Structural control on the topography of the Laji–Jishi and Riyue Shan belts in the NE margin of the Tibetan plateau: Facilitation of the headward propagation of the Yellow River system

The Yellow River system, the largest river system in northern China, generally flows northeasterly through a series of linear mountain belts in the northeastern margin of the Tibetan plateau, the youngest of which are the Laji–Jishi Shan and Riyue Shan ranges, formed during late Cenozoic time due to NE–SW oblique shortening. As the product of the interaction between the tectonic process and the climate, the incision of the Yellow River system is a crucial parameter in models of the scale and timing of the crustal uplift and erosion in northeastern Tibetan plateau. Thus, whether the along-strike topographic feature of the Laji-Jishi Shan that is cut through by the Yellow River system and related streams is controlled by structural deformation or by erosion needs to be constrained. Our mapping shows that the variation in deformation along this mountain belt formed two structural saddles with relative low elevation in late Cenozoic time, through which the Yellow and Yaoshui Rivers cut into the plateau and drained a series of the Tertiary basins. The Yaoshui River is the tributary of the Huangshui River which itself flows into the Yellow River in the Lanzhou area. One saddle is present along the Yaoshui River valley, formed by NW–SE extension along the Riyue Shan Pass (RSP) normal fault, along which the Miocene and Mesozoic rocks were subsided against Proterozoic metamorphic rocks. These deformed rocks in the hanging wall are truncated by a sub-horizontal erosion surface at an elevation of 3200 m, on which terrace deposits are locally present, presumably middle Pleistocene in age. This terrace is incised by the Yaoshui River to an elevation of 3000 m, which yields 300 m of incision. Another saddle is along the Yellow River valley (the Xunhua-Linxia gouge) between the southern tip of the Laji Shan and the northern tip of the Jishi Shan, generated by en echelon folding. This structural saddle is underlain by the lower Cretaceous and Pliocene clastic rocks, which are truncated on the top by a rugged erosion surface at an average elevation of 3000 m. The Yellow River incised into this surface to an elevation of 1900 m, which yields 1100 m of incision. These two saddles, featured by topographic and structural low, were formed in the middle or late Miocene, and facilitated the headward propagation of the Yellow and Yaoshui Rivers, which initiated in early and middle Pleistocene time, respectively.     

Origin and recharge estimates of groundwater in the ordos plateau,People’s Republic of China

Groundwater is a valuable resource in the semiarid Ordos Plateau region where abundant mineral resources, such as coal, natural gas, and halite, are present. With resources development, groundwater demand will increase dramatically. The origin identification and recharge estimates of groundwater are significant components of sustainable groundwater development in the Ordos Plateau. Groundwater and precipitation samples were taken and the isotopic compositions δ²H, δ¹⁸O, and chloride were analyzed to identify groundwater origins and to estimate recharge rates. The δ²H and δ¹⁸O of the groundwater show that the groundwater recharge is of meteoric origin. The chloride mass balance (CMB) method was used to quantify recharge rates of groundwater in the Ordos Plateau, which varies from 2.93 to 22.11% of the effective annual rainfall. Recharge rates estimated by CMB were compared with values obtained from other methods and were found to be in good agreement. This study can be used to develop effective programs for groundwater management and development.     

Effects of diurnal temperature rhythm on the geothermal regime under the embankment in Qinghai–Tibet plateau

The objective of this study was to investigate the effects of diurnal temperature fluctuation amplitude (DTFA) on the geothermal regime of the embankment on the Qinghai–Tibet plateau. The investigation was simulated by respectively denoting the diurnal temperatures at the embankment surface, embankment slope, and natural ground surface with sinusoidal waves. The amplitudes of the waves were denoted by 0°C, 5°C, 8°C, and 12°C, respectively. The numerical result shows that the DTFA cannot vary the frequency of the seasonal temperature fluctuation of the underlying soil, but can significantly change the magnitude of the soil’s temperature. The changes include: (1) The high DTFA, such as 12°C, can significantly lead to the warming of the soil under the embankment. (2) Interestingly, when the DTFA at ground surface is 5°C, the underlying soil is in a cooler stage compared to when such DTFA is 0°C, 8°C, or12°C. This interesting result means that the documented model which ignores the diurnal temperature rhythm overestimates the warming of the underlying soil at the low DTFA region and underestimates such warming at the high DTFA region. This result also suggests that the soil under the embankment can be cooled down if the DTFA on the ground surface was maintained at or approximately at 5°C.     

Early Carboniferous paleomagnetic results from the northeastern margin of the Qinghai–Tibetan plateau and their implications

We conducted paleomagnetic investigations on limestone from the Lower Carboniferous Huaitoutala Formation in the Qaidam Basin near Delingha City, Qinghai Province, China. The characteristic remanent magnetization (D = 5.8°, I = − 25.7°, k = 114.3, α₉₅ = 4.8°) passes a fold test and indicates a paleopole position of − 39.2°N, 90.4°E and a paleolatitude of 13.5°N for the Qaidam Block for the early Carboniferous. Based on global tectonic reconstructions and paleontological evidence, we suggest that the Qaidam Block was adjacent to, but independent from, the North China, South China, Alashan–Hexi and Tarim blocks at this time. This result suggests that Pre-Carboniferous sutures reported around the Qaidam Basin represent collisional events within Gondwana, rather than the final sutures that gave rise to the present tectonic configuration.     

Mantle plume or slab window?: Physical and geochemical constraints on the origin of the Caribbean oceanic plateau

The Caribbean oceanic plateau formed in the Pacific realm when it erupted onto the Farallon plate from the Galapagos hotspot at ～ 90 Ma. The plateau was subsequently transported to the northeast and collided with the Great Arc of the Caribbean thus initiating subduction polarity reversal and the consequent tectonic emplacement of the Caribbean plate between the North and South American continents. The plateau represents a large outpouring of mafic volcanism, which has been interpreted as having formed by melting of a hot mantle plume. Conversely, some have suggested that a slab window could be involved in forming the plateau. However, the source regions of oceanic plateaus are distinct from N-MORB (the likely source composition for slab window mafic rocks). Furthermore, melt modelling using primitive (high MgO) Caribbean oceanic plateau lavas from Curaçao, shows that the primary magmas of the plateau contained ～ 20 wt.% MgO and were derived from 30 to 32% partial melting of a fertile peridotite source region which had a potential temperature (T_p) of 1564–1614 °C. Thus, the Caribbean oceanic plateau lavas are derived from decompression melting of a hot upwelling mantle plume with excess heat relative to ambient upper mantle. Extensional decompression partial melting of sub-slab asthenosphere in a slab window with an ambient mantle T_p cannot produce enough melt to form a plateau. The formation of the Caribbean oceanic plateau by melting of ambient upper mantle in a slab window setting, is therefore, highly improbable.     

Erosion rates evaluated by the <Superscript>137</Superscript>Cs technique in the high altitude area of the Qinghai–Tibet plateau of China

Studying spatial and temporal variation of soil loss is of great importance because of global environmental concerns. Understanding the spatial distribution of soil erosion and deposition in the high-cold steppe is important for designing soil and water conservation measures. Measured ¹³⁷Cs losses (Bq m⁻²) from long-term high altitude (4,000 m above sea level) watershed plots on the Qinghai–Tibet plateau and derived soil erosion estimates (Mg ha⁻¹ year⁻¹) were significantly correlated to directly measured soil losses from the same plots, over the same period (1963–2005). The local reference inventory was estimated to be 2,468 Bq m⁻². The result of analyzing ¹³⁷Cs distribution and its intensity in the soil profiles in this area shows similarities to ¹³⁷Cs distribution in other areas. ¹³⁷Cs is basically distributed in the topsoil layer of 0–0.3 m. Soil erosions vary greatly in the entire sampled area, ranging from 5.5 to 23 Mg ha⁻¹ year⁻¹, with an average of 16.5 Mg ha⁻¹ year⁻¹ which is a moderate rate of erosion.     

Petrology,geochemistry, and geological significance of the Nadong ocean island,Banggongco–Nujiang suture,Tibetan plateau

We studied oceanic mafic igneous rocks of the Mesozoic Banggongco–Nujang suture zone in western Tibet to constrain the tectonic evolution of these rocks and the region as a whole. Two transects were accomplished. Seven basalt samples from the base of the Nadongshan transect (N1 basalts) have flat chondrite-normalized rare earth element (REE) and primitive-mantle-normalized trace element variation diagrams that are similar to MORB. Two basalt samples from the base of the Nadongshan transect (N1 basalts), ten gabbro samples from the middle of Nadongshan transect (N2 gabbros), four basalt samples from the bottom of Tanjiuxiama transect (T1 basalts), and four basalt samples from the top of the Tanjiuxiama transect (T2 basalts) are alkali basalts and have light rare earth element (LREE)-enriched chondrite-normalized REE patterns, and have primitive-mantle-normalized trace element variation diagrams that are enriched in highly incompatible elements, similar to OIB. LREE concentrations increase from N1 basalts to the T1 and T2 basalts, which have (La/Yb)_N up to 16 and have even higher (Ce/Sm)_N. These data indicate that the Nadong ocean island is an Azores-type ocean island that formed during the mature stage of development of the Banggongco–Nujiang Ocean. The conformable nature of the Nadong ocean island with the Mugagangri Group flysch indicates that the Banggongco–Nujiang Ocean was never a large ocean.     

First Determination of the Isotope Age of the Andesite–Dacite Complex of the Eastern Zone of the Middle Urals

Doklady Earth Sciences - This paper reports on the first U–Pb dating of zircons from dacites of the volcanic paleo-edifice of the andesite–dacite complex of the Eastern Zone of the...     

Present-day tectonics of the western part of the Dzhugdzhur–Stanovoi Terrane of the southeastern frame of the North Asian Craton

The first results on current movements are presented for the western part of the Dzhugdzhur–Stanovoi Terrane based on GPS geodesy of a geodynamic survey area of the Upper Amur region. Processing of the GPS data resulted in a vector field of the displacement rates of points of the geodynamic survey area with zones of intense deformations. It was concluded from a comprehensive analysis of geological–geophysical data and estimates of the displacement rates that the terrane is characterized by kinematic integrity and was subjected to a complex of tectonic factors related to the evolution of the eastern segment of Baikal Rift Zone in the area of transpression interaction of the Eurasian and Amur plates.     

Analysis of the degree of contamination and evolution in the last 100 years of the composition of the bed sediments of the Anllóns Basin

In this study, five cores of the Anllóns River bed sediments were analyzed in order to evaluate the downcore and downstream variations in their chemical composition. The first step was the evaluation of the metal distribution in the bulk (<2 mm) and fine fractions (<63 μm). The analysis revealed that most of the metals followed the same trend in both fractions, although the fine fraction presented usually higher concentrations. However, the concentration of both fractions tended to equalize with increasing contamination. No general increase was observed in the metal concentrations toward the surface which could be attributed to recent anthropogenic contributions. Instead, the distributions were homogeneous or peaked at various depths downcore. The most important historical feature was observed at the mouth of the river, at 96-cm depth, corresponding to the end of the eighteenth century. Upcore increased metal concentrations in parallel with increased fine fraction occurred from this depth, which were attributed to a bridge construction and consequent changes in sediment dynamics. As the metal concentrations can be influenced by variations in texture or other sediment characteristics, the second step was to evaluate the efficiency of several normalized indexes in the assessment of the degree of contamination, by calculating the enrichment factor (EF), the geoaccumulation index (I _GEO) and the pollution load index (PLI). The EFs obtained were <10, thus revealing little anthropogenic inputs to the basin. The I _GEO produced higher values when compared with the EFs. Instead of absolute EF or I _GEO absolute values, the use of cumulative probability plots allowed identifying more accurately potential outliers indicating contamination. Only one population was identified for Zn and Pb, with a reduced number of outliers at the highest concentrations for Pb. As shown, a more complex plot with the outliers identified at C4 and C5. Finally, the PLI allowed determining the absence of a significant contamination in the bed sediments. The bioavailable and non-geogenic fractions contribute up to a 90% of the total concentrations in the case of As and Cu, and showed similar (dissimilar) profiles in comparison with total metals. Also, the quality guidelines were surpassed, so the high solubility of As, Zn, Pb and Ni in the sediments revealed the need to monitor the bed sediment quality of the Anllóns River.     

Features of the Influence of Weather Conditions on the Deformation Processes of the Upper Layer of the Earth’s Crust

Doklady Earth Sciences - The influence of the temperature and moisture content of the near-surface soil layer on variations of the barodeformation interaction of the boundary layer of the...     

Bursting the limits of time： the reconstruction of geohistory in the age of revolution

Bursting the Limits of Time by the distin- guished historian of geology Martin Rudwick is a massive, two-part book. The first part contains what he calls a synchronous history of what eventually became historical geology in western Europe between the time of de Sans- sure＇s epoch-making ascent of Mont Blanc in 1787 and the discovery of the Kirkdale hyaena cave by Buckland in the winter of 1821-1822,     

Numerical Modeling of the Effects of Major Elements on the Solubility of Chrome–Spinel and a Likely Solution of the Problem of the Origin of Chromitite

Doklady Earth Sciences - The influence of variations in fo-, fa-, en-, fs-, di-, an-, and ab-components in a high-Mg basaltic melt on the topology of the spinellide liquidus was analyzed using the...     

A new assemblage of ray-finned fishes (Teleostei) from the Lower Oligocene “Schistes à Meletta” from the Glières plateau, Bornes Massif, eastern France

A recently discovered fish assemblage from the “Schistes à Meletta” facies (Lower Oligocene) of the Glières Plateau, Bornes Massif, Haute–Savoie, eastern France is described. The assemblage, comprising specimens ranging from fully-articulated skeletons to isolated scattered ossifications, is composed of Anenchelum cf. glarisianum, Pristigenys sp., Fistularia sp., Caranx cf. glarisianus alongside indeterminate teleosts. This new assemblage greatly increases the fish diversity previously known from the “Schistes à Meletta” of this area. The fauna shows biogeographic affinities with assemblages from the Peritethys domain, in particular from the Helvetic molassic basin and from the Paratethys. The genera identified at the Glières locality are represented today by species living in tropical nearshore environments together with species from the open sea. A possible explanation is that the environment of deposition was rather deep, and that shallow-water fishes were brought in by turbidity currents.     

On the Origin of the Carat as the Unit of Weight for Gemstones

The carat is the unit of weight for diamonds and other gemstones.It corresponds to the average weight of the seeds of a leguminous tree.What kind of tree is this?We have studied the samples from Ethiopia,Egypt,Cyprus and the United States.The tree is neither“Kuara“nor“Locust“（Robina pseudoacacia Linn.）,but rather Carob(Ceratonia Siliqua).In Ethiopia,as called by local inhabitants,“Kuara“is a species of Erythrina-E.brucei rather than E.abyssinica.As might be expected,using the seeds as a means of weighing an extremely valuable commodity is not very scientific.Before 1907,at various times and in various countries,there were at least twenty-three stan-dards for the carat ranging from 187.00mg to 215.990mg.The metric carat equal to 200mg was proposed in Paris in 1907.It was adopted in the United States on July1,1913 and now is the world-accepted standard.But in reality,the standard of the carat is still confused with respect to its usage throughout the world .This is why the author reiterates that the standard of the car-at should be integrated with the metric system.     

Estimation of the stress state of the Earth’s crust and the upper mantle in the area of the Southern Kuril Islands

The catastrophic Shikotan earthquake of October 4 (5), 1994, occurred in the Pacific Ocean. Its focus was located 80 km eastward of Shikotan Island. The stress state of the Earth’s crust in this area was estimated by the method of the cataclastic analysis of the whole range of the earthquake mechanisms. The performed reconstruction of the parameters of the current stress state of the Earth’s crust and the upper mantle in the area of the Southern Kuril Islands made it possible to establish that this area is characterized, on the one hand, by the presence of extensive areas of steady behavior of the stress tensor parameters and, on the other hand, by the presence of local sections of anomalously fast changes in these parameters.