Near-real-time one-kilometre Soil Moisture Active Passive soil moisture data product

The coarse resolution soil moisture (SM) data from NASA SMAP mission have been steadily produced with the expected performance since April 2015. These coarse resolution observations could be downscaled to fine resolution using fine scale observations of SM sensitive quantities from existing satellite sensors. For operational users who need near-real-time (NRT) high resolution SM data, the downscaling approach should be feasible for operational implementation, requiring limited ancillary information and primarily depending on readily available satellite observations. Based on these principles, nine potential candidate downscaling schemes were selected for developing an optimal downscaling strategy. Using remotely sensed land surface temperature (LST) and enhanced vegetation index (EVI) observations, the optimal downscaling approach was tested for operational producing a NRT 1 km SM data product from SMAP. Comprehensive assessments on the 1 km SM product were conducted based on agreement statistics with in-situ SM measurements. Statistical results show that the accuracy of the original coarse spatial resolution SMAP SM product can be significantly improved by 8% by the downscaled 1 km SM. With respect to the in-situ measurements, the 1 km SM mapping capability developed here presents a clear advantage over the SMAP/Sentinel SM data product; and it also provides better data availability for users. This study suggests that a NRT 1 km SMAP SM data product could be routinely generated from SMAP at the centre for Satellite Applications and Research of NOAA NESDIS for operational users.     

基于简化参数方法的蒙古干旱区土壤湿度被动微波遥感

卫星被动微波遥感土壤湿度,是准确分析大空间尺度上陆表水分变化信息的有效手段.美国航天局(NASA)发布的基于AMSR-E观测亮温资料的全球土壤湿度反演产品,在蒙古干旱区的实际精度并不令人满意.本文基于对地表微波辐射传输中地表粗糙度和植被层影响的简化处理方法,采用AMSR-E的6.9 GHz,10.7 GHz和18.7 GHz之V极化亮温资料,应用多频率反演算法,并以国际能量和水循环协同观测计划(The Coordinated Energy and Water Cycle Observations Project)即CEOP实验在蒙古国东部荒漠地区的地面实验资料作为先验知识,获取被动微波遥感模型的优化参数,以期获得蒙古干旱区精度更高的土壤湿度遥感估算结果.分析表明,本文方法反演的白天和夜间土壤湿度结果与地面验证值之间的均方根误差(RMSE)接近0.030 cm³/cm³, 证明所用方法在不需要其他辅助资料或参数帮助下,可较精确地反演干旱区表层土壤湿度信息,能够全天候、动态监测大空间尺度的土壤湿度变化,可为干旱区气候变化研究及陆面过程模拟和数据同化研究提供高精度的表层土壤湿度初始场资料.     

Long-term SMOS soil moisture products: A comprehensive evaluation across scales and methods in the Duero Basin (Spain)

The European Space Agency’s Soil Moisture and Ocean Salinity (SMOS) Level 2 soil moisture and the new L3 product from the Barcelona Expert Center (BEC) were validated from January 2010 to June 2014 using two in situ networks in Spain. The first network is the Soil Moisture Measurement Stations Network of the University of Salamanca (REMEDHUS), which has been extensively used for validating remotely sensed observations of soil moisture. REMEDHUS can be considered a small-scale network that covers a 1300 km² region. The second network is a large-scale network that covers the main part of the Duero Basin (65,000 km²). At an existing meteorological network in the Castilla y Leon region (Inforiego), soil moisture probes were installed in 2012 to provide data until 2014. Comparisons of the temporal series using different strategies (total average, land use, and soil type) as well as using the collocated data at each location were performed. Additionally, spatial correlations on each date were computed for specific days. Finally, an improved version of the Triple Collocation (TC) method, i.e., the Extended Triple Collocation (ETC), was used to compare satellite and in situ soil moisture estimates with outputs of the Soil Water Balance Model Green-Ampt (SWBM-GA). The results of this work showed that SMOS estimates were consistent with in situ measurements in the time series comparisons, with Pearson correlation coefficients (R) and an Agreement Index (AI) higher than 0.8 for the total average and the land-use averages and higher than 0.85 for the soil-texture averages. The results obtained at the Inforiego network showed slightly better results than REMEDHUS, which may be related to the larger scale of the former network. Moreover, the best results were obtained when all networks were jointly considered. In contrast, the spatial matching produced worse results for all the cases studied.These results showed that the recent reprocessing of the L2 products (v5.51) improved the accuracy of soil moisture retrievals such that they are now suitable for developing new L3 products, such as the presented in this work. Additionally, the validation based on comparisons between dense/sparse networks and satellite retrievals at a coarse resolution showed that temporal patterns in the soil moisture are better reproduced than spatial patterns.     

Comparison of SMOS,modelled and in situ long-term soil moisture series in the northwest of Spain

ABSTRACT

This work aimed to evaluate the capability of modelled vs in situ soil moisture observations in the northwest of Spain for a period of four years (2010–2013) in order to validate the SMOS L2 product. Comparisons were performed for a set of representative stations of the Soil Moisture Measurement Stations network of the University of Salamanca (REMEDHUS) at both point and area scales. The SMOS series showed good correlation with the modelled series, better than that obtained with the in situ observations (0.77 vs 0.68 average correlation coefficients). However, some underestimation or overestimation of the SMOS series, related to the soil characteristics, was observed with respect to both the in situ and the modelled series. The SMOS data normalization produced a notable improvement in the results, highlighting the capability of the modelled data to validate the SMOS soil moisture series. This research provides a solid foundation for the future validation of SMOS at large scales, overcoming the spatial representativeness issues arising from the use of in situ point measurements.

Editor M.C. Acreman; Associate editor N. Verhoest     

Global Soil Moisture Patterns Observed by Space Borne Microwave Radiometers and Scatterometers

Within the scope of the upcoming launch of a new water related satellite mission (SMOS) a global evaluation study was performed on two available global soil moisture products. ERS scatterometer surface wetness data was compared to AMSR-E soil moisture data. This study pointed out a strong similarity between both products in sparse to moderate vegetated regions with an average correlation coefficient of 0.83. Low correlations were found in densely vegetated areas and deserts. The low values in the vegetated regions can be explained by the limited soil moisture retrieval capabilities over dense vegetation covers. Soil emission is attenuated by the canopy and tends to saturate the microwave signal with increasing vegetation density, resulting in a decreased sensor sensitivity to soil moisture variations. It is expected that the new low frequency satellite mission (SMOS) will obtain soil moisture products with a higher quality in these regions. The low correlations in the desert regions are likely due to volume scattering or to the dielectric dynamics within the soil. The volume scattering in dry soils causes a higher backscatter under very dry conditions than under conditions when the sub-surface soil layers are somewhat wet. In addition, at low moisture levels the dielectric constant has a reduced sensitivity in response to changes in the soil moisture content. At a global scale the spatial correspondence of both products is high and both products clearly distinguish similar regions with high seasonal and inter annual variations. Based on the global analyses we concluded that the quality of both products was comparable and in the sparse to moderate vegetated regions both products may be beneficial for large scale validation of SMOS soil moisture. Some limitations of the studied products are different, pointing to significant potential for combining both products into one superior soil moisture data set.     

Could operational hydrological models be made compatible with satellite soil moisture observations?

Soil moisture is a significant state variable in flood forecasting. Nowadays more and more satellite soil moisture products are available, yet their usage in the operational hydrology is still limited. This is because the soil moisture state variables in most operational hydrological models (mostly conceptual models) are over‐simplified—resulting in poor compatibility with the satellite soil moisture observations. A case study is provided to discuss this in more detail, with the adoption of the XAJ model and the Soil Moisture and Ocean Salinity (SMOS) level‐3 soil moisture observation to illustrate the relevant issues. It is found that there are three distinct deficiencies existed in the XAJ model that could cause the mismatch issues with the SMOS soil moisture observation: (i) it is based on runoff generation via the field capacity excess mechanism (interestingly, such a runoff mechanism is called the saturation excess in XAJ while in fact it is clearly a misnomer); (ii) evaporation occurs at the potential rate in its upper soil layer until the water storage in the upper layer is exhausted, and then the evapotranspiration process from the lower layers will commence – leading to an abrupt soil water depletion in the upper soil layer; (iii) it uses the multi‐bucket concept at each soil layer – hence the model has varied soil layers. Therefore, it is a huge challenge to make an operational hydrological model compatible with the satellite soil moisture data. The paper argues that this is possible and some new ideas have been explored and discussed. Copyright © 2016 John Wiley & Sons, Ltd.     

The NAFE’06 data set: Towards soil moisture retrieval at intermediate resolution

The National Airborne Field Experiment 2006 (NAFE’06) was conducted during a three week period of November 2006 in the Murrumbidgee River catchment, located in southeastern Australia. One objective of NAFE’06 was to explore the suitability of the area for SMOS (Soil Moisture and Ocean Salinity) calibration/validation and develop downscaling and assimilation techniques for when SMOS does come on line. Airborne L-band brightness temperature was mapped at 1 km resolution 11 times (every 1–3 days) over a 40 by 55 km area in the Yanco region and 3 times over a 40 by 50 km area that includes Kyeamba Creek catchment. Moreover, multi-resolution, multi-angle and multi-spectral airborne data including surface temperature, surface reflectance (green, read and near infrared), lidar data and aerial photos were acquired over selected areas to develop downscaling algorithms and test multi-angle and multi-spectral retrieval approaches. The near-surface soil moisture was measured extensively on the ground in eight sampling areas concurrently with aircraft flights, and the soil moisture profile was continuously monitored at 41 sites. Preliminary analyses indicate that (i) the uncertainty of a single ground measurement was typically less than 5% vol. (ii) the spatial variability of ground measurements at 1 km resolution was up to 10% vol. and (iii) the validation of 1 km resolution L-band data is facilitated by selecting pixels with a spatial soil moisture variability lower than the point-scale uncertainty. The sensitivity of passive microwave and thermal data is also compared at 1 km resolution to illustrate the multi-spectral synergy for soil moisture monitoring at improved accuracy and resolution. The data described in this paper are available at www.nafe.unimelb.edu.au.     

Root-zone soil moisture estimation from assimilation of downscaled Soil Moisture and Ocean Salinity data

The crucial role of root-zone soil moisture is widely recognized in land–atmosphere interaction, with direct practical use in hydrology, agriculture and meteorology. But it is difficult to estimate the root-zone soil moisture accurately because of its space-time variability and its nonlinear relationship with surface soil moisture. Typically, direct satellite observations at the surface are extended to estimate the root-zone soil moisture through data assimilation. But the results suffer from low spatial resolution of the satellite observation. While advances have been made recently to downscale the satellite soil moisture from Soil Moisture and Ocean Salinity (SMOS) mission using methods such as the Disaggregation based on Physical And Theoretical scale Change (DisPATCh), the assimilation of such data into high spatial resolution land surface models has not been examined to estimate the root-zone soil moisture. Consequently, this study assimilates the 1-km DisPATCh surface soil moisture into the Joint UK Land Environment Simulator (JULES) to better estimate the root-zone soil moisture. The assimilation is demonstrated using the advanced Evolutionary Data Assimilation (EDA) procedure for the Yanco area in south eastern Australia. When evaluated using in-situ OzNet soil moisture, the open loop was found to be 95% as accurate as the updated output, with the updated estimate improving the DisPATCh data by 14%, all based on the root mean square error (RMSE). Evaluation of the root-zone soil moisture with in-situ OzNet data found the updated output to improve the open loop estimate by 34% for the 0–30 cm soil depth, 59% for the 30–60 cm soil depth, and 63% for the 60–90 cm soil depth, based on RMSE. The increased performance of the updated output over the open loop estimate is associated with (i) consistent estimation accuracy across the three soil depths for the updated output, and (ii) the deterioration of the open loop output for deeper soil depths. Thus, the findings point to a combined positive impact from the DisPATCh data and the EDA procedure, which together provide an improved soil moisture with consistent accuracy both at the surface and at the root-zone.     

Sea Surface Salinity Observations from Space with the SMOS Satellite: A New Means to Monitor the Marine Branch of the Water Cycle

While it is well known that the ocean is one of the most important component of the climate system, with a heat capacity 1,100 times greater than the atmosphere, the ocean is also the primary reservoir for freshwater transport to the atmosphere and largest component of the global water cycle. Two new satellite sensors, the ESA Soil Moisture and Ocean Salinity (SMOS) and the NASA Aquarius SAC-D missions, are now providing the first space-borne measurements of the sea surface salinity (SSS). In this paper, we present examples demonstrating how SMOS-derived SSS data are being used to better characterize key land–ocean and atmosphere–ocean interaction processes that occur within the marine hydrological cycle. In particular, SMOS with its ocean mapping capability provides observations across the world’s largest tropical ocean fresh pool regions, and we discuss from intraseasonal to interannual precipitation impacts as well as large-scale river runoff from the Amazon–Orinoco and Congo rivers and its offshore advection. Synergistic multi-satellite analyses of these new surface salinity data sets combined with sea surface temperature, dynamical height and currents from altimetry, surface wind, ocean color, rainfall estimates, and in situ observations are shown to yield new freshwater budget insight. Finally, SSS observations from the SMOS and Aquarius/SAC-D sensors are combined to examine the response of the upper ocean to tropical cyclone passage including the potential role that a freshwater-induced upper ocean barrier layer may play in modulating surface cooling and enthalpy flux in tropical cyclone track regions.     

Connecting Satellite Observations with Water Cycle Variables Through Land Data Assimilation: Examples Using the NASA GEOS-5 LDAS

A land data assimilation system (LDAS) can merge satellite observations (or retrievals) of land surface hydrological conditions, including soil moisture, snow, and terrestrial water storage (TWS), into a numerical model of land surface processes. In theory, the output from such a system is superior to estimates based on the observations or the model alone, thereby enhancing our ability to understand, monitor, and predict key elements of the terrestrial water cycle. In practice, however, satellite observations do not correspond directly to the water cycle variables of interest. The present paper addresses various aspects of this seeming mismatch using examples drawn from recent research with the ensemble-based NASA GEOS-5 LDAS. These aspects include (1) the assimilation of coarse-scale observations into higher-resolution land surface models, (2) the partitioning of satellite observations (such as TWS retrievals) into their constituent water cycle components, (3) the forward modeling of microwave brightness temperatures over land for radiance-based soil moisture and snow assimilation, and (4) the selection of the most relevant types of observations for the analysis of a specific water cycle variable that is not observed (such as root zone soil moisture). The solution to these challenges involves the careful construction of an observation operator that maps from the land surface model variables of interest to the space of the assimilated observations.     

Calibration of an integrated land surface process and radiobrightness (LSP/R) model during summertime

In this study, a soil vegetation and atmosphere transfer (SVAT) model was linked with a microwave emission model to simulate microwave signatures for different terrain during summertime, when the energy and moisture fluxes at the land surface are strong. The integrated model, land surface process/radiobrightness (LSP/R), was forced with weather and initial conditions observed during a field experiment. It simulated the fluxes and brightness temperatures for bare soil and brome grass in the Northern Great Plains. The model estimates of soil temperature and moisture profiles and terrain brightness temperatures were compared with the observed values. Overall, the LSP model provides realistic estimates of soil moisture and temperature profiles to be used with a microwave model. The maximum mean differences and standard deviations between the modeled and the observed temperatures (canopy and soil) were 2.6 K and 6.8 K, respectively; those for the volumetric soil moisture were 0.9% and 1.5%, respectively. Brightness temperatures at 19 GHz matched well with the observations for bare soil, when a rough surface model was incorporated indicating reduced dielectric sensitivity to soil moisture by surface roughness. The brightness temperatures of the brome grass matched well with the observations indicating that a simple emission model was sufficient to simulate accurate brightness temperatures for grass typical of that region and surface roughness was not a significant issue for grass-covered soil at 19 GHz. Such integrated SVAT-microwave models allow for direct assimilation of microwave observations and can also be used to understand sensitivity of microwave signatures to changes in weather forcings and soil conditions for different terrain types.     

Improvement of multi-layer soil moisture prediction using support vector machines and ensemble Kalman filter coupled with remote sensing soil moisture datasets over an agriculture dominant basin in China

Soil moisture prediction is of great importance in crop yield forecasting and drought monitoring. In this study, the multi-layer root zone soil moisture (0-5, 0-10, 10-40 and 40-100 cm) prediction is conducted over an agriculture dominant basin, namely the Xiang River Basin, in southern China. The support vector machines (SVM) coupled with dual ensemble Kalman filter (EnKF) technique (SVM-EnKF) is compared with SVM for its potential capability to improve the efficiency of soil moisture prediction. Three remote sensing soil moisture products, namely SMAP, ASCAT and AMSR2, are evaluated for their performance in multi-layer soil moisture prediction with SVM and SVM-EnKF, respectively. Multiple cases are designed to investigate the performance of SVM, the effectiveness of coupling dual EnKF technique and the applicability of the remote sensing products in soil moisture prediction. The main results are as follows: (a) The efficiency of soil moisture prediction with SVM using meteorological variables as inputs is satisfactory for the surface layers (0-5 and 0-10 cm), while poor for the root zone layers (10-40 and 40-100 cm). Adding SMAP as input to SVM can improve its performance in soil moisture prediction, with more than 47% increase in the R-value and at least 11% reduction in RMSE for all layers. However, adding ASCAT or AMSR2 has no improvement for its performance. (b) Coupling dual EnKF can significantly improve the performance of SVM in the soil moisture prediction of both surface and the root zone layers. The increase in R-value is above 80%, while the reduction in BIAS and RMSE is respectively more than 90% and 63%. However, adding remote sensing soil moisture products as inputs can no further improve the performance of SVM-EnKF. (c) The SVM-EnKF can eliminate the influence of remote sensing soil moisture extreme values in soil moisture prediction, therefore, improve its accuracy.     

The effect of roughness in simultaneously retrieval of land surface parameters

Using remotely-sensed data, various soil moisture estimation models have been developed for bare soil areas. Previous studies have shown that the brightness temperature (BT) measured by passive microwave sensors were affected by characteristics of the land surface parameters including soil moisture, vegetation cover and soil roughness. Therefore knowledge of vegetation cover and soil roughness is important for obtaining frequent and global estimations of land surface parameters especially soil moisture.In this study, a model called Simultaneous Land Parameters Retrieval Model (SLPRM) that is an iterative least-squares minimization method is proposed. The algorithm estimates surface soil moisture, land surface temperature and canopy temperature simultaneously in vegetated areas using AMSR-E (Advance Microwave Scanning Radiometer-EOS) brightness temperature data. The simultaneous estimations of the three parameters are based on a multi-parameter inversion algorithm which includes model construction, calibration and validation using observations carried out for the SMEX03 (Soil Moisture Experiment, 2003) region in the South and North of Oklahoma.Roughness parameter has also been included in the algorithm to increase the soil parameters retrieval accuracy. Unlike other methods, the SLPRM method works efficiently in all land covers types.The study focuses on soil parameters estimation by comparing three different scenarios with the inclusion of roughness data and selects the most appropriate one. The difference between the resulted accuracies of scenarios is due to the roughness calculation approach.The analysis on the retrieval model shows a meaningful and acceptable accuracy on soil moisture estimation according to the three scenarios.The SLPRM method has shown better performance when the SAR (Synthetic Aperture RADAR) data are used for roughness calculation.     

An intercomparison of remotely sensed soil moisture products at various spatial scales over the Iberian Peninsula

Soil moisture (SM) can be retrieved from active microwave (AM), passive microwave (PM) and thermal infrared (TIR) observations, each having unique spatial and temporal coverages. A limitation of TIR‐based retrievals is a dependence on cloud‐free conditions, whereas microwave retrievals are almost all weather proof. A downside of SM retrievals from PM is the coarse spatial resolution. Although SM retrievals at coarse spatial resolution proved to be valuable for global‐scale and continental‐scale studies, their value for regional‐scale studies remains limited. To increase the use of SM retrievals from PM observations, an existing method to enhance their spatial resolution was applied. We present an intercomparison study over the Iberian Peninsula for three SM products on two different spatial sampling grids. The remotely sensed SM products were also compared with in situ observations from the Remedhus network. Variations between ground data and satellite‐based SM are observed; all three remotely sensed SM products show good agreement to the ground observations. The comparison shows that these ground observations and satellite data are consistent, based on the correlation coefficient (R) and root mean square error (RMSE). The remotely sensed products were intercompared after sampling at 25 × 25 km² and after applying the smoothing filter‐based intensity modulation (SFIM) downscaling technique at 10 × 10 km² grids. After the application of the SFIM technique, the SM retrievals from PM observations show better agreement with the other remotely sensed SM products for approximately 40% of the study area. For another 40% of the study area, we found a similar agreement between these product combinations, whereas in extreme environments, both arid and densely vegetated regions, the agreement decreases after the application of the SFIM technique. Agreement between retrievals of absolute SM content from PM and TIR observations is generally high (R = 0.77 for semi‐arid areas). This study enhances our understanding of the remotely sensed SM products for improvements of SM retrieval and merging strategies. Copyright © 2013 John Wiley & Sons, Ltd.     

Analysis of spatial distribution and multi-year trend of the remotely sensed soil moisture on the Tibetan Plateau

Long-term highly accurate surface soil moisture data of TP(Tibetan Plateau)are important to the research of Asian monsoon and global atmospheric circulation.However,due to the sparse in-situ networks,the lack of soil moisture observations has seriously hindered the progress of climate change researches of TP.Based on the Dual-Channel soil moisture retrieval algorithm and the satellite observation data of AMSR-E(Advanced Microwave Scanning Radiometer for EOS),we have produced the surface soil moisture data of TP from 2003 to 2010 and analyzed the seasonal characteristic of the soil moisture spatial distribution and its multi-year changing trend in area of TP.Compared to the in-situ observations,the accuracy of the soil moisture retrieved by the proposed algorithm is evaluated.The evaluation result shows that the new soil moisture product has a better accuracy in the TP region than the official product of AMSR-E.The spatial distribution of the annual mean values of soil moisture and the seasonal variations of the monthly-averaged soil moisture are analyzed.The results show that the soil moisture variations in space and time are consistent with the precipitation distribution and the water vapor transmission path in TP.Based on the new soil moisture product,we also analyzed the spatial distribution of the changing trend of multi-year soil moisture in TP.From the comparisons with the precipitation changing trend obtained from the meteorological observation sites in TP,we found that the spatial pattern of the changing trend of soil moisture coincides with the precipitation as a whole.     

Method development for estimating soil organic carbon content in an alpine region using soil moisture data

The high soil organic carbon(SOC) content in alpine meadow can significantly change soil hydrothermal properties and further affect the soil temperature and moisture as well as the surface water and energy budget. Therefore, this study first introduces a parameterization scheme to describe the effect of SOC content on soil hydraulic and thermal parameters in a land surface model(LSM), and then the SOC content is estimated by minimizing the difference between observed and simulated surface-layer soil moisture. The accuracy of the estimated SOC content was evaluated using in situ observation data at a soil moisture and temperature-measuring network in Naqu, central Tibetan Plateau. Sensitivity experiments show that the optimum time window for stabilizing the estimation results cannot be shorter than three years. In the experimental area, the estimated SOC content can generally reflect the spatial distribution of the measurements, with a root mean square error of 0.099 m^3 m^-3, a mean bias of 0.043 m^3 m^-3, and a correlation coefficient of 0.695. The estimated SOC content is not sensitive to the temporal frequency of the soil moisture data input. Even if the temporal frequency is as low as that of current soil moisture products derived from passive microwave satellites, the estimation result is still stable. Therefore, by combining a high-quality satellite soil moisture product and a parameter optimization method, it is possible to obtain grid-scale effective parameter values, such as SOC content,for an LSM and improve the simulation ability of the LSM.     

Utilization of satellite data in land surface hydrology: sensitivity and assimilation

This paper investigates the sensitivity of potential evapotranspiration to input meteorological variables, i.e. surface air temperature and surface vapor pressure. The sensitivity studies have been carried out for a wide range of land surface variables such as wind speed, leaf area index and surface temperatures. Errors in the surface air temperature and surface vapor pressure result in errors of different signs in the computed potential evapotranspiration. This result has implications for use of estimated values from satellite data or analysis of surface air temperature and surface vapor pressure in large‐scale hydrological modeling. The comparison of cumulative potential evapotranspiration estimates using ground observations and satellite observations over Manhattan, Kansas for a period of several months shows a variable difference between the two estimates. The use of satellite estimates of surface skin temperature in hydrological modeling to update the soil moisture using a physical adjustment concept is studied in detail, including the extent of changes in soil moisture resulting from the assimilation of surface skin temperature. The soil moisture of the 1 cm surface layer was adjusted by 0·9 mm over a 10‐day period as a result of a 3 K difference between the predicted and the observed surface temperature. This is a considerable amount given the fact that the top layer can hold only 5 mm of moisture. Copyright © 2001 John Wiley & Sons, Ltd.     

Estimating growing-season root zone soil moisture from vegetation index-based evapotranspiration fraction and soil properties in the Northwest Mountain region,USA

A soil moisture retrieval method is proposed, in the absence of ground-based auxiliary measurements, by deriving the soil moisture content relationship from the satellite vegetation index-based evapotranspiration fraction and soil moisture physical properties of a soil type. A temperature–vegetation dryness index threshold value is also proposed to identify water bodies and underlying saturated areas. Verification of the retrieved growing season soil moisture was performed by comparative analysis of soil moisture obtained by observed conventional in situ point measurements at the 239-km² Reynolds Creek Experimental Watershed, Idaho, USA (2006–2009), and at the US Climate Reference Network (USCRN) soil moisture measurement sites in Sundance, Wyoming (2012–2015), and Lewistown, Montana (2014–2015). The proposed method best represented the effective root zone soil moisture condition, at a depth between 50 and 100 cm, with an overall average R² value of 0.72 and average root mean square error (RMSE) of 0.042.     

Requirements of a global near-surface soil moisture satellite mission: accuracy,repeat time,and spatial resolution

Soil moisture satellite mission accuracy, repeat time and spatial resolution requirements are addressed through a numerical twin data assimilation study. Simulated soil moisture profile retrievals were made by assimilating near-surface soil moisture observations with various accuracy (0, 1, 2, 3, 4, 5 and 10%v/v standard deviation) repeat time (1, 2, 3, 5, 10, 15, 20 and 30 days), and spatial resolution (0.5, 6, 12 18, 30, 60 and 120 arc-min). This study found that near-surface soil moisture observation error must be less than the model forecast error required for a specific application when used as data assimilation input, else slight model forecast degradation may result. It also found that near-surface soil moisture observations must have an accuracy better than 5%v/v to positively impact soil moisture forecasts, and that daily near-surface soil moisture observations achieved the best soil moisture and evapotranspiration forecasts for the repeat times assessed, with 1–5 day repeat times having the greatest impact. Near-surface soil moisture observations with a spatial resolution finer than the land surface model resolution (∼30 arc-min) produced the best results, with spatial resolutions coarser than the model resolution yielding only a slight degradation. Observations at half the land surface model spatial resolution were found to be appropriate for our application. Moreover, it was found that satisfying the spatial resolution and accuracy requirements was much more important than repeat time.