甘肃天水柴家庄金矿地质特征与找矿标志

柴家庄金矿位于西秦岭造山带北秦岭加里东褶皱带柴家庄-庞家河金矿带上,赋存于柴家庄二长花岗岩外接触带的丹凤群中,严格受NE向及NNW向断裂控制。矿床的形成受丹凤群、印支-燕山期酸性侵入体及断裂构造3种因素控制。岩体外接触带0～2km范围内的NE向、NNW向断裂构造带是找矿的最佳方向。在详细研究矿床地质及地球化学特征的基础上,总结了该矿床的主要控矿因素,并归纳了主要找矿标志,为区内找矿提供了新思路。     

柴家庄金矿成矿模式及找矿方向探讨

柴家庄金矿位于西秦岭褶皱系北秦岭加里东褶皱带李子园—吊把子金矿带上,赋存于柴家庄二长花岗岩体外接触带的丹凤群地层中,严格受NE向及NNW向断裂控制。矿床形成经历了火山沉积期、区域变质期、构造热液成矿期及岩浆热液成矿期4个阶段,属沉积变质—岩浆期后热液叠加改造的变质热液金矿床。岩体外接触带0～2km范围内的NE向、NNW向断裂构造带是找矿的最佳方向。     

甘肃柴家庄金矿床地球化学特征及矿床成因

柴家庄金矿是石英脉型金矿床,产于花岗岩体旁侧、下古生界李子园群火山岩中;区域地球化学和矿区地球化学特征反映了火山岩和岩体为Au的高背景带.金-石英-多金属硫化物阶段是金的主要成矿阶段.δ34S、δ18O、δD及成矿温度和盐度等矿床地球化学特征均显示了岩浆热液活动是成矿的主导因素.同时,火山作用、区域变质作用、多期构造活动、大气降水等也参与了成矿.     

贵州贞丰—普安金矿整装勘查区找矿与研究新进展

通过贵州贞丰-普安金矿国家级整装勘查区的典型矿床研究,结合区域成矿地质背景,厘定了金矿成矿机制,构建了典型矿床成矿模式和区域成矿模式;通过成矿地质体、成矿构造与成矿结构面、成矿作用特征标志研究,构建了区域找矿预测地质模型和隐伏矿找矿的"五合一"技术应用示范体系;开展了找矿预测及靶区验证,新发现深埋800 1 000 m以下隐伏金矿体;整装勘查累计查明金资源量470 t,其中新增274 t,实现贵州金矿找矿历史性突破。     

山东大尹格庄金矿床深部三维定量成矿预测

大尹格庄金矿是胶西北招平断裂带中段的大型金矿床,但随着逐渐的开采其保有资源量不断下降,急需在矿床的深边部区域开展接续资源找矿工作。本文以大尹格庄金矿为研究对象,以区域成矿理论和找矿勘查模型为指导,利用三维地质建模技术构建了相关地质体的三维模型,在此基础上,采用定量化的方法提取地质体与成矿相关的控矿因素指标和矿化指标,并建立了三维定量成矿预测模型,并应用该模型圈定了3个找矿靶区。研究表明,该方法能够适用于大中型矿山的深边部找矿工作,其三维及定量化的预测结果能够为后续的勘探及开采工作提供重要参考。     

西秦岭柴家庄花岗岩的同位素年代

西秦岭柴家庄花岗岩的同位素年代①宋忠宝冯益民何世平（中国地质科学院西安地质矿产研究所西安７１００５４）李增庆赵利利何芳（甘肃地矿局第一地质队天水７４１０２０）近几年来，在西秦岭柴家庄花岗岩体周围发现了金矿，有关柴家庄岩体的同位素年龄引起了广大地质工作...     

山东归来庄金矿床地质特征及成矿模型

为查明山东归来庄金矿的成因信息和成矿过程,笔者通过系统梳理成矿地质背景和矿床地质特征,并运用黄铁矿Rb-Sr、碳氧稳定同位素和流体包裹体等方法,查明归来庄金矿是中低温成矿流体经过多期次、多阶段演化,形成于中侏罗世晚期的矿床。在此基础上结合前人研究成果,建立了成矿模型。     

多拉纳萨依及外围金矿床特征、成矿规律和找矿模型

以新疆北部多拉纳萨依金矿为典型矿床,系统分析了该类矿床的成矿地质、地球化学和地球物理特征。总结和归纳出了本地区的金矿区域成矿规律和找矿标志。进而建立了该区金矿的综合信息找矿模型。     

牟平邓格庄金矿地质特征及找矿方向

邓格庄金矿成因类型为中温热液充填式富硫含金黄铁矿石英脉型金矿床。通过对邓格庄金矿床的地质特征、控矿因素及矿床成因的系统研究,认为矿区NNE向断裂与其他方向断裂交汇部位为金矿的有利成矿部位,在分析找矿标志的基础上,提出应加大矿区深部及外围的找矿力度,进一步查证地球物理、化学异常,以期发现新的金矿远景区,进而指出了深部找矿的方向。     

福建双旗山金矿床地质特征及矿区外围找矿潜力分析

双旗山金矿位于武夷成矿带金矿成矿远景区内,地处闽中"金三角"地区,金矿体主要贮存于中-晚元古代大岭组变质岩中,为韧性剪切带型金矿床。通过研究矿床地质特征,开展综合信息成矿规律及预测评价,分析矿区及其外围找矿前景,初步提出该区下步找矿方向和找矿靶区。     

Wavelength-dispersive X-ray fluorescence spectrometric determination of Sc, V, Cr, Co, Ni, Cu, Zn, Rb, Sr, Y, Zr, Nb, Ba, Pb, and Th in komatiites

Komatiites are mantle-derived ultramafic volcanic rocks. Komatiites have been discovered in several States of India, notably in Karnataka. Studies on the distribution of trace-elements in the komatiites of India are very few. This paper proposes a simple, accurate, precise, rapid, and non-destructive wavelength-dispersive x-ray fluorescence (WDXRF) spectrometric technique for determining Sc, V, Cr, Co, Ni, Cu, Zn, Rb, Sr, Y, Zr, Nb, Ba, Pb, and Th in komatiites, and discusses the accuracy, precision, limits of detection, x-ray spectral-line interferences, inter-element effects, speed, advantages, and limitations of the technique. The accuracy of the technique is excellent (within 3%) for Sc, V, Cr, Co, Ni, Cu, Zn, Rb, Sr, Zr, Nb, Ba, Pb, and Th and very good (within 4%) for Y. The precision is also excellent (within 3%) for Sc, V, Cr, Co, Ni, Cu, Zn, Rb, Sr, Y, Zr, Nb, Ba, Pb, and Th. The limits of detection are: 1 ppm for Sc and V; 2 ppm for Cr, Co, and Ni; 3 ppm for Cu, Zn, Rb, and Sr; 4 ppm for Y and Zr; 6 ppm for Nb; 10 ppm for Ba; 13 ppm for Pb; and 14 ppm for Th. The time taken for determining Sc, V, Cr, Co, Ni, Cu, Zn, Rb, Sr, Y, Zr, Nb, Ba, Pb, and Th in a batch of 24 samples of komatiites, for a replication of four analyses per sample, by one operator, using a manual WDXRF spectrometer, is only 60 hours.     

高压微波消解法测定醋酸纤维过滤器采集的微尘粒子中的砷镉钴铬铜铁锰镍铅钒锌

最新的流行病学研究表明,空气中较高浓度的悬浮细颗粒可能对人类的健康有不利的影响。根据该项研究显示,由于心脏病、慢性呼吸问题和肺功能指标恶化而导致死亡率的升高与细尘粒子有关。这些研究结果已经促使欧盟于1999年4月出台了限制空气中二氧化硫、二氧化氮、氧化氮、铅和颗粒物含量的法案(1999/30/EC),对各项指标包括对可吸入PM10颗粒的浓度提出了新的限制性指标。PM10颗粒是指可以通过预分级器分离采集的气体动力学直径小于10μm的细颗粒。目前研究的兴趣重点逐步偏向PM2.5这些更细微颗粒物,PM2.5这种颗粒物对健康有明显的不利影响。在欧盟指令2008/50/EC中,对PM10和PM2.5都提     

Isotopic systematics of He,Ar, S,Cu, Ni,Re, Os,Pb, U,Sm, Nd,Rb, Sr,Lu, and Hf in the rocks and ores of the Norilsk deposits

This paper reports the first results of a study of 11 isotope systems (³He/⁴He, ⁴⁰Ar/³⁶Ar, ³⁴S/³²S, ⁶⁵Cu/⁶³Cu, ⁶²Ni/⁶⁰Ni, ⁸⁷Sr/⁸⁶Sr, ¹⁴³Nd/¹⁴⁴Nd, ^206–208Pb/²⁰⁴Pb, Hf–Nd, U–Pb, and Re–Os) in the rocks and ores of the Cu–Ni–PGE deposits of the Norilsk ore district. Almost all the results were obtained at the Center of Isotopic Research of the Karpinskii All-Russia Research Institute of Geology. The use of a number of independent genetic isotopic signatures and comprehensive isotopic knowledge provided a methodic basis for the interpretation of approximately 5000 isotopic analyses of various elements. The presence of materials from two sources, crust and mantle, was detected in the composition of the rocks and ores. The contribution of the crustal source is especially significant in the paleofluids (gas–liquid microinclusions) of the ore-forming medium. Crustal solutions were probably a transport medium during ore formation. Air argon is dominant in the ores, which indicates a connection between the paleofluids and the atmosphere. This suggests intense groundwater circulation during the crystallization of ore minerals. The age of the rocks and ores of the Norilsk deposits was determined. The stage of orebody formation is restricted to a narrow age interval of 250 ± 10 Ma. An isotopic criterion was proposed for the ore-bearing potential of mafic intrusions in the Norilsk–Taimyr region. It includes several interrelated isotopic ratios of various elements: He, Ar, S, and others.     

硅酸盐中铁、锰、钛、钙、钾、磷、硅、铝、镁、钠、锶、铷、钡的X-射线荧光光谱定量测定

本文介绍样品经四硼酸锂熔融制成玻璃小饼。采用Lachance模式和理论a系数来校正元素间的效应,由3080E型X-射线荧光谱仪和DF-350B数据处理系统完成硅酸盐中十三个项目的测定。     

硅酸盐类样品中硅、铁、铝、钛、锰、钙、镁、钾、钠和磷的x射线荧光光谱测定

本文拟定了一种以熔融法制备样片,用X射线荧光光谱测定硅酸盐类样品中Si、Fe、Al、Tj、Mn、Ca、Mg、K、Na、P等元素的分析方法。在对不同靶材X光管和分光晶体实验对比的基础上,选择了最佳的测量条件。该法具有快速、准确,测量范围广,检测限低,价格便宜等优点。经过近百个各种类型标样或管理样品的分析对比表明,本法不仅适用于硅酸盐类岩石样品的分析,还适用于铁矿、铝土矿、碳酸盐类岩矿样品以及水泥、耐火材料等样品的分析。     

Viscous, cohesive, non-Newtonian, depositing, radial slurry flow

Mining induced subsidence can significantly affect mining costs where major surface facilities and natural environment need to be protected. Overburden grout injection is a technology used to control coal mine subsidence by injecting the mine waste material extracted from the coal back into the inter-burden rock during longwall mining. The flowing slurry is here categorised as a nonlinear viscous cohesive (Bingham plastic) fluid. During longwall mining the grout slurry is pumped into the separated beds of the rock mass through a central vertical borehole, which is drilled deep into the inter-burden rock strata above the coal seam. However, a blockage can occur in the injection system when the slurry velocity falls below a certain critical threshold velocity, indicating a material phase change from cohesive-viscous to cohesive-frictional. In situ field injection tests through boreholes have been simulated at a smaller scale at the CSIRO laboratory in Brisbane by pumping the slurry through a radial disk (gap = 4 mm) from its centre. Laboratory experiments indicate a general, nonlinear, cohesive, viscous, frictional model for shear behaviour of the slurry, in which the material shear parameters are functions of the disk radial distance. Complete dimensional and dimensionless analytical solutions have been developed based on an approach related to Bingham–Herschel–Bulkley fluid mechanics. The derived formulae include relations for minimum pump pressure, local pressure and pressure gradient, wall shear stress, volume rate, velocity and velocity gradient. The theoretical results match the experimental measurements. The experiments covered slurries with maximum particle sizes of 0.5 to 2 mm with about 50% being larger than 100 µm. The viscosities at the various solids concentrations were measured with a standard torsion viscometer. This study differs from the previous research in several distinct aspects, namely, consideration of the variable shear parameters rather than fixed values, inclusion of total nonlinear behaviour, and implementation of a friction function to mimic behaviour of the deposited and consolidating stiff slurry, which can cause a significant pressure rise as a result of the increased shear resistance.     

Mountains,nations, parks,and conservation

Between 1985 and 1991, two new mountain protected areas (MTNPA) covering more than 35,000 km² and based on participatory management models — the Makalu-Barun National Park and Conservation Area, Nepal, and Qomolangma Nature Preserve, Tibet Autonomous Region — were successfully established through the collaborative efforts of Woodlands Mountain Institute and conservationists in China and Nepal. Characteristics common to both projects include the importance of establishing (1) effective rationales, (2) local support constituencies, (3) a senior advisory group, (4) a task force, (5) linkages between conservation and development, and (6) fund raising mechanisms. The lessons derived from the experiences of Woodlands Mountain Institute are of significant value to others in preserving MTNPA. Increased collaboration and communication between all interested in conservation, however, will remain a critical component for expanding mountain protected area coverage to throughout the world.     

岩石密度和超高压岩石折返速率

在常温常压条件下对中国大陆科学钻CCSD主孔100-3000米岩心样品进行了密度测量,建立了密度连续剖面,并界定了不同超高压岩石的密度值。通过对比高温高压物性实验资料,岩石密度随着退变程度增强而降低,榴辉岩密度变化序列为3.52g/cm3→3.49g/cm3→3.07g/cm3→2.93g/cm3。超高压长英质岩石密度变化序列为3.00g/cm→2.80g/cm3→2.65g/cm3。上述实验资料是讨论不同折返阶段岩石所受浮力的基础,为研究折返速率大小提供了基本参数。本文通过折返板块运动平衡时,上浮力与粘滞力平衡这一关系式,定量研究了大陆俯冲板块的折返速率,认为密度差产生上浮力从而引起折返,温度对板块折返速率的影响最为显著;密度差大小、折返角度、折返板块大小对折返速率也有直接的影响。定量模拟分析表明,在温度高于850℃时,板块的折返速率可以超过100mm/a;当温度降至700℃时,折返速率则低于1.5mm/a。作者认为在折返早期,温度较高,板块快速折返至60-70km榴辉岩相深度;随着传导散热,温度降低,板块以较慢的速率折返至中下地壳。折返速率的估算表明,浮力是板块折返第一阶段(从>100km深部折返至<40km的中下地壳)的主要驱动力。     

Regional distribution of Al,B, Ba,Ca, K,La, Mg,Mn, Na,P, Rb,Si, Sr,Th, U and Y in terrestrial moss within a 188,000 km2 area of the central Barents region: influence of geology,seaspray and human activity

Five hundred and ninety-eight samples of terrestrial moss (Hylocomium splendens and Pleurozium schreberi) collected from a 188,000 km² area of the central Barents region (NE Norway, N Finland, NW Russia) were analysed by ICP-AES and ICP-MS. Analytical results for Al, B, Ba, Ca, K, La, Mg, Mn, Na, P, Rb, Si, Sr, Th, U and Y concentrations are reported here. Graphical methods of data analysis, such as geochemical maps, cumulative frequency diagrams, boxplots and scatterplots, are used to interpret the origin of the patterns for these elements. None of the elements reported here are emitted in significant amounts from the smelting industry on the Kola Peninsula. Despite the conventional view that moss chemistry reflects atmospheric element input, the nature of the underlying mineral substrate (regolith or bedrock) is found to have a considerable influence on moss composition for several elements. This influence of the chemistry of the mineral substrate can take place in a variety of ways. (1) It can be completely natural, reflecting the ability of higher plants to take up elements from deep soil horizons and shed them with litterfall onto the surface. (2) It can result from naturally increased soil dust input where vegetation is scarce due to harsh climatic conditions for instance. Alternatively, substrate influence can be enhanced by human activity, such as open-cast mining, creation of ‘technogenic deserts’, or handling, transport and storage of ore and ore products, all of which magnify the natural elemental flux from bedrock to ground vegetation. Seaspray is another natural process affecting moss composition in the area (Mg, Na), and this is most visible in the Norwegian part of the study area. Presence or absence of some plant species, e.g., lichens, seems to influence moss chemistry. This is shown by the low concentrations of B or K in moss on the Finnish and Norwegian side of the (fenced) border with Russia, contrasting with high concentrations on the other side (intensive reindeer husbandry west of the border has selectively depleted the lichen population).