpreting Solar EUV Wave Observations from Different Viewing Angles Using an MHD Model

We study the effect of projection and line-of-sight integration on the interpretation of the morphology and kinematics of EUV waves. We have performed a three-dimensional magnetohydrodynamic simulation of a coronal mass ejection (CME) erupting in an environment that mimics the low solar corona and calculated the resulting emission measure of the event from five different viewing angles. Our study provides more quantitative information about the impact of the viewing angle and projection effect on the properties of EUV waves than previous studies on the subject. Analyzing the emission measure of the lower corona reveals wave-like increases that move away from the eruption site, which we interpret as EUV waves. Behind the EUV wave front we can recognize coronal dimming regions. A comparison of the emission measure and calculated density supports the view that EUV waves are true waves. Our results show that the origin of the observed EUV wave is height-dependent, which means that the measured speed and the morphology depend on the viewing direction. Consequently, care should be taken when EUV observations are used to infer the true propagation speeds of EUV wave fronts.     

Radio Bursts Associated with Flare and Ejecta in the 13 July 2004 Event

We investigate coronal transients associated with a GOES M6.7 class flare and a coronal mass ejection (CME) on 13 July 2004. During the rising phase of the flare, a filament eruption, loop expansion, a Moreton wave, and an ejecta were observed. An EIT wave was detected later on. The main features in the radio dynamic spectrum were a frequency-drifting continuum and two type II bursts. Our analysis shows that if the first type II burst was formed in the low corona, the burst heights and speed are close to the projected distances and speed of the Moreton wave (a chromospheric shock wave signature). The frequency-drifting radio continuum, starting above 1 GHz, was formed almost two minutes prior to any shock features becoming visible, and a fast-expanding piston (visible as the continuum) could have launched another shock wave. A possible scenario is that a flare blast overtook the earlier transient and ignited the first type II burst. The second type II burst may have been formed by the same shock, but only if the shock was propagating at a constant speed. This interpretation also requires that the shock-producing regions were located at different parts of the propagating structure or that the shock was passing through regions with highly different atmospheric densities. This complex event, with a multitude of radio features and transients at other wavelengths, presents evidence for both blast-wave-related and CME-related radio emissions.     

Absorption Phenomena and a Probable Blast Wave in the 13 July 2004 Eruptive Event

We present a case study of the 13 July 2004 solar event, in which disturbances caused by eruption of a filament from an active region embraced a quarter of the visible solar surface. Remarkable are the absorption phenomena observed in the SOHO/EIT 304 Å channel, which were also visible in the EIT 195 Å channel, in the Hα line, and even in total radio flux records. Coronal and Moreton waves were also observed. Multispectral data allowed reconstructing an overall picture of the event. An explosive filament eruption and related impulsive flare produced a CME and blast shock, both of which decelerated and propagated independently. Coronal and Moreton waves were kinematically close and both decelerated in accordance with an expected motion of a coronal blast shock. The CME did not resemble a classical three-component structure, probably because some part of the ejected mass fell back onto the Sun. Quantitative evaluations from different observations provide close estimates of the falling mass, ～3×10¹⁵?g, which is close to the estimated mass of the CME. The falling material was responsible for the observed large-scale absorption phenomena, in particular, shallow widespread moving dimmings observed at 195 Å. By contrast, deep quasi-stationary dimmings observed in this band near the eruption center were due to plasma density decrease in coronal structures.     

A Major Geoeffective CME from NOAA 12371: Initiation,CME–CME Interactions,and Interplanetary Consequences

In this article, we present a multi-wavelength and multi-instrument investigation of a halo coronal mass ejection (CME) from active region NOAA 12371 on 21 June 2015 that led to a major geomagnetic storm of minimum \(\mathrm{Dst} = -204\) nT. The observations from the Atmospheric Imaging Assembly onboard the Solar Dynamics Observatory in the hot EUV channel of 94 Å confirm the CME to be associated with a coronal sigmoid that displayed an intense emission (\(T \sim6\) MK) from its core before the onset of the eruption. Multi-wavelength observations of the source active region suggest tether-cutting reconnection to be the primary triggering mechanism of the flux rope eruption. Interestingly, the flux rope eruption exhibited a two-phase evolution during which the “standard” large-scale flare reconnection process originated two composite M-class flares. The eruption of the flux rope is followed by the coronagraphic observation of a fast, halo CME with linear projected speed of 1366 km?s^?1. The dynamic radio spectrum in the decameter-hectometer frequency range reveals multiple continuum-like enhancements in type II radio emission which imply the interaction of the CME with other preceding slow speed CMEs in the corona within \(\approx10\)?–?\(90~\mbox{R} _{\odot}\). The scenario of CME–CME interaction in the corona and interplanetary medium is further confirmed by the height–time plots of the CMEs occurring during 19?–?21 June. In situ measurements of solar wind magnetic field and plasma parameters at 1 AU exhibit two distinct magnetic clouds, separated by a magnetic hole. Synthesis of near-Sun observations, interplanetary radio emissions, and in situ measurements at 1 AU reveal complex processes of CME–CME interactions right from the source active region to the corona and interplanetary medium that have played a crucial role towards the large enhancement of the geoeffectiveness of the halo CME on 21 June 2015.     

Automated Detection Of Eit Waves And Dimmings

Studies of the onset of Earth-directed coronal mass ejections (CMEs) rely on solar disk observations where CME structures are difficult to disentangle because of the diversity and transient character of the phenomena involved. Dimmings and coronal waves are among the best evidence of the large-scale reorganization of coronal magnetic fields associated with the onset of CMEs. The physical mechanism behind EIT waves is still unclear: they are considered as MHD waves and/or as a consequence of plasma compression on the extending border of a dimming. In this paper, we address the problem of automatically detecting and analyzing EIT waves and dimmings in EUV images. This paper presents a “proof of principle” that automated detection of EIT wave and dimmings is indeed possible. At the current stage of work, the method can unambiguously detect dimmings and EIT waves when applied on a typical test-case event. Moreover, we propose a way to extract these events from the data, and determine such parameters as life time, depth, area and volume of dimmings for future catalogs. For EIT waves we unambiguously define, in near solar minimum conditions, the eruption center, the front of EIT wave and its propagation velocity. In addition, we show that the presented methods yield new insights about the geometrical shape of dimmings and the connection with the EIT wave front properties, and the apparent angular rotation of the EIT wave under study.     

A Numerical Study of the Response of the Coronal Magnetic Field to Flux Emergence

Large-scale solar eruptions, known as coronal mass ejections (CMEs), are regarded as the main drivers of space weather. The exact trigger mechanism of these violent events is still not completely clear; however, the solar magnetic field indisputably plays a crucial role in the onset of CMEs. The strength and morphology of the solar magnetic field are expected to have a decisive effect on CME properties, such as size and speed. This study aims to investigate the evolution of a magnetic configuration when driven by the emergence of new magnetic flux in order to get a better insight into the onset of CMEs and their magnetic structure. The three-dimensional, time-dependent equations for ideal magnetohydrodynamics are numerically solved on a spherical mesh. New flux emergence in a bipolar active region causes destabilisation of the initial stationary structure, finally resulting in an eruption. The initial magnetic topology is suitable for the ??breakout?? CME scenario to work. Although no magnetic flux rope structure is present in the initial condition, highly twisted magnetic field lines are formed during the evolution of the system as a result of internal reconnection due to the interaction of the active region magnetic field with the ambient field. The magnetic energy built up in the system and the final speed of the CME depend on the strength of the overlying magnetic field, the flux emergence rate, and the total amount of emerged flux. The interaction with the global coronal field makes the eruption a large-scale event, involving distant parts of the solar surface.     

The coronal mass ejection associated with the loop eruption and coronal dimmings on 2009 December 13

By using the multi-wavelength observations from the Solar Terrestrial Relations Observatory (STEREO), the Solar and Heliospheric Observatory (SOHO), the Transition Region and Coronal Explorer (TRACE) and the HINODE, we study a coronal mass ejection (CME) and associated coronal dimming occurred on 2009 December 13, as a consequence of the expansion and eruption of EUV loops. The activities were probably triggered by the new flux emergence and the convergence motions, which were evident in the magnetograms from Michelson Doppler Imager (MDI) on the SOHO. The emergence led to the destabilization and eruption of the preexistent flux rope, which was highly-sheared over the polarity inversion line. Driven by the ejection of the flux rope, the overlying loops initially slowly rose and then erupted. As a result, two coronal dimming regions formed at the footprints of the loops and a B1.9 flare, about half an hour later, occurred in the eruptive region near one foot of the eruptive loops. The CME had a very close temporal and spatial relationship to the expanding loops, and it is very likely that the CME directly developed from the eruptive loops. The CME mass calculated from the EUV dimming was of the same order of the typical CME mass, suggesting that the dimming region supplied major of the mass for the CME. The kinematic evolution of the CME was basically consistent with the three-phases scenario: the initiation phase, impulsive acceleration phase, and propagation phase. The onset of the CME could be well explained by the emerging flux trigger mechanism.     

Flux-Rope Twist in Eruptive Flares and CMEs: Due to Zipper and Main-Phase Reconnection

The nature of three-dimensional reconnection when a twisted flux tube erupts during an eruptive flare or coronal mass ejection is considered. The reconnection has two phases: first of all, 3D “zipper reconnection” propagates along the initial coronal arcade, parallel to the polarity inversion line (PIL); then subsequent quasi-2D “main-phase reconnection” in the low corona around a flux rope during its eruption produces coronal loops and chromospheric ribbons that propagate away from the PIL in a direction normal to it. One scenario starts with a sheared arcade: the zipper reconnection creates a twisted flux rope of roughly one turn (\(2\pi \) radians of twist), and then main-phase reconnection builds up the bulk of the erupting flux rope with a relatively uniform twist of a few turns. A second scenario starts with a pre-existing flux rope under the arcade. Here the zipper phase can create a core with many turns that depend on the ratio of the magnetic fluxes in the newly formed flare ribbons and the new flux rope. Main phase reconnection then adds a layer of roughly uniform twist to the twisted central core. Both phases and scenarios are modeled in a simple way that assumes the initial magnetic flux is fragmented along the PIL. The model uses conservation of magnetic helicity and flux, together with equipartition of magnetic helicity, to deduce the twist of the erupting flux rope in terms the geometry of the initial configuration. Interplanetary observations show some flux ropes have a fairly uniform twist, which could be produced when the zipper phase and any pre-existing flux rope possess small or moderate twist (up to one or two turns). Other interplanetary flux ropes have highly twisted cores (up to five turns), which could be produced when there is a pre-existing flux rope and an active zipper phase that creates substantial extra twist.     

An Investigation of the CME of 3 November 2011 and Its Associated Widespread Solar Energetic Particle Event

Multi-spacecraft observations are used to study the in-situ effects of a large coronal mass ejection (CME) erupting from the farside of the Sun on 3 November 2011, with particular emphasis on the associated solar energetic particle (SEP) event. At that time both Solar Terrestrial Relations Observatory (STEREO) spacecraft were located more than 90 degrees from Earth and could observe the CME eruption directly, with the CME visible on-disk from STEREO-B and off the limb from STEREO-A. Signatures of pressure variations in the corona such as deflected streamers were seen, indicating the presence of a coronal shock associated with this CME eruption. The evolution of the CME and an associated extreme-ultraviolet (EUV) wave were studied using EUV and coronagraph images. It was found that the lateral expansion of the CME low in the corona closely tracked the propagation of the EUV wave, with measured velocities of 240±19 km?s^?1 and 221±15 km?s^?1 for the CME and wave, respectively. Solar energetic particles were observed to arrive first at STEREO-A, followed by electrons at the Wind spacecraft at L₁, then STEREO-B, and finally protons arrived simultaneously at Wind and STEREO-B. By carrying out a velocity-dispersion analysis on the particles arriving at each location, it was found that energetic particles arriving at STEREO-A were released first and that the release of particles arriving at STEREO-B was delayed by about 50 minutes. Analysis of the expansion of the CME to a wider longitude range indicates that this delay is a result of the time taken for the CME edge to reach the footpoints of the magnetic-field lines connected to STEREO-B. The CME expansion is not seen to reach the magnetic footpoint of Wind at the time of solar-particle release for the particles detected here, suggesting that these particles may not be associated with this CME.     

X-ray Ejecta,White-Light CMEs and a Coronal Shock Wave

We report on a coronal shock wave inferred from the metric type II burst of 13 January 1996. To identify the shock driver, we examined mass motions in the form of X-ray ejecta and white-light coronal mass ejections (CMEs). None of the ejections could be considered fast (> 400 km s^–1) events. In white light, two CMEs occurred in quick succession, with the first one associated with X-ray ejecta near the solar surface. The second CME started at an unusually large height in the corona and carried a dark void in it. The first CME decelerated and stalled while the second one accelerated, both in the coronagraph field of view. We identify the X-ray ejecta to be the driver of the coronal shock inferred from metric type II burst. The shock speed reported in the Solar Geophysical Data (1000–2000 km s^–1) seems to be extremely large compared to the speeds inferred from X-ray and white-light observations. We suggest that the MHD fast-mode speed in the inner corona could be low enough that the X-ray ejecta is supermagnetosonic and hence can drive a shock to produce the type II burst.