Environmental contamination of Zn,Cd, Ni,Cu, and Pb from industrial areas in Hamadan Province,western Iran

Eleven surface soil samples from calcareous soils of industrial areas in Hamadan Province, western Iran were analyzed for total concentrations of Zn, Cd, Ni, Cu and Pb and were sequentially extracted into six fractions to determine the bioavailability of various heavy metal forms. Total Zn, Cd, Ni, Cu and Pb concentrations of the contaminated soils were 658 (57–5,803), 125.8 (1.18–1,361), 45.6 (30.7–64.4), 29.7 (11.7–83.5) and 2,419 (66–24,850) mg kg⁻¹, respectively. The soils were polluted with Zn, Pb, and Cu to some extent and heavily polluted with Cd. Nickel values were not above regulatory limits. Copper existed in soil mainly in residual (RES) and organic (OM) fractions (about 42 and 33%, respectively), whereas Zn occurred essentially as RES fraction (about 69%). The considerable presence of Cd (30.8%) and Pb (39%) in the CARB fraction suggests these elements have high potential biavailability and leachability in soils from contaminated soils. The mobile and bioavailable (EXCH and CARB) fractions of Zn, Cd, Ni, Cu, and Pb in contaminated soils averaged (7.3, 40.4, 16, 12.9 and 40.8%), respectively, which suggests that the mobility and bioavailability of the five metals probably decline in the following order: Cd = Pb > Ni > Cu > Zn.     

Exploring Cd,Cu, Pb,and Zn dynamic speciation in mining and smelting-contaminated soils with stable isotopic exchange kinetics

The exchange kinetics of Cd, Cu, Pb, and Zn in seven mining and smelting-contaminated soils and the other two anthropogenically contaminated soils was investigated by using multi-elementary stable isotopic exchange kinetic (SIEK) method, and the experimental results were successfully interpreted by modelling using a sum of pseudo first order kinetics equations. SIEK results show that in the studied soils the isotopic exchange of Cd is a relatively fast process, and the exchange almost reaches an apparent plateau after 3-d equilibration; whereas for Cu, Pb, and Zn, the exchange is more sluggish, suggesting that it is important to understand the time-dependent metal mobility for risk assessment and management of contaminated soils. In most of the soils, the total isotopically exchangeable pool is divided, for all the metals, into two distinct pools: a fast exchangeable pool (E₁) with a kinetic rate constant k₁ having values around 1 min⁻¹ and a much slower exchangeable pool (E₂) with k₂ ranging from 0.0001 min⁻¹ to 0.001 min⁻¹. The distribution of the two exchangeable pools varies significantly among metals. The amount of isotopically exchangeable Cd related to the fast pool is dominant, accounting for on average 60% of total isotopically exchangeable pool in the soils; whereas this pool is smaller for Cu, Zn, and Pb. The sequence of average k₁ values is Cd > Pb ≈ Zn > Cu, consistent with the reported sequence of stability constants of metal-humic substances (HS) complexes while the average k₂ values follow the order: Cd > Pb > Cu > Zn, probably controlled by the slow desorption of metal ions associated with soil organic matter (SOM) fraction. Our results imply that further study on the exchange kinetics of metals on each individual sorption surface in soils, especially SOM, is critical to help understanding the overall exchange kinetics of heavy metals in whole soils.     

Copper desorption kinetics in wheat (Triticum aestivum L.) rhizosphere in some sewage sludge amended soils

Rhizosphere has different chemical and biological properties from bulk soils. Information about copper (Cu) desorption characteristics in the rhizosphere soils is limited. The objectives of this study were to determine Cu desorption characteristics and the correlation of its parameters with Cu extracted by DTPA-TEA, AB-DTPA and Mehlich 3 in bulk and rhizosphere amended soils with sewage sludge (10 g of sewage sludge was added to 1 kg soil) under greenhouse conditions in a rhizobox. The kinetics of Cu desorption in the rhizosphere and bulk was determined by successive extraction with DTPA-TEA in a period of 1 to 504 h at 25 ± 1 °C. The results showed that Cu extracted using several chemical extractants in the rhizosphere were significantly (P < 0.05) lower than in the bulk amended soils. In addition, Cu extracted using successive extraction in the rhizosphere were significantly (P < 0.01) lower than in the bulk soils. The best model for describing extraction data for the bulk and rhizosphere soils was the parabolic diffusion equation. Desorption kinetics of Cu conformed fairly well to first order and power function models. The results indicated that Cu diffusion rate in the wheat rhizosphere soils lower than in the bulk soils. Cu desorption rate in parabolic diffusion ranged from 0.326 to 0.580 mg kg^?1 h^?1/2 in the bulk soils, while it ranged from 0.282 to 0.490 mg kg^?1 h^?1/2 in the rhizosphere soils. Significant correlation (P < 0.05) between determine R values of parabolic diffusion and Cu desorption during 504 h with extracted Cu using DTPA-TEA, AB-DTPA and Mehlich 3 were found in the bulk and the rhizosphere soils. The results of this research revealed that Cu desorption characteristics in the wheat rhizosphere soils are quite different from bulk soils amended with sewage sludge.     

Evaluation of phosphorus leaching from contaminated calcareous soils due to the application of sheep manure and ethylenediamine tetraacetic acid

Organic amendment application to heavy metal contaminated soils may contribute to leaching of phosphorus (P). The objectives of this study were to determine the influence of sheep manure and ethylenediamine tetraacetic acid (EDTA) on the P leaching from a wide range of calcareous contaminated soils. Glass tubes, 4.9 cm diameter, and 40 cm long, were packed with contaminated soil. The resulting 20 cm long column of soils had bulk density of 1.3–1.4 g cm⁻³. The columns were leached with distilled water, 0.01 M EDTA, 0.01 M CaCl₂ or sheep manure extract (SME) solutions. The breakthrough curves for P were different and the amounts of P leached varied considerably between different soils and leaching solutions. The amounts leached with SME were less than the amount added through the SME, indicating that some P was retained by the soil, mainly due to preliminary sorption of organic ligands on to the soil with the creation of new sorbing surfaces. The amount leached with EDTA solution varied from 9.9 to 46.3% of the extractable P when 15 pore volumes had passed through the column. Low amounts of P were leached by 0.01 M CaCl₂, which is likely to be due to the high concentration of soluble Ca used in the solution. Thus, among leaching solutions the application of EDTA and SME on contaminated calcareous soils might enhance the mobility of P and large amounts of P will be leached, leading to contamination of ground and surface waters.     

Stable Cu and Zn isotope ratios as tracers of sources and transport of Cu and Zn in contaminated soil

Copper and Zn metals are produced in large quantities for different applications. During Cu production, large amounts of Cu and Zn can be released to the environment. Therefore, the surroundings of Cu smelters are frequently metal-polluted. We determined Cu and Zn concentrations and Cu and Zn stable isotope ratios (δ⁶⁵Cu, δ⁶⁶Zn) in three soils at distances of 1.1, 3.8, and 5.3 km from a Slovak Cu smelter and in smelter wastes (slag, sludge, ash) to trace sources and transport of Cu and Zn in soils. Stable isotope ratios were measured by multicollector inductively coupled plasma mass spectrometry (MC-ICP-MS) in total digests. Soils were heavily contaminated with concentrations up to 8087 μg g⁻¹ Cu and 2084 μg g⁻¹ Zn in the organic horizons. The δ⁶⁵Cu values varied little (−0.12‰ to 0.36‰) in soils and most wastes and therefore no source identification was possible. In soils, Cu became isotopically lighter with increasing depth down to 0.4 m, likely because of equilibrium reactions between dissolved and adsorbed Cu species during transport of smelter-derived Cu through the soil. The δ⁶⁶Zn_IRMM values were isotopically lighter in ash (−0.41‰) and organic horizons (−0.85‰ to −0.47‰) than in bedrock (−0.28‰) and slag (0.18‰) likely mainly because of kinetic fractionation during evaporation and thus allowed for separation of smelter-Zn from native Zn in soil. In particular in the organic horizons large variations in δ⁶⁶Zn values occur, probably caused by biogeochemical fractionation in the soil-plant system. In the mineral horizons, Zn isotopes showed only minor shifts to heavier δ⁶⁶Zn values with depth mainly because of the mixing of smelter-derived Zn and native Zn in the soils. In contrast to Cu, Zn isotope fractionation between dissolved and adsorbed species was probably only a minor driver in producing the observed variations in δ⁶⁶Zn values. Our results demonstrate that metal stable isotope ratios may serve as tracer of sources, vertical dislocation, and biogeochemical behavior in contaminated soil.     

A comparative study of the effect of desferrioxamine B, oxalic acid, and Na-alginate on the desorption of U(VI) from goethite at pH 6 and 25 °C

Organic ligands affect the sorption and mobility of radionuclides in soils. Batch desorption experiments on goethite particles reveal the extent of uranyl desorption and hence bioavailability with different organic acids. The desorptive strength increases in the following order: background electrolyte < Na-alginate < desferrioxamine B (DFO-B) < oxalate. The sequence is consistent with decreasing molecular size and mass from alginate via DFO-B to oxalate. The concomitant Fe release in the desorption experiments indicates that desorption from goethite and not dissolution of goethite governs the mobility of adsorbed U(VI). A compilation of DFO-B surface excesses on goethite from our experiments together with literature values indicate that DFO-B adsorbs at a constant ∼3% to the goethite surface. It is surprising that such a small fraction suffices to account for the considerable uranyl desorption and thus remobilization of a radionuclide into solution. Oxalate displays higher surface concentrations but still lower than the determined uranyl surface excess. It follows that based on the high U(VI) stability constants, both organic ligands induce the desorption of uranyl species by increasing the chemical affinity of the aqueous phase. In the case of alginate, desorption of uranyl is weak and adsorbed alginate hampers any considerable detachment of U(VI) in the presence of the more potent ligands, DFO-B and oxalate. This inhibition is based on biosorption and in this respect polysaccharides in soils may retard and even halt the advance of actinides through the soil column. This hypothesis calls for further studies into the interaction of siderophores and polysaccharides with soil adsorbents and their role in the mobilization of contaminant metals.     

Soil heavy-metal speciation and wheat phytotoxicity in the vicinity of an abandoned lead–zinc mine in Shangyu City,eastern China

Sixteen soil samples were collected from the vicinity of an abandoned lead–zinc mine in Shangyu City, eastern China, and the heavy-metal speciation and wheat phytotoxicity in the soils were studied. The results showed that the concentrations of free Cu²⁺, Zn²⁺, Cd²⁺ and Pb²⁺ were highly variable and ranged from <0.01 to 0.32, 0.06 to 10.62, <0.01 to 1.40 and 0.02 to 37.10 μmol l⁻¹, respectively. The concentrations of soluble Cu, Zn, Cd and Pb ranged from 0.38 to 3.24, 0.72 to 78.74, <0.01 to 1.95 and 0.15 to 639.34 μmol l⁻¹, respectively. The general trend of mean solid/liquid partition coefficient and percentage of free metal ion to total soluble metal concentration were Cu > Pb > Zn > Cd and Cd > Zn > Cu > Pb, respectively. Stepwise multiple linear regression with pH, log(total metal) and log(organic matter) showed that log(total metal) was an important factor that controlled log(free metal ion) and log(soluble metal). Of the variability in log(free Cu²⁺), log(free Cd²⁺) and log(free Pb²⁺), 55.2, 58.6 and 64.3% could be explained by log(total Cu), log(total Cd) and log(total Pb) alone, respectively. Of the variability in log(soluble Cu) and log(soluble Cd), 77.1 and 72.5% could be explained by log(total Cu) and log(total Cd) alone, respectively. Wheat root length was controlled by the various metals with different free and soluble concentrations, and 99.2% of the variability in root length could be explained by concentrations of free and soluble Pb, soluble Cu and total Zn in the soils.     

Contamination and potential mobility assessment of heavy metals in urban soils of Hangzhou,China: relationship with different land uses

Concentration and distribution of heavy metals (Cd, Cu, Pb and Zn) in urban soils of Hangzhou, China, were measured based on different land uses. The contamination degree of heavy metals was assessed on the basis of pollution index (PI), integrated pollution index (IPI) and geoaccumulation index (I _geo). The 0.1 mol l⁻¹ HCl extraction procedure and gastric juice simulation test (GJST) were used to evaluate the potential mobility and environmental risk of heavy metals in urban soils. The average concentration of Cd, Cu, Pb and Zn in urban soils was measured at 1.2 (with a range of 0.7–4.6), 52.0 (7.4–177.3), 88.2 (15.0–492.1) and 206.9 (19.3–1,249.2) mg kg⁻¹, respectively. The degree of contamination increased in the order of industrial area (IA) > roadside (RS) > residential and commercial areas (RC) > public park and green areas (PG). The PIs for heavy metals indicated that there is a considerable Cd, Cu, Pb and Zn pollution, which originate from traffic and industrial activities. The IPI of these four metals ranged from 1.6 to 11.8 with a mean of 3.5, with the highest IPI in the industrial area. The assessment results of I _geo also supported that urban soil were moderately contaminated with Cd and to a lesser extent also with Cu, Pb and Zn. The IP and I _geo values reveal the pollution degree of heavy metal was the order of Cd > Pb > Zn ≈ Cu. It was shown that mobility and bioavailability of the heavy metals in urban soils increased in the order of Cd > Cu > Zn ≈ Pb. Owing to high mobility of Cd and Cu in the urban soils, further investigations are needed to understand their effect on the urban environment and human health. It is concluded that industrial activities and emissions from vehicles may be the major source of heavy metals in urban contamination. Results of this study present a rough guide about the distribution and potential environmental and health risk of heavy metals in the urban soils.     

Distribution and sorption of potentially toxic metals in four forest soils from Hungary

Metals of natural and anthropogenic origin behave differently in soils mostly due to their different mobility. In this study, sequential extractions and batch sorption experiments were performed to relate the fractionation of native Ni, Cu, Zn and Pb to the sorption properties of added metals in four soils with contrasting physiochemical characteristics. A significant effect due to sample composition on both the mobility and sorption characteristics of these metals was found. The efficiency of soil components in metal immobilization was in the order of carbonate > organic matter > swelling clay minerals. The partitioning of native metals together with the information gained through the sorption isotherms allows a deeper insight on the fate and behavior of metals in soils with various compositions.     

Effects of Soil Composition on Zn Speciation in Drainage Waters from Agricultural Soils

The influence of Zn speciation on Zn transport by drainage from different soils to surface water is examined in a stream catchment in an agricultural area. Drainage waters were collected from two types of soils, a mineral soil (MS) and a soil rich in organic matter (OS) by means of artificial drainage pipes. The speciation of dissolved Zn in the stream and the drainage waters was determined using ligand-exchange and voltammetry. About 50–95% of dissolved Zn is bound in strong complexes, and the free Zn²⁺ ion concentration is in the range of 1–16% of dissolved Zn. A substantial part of Zn is present in weaker organic or inorganic complexes. The simulated Zn speciation using the WHAM VI model is compared to the determined speciation. Free Zn²⁺ concentrations predicted by the WHAM VI model are generally higher than the analytically determined free Zn²⁺, but are mostly within the same order of magnitude. Effects of different soil organic matter content on Zn speciation and transport are discussed. Zn speciation in the drainage at the OS site is influenced by the distribution of organic matter between the solid and solution phase. The abundant organic Zn complexes in solution contribute to facilitate Zn transport from soil into surface waters, through the drainage at the OS site. Drainage from the OS site contributes about twice as much Zn input to the receiving water as the MS soil, as related to specific area. The mineral soil contains much lower organic matter, and a part of Zn bound with inorganic phases can hardly be released by dissolved organic ligands, leading to much higher Zn retention at the MS site.     

Pollution assessment and source apportionment of arsenic,lead and copper in selected soils of Khuzestan Province,southwestern Iran

Due to the intensified industrial activities and excessive application of agrochemicals and organic waste materials over the last few decades, there is a great concern about the accumulation of potentially toxic elements (PTEs) in soils from north of Khuzestan Province, southwestern Iran. Therefore, a comparative study with a total number of 300 composite soil samples (0–10 cm) from industrial, urban, agricultural, forest, and rangelands; and 26 samples from the major types of soils parent materials was conducted to examine sources, pollution status, and the effects of soil properties, land use types, and the local lithology on the total concentrations of As, Pb, and Cu (measured using atomic absorption spectrometer (AAS) equipped with graphite furnace) in the soils studied. The mean values of Pb and Cu were 12.2?±?4.6 and 13.5?±?7.6 mg kg^?1, respectively, slightly higher than the background values of the study area, but lower than the guideline values of Iranian Environmental Quality Standard for Soils. However, the mean values of As (1.72?±?1.15 mg kg^?1) were lower than both background values and the guideline values of Iranian Environmental Quality Standard for soils. The greatest values of the geo-accumulation index (I _geo), enrichment factor (EF), and the concentrations of Pb, Cu, and As were arranged as industrial > urban > agriculture > rangelands = forest land uses. The results also indicated that concentrations of all PTEs were greater in soils as compared to those in parent materials. Using principal component analysis (PCA), the origin of Cu and Pb with moderate to high enrichments was attributed to the inputs from both natural and anthropogenic sources. However, As was found to be mainly influenced by lithogenic origin.     

A laboratory batch study on arsenic sorption and desorption on guava orchard soils of Baruipur,West Bengal,India

Groundwater contaminated with arsenic (As), when extensively used for irrigation, causes potentially long term detrimental effects to surface soils. Such contamination can also directly affect human health when irrigated crops, such as rice, vegetable and fruits, are used for human consumption. Therefore, an understanding of the sorption and desorption behavior of As in surface soils is of high importance, because these processes regulate the bioavailability of As in the soil environment. In this study, we have collected soils from guava orchards of Baruipur, West Bengal, and characterized soil chemistry and batch sorption and desorption behavior in the laboratory. The sorption and desorption behavior of As in the soils were examined using the Langmuir and Freundlich sorption equation. Regression analysis of the soil chemical characteristics and sorption equation parameters were also performed. The results suggest that the sorption behavior of arsenate is highly dependent on soil characteristics, specifically organic carbon, clay and Al₂O₃ content of the soils. Whereas desorption behavior is critically influenced by the presence of high concentrations of amorphous and/or crystalline Fe₂O₃ in the soils. Retention of the significant portion of As in the soils (~ 84% of the total) suggests that As in the orchard soils may not be highly bioavailable to plants for uptake. However, more detailed studies will be required to ascertain the role of individual soil components on the As sorption and desorption processes.     

Trace elements contamination of agricultural soils affected by sulphide exploitation (Iberian Pyrite Belt,Sw Spain)

Agricultural soils of the Riotinto mining area (Iberian Pyrite Belt) have been studied to assess the degree of pollution by trace elements as a consequence of the extraction and treatment of sulphides. Fifteen soil samples were collected and analysed by ICP-OES and INAA for 51 elements. Chemical analyses showed an As–Cu–Pb–Zn association related with the mineralisation of the Iberian Pyrite Belt. Concentrations were 19–994 mg kg⁻¹ for As, 41–4,890 mg kg⁻¹ for Pb, 95–897 mg kg⁻¹ for Zn and of 27–1,160 mg kg⁻¹ for Cu. Most of the samples displayed concentrations of these elements higher than the 90th percentile of the corresponding geological dominium, which suggests an anthropogenic input besides the bedrock influence. Samples collected from sediments were more contaminated than leptosols because they were polluted by leachates or by mining spills coming from the waste rock piles. The weathering of the bedrock is responsible for high concentrations in Co, Cr and Ni, but an anthropogenic input, such as wind-blown dust, seems to be indicative of the high content of As, Cu, Pb and Zn in leptosols. The metal partitioning patterns show that most trace elements are associated with Fe amorphous oxy-hydroxides, or take part of the residual fraction. According to the results obtained, the following mobility sequence is proposed for major and minor elements: Mn, Pb, Cd, > Zn, Cu > Ni > As > Fe > Cr. The high mobility of Pb, Cu and Zn involve an environmental risk in this area, even in soils where the concentrations are not so high.     

Kinetics of the selective extraction of iron oxides in geochemical samples. Association between Fe and Cu in acid brown soils

The use of Tamm's reagent at 60°C and at different reaction times enables the progressive dissolution of iron oxides from the different horizons of acid brown soils. This technique is used to evaluate the association between Cu and Fe in soils from a zone mineralized in Cu. This association is quantified by the coefficient α (moles Cu/moles Fe) which represents the degree of doping of the iron oxides by Cu. For the B horizon of these soils, α values range from 5 to 10 × 10^-3 mole Cu/mole Fe.Calculation of the coefficient α (range = 0.4 to 2.0 × 10^-3) for 150 soil samples of the same type enabled the differentiation of two geochemical populations. Treatment of the total Cu values of these samples did not permit such differentiation.     

Assessment of heavy metal accumulation in macrophyte, agricultural soil, and crop plants adjacent to discharge zone of sponge iron factory

The present study deals with the characterization of effluent released from sponge iron industries and distribution of heavy metals in soil and macrophytes near to effluent discharge channel. Apart from this, accumulation of heavy metals in nearby soil and vegetation system irrigated with effluent-contaminated water is also the subject of this study. Physico-chemical analysis of effluent reveals that the concentration of total suspended solids (TSS), total hardness (TH), iron (Fe²⁺), and oil and grease are greater than the IS (1981) norms for discharge of water into inland water body. The soil along the sides of the effluent channel also shows higher concentration of heavy metals than the background soil. The enrichment of the heavy metals are in the order of Chromium (Cr) > Iron (Fe) > Manganese (Mn) > Zinc (Zn) > Copper (Cu) > Cadmium (Cd). Macrophytes growing along the sides of the effluent channel also show significant accumulation of heavy metals almost in the same order as accumulated in soil. Higher uptake of heavy metals by these varieties reveals that these species can be used for future phytoremediation. The effluent as well as contaminated water is extensively used for irrigation for growing vegetables like tomato (Lycopersicon esculatum) in the surrounding areas. Heavy metal accumulation in this agricultural soil are in the sequence of Cr > Fe > Mn > Zn > Cu > Cd. More or less similar type of accumulation pattern are also found in tomato plants except Fe and Zn exceeding Cr and Mn. Transfer Factor of heavy metals from soil to tomato plants (TF_S) shows average value of <1, suggesting less uptake of heavy metals from soil. Among the plant parts studied, fruit shows least accumulation. Although tomato plants show some phenotypic changes, the survival of tomato plants as well as least accumulation of metals in fruit reveals their tolerance to heavy metals. Therefore it may be suggested that this plant can be grown successfully in the heavy metal contaminated soil. Further research work on in situ toxicity test will be necessary in order to identify the most resistive variety on this particular type of contaminated site.     

Assessment of the selected trace metals in relation to long-term agricultural practices and landscape properties

Understanding of the landscape response to agricultural practices mainly in relation to soil trace metals requires particular attention. Consistent with this, the trend and possible pollution of total and DTPA fraction of Mn, Zn, Cu, and Cd in the agricultural soils developed on different landscape positions involving piedmont alluvial plain (PAP), river alluvial plain (RAP), plateau (PL), and lowland (LL) were investigated. The content of the metal in different soil profiles, grouped by landscape positions, varied in the following orders: total and DTPA-Mn as LL > PAP > RAP > PL, total Zn and Cu as PAP > RAP > LL > PL, total Cd as RAP > PAP > PL > LL, DTPA-Zn as RAP > PAP > PL > LL, and DTPA-Cu as RAP > LL > PL > PAP. A wide variation in the total fraction of Mn (89–985 mg kg^?1), Zn (24–152 mg kg^?1), Cu (8–27 mg kg^?1), and Cd (0.6–1.7 mg kg^?1) and in the DTPA fraction of Mn (1.2–11 mg kg^?1), Zn (0.3–4.4 mg kg^?1), Cu (0.3–3 mg kg^?1), Cd (0.03–0.09 mg kg^?1) observed as a result of the effects of agricultural practices and landscape properties. The values of both total and DTPA-extractable Mn, Zn, and Cu were enriched in the AP horizon probably due to anthropogenic activities particularly successive use of agrochemical compounds and manure during numerous years. Using soil pollution indices [single pollution (PI) and comprehensive pollution (PIN)], the study soils were categorized mainly as low to moderate pollution and Zn was identified as the major element affecting on the yield of these indices.     

江汉平原旱地和水田土壤镉的吸附与解吸特征及影响因素

为揭示旱地和水田土壤镉的吸附解吸特征,以江汉平原黄豆地、棉花地以及水稻田土壤为研究对象,开展土壤镉的吸附动力学实验、等温吸附?解吸实验以及有机质的影响实验.结果表明:江汉平原土壤对镉的吸附是一个较为复杂的吸附动力学过程且以化学吸附为主,研究区土壤镉的初始吸附速率总体上表现为水田土壤大于旱地土壤;旱地土壤对Cd2+具有较...     

Evaluation of contaminants retention in soils from Viamão District, Rio Grande do Sul State, Brazil

Adsorption is one of the most significant processes in the mobility of soluble pollutants in soils. The aim of this work is to characterize and evaluate the adsorption capacity of soils from Viamão District, Brazil. The studied ions were lead_total, copper_total, sulfate, phosphate, and potassium. The soils were mapped by remote sensing and characterized by granulometrical and mineralogical techniques. The adsorption tests were made by the contact of soil samples with aqueous solutions. The soils adsorption capacity presented the following trend: Pb_total>Cu_total≈PO ₄ ³⁻ >K⁺ ≈SO ₄ ²⁺ . Adsorption in the soils is strongly influenced by clay content. The adsorption of phosphate, copper, and lead was accentuated by the presence of organic matter. Phosphate adsorption was controlled by oxides and organic matter. Both potassium and sulfate showed insignificant adsorption in the studied soils.