The analysis of rainfall-induced slope failures at Iva Valley area of Enugu State,Nigeria

This paper analyses the dominant mechanisms of slope failures and identifies potential obstacles to landslide-hazard reduction at the Iva Valley area, Enugu, Nigeria. The landscape is replete with landslide scars and gullies of varied sizes and the slope deposits comprise unconsolidated, friable sands inter-bedded with thin units of montmorillonitic claystone. Forty-three landslide events were identified in the study area with most being shallow, short run-out movements with slip-surface depth <2 m. The study found the landslides mainly occur in the beginning of rainy season characterized by short duration, high intensity rainfall. An integrated approach comprising field mapping, laboratory tests and numerical analyses reveals that the barren nature of the slopes prior to the outset of rainy season, high rainfall intensity, erosion, overgrazing, soil characteristics and the site’s unique lithologic sequence are the main causes of instability. Shearing tests under several conditions showed that the soils strongly strain-soften until low steady-state strength is achieved. A computer code, based on this strength reduction technique, used input parameters obtained from the field and laboratory studies to simulate a landslide with similar structure, travel distance and distribution area. It is noted that urbanization has gradually increased the vulnerability of the society’s poor to landslide hazards as they now erect unplanned residence (tents and blocks) on the slopes. This work is part of a regional study aimed at finding ways of protecting the vulnerable by generating data that could be used to build future landslide susceptibility map.     

The relationship between geology and rock weathering on the rock instability along Mugling–Narayanghat road corridor, Central Nepal Himalaya

The present study was conducted along the Mugling–Narayanghat road section and its surrounding region that is most affected by landslide and related mass-movement phenomena. The main rock types in the study area are limestone, dolomite, slate, phyllite, quartzite and amphibolites of Lesser Himalaya, sandstone, mudstone and conglomerates of Siwaliks and Holocene Deposits. Due to the important role of geology and rock weathering in the instabilities, an attempt has been made to understand the relationship between these phenomena. Consequently, landslides of the road section and its surrounding region have been assessed using remote sensing, Geographical information systems and multiple field visits. A landslide inventory map was prepared and comprising 275 landslides. Nine landslides representing the whole area were selected for detailed studies. Field surveys, integrated with laboratory tests, were used as the main criteria for determining the weathering zones in the landslide area. From the overall study, it is seen that large and complex landslides are related to deep rock weathering followed by the intervention of geological structures as faults, joints and fractures. Rotational types of landslides are observed in highly weathered rocks, where the dip direction of the foliation plane together with the rock weathering plays a principle role. Shallow landslides are developed in the slope covered by residual soil or colluviums. The rock is rather fresh below these covers. Some shallow landslides (rock topples) are related to the attitude of the foliation plane and are generally observed in fresh rocks. Debris slides and debris flows occur in colluviums or residual soil-covered slopes. In few instances, they are also related to the rock fall occurring at higher slopes. The materials from the rock fall are mixed with the colluviums and other materials lying on the slope downhill and flow as debris flow. Rock falls are mainly related to the joint pattern and the slope angle. They are found in less-weathered rocks. From all these, it is concluded that the rock weathering followed by geological structures has prominent role in the rock slope instability along Mugling–Narayanghat road section and its surrounding regions.     

ICL/IPL regional activities in West Africa

Landslides account for huge amount of property damage in virtually every part of the world. The 2011 Iva Valley debris flow in Enugu, Nigeria; the 2010 landslide in Bududa region, 275?km east of Kampala, Uganda; the 2010 debris avalanche in Benue state, Nigeria; the 2008 landslide in Congo; and the 2007 landslide in western Cameroon with a combined human death of over 4,000 remain a modern day illustration of the degree of threat to public safety catastrophic landslides symbolize. Landslides do not only destroy lives and resources, they also deface and devalue historical, cultural, and entertainment facilities critical to the survival of man. Taming their aggression and ruinous impacts, thereby rescuing the environment from potential crisis, should, in point of fact, become a priority. In West Africa, landslides cause losses worth several millions of dollars annually. Nigeria remains one of the most vulnerable places. In both the southern and northern divide of the country, there is a mix of sedimentary, igneous, and metamorphic rocks which provide a good basis for the application of geology to urban development and hazard zonation in Nigeria. Quite often, similar engineering geologic problems including landslides and rockfalls, foundation problems in montmorilonite-rich clayey soils and problems associated with abandoned mines have been observed in both divides. The ICL/IPL program attempts to evaluate the engineering geologic problems in these two zones and provide case histories as illustrations. Experience gained in one area may be applied regionally to tackle problems in any other area with similar geology.     

The role of weathering in the initiation and mobility of a rare complex avalanche at the Nigeria–Cameroon border,West Africa

A catastrophic rock debris avalanche on one of the highlands demarcating Cameroon and Nigeria, 3 days after a transient period of heavy rainfall in November 2010, killed two people and damaged economic trees, plants and farmlands. Detailed field investigation and sampling were undertaken by a team from the International Programme on Landslide to analyse the slope movement. The investigation was in two phases—5 days and then 7 months after the event to study the effect of alternating dry and rainy seasons on the geotechnical properties of the materials associated with the slope failures. It was also aimed at assessing the effect of time on the morphology of the slip plane as a new approach to understanding the development of potential failure planes and reactivated landslides. Available evidence showed that present failure planes form mini-deposition axes which may become future slip zones as they are still steep enough to accelerate instability. The research also traced the pattern of rock weathering and joints evolution in the area and found that the systematic weathering of feldspar in the basement aggravated slope instability by creating zones of weakness characterized by structures that aid fragmentation. Soils were thin (<1 m) in some slopes and deep (>2 m) in others and may represent the differential effect of weathering and erosion on the mountains which are important in analyzing the mechanism and mobility of the failed masses. Samples collected were subjected to various geotechnical laboratory tests such as unconsolidated undrained triaxial, consistency, particle size and permeability tests.     

Monitoring and early warning of the 2012 Preonzo catastrophic rockslope failure

In this paper, we describe the investigations and actions taken to reduce risk and prevent casualties from a catastrophic 210,000 m³ rockslope failure, which occurred near the village of Preonzo in the Swiss Alps on May 15, 2012. We describe the geological predisposition and displacement history before and during the accelerated creep stage as well as the development and operation of an efficient early warning system. The failure of May 15, 2012, occurred from a large and retrogressive instability in gneisses and amphibolites with a total volume of about 350,000 m³, which formed an alpine meadow 1250 m above the valley floor. About 140,000 m³ of unstable rock mass remained in place and might collapse partially or completely in the future. The instability showed clearly visible signs of movements along a tension crack since 1989 and accelerated creep with significant hydromechanical forcing since about 2006. Because the active rockslide at Preonzo threatened a large industrial facility and important transport routes located directly at the toe of the slope, an early warning system was installed in 2010. The thresholds for prealarm, general public alarm, and evacuation were derived from crack meter and total station monitoring data covering a period of about 10 years, supplemented with information from past failure events with similar predisposition. These thresholds were successfully applied to evacuate the industrial facility and to close important roads a few days before the catastrophic slope failure of May 15, 2012. The rock slope failure occurred in two events, exposing a compound rupture plane dipping 42° and generating deposits in the midslope portion with a travel angle of 39°. Three hours after the second rockslide, the fresh deposits became reactivated in a devastating debris avalanche that reached the foot of the slope but did not destroy any infrastructure. The final run-out distance of this combined rock collapse–debris avalanche corresponded to the predictions made in the year 2004.     

Does vertical seismic force play an important role for the failure mechanism of rock avalanches? A case study of rock avalanches triggered by the Wenchuan earthquake of May 12, 2008, Sichuan,China

The Wenchuan earthquake triggered 15,000 rock avalanches, rockfalls and debris flows, causing a large number of causalities and widespread damage. Similar to many rock avalanches, field investigations showed that tensile failure often occurred at the back edge. Some soil and rock masses were moved so violently that material became airborne. The investigation indicates that this phenomenon was due to the effect of a large vertical seismic motion that occurred in the meizoseismal area during the earthquake. This paper analyses the effect of vertical earthquake force on the failure mechanism of a large rock avalanche using the Donghekou rock avalanche as an example. This deadly avalanche, which killed 780 people, initiated at an altitude of 1,300 m and had a total run-out distance of 2,400 m. The slide mass is mainly composed of Sinian limestone and dolomite limestone, together with Cambrian slate and phyllite. Static and dynamic stability analysis on the Donghekou rock avalanche has been performed using FLAC finite difference method software, under the actual seismic wave conditions as recorded on May 12, 2008. The results show that the combined horizontal and vertical peak acceleration caused a higher reduction in slope stability factor than horizontal peak acceleration alone. In addition, a larger area of tensile failure at the back edge of the avalanche was generated when horizontal and vertical peak acceleration were combined than when only horizontal acceleration was considered. The force of the large vertical component of acceleration was the main reason rock and soil masses became airborne during the earthquake.     

Characteristics and numerical runout modelling of a catastrophic rock avalanche triggered by the Wenchuan earthquake in the Wenjia valley,Mianzhu, Sichuan,China

The 2008 Wenchuan earthquake triggered more than 100 rock avalanches with volumes greater than 10 million cubic metres. The rock avalanche with the longest runout amongst these destructive landslides occurred in the Wenjia valley, Mianzhu, Sichuan, China. The landslide involved the failure of about 27.5 million cubic metres of sandstone from the source area. The displaced material travelled about 4,170 m with an elevation descent of about 1,360 m, equivalent to a fahrböschung of 16.9° and covered an area of 1.5 million square metres, with the final deposited volume of approximately 49 million cubic metres. The catastrophic event destroyed the village of Yanjing, killed 48 people and buried some houses at the mouth of the Wenjia valley. On the basis of a detailed field investigation, we introduce basic characteristics of the rock avalanche and find that the rock avalanche resulted in two run-ups and a superelevation along the runout path, and downslope enlargement due to the entrainment of path materials. A numerical model (DAN3D) is used to simulate the post-failure behaviour of the rock avalanche. By means of trial and error, a combination of the frictional model and Voellmy model is found to provide the best performance in simulating this rock avalanche. The simulation results reveal that the rock avalanche had a duration of about 240 s and an average velocity of 17.4 m/s.     

The Cheam rock avalanche,Fraser Valley,British Columbia,Canada

The Cheam rock avalanche, which occurred about 5,000 years ago in the lower Fraser Valley, British Columbia, is the largest known catastrophic landslide in western Canada (175×10⁶ m³). A photo-draped digital elevation model of the rock avalanche reveals two morphologically distinct areas, an eastern area of arcuate hummocky ridges separated by flat-floored depressions and a lower western area with a subdued, gently rolling surface. Debris is up to 30 m thick and consists of rubbly, clast- and matrix-supported diamicton derived from local argillaceous metasedimentary rocks. Failure was probably caused by high pore water pressures on a thrust fault that daylights in the source area. Plastic deformation of sediment beneath the rock avalanche debris suggests that liquefaction occurred due to undrained loading when the debris struck the Cheam terrace. Liquefaction also explains the morphology and travel distance of the western debris lobe. The coincidence of well-sorted sands (the Popkum Series soil) with the rock avalanche debris indicates that significant amounts of water flowed over the surface of the landslide just after it came to rest. Stó:lõ Nation oral history suggests that the debris may have buried a village, causing the first known landslide fatalities in Canada.     

A geotechnical investigation of the retrogressive Yaka Landslide and the debris flow threatening the town of Yaka (Isparta,SW Turkey)

In this study the factors affecting the retrogressive Yaka Landslide, its mechanism and the hazard of debris flow on the town of Yaka are investigated. In the landslide area, the first landslide was small and occurred in March 2006 on the lower part of the Alaard?ç Slope near the Gelendost District town of Yaka (Isparta, SW Turkey). The second, the Yaka Landslide, was large and occurred on 19 February 2007 in the soil-like marl on the central part of Alaard?ç Slope. The geometry of the failure surface was circular and the depth of the failure surface was about 3 m. Following the landslide, a 85,800 m³ of displaced material transformed to a debris flow. Then, the debris flow moved down the Eglence Valley, traveling a total distance of about 750 m. The town of Yaka is located 1,600 m downstream of Eglence Creek and hence poses a considerable risk of debris flow, should the creek be temporarily dammed as a result of further mass movement. Material from the debris accumulation has been deposited on the base of Eglence Valley and has formed a debris-dam lake behind a debris dam. Trees, agricultural areas, and weirs in the Eglence Creek have seen serious damage resulting from the debris flow. The slope angle, slope aspect and elevation of the area in this study were generated using a GIS-based digital elevation model (DEM). The stability of the Alaard?ç Slope was assessed using limit equilibrium analysis with undrained peak and residual shear strength parameters. In the stability analyses, laboratory test results performed on the soil-like marls were used. It was determined that the Alaard?ç Slope is found to be stable under dry conditions and unstable under completely saturated conditions. The Alaard?ç Slope and its vicinity is a paleolandslide area, and there the factor of safety for sliding was found to be about 1.0 under saturated conditions. The Alaard?ç Slope and the deposited earthen materials in Eglence Creek could easily be triggered into movement by any factors or combination of factors, such as prolonged or heavy rainfall, snowmelt or an earthquake. It was established that the depth of the debris flow initiated on the Yaka Landslide reached up to 8 m in Eglence Creek at the point it is 20 m wide. If this deposited material in Eglence Creek is set into motion, the canal that passes through Yaka, with its respective width and depth of 7 and 1.45 m, could not possibly discharge the flow. The destruction or spillover of this canal in Yaka could bring catastrophic loss to residents which are located within 3–5 m of the bank of the canal. Furthermore, if material present in the landslide source area slides and this displaced material puts pressure on the unstable deposited material in Eglence Creek, even more catastrophic loss would occur to the town of Yaka. In this study, it was determined that debris flows are still a major hazard to Yaka and its population of 3,000. The results provided in this study could help citizens, planners, and engineers to reduce losses caused by existing and future landslides and debris flow in rainfall and snowmelt conditions by means of prevention and mitigation.     

Shallow-landslide susceptibility in the Costa Viola mountain ridge (southern Calabria,Italy) with considerations on the role of causal factors

The “Costa Viola” mountain ridge (southern Calabria), in the sector between Bagnara Calabra and Scilla, is particularly exposed to geo-hydrological risk conditions. The study area has repeatedly been affected by slope instability events in the last decades, mainly related to debris slides, rock falls and debris flows. These types of slope movements are among the most destructive and dangerous for people and infrastructures, and are characterized by abrupt onset and extremely rapid movements. Susceptibility evaluations to shallow landslides have been performed by only focusing on source activation. A logistic regression approach has been applied to estimating the presence/absence of sources in terms of probability, on the basis of linear statistical relationships with a set of territorial variables. An inventory map of 181 sources, obtained from interpretation of air photographs taken in 1954–1955, has been used as training set, and another map of 81 sources, extracted from 1990 to 1991 photographs, has been adopted for validation purposes. An initial set of 12 territorial variables (i.e. lithology, land use, soil sand percentage, elevation, slope angle, aspect, across-slope and down-slope curvatures, topographic wetness index, distance to road, distance to fault and index of daily rainfall) has been considered. The adopted regression procedure consists of the following steps: (1) parameterization of the independent variables, (2) sampling, (3) calibration, (4) application and (5) evaluation of the forecasting capability. The “best set” of variables could be identified by iteratively excluding one variable at a time, and comparing the ROC results. Through a sensitivity analysis, the role of the considered factors in predisposing shallow slope failures in the study area has been evaluated. The results obtained for the Costa Viola mountain ridge can be considered acceptable, as 98.1 % of the cells are correctly classified. According to the susceptibility map, the village of Scilla and its surroundings fall in the highest susceptibility class.     

A comparison of logistic regression-based models of susceptibility to landslides in western Colorado,USA

The Paonia-McClure Pass area of Colorado has been recognized as a region highly susceptible to mass movement. Because of the dynamic nature of this landscape, accurate methods are needed to predict susceptibility to movement of these slopes. The area was evaluated by coupling a geographic information system (GIS) with logistic regression methods to assess susceptibility to landslides. We mapped 735 shallow landslides in the area. Seventeen factors, as predictor variables of landslides, were mapped from aerial photographs, available public data archives, ETM + satellite data, published literature, and frequent field surveys. A logistic regression model was run using landslides as the dependent factor and landslide-causing factors as independent factors (covariates). Landslide data were sampled from the landslide masses, landslide scarps, center of mass of the landslides, and center of scarp of the landslides, and an equal amount of data were collected from areas void of discernible mass movement. Models of susceptibility to landslides for each sampling technique were developed first. Second, landslides were classified as debris flows, debris slides, rock slides, and soil slides and then models of susceptibility to landslides were created for each type of landslide. The prediction accuracies of each model were compared using the Receiver Operating Characteristic (ROC) curve technique. The model, using samples from landslide scarps, has the highest prediction accuracy (85 %), and the model, using samples from landslide mass centers, has the lowest prediction accuracy (83 %) among the models developed from the four techniques of data sampling. Likewise, the model developed for debris slides has the highest prediction accuracy (92 %), and the model developed for soil slides has the lowest prediction accuracy (83 %) among the four types of landslides. Furthermore, prediction from a model developed by combining the four models of the four types of landslides (86 %) is better than the prediction from a model developed by using all landslides together (85 %).     

Characteristics of landslides in western Colorado,USA

Mass movement can be activated by earthquakes, rapid snowmelt, or intense rainstorms in conjunction with gravity. Whereas mass movement plays a major role in the evolution of a hillslope by modifying slope morphology and transporting material from the slope to the valley, it is also a potential natural hazard. Determining the relationships of frequency and magnitude of landslides are fundamental to understanding the role of landslides in the study of landscape evolution, hazard assessment, and determination of the rate of hillslope denudation. We mapped 735 shallow and active landslides in the Paonia to McClure Pass area of western Colorado from aerial photographs and field surveys. The study area covers ～815 km². The frequency–magnitude relationships of the landslides illustrate the flux of debris by mass movement in the area. The comparison of the probability density of the landslides with the double Pareto curve, defined by power scaling for negative slope (α), power scaling for positive slope (β), and location of rollover (t), shows that α?=?1.1, β?=?1.9, and t?=?1,600 m² for areas of landslides and α?=?1.15, β?=?1.8, and t?=?1,900 m³ for volumes of landslides. The total area of landslides is 4.8?×?10⁶ m² and the total volume of the landslides is 1.4?×?10⁷ m³. The areas (A) and the volumes (V) of landslides are related by V?=?0.0254?×?A ^1.45. The frequency–magnitude analysis shows that landslides with areas ranging in size from 1,600 to 20,000 m² are the most hazardous landslides in the study area. These landslides are the most frequent and also do a significant amount of geomorphic work. We also developed a conceptual model of hillslope development to upland plateau driven by river incision, shallow landsliding, and deep-seated large landsliding. The gentle slope to flat upland plateau that dominated the Quaternary landscape of the study area was modified to the present steep and rugged topography by the combined action of fluvial incision and glacial processes in response to rock uplift, very-frequent shallow landsliding, and less-frequent deep-seated landsliding.     

Characteristics and numerical runout modeling of the heavy rainfall-induced catastrophic landslide–debris flow at Sanxicun,Dujiangyan, China,following the Wenchuan Ms 8.0 earthquake

The 2008 Ms 8.0 Wenchuan earthquake triggered a large number of extensive landslides. It also affected geologic properties of the mountains such that large-scale landslides followed the earthquake, resulting in the formation of a disaster chain. On 10 July 2013, a catastrophic landslide–debris flow suddenly occurred in the Dujiangyan area of Sichuan Province in southeast China. This caused the deaths of 166 people and the burying or damage of 11 buildings along the runout path. The landslide involved the failure of ≈1.47 million m³, and the displaced material from the source area was ≈0.3 million m³. This landslide displayed shear failure at a high level under the effects of a rainstorm, which impacted and scraped an accumulated layer underneath and a heavily weathered rock layer during the release of potential and kinetic energies. The landslide body entrained a large volume of surface residual diluvial soil, and then moved downstream along a gully to produce a debris flow disaster. This was determined to be a typical landslide–debris flow disaster type. The runout of displaced material had a horizontal extent of 1200 m and a vertical extent of 400 m. This was equivalent to the angle of reach (fahrböschung angle) of 19° and covered an area of 0.2 km². The background and motion of the landslide are described in this study. On the basis of the above analysis, dynamic simulation software (DAN3D) and rheological models were used to simulate the runout behavior of the displaced landslide materials in order to provide information for the hazard zonation of similar types of potential landslide–debris flows in southeast China following the Wenchuan earthquake. The simulation results of the Sanxicun landslide revealed that the frictional model had the best performance for the source area, while the Voellmy model was most suitable for the scraping and accumulation areas. The simulations estimated that the motion could last for ≈70 s, with a maximum speed of 47.7 m/s.     

How does the water–rock interaction of marly rocks affect its mechanical properties in the Three Gorges reservoir area,China?

Marly rock is a sensitive rock group of landslides in the Three Gorges reservoir area, China. It is composed predominantly of carbonate and clay minerals, water–rock interaction (WRI) of which could activate landslides in the reservoir area. To study the mechanism by which WRI affects the mechanical properties of marly rock, samples were collected from two boreholes (depth 301.78 and 307.14 m) and slope surface. Then, laboratory tests were designed to study the quantitative relationship between mineral contents and mechanical properties of intact rock, to analyze both change process of mineral composition and microstructure under short-term and long-term WRI. Finally, the change in mechanical properties and its effect on slope stability are suggested. This study indicates that the uniaxial compressive strength and Poisson ratio can be estimated by linear regression equations: (1) σ _c = 8.959 × (C/Q) ? 0.744 × CM + 58.516; (2) μ = 0.014 × (C/Q) ? 0.001 × CM + 0.234. The chemical reactions of WRI mainly included dissolution and ion exchange. On the slope surface, dissolution mainly acts on calcite, illite, dolomite, feldspar and other minerals dissolved in water. Underground, both chemical reactions of dissolution and ion exchange easily approach equilibrium with long-term seepage. Small-size minerals and micropores damage the stable microstructure of marly rock. These changes of minerals and microstructure can trigger shallow slope failure and develop deep creep deformation along some crash zones in the reservoir shoreline.     

The Todagin Creek landslide of October 3, 2006, Northwest British Columbia, Canada

The Todagin Creek landslide is located at 57.61° N 129.98° W in Northwest British Columbia. A seismic station 90 km north of the landslide recorded the event at 1643 hours coordinated universal time (UTC; 0943 hours Pacific daylight time (PDT)) on October 3, 2006. The signal verifies the discovery and relative time bounds provided by a hunting party in the valley. The landslide initiated as a translational rock slide on sedimentary rock dipping down slope at 34° and striking parallel to the valley. The landslide transformed into a debris avalanche and had a total volume estimated at 4 Mm³. An elevation drop of 771 m along a planar length of 1,885 m resulted in a travel angle (fahrb?schung) of 21.3°. The narrowest part of the landslide through the transport zone is 345 m. The widest part of the divergent toe of the landslide reaches a width of 1,010 m. Landslide debris impounded a lake of approximately 32 ha and destroyed an additional 67 ha of forest. The impoundment took 7 to 10 days to fill, with muddied waters observed downstream on October 13. No clear linkage exists with precipitation and temperature records preceding the landslide, but strong diurnal temperature cycles occurred in the days prior to the event. The Todagin Creek area appears to have an affinity for large landslides with the deposits of three other landslides >5 Mm³ observed in the valley.     

Long-traveling landslides in deep snow conditions induced by the 2011 Nagano Prefecture earthquake,Japan

Earthquakes in mountainous areas may produce many landslides that involve abundant snow, but few observations have been made of these hazardous phenomena. The 12 March 2011 north Nagano Prefecture earthquake (M_JMA 6.7) occurred in a mountainous part of Japan that typically has an annual snow cover of more than 2 m, and it induced many snowy landslides. Some of these traveled relatively long distances. We examined the snowy Tatsunokuchi landslide to reconstruct the landsliding processes over deep snow. We infer that the Tatsunokuchi landslide occurred by collapse of a rock debris mass of 5?×?10⁴ m³ that plunged into the abundant snow, forming a mixture of snow and rock debris, which then traveled on top of the snow. Later, the displaced mass included a large amount of snow which was pushed forward at the front and to the sides. The velocity of the landslide was estimated to be approximately 14 m/s. It appears that the displaced mass, having only a small proportion of rock debris, had a low enough density to travel easily on top of the snow. Our observations suggest that there was much liquid water at the base of the displaced mass shortly after the event. Our results suggest that landslides may damage wider areas than expected if they travel over deep snow.     

Landslides triggered by slipping-fault-generated earthquake on a plateau: an example of the 14 April 2010, Ms 7.1, Yushu, China earthquake

On 14 April 2010 at 07:49 (Beijing time), a catastrophic earthquake with Ms 7.1 struck Yushu County, Qinghai Province, China. A total of 2,036 landslides were interpreted from aerial photographs and satellite images, verified by selected field checking. These landslides cover about a total area of 1.194 km². The characteristics and failure mechanisms of these landslides are presented in this paper. The spatial distribution of the landslides is evidently strongly controlled by the locations of the main co-seismic surface fault ruptures. The landslides commonly occurred close together. Most of the landslides are small; there were only 275 individual landslide (13.5 % of the total number) surface areas larger than 1,000 m². The landslides are of various types. They are mainly shallow, disrupted landslides, but also include rock falls, deep-seated landslides, liquefaction-induced landslides, and compound landslides. Four types of factors are identified as contributing to failure along with the strong ground shaking: natural excavation of the toes of slopes, which mean erosion of the base of the slope, surface water infiltration into slopes, co-seismic fault slipping at landslide sites, and delayed occurrence of landslides due to snow melt or rainfall infiltration at sites where slopes were weakened by the co-seismic ground shaking. To analyze the spatial distribution of the landslides, the landslide area percentage (LAP) and landslide number density (LND) were compared with peak ground acceleration (PGA), distance from co-seismic main surface fault ruptures, elevation, slope gradient, slope aspect, and lithology. The results show landslide occurrence is strongly controlled by proximity to the main surface fault ruptures, with most landslides occurring within 2.5 km of such ruptures. There is no evident correlation between landslide occurrences and PGA. Both LAP and LND have strongly positive correlations with slope gradient, and additionally, sites at elevations between 3,800 and 4,000 m are relatively susceptible to landslide occurrence; as are slopes with northeast, east, and southeast slope aspects. Q₄ al-pl, N, and T₃ kn ¹ have more concentrated landslide activity than others. This paper provides a detailed inventory map of landslides triggered by the 2010 Yushu earthquake for future seismic landslide hazard analysis and also provides a study case of characteristics, failure mechanisms, and spatial distribution of landslides triggered by slipping-fault generated earthquake on a plateau.     

Landslides induced by the April 2007 Aysén Fjord earthquake, Chilean Patagonia

On the 21st of April 2007, the Aysén Fjord earthquake (Mw 6.2) in southern Chile (45.3° S, 73.0° W) triggered hundreds of landslides in the epicentral area along the fjord coast and surroundings. Some of these landslides induced large tsunami waves within the fjord causing fatalities and damaging several salmon farms, the most important economic activity of the area. The landslides included rock slides and avalanches, rock falls, shallow soil and soil–rock slides, and debris flows. The earthquake was the climax of a seismic swarm that began 3 months earlier. The seismicity is associated with tectonic activity along the Liquiñe–Ofqui fault zone (LOFZ), a major structural feature of the region. The earthquake-induced landslides were mapped and classified from field observations and remote sensing analysis. The landslide areas and epicentral distances are within the expected range for the earthquake magnitude according to worldwide data, while the position of landslides on the slopes strongly suggests topographic amplification effects in triggering the failures. The location of the landslides is also clearly related to some of the main fault branches of the LOFZ. The seismic event has configured a new situation of seismic and landslide hazard in the Aysén region and along the LOFZ, where the presence of towns and economic infrastructure along the coasts of several fjords constitutes a potential risk that was not considered before this seismic event.     

Geological Characteristics and Stability Evaluation of Wanjia Middle School Slope in Wenchuan Earthquake Area

To investigate the formation mechanism and the stability of Wanjia middle school slope in Wenchuan Earthquake Area, the macroscopic geological characteristics and the failure process of the landslide are researched by engineering geology analysis method, limit equilibrium method, and finit element method. The results show that after the Wenchuan Earthquake, retaining walls, houses and other infrastructure on the foot of Wanjia middle school slope were severely destroyed, 10 cm wide tension fracture appeared at the trailing edge of the slope. Wanjia middle school slope is a type of medium-sized soil landslide. The area of the deformation body is about 19,314 m², the total volume of the deformation body is about 23 × 10⁴ m³. There may be two potential sliding surfaces in the unstable slope: shallow and deep landslide. The analysis results of the limit equilibrium method and the finite element method show that: under dead weight, dead weight + rainstorm, dead weight + earthquake conditions, the plastic zone occurs mainly at the middle part or the trailing edge of the slope, and it doesn’t fully cut through the deep landslide body, so the deep landslide is stable. However, under rainstorm or earthquake conditions, the plastic zone almost completely cut thorough the shallow landslide body, it shows that the shallow landslide is in the understable–basic stable state. It is found that the results of finite element method is concordant with the results of the limit equilibrium method (F _s = 1.06–1.29, the shallow landslide is in the basic stable–stable state). The calculation results show that shallow landslides are likely to occur in Wanjia middle school slope during a rainstorm or an earthquake, so monitoring and control of the slope should be strengthened. The shallow landslide should be managed by some measures, such as anti slide pile retaining structures and drainage works, and the dangerous rock bodies on the slope surface should be cleaned up.     

An analysis of the supply process of loose materials to mountainous rivers and gullies as a result of dry debris avalanches

A dry debris avalanche will produce different volumes of colluviums or depositions (loose materials), which can have a significant impact on mountainous rivers or gullies. The loose material supply process caused by a debris avalanche is an important issue for understanding secondary disasters that form via the coupling of water flow and loose materials. Two flumes were designed for laboratory tests of the loose materials supply process to rivers/gullies, and the related impact factors were analyzed. Experimental results show that the supply of loose materials is a continuous process that directly relates to the avalanche’s mass movement processes. The sliding masses with smaller particle sizes are more sensitive to the flume slope and exhibited a longer supply time. The time-consuming for the debris avalanche travel in the flume decreased with the increasing particle size (such as flume B, time-consuming is decreased 0.2 s when the particle size increased from <1.0 to 20–60 mm), landslide volume and flume slope (flume A, consuming 1.6–2.1 s when flume slope is 29° decreased to consuming 1.3–1.5 s when flume slope is 41°), which means the increasing mobility of loose materials. The total supply time increased with the increasing landslide volume or decreasing particle size and flume slope. An empirical model for the process is presented based on numerous laboratory tests and numerical simulations, which can successfully describe the supply process for loose materials to a river/gully. The supply process of loose materials to mountainous gully from a dry debris avalanche is controlled by the material compositions of sliding masses, topographical conditions, landslide volume and bed friction, where large-volume debris avalanches that occur in mountainous river regions are more likely to obstruct the river flow and form a landslide-dammed lake.