Mineralogy,chalcopyrite ReOs geochronology and sulfur isotope of the Hujiayu Cu deposit in the Zhongtiao Mountains,North China Craton: Implications for a Paleoproterozoic metamorphogenic copper mineralization

The Hujiayu Cu deposit, located in the Zhongtiao Mountains district of southern North China Craton, is hosted by graphite schist and dolomitic marble with disseminated to veinlet (stage I) and thick vein (stage II) mineralization. Stage I mineralization, characterized by stratabound, disseminated pyrite and chalcopyrite within the graphite schist host rock, formed at the syn-metamorphic stage. Graphite geothermometry showed that the host rock was subjected to an upper-greenschist to lower amphibolite metamorphism at a temperature range of 486 to 596 °C, averaging of 546 ± 35 °C (1 σ, n = 19). Stage II mineralization, consisting of brecciated dolomitic thick veins cemented by quartz-sulfide assemblages, was a product of metamorphic hydrothermal activity. This thick vein was subdivided into an early hydrothermal dolomitic alteration composing of dolomitic breccia with some cobaltiferous pyrite (stage IIa) and a late siliceous-copper mineralization consisting of quartz-sulfide assemblages (stage IIb). A clausthalite–siegenite–sphalerite–chalcopyrite mineral assemblage was observed in stage IIb, constraining the sulfur fugacity and selenium fugacity within − 18.7 to − 11.7 and − 21.7 to − 14.7, respectively. It was inferred stage IIb was marked by a drop in sulfur fugacity and a substantial increase in selenium fugacity after the major chalcopyrite precipitation. Calculations based on the compositions of cobaliterous pyrite and sphalerite reveal that the mineral assemblage at stage IIa formed at an approximately temperature range of 400 to 300 °C, whereas the minerals in stage IIb occurred at temperature of 256 ± 9 °C (1 σ, n = 7). Sulfides from stage I have δ³⁴S value ranging from 10.1 to 22.2‰ with an average value of 16.9 ± 3.4‰ (1 σ, n = 27), supporting the model that sulfides precipitated through thermochemical reduction of sulfate at sedimentary stage followed by metamorphic homogenization of δ³⁴S isotopic signatures. Sulfides from the stage II have δ³⁴S values in highly variable ranging from 3.4 to 19.2‰, indicating a rather complex source. Four chalcopyrite samples yielded a weighted model age of 1952 ± 39 Ma (1 σ, MSWD = 1.5), suggesting that the copper mineralization formed synchronously with regional metamorphism (1970–1850 Ma) and hence a Paleoproterozoic metamorphogenic copper mineralization is implicated. Therefore, we envisaged disseminated-veinlet mineralization formed during a metamorphic peak and the major hydrothermal copper mineralization occurred during the retrograde cooling.     

Variation of copper isotopes in chalcopyrite from Dabu porphyry Cu-Mo deposit in Tibet and implications for mineral exploration

The study presents copper (Cu) isotope data of mineral separates of chalcopyrite from four drill core samples in the Miocene Dabu porphyry Cu-Mo deposit formed in a post-collisional setting in the Gangdese porphyry copper belt, southern Tibet. Copper isotope values in hypogene chalcopyrite range from –1.48‰ to +1.12‰, displaying a large variation of up to 2.60‰, which demonstrates Cu isotope fractionation at high-temperature during hydrothermal evolution. The majority of measured chalcopyrite isotopic compositions show a gradual increasing trend from –1.48‰ to +1.12‰ with the increase of drilling depth from 130m to 483m, as the alteration assemblages change from potassic to phyllic. Similarly, the other δ⁶⁵Cu values (δ⁶⁵Cu = ((⁶⁵Cu/⁶³Cu)_sample/(⁶⁵Cu/⁶³Cu)_standard − 1) × 1000) of the chalcopyrite show a gradual increasing trend from −1.48‰ to +0.59‰ with the decrease of drilling depth from 130 m to 57 m, as the alteration assemblages change from potassic, phyllic, through argillic to relatively fresh. These observations suggest a genetic link between Cu isotope variation and silicate alteration assemblages formed at different temperatures, indicative of a Rayleigh precipitation process resulting in the large variation of δ⁶⁵Cu values at Dabu. In general, samples closest to the center of hydrothermal system dominated by high-temperature potassic alteration are isotopically lighter, whereas samples dominated by low-temperature phyllic alteration peripheral to the center are isotopically heavier. The predicted flow pathways of hydrothermal fluids are from No. 0 to No. 3 exploration line, and the lightest δ⁶⁵Cu values are the most proximal to the hydrothermal source. Finally, we propose that the northwest side of the No. 0 exploration line has high potential for hosting undiscovered orebodies. The pattern of Cu isotope variation in conjunction with the features of silicate alteration in porphyry system can be used to trace the hydrothermal flow direction and to guide mineral exploration.     

S,O and Pb isotopic evidence on the origin of the İnkaya (Simav-Kütahya) Cu–Pb–Zn–(Ag) Prospect,NW Turkey

The İnkaya Cu–Pb–Zn–(Ag) prospect is a typical example of the hydrothermal mineralization occurring in the Menderes Massif, which crop out in Western Anatolia. The prospect located approximately 20 km west of Simav (Kütahya-Turkey) in northern part of the Menderes Massif have been characterized through the detailed examinations involving geological, mineralogical, whole-rock geochemistry, fluid inclusion, stable isotope and lead isotope.The İnkaya Cu–Pb–Zn–(Ag) prospect is located along an E–W-trending fault in the Cambrian Simav Metamorphics, which consist of quartz–muscovite schist, quartz–biotite schist, muscovite schist, biotite schist and the Arıkayası Formation, which is composed of marbles. Galena, sphalerite, chalcopyrite, pyrite and fahlore are the main minerals, and they are accompanied by small amounts of cerussite, anglesite, digenite, enargite, chalcocite, covellite, bornite, and Fe-oxides with gangue quartz. In addition to Pb, Zn, Cu, Ag, the ore samples contain substantial quantities of As, Cd and Bi and small amount of Au. Average contents of Cu, Pb, Zn and Ag are 77,400 ppm, 102,600 ppm, 6843 ppm and 203 ppm, respectively.The δ³⁴S values for galena, chalcopyrite and pyrite formed in the same stage vary in the range from − 1.7 to − 2.1‰ (average − 2.0), 0.1 to 0.3‰ (average 0.2) and − 1.5 to 2.6‰ (average + 1.5), respectively.δ³⁴S values for H₂S, representing the composition of the fluids responsible for the sulfide mineral formations and calculated from the δ³⁴S value are between − 2.77 and 1.33‰; it is consistent with the sulfur in sulfide minerals. δ¹⁸O_quartz values range from 11.3 to 16.4‰ and estimated δ¹⁸O_fluid values range from 5.4 to 10.6‰.Pyrite–galena and pyrite–chalcopyrite pairs calculated to determine equilibrium isotope temperatures based on δ³⁴S values are between 254.6 and 277.4 °C for pyrite–galena and 274.7 °C for pyrite–chalcopyrite. Sulfur and oxygen isotope values similar to the values for fluid equilibrated with an felsic magmatic source.Fluid inclusion studies on quartz of the same silicification stage coexisting with galena, sphalerite and chalcopyrite collected from the mineralized vein indicate that the temperature range of the fluids is 235 °C to 340 °C and that the salinities are 0.7 to 4.49 wt.% NaCl equivalent. The wide range of homogenization temperatures and relatively lower salinities of the fluid inclusions indicate that at least two different fluid generations were trapped in the quartz from only one fluid type. Also, lower salinities of fluid inclusion probably indicate mixing of meteoric water and magmatic fluid.The galena has ²⁰⁶Pb/²⁰⁴Pb values of 18.862–18.865, ²⁰⁷Pb/²⁰⁴Pb values of 15.707–15.711, and ²⁰⁸Pb/²⁰⁴Pb values of 39.033–39.042. The lead isotope values show a similarity with upper crustal values.     

Arsenate and antimonate adsorption competition on 6-line ferrihydrite monitored by infrared spectroscopy

Arsenate and antimonate are water-soluble toxic mining waste species which often occur together and can be sequestered with varying success by a hydrous ferric oxide known as ferrihydrite. The competitive adsorption of arsenate and antimonate to thin films of 6-line ferrihydrite has been investigated using primarily adsorption/desorption kinetics monitored by in situ attenuated total reflectance infrared (ATR-IR) spectroscopy on flowed solutions containing 10⁻³ and 10⁻⁵ mol L⁻¹ of both species at pH 3, 5, and 7. ICP-MS analysis of arsenate and antimonate adsorbed to 6-line ferrihydrite from 10⁻³ mol L⁻¹ mixtures in batch adsorption experiments at pH 3 and 7 was carried out to calibrate the relative surface concentrations giving rise to the IR spectral absorptions. The kinetic data from 10⁻³ and 10⁻⁵ mol L⁻¹ mixtures showed that at pH 3 antimonate achieved a greater surface concentration than arsenate after 60 min adsorption on 6-line ferrihydrite. However, at pH 7, the adsorbed arsenate surface concentration remained relatively high while that of adsorbed antimonate was much reduced compared with pH 3 conditions. Both species desorbed slowly into pH 3 solution while at pH 7 most adsorbed arsenate showed little desorption and adsorbed antimonate concentration was too low to register its desorption behaviour. The nature of arsenate which is almost irreversibly adsorbed to 6-line ferrihydrite remains to be clarified.     

Study of the surface properties of enargite as a function of pH

The surface properties of enargite as a function of pH were investigated. The zeta potential values increased from − 10 mV (pH = 3) to − 45 mV (pH = 12) and no isoelectric point (iep) was detected. The zeta potential of enargite was highly sensitive to pH and interesting peaks/valleys, unusual in common sulfide minerals, were observed. In the present study, these results were interpreted on the basis of the chemistry of enargite, which is a tetra-thioasenate of Cu(I). A thermodynamic approach, including the Eh–pH diagram for enargite, and the hydrolysis diagrams for arsenic, thioarsenic, and oxo-thioarsenic acids was employed. An interpretation based on the simultaneous ionization and dissociation reactions of the hydrolysis products of arsenic and thioarsenic acids on the enargite surface was discussed. On the other hand, covellite (CuS), under low concentrations of arsenate ions, showed similar zeta potential peaks. Additionally, enargite's zeta potential showed sign reversal for a certain pH range, with the addition of low concentrations of Cu(I) and Cu(II) ions, suggesting that other hydrolysis and precipitation reactions may also be involved.     

Geology and geochemistry of the sediment-hosted Cheshmeh-Konan redbed-type copper deposit,NW Iran

The several-hundred-m-thick Miocene Upper Red Formation in northwestern Iran hosts stratiform and fault-controlled copper mineralization. Copper enrichment in the percent range occurs in dm-thick carbonaceous sandstone and shale units within the clastic redbed sequence and consists of fine-grained disseminated copper sulfides (chalcopyrite, bornite, chalcocite) and supergene alteration minerals (covellite, malachite and azurite). The copper mineralization formed after calcite cementation of the primary rock permeability. Copper sulfides occur mainly as replacement of diagenetic pyrite, which, in turn, replaced organic matter. Electron microprobe analysis on bornite, chalcocite and covellite identifies elevated silver contents in these minerals (up to 0.12, 0.72 and 1.21 wt%, respectively), whereas chalcopyrite and pyrite have only trace amounts of silver (<0.26 and 0.06 wt%, respectively). Microthermometric data on fluid inclusions in authigenic quartz and calcite indicate that the Cu mineralization is related to a diagenetic fluid of moderate-to low temperature (Th = 96–160 °C) but high salinity (25–38 wt% CaCl₂ equiv.). The range of δ³⁴S in pyrite is −41.9 to −16.4‰ (average −31.4‰), where framboidal pyrite shows the most negative values between −41.9 and −31.8‰, and fine-grained pyrite has relatively heavier δ³⁴S values (−29.2 to −16.4‰), consistent with a bacteriogenic derivation of the sulfur. The Cu-sulfides (chalcopyrite, bornite and chalcocite) show slightly heavier values from −14.6 to −9.0‰, and their sulfur sources may be both the precursor pyrite-S and the bacterial reduction of sulfate-bearing basinal brines. Carbonates related to the ore stage show isotopically light values of δ¹³C_V-PDB from −8.2 to −5.1‰ and δ¹⁸O_V-PDB from −10.3 to −7.2‰, indicating a mixed source of oxidation of organic carbon (ca. −20‰) and HCO₃⁻ from seawater/porewater (ca. 0‰). The copper mineralization is mainly controlled by organic matter content and paleopermeability (intragranular space to large fracture patterns), enhanced by feldspar and calcite dissolution. The Cheshmeh-Konan deposit can be classified as a redbed-type sediment-hosted stratiform copper (SSC) deposit.     

Boron,sulphur and copper isotope systematics in the orogenic gold deposits of the Archaean Hattu schist belt,eastern Finland

The Hattu schist belt is located in the western part of the Archaean Karelian domain of the Fennoscandian Shield. The orogenic gold deposits with Au–Bi–Te geochemical signatures are hosted by NE–SW, N–S and NW–SE oriented shear zones that deform 2.76–2.73 Ga volcanic and sedimentary sequences, as well as 2.75–2.72 Ga tonalite–granodiorite intrusions and diverse felsic porphyry dykes. Mo–W mineralization is also present in some tonalite intrusions, both separate from, and associated with Au mineralization. Somewhat younger, unmineralized leucogranite intrusions (2.70 Ga) also intrude the belt. Lower amphibolite facies peak metamorphism at 3–5 kbar pressures and at 500–600 °C temperatures affected the belt at around 2.70 Ga and post-date hydrothermal alteration and ore formation. In this study, we investigated the potential influence of magmatic-hydrothermal processes on the formation of orogenic gold deposits on the basis of multiple stable isotope (B, S, Cu) studies of tourmaline and sulphide minerals by application of in situ SIMS and LA ICP MS analytical techniques.Crystal chemistry of tourmaline from a Mo–W mineralization hosted by a tonalite intrusion in the Hattu schist belt is characterized by Fe^3 +–Al^3 +-substitution indicating relatively oxidizing conditions of hydrothermal processes. The range of δ¹¹B data for this kind of tourmaline is from − 17.2‰ to − 12.2‰. The hydrothermal tourmaline from felsic porphyry dyke swith gold mineralization has similar crystal chemistry (e.g. dravite–povondraite compositional trend with Fe^3 +–Al^3 + substitution) and δ¹¹B values between − 19.0‰ and − 9.6‰. The uvite–foitite compositional trend and δ¹¹B ‰ values between − 24.1% and − 13.6% characterize metasomatic–hydrothermal tourmaline from the metasediment-hosted gold deposits. Composition of hydrothermal vein-filling and disseminated tourmaline from the gold-bearing shear zones in metavolcanic rocks is transitional between the felsic intrusion and metasedimentary rock hosted hydrothermal tourmaline but the range of average boron isotope data is essentially identical with that of the metasediment-hosted tourmaline. Rock-forming (magmatic) tourmaline from leucogranite has δ¹¹B values between − 14.5‰ and − 10.8‰ and the major element composition is similar to that of the metasediment-hosted tourmaline.The range of δ³⁴S_VCDT values measured in pyrite, chalcopyrite and pyrrhotite is from − 9.1 to + 8.5‰, which falls within the typical range of sulphur isotope data for Archaean orogenic gold deposits. In the Hattu schist belt, positive δ³⁴S_VCDT values characterize metasediment-hosted gold ores with sulphide parageneses dominated by pyrrhotite and arsenopyrite. The δ³⁴S_VCDT values are both positive and negative in ore mineral parageneses within felsic intrusive rocks in which variable amounts of pyrrhotite are associated with pyrite. Purely negative values were only recorded from the pyrite-dominated gold mineralization within metavolcanic units. Therefore the shift of δ³⁴S_VCDT values to the negative values reflects precipitation of sulphide minerals from relatively oxidizing fluids. The range of measured δ⁶⁵Cu_NBS978 values from chalcopyrite is from − 1.11 to 1.19‰. Positive values are common for mineralization in felsic intrusive rocks and negative values are more typical for deposits confined to metasedimentary rocks. Positive and negative δ⁶⁵Cu_NBS978 values occur in the ores hosted by metavolcanic rocks. There is no correlation between sulphur and copper isotope data obtained in the same chalcopyrite grains.Evaluation of sulphur and boron isotope data together and comparisons with other Archaean orogenic gold provinces supports the hypothesis that the metasedimentary rocks were the major sources of sulphur and boron in the orogenic gold deposits in the Hattu schist belt. Variations in major element and boron isotope compositions in tourmaline, as well as in the δ³⁴S_VCDT values in sulphide minerals are attributed to localized involvement of magmatic fluids in the hydrothermal processes. The results of copper isotope studies indicate that local sources of copper in orogenic gold deposits may potentially be recognized if the original, distinct signatures of the sources have not been homogenized by widespread interaction of fluids with a large variety of rocks and provided that local chemical variations have been too small to trigger changes in the oxidation state of copper during hydrothermal processes.     

An experimental model approach of biologically-assisted silicate dissolution with olivine and Escherichia coli – Impact on chemical weathering of mafic rocks and atmospheric CO2 drawdown

Chemical weathering of Mg, Ca-silicates and alumino-silicates contributes significantly to the drawdown of atmospheric CO₂ over long time scales. The present work focuses on how this mode of weathering may change in the presence of free-living bacteria in oligotrophic waters, which compose most of the surface freshwaters of the Earth. Forsterite (Fo90) was reacted for 1 week with a stable Escherichia coli population in water maintained at 37 °C and neutral pH in a batch reactor. Control samples with suspensions of pure olivine powders and E. coli cells in pure water were also used for reference. Olivine controls reproduce the Mg, Si and Fe release in solutions predicted from rates published in the literature with pH shifts of less than 0.5 unit. After 1 week, under abiotic conditions, weathered surfaces are enriched in Fe and Fe³⁺ relative to the initial composition of the mineral. Bacterial controls (without minerals) show decreasing Eh with increasing cell concentrations (−50 mV with 7 × 10⁷ cells/mL and −160 mV with 8 × 10⁸ cells/mL). Magnesium concentrations in bacterial control solutions are in the μg/L range and can be accounted for by the release of Mg from dead cells. More than 80% of the cells were still alive after 1 week. The solutions obtained in the experiments in which olivine reacts in the presence of cells show Mg and Si concentrations a few tens of percent lower than in the mineral control samples, with a prominent depletion of Fe(III) content of the mineral surfaces. Magnesium mass balance discounts both significant bacterial uptake and inhibition of the Mg dissolution rates as a consequence of changing pH and Eh. Coating by bacterial cell layers is also negligible. E. coli reduces the chemical weathering of olivine. This study infers that the presence of free-living Proteobacteria, a prevalent group of subsurface bacteria, should decrease the amount of riverine Mg released by chemical weathering of mafic rocks.     

Dissolution kinetics and biodurability of tremolite particles in mimicked lung fluids: Effect of citrate and oxalate

The effect of citrate and oxalate on tremolite dissolution rate was measured at 37 °C in non-stirred flow-through reactors, using modified Gamble’s solutions at pH 4 (macrophages), 7.4 (interstitial fluids) and 5.5 (intermediate check point) containing 0, 0.15, 1.5 and 15 mmol L⁻¹ of citrate or oxalate. The dissolution rates calculated from Si concentration in the output solutions without organic ligands depend on pH, decreasing when the pH increases from −13.00 (pH 4) to −13.35 (pH 7.4) mol g⁻¹ s⁻¹ and following a proton-promoted mechanism. The presence of both ligands enhances dissolution rates at every pH, increasing this effect when the ligand concentration increases. Citrate produces a stronger effect as a catalyst than oxalate, mainly at more acidic pHs and enhances dissolution rates until 20 times for solutions with 15 mmol L⁻¹ citrate. However, at pH 7.4 the effect is lighter and oxalate solutions (15 mmol L⁻¹) only enhances dissolution rates eight times respect to free organic ligand solutions. Dissolution is promoted by the attack to protons and organic ligands to the tremolite surface. Magnesium speciation in oxalate and citrate solutions shows that Mg citrate complexes are more effective than oxalate ones during the alteration of tremolite in magrophages, but this tendency is the opposite for interstitial fluids, being oxalate magnesium complexes stronger. The biodurability estimations show that the destruction of the fibers is faster in acidic conditions (macrophages) than in the neutral solutions (interstitial fluid). At pH 4, both ligands oxalate and citrate reduce the residence time of the fibers with respect to that calculated in absence of ligands. Nevertheless, at pH 7.4 the presence of ligands does not reduce significantly the lifetime of the fibers.     

Geology,mineralization, stable isotope,and fluid inclusion characteristics of the Vostok-2 reduced W-Cu skarn and Au-W-Bi-As stockwork deposit,Sikhote-Alin,Russia

The large (>180 Kt WO₃ and at least 10–15 t Au) Vostok-2 deposit is situated in a metallogenic belt of W, Sn-W, Au, and Au-W deposits formed in late to post-collisional tectonic environment after cessation of active subduction. The deposit is related to an ilmenite-series high-K calc-alkaline plutonic suite that, by its petrologic signatures, is transitional between those at W-dominant and Au-dominant reduced intrusion-related deposits. Consistently, besides large W-Cu skarns of the reduced type, the deposit incorporates quartz stockworks with significant Au-W-Bi mineralization also formed in a reduced environment. The hydrothermal stages include prograde and retrograde, essentially pyroxene skarns, hydrosilicate (amphibole, chlorite, quartz) alteration, and phyllic (quartz, sericite, albite, apatite, and carbonate) alteration assemblages. These assemblages contain abundant scheelite associated with pyrrhotite, chalcopyrite and, at the phyllic stage, also with Bi minerals, As-Bi-Sb-Te-Pb-Zn sulfides and sulfosalts, as well as Au mineralization. The fluid evolution included hot, high-pressure (420–460 °C, 1.1–1.2 kbar), low-salinity (5.4–6.0 wt% NaCl-equiv.) aqueous fluids at the retrograde skarn stage, followed by lower temperature cyclic releases of high-carbonic, low salinity to non-carbonic moderate-salinity aqueous fluids. At the hydrosilicate stage, a high-carbonic, CH₄-dominated, hot (350–380 °C) low salinity fluid was followed by cooler (300–350 °C) non-carbonic moderate-salinity (5.7–14.9 wt% NaCl-equiv.) fluid. At the phyllic stage, a high-carbonic, CO₂-dominated, moderately-hot (330–355 °C, 0.9 kbar) low salinity fluid was followed by cooler (230–265 °C) non-carbonic moderate-salinity (6.6–12.0 wt% NaCl-equiv.) fluid. A homogenized magmatic source of water (δ¹⁸O_H2O = +8.3 to +8.7‰), and a sedimentary source of sulfur (δ³⁴S = −6.9 to −6.2‰) and carbon (δ¹³C_fluid = −20.1 to −14.9‰) at the hydrosilicate stage are suggested. A magmatic source of water (δ¹⁸O = +8.6 to +9.2‰) and a sedimentary source of sulfur (δ³⁴S = −9.3 to −4.1‰) but a magmatic (mantle- to crustal-derived) source of carbon (δ¹³C_fluid = −6.9 to −5.2‰) are envisaged for fluids that formed the early mineral assemblage of the phyllic stage. Then, the role of sedimentary carbon again increased toward the intermediate (δ¹³C_fluid = −16.4 to −14.5‰) and late (δ¹³C_fluid = −16.3 to −14.7‰) phyllic mineral assemblages. The magmatic differentiation was responsible for the fluid enrichment in W, whereas Au and Bi could also have been sourced from mafic magma. The decreasing temperatures, together with elevated Ca content in non-boiling fluids, promoted scheelite deposition at the early hydrothermal stages. The most intense scheelite deposition at the phyllic stage was caused by CO₂ removal due to boiling of CO₂-rich fluids; further cooling of non-boiling fluids favoured joint deposition of scheelite, Bi and Au.     

Re–Os dating of chalcopyrite from selected mineral deposits in the Kalatag district in the eastern Tianshan Orogen,China

The Kalatag Cu–Zn–Au district contains a number of economically important Cu deposits in eastern Tianshan in Xinjiang, NW China. Due to the lack of precise mineralization ages, the metallogenesis of this area has long been a matter of debate. In this study, chalcopyrite Re–Os isotope methods are used to date the South Meiling Cu–Zn and Hongshi Cu deposits in the eastern part of Kalatag area.The South Meiling Cu–Zn deposit is hosted in volcanic-sedimentary rocks of the Late Ordovician to Early Silurian Daliugou Formation. The deposit consists of two parts: a concordant massive sulfide ores and discordant vein-type ores located in the footwall strata. The principal ore minerals are pyrite, chalcopyrite, sphalerite, minor tetrahedrite, galena and pyrrhotite. Gangue minerals include quartz, sericite and barite, and minor chlorite, plagioclase and carbonate minerals. The Hongshi Cu deposit represents a hydrothermal vein system hosted in the mafic volcanic rocks of Daliugou Formation. The orebodies are associated with quartz veins and controlled by subsidiary faults of the Kalatag fault. The ore-forming process can be divided into the early, middle and late stages and is characterized by quartz–pyrite, quartz–chalcopyrite–pyrite and quartz–carbonate–gypsum veins, respectively.Re–Os analyses of chalcopyrite from the South Meiling Cu–Zn deposit yield an isochron age of 434.2 ± 3.9 Ma and initial ¹⁸⁷Os/¹⁸⁸Os ratio of 0.647 ± 0.098 (MSWD = 0.59). Re–Os analyses of chalcopyrite from the Hongshi Cu deposit yield an isochron age of 431.8 ± 2.7 Ma and initial ¹⁸⁷Os/¹⁸⁸Os ratio of − 0.165 ± 0.075 (MSWD = 0.77). Since chalcopyrite is the primary copper mineral, we interpret these isochron ages as the timing of Cu mineralization, based on field geology and petrographic evidence. These results suggest that the Re–Os ages presented here provide, for the first time, a direct constraint on an early Paleozoic Cu mineralization event of the eastern Tianshan Orogen. The high initial ¹⁸⁷Os/¹⁸⁸Os ratios (0.647 ± 0.098) ratio of ~ 434 Ma chalcopyrite from the South Meiling deposit suggest that the metal was sourced from a two end-member mixing of crust and mantle materials. Moreover, we propose that the VMS mineral system and hydrothermal vein system of the Kalatag district were related to the south-dipping subduction of the Kalamaili oceanic plate during the Late Ordovician–Silurian.     

The Diavik waste rock project: Initial geochemical response from a low sulfide waste rock pile

Three large-scale experimental waste rock piles (test piles) were constructed and instrumented at the Diavik Diamond Mine in the Northwest Territories, Canada, as part of an integrated field and laboratory study to measure and compare physical and geochemical characteristics of experimental, low sulfide waste rock piles at various scales. This paper describes the geochemical response during the first season from a test pile containing 0.053 wt.% S. Bulk drainage chemistry was measured at two sampling points for pH, Eh, alkalinity, dissolved cations and anions, and nutrients. The geochemical equilibrium model MINTEQA2 was used to interpret potential mineral solubility controls on water chemistry. The geochemical response characterizes the initial flushing response of blasting residues and oxidation products derived from sulfides in waste rock exposed to the atmosphere for less than 1 year. Sulfate concentrations reached 2000 mg L⁻¹ when ambient temperatures were >10 °C, and decreased as ambient temperatures declined to <0 °C. The pH decreased to <5, concomitant with an alkalinity minimum of <1 mg L⁻¹ (as total CaCO₃), suggesting all available alkalinity is consumed by acid-neutralizing reactions. Concentrations of Al and Fe were <0.36 and <0.11 mg L⁻¹, respectively. Trends of pH and alkalinity and the calculated saturation indices for Al and Fe (oxy)hydroxides suggest that dissolution of Al and Fe (oxy)hydroxide phases buffers the pH. The effluent water showed increased concentrations of dissolved Mn (<13 mg L⁻¹), Ni (<7.0 mg L⁻¹), Co (<1.5 mg L⁻¹), Zn (<0.5 mg L⁻¹), Cd (<0.008 mg L⁻¹) and Cu (<0.05 mg L⁻¹) as ambient temperatures increased. Manganese is released by aluminosilicate weathering, Ni and Co by pyrrhotite [Fe_1−xS] oxidation, Zn and Cd by sphalerite oxidation, and Cu by chalcopyrite [CuFeS₂] oxidation. No dissolved metals appear to have discrete secondary mineral controls. Changes in SO₄, pH and metal concentrations indicate sulfide oxidation is occurring and effluent concentrations are influenced by ambient temperatures and, possibly, increasing flow path lengths that transport reaction products from previously unflushed waste rock.     

SHRIMP zircon U–Pb geochronology,geochemistry and H–O–Si–S–Pb isotope systematics of the Kanggur gold deposit in Eastern Tianshan,NW China: Implication for ore genesis

The Kanggur gold deposit is located in the southern margin of the Central Asia Orogenic Belt and in the western segment of the Kanggur–Huangshan ductile shear belt in Eastern Tianshan, northwestern China. The orebodies of this deposit are hosted in the Lower Carboniferous volcanic rocks of the Aqishan Formation and mainly consist of andesite, dacite and pyroclastic rocks. The SHRIMP zircon U–Pb age data of the andesite indicate that the volcanism in the Kanggur area might have occurred at ca. 339 Ma in the Early Carboniferous, and that the mineralization age of the Kanggur gold deposit was later than the age of volcanic rocks in the area. Geochemically, the andesite rocks of the Aqishan Formation belong to low-tholeiite and calc-alkaline series and display relative depletions in high field strength elements (HFSEs; i.e. Nb, Ta and Ti). The δ¹⁸O_w and δD_w values vary from − 9.1‰ to + 3.8‰ and − 66.0‰ to − 33.9‰, respectively, indicating that the ore-forming fluids were mixtures of metamorphic and meteoric waters. The δ³⁰Si values of 13 quartz samples range from − 0.3‰ to + 0.1‰ with an average of − 0.15‰, and the δ³⁴S values of 18 sulphide samples range from − 0.9‰ to + 2.2‰ with an average of + 0.54‰. The ²⁰⁶Pb/²⁰⁴Pb, ²⁰⁷Pb/²⁰⁴Pb and ²⁰⁸Pb/²⁰⁴Pb values of 10 sulphide samples range from 18.166 to 18.880, 15.553 to 15.635 and 38.050 to 38.813, respectively, showing similarities to orogenic Pb; these values are consistent with those of the andesite from the Kanggur area, suggesting a common lead source. All of the silicon, sulphur and lead isotopic systems indicate that the ore-forming fluids and materials were mainly derived from the Aqishan Formation, and that the host volcanic rocks of the Aqishan Formation probably played a significant role in the Kanggur gold mineralization. Integrating the data obtained from studies on geology, geochronology, petro-geochemistry and H–O–Si–S–Pb isotope systematics, we suggest that the Kanggur gold deposit is an orogenic-type deposit formed in Eastern Tianshan orogenic belt during the Permian post-collisional tectonism.     

The influence of citric acid,EDTA, and fulvic acid on U(VI) sorption onto kaolinite

Uranium(VI) sorption onto kaolinite was investigated as a function of pH (3–12), sorbate/sorbent ratio (1 × 10^?6–1 × 10^?4 M U(VI) with 2 g/L kaolinite), ionic strength (0.001–0.1 M NaNO₃), and pCO₂ (0–5%) in the presence or absence of 1 × 10^?2–1 × 10^?4 M citric acid, 1 × 10^?2–1 × 10^?4 M EDTA, and 10 or 20 mg/L fulvic acid. Control experiments without-solids, containing 1 × 10^?6–1 × 10^?4 M U(VI) in 0.01 M NaNO₃ were used to evaluate sorption to the container wall and precipitation of U phases as a function of pH. Control experiments demonstrate significant loss (up to 100%) of U from solution. Although some loss, particularly in 1 × 10^?5 and 1 × 10^?4 M U experiments, is expected due to precipitation of schoepite, adsorption on the container walls is significant, particularly in 1 × 10^?6 M U experiments. In the absence of ligands, U(VI) sorption on kaolinite increases from pH ～3 to 7 and decreases from pH ～7.5 to 12. Increasing ionic strength from 0.001 to 0.1 M produces only a slight decrease in U(VI) sorption at pH < 7, whereas 10% pCO₂ greatly diminishes U(VI) sorption between pH ～5.5 and 11. Addition of fulvic acid produces a small increase in U(VI) sorption at pH < 5; in contrast, between pH 5 and 10 fulvic acid, citric acid, and EDTA all decrease U(VI) sorption. This suggests that fulvic acid enhances U(VI) sorption slightly via formation of ternary ligand bridges at low pH, whereas EDTA and citric acid do not form ternary surface complexes with the U(VI), and that all three ligands, as well as carbonate, form aqueous uranyl complexes that keep U(VI) in solution at higher pH.     

Origin of a barite-sulfide ore deposit in the Mykonos intrusion,cyclades: Trace element,isotopic, fluid inclusion and raman spectroscopy evidence

The polymetallic Mykonos vein system in the Cyclades, Greece, consists of 15 tension-gashes filled with barite, quartz, pyrite, sphalerite, chalcopyrite and galena in ca. 13.5 Ma, I-type, Mykonos monzogranite. Zones of silica and chlorite–muscovite alteration are associated with the veins and overprint pervasive silicification, phyllic and argillic alteration that affected large parts of the monzogranite. The mineralization cements breccias and consists of an early barite–silica–pyrite–sphalerite–chalcopyrite assemblage followed by later argentiferous galena. A combination of fluid inclusion and stable isotope data suggests that the barite and associated mineralization were deposited from fluids containing 2 to 17 wt.% NaCl equivalent, at temperatures of ~ 225° to 370 °C, under a hydrostatic pressure of ≤ 100 bars. The mineralizing fluids boiled and were saturated in H₂S and SO₂.Calculated δ¹⁸O_H2O and δD_H2O, initial ⁸⁷Sr/⁸⁶Sr isotope compositions and the trace and REEs elements contents are consistent with a model in which the mineralizing fluids were derived during alteration of the Mykonos intrusion and subsequently mixed with Miocene seawater. Heterogeneities in the calculated δ³⁴S_SO4^− 2 and δ³⁴S_H2S compositions of the ore fluids indicate two distinct sources for sulfur, namely of magmatic and seawater origin, and precipitation due to reduction of the SO₄^− 2 during fluid mixing. The physicochemical conditions of the fluids were pH = 5.0 to 6.2, logf_S2 = − 13.8 to − 12.5, logf_O2 = − 31.9 to − 30.9, logf_H2S(g) = − 1.9 to − 1.7, logf_Te2 = − 7.9 and logα(SO₄^− 2_(aq)/H₂S_(aq)) = + 2.6 to + 5.5. We propose that retrograde mesothermal hydrothermal alteration of the Mykonos monzogranite released barium and silica from the alkali feldspars. Barite was precipitated due to mixing of SO₄^− 2-rich Miocene seawater with the ascending Ba-rich magmatic fluid venting upwards in the pluton.     

Thermodynamic properties of tooeleite,Fe63+(As3+O3)4(SO4)(OH)4·4H2O

Tooeleite, nominally Fe₆³⁺(As³⁺O₃)₄(SO₄)(OH)₄·4H₂O, is a relatively uncommon mineral of some acid-mine drainage systems. Yet, if it does occur, it does so in large quantities, indicating that some specific conditions favor the formation of this mineral in the system Fe-As-S-O-H. In this contribution, we report the thermodynamic properties of synthetic tooeleite. The sample was characterized by powder X-ray diffraction, scanning electron microscopy, extended X-ray absorption fine-structure spectroscopy, and Mössbauer spectroscopy. These methods confirmed that the sample is pure, devoid of amorphous impurities of iron oxides, and that the oxidation state of arsenic is 3+. Using acid-solution calorimetry, the enthalpy of formation of this mineral from the elements at the standard conditions was determined as −6196.6 ± 8.6 kJ mol⁻¹. The entropy of tooeleite, calculated from low-temperature heat capacity data measured by relaxation calorimetry, is 899.0 ± 10.8 J mol⁻¹ K⁻¹. The calculated standard Gibbs free energy of formation is −5396.3 ± 9.3 kJ mol⁻¹. The log K_sp value, calculated for the reaction Fe₆(AsO₃)₄(SO₄)(OH)₄·4H₂O + 16H⁺ = 6Fe³⁺ + 4H₃AsO₃ + SO₄²⁻ + 8H₂O, is −17.25 ± 1.80. Tooeleite has stability field only at very high activities of aqueous sulfate and arsenate. As such, it does not appear to be a good candidate for arsenic immobilization at polluted sites. An inspection of speciation diagrams shows that the predominance field of Fe³⁺ and As³⁺ overlap only at strongly basic conditions. The formation of tooeleite, therefore, requires strictly selective oxidation of Fe²⁺ to Fe³⁺ and, at the same time, firm conservation of the trivalent oxidation state of arsenic. Such conditions can be realized only by biological systems (microorganisms) which can selectively oxidize one redox-active element but leave the other ones untouched. Hence, tooeleite is the first example of an “obligatory” biomineral under the conditions prevailing at or near the Earth's surface because its formation under these conditions necessitates the action of microorganisms.     

Scanning electron microscopy cathodoluminescence of quartz: Principles,techniques and applications in ore geology

Scanning electron microscopy cathodoluminescence (SEM-CL) of quartz has been a prevalent research technique in porphyry and epithermal systems for the past two decades. Quartz from specific geological environments reveals unique textures in SEM-CL, which can be used to constrain the evolution of these ore-bearing systems when complemented by fluid inclusion, hyperspectral mapping, and trace element studies. We review SEM-CL principles and instrumentation, sample preparation and handling, and experimental conditions of quartz SEM-CL imaging that result in the high quality CL images. The effects of sample polishing, accelerating voltage, beam spot size, working distance, vacuum conditions, image acquisition, and post-processing were examined through experimental trial. For the XL 30 ESEM and the attached Gatan PanaCL detector used, the optimum experimental conditions to obtain high quality panochromatic SEM-CL images of quartz at high vacuum mode for carbon-coated conductive samples are as follows: 15 kV accelerating voltage, relative beam spot size 6 (approximately 500 nm in diameter), HT − 570 V to − 580 V photomultiplier tube (PMT) voltage. Low vacuum mode (with chamber H₂O vapor pressure from 0.1 to 1.0 Torr) working conditions are similar to the conditions at high vacuum mode except the PMT voltage should be reduced to − 550 V to − 560 V. Working distances vary based on the position of user's retractable CL detector. The sample surface should be as close as possible to the CL detector, but a 1 mm clearance between the detector and the sample surface is recommended to prevent detector from possible damage by the sample. Several minutes of beam exposure prior to image acquisition at 320 second scan speeds at 50×–1500× magnifications is recommended to generate the greatest CL emission. Monochromatic CL imaging requires three scans over the same area using red, green, and blue optical filters that can be merged to produce a “true color” image. The red and green filters require stronger PMT voltages to produce sufficient CL emissions by an increase of − 200 V to − 300 V and − 150 V to − 200 V, respectively, from the PMT voltage used for panochromatic imaging. Special attention is given to the challenges associated with imaging hydrothermal quartz veining in ore deposits and the value of CL data as a foundation for geochemical studies. SEM-CL imaging of vein quartz is explored through case studies of the Red Hills Porphyry Cu –Mo Deposit, Texas, USA, and the Ertsberg–Grasberg Cu–Au District, Papua, Indonesia to aid in vein paragenesis. The most common application of quartz SEM-CL in ore geology is to reveal the relative timing of mineral precipitation, mineral dissolution, and inherited structural features. Understanding of temporal relations among these events makes it possible to select specific generations of quartz within a vein for further studies such as the TitaniQ thermometry and fluid inclusion microthermometry in order to establish T–P–X fluctuations throughout the development of a hydrothermal system.     

Geological and isotopic constraints on the origin of the Anle carbonate-hosted Zn–Pb deposit in northwestern Yunnan Province,SW China

The Anle Zn–Pb deposit, hosted by Upper Cambrian dolostone, is located in the southern Songpan–Ganzi Block in southwest China. In this deposit, ore bodies occur as stratiform lenses and consist of galena, sphalerite and pyrite as ore minerals, and quartz, dolomite and calcite as gangue minerals. The mineralization shows mainly vein, banded and brecciated structures. Four ore bodies have been found in the Anle deposit, with a combined 2.0 million tonnes (Mt) of sulfide ores at average grades of 1.64 wt.% Pb, 6.64 wt.% Zn and 45 g/t Ag. Brown, brownish-yellow and yellow sphalerite samples have δ⁶⁶Zn values ranging from + 0.08 to + 0.10‰ (average + 0.09‰, n = 3), + 0.12 to + 0.38‰ (average + 0.24‰, n = 8) and + 0.40 to + 0.50‰ (average + 0.46‰, n = 3), respectively. We interpret the progressively heavier Zn isotopes from brown to yellow sphalerite as being led by kinetic Raleigh fractional crystallization. Calcite samples have δ¹³C_PDB and δ¹⁸O_SMOW values ranging from − 4.8 to − 0.2‰ (average − 1.7‰, n = 7) and + 17.9 to + 21.4‰ (average + 19.6‰, n = 7), respectively. Whole-rock δ¹³C_PDB and δ¹⁸O_SMOW values of the Cambrian ore-hosting dolostone range from + 0.1 to + 1.1‰ (average + 0.6‰, n = 3) and + 23.2 to + 24.1‰ (average + 23.6‰, n = 3), respectively. This suggests that carbon in the ore-forming fluids was provided by the host dolostone through carbonate dissolution. δ³⁴S_CDT values of sulfide samples range between − 1.3‰ and + 17.8‰ with an average value of + 6.3‰ (n = 25), lower than evaporites (such as barite + 19.8‰) in the overlaying Lower Ordovician sedimentary strata. The data suggest that sulfur in the hydrothermal fluids were derived from evaporites by thermo-chemical sulfate reduction (TSR). ²⁰⁶Pb/²⁰⁴Pb, ²⁰⁷Pb/²⁰⁴Pb and ²⁰⁸Pb/²⁰⁴Pb ratios for sulfide minerals range from 17.63 to 17.86, 15.58 to 15.69 and 37.62 to 37.95, respectively. The data are similar to those of the age-corrected Cambrian ore-hosting dolostone (²⁰⁶Pb/²⁰⁴Pb = 17.70–17.98, ²⁰⁷Pb/²⁰⁴Pb = 15.58–15.65 and ²⁰⁸Pb/²⁰⁴Pb = 37.67–38.06), but lower than those of age-corrected Ordovician sandstone and slate (²⁰⁶Pb/²⁰⁴Pb = 18.54–19.58, ²⁰⁷Pb/²⁰⁴Pb = 15.73–15.81 and ²⁰⁸Pb/²⁰⁴Pb = 38.44–39.60). This indicates that ore Pb was most likely to be derived from the Cambrian ore-hosting dolostone. Therefore, our new geological and isotopic evidence suggests that the Anle Zn–Pb deposit is best classified to be an epigenetic carbonate-hosted Mississippi Valley-type (MVT) deposit.     

Geochronology,geochemistry and Sr–Nd–Hf–S–Pb isotopes of the Early Cretaceous Taoxihu Sn deposit and related granitoids,SE China

The Taoxihu deposit (eastern Guangdong, SE China) is a newly discovered Sn polymetallic deposit. Zircon U-Pb dating yielded 141.8 ± 1.0 Ma for the Sn-bearing granite porphyry and 145.5 ± 1.6 Ma for the biotite granite batholith it intruded. The age of the granite porphyry is consistent (within error) with the molybdenite Re–Os isochron age (139.0 ± 1.1 Ma) of the Sn mineralization, indicating a temporal link between the two. Geochemical data show that the granite porphyry is weakly peraluminous, contain high Si, Na and K, low Fe, Mg, Ca and P, and relatively high Rb/Sr and low K/Rb values. The rocks are enriched in Rb, Th, U, K, and Pb and depleted in Ba, Sr, Ti and Eu, resembling highly fractionated I-type granites. They contain bulk rock initial ⁸⁷Sr/⁸⁷Sr of 0.707371–0.707730 and εNd(t) of −5.17 to −4.67, and zircon εHf(t) values from −6.67 to −2.32, with late Mesoproterozoic T_DM2 ages for both Nd and Hf isotopes. This suggests that the granite porphyry was likely formed by the partial melting of the crustal basement of Mesoproterozoic overall residence age with minor mantle input.δ³⁴S_CDT values of the Taoxihu chalcopyrite and pyrite range from 0.1 to 2.1‰ (average: 0.9‰), implying a dominantly magmatic sulfur source. The ²⁰⁶Pb/²⁰⁴Pb, ²⁰⁷Pb/²⁰⁴Pb and ²⁰⁸Pb/²⁰⁴Pb ratios of the Taoxihu sulfide ores are 18.497–18.669, 15.642–15.673 and 38.764–38.934, respectively, indicating a mainly upper continental crustal lead source with minor mantle contribution. The highly fractionated and reduced (low calculated zircon Ce⁴⁺/Ce³⁺ and Eu_N/Eu_N¹ values) nature of the ore-forming granitic magma may have facilitated the Sn enrichment and played a key role in the Sn mineralization. We propose that the ore-forming fluids at Taoxihu were of magmatic-hydrothermal origin derived from the granite porphyry, and that both the granite porphyry and the Sn mineralization were likely formed in an extensional setting, possibly related to the subduction slab rollback of the Paleo-Pacific Plate.     

Geologic and geochemical insights into the formation of the Taiyangshan porphyry copper–molybdenum deposit,Western Qinling Orogenic Belt,China

Taiyangshan is a poorly studied copper–molybdenum deposit located in the Triassic Western Qinling collisional belt of northwest China. The intrusions exposed in the vicinity of the Taiyangshan deposit record episodic magmatism over 20–30 million years. Pre-mineralization quartz diorite porphyries, which host some of the deposit, were emplaced at 226.6 ± 6.2 Ma. Syn-collisional monzonite and quartz monzonite porphyries, which also host mineralization, were emplaced at 218.0 ± 6.1 Ma and 215.0 ± 5.8 Ma, respectively. Mineralization occurred during the transition from a syn-collisional to a post-collisional setting at ca. 208 Ma. A barren post-mineralization granite porphyry marked the end of post-collisional magmatism at 200.7 ± 5.1 Ma. The ore-bearing monzonite and quartz monzonite porphyries have a ε_Hf(t) range from − 2.0 to + 12.5, which is much more variable than that of the slightly older quartz diorite porphyries, with T_DM2 of 1.15–1.23 Ga corresponding to the positive ε_Hf(t) values and T_DM1 of 0.62–0.90 Ga corresponding to the negative ε_Hf(t) values. Molybdenite in the Taiyangshan deposit with 27.70 to 38.43 ppm Re suggests metal sourced from a mantle–crust mixture or from mafic and ultramafic rocks in the lower crust. The δ³⁴S values obtained for pyrite, chalcopyrite, and molybdenite from the deposit range from + 1.3‰ to + 4.0‰, + 0.2‰ to + 1.1‰, and + 5.3‰ to + 5.9‰, respectively, suggesting a magmatic source for the sulfur. Calculated δ¹⁸O_fluid values for magmatic K-feldspar from porphyries (+ 13.3‰), hydrothermal K-feldspar from stockwork veins related to potassic alteration (+ 11.6‰), and hydrothermal sericite from quartz–pyrite veins (+ 8.6 to + 10.6‰) indicate the Taiyangshan deposit formed dominantly from magmatic water. Hydrogen isotope values for hydrothermal sericite ranging from − 85 to − 50‰ may indicate that magma degassing progressively depleted residual liquid in deuterium during the life of the magmatic–hydrothermal system. Alternatively, δD variability may have been caused by a minor amount of mixing with meteoric waters. We propose that the ore-related magma was derived from partial melting of the ancient Mesoproterozoic to Neoproterozoic middle to lower continental crust. This crust was likely metasomatized during earlier subduction, and the crustal magmas may have been contaminated with lithospheric mantle derived magma triggered by MASH (e.g., melting, assimilation, storage, and homogenization) processes during collisional orogeny. In addition, a significant proportion of the metals and sulfur supplied from mafic magma were simultaneously incorporated into the resultant hybrid magmas.