岩浆与构造作用对洋壳厚度的影响——以西北印度洋为例

洋中脊及邻区洋盆的洋壳厚度能很好地反映区域岩浆补给特征,对于研究洋中脊内部及周缘岩浆活动和构造演化过程具有很好的指示意义.西北印度洋中脊作为典型的慢速扩张洋中脊,其扩张过程与周缘构造活动具有很强的时空关系.本文利用剩余地幔布格重力异常反演了西北印度洋洋壳厚度,由此分析区域内洋壳厚度分布和岩浆补给特征.研究发现,西北印度洋洋壳平均厚度为7.8 km,受区域构造背景影响厚度变化较大.根据洋壳厚度的统计学分布特征,将区域内洋壳分为三种类型:薄洋壳(小于4.5 km)、正常洋壳(4.5~6.5 km)和厚洋壳(大于6.5 km),根据西北印度洋中脊周缘(~40 Ma内)洋壳厚度变化特征可将洋中脊划分为5段,发现洋中脊洋壳厚度受区域构造活动和地幔温度所控制,其中薄洋壳主要受转换断层影响造成区域洋壳厚度减薄,而厚洋壳主要受地幔温度和地幔柱作用影响,并在S4洋中脊段显示出较强的热点与洋中脊相互作用,同时微陆块的裂解和漂移也可能是导致洋壳厚度差异的原因之一.     

西南印度洋岩浆补给特征研究:来自洋壳厚度的证据

西南印度洋中脊为典型的超慢速扩张洋中脊,其岩浆补给具有不均匀分布的特征.洋壳厚度是洋中脊和热点岩浆补给的综合反映,因此反演洋壳厚度是研究大尺度洋中脊和洋盆岩浆补给过程的一种有效方法.本文通过对全球公开的自由空气重力异常、水深、沉积物厚度和洋壳年龄数据处理得到剩余地幔布格重力异常,并反演西南印度洋地区洋壳厚度,定量地分析了西南印度洋的洋壳厚度分布及其岩浆补给特征.研究发现,西南印度洋洋壳平均厚度7.5 km,但变化较大,标准差可达3.5 km,洋壳厚度的频率分布具有双峰式的混合偏态分布特征.通过分离双峰统计的结果,将西南印度洋洋壳厚度分为0~4.8 km的薄洋壳、4.8~9.8 km的正常洋壳和9.8~24 km的厚洋壳三种类型,洋中脊地区按洋壳厚度变化特征可划分为7个洋脊段.西南印度洋地区薄洋壳受转换断层控制明显,转换断层位移量越大,引起的洋壳减薄厚度越大,减薄范围与转换断层位移量不存在明显相关性.厚洋壳主要受控于该区众多的热点活动,其中布维热点、马里昂热点和克洛泽热点的影响范围分别约340 km,550 km和900 km.Andrew Bain转换断层北部外角形成厚的洋壳,具有与快速扩张洋中脊相似的转换断层厚洋壳特征.     

Implications of melting for stabilisation of the lithosphere and heat loss in the Archaean

The increased depth and volume of melting induced in a higher temperature Archaean mantle controls the stability of the lithosphere, heat loss rates and the thickness of the oceanic crust. The relationship between density distributions in oceanic lithosphere and the depth of melting at spreading centres is investigated by calculating the mineral proportions and densities of residual mantle depleted by extraction of melt fractions. The density changes related to compositional gradients are comparable to those produced by thermal effects for lithosphere formed from a mantle which is 200°C or more hotter than modern upper mantle. If Archaean continental crust formed initially above oceanic lithosphere, the compositional density gradients may be sufficient to preserve a thick Archaean continental lithosphere within which the Archaean age diamonds are preserved. The amount of heat advected by melts at mid-ocean ridges today is small but heat advected by melting becomes proportionally more important as higher mantle temperatures lead to a greater volume of melt and as the rate of production of oceanic plates increases. Archaean tectonics could have been dominated by spreading rates 2–3 times greater than now and with mantle temperatures between ca. 1600°C and 1800°C at the depth of the solidus. Mid-ocean ridge melting would produce a relatively thick but light refractory lithosphere on which continents could form, protected from copious volcanism and high mantle temperatures.     

Upwelling flow in Earth's mantle and sea-floor spreading

Upwelling flows in the Earth's mantle are accompanied by mass, momentum and energy transports from deep to upper layers. Those flows beneath the mid-ocean ridges give rise to sea-floor spreading. Mantle plumes, on the other hand, cause hot spots to be formed on the Earth's surface. Using the basic equations of fluid dynamics, temperature and velocity distributions in two-dimensional upwelling and cylindrical plumes can be obtained by an integral-relation method. Then the mass, momentum and energy transported to the lithosphere by these upwelling flows can readily be calculated. Based on those results we can more thoroughly discuss problems of plate dynamics, such as the driving mechanism of plate motion, the causes of formation of rift valleys over mid-ocean ridges, and the effect of mantle plumes on sea-floor spreading.     

A rolling mill effect in asthenosphere beneath oceanic spreading centers

From structural studies in seventeen ophiolite massifs, information has been drawn about the activity of the asthenosphere beneath oceanic spreading centers. This information, together with geophysical data pertaining to oceanic ridges, has been integrated into a numerical model. It is inferred that for a fast-spreading ridge (< 5 cm/yr) a local diapiric uprise of melted peridodite is superimposed to the main circulation driven by the lithosphere drifting. As a result, the upward flow splits, at a depth of 35 km, into a 10–20 km wide axial jet and a horizontal flow diverging away from the ridge. The small diapir channels upward most of the partially molten peridotites. Magmatic activity in the crust is thus constrained to an area of similar horizontal extension, in agreement with ophiolitic and oceanic data. Also in agreement with findings in ophiolites, the meeting at a few tens of kilometers away from the ridge of the two diverging mantle circulations, creates a change in shear sense of the flow. From there on, the horizontal diverging flow is compatible with lithosphere drift.     

洋中脊扩张速率对洋壳速度结构的约束

洋中脊速度结构是揭示大洋岩石圈演化过程的重要约束.为探讨不同扩张速率下洋中脊的洋壳速度结构特征,挑选了全球152处快速(全扩张速率 90mm·a-1)、慢速(全扩张速率20～50mm·a-1)和超慢速(全扩张速率20mm·a-1)扩张洋中脊和非洋中脊的洋壳1-D地震波速度结构剖面,通过筛选统计、求取平均值等方法对分类的洋壳1-D速度结构进行对比研究,获得了不同扩张速率下洋中脊洋壳速度结构差异以及洋中脊与非洋中脊洋壳速度结构差异的新认识:(1)快速、慢速和超慢速扩张洋中脊的平均正常洋壳厚度分别为6.4km、7.2km和5.3km,其中洋壳层2的厚度基本相似,洋壳厚度差异主要源自洋壳层3;其洋壳厚度变化范围分别为4.9～8.1km、4.6～8.7km和4.2～10.2km,随着洋中脊扩张速率减小,洋壳厚度的变化范围逐渐增大;(2)快速扩张洋中脊的洋壳速度大于慢速和超慢速,可能与快速扩张脊洋壳生成过程中深部高密度岩浆上涌比较充足有关;(3)非洋中脊(10Ma)的洋壳比洋中脊(10Ma)的洋壳厚～0.3km,表明洋壳厚度与洋壳年龄有一定的正相关性.     

Diapirism of depleted peridotite — a model for the origin of hot spots

A model is proposed for the origin of hot spots that depends on the existence of major-element heterogeneities in the mantle. Generation of basaltic crust at spreading centers produces a layer of residual peridotite ～20–25 km thick directly beneath the crust which is depleted in Fe/Mg, TiO₂, CaO, Al₂O₃, Na₂O and K₂O, and which has a slightly lower density than undepleted peridotite beneath it. Upon recycling of this depleted peridotite back into the deep mantle at subduction zones, it becomes gravitationally unstable, and tends to rise as diapirs through undepleted peridotite. For a density contrast of 0.05 g cm^?3, a diapir 60 km in diameter would rise at roughly 8 cm y^?1, and could transport enough heat to the base of the lithosphere to cause melting and volcanism at the surface. Hot spots are thus viewed as a passive consequence of mantle convection and fractionation at spreading centers rather than a plate-driving force.It is suggested that depleted diapirs exist with varying amounts of depletion, diameters, upward velocities and source volumes. Such variations could explain the occurrence of hot spots with widely varying lifetimes and rates of lava production. For highly depleted diapirs with very low Fe/Mg, the diapir would act as a heat source and the asthenosphere and lower lithosphere drifting across the diapir would serve as the source region of magmas erupted at the surface. For mildly depleted diapirs with Fe/Mg only slightly less than in normal undepleted mantle, the diapir could provide not only the source of heat but also most or all of the source material for the erupted magmas. The model is consistent with isotopic data that require two separate and ancient source regions for mid-ocean ridge and oceanic island basalts. The source for mid-ocean ridge basalts is considered to be material upwelling at spreading centers from the deep mantle. This material forms the oceanic lithosphere. Oceanic island basalts are considered to be derived from varying mixtures of sublithospheric and lower lithospheric material and the rising diapir itself.     

Electrical Structure in Marine Tectonic Settings

This review paper presents recent research on electrical conductivity structure in various marine tectonic settings. In at least three areas, marine electromagnetic studies for structural exploration have increasingly progressed: (1) data accumulations, (2) technical advances both for hardware and software, and (3) interpretations based on multidisciplinary approaches. The mid-ocean ridge system is the best-studied tectonic setting. Recent works have revealed evidence of conductive zones of hydrothermal circulation and axial magma chambers in the crust and partial melt zones of the mid-ocean ridge basalt source in the mantle. The role of water or dissolved hydrogen and its redistribution at mid-ocean ridges is emphasized for the conductivity pattern of the oceanic lithosphere and asthenosphere. Regions of mantle upwelling (hotspot or plume) and downwelling (subducting slab) are attracting attention. Evidence of heterogeneity exists not only in the crust and the upper mantle, but also in the mantle transition zone. Electrical conductive zones frequently overlap seismic low-velocity zones, but discrepancies are also apparent. Some studies have compared conductivity models with the results of seismic and other studies to investigate the physical properties or processes. A new laboratory-based conductivity model for matured oceanic lithosphere and asthenosphere is proposed. It takes account of both the water distribution in the mantle as well as the thermal structure. It explains observed conductivity patterns in the depth range of 60–200 km.     

Mantle flow and melting beneath oceanic ridge–ridge–ridge triple junctions

Plate boundary geometry likely has an important influence on crustal production at mid-ocean ridges. Many studies have explored the effects of geometrical features such as transform offsets and oblique ridge segments on mantle flow and melting. This study investigates how triple junction (TJ) geometry may influence mantle dynamics. An earlier study [Georgen, J.E., Lin, J., 2002. Three-dimensional passive flow and temperature structure beneath oceanic ridge-ridge-ridge triple junctions. Earth Planet. Sci. Lett. 204, 115–132.] suggested that the effects of a ridge–ridge–ridge configuration are most pronounced under the branch with the slowest spreading rate. Thus, we create a three-dimensional, finite element, variable viscosity model that focuses on the slowest-diverging ridge of a triple junction with geometry similar to the Rodrigues TJ. This spreading axis may be considered to be analogous to the Southwest Indian Ridge. Within 100 km of the TJ, temperatures at depths within the partial melting zone and crustal thickness are predicted to increase by ~ 40 °C and 1 km, respectively. We also investigate the effects of differential motion of the TJ with respect to the underlying mantle, by imposing bottom model boundary conditions replicating (a) absolute plate motion and (b) a three-dimensional solution for plate-driven and density-driven asthenospheric flow in the African region. Neither of these basal boundary conditions significantly affects the model solutions, suggesting that the system is dominated by the divergence of the surface places. Finally, we explore how varying spreading rate magnitudes affects TJ geodynamics. When ridge divergence rates are all relatively slow (i.e., with plate kinematics similar to the Azores TJ), significant along-axis increases in mantle temperature and crustal thickness are calculated. At depths within the partial melting zone, temperatures are predicted to increase by ~ 150 °C, similar to the excess temperatures associated with mantle plumes. Likewise, crustal thickness is calculated to increase by approximately 6 km over the 200 km of ridge closest to the TJ. These results could imply that some component of the excess volcanism observed in geologic settings such as the Terceira Rift may be attributed to the effects of TJ geometry, although the important influence of features like nearby hotspots (e.g., the Azores hotspot) cannot be evaluated without additional numerical modeling.     

Plume capture by divergent plate motions: implications for the distribution of hotspots,geochemistry of mid-ocean ridge basalts,and estimates of the heat flux at the core–mantle boundary

The coexistence of stationary mantle plumes with plate-scale flow is problematic in geodynamics. We present results from laboratory experiments aimed at understanding the effects of an imposed large-scale circulation on thermal convection at high Rayleigh number (10⁶≤Ra≤10⁹) in a fluid with a temperature-dependent viscosity. In a large tank, a layer of corn syrup is heated from below while being stirred by large-scale flow due to the opposing motions of a pair of conveyor belts immersed in the syrup at the top of the tank. Three regimes are observed, depending on the ratio V of the imposed horizontal flow velocity to the rise velocity of plumes ascending from the hot boundary, and on the ratio λ of the viscosity of the interior fluid to the viscosity of the hottest fluid in contact with the bottom boundary. When V≪1 and λ≥1, large-scale circulation has a negligible effect on convection and the heat flux is due to the formation and rise of randomly spaced plumes. When V>10 and λ>100, plume formation is suppressed entirely, and the heat flux is carried by a sheet-like upwelling located in the center of the tank. At intermediate V, and depending on λ, established plume conduits are advected along the bottom boundary and ascending plumes are focused towards the central upwelling. Heat transfer across the layer occurs through a combination of ascending plumes and large-scale flow. Scaling analyses show that the bottom boundary layer thickness and, in turn, the basal heat flux q depend on the Peclet number, Pe, and λ. When λ>10, q∝Pe^1/2 and when λ→1, q∝(Peλ)^1/3, consistent with classical scalings. When applied to the Earth, our results suggest that plate-driven mantle flow focuses ascending plumes towards upwellings in the central Pacific and Africa as well as into mid-ocean ridges. Furthermore, plumes may be captured by strong upwelling flow beneath fast-spreading ridges. This behavior may explain why hotspots are more abundant near slow-spreading ridges than fast-spreading ridges and may also explain some observed variations of mid-ocean ridge basalt (MORB) geochemistry with spreading rate. Moreover, our results suggest that a potentially significant fraction of the core heat flux is due to plumes that are drawn into upwelling flows beneath ridges and not observed as hotspots.     

The Mid-Atlantic Ridge between 29°N and 31°30′N in the last 10 Ma

The segmentation of the Mid-Atlantic Ridge between 29°N and 31°30′ N during the last 10 Ma was studied. Within our survey area the spreading center is segmented at a scale of 25–100 km by non-transform discontinuities and by the 70 km offset Atlantis Transform. The morphology of the spreading center differs north and south of the Atlantis Transform. The spreading axis between 30°30′N and 31°30′N consists of enéchelon volcanic ridges, located within a rift valley with a regional trend of 040°. South of the transform, the spreading center is associated with a well-defined rift valley trending 015°. Magnetic anomalies and the bathymetric traces left by non-transform discontinuities on the flanks of the Mid-Atlantic Ridge provide a record of the evolution of this slow-spreading center over the last 10 Ma. Migration of non-transform offsets was predominantly to the south, except perhaps in the last 2 Ma. The discontinuity traces and the pattern of crustal thickness variations calculated from gravity data suggest that focused mantle upwelling has been maintained for at least 10 Ma south of 30°30′ N. In contrast, north of 30°30′N, the present segmentation configuration and the mantle upwelling centers inferred from gravity data appear to have been established more recently. The orientation of the bathymetric traces suggests that the migration of non-transform offsets is not controlled by the motion of the ridge axis with respect to the mantle. The evolution of the spreading center and the pattern of segmentation is influenced by relative plate motion changes, and by local processes, perhaps related to the amount of melt delivered to spreading segments. Relative plate motion changes over the last 10 Ma in our survey area have included a decrease in spreading rate from 32 mm a⁻¹ to 24 mm a⁻¹, as well as a clockwise change in spreading direction of 13° between anomalies 5 and 4, followed by a counterclockwise change of 4° between anomaly 4 and the present. Interpretation of magnetic anomalies indicates that there are significant variations in spreading asymmetry and rate within and between segments for a given anomaly time. These differences, as well as variations in crustal thickness inferred from gravity data on the flanks of spreading segments, indicate that magmatic and tectonic activity are, in general, not coordinated between adjacent spreading segments.     

洋中脊构造及地震调查现状

介绍了洋中脊的全球分布和构造特征,对全球主要的、不同扩张速率的洋中脊进行了分类和列表描述;对洋中脊的构造特征,如地形特征、地壳厚度与扩张速率的关系及扩张轴下的岩浆房的特征、洋中脊与地幔柱的相互作用进行了阐述。回顾了海底地震仪在洋中脊构造调查中的应用及取得的主要成果。简要介绍了我国将用海底地震仪开展洋中脊构造调查的技术路线。     

The Reykjanes Ridge: structure and tectonics of a hot-spot-influenced, slow-spreading ridge, from multibeam bathymetry, gravity and magnetic investigations

We report a comprehensive morphological, gravity and magnetic survey of the oblique- and slow-spreading Reykjanes Ridge near the Iceland mantle plume. The survey extends from 57.9°N to 62.1°N and from the spreading axis to between 30 km (3 Ma) and 100 km (10 Ma) off-axis; it includes 100 km of one arm of a diachronous ‘V-shaped' or ‘chevron' ridge. Observed isochrons are extremely linear and 28° oblique to the spreading normal with no significant offsets. Along-axis there are ubiquitous, en-echelon axial volcanic ridges (AVRs), sub-normal to the spreading direction, with average spacing of 14 km and overlap of about one third of their lengths. Relict AVRs occur off-axis, but are most obvious where there has been least axial faulting, suggesting that elsewhere they are rapidly eroded tectonically. AVRs maintain similar plan views but have reduced heights nearer Iceland. They are flanked by normal faults sub-parallel to the ridge axis, the innermost of which occur slightly closer to the axis towards Iceland, suggesting a gradual reduction of the effective lithospheric thickness there. Generally, the amplitude of faulting decreases towards Iceland. We interpret this pattern of AVRs and faults as the response of the lithosphere to oblique spreading, as suggested by theory and physical modelling. An axial, 10–15 km wide zone of high acoustic backscatter marks the most recent volcanic activity. The zone's width is independent of the presence of a median valley, so axial volcanism is not primarily delimited by median valley walls, but is probably controlled by the lateral distance that the oblique AVRs can propagate into off-axis lithosphere. The mantle Bouguer anomaly (MBA) exhibits little mid- to short-wavelength variation above a few milliGals, and along-axis variations are small compared with other parts of the Mid-Atlantic Ridge. Nevertheless, there are small axial deeps and MBA highs spaced some 130 km along-axis that may represent subdued third-order segment boundaries. They lack coherent off-axis traces and cannot be linked to Oligocene fracture zones on the ridge flanks. The surveyed chevron ridge is morphologically discontinuous, comprising several parallel bands of closely spaced, elevated blocks. These reflect the surrounding tectonic fabric but have higher fault scarps. There is no evidence for off-axis volcanism or greater abundance of seamounts on the chevron. Free-air gravity over it is greater than expected from the observed bathymetry, suggesting compensation via regional rather than pointwise isostasy. Most of the observed variation along the ridge can be ascribed to varying distance from the mantle plume, reflecting changes in mantle temperature and consequently in crustal thickness and lithospheric strength. However, a second-order variation is superimposed. In particular, between 59°30′N and 61°30′N there is a minimum of large-scale faulting and crustal magnetisation, maximum density of seamounts, and maximum axial free-air gravity high. To the north the scale of faulting increases slightly, seamounts are less common, and there is a relative axial free-air low. We interpret the 59°30′N to 61°30′N region as where the latest chevron ridge intersects the Reykjanes Ridge axis, and suggest that the morphological changes that culminate there reflect a local temperature high associated with a transient pulse of high plume output at its apex.     

Melt-filled hybrid fractures in the oceanic mantle: Melt enhanced deformation during along-axis flow beneath a propagating spreading ridge axis

Mid-ocean ridges represent important locations for understanding the interactions between deformation and melt production, transport, and emplacement. Melt transport through the mantle beneath mid-ocean ridges is closely associated with deformation. Currently recognized transport and emplacement processes at ridges include: 1) dikes and sills filling stress-controlled fractures, 2) porous flow in a divergent flow field, 3) self-organizing porous dunite channels, and 4) shear zones. Our recent observations from the sub-oceanic mantle beneath a propagating ridge axis in the Oman ophiolite show that gabbronorite and olivine gabbro dikes fill hybrid fractures that show both shear and extensional components of strain. The magnitudes of shear strain recorded by the dikes are significant and comparable to the longitudinal extensions across the dikes. We suggest that the hybrid dikes form from the interactions between shear deformation and pressurized melt in regions of along-axis flow at mid-ocean ridges. The displacement across the dikes is kinematically compatible with high temperature flow recorded by plastic fabrics in host peridotites. Field observations and mechanical considerations indicate that the dikes record conditions of higher stress and lower temperature than those recorded by the plastic flow fabrics. The features of hybrid dikes suggest formation during progressive deformation as conditions changed from penetrative plastic flow to strain localization along melt-filled fractures. The combined dataset indicates that the dikes are formed during along-axis flow away from regions of diapiric upwelling at propagating ridge segments. Hybrid dikes provide a potentially powerful kinematic indicator and strain recorder and define a previously unrecognized mechanism of melt migration. Our calculations show that hybrid dikes require less melt pressure to form than purely tensile dikes and thus may provide a mechanism to tap melt reservoirs that are under-pressurized with respect to lithostatic pressure.     

论青藏高原及邻区板片构造的一个新模式

本文首先论述了板块学说提出的过程和存在的一些不足与疑问,特别是该学说将Holmes（1948）的地幔热对流说作为驱使岩石圈板块运动的动力机制.而后又以青藏高原及邻区为例,根据区域地质、蛇绿岩和地质构造研究的成果,特别是地震测深研究的成果,详细地论证了本区不存在有大洋中脊扩张成为大洋盆地的新大洋和大洋板块简单的B型俯冲模式,但存在有海底扩张的陆间海和海洋地壳板片（蛇绿岩构造岩片）的仰冲以及大陆岩石圈板片复杂的A型俯冲新模式.新模式不是以地幔对流运动,而是以扩张分离A型俯冲的大陆岩石圈板片与软流圈之间的水平剪切相对运动机制作为它的躯动力.     

An evaluation of the global variations in the major element chemistry of arc basalts

Arc volcanoes occur at convergent margins with a wide range in subduction parameters, and variations in these parameters might be expected to lead to variations in the chemistry of magmas parental to arcs. Major element analyses from approximately 100 volcanic centers within 30 arcs, normalized to 6% MgO to minimize the effects of crystal fractionation, display wide variations. Na₂O and CaO at 6% MgO (Na_6.0 and Ca_6.0) correlate remarkably well with the thickness of the overlying crust. These systematics are consistent with two possible models. In the first model, the crust behaves as a chemical filter; where the crust is thick, magmas crystallize at higher pressure and interact more extensively with the arc crust. Modeling of high-pressure crystallization and assimilation, however, does not reproduce the associated variations in Na_6.0 and Ca_6.0 without calling upon complicated combinations of fractionating phases and assimilants. In the second model, crustal thickness determines the height of the mantle column available for melting beneath arc volcanoes. If melting begins beneath arcs at similar depths, then the column of mantle that undergoes decompression melting is much shorter beneath the thickest arc crust. The shorter mantle column for arcs built on thick crust will lead to smaller extents of melting in the mantle, and hence higher Na_6.0 and lower Ca_6.0 in the parental magmas. Modeling shows that variations in the extent of melting in the mantle can easily account for the associated variations in Ca_6.0 and Na_6.0. The abundances of the other major elements at 6% MgO do not correlate well with crustal thickness, or any other subduction parameter. Co-variation of some of these other major elements (e.g., Si_6.0 and Fe_6.0) within individual arcs suggests that they are strongly influenced by local crustal level processes that obscure partial melting systematics. Correction for the crustal processes improves the relationship between Na_6.0 and Ca_6.0 that is so readily explained by partial melting. The extents of melting in the mantle beneath arc volcanoes estimated from the ranges in Na_6.0 and Ca_6.0 are remarkably similar to those estimated beneath mid-ocean ridges. This observation provides further evidence that the mantle wedge, and not the slab, melts beneath arc volcanic fronts.     

Geochemical characteristics of Carboniferous greenstones in the Inner Zone of Southwest Japan

Abstract Greenstones, representing remnants of paleo-oceanic crust, occur in Permian and Jurassic accretionary complexes of the Inner Zone in the Southwestern Japan arc. The formation age of most of the greenstones is early Carboniferous, based on fossil ages for overlying limestones and Sm-Nd isotope ages of the greenstones themselves. The geochemistry of such greenstones is similar to those of present-day oceanic islands. Greenstones of the Permian accretionary complex (Akiyoshi belt) are alkalic and tholeiitic in composition. Some alkali basalts show peculiar features from an EM-1 mantle source, such as the Gough Island and Tristan da Chunha basalts in the South Atlantic. Greenstones of the Jurassic accretionary complex (Tamba belt) are also alkali and tholeiitic basalts with both basalt types in the northern part of the Tamba belt coming from strongly depleted characters similar to a mid-ocean ridge basalt source mantle. The variable geochemistry of the oceanic basalts is explained by hypothesis on existence of a Carboniferous mantle plume below the spreading ridge which divides the Farallon and Izanagi plates. The Akiyoshi belt seamounts and/or oceanic islands of the Farallon plate and Tamba belt seamounts and/or oceanic islands of the Izanagi plate formed simultaneously by the upwelling of the thermal plume. Some part of the Akiyoshi belt basalts originated locally from an EM-1 mantle source, while basalts from the northern parts of the Tamba belt have a normal-type mid-ocean ridge basalt (N-MORB) source component. Existence of an N-MORB signature is consistent with the presence of a spreading center in a Carboniferous 'Pacific Ocean' that caused separation of the Farallon and Izanagi plates. Disparity in accretion ages of the basaltic rocks in the Permian and Jurassic may have been caused by differences in the relative motion of the two plates.     

Fluxes of fluid and heat from the oceanic crustal reservoir

Recent discoveries define a global scale fluid reservoir residing within the uppermost igneous oceanic crust, a region of seafloor that is both warm and may harbor a substantial biosphere. This hydrothermal fluid reservoir formed initially within volcanic rocks newly erupted at mid-ocean ridges, but extends to the vastly larger and older ridge flanks. Upper oceanic crust is porous and permeable due to the presence of lava drainbacks, fissuring, and inter-unit voids, and this porosity and permeability allows active fluid circulation to advect measurable quantities of lithospheric heat from the crust to an average age of 65 Myr. A compilation of crustal porosities shows that this fluid reservoir contains nearly 2% of the total volume of global seawater. Heat flow and sediment thickness data allow calculation of reservoir temperatures, predicting 40°C mean temperatures in Cretaceous crust. Utilizing these temperature estimates, heat flow measurements and models for the thermal structure and evolution of the oceanic lithosphere, we have computed mean hydrothermal fluxes into the deep ocean as a function of plate age. The total hydrothermal volume flux into the oceans approaches 20% of the total riverine input and may contribute to the global seawater mass balance.     

Segmentation of the southern Mariana back-arc spreading center

SeaBeam multibeam bathymetry obtained during cruise SO-69 of research vessel (R/V) Sonne defines the segmentation and structure of ∼ 300 km of the Mariana back-arc spreading center south of the Pagan fracture zone at 17°33'N. Eight ridge segments, ranging from 14 to 64 km in length, are displaced as much as 2.7–14.5 km by both right- (predominantly) and left-lateral offsets and transform faults. An axial ridge commonly occupies the middle portion of the rift valley and rises from 200 to 700 m above the adjacent sea floor, in places shoaling to a water depth of 3200 m. An exception is the 60-km-long segment between 16°58' and 17°33'N where single peaks only a few tens of meters high punctuate the rift axis. Photographic evidence and rock samples reveal the presence of mostly pillow lavas outcropping on the axial ridges or peaks whereas the deeper parts of the rift valley floor (max. depth 4900 m) are heavily to totally sedimented. Abundant talus ramps along fault scarps testify to ongoing disruption of the crust. Lozenge-shaped collapse structures are covered by layers of sediment up to tens of centimeters thick on the rift valley floor. The presence of discrete volcanic ridges in the southern Mariana back-arc spreading region suggests that emplacement of oceanic crust at this slow spreading center occurs by `multi-site' injection of magma. Along-axis variations in length, crestal depth, and size of the axial ridges can be best explained by different stages in the cyclicity of magma supply along-axis.