震后多层砌体结构的抗震鉴定与加固设计

本文以5·12汶川地震后绵竹市某砖混结构住宅为典型调查研究对象,介绍了震后多层砌体结构房屋的常见震害现象和一般震害规律,结合有关规范分析了一般受损建筑不同的抗震鉴定方法和手段,对比分析了各种抗震加固措施的加固效果与适用条件,较为全面地总结了一般多层砌体结构从震害调查到鉴定加固的方法和程序,为灾后砌体结构的抗震加固设计提...     

中小学砌体结构校舍的隔震加固技术研究

本文以抗震设防8度区的山西省某小学4层砌体结构教学楼抗震加固为背景,探讨了采用隔震技术对多层砌体房屋进行抗震加固的计算分析方法、施工工艺及相应的关键技术。结果表明,叠层橡胶垫基础隔震加固可以有效降低上部结构所受的地震作用,能够在一定程度上提高工程结构的安全性,是一种比较有效的建筑抗震加固技术。在高烈度区对砌体结构校舍进行抗震加固时,采用隔震加固技术比传统加固方法更具有优势。相关成果对于中小学砌体结构校舍抗震加固具有重要的参考价值。     

砌体建筑抗震设计及加固新方法

介绍了美国砌体建筑物地震评估及加固方面的新发展,以及美国新近推荐采用的基于使用功能的砌体抗震规范,并与中国目前采用多的层砌体房屋的抗震设计规范作比较,指出出砌体抗震设计及加固中,提高它的塑性变形能力与提高它的强度同样重要。     

底商多层砌体房屋地震倒塌机理及加固方法研究

<正>我国地震多发且震害严重,震害的主要表现是人员伤亡,而导致人员伤亡的最重要因素是房屋倒塌。汶川地震显示,在我国中小城镇,地震破坏严重的建筑结构类型主要有底商多层砌体结构、多层RC框架结构、多层砖混结构,其中极震区底商多层砌体结构倒塌比率达85%。分析这类房屋倒塌机理,提出相应的抗倒塌设计方法及对既有建筑抗倒塌加固方法十分必要。本文通过对汶川地震极震区中底商多层砌体结构好、坏两种典型代表进行深入剖析,通     

汉中农村既有砌体房屋抗震加固技术研究

基于对汉中农村既有砌体房屋现状的调查了解,分析了汉中农村既有砌体房屋的建筑方式、建筑材料、建筑地段、灾后是否重建或修缮和房屋抗震设防状况等情况;查阅文献并检索出最新的提高农村砌体房屋抗震性能的四种抗震加固方法,比较这些加固方法的相关性能,从中优选出适合汉中农村既有砌体房屋现状、危险性等级、排危加固方法和加固目的的高性能水泥复合砂浆钢筋网加固法,并对如何提高农村新建砌体房屋的抗震性能给出了建议。     

底商多层砌体房屋地震破坏机理及加固研究

正"小震大害"是我国地震灾害的真实写照,其中房屋的严重破坏和倒塌是造成人员伤亡和财产损失的重要原因。而底商多层砌体结构房屋是地震中破坏和倒塌最严重的一类房屋。在汶川地震极震区,这种类型房屋倒塌率达80%。底商多层砌体结构房屋在我国长江以南地区的中小城市非常普遍,据不完全统计,我国现存该类型的房屋约200万栋,涉及居住人口1.2亿。研究该类型结构抗震机理及对现有房屋的加固方法是当前防震减灾的迫切需求。     

增设翼柱的底商多层砌体房屋抗震性能试验研究

为研究在结构前纵墙底层部位增设翼柱对底商多层砌体房屋抗倒塌性能的影响,分别设计了一个1/5缩尺比例的普通底商多层砌体房屋及增设翼柱的砌体房屋模型分别进行振动台试验研究,对比分析各模型的破坏过程、加速度放大系数、相对位移及典型位置应变等参数。结果表明,在同样的地震动输入下,带有翼柱的底商多层砌体房屋破坏程度、层间相对位移及层间位移角均明显低于普通底商多层砌体房屋,带有翼柱的底商多层砌体房屋抗倒塌性能显著提高。     

外套预制砌体加固结构的应用及弹塑性分析

目前城市中存在着大量的老旧砌体房屋，由于建造年代久远，房屋大多缺乏抗震设计，存在着严重的安全隐患。应用外套预制装配技术对上海市某6层砌体结构进行加固改造，并应用结构分析软件SAP2000进行砌体结构弹塑性分析。通过加固前后结构地震响应分析，结果表明：相比于原结构，加固后砌体部分承担基底剪力小震和大震分别减小51.21%和13.70%,原砌体结构承担剪力得到有效削弱。原结构小震层间位移角大于1/2 000,可能发生轻微破坏，大震层间位移角大于1/250,存在倒塌风险。加固后砌体结构抗震性能得到明显改善，小震层间位移角小于1/3 500,大震层间位移角小于1/600,小震下可保证结构基本完好，大震下不致结构发生严重破坏，有效地提高了原结构抗震能力。加固后砌体结构峰值位移平均降幅在40%～90%之间，在小震作用下，加速度减小，而大震作用下则反向增大。     

西昌市某多层砌体结构抗震能力分析及加固建议

多层砌体结构由于其施工简单、经济实用等自身优点,目前大量应用于我国的各类工业与民用建筑中。此类建筑物抗震鉴定对于抗震减灾意义重大。本文首先介绍了建筑结构抗震能力鉴定的流程,并结合西昌市某多层砌体结构的抗震分析,介绍了多层砌体抗震鉴定的一般流程、方法,并给出了抗震加固的建议,可为其它地震高烈度区多层砌体结构的抗震能力分析及加固提供参考。     

砌体结构房屋抗震加固设计方法探讨

对砌体结构房屋常用的加固技术手段进行了探讨。结合茂名石化公司抗震加固设计与施工经验，提出了砌体结构房屋抗震加固设计与施工时应注意的问题。     

Seismic hazard level reduction for existing buildings considering remaining building lifespans

Seismic hazard levels lower than those for design of new buildings have been permitted for seismic evaluation and retrofit of existing buildings due to the relatively short remaining lifespans. The seismic hazard reduction enables costeffective seismic evaluation and retrofit of existing buildings with limited structural capacity. The current study proposes seismic hazard reduction factors for Korea, one of low to moderate seismicity regions. The seismic hazard reduction factors are based on equal probabilities of non-exceedance within different remaining building lifespans. A validation procedure is proposed to investigate equality of seismic risk in terms of ductility-based limit states using seismic fragility assessment of nonlinear SDOF systems, of which retrofit demands are determined by the displacement coefficient method of ASCE 41-13 for different target remaining building lifespans and corresponding reduced design earthquakes. Validation result shows that the use of seismic hazard reduction factors can be permitted in conjunction with appropriate lower bounds of the remaining building lifespans.     

Seismic resilience of retrofitted RC buildings

Existing buildings can be at a greater seismic risk due to non-conformance to current design codes and may require structural retrofitting to improve building performance. The performance of buildings is measured in terms of immediate consequences due to direct damage, but the continuing impacts related to recovery are not considered in seismic retrofit assessment. This paper introduces a framework of retrofit selection based on the seismic resilience of deficient buildings retrofitted with the conventional mitigation approaches. The assembly-based methodology is considered for the seismic resilience assessment by compiling a nonlinear numerical model and a building performance model. The collapse fragility is developed from the capacity curve, and the resulting social, economic, and environmental consequences are determined. The seismic resilience of a building is assessed by developing a downtime assessment methodology incorporating sequence of repairs, impeding factors, and utility availability. Five functionality states are developed for the building functionality given investigated time interval, and a functionality curve for each retrofit is determined. It is concluded that seismic resilience can be used as a performance indicator to assess the continuing impacts of a hazard for the retrofit selection.     

抗震设计与加固效果的实震检验

本文以１９９４年１月１７日美国加州北岭地震对各类结构选成的破坏，分析了公路桥梁、建筑物，工业设施，水坝以及基底隔震结构等的不同抗震设计和加固措施的有效性及存在的问题，为今后改进抗震设防和加固措施提供参考。     

In situ experiment on retrofit of school buildings by adding sandwich columns to partition brick walls

Many significantly strong earthquakes have occurred over the years in Taiwan, which have caused tremendous damage to primary and middle school buildings; the 921 Chi‐Chi earthquake was particularly devastating. According to statistics, 786 schools (1,958 classrooms) were damaged on September 21, 1999 during this earthquake event. The devastation showed that a lack of seismic performance is a common problem for existing school buildings in Taiwan. Therefore, the retrofit of existing school buildings has become an urgent issue in the prevention of possible damage in the future. The retrofit technique of adding sandwich columns to partition brick walls is proposed in this paper, and the feasibility of the proposed method was verified by in situ pushover tests of two real school buildings, one without and one with retrofit. The experimental and analytical results show that the sandwich column itself contributes significantly to the seismic capacity of the examined school building. Moreover, the analytical results yielded conservative capacity curves when compared with the experimental results. Copyright © 2013 John Wiley & Sons, Ltd.     

钢筋混凝土结构的抗震加固方法述评

本文讨论了钢筋混凝土结构抗震加固的原则,对目前常用的钢筋混凝土结构的加固方法进行了简要的论述,给出了各种方法的特点和适用范围以及一些需要注意的问题.文中还提出了加固方法将来可能的发展方向.     

Self-centering seismic retrofit scheme for reinforced concrete frame structures: SDOF system study

This paper presents the results of a parametric study of self-centering seismic retrofit schemes for reinforced concrete (RC) frame buildings. The self-centering retrofit system features flag-shaped hysteresis and minimal residual deformation. For comparison purpose,an alternate seismic retrofit scheme that uses a bilinear-hysteresis retrofit system such as buckling-restrained braces (BRB) is also considered in this paper. The parametric study was carried out in a single-degree-of-freedom (SDOF) system framework since a multi-story building structure may be idealized as an equivalent SDOF system and investigation of the performance of this equivalent SDOF system can provide insight into the seismic response of the multi-story building. A peak-oriented hysteresis model which can consider the strength and stiffness degradation is used to describe the hysteretic behavior of RC structures. The parametric study involves two key parameters -the strength ratio and elastic stiffness ratio between the seismic retrofit system and the original RC frame. An ensemble of 172 earthquake ground motion records scaled to the design basis earthquake in California with a probability of exceedance of 10% in 50 years was constructed for the simulation-based parametric study. The effectiveness of the two seismic retrofit schemes considered in this study is evaluated in terms of peak displacement ratio,peak acceleration ratio,energy dissipation demand ratio and residual displacement ratio between the SDOF systems with and without retrofit. It is found from this parametric study that RC structures retrofitted with the self-centering retrofit scheme (SCRS) can achieve a seismic performance level comparable to the bilinear-hysteresis retrofit scheme (BHRS) in terms of peak displacement and energy dissipation demand ratio while having negligible residual displacement after earthquake.     

Seismic fragility reduction of an unreinforced masonry school building through retrofit using ferrocement overlay

The Himalayan region is one of the major seismic areas in the world. However, similar to many other seismically active locations, there are substantial numbers of unreinforced masonry(URM) buildings; the majority of which have not been designed for seismic loads. Past seismic events have shown that such buildings are highly vulnerable to earthquakes. Retrofitting of these URM buildings is an important concern in earthquake mitigation programs. Most government school buildings in rural areas of northern India are constructed of unreinforced masonry. These school buildings are socially important structures and serve as a crucial resource for rehabilitation during any disaster. The effectiveness of ferrocement(FC) to create a URM-FC composite is described in this study by estimating the performance and fragility of a URM school building before and after a retrofit. Analytical models, based on the equivalent frame method, are developed and used for nonlinear static analysis to estimate the enhancement in capacity. The capacity enhancement due to retrofitting is presented in terms of the maximum PGA sustained and damage probabilities at the expected level of earthquake hazard.     

Development of a seismic risk mitigation methodology for public buildings applied to the hospitals of Basilicata region (Southern Italy)

This paper deals with the development of a procedure aimed at defining a seismic risk mitigation strategy for public buildings in terms of prioritization, time required and funds. The procedure is based on a global risk index involving the entire building stock under study thus facilitating an examination of risk variation over time up to its final value. Relationships between the current seismic capacity–demand ratios and the required strengthening costs (cost models) have been developed. Each of the assumed cost models has a different target in terms of capacity–demand ratio to be obtained after strengthening, basically ranging between full retrofit and upgrading. The procedure has been applied to 69 hospital buildings located in Basilicata region for which the vulnerability data was available as a result of a large assessment program set up by the regional government. Priorities have been defined on the basis of seismic capacity, local hazard and number of human beings possibly involved (exposure). The results of different strengthening strategies have been outlined with a special focus on the pros and cons of the upgrading strategy with respect to various retrofit strategies. The procedure may be applied to different categories of public buildings by properly modifying some input parameters and partially redefining criteria for prioritization.     

Developing collapse fragility curves for base-isolated buildings

Seismic isolation technique is increasingly used both for the design of new buildings and for the seismic retrofit of existing buildings. Nevertheless, so far, little attention has been paid on the collapse capacity of these structures, mainly because it requires refined nonlinear models and careful consideration of different sources of uncertainties. To fill this gap, a set of collapse fragility functions for existing reinforced concrete-frame buildings, designed for gravity loads only and then retrofitted with different isolation systems (including rubber-based and friction-based isolation systems), are derived in this study. For completeness, buildings with low and high seismic resistance are also considered. Collapse fragility functions are derived through incremental dynamic analysis, considering different collapse conditions both for isolation system and superstructure. For each case study building, mean and dispersion values are obtained considering both aleatory and epistemic uncertainties, due to record-to record and model variability, respectively. Finally, some comments on the possible use of the results of this study for practical applications are made.