Lake Hoare, Antarctica: sedimentation through a thick perennial ice cover

Lake Hoare in the Dry Valleys of Antarctica is covered with a perennial ice cover more than 3 m thick, yet there is a complex record of sedimentation and of growth of microbial mats on the lake bottom. Rough topography on the ice covering the lake surface traps sand that is transported by the wind. In late summer, vertical conduits form by melting and fracturing, making the ice permeable to both liquid water and gases. Cross-sections of the ice cover show that sand is able to penetrate into and apparently through it by descending through these conduits. This is the primary sedimentation mechanism in the lake. Sediment traps retrieved from the lake bottom indicate that rates of deposition can vary by large amounts over lateral scales as small as 1 m. This conclusion is supported by cores taken in a 3 × 3 grid with a spacing of 1.5 m. Despite the close spacing of the cores, the poor stratigraphic correlation that is observed indicates substantial lateral variability in sedimentation rate. Apparently, sand descends into the lake from discrete, highly localized sources in the ice that may in some cases deposit a large amount of sand into the lake in a very short time. In some locations on the lake bottom, distinctive sand mounds have been formed by this process. They are primary sedimentary structures and appear unique to the perennially ice-covered lacustrine environment. In some locations they are tens of centimetres high and gently rounded with stable slopes; in others they reach ～ 1 m in height and have a conical shape with slopes at angle of repose. A simple formation model suggests that these differences can be explained by local variations in water depth and sedimentation rate. Rapid colonization and stabilization of fresh sand surfaces by microbial mats composed of cyanobacteria, eukaryotic algae, and heterotrophic bacteria produces a complex intercalation of organic and sandy layers that are a distinctive form of modern stromatolites.     

Propagation of the Storegga tsunami into ice‐free lakes along the southern shores of the Barents Sea

Deposits in coastal lakes in northernmost Norway reveal that the Storegga tsunami propagated well into the Barents Sea ca. 8100–8200 years ago. A tsunami deposit – found in cores from five coastal lakes located near the North Cape in Finnmark – rests on an erosional unconformity and consists of graded sand layers and re‐deposited organic remains. Rip‐up clasts of lake mud, peat and soil suggest strong erosion of the lake floor and neighbouring land. Inundation reached at least 500 m inland and minimum vertical run‐up has been reconstructed to 3–4 m. In this part of the Arctic coastal lakes are usually covered by >1 m of solid lake ice in winter. The significant erosion and deposition of rip‐up clasts indicate that the lakes were ice free and that the ground was probably not frozen. We suggest that the Storegga slide and ensuing tsunami happened sometime in the summer season, between April and October. Copyright © 2011 John Wiley & Sons, Ltd.     

Large tufa mounds,Searles Lake,California

Mounds that have formed around spring vents occur in a variety of environmental settings, many at sites generally difficult or inaccessible for sampling. In contrast, over 500 tufa mounds occur in the dry bed of Searles Lake, California. The mounds range from minor features to 45 m in height; most are 5 to 12 m high. These mounds, composed of calcite and aragonite, formed associated with spring vents in the Pleistocene lake bottom. Thus, analyses of these mounds in Searles Lake provide a model with regard to the origin and architecture of tufa mounds. The mounds consist of four distinctive tufa facies. The initial deposits consist of porous tufa, including the innermost (porous 1) and the outermost (porous 2) deposits, followed by nodular tufa, then columnar tufa, and laminated crusts. There are two simple sequences of tufa deposition. The first sequence is from porous 1 to nodular to laminated crusts and, finally, to porous 2. A second sequence consists of: porous 1 to columnar to laminated crusts and, lastly, to porous 2. Facies changes are a response to changes in environmental conditions from deep water (porous 1 facies) to an essentially dry lake phase (during and after the formation of laminated crusts facies), to deep water (porous 2 facies) and, at the present time, totally dry. The primary constituents that comprise the tufa deposits include thin laminae, pisoids, spherulites, peloids and stromatolite‐like crusts. On the microscopic scale, these constituents dominantly make up nano‐spheres, micro‐rods and rod‐like crystals, as well as other calcified bodies. These constituents are interpreted to be the calcified remains of bacterial bodies. These findings suggest that microbial participation in the construct of other mounds should be a major concern of investigation, both for terrestrial and extraterrestrial spring‐fed mounds.     

Sedimentological and deformational criteria for discriminating subglaciofluvial deposits from subaqueous ice‐contact fan deposits: A Pleistocene example (Ireland)

A pit located near Ballyhorsey, 28 km south of Dublin (eastern Ireland), displays subglacially deposited glaciofluvial sediments passing upwards into proglacial subaqueous ice‐contact fan deposits. The coexistence of these two different depositional environments at the same location will help with differentiation between two very similar and easily confused glacial lithofacies. The lowermost sediments show aggrading subglacial deposits indicating a constrained accommodation space, mainly controlled by the position of an overlying ice roof during ice‐bed decoupling. These sediments are characterized by vertically stacked tills with large lenses of tabular to channelized sorted sediments. The sorted sediments consist of fine‐grained laminated facies, cross‐laminated sand and channelized gravels, and are interpreted as subglaciofluvial sediments deposited within a subglacial de‐coupled space. The subglaciofluvial sequence is characterized by glaciotectonic deformation structures within discrete beds, triggered by fluid overpressure and shear stress during episodes of ice/bed recoupling (clastic dykes and folds). The upper deposits correspond to the deposition of successive hyperpycnal flows in a proximal proglacial lake, forming a thick sedimentary wedge erosively overlying the subglacial deposits. Gravel facies and large‐scale trough bedding sand are observed within this proximal wedge, while normally graded sand beds with developed bedforms are observed further downflow. The building of the prograding ice‐contact subaqueous fan implies an unrestricted accommodation space and is associated with deformation structures related to gravity destabilization during fan spreading (normal faults). This study facilitates the recognition of subglacial/submarginal depositional environments formed, in part, during localized ice/bed coupling episodes in the sedimentary record. The sedimentary sequence exposed in Ballyhorsey permits characterization of the temporal framework of meltwater production during deglaciation, the impact on the subglacial drainage system and the consequences on the Irish Sea Ice Stream flow mechanisms.     

Tepee-shaped agglutinated microbialites: an example from a Famennian carbonate platform on the Lennard Shelf, northern Canning Basin, Western Australia

Distinctive, metre‐scale antiformal structures are well developed in a Famennian carbonate platform in the Chedda Cliffs area of the Lennard Shelf reef complexes. The structures are distinguished by chevron‐shaped crests and thickened cores and contain abundant non‐skeletal allochems (ooids/pisoids, peloids and intraclasts) of silt to pebble size and variably developed laminations and fenestrae. The internal morphology and pervasive occurrence of fenestral clotted and wavy laminated fabrics suggest that these structures are microbial mounds composed of agglutinated stromatolites and thrombolites. Microbial fabrics most probably originated through sediment trapping and binding by microbial mats with early lithification involving microbial calcification and cementation of trapped sediment. The facies and stratigraphic context of the mounds support a shallow subtidal, transitional backreef to reef‐flat setting; however, alone these mounds do not provide unequivocal environmental information. Other large antiformal structures in Famennian platforms on the Lennard Shelf, previously described as tepee structures, show morphological similarities to the Chedda Cliffs mounds, which suggests that these other structures may also be microbial mounds. The presence of microbial mounds in platform successions further highlights the importance of microbial communities in the Lennard Shelf reef complexes.     

Sedimentary evidence for a major glacial oscillation and proglacial lake formation in the Solway Lowlands (Cumbria,UK) during Late Devensian deglaciation

Livingstone, S. J., Ó Cofaigh, C., Evans, D. J. A. & Palmer, A. 2010: Sedimentary evidence for a major glacial oscillation and proglacial lake formation in the Solway Lowlands (Cumbria, UK) during Late Devensian deglaciation. Boreas, Vol. 39, pp. 505–527. 10.1111/j.1502‐3885.2010.00149.x. ISSN 0300‐9483. This paper is a sedimentological investigation of Late Devensian glacial deposits from the Solway Lowlands, northwest England, in the central sector of the last British–Irish Ice Sheet. In this region, laminated glaciolacustrine sediments occur, sandwiched between diamictons interpreted as subglacial tills. At one location the laminated sediments are interpreted as varves, and indicate the former presence of a proglacial lake. Correlation of these varves with other laminated sediments indicates that the glacial lake was at least 140 km² in area and probably much larger. Extensive beds of sand, silt and gravel throughout the Solway Basin associated with the lake demonstrate ice‐free conditions over a large area. Based on the number of varves, the lake was in existence for at least 261 years. The stratigraphic sequence of varves bracketed by tills implies a major glacial oscillation prior to the Scottish Re‐advance (16.8 cal. ka BP). This oscillation is tentatively correlated with the Gosforth oscillation at c.19.5 cal. ka BP. Subsequent overriding of these glaciolacustrine sediments during a westward‐moving re‐advance demonstrates rapid ice loss and then gain within the Solway Lowlands from ice‐dispersal centres in the Lake District, Pennines and Southern Uplands. It is speculated that the existence of this and other lakes along the northeastern edge of the Irish Sea Basin would have influenced ice‐sheet dynamics.     

Palaeoenvironmental record of glacial lake evolution during the early Holocene at Sokli,NE Finland

The development of a glacial lake impounded along the retreating, northeastern ice margin of the Fennoscandian Ice Sheet during the last deglaciation and environmental conditions directly following the early Holocene deglaciation have been studied in NE Finland. This so‐called Sokli Ice Lake has been reconstructed previously using topographic and geomorphologic evidence. In this paper a multiproxy approach is employed to study a 3‐m‐thick sediment succession consisting of laminated silts grading into gyttja cored in Lake Loitsana, a remnant of the Sokli Ice Lake. Variations in the sediment and siliceous microfossil records indicate distinct changes in water depth and lake size in the Loitsana basin as the Sokli Ice Lake was drained through various spillways opening up along the retreating ice front. Geochemical data (XRF core‐scanning) show changes in the influence of regional catchment geochemistry (Precambrian crystalline rocks) in the glacial lake drainage area versus local catchment geochemistry (Sokli Carbonatite Massif) within the Lake Loitsana drainage area during the lake evolution. Principal component analysis on the geochemical data further suggests that grain‐size is an additional factor responsible for the variability of the sediment geochemistry record. The trophic state of the lake changed drastically as a result of morphometric eutrophication once the glacial lake developed into Lake Loitsana. The AMS radiocarbon dating on tree birch seeds found in the glaciolacustrine sediment indicates that Lake Loitsana was deglaciated sometime prior to 10 700 cal. a BP showing that tree Betula was present on the deglaciated land surrounding the glacial lake. Although glacial lakes covered large areas of northern Finland during the last deglaciation, only few glaciolacustrine sediment successions have been studied in any detail. Our study shows the potential of these sediments for multiproxy analysis and contributes to the reconstruction of environmental conditions in NE Finland directly following deglaciation in the early Holocene.     

Glacial advance,occupation and retreat sediments associated with multi‐stage ice‐dammed lakes: north‐central Alberta,Canada

Ice sheets that advance upvalley, against the regional gradient, commonly block drainage and result in ice‐dammed proglacial lakes along their margins during advance and retreat phases. Ice‐dammed glacial lakes described in regional depositional models, in which ice blocks a major lake outlet, are often confined to basins in which the glacial lake palaeogeographical position generally remains semi‐stable (e.g. Great Lakes basins). However, in places where ice retreats downvalley, blocking regional drainage, the palaeogeographical position and lake level of glacial lakes evolve temporally in response to the position of the ice margin (referred to here as ‘multi‐stage’ lakes). In order to understand the sedimentary record of multi‐stage lakes, sediments were examined in 14 cored boreholes in the Peace and Wabasca valleys in north‐central Alberta, Canada. Three facies associations (FAI–III) were identified from core, and record Middle Wisconsinan ice‐distal to ice‐proximal glaciolacustrine (FAI) sediments deposited during ice advance, Late Wisconsinan subglacial and ice‐marginal sediments (FAII) deposited during ice‐occupation, and glaciolacustrine sediments (FAIII) that record ice retreat from the study area. Modelling of the lateral extent of FAs using water wells and gamma‐ray logs, combined with interpreted outlets and mapped moraines based on LiDAR imagery, facilitated palaeogeographical reconstruction of lakes and the identification of four major retreat‐phase lake stages. These lake reconstructions, together with the vertical succession of FAs, are used to develop a depositional model for ice‐dammed lakes during a cycle of glacial advance and retreat. This depositional model may be applied in other areas where meltwater was impounded by glacial ice advancing up the regional gradient, in order to understand the complex interaction between depositional processes, ice‐marginal position, and supply of meltwater and sediment in the lake basin. In particular, this model could be applied to decipher the genetic origin of diamicts previously interpreted to record strictly subglacial deposition or multiple re‐advances.     

Morphologic and stratigraphic evolution of muddy ebb-tidal deltas along a subsiding coast: Barataria Bay, Mississippi River delta

The Barataria barrier coast formed between two major distributaries of the Mississippi River delta: the Plaquemines deltaic headland to the east and the Lafourche deltaic headland to the west. Rapid relative sea‐level rise (1·03 cm year^?1) and other erosional processes within Barataria Bay have led to substantial increases in the area of open water (> 775 km² since 1956) and the attendant bay tidal prism. Historically, the increase in tidal discharge at inlets has produced larger channel cross‐sections and prograding ebb‐tidal deltas. For example, the ebb delta at Barataria Pass has built seaward > 2·2 km since the 1880s. Shoreline erosion and an increasing bay tidal prism also facilitated the formation of new inlets. Four major lithofacies characterize the Barataria coast ebb‐tidal deltas and associated sedimentary environments. These include a proximal delta facies composed of massive to laminated, fine grey‐brown to pale yellow sand and a distal delta facies consisting of thinly laminated, grey to pale yellow sand and silty sand with mud layers. The higher energy proximal delta deposits contain a greater percentage of sand (75–100%) compared with the distal delta sediments (60–80%). Associated sedimentary units include a nearshore facies consisting of horizontally laminated, fine to very fine grey sand with mud layers and an offshore facies that is composed of grey to dark grey, laminated sandy silt to silty clay. All facies coarsen upwards except the offshore facies, which fines upwards. An evolutionary model is presented for the stratigraphic development of the ebb‐tidal deltas in a regime of increasing tidal energy resulting from coastal land loss and tidal prism growth. Ebb‐tidal delta facies prograde over nearshore sediments, which interfinger with offshore facies. The seaward decrease in tidal current velocity of the ebb discharge produces a gradational contact between proximal and distal tidal delta facies. As the tidal discharge increases and the inlet grows in dimensions, the proximal and distal tidal delta facies prograde seawards. Owing to the relatively low gradient of the inner continental shelf, the ebb‐tidal delta lithosome is presently no more than 5 m thick and is generally only 2–3 m in thickness. The ebb delta sediment is sourced from deepening of the inlet and the associated channels and from the longshore sediment transport system. The final stage in the model envisages erosion and segmentation of the barrier chain, leading to a decrease in tidal discharge through the former major inlets. This process ultimately results in fine‐grained sedimentation seaward of the inlets and the encasement of the ebb‐tidal delta lithosome in mud. The ebb‐tidal deltas along the Barataria coast are distinguished from most other ebb deltas along sand‐rich coasts by their muddy content and lack of large‐scale stratification produced by channel cut‐and‐fills and bar migration.     

Anatomy of a subaqueous ice-contact fan and delta complex, Middle Pleistocene, North-west Germany

This paper presents a detailed analysis of the high‐resolution facies architecture of the Middle Pleistocene Porta subaqueous ice‐contact fan and delta complex, deposited on the northern margin of glacial Lake Weser (North‐west Germany). A total of 10 sand and gravel pits and more than 100 wells were examined to document the complex facies architecture. The field study was supplemented with a ground‐penetrating radar survey and a shear‐wave seismic survey. All collected sedimentological and geophysical data were integrated into a high‐resolution three‐dimensional geological model for reconstructing the spatial distribution of facies associations. The Porta subaqueous fan and delta complex consist of three fan bodies deposited on a flat lake‐bottom surface at the margin of a retreating ice lobe. The northernmost fan complex is up to 55 m thick, 6·2 km wide and 6·5 km long. The incipient fan deposition is characterized by high‐energy flows of a plane‐wall jet. Very coarse‐grained, highly scoured jet‐efflux deposits with an elongate plan shape indicate a high Froude number, probably >5. These jet‐efflux sediments are deposited in front of a large ～3·2 km long, up to 1·2 km wide, and up to 25 m deep flute‐like scour, indicating the most proximal erosion and bypass area of the jet that widens and deepens with distance downstream to the region of maximum turbulence (approximately five times the conduit diameter). Evidence for subsequent flow splitting is given by the presence of two marginal gravel fan lobes, deposited in front of 1·3 to 2·5 km long flute‐like scours, that are 0·8 to 1 km wide and 7 to 20 m deep. In response to continued aggradation, small jets developed at the periphery of these bar‐like deposits and filled in the low areas adjacent to the original superelevated regions, locally raising the depositional surface and characterized by large‐scale trough cross‐stratified sand and pebbly sand. The incision of an up to 1·2 km wide and up to 35 m deep channel into the evolving fan is attributed to a catastrophic drainage event, probably related to a lake outburst and lake‐level fall in the range of 40 to 60 m. At the mouth of this channel, highly scoured jet‐efflux deposits formed under hydraulic‐jump conditions during flow expansion. Subsequently, Gilbert‐type deltas formed on the truncated fan margin, recording a second lake‐level drop in the range of 30 to 40 m. These catastrophic lake‐level falls were probably caused by rapid ice‐lobe retreat controlled by the convex‐up bottom topography of the ice valley.     

Sedimentology of gravelly Lake Lahontan highstand shoreline deposits,Churchill Butte,Nevada, USA

Gravelly shoreline deposits of the latest Pleistocene highstand of Lake Lahontan occur in pristine depositional morphology, and are exposed in gravel pits along Churchill Butte in west-central Nevada. Four environments differentiated at this site are alluvial fan/colluvium, lakeshore barrier spit, lake lower-shoreface spit platform, and lake bottom. Lakeshore deposits abut, along erosional wave headcuts, either unsorted muddy to bouldery colluvium fringing Churchill Butte bedrock, or matrix-supported, cobbly and pebbly debris-flow deposits of the Silver Springs fan. The lakeshore barrier spit is dominated by granule pebble gravel concentrated by wave erosion of the colluvial and alluvial-fan facies. The lakeward side of the barrier consists of beachface deposits of well-sorted granules or pebbles in broad, planar beds 1–10 cm thick and sloping 10–15°. They interfinger downslope with thicker (10–25 cm) and less steep (5–10°) lakeward-dipping beds of fine to medium pebble gravel of the lake upper shoreface. Interstratified with the latter are 10–40-cm-thick sets of high-angle cross-beds that dip southward, alongshore. Higher-angle (15–20°), landward-dipping foresets of similar texture but poorer sorting comprise the proximal backshore on the landward side of the barrier. They were deposited during storm surges that overtopped the barrier berm. Gastropod-rich sand and mud, also deposited by storm-induced washover, are found landward of the gravel foresets in a 15-m-wide backshore pond. Algal stromatolites, ostracodes, and diatoms accumulated in this pond between storm events. The lake lower shoreface, extending from water depths of 2 to 8 m, consists of a southward-prograding spit platform built by longshore drift. The key component of this platform is large-scale sandy pebble gravel in 16° southward-dipping `Gilbert' foresets that grade at a water depth of about 6–7 m to 4°-dipping sandy toesets. A shift from bioturbated lower-shoreface sand and silt, to flat and laminated lake-bottom silt and mud, occurs between water depths of 10–40 m and over a shore-normal distance of ≥250 m. This lake-bottom mud facies, unlike the others, is areally expansive.     

Diamictic sediments within high Arctic lake sediment cores: evidence for lake ice rafting along the lateral glacial margin

Sediment cores from six small lake basins in the Canadian high Arctic reveal a gravel‐rich (≤30% by weight) to gravel‐poor (≥2%) diamict facies underlying massive, post‐glacial, clayey silt. Ten other lakes contain a second diamict facies within what are interpreted to be glaciolacustrine sedimentary assemblages. The sedimentology, clast fabrics and fossil remains (diatoms, ostracodes and chironomid head capsules) within both diamict facies suggest that these deposits are not tills. Clast fabrics yielded low S₁ (0·41–0·57) and high S₃ (0·09–0·22) eigenvalues, placing them within the range of ice‐rafted diamictons and glacigenic sediment flows. The high percentage of clast dip angles >45° (15–61%), random clast azimuth and lower diamict contacts conformable to underlying current‐bedded sediment favours an origin as a rain‐out or settling deposit. Samples of the matrix and scrapings of clasts from the diamicts revealed a diatom assemblage dominated by littoral and planktonic forms, such as are found in the littoral regions of the lakes today. This contrasts sharply with the assemblages within the overlying clayey silt, in which benthic forms predominate. Clasts are thus interpreted to have been rafted from the littoral areas of the lake. The process proposed to explain this is rafting by the lake ice cover in a glacial‐marginal environment. Early season meltwater, impounded along the lateral margin of retreating cold‐based glaciers, would buoyantly lift the lake ice cover and any adfrozen lake sediment. Higher lake levels and increased areal extent of seasonal freeze‐on between the lake ice cover and the lake bed would allow the redeposition of littoral sediments to the benthic regions through greater lateral shifting of the ice cover as it broke up. Incision by meltwater streams into the lateral glacial margins would later isolate the lake, allowing seasonal warming of lake water, enough to support the growth and maturation of the ostracode and chironomid species found as fossils within the diamicts.     

Lake stratigraphy implies an 80 000 yr delayed melting of buried dead ice in northern Russia

Sediment cores from lakes Kormovoye and Oshkoty in the glaciated region of the Pechora Lowland, northern Russia, reveal sediment gravity flow deposits overlain by lacustrine mud and gyttja. The sediments were deposited mainly during melting of buried glacier ice beneath the lakes. In Lake Kormovoye, differential melting of dead ice caused the lake bottom to subside at different places at different times, resulting in sedimentation and erosion occurring only some few metres apart and at shifting locations, as further melting caused inversion of the lake bottom. Basal radiocarbon dates from the two lakes, ranging between 13 and 9 ka, match with basal dates from other lakes in the Pechora Lowland as well as melting of ice‐wedges. This indicates that buried glacier ice has survived for ca. 80 000 years from the last glaciation of this area at 90 ka until about 13 ka when a warmer climate caused melting of permafrost and buried glacier ice, forming numerous lakes and a fresh‐looking glacial landscape. Copyright © 2003 John Wiley & Sons, Ltd.     

四川盆地早古生代灰泥丘中的微生物及其造岩和成丘作用

作为生物礁的特殊类型,灰泥丘在古生代十分发育,许多学者都认为它们是通过微生物造岩作用而形成的,而且,也在现代湖泊中发现了由兰菌藻的生命活动所形成的灰泥沉积物及灰泥丘。但是国际上一直没有在古生代灰泥丘中发现过细菌等微生物的实体化石,微生物促使碳酸钙沉淀、聚集的能力和机理也不明确。四川盆地北缘寒武纪和志留纪灰泥丘发育,笔者通过扫描电镜及能谱分析,在国际上首次发现了 (川西北志留纪 )灰泥丘中菌藻类微生物的实体化石及其特征的造岩成丘现象,发现的菌藻类微生物实体化石有三种类型 :1.表面光滑的卵形球体型;2.表面粗糙的椭球体型;3.网状结构型。而且,对寒武纪和志留纪灰泥丘凝块石作生物标志化合物分析也证明了其有机质生源为菌藻类微生物。这些凝块石灰泥丘中的菌藻类实体化石都显示了不同的沉积、造岩和成丘功能,因而证实了微生物在形成古生代灰泥丘中具重要作用。     

Quaternary sedimentology of the Rose Creek fan delta, Walker Lake, Nevada, USA, and implications to fan-delta facies models

The 3·2 km long Rose Creek fan delta of west‐central Nevada is prograding from an active rift margin into the 32 m deep Walker Lake. A case study of the forms, processes and facies of this fan delta reveals that the proximal and medial zones mainly are of sub‐aerial origin, and the distal zone is of lacustrine origin. Pebbly to bouldery rock‐avalanche mounds >100 m thick (Facies A) and muddy to bouldery debris flow levées 0·5 to 2·0 m thick (Facies B) dominate the proximal zone, whereas mostly matrix‐supported cobbly pebbly debris flow lobes 0·1 to 1·0 m thick (Facies C) typify the medial zone. Surficial pebble lags and gully fills (Facies D) are widespread in both zones but, in exposures, comprise only partings or lenticles between debris flow units. The distal fan delta mainly consists of lakeshore to lake‐bottom tracts formed by extensive wave reworking of debris flow facies. Nearshore deposits include erosional cobbly boulder lag beaches (Facies E), pebbly constructional beaches attached at headcuts or on barrier spits (Facies F), pebbly upper shoreface (Facies G) and sandy lower shoreface (Facies H) tracts positioned lakeward of the beach, and pebbly landward‐dipping foresets (Facies I) and backshore‐pond sand and mud (Facies J) present landward of the spits. Erosional lag beaches fringe the windward north side of the fan‐delta front, attached constructional beaches characterize the central zone, and southward‐elongating barrier spits typify the leeward south side, extending from the zone of greatest projection of the fan delta into the lake. Shoreline facies asymmetry results from largely unidirectional longshore drift caused by high fetch to the north and minimal fetch to the south, combined with the arcuate shape of the fan‐delta front. The spits overlie a platform deposited below common wave base consisting of south‐east‐trending cones of pebbly Gilbert foresets (Facies K) and sandy toesets (Facies L). Typically slumped silt and mud (Facies M) fringe both this platform and lower shoreface sand in deeper water. This case demonstrates facies types and patterns that are inconsistent with the widely promoted fan‐delta facies model having a front consisting of an apron of radially directed Gilbert foresets deposited where sub‐aerial flows enter the lake. The Rose Creek fan‐delta front instead features a sharp contact between sub‐aerial and lakeshore facies formed where waves erode, sort and redistribute heterogeneous debris flow sediment into the various shallow‐to‐deep lake facies. Gilbert foresets are present only in the lee of the fan delta where sediment moving by longshore drift reaches the brink of the spit front. This facies scenario results from the infrequency of fan‐building events versus nearly constant wind‐induced waves, a scenario that, in contrast to the popular Gilbert model, probably is the norm for fan deltas. The level of Walker Lake, and thus the position of wave reworking on the Rose Creek fan delta, fluctuated over a range of ～157 m during the last 18 kyr, producing complex interfingering between sub‐aerial and lakeshore facies across a 1700 m wide radial belt, typifying a wave‐modified, freestand lacustrine fan delta.     

Sedimentary architecture and genesis of Holocene shallow-water mud-mounds, northern Belize

Abstract Cangrejo and Bulkhead Shoals are areally extensive, Holocene biodetrital mud‐mounds in northern Belize. They encompass areas of 20 km² and 35 km² in distal and proximal positions, respectively, on a wide and shallow‐water, microtidal carbonate shelf where storms are the major process affecting sediment dynamics. Sediments at each mound are primarily biodetrital and comprise part of a eustatically forced, dominantly subtidal cycle with a recognizable deepening‐upward transgressive systems tract, condensed section and shallowing‐upward highstand systems tract. Antecedent topographic relief on Pleistocene limestone bedrock also provided marine accommodation space for deposition of sediments that are a maximum of 7·6 m thick at Cangrejo and 4·5 m thick at Bulkhead. Despite differences in energy levels and location, facies and internal sedimentological architectures of the mud‐mounds are similar. On top of Pleistocene limestone or buried soil developed on it are mangrove peat and overlying to laterally correlative shelly gravels. Deposition of these basal transgressive, premound facies tracked the rapid rate of sea‐level rise from about 6400–6500 years BP to 4500 years BP, and the thin basal sedimentation unit of the overlying mound‐core appears to be a condensed section. Following this, the thick and complex facies mosaic comprising mound‐cores represents highstand systems tract sediments deposited in the last ≈ 4500 years during slow and decelerating sea‐level rise. Within these sections, there is an early phase of progradationally offlapping catch‐up deposition and a later (and current) phase of aggradational keep‐up deposition. The mound‐cores comprise stacked storm‐deposited autogenic sedimentation units, the upper bounding surfaces of which are mostly eroded former sediment–water interfaces below which depositional textures have largely been overprinted by biogenic processes associated with Thalassia‐colonized surfaces. Vertical stacking of these units imparts a quasi‐cyclic architecture to the section that superficially mimics metre‐scale parasequences in ancient rocks. The locations of the mud‐mounds and the tidal channels transecting them have apparently been stable over the last 50 years. Characteristics that might distinguish these mud‐mounds and those mudbanks deposited in more restricted settings such as Florida Bay are their broad areal extent, high proportion of sand‐size sediment fractions and relatively abundant biotic particles derived from adjoining open shelf areas.     

广北地区沙四段滨浅湖微相的垂向演化及其地震相解释

笔者通过关键井的岩性,测井相和地震相的研究,认为东营凹陷广北地区的下第三系沙四段为滨湖亚相的砂坝,砂泥混合滩,泥滩等微相以及浅湖亚相的远砂坝,席状砂,浅湖泥等微相构成的滨湖沉积体系,由老到新的垂向上沉积演化为浅湖亚相（ES^64）－滨湖亚相（ES^34,ES^44,ES^54)－浅湖亚相（ES^14,ES^24),反映出水进－水退－水进的沉积旋回,通过地震剖面的对比和地震相的解释,建立和各沉积微相与地震相对应关系,探索不同沉积微相砂体中油气的富集规律。     

Carbonate precipitation in the alkaline lake Specchio di Venere (Pantelleria Island,Italy) and the possible role of microbial mats

Alkaline lakes like the hydrothermally affected lake Specchio di Venere (Pantelleria Island, Central Mediterranean) are typical geological settings harbouring calcified microbial mats. The present work is focused on the discrimination between biotic and abiotic processes driving carbonate precipitation in this lake, using hydrochemical, mineralogical and isotopic data. Hydrochemical analyses demonstrate that the lake is nearly 10−fold supersaturated with regard to aragonite and seasonally reaches hydromagnesite supersaturation. Microscopic observations depict organosedimentary laminated structures consisting of microbial communities and aragonitic precipitates, which are rather disseminated in pores than directly linked to microorganisms. Oxygen isotopic data indicate that authigenic carbonate crystallisation from evaporating water is the dominant precipitation process, further suggested by the absence of textural evidence of diagenetic processes. Conversely, the observed δ¹³C values reflect an influence of extracellular polymeric substances (EPS) on carbon fractionation during the precipitation process, due to the selective sequestration of ¹²C in the biomass. The above considerations suggest that at lake Specchio di Venere the carbonate precipitation is mainly of inorganic nature, but a minor role played by biologically influenced processes in microbial mats is not excluded.     

Chronological framework for the deglaciation of the Lake Michigan lobe of the Laurentide Ice Sheet from ice‐walled lake deposits

A revised chronological framework for the deglaciation of the Lake Michigan lobe of the south‐central Laurentide Ice Sheet is presented based on radiocarbon ages of plant macrofossils archived in the sediments of low‐relief ice‐walled lakes. We analyze the precision and accuracy of 15 AMS ¹⁴C ages of plant macrofossils obtained from a single ice‐walled lake deposit. The semi‐circular basin is about 0.72 km wide and formed of a 4‐ to 16‐m‐thick succession of loess and lacustrine sediment inset into till. The assayed material was leaves, buds and stems of Salix herbacea (snowbed willow). The pooled mean of three ages from the basal lag facies was 18 270 ± 50 ¹⁴C a BP (21 810 cal. a BP), an age that approximates the switch from active ice to stagnating conditions. The pooled mean of four ages for the youngest fossil‐bearing horizon was 17 770 ± 40 ¹⁴C a BP (21 180 cal. a BP). Material yielding the oldest and youngest ages may be obtained from sediment cores located at any place within the landform. Based on the estimated settling times of overlying barren, rhythmically bedded sand and silt, the lacustrine environment persisted for about 50 more years. At a 67% confidence level, the dated part of the ice‐walled lake succession persisted for between 210 and 860 cal. a (modal value: 610 cal. a). The deglacial age of five moraines or morainal complexes formed by the fluctuating margin of the Lake Michigan lobe have been assessed using this method. There is no overlap of time intervals documenting when ice‐walled lakes persisted on these landforms. The rapid readvances of the lobe during deglaciation after the last glacial maximum probably occurred at some point between the periods of ice‐walled lake sedimentation. Copyright © 2011 John Wiley & Sons, Ltd.