Using ichnological relationships to interpret heterolithic fabrics in fluvio-tidal settings

In fluvio-tidal settings, the sediment is dominantly derived from the river systems. However, the importance of landward tidal transport of sediment in tidally influenced sedimentary environments is difficult to assess, particularly in the rock record. This problem is addressed using two intervals within the Lower Cretaceous McMurray Formation, each representing a distinct inclined heterolithic stratification motif. The ichnological variation between the heterolithic intervals is analyzed to determine which lithosomes are associated with brackish-water (tidally influenced) colonization windows. From this, the relative fluvial influence responsible for the deposition of the fine and coarse members can be determined. Both of the inclined heterolithic stratification fabrics studied record the deposition of fluvio-tidal point bars wherein the heterolithic bedding represents variations in river discharge. The first fabric comprises inclined heterolithic stratification in which bioturbation only occurs in mudstone beds. This fabric indicates that deposition occurred in more proximal positions within a fluvio-tidal system (i.e. the outermost inner to middle estuary or distributary channels). In this example sand deposition is interpreted to represent high-energy, freshwater dune migration within a fluvial-dominated setting, whereas mud beds reflect brackish-water suspension deposition during times of low river discharge. The second fabric, which is interpreted to have developed in more distal depositional positions (i.e. the middle estuary or seaward of the turbidity maximum in deltas), consists of inclined heterolithic stratification with laminated mudstone and bioturbated sandstone. In these inclined heterolithic stratification successions the mudstone beds were deposited under the influence of freshwater and heightened sedimentation rates, whereas bioturbated sandstone was colonized under brackish-water conditions and in the presence of tidally facilitated sediment transport. In both examples, the bioturbated lithosomes are related to colonization windows that indicate the predominance at that time of marine or tidally influenced processes over fluvial processes.     

Architecture and preservation in the fluvial to marine transition zone of a mixed-process humid-tropical delta: Middle Miocene Lambir Formation,Baram Delta Province,north-west Borneo

The interaction of river and marine processes in the fluvial to marine transition zone fundamentally impacts delta plain morphology and sedimentary dynamics. This study aims to improve existing models of the facies distribution, stratigraphic architecture and preservation in the fluvial to marine transition zone of mixed-process deltas, using a comprehensive sedimentological and stratigraphic dataset from the Middle Miocene Lambir Formation, Baram Delta Province, north-west Borneo. Eleven facies associations are identified and interpreted to preserve the interaction of fluvial and marine processes in a mixed-energy delta, where fluvial, wave and tidal processes display spatially and temporally variable interactions. Stratigraphic successions in axial areas associated with active distributary channels are sandstone-rich, comprising fluvial-dominated and wave-dominated units. Successions in lateral areas, which lack active distributary channels, are mudstone-rich, comprising fluvial-dominated, tide-dominated and wave-dominated units, including mangrove swamps. Widespread mudstone preservation in axial and lateral areas suggests well-developed turbidity maximum zones, a consequence of high suspended-sediment concentrations resulting from tropical weathering of a mudstone-rich hinterland. Within the fluvial to marine transition zone of distributary channels, interpreted proximal–distal sedimentological and stratigraphic trends suggest: (i) a proximal fluvial-dominated, tide-influenced subzone; (ii) a distal fluvial-dominated to wave-dominated subzone; and (iii) a conspicuously absent tide-dominated subzone. Lateral areas preserve a more diverse spectrum of facies and stratigraphic elements reflecting combined storm, tidal and subordinate river processes. During coupled storm and river floods, fluvial processes dominated the fluvial to marine transition zone along major and minor distributary channels and channel mouths, causing significant overprinting of preceding interflood deposits. Despite interpreted fluvial–tidal channel units and mangrove influence implying tidal processes, there is a paucity of unequivocal tidal indicators (for example, cyclical heterolithic layering). This suggests that process preservation in the fluvial to marine transition zone preserved in the Lambir Formation primarily records episodic (flashy) river discharge, river flood and storm overprinting of tidal processes, and possible backwater dynamics.     

Recognition criteria,characteristics and implications of the fluvial to marine transition zone in ancient deltaic deposits (Lajas Formation,Argentina)

The seaward end of modern rivers is characterized by the interactions of marine and fluvial processes, a tract known as the fluvial to marine transition zone, which varies between systems due to the relative strength of these processes. To understand how fluvial and tidal process interactions and the fluvial to marine transition zone are preserved in the rock record, large‐scale outcrops of deltaic deposits of the Middle Jurassic Lajas Formation (Neuquén Basin, Argentina) have been investigated. Fluvial–tidal indicators consist of cyclically distributed carbonaceous drapes in unidirectional, seaward‐oriented cross‐stratifications, which are interpreted as the result of tidal modulation of the fluvial current in the inner part of the fluvial to marine transition zone. Heterolithic deposits with decimetre‐scale interbedding of coarser‐grained and finer‐grained facies with mixed fluvial and tidal affinities are interpreted to indicate fluvial discharge fluctuations (seasonality) and subordinate tidal influence. Many other potential tidal indicators are argued to be the result of fluvial–tidal interactions with overall fluvial dominance or of purely fluvial processes. No purely tidal or tide‐dominated facies were recognized in the studied deposits. Moreover, fluvial–tidal features are found mainly in deposits interpreted as interflood (forming during low river stage) in distal (delta front) or off‐axis (interdistributary) parts of the system. Along major channel axes, the interpreted fluvial to marine transition zone is mainly represented by the fluvial‐dominated section, whereas little or no tide‐dominated section is identified. The system is interpreted to have been hyposynchronous with a poorly developed turbidity maximum. These conditions and the architectural elements described, including major and minor distributary channels, terminal distributary channels, mouth bars and crevasse mouth bars, are consistent with an interpretation of a fluvial‐dominated, tide‐influenced delta system and with an estimated short backwater length and inferred microtidal conditions. The improved identification of process interactions, and their preservation in ancient fluvial to marine transition zones, is fundamental to refining interpretations of ancient deltaic successions.     

Recognition of strong seasonality and climatic cyclicity in an ancient,fluvially dominated,tidally influenced point bar: Middle McMurray Formation,Lower Steepbank River,north‐eastern Alberta,Canada

Inclined heterolithic stratification in the Lower Cretaceous McMurray Formation, exposed along the Steepbank River in north‐eastern Alberta, Canada, accumulated on point bars of a 30 to 40 m deep continental‐scale river in the fluvial–marine transition. This inclined heterolithic stratification consists of two alternating lithologies, sand and fine‐grained beds. Sand beds were deposited rapidly by unidirectional currents and contain little or no bioturbation. Fine‐grained beds contain rare tidal structures, and are intensely bioturbated by low‐diversity ichnofossil assemblages. The alternations between the sand and fine‐grained beds are probably caused by strong variations in fluvial discharge; that are believed to be seasonal (probably annual) in duration. The sand beds accumulated during river floods, under fluvially dominated conditions when the water was fresh, whereas the fine‐grained beds accumulated during the late stages of the river flood and deposition continued under tidally influenced brackish‐water conditions during times of low‐river flow (i.e. the interflood periods). These changes reflect the annual migration in the positions of the tidal and salinity limits within the fluvial–marine transition that result from changes in river discharge. Sand and fine‐grained beds are cyclically organized in the studied outcrops forming metre‐scale cycles. A single metre‐scale cycle is defined by a sharp base, an upward decrease in sand‐bed thickness and upward increases in the preservation of fine‐grained beds and the intensity of bioturbation. Metre‐scale cycles are interpreted to be the product of a longer term (decadal) cyclicity in fluvial discharge, probably caused by fluctuations in ocean or solar dynamics. The volumetric dominance of river‐flood deposits within the succession suggests that accumulation occurred in a relatively landward position within the fluvial–marine transition. This study shows that careful observation can reveal much about the interplay of processes within the fluvial–marine transition, which in turn provides a powerful tool for determining the palaeo‐environmental location of a deposit within the fluvial–marine transition.     

Unincised fluvial and tide-dominated estuarine systems from the Mesoproterozoic Lower Tombador Formation,Chapada Diamantina basin,Brazil

The Mesoproterozoic Lower Tombador Formation is formed of shallow braided fluvial, unconfined to poorly-channelized ephemeral sheetfloods, sand-rich floodplain, tide-dominated estuarine, and shallow marine sediments. Lowstand braided fluvial deposits are characterized by a high degree of channel amalgamation interbedded with ephemeral, intermediate sheetflood sandstones. Sand-rich floodplain sediments consist of intervals formed by distal sheetflood deposits interbedded with thin layers of eolian sandstones. Tide-dominated estuarine successions are formed of tide-influenced sand-bed braided fluvial, tidal channel, tidal sand flat and tidal bars. Shallow marine intervals are composed of heterolithic strata and tidal sand bars. Seismic scale cliffs photomosaics calibrated with vertical sections indicate high lateral continuity of sheet-like depositional geometry for fluvial–estuarine successions. These geometric characteristics associated with no evidence of incised-valley features nor significant fluvial scouring suggest that the Lower Tombador Formation registers deposition of unincised fluvial and tide-dominated systems. Such a scenario is a natural response of the interplay between sedimentation and fluctuations of relative sea level on the gentle margins of a sag basin. This case study indicates that fluvial–estuarine successions exhibit the same facies distributions, irrespective of being related to unincised or incised-valley systems. Moreover, this case study can serve as a starting point to better understand the patterns of sedimentation for Precambrian basins formed in similar tectonic settings.     

Quartzite development in early Palaeozoic nearshore marine environments

Quartzites are especially characteristic of Proterozoic and Cambro‐Ordovician shallow marine strata, whereas equivalent age fluvial deposits are commonly arkosic. The absence of land vegetation in the pre‐Silurian influenced weathering processes and styles of fluvial deposition. It may also have had an impact on shallow marine sedimentation. Two field studies from the English Channel region are presented to investigate the processes leading to quartzite formation. On Alderney, nearshore marine and fluvial facies occur interbedded on a metre scale and are interpreted to represent deposition on the lower reaches of an alluvial plain, and in beach and upper shoreface environments. The marine and fluvial sandstones display marked differences in textural and mineralogical maturity, pointing to a process of sediment maturation by the destruction of feldspar and labile grains at the shoreline. At Erquy, fully mature, marine quartzites occur bounded above and below by alluvial deposits via sharp or erosional surfaces, and are interpreted to represent high energy, storm and tidally influenced lower shoreface and inner shelf deposits. A model for quartzite development is proposed where, under a cool climate, frequent storms in un‐vegetated, tectonically rejuvenated uplands provided an abundance of arkosic sand to fluvial basins and clastic shorelines. The model proposes that the marine basins were subject to high wave energies, frequent storm events and tidal currents. These were conditions conducive to transforming arkosic sand to quartz‐rich sand by the attrition of feldspar at the shoreline and in the shallow marine environment. On sediment burial, further feldspar destruction occurred during diagenesis. The proposed model highlights the potential for a step change in sediment maturity to occur at the shoreline in early Palaeozoic depositional systems tracts.     

Abandoned channel fill sequences in the tidal estuary of a small mountainous,dry‐summer river

This study proposes a modification of the current model for abandoned channel fill stratigraphy produced in unidirectional flow river reaches to incorporate seasonal tidal deposition. Evidence supporting this concept came from a study of two consecutive channel abandonment sequences in Ropers Slough of the lower Eel River Estuary in northern California. Aerial photographs showed that Ropers Slough was abandoned around 1943, reoccupied after the 1964 flood, and abandoned again in 1974 with fill continuing to the present. Planform geomorphic characteristics derived from these images were used in conjunction with sub‐centimetre resolution stratigraphic analyses to describe depositional processes and their resultant sedimentary deposits. Both abandonment sequences recorded quasi‐annual scale fluvial/tidal deposition couplets. In both cases, tidal deposits contained very little sand, were higher in organic and inorganic carbon content than the sandier, fluvially dominated deposits, and possessed millimetre‐scale horizontal laminations. The two abandonment fills differed significantly in terms of the temporal progression of channel narrowing and fluvial sediment deposition characteristics. Aerial photographic analysis showed that the first abandonment sequence led to a more rapid narrowing of Ropers Slough and produced deposits with a positive relationship between grain size/deposit thickness and discharge. The second abandonment resulted in a much slower narrowing of Ropers Slough and generally thinner fluvial deposits with no clear relationship between grain size/deposit thickness and discharge. The δ¹³C values and organic nitrogen to organic carbon ratios of deposits from the first phase overlapped with Eel River suspended sediment characteristics found for low flows (one to five times mean discharge), while those of the second phase were consistent with suspended sediment from higher flows (seven to ten times mean discharge). When considered together, the results indicate that the early fill sequence recorded a reach experiencing regular fluvial deposition through flow conditions during the wet season, while the latter fill sequence records a reach more disconnected from the main stem in terms of flow and sediment. The major factor affecting the difference in sedimentation between the two fill periods appears to have been the morphology of the upstream river bend in relation to the position of the bifurcation node. During the first fill period, the upstream entrance to Ropers Slough seems to have remained open, in part due to the placement of its entrance on the outside of the mainstem river bend, and despite stronger tidal effects caused by a larger tidal prism and closer proximity to the tidal inlet. By the second fill sequence, the upstream bend morphology had altered, placing the entrance to Ropers Slough on the inner bank of the mainstem bend, which resulted in more rapid plug bar formation. The role of tidal effects in the geomorphic trajectory of the two abandonment sequences is unclear, but appears to have been less important than local bifurcation geometry.     

Tidal influence in Cretaceous fluvial strata from Utah, USA: a key to sequence stratigraphic interpretation

Detailed models already exist that outline physical and temporal relationships in marine and marginal marine strata. Such models are still in their infancy in alluvial deposits. Recognition of tidal and estuarine influence in fluvial strata is critical to the development of high resolution sequence stratigraphic correlations between marine and non-marine strata. Strata that have previously been interpreted as low energy meandering river deposits contain sedimentary and biogenic structures that suggest a tidal influence. These structures include sigmoidal bedding, paired mud/silt drapes, wavy and lenticular bedding, shrinkage cracks, multiple reactivation surfaces, inclined heterolithic strata, complex compound cross-beds, bidirectional cross-beds, and trace fossils including Teredolites, Arenicolites and Skolithos. Although none of these structures is unique to tidal processes, the preponderance of data suggests that fluvial systems have been affected by tidal processes well inland of coeval shoreline deposits. These deposits rarely form a significant proportion of a depositional sequence; however, their occurrence allows time significant surfaces to be extended for tens or even hundreds of kilometres inland from coeval shoreline deposits. In Turonian through Campanian strata exposed in the Kaiparowits Plateau of southern Utah, tidally influenced facies are recognized within at least two distinct stratigraphic levels that were deposited during periods of relatively rapid base level rise. These strata form part of an alluvial transgressive systems tract. Landward of each of the marine transgressive maxima, tidal facies are present in fluvial channels that are completely encased in non-marine strata at distances up to 65 km inland from a coeval palaeoshoreline. Our work suggests that such deposits may have gone unrecognized in the past, but they form a significant component of alluvial strata in many depositional sequences. Although these tidally influenced fluvial deposits may be difficult to recognize, they are temporally equivalent to marine maximum flooding surfaces and provide a chronostratigraphic correlation between alluvial and nearshore marine deposits.     

Using a modern analogue to interpret depositional position in ancient fluvial-tidal channels: Example from the McMurray Formation,Canada

The fluvial–tidal transition (FTT) is a complex depositional zone, where fluvial flow is modified by tides as rivers approach a receiving marine basin. Variations in the relative importance of tidal versus fluvial processes lead to a distinctive distribution of sediments that accumulate on channel bars. The FTT generally consists of three broad zones: (1) a freshwater-tidal zone; (2) a tidally influenced freshwater to brackish-water transition; and (3) a zone of relatively sustained brackish-water conditions with stronger tides. A very common type of deposit through the fluvial–tidal transition, especially on the margins of migrating channels, is inclined heterolithic stratification (IHS). At present, a detailed account of changes in the character of IHS across the FTT of a paleo-channel system has not been reported, although a number of modern examples have been documented. To fill this gap, we quantitatively assess the sedimentology and ichnology of IHS from seven cored intervals in three geographic areas situated within the youngest paleovalley (“A” Valley) in the Lower Cretaceous McMurray Formation of Alberta, Canada. We compare the data to trends defined along the FTT in the present-day Fraser River in British Columbia, Canada to interpret paleo-depositional position in the ancient fluvial–tidal channels.Analysis determined that the mean mudstone thickness is 8.2 cm in the southern study area (SA). Mean thickness increases to 11 cm in the central study area (CA), and decreases again to 4.4 cm in the northern study area (NA). The proportion of mudstone is 31% in SA, 44% in CA, and 27% in NA. Thickness-weighted mean bioturbation intensity in sands varied from 0.29 in SA and CA, to 0.28 in NA. On the other hand, thickness-weighted mean bioturbation intensity (BI) in mudstone increases from 1.46 in SA, to 1.77 in CA, and is 1.94 in NA. The ichnological diversity also increased from south to north.Sedimentological results show similar trends to those of the Fraser River, enabling the identification of a freshwater to brackish-water transition zone with tidal influence. The interpreted position of the transition is underpinned by the bioturbation intensity and trace-fossil diversity trends, indicating periodic brackish-water conditions throughout SA in the McMurray Formation during low river flow conditions. Together, these data suggest that a broad FTT existed in the “A” Valley, with fluvial-dominated channels to the south that experienced seasonal brackish-water inundation during base flow, and channels experiencing increasing brackish-water influence lying further north towards a turbidity maximum zone. The FTT zone appears to have extended for several hundred kilometers from south to north.Based on the sedimentological and ichnological data, as well as estimations of lateral accretion rates, we refute the commonly applied Mississippi River depositional analogue for McMurray Formation channels. Rather, we show that while not a perfect fit, the tidally influenced Fraser River shows much greater agreement with the depositional character recorded in McMurray Formation IHS. Future work on the McMurray system should focus on characterizing tide-dominated deltaic and estuarine systems, such as the Ganges-Brahmaputra, and on forward-modeling the evolution of tide-dominated and tide-influenced river systems.     

Early Triassic intertidal/subtidal patterns of sedimentation along the southern margins of the Tethyan seaway,Jordan

The early Triassic Dardur Formation, exposed along the northeastern margin of the Dead Sea area, comprises some 63 m of siliciclastic and carbonate rocks, arranged in two coarsening-upward sequences. Each sequence begins with a heterolithic facies (silty shale dolomite and marlstone) and terminates with a sandstone facies.The occurrence of mixed carbonate-dominated clastic coarsening-upward facies sequences, containing pelecypode and ostracode fossils and trace fossils is attributed to deposition in a tidally-dominated environment. Bedload traction transport was responsible for deposition of the sandstone facies in a permanently submerged, shallow subtidal zone, whereas the presence of small scale interference oscillation ripple marks, tidal rhythmites and mudcracks in the heterolithic facies indicate deposition under more fluctuating intertidal conditions.The organization of heterolithic and sandstone into vertically-stacked, coarsening-upward marine facies sequences is attributed to a deepening-upward trend from intertidal to subtidal conditions, in response to a series of minor local transgressions and regressions along the southern margins of the Tethyan seaway during early Triassic times.     

Sea-level fluctuations and the geometric variability of tide-dominated sandbodies

This paper presents examples of various large tidal sandbodies from the Eocene Roda Sandstone in the southern Pyrenees and the Late Pleistocene and Early Holocene in the East China Sea. An attempt is made to summarize the geometric variability of these large tidal sandbodies in relation to the sediment supply and tidal discharge of the depositional system. Transverse sand bars were developed in low-sinuosity, high-gradient channels with high influxes of coarse sediments and water from fluvial systems. Tidal point bars were formed in meandering low-gradient estuarine channel where tidal influence was stronger and sediment was finer than those of the transverse sand bar. A tidal delta complex was built up at the estuary mouth with an abundant sediment supply and an increased tidal discharge. Tidal sand ridges were formed when relict fluvial or deltaic sands were eroded and reworked by strong tidal currents during subsequent sea-level rise.

Since the sediment supply and the tidal discharge of the depositional system were closely related to the eustatic sea-level change and basin subsidence, i.e. the relative sea-level change, special attention will be given to the relationship between geometric variability of tidal sandbodies and the sequence stratigraphic framework in which various sandbodies occurred. Three orders of eustatic sea-level fluctuations can be recognized. The third-order eustatic sea-level cycle, together with basin subsidence, controlled the development of systems tracts and the occurrence of different tidal sandbodies, such as estuary and tidal flat facies during the late stage of a LSW systems tract (type 1 sequence) or a SM systems tract (type 2 sequence); tidal point bar facies, tidal delta facies or tidal sand-ridge facies during a TR systems tract; estuary facies during an early HS systems tract; and fluvial sand bar facies in a late HS systems tract and the early stage of a SM or LSW systems tract. There are also the fourth-order and fifth-order eustatic fluctuations, which are superimposed on the third-order eustatic changes and have important control on the build-up, abandonment and preservation of composite and single tidal sandbodies, respectively.

Since the deposition of tidal sandbodies is very sensitive to eustatic sea-level changes, recognition of various tidal sandbodies is important in sequence stratigraphy analyses of sedimentary basins and in the facies prediction of clastic sediments in basin modelling.     

Composition and mineralogy of suspended sediment in the fluvio-estuarine zone of the Loire River, France

The fluvio-tidal transition of suspended sediment in terms of mineralogy and composition in the Loire River drainage basin, the largest French river basin, was investigated in the fluvial zone at Montjean and in the tidal zone at Mauves-Thouaré, for a complete seasonal cycle. At Montjean, where the river experiences unidirectional flow, the composition and mineralogy (especially clays and clay minerals) of river suspended material (RSM) are governed by the river discharge, upstream contributions, climatic conditions and microbiological activities. However, due to reversing tidal and river currents at Thouaré, in the zone of tidal dynamics, these relations are changed. In the downstream direction sand and clay content in the RSM decrease while the silt content increases. Among clay minerals, between these two observation stations, montmorillonite remains constant, kaolinite diminishes, and the other minerals increase downstream. Combustible material (organic) and nitrate (NO₃) contents in the RSM increase whereas the phosphate (PO₄^3-) and CaCO₃ contents decline considerably during transport. At the head of the tidal zone, where the river flow encounters the tidal influence, there is a relatively stationary water mass (tidal slack) where sands, clays, phosphate, carbonate and silica are deposited by physical and chemical processes. Physical sedimentation takes place by simple gravitational deposition (sands), and by sorting and complicated differential settling (clays); chemical sedimentation takes place by precipitation (calcite-CaCO₃; apatite-Ca₅ (PO₄)³ (OH,F,Cl); coagulation of dissolved silica-SiO₂) in connection with seasonal algal bloom and eutrophic events.     

Origin and significance of mud-filled incised valleys (Upper Cretaceous) in southern Alberta, Canada

Seven mud-filled incised valleys (MFIVs) in the paralic facies of the Dinosaur Park and Horseshoe Canyon formations (Upper Cretaceous) of southern Alberta were studied to better understand their morphology, geometry and depositional histories in an estuarine context. Two preservational geometries occur: simple, U-shaped forms; and internally complex forms. Both types of MFIV record deposition in the central zone of low energy (turbidity) in an estuarine setting. Simple, U-shaped MFIVs have sharp basal erosional surfaces and consist of mudstone-dominated heterolithic fills of channel-wide, concave-up laminae. Associated fossil assemblages are marine to brackish. Each simple MFIV records a cut-and-fill history associated with a cycle of relative sea-level drop and rise. Low-energy depositional settings, loss of channel form during infilling, and associated shoreface deposits, as well as the absence of clear tidal indicators suggest a coastal plain estuarine setting, along a wave-dominated, barred coastline. Complex MFIVs are rarer, and consist of imbricated, wedge-shaped sets of inclined-to-horizontal heterolithic strata. Tidal deposits and/or nonmarine-to-marine macrofossils occur locally. Complex MFIVs were infilled in meandering reaches of the central zone of low energy in tide-dominated estuaries. Their rarity compared to simple MFIVs and their freshwater palaeontological content suggest that they were contiguous landward with extensive fluvial channels. A complex MFIV near Onefour comprises three in-channel depositional cycles. Each cycle consists of an erosional surface overlain by lateral accretion bedding and a conformable transition to vertically aggraded strata. Each cycle reflects a cut-and-fill event under the control of changes in relative sea-level that culminated in overbank flooding. All MFIVs formed in low-gradient settings (≤0.03%) where estuarine zones were stretched out over many tens of kilometres. Tide-dominated estuaries apparently exhibited simple, straight-to-meandering upstream transitions and extensive landward penetration (≥200 km) of tidal backwater effects. Few modern estuaries serve as adequate modern analogues to these ancient, tide-dominated estuaries. Radiometric data indicate that MFIV cut-and-fill cycles were 100 000-400 000 years in maximum duration and thus, equivalent to 4th order sea-level cycles. However, negative evidence tentatively suggests that these cycles took place over time intervals 1-2 orders of magnitude smaller (5th order or higher sea-level cycles).     

The applicability of modern tidal analogues to pre‐vegetation paralic depositional models

In modern siliciclastic environments terrestrial and aquatic vegetation binds substrate, controls weathering and erosion rates, influences run‐off, sediment supply and subsequent depositional architecture. This study assesses the applicability of modern depositional models that are impacted by vascular vegetation, as analogues for ancient pre‐land plant systems. A review of pre‐Devonian published literature demonstrates a paucity of described tidal successions; this is possibly due to the application of modern analogues for interpreting the record when there is a lack of tidal indicators. This paucity suggests a need for revised models of tidal deposition that consider the different environmental conditions prior to land plant evolution. This study examines the Ordovician–Silurian Tumblagooda Sandstone, which is exposed in the gorge of the Murchison River and coastal cliffs near Kalbarri, Western Australia. The Tumblagooda Sandstone comprises stacked sand‐rich facies, with well‐preserved bedforms and trace fossils. Previous interpretations of the depositional setting have proposed from a mixed sheet‐braided fluvial and intertidal flats; to a continental setting dominated by fluvial and aeolian processes. An enigmatic element is the rarity of mud‐rich facies preserved in the succession. Outcrop logging, facies and petrographic analysis record dominantly shallow water conditions with episodes of emergence. Abundant ichnotaxa indicate that marine conditions and bi‐directional flow structures are evidence for an intertidal and subtidal depositional environment. A macrotidal estuary setting is proposed, with evidence for tidal channels and repeated fluvial incursions. Physical and biogenic sedimentary structures are indicative of tidal conditions. The lack of clay and silt resulted in the absence of flaser or lenticular‐bedding. Instead cyclic deposition of thin beds and foreset bioturbation replaced mud drape deposits. Higher energy conditions prevailed in the absence of the binding activity of plants in the terrestrial and marine realm. This is suggestive of different weathering processes and a reduction in the preservation of some sedimentary features.     

Depositional facies and the sequence stratigraphic control of a mixed-process influenced clastic wedge in the Cretaceous Western Interior Seaway: The Gallup System,New Mexico,USA

Depositional facies have been hypothesized to be linked to sequence stratigraphic positions. Also, shoreline systems are built by mixed processes, including rivers, storms, fair-weather waves and tides. Resolving the complexity of shoreline deposition requires detailed quantitative facies analysis with particular attention to heterolithic successions. In this study, 71 sections in a 130 km long outcrop belt of the Cretaceous Gallup Formation in the north-west of the San Juan Basin were measured. Five major facies associations were identified using sedimentological and iconological interpretations, including offshore shelf, non-deltaic shoreline sandstones, deltas, coastal bayline and fluvial. Each facies association also comprises subordinate facies. Depositional facies interpretations are placed in a high-resolution sequence stratigraphic framework that allows for reconstructions of the palaeogeography of individual parasequence sets that demonstrate temporal and spatial evolution of facies associations and depositional processes. The results show that the Gallup is a mixed-process-controlled depositional system with fair-weather and storm-wave dominance, river influence and tide-effect, contrasting with previous interpretations of a solely fair-weather wave-dominated environment. Depositional processes and the resultant facies change with sequence stratigraphic positions in response to relative sea-level changes – particular facies are only deposited in certain systems tracts. Distinction and transition between non-deltaic shorefaces and wave-dominated deltas have also been documented in this study. Non-deltaic shorefaces are characterized by homogeneous sandstones with a wide-range bioturbation index and the absence of mudstones. Wave-dominated deltas are subject to river influence and contain prodelta facies. This study shows the importance of detailed facies analysis with high-resolution sequence stratigraphic control using outcrops for documenting sedimentary processes of shallow marine shoreline systems.     

长江口沉积物~(210)Pb分布及沉积环境解释

在长江河口潮滩、分流河道和水下三角洲共获得18个柱样,进行沉积学分析和210Pb测定,并对其中6根柱样进行137Cs测定。经研究发现,长江口外在水深25～30m,122°30′N,31°00′E附近存在一个泥质沉积中心,沉积速率达2.0～6.3cm/yr。另外,在潮滩和涨潮槽也获得较高沉积速率,其中南汇和横沙岛潮滩沉积速率(1.03～1.94cm/yr)高于崇明东滩(0.51～0.76cm/yr),涨潮槽沉积速率也达0.86cm/yr。此外,在石洞口、南汇、九段沙潮滩和三角洲前缘有部分柱样未获沉积速率,推测为沉积环境不稳定或沉积速率过快所致。     

Controls on sedimentation in distal margin palaeovalleys in the Early Tertiary Alpine foreland basin, south-eastern France

The influence of palaeodrainage characteristics, palaeogeography and tectonic setting are rarely considered as controls on stratigraphic organization in palaeovalley or incised valley systems. This study is an examination of the influence of source region vs. downstream base level controls on the sedimentary architecture of a set of bedrock-confined palaeovalleys developed along the distal margin of the Alpine foreland basin in south-eastern France. Three distinct facies associations are observed within the palaeovalley fills. Fluvial facies association A is mainly dominated by poorly sorted, highly disorganized, clast-to-matrix-supported cobble-to-boulder conglomerates that are interpreted as streamflood deposits. Facies association B comprises mainly yellow siltstones and is interpreted as recording deposition in an estuarine basin environment. Estuarine marine facies association C comprises interstratified estuarine siltstones and clean, well-sorted washover sandstones. The sedimentary characteristics of the valley fill successions are related to the proximity of depositional sites to sediment source areas. Palaeovalleys located proximal to structurally controlled basement palaeohighs are entirely dominated by coarse fluvial streamflood deposits. In contrast, distal palaeovalley segments, which are located several kilometres downstream, contain successions showing upward transition from coarse fluvial facies into estuarine central basin fines, and finally into estuarine-marginal marine facies. Facies distributions suggest that the fluvial deposits form wedge-shaped, downstream-thinning sediment bodies, whereas the estuarine deposits form an upstream-thinning wedge. The vertical stacking of fluvial to estuarine to marginal marine depositional environments records the fluvial aggradation and subsequent transgression of relatively small bedrock-confined river valleys, which drained a rugged, upland terrain. Facies geometries suggest that a fluvial sediment wedge initially prograded downvalley, in response to high bed load sediment yields. Subsequently, palaeovalleys became drowned during the passage of a marine transgression, with the establishment of estuarine conditions. Initial fluvial aggradation and subsequent marine flooding of the palaeovalleys is a consequence of the interaction of high local rates of sediment supply and relative sea-level rise driven by flexural subsidence of the basin.     

Facies and sand-body geometry of the Queen City (Eocene) tide-dominated delta-margin embayment, NW Gulf of Mexico Basin

The Queen City Formation (Eocene) displays an array of tide-dominated coastal facies in the Tyler Basin of the northern Gulf of Mexico. This facies assemblage, which is atypical of the microtidal, wave-dominated, coastal depositional complexes that characterize the Cenozoic Gulf basin, reflects tidal amplification in a generally protected embayment on the east flank of a strongly prograded delta system. The shallow embayment was confined to the east by contemporaneous uplift and shoaling across the Sabine Uplift. Fluvial, barrier (including ebb tidal delta), heterolithic tidal, estuary-fill, and tidal point-bar facies are all found at outcrop. These facies were projected into the three-dimensional geometry of the tide-dominated depositional complex. Inlet, estuary, and distributary-fill sand bodies, which are linear and diporientated, dominate lithofacies maps. The Queen City facies assemblage in the Tyler Basin records a mixture of mesotidal to macrotidal environments that were interspersed in time and space with fluvial-dominated lobes, which periodically prograded eastward from the deltaic depocentre into the flanking embayment. Queen City deposition terminated with regional marine flooding and deposition of glauconitic, fossiliferous shelf sands and muds of the Weches Formation. Transgression is marked by a prominent ravinement surface that truncates underlying facies of the tide-dominated shore zone.     

The upper Hawkesbury River, New South Wales, Australia: a Holocene example of an estuarine bayhead delta

Holocene deposits of the Hawkesbury River estuary, located immediately north of Sydney on the New South Wales coast, record the complex interplay between sediment supply and relative sea-level rise within a deeply incised bedrock-confined valley system. The present day Hawkesbury River is interpreted as a wave-dominated estuarine complex, divisible into two broad facies zones: (i) an outer marine-dominated zone extending 6 km upstream from the estuary mouth that is characterized by a large, subtidal sandy flood-tidal delta. Ocean wave energy is partially dissipated by this flood-tidal delta, so that tidal level fluctuations are the predominant marine mechanism operating further landward; (ii) a river-dominated zone that is 103 km long and characterized by a well developed progradational bayhead delta that includes distributary channels, levees, and overbank deposits. This reach of the Hawkesbury River undergoes minor tidal level fluctuations and low fluvial runoff during baseflow conditions, but experiences strong flood flows during major runoff events. Fluvial deposits of the Hawkesbury River occur upstream of this zone. The focus of this paper is the Hawkesbury River bayhead delta. History of deposition within this delta over the last c. 12 ka is interpreted from six continuous cores located along the upper reaches of the Hawkesbury River. Detailed sedimentological analysis of facies, whole-core X-ray analysis of burrow traces and a chronostratigraphic framework derived from 10 C-14 dates reveal four stages of incised-valley infilling in the study area: (1) before 17 ka BP, a 0–1 m thick deposit of coarse-grained fluvial sand and silt was laid down under falling-to-lowstand sea level conditions; (2) from 17 to 6·5 ka BP, a 5–10 m thick deposit composed of fine-grained fluvial sand and silt, muddy bayhead delta and muddy central-basin deposits developed as the incised valley was flooded during eustatic sea-level rise; (3) during early highstand, between 6·5 and 3 ka BP, a 3–8 m thick bed of interbedded muddy central-basin deposits and sandy river flood deposits, formed in association with maximum flooding and progradation of sandy distributary mouth-bar deposits commenced; (4) since 3 ka BP, fluvial deposits have prograded toward the estuary mouth in distributary mouth-bar, interdistributary-bay and bayhead-delta plain environments to produce a 5–15 m thick progradational to aggradational bayhead-delta deposit. At the mouth of the Hawkesbury estuary subaqueous fluvial sands interfinger with and overlie marine sands. The Hawkesbury River bayhead-delta depositional succession provides an example of the potential for significant variation of facies within the estuarine to fluvial segment of incised-valley systems.     

The fluviolagoonal palaeoenvironment in the Rhine/Meuse deltaic plain

Detailed lithostratigraphical, palynological and ¹⁴C analyses have served to reconstruct the palaeoenvironment during two main, mid-Holocene, regional phases of increased fluvial clay and sand deposition in the Rhine/Meuse deltaic plain. The investigated location lies in a broad area transitional to the upstream fluviatile and the downstream marine (lagoon/tidal flat) deposition zones. The palaeoenvironment appears to have been extensive, permanent open water intersected by the wooded natural levees of many small river channels. The term fluviolagoon is proposed for this typical environment, as illustrated here by three-dimensional oblique landscape drawings. A present-day example is found in the Magdalena river deltaic plain, Colombia.