Analysis and prediction of vortex-induced vibrations of variable-tension vertical risers in linearly sheared currents

Many studies have tackled the problem of vortex-induced vibrations (VIV) of a vertical riser with a constant tension and placed in uniform currents. In this study, attention is focused on the cross-flow VIV modelling, time-domain analysis and prediction of variable-tension vertical risers in linearly sheared currents. The partial-differential equation governing the riser transverse motion is based on a flexural tensioned-beam model with typical pinned-pinned supports. The hydrodynamic excitation model describing the modulation of lift force is based on a distributed van der Pol wake oscillator whose nonlinear equation is also partial-differential due to the implementation of a diffusion term. The variation of empirical wake coefficients with system parameters and the water depth-dependent Reynolds number is introduced. Based on the assumed Fourier mode shape functions obtained by accounting for the effect of non-uniform tension, the Galerkin technique is utilized to construct a low-dimensional multi-mode model governing the coupled fluid-riser interaction system due to VIV. Numerical simulations in the case of varying sheared flow profiles are carried out to systematically evaluate riser nonlinear dynamics and highlight the influence of fluid-structure parameters along with associated VIV aspects. In particular, the effects of shear and tensioned-beam (tension versus bending) parameters are underlined. Some comparisons with published experimental results and observations are qualitatively and quantitatively discussed. Overall parametric analysis and prediction results may be worthwhile for being a new benchmark against future experimental testing and/or numerical results predicted by an alternative model and methodology.     

Vortex modes and vortex-induced vibration of a long,flexible riser

Investigations of the velocity and vorticity fields in the wake of a flexible riser with a length to diameter ratio of 181 were conducted in a towing tank at moderate Reynolds numbers in the range of 9400–47,000. Wake velocity measurements were made with the riser freely vibrating in both in-line and cross-flow directions. The motion and wake field of the riser, undergoing free vibration, were simultaneously measured by accelerometers installed inside the riser and by using a digital particle image velocimetry (DPIV) system. The vortex-induced vibration (VIV) results show that the riser freely oscillated at multiple vibration frequencies and amplitudes at each Reynolds number. Mixed vortex modes, ‘2S’, ‘2P’ and ‘P+S’, were observed in the near wake of the riser at different instants of time. The occurrence of these vortex modes depended on the Reynolds number, dominant frequency and mean amplitude. At lower Reynolds number, the single stable mode ‘2S’ dominated the wake. With the increase of Reynolds number, the percentage of the ‘2S’ modes decreased while the percentage of ‘2P’ modes increased steadily except at Reynolds numbers of 14,100 and 47,000. The ‘P+S’ modes occurred mostly at a Reynolds number of 14,100 accompanied by more ‘2P’ modes and less ‘2S’ modes. At this Reynolds number, the frequency of the VIV was very close to the natural frequency of 0.72 Hz, which was obtained from a riser decay test in steady water and the average amplitude to diameter ratio reached 0.95, the highest found in these tests.     

Laboratory tests of vortex-induced vibrations of a long flexible riser pipe subjected to uniform flow

Laboratory tests have been conducted on vortex-induced vibration (VIV) of a long flexible riser towed horizontally in a wave basin. The riser model has an external diameter of 16 mm and a total length of 28.0 m giving an aspect ratio of about 1750. Reynolds numbers ranged from about 3000 to 10,000. Fiber optic grating strain gages are adopted to measure the dynamic response in both cross-flow and in-line directions. The cross-flow vibrations were observed to vibrate at modes up to 6 and the in-line reached up to 12. The fundamental response frequencies can be predicted by a Strouhal number of about 0.18. Multi-mode responses and the asymmetry of the bare pipe response in uniform flow were observed and analyzed. The experimental results confirmed that the riser pipe vibrated multi-modally despite it being subject to a uniform current profile and all of the excited modes vibrated at the Strouhal frequency. The asymmetrical distribution of displacement mainly resulted from the modal composition. Higher harmonics of the VIV response such as the third, fourth and fifth harmonics frequencies were found to be steady over the entire duration of the test even if they varied along the length of the riser pipe.     

非均匀流中立管涡激振动模型预测分析

文中分析了非均匀流中,张紧式海洋立管的涡激振动,采用新的加速度耦合尾流振子模型作为预测细长海洋工程柔性结构的计算工具,将预测结果中的横向位移包络线及最大幅值与实验观测值、shear7软件计算值进行了对比,可以发现模型的计算结果与实验观测结果吻合得很好.     

Numerical Prediction of Vortex Induced Vibrations on Top Tensioned Riser in Consideration of Internal Flow

In consideration of the effect of the internal flowing fluid and the external marine environmental condition on the vortex-induced vibration （VIV） of top tensioned riser （Till）, the differential equation is derived based on work-energy principles and the riser near wake dynamics is modeled by Facchinetti＇ s wake oscillator model. Then Galerkin＇ s finite element approximation is implemented to derive the nonlinear matrix equation of the coupled equations and file corresponding numerical programs are compiled which solve the coupled equations directly in the time domain. The comparison of the predicted results with the recent experimental results and the prediction of SHEAR7 is performed. The results show the validity of the proposed method on the prediction of VIV of deep water risers. The effect of internal flow on the dynamic characteristics and dynmnic response of the riser is analyzed and several valuable conelusions are drawn.     

Numerical Prediction of Vortex-Induced Vibrations on Top Tensioned Riser in Consideration of Internal Flow

In consideration of the effect of the internal flowing fluid and the external marine environmental condition on the vortex-induced vibration (VIV) of top tensioned riser (TTR), the differential equation is derived based on work-energy principles and the riser near wake dynamics is modeled by Facchinetti''s wake oscillator model.Then Galerkin''s finite element approximation is implemented to derive the nonlinear matrix equation of the coupled equations and the corresponding numerical programs are compiled which solve the coupled equations directly in the timedomain. The comparison of the predicted results with the recent experimental results and the prediction of SHEAR7is performed. The results show the validity of the proposed method on the prediction of VIV of deep water risers.The effect of internal flow on the dynamic characteristics and dynamic response of the riser is analyzed and severalvaluable conclusions are drawn.     

Experimental Investigation on Vortex-Induced Vibration of Steel Catenary Riser

Steel catenary riser(SCR) is the transmission device between the seabed and the floating production facilities. As developments move into deeper water, the fatigue life of the riser can become critical to the whole production system, especially due to the vortex-induced vibration(VIV), which is the key factor to operational longevity. As a result, experimental investigation about VIV of the riser was performed in a large plane pool which is 60 m long, 36 m wide and 6.5 m deep. Experiments were developed to study the influence of current speed and seabed on VIV of SCR. The results show that amplitudes of strain and response frequencies increase with the current speed both in cross-flow(CF) and in-line(IL). When the current speed is high, multi-mode response is observed in the VIV motion. The amplitudes of strain in IL direction are not much smaller than those in CF direction. The seabed has influence on the response frequencies of riser and the positions of damage for riser.     

High aspect ratio (L/D) riser VIV prediction using wake oscillator model

A two-dimensional (2-D) vortex-induced vibration (VIV) prediction model for high aspect ratio (L/D) riser subjected to uniform and sheared flow is studied in this paper. The nonlinear structure equations are considered. The near wake dynamics describing the fluctuating nature of vortex shedding is modeled using classical van der Pol equation. A new approach was applied to calibrate the empirical parameters in the wake oscillator model. Compared the predicted results with the experimental data and computational fluid dynamic (CFD) results. Good agreements are observed. It can be concluded that the present model can be used as simple computational tool in predicting some aspects of VIV of long flexible structures.     

Experimental Investigation on Vortex-Induced Vibration of Steel Catenary Riser

Steel catenary riser (SCR) is the transmission device between the seabed and the floating production facilities. As developments move into deeper water, the fatigue life of the riser can become critical to the whole production system, especially due to the vortex-induced vibration (VIV), which is the key factor to operational longevity. As a result, experimental investigation about VIV of the riser was performed in a large plane pool which is 60 m long, 36 m wide and 6.5 m deep. Experiments were developed to study the influence of current speed and seabed on VIV of SCR. The results show that amplitudes of strain and response frequencies increase with the current speed both in cross-flow (CF) and in-line (IL). When the current speed is high, multi-mode response is observed in the VIV motion. The amplitudes of strain in IL direction are not much smaller than those in CF direction. The seabed has influence on the response frequencies of riser and the positions of damage for riser.     

基于能量竞争载荷模型的海洋立管双向涡激振动时域预报方法研究

海洋立管是深海油气开发中用于连接海底井口和水面浮体的唯一通道。立管在洋流作用下极易发生涡激振动（vortex-induced vibration,简称VIV）,发展快速经验性涡激振动时域预报方法对立管的安全设计具有重要意义。通过柔性立管模型试验,结合载荷重构方法和最小二乘法,识别建立了能量竞争载荷模型下的经验水动力载荷系数模型。应用识别建立的经验水动力载荷系数模型,发展形成了海洋立管顺流向及横流向双向涡激振动时域预报方法。将预报结果与试验结果对比,结果表明：基于能量竞争载荷模型的海洋立管双向涡激振动预报方法能够有效预报海洋立管涡激振动主导模态、主导频率、流向平均位移响应和涡激振动位移响应等力学行为特性。研究成果对发展更为有效的涡激振动预报手段具有有益参考。     

Laboratory Measurements of Vortex- and Wake-Induced Vibrations of A Tandem Arrangement of Two Flexible Risers

The dynamic response of two flexible model risers in tandem arrangement immersed in a stepped current was analyzed. The risers, with an external diameter of 20 mm and a total length of 6200 mm, had an aspect ratio of 310. They were hinged to the support structure at the center-to-center distances away 3?12 times the external diameter. The top 1200 mm was exposed to a uniform current at a speed which was up to 0.9 m/s (the Reynolds number was 18000) and the rest in still water. The dynamic responses, which were obtained through the Fiber Bragg Grating strain gauges mounted on the surface, were analyzed by studying the cross-flow amplitudes and modal weights. The cross-flow vibration were observed up to the third mode, and the modal transformation from the second mode to the third mode was clearly observed. The experiment confirmed that the typical vortex-induced vibration (VIV) had occurred on the up-stream riser. But for the down-stream riser, the main excitation mechanism was wake-induced vibration (WIV). The modal transformation of WIV was more complex than that of VIV, which might be helpful for other researchers to study the interference effect.     

Tension and Drag Forces of Flexible Risers Undergoing Vortex-Induced Vibration

This paper presents the results of an experimental investigation on the variation in the tension and the distribution of drag force coefficients along flexible risers under vortex-induced vibration (VIV) in a uniform flow for Reynolds numbers (Re) up to 2.2×10⁵. The results show that the mean tension is proportional to the square of the incoming current speed, and the tension coefficient of a flexible riser undergoing VIV can be up to 12. The mean drag force is uniformly and symmetrically distributed along the axes of the risers undergoing VIV. The corresponding drag coefficient can vary between 1.6 and 2.4 but is not a constant value of 1.2, as it is for a fixed cylinder in the absence of VIV. These experimental results are used to develop a new empirical prediction model to estimate the drag force coefficient for flexible risers undergoing VIV for Reynolds number on the order of 10⁵, which accounts for the effects of the incoming current speed, the VIV dominant modal number and the frequency.     

Experimental Study on Response Performance of VIV of A Flexible Riser with Helical Strakes

Laboratory tests were conducted on a flexible riser with and without helical strakes. The aim of the present work is to further understand the response performance of the vortex induced vibration(VIV) for a riser with helical strakes. The experiment was accomplished in the towing tank and the relative current was simulated by towing a flexible riser in one direction. Based on the modal analysis method, the displacement responses can be obtained by the measured strain. The strakes with different heights are analyzed here, and the response parameters like strain response and displacement response are studied. The experimental results show that the in-line(IL) response is as important as the cross-flow(CF) response, however, many industrial analysis methods usually ignore the IL response due to VIV. The results also indicate that the response characteristics of a bare riser can be quite distinct from that of a riser with helical strakes, and the response performance depends on the geometry on the helical strakes closely. The fatigue damage is further discussed and the results show that the fatigue damage in the CF direction is of the same order as that in the IL direction for the bare riser. However, for the riser with helical strakes, the fatigue damage in the CF direction is much smaller than that in the IL direction.     

Experimental Study on Response Performance of VIV of A Flexible Riser with Helical Strakes

Laboratory tests were conducted on a flexible riser with and without helical strakes. The aim of the present work is to further understand the response performance of the vortex induced vibration (VIV) for a riser with helical strakes. The experiment was accomplished in the towing tank and the relative current was simulated by towing a flexible riser in one direction. Based on the modal analysis method, the displacement responses can be obtained by the measured strain. The strakes with different heights are analyzed here, and the response parameters like strain response and displacement response are studied. The experimental results show that the in-line (IL) response is as important as the cross-flow (CF) response, however, many industrial analysis methods usually ignore the IL response due to VIV. The results also indicate that the response characteristics of a bare riser can be quite distinct from that of a riser with helical strakes, and the response performance depends on the geometry on the helical strakes closely. The fatigue damage is further discussed and the results show that the fatigue damage in the CF direction is of the same order as that in the IL direction for the bare riser. However, for the riser with helical strakes, the fatigue damage in the CF direction is much smaller than that in the IL direction.     

Experimental Study on Coupled Cross-Flow and in-Line Vortex-Induced Vibration of Flexible Risers

In this work, we study the coupled cross-flow and in-line vortex-induced vibration （VIV） of a fixedly mounted flexible pipe, which is free to move in cross-flow （ Y- ） and in-line （ X- ） direction in a fluid flow where the mass and natural frequencies are precisely the same in both X- and Y-direction. The fluid speed varies from low to high with the corresponding vortex shedding frequency varying from below the first natural frequency to above the second natural frequency of the flexible pipe. Particular emphasis was placed on the investigation of the relationship between in-line and cross-flow vibration. The experimental results analyzed by using these measurements exhibits several valuable features.     

A Novel Wake Oscillator Model for Vortex-Induced Vibrations Prediction of A Cylinder Considering the Influence of Reynolds Number

It is well known that the Reynolds number has a significant effect on the vortex-induced vibrations (VIV) of cylinders. In this paper, a novel in-line (IL) and cross-flow (CF) coupling VIV prediction model for circular cylinders has been proposed, in which the influence of the Reynolds number was comprehensively considered. The Strouhal number linked with the vortex shedding frequency was calculated through a function of the Reynolds number. The coefficient of the mean drag force was fitted as a new piecewise function of the Reynolds number, and its amplification resulted from the CF VIV was also taken into account. The oscillating drag and lift forces were modelled with classical van der Pol wake oscillators and their empirical parameters were determined based on the lock-in boundaries and the peak-amplitude formulas. A new peak-amplitude formula for the IL VIV was developed under the resonance condition with respect to the mass-damping ratio and the Reynolds number. When compared with the results from the experiments and some other prediction models, the present model could give good estimations on the vibration amplitudes and frequencies of the VIV both for elastically-mounted rigid and long flexible cylinders. The present model considering the influence of the Reynolds number could generally provide better results than that neglecting the effect of the Reynolds number.     

Experimental investigation of the forces and motion responses of two interfering VIV circular cylinders at various tandem and staggered positions

Experimental results are presented in the paper of two elastically supported rigid circular cylinders subjected to steady flows in a flume. The two cylinders were initially placed at various tandem and staggered positions with one in the wake of the other when subject to the steady flows. The in-line centre-to-centre distance varied from 2 to 5 diameters whilst the cross-flow distance from 0 to 2 diameters. The nominal Reynolds numbers were in the sub-critical regime and ranged from 1.12 × 10⁴ to 5.52 × 10⁴, and the nominal reduced velocities from 1.78 to 8.77. The damping ratio of the test set-up is low at 0.003 which gives a combined mass-damping parameter of 0.0046. Both the cylinders were free to respond in both the in-line and the cross-flow directions. The cylinder motion was measured simultaneously with the hydrodynamic loading in the two directions. It was found that the motion trajectories of the downstream cylinder show qualitative difference depending upon whether it is in tandem with the upstream cylinder or in the wake with a transverse offset. The VIV response of the downstream cylinder is dependent upon the reduced velocity of the upstream cylinder and its own reduced velocity based upon the actual mean wake velocity. The drag amplification of the downstream cylinder in the wake appears to be fundamentally different from that of a single VIV cylinder in isolation. Furthermore, unlike the two fixed cylinders in cross flow, the downstream cylinder undergoing VIV no longer experiences a marked non-zero mean lift. The upstream cylinder is largely unaffected by the downstream cylinder when the initial spacing is greater than 3 diameters. On the other hand, the motion response of and the fluid loading on the downstream cylinder are strongly influenced by the upstream cylinder in the spacing range tested.     

An Experimental Study on Dynamics Features of Three Side-by-Side Flexible Risers Undergoing Vortex-Induced Vibrations in A Uniform Flow

A vortex-induced vibration(VIV) experiment on three side-by-side risers subjected to a uniform flow was carried out in a combined wave-current flume. The dynamic features of interference effect on three side-by-side risers were investigated by varying fluid velocity and inter-riser spacing. The distributions of dimensionless displacement,dominant frequency, and displacement trajectory of the model risers were measured using mode decomposition and wavelet transform techniques. The coupled interference of inter-riser fluid to adjacent risers at different spacings was disclosed by introducing the "interference ratio" concept. The results show that at spacings smaller than 6.0 D, the three model risers display appreciable deviations in their displacement responses in cross-flow or in-line direction,attributable to the strong proximity disturbance and wake interference between the risers. When the spacing is increased to 8.0 D, wake interference still makes great difference to the dynamic response of the risers in both directions. As reduced velocity increases, the three risers show higher agreement with an isolated riser in overall dominant vibration frequency in CF direction than that in IL direction at all spacings and the side risers, although symmetrically placed, do not vibrate symmetrically, as a result of the steady deflection of clearance flow within the riser group. Interference effect results in a remarkable unsteady mode competition within the risers; quantitation of the interference levels for the three risers at different spacings with interference ratio revealed that under low flow velocities and large spacing ratios, clearance flow constitutes a non-neglectable interferer for three side-by-side risers.     

Simplified Prediction Model for Vortex-Induced Vibrations of Top Tensioned Risers

According to the characteristics of deepwater top tensioned risers, a simplified model is presented to predict the multi-modal response of vortex-induced vibration （VIV） in non-uniform flow based on energy equilibrium theory and the exporimental data from VIV self-excited and forced oscillations of rigid cylinders. The response amplitude of each mode is determined by a balance between the energy fed into the riser over the lock-in regions and the energy dissipated by the fluid damping over the remainders. Compared with the previous prediction models, this method can take fully account of the intrinsic nature of VIV for low mass ratio structures on lock-in regions, added mass and nonlinear fluid damping effect, etc. Moreover, it is the first time to propose the accurate calculating procedure for VIV amplitude correction factor by solving energy equilibrium equation and a closed form solution is presented for the case of a riser of uniform mass and cross-section oscillating in a uniform flow. The predicted values show a reasonable agreement with VIV experiments of riser models in stepped and sheared currents.     

Vortex-Induced Vibrations of A Long Flexible Cylinder in Linear and Exponential Shear Flows

A numerical study based on a wake oscillator model was conducted to determine the response performance of vortex-induced vibration(VIV) on a long flexible cylinder with pinned-pinned boundary conditions subjected to linear and exponential shear flows. The coupling equations of a structural vibration model and wake oscillator model were solved using a standard central finite difference method of the second order. The VIV response characteristics including the structural displacement, structural frequency, structural wavenumber, standing wave behavior,travelling wave behavior, structural velocity, lift force coefficient and transferred energy from the fluid to the structure with different flow profiles were compared. The numerical results show that the VIV displacement is a combination of standing waves and travelling waves. For linear shear flow, standing waves and travelling waves dominate the VIV response within the low-velocity and high-velocity zones, respectively. The negative values of the transferred energy only occur within the low-velocity zone. However, for exponential shear flow, travelling waves dominate the VIV response and the negative energy occurs along the entire length of the cylinder.