Global mapping of lunar crustal magnetic fields by Lunar Prospector

The Lunar Prospector Electron Reflectometer has obtained the first global map of lunar crustal magnetic fields, revealing that the effects of basin-forming impacts dominate the large-scale distribution of remanent magnetic fields on the Moon. The weakest surface magnetic fields (<0.2 nT) are found within two of the largest and most recent impact basins, Orientale and Imbrium. Conversely, the largest concentrations of strong surface fields (>40 nT) are diametrically opposite to these same basins. This pattern is present though less pronounced for several other post-Nectarian impact basins larger than 500 km in diameter. The reduced strength and clarity of the pattern for older basins may be attributed to: (1) demagnetization from many smaller impacts, which erases antipodal magnetic signatures over time, (2) superposition effects from other large impacts, and (3) variation in the strength of the ambient magnetizing field. The absence of fringing fields stronger than 1 nT around the perimeter of the Imbrium basin or associated with craters within the basin implies that any uniform magnetization of the impact melt must be weaker than ∼¹⁰⁻⁶ G cm³ g⁻¹. This limits the strength of any steady ambient magnetic field to no more than ∼0.1 Oe at the lunar surface while the basin cooled for tens of millions of years following the Imbrium impact 3.8 billion years ago.     

Central magnetic anomalies of Nectarian-aged lunar impact basins: Probable evidence for an early core dynamo

A re-examination of all available low-altitude LP magnetometer data confirms that magnetic anomalies are present in at least four Nectarian-aged lunar basins: Moscoviense, Mendel-Rydberg, Humboldtianum, and Crisium. In three of the four cases, a single main anomaly is present near the basin center while, in the case of Crisium, anomalies are distributed in a semi-circular arc about the basin center. These distributions, together with a lack of other anomalies near the basins, indicate that the sources of the anomalies are genetically associated with the respective basin-forming events. These central basin anomalies are difficult to attribute to shock remanent magnetization of a shocked central uplift and most probably imply thermoremanent magnetization of impact melt rocks in a steady magnetizing field. Iterative forward modeling of the single strongest and most isolated anomaly, the northern Crisium anomaly, yields a paleomagnetic pole position at 81° ± 19°N, 143° ± 31°E, not far from the present rotational pole. Assuming no significant true polar wander since the Crisium impact, this position is consistent with that expected for a core dynamo magnetizing field. Further iterative forward modeling demonstrates that the remaining Crisium anomalies can be approximately simulated assuming a multiple source model with a single magnetization direction equal to that inferred for the northernmost anomaly. This result is most consistent with a steady, large-scale magnetizing field. The inferred mean magnetization intensity within the strongest basin sources is ∼1 A/m assuming a 1-km thickness for the source layer. Future low-altitude orbital and surface magnetometer measurements will more strongly constrain the depth and/or thicknesses of the sources.     

Seismic effects from major basin formations on the moon and mercury

Grooved and hilly terrains occur at the antipode of major basins on the Moon (Imbrium, Orientale) and Mercury (Caloris). Such terrains may represent extensive landslides and surface disruption produced by impact-generatedP-waves and antipodal convergence of surface waves. Order-of-magnitude calculations for an Imbrium-size impact (10³⁴ erg) on the Moon indicateP-wave-induced surface displacements of 10 m at the basin antipode that would arrive prior to secondary ejecta. Comparable surface waves would arrive subsequent to secondary ejecta impacts beyond 10³ km and would increase in magnitude as they converge at the antipode. Other seismically induced surface features include: subdued, furrowed crater walls produced by landslides and concomitant secondary impacts; emplacement and leveling of light plains units owing to seismically induced ‘fluidization’ of slide material; knobby, pitted terrain around old basins from enhancement of seismic waves in ancient ejecta blankets; and perhaps the production and enhancement of deep-seated fractures that led to the concentration of farside lunar maria in the Apollo-Ingenii region.     

Constraints on the source of lunar cataclysm impactors

Multiple impact basins formed on the Moon about 3.8 Gyr ago in what is known as the lunar cataclysm or Late Heavy Bombardment. Many workers currently interpret the lunar cataclysm as an impact spike primarily caused by main-belt asteroids destabilized by delayed planetary migration. We show that morphologically fresh (class 1) craters on the lunar highlands were mostly formed during the brief tail of the cataclysm, as they have absolute crater number density similar to that of the Orientale basin and ejecta blanket. The connection between class 1 craters and the cataclysm is supported by the similarity of their size-frequency distribution to that of stratigraphically-identified Imbrian craters. Majority of lunar craters younger than the Imbrium basin (including class 1 craters) thus record the size-frequency distribution of the lunar cataclysm impactors. This distribution is much steeper than that of main-belt asteroids. We argue that the projectiles bombarding the Moon at the time of the cataclysm could not have been main-belt asteroids ejected by purely gravitational means.     

Photometric anomalies of the lunar surface studied with SMART-1 AMIE data

We present new results from the mapping of lunar photometric function parameters using images acquired by the spacecraft SMART-1 (European Space Agency). The source data for selected lunar areas imaged by the AMIE camera of SMART-1 and the data processing are described. We interpret the behavior of photometric function in terms of lunar regolith properties. Our study reveals photometric anomalies on both small (sub-kilometer) and large (tens of kilometers) scales. We found the regolith mesoscale roughness of lunar swirls to be similar in Mare Marginis, Mare Ingenii, and the surrounding terrains. Unique photometric properties related to peculiarities of the millimeter-scale regolith structure for the Reiner Gamma swirl are confirmed. We identified several impact craters of subkilometer sizes as the source of photometric anomalies created by an increase in mesoscale roughness within the proximal crater ejecta zones. The extended ray systems reveal differences in the photometric properties between proximal and distant ejecta blankets. Basaltic lava flows within Mare Imbrium and Oceanus Procellarum indicate higher regolith porosity for the redder soils due to differences in the chemical composition of lavas.     

A global model of the internal magnetic field of the Moon based on Lunar Prospector magnetometer observations

A preliminary model of the internal magnetic field of the Moon is developed using a novel, correlative technique on the low-altitude Lunar Prospector magnetic field observations. Subsequent to the removal of a simple model of the external field, an internal dipole model is developed for each pole-to-pole half-orbit. This internal dipole model exploits Lunar Prospector's orbit geometry and incorporates radial and theta vector component data from immediately adjacent passes into the model. These adjacent passes are closely separated in space and time and are thus characteristic of a particular lunar regime (wake, solar wind, magnetotail, magnetosheath) or regimes. Each dipole model thus represents the correlative parts of three adjacent passes, and provides an analytic means of continuing the data to a constant surface of 30 km above the mean lunar radius. The altitude-normalized radial field from the wake and tail regimes is used to build a model in which 99.2% of the 360 by 360 bins covering the lunar surface are filled. This global model of the radial magnetic field is used to construct a degree 178 spherical harmonic model of the field via the Driscoll and Healy sampling theorem. Terms below about degree 150 are robust, and polar regions are considered to be the least reliable. The model resolves additional detail in the low magnetic field regions of the Imbrium and Orientale basins, and also in the four anomaly clusters antipodal to the large lunar basins. The model will be of use in understanding the sources of the internal field, and as a first step in modeling the interaction of the internal field with the solar wind.     

Was there ever a Terminal Lunar Cataclysm?: With lunar viscosity arguments

About 30 years ago there was a suggestion by several able scientists at the California Institute of Technology that the Moon had undergone a Terminal Lunar Cataclysm. This meant that most of the early impact cratering had been concentrated strongly at about the time of formation of the Imbrium basin. This solution was discussed in many papers and the idea of a cataclysm gradually faded away. In about 1990 it was again revived by several scientists. The idea of a Terminal Lunar Cataclysm at about the time the Imbrium basin was formed was advanced albeit in a somewhat different manner. The present paper has been written to analyze the various observations and interpretations that have been advanced to permit a cataclysm. It is concluded that the three main proposals, which, if correct, would have permitted a cataclysm to have occurred, are each faulty and not consistent with such a cataclysm. To demonstrate this conclusion it was necessary to determine absolute ages of various lunar features. This meant, in part, determinations of the existence and nature of lunar crustal viscosity consistent with times of formation of six lunar basins. The results of such studies yielded an internally consistent model which requires a long period from the original formation of the Moon at about 4.5 byr to a time slightly earlier than that of the formation of the Imbrium basin at about 3.84 byr. On this model there is no indication of a clustering of events and it is concluded that a Terminal Lunar Cataclysm never occurred.     

Magnetic fields of lunar multi‐ring impact basins

Abstract— We survey the magnetic fields of lunar multi‐ring impact basins using data from the electron reflectometer instrument on the Lunar Prospector spacecraft. As for smaller lunar craters, the primary signature is a magnetic low that extends to ?1.5–2 basin radii, suggesting shock demagnetization of relatively soft crustal magnetization. A secondary signature, as for large terrestrial basins, is the presence of central magnetic anomalies, which may be due to thermal remanence in impact melt rocks and/or shock remanence in the central uplift. The radial extent of the anomalies may argue for the former possibility, but the latter or a combination of the two are also possible. Central anomaly fields are absent for the oldest pre‐Nectarian basins, increase to a peak in early Nectarian basins, and decrease to a low level for Imbrian basins. If basin‐associated anomalies provide a good indication of ambient magnetic fields when the basins formed, this suggests the existence of a “magnetic era” (possibly due to a lunar core dynamo) similar to that implied by paleointensity results from returned lunar samples. However, the central basin anomalies suggest that the fields peaked in early Nectarian times and were low in Imbrian times, while samples provide evidence for high fields in Nectarian and early Imbrian times.     

The surficial nature of lunar swirls as revealed by the Mini-RF instrument

Lunar swirls are optically bright, sinuous albedo features found on the Moon. The Mini-RF synthetic aperture radar on the Lunar Reconnaissance Orbiter has provided a comprehensive set of X- and S-Band radar images of these enigmatic features, including the first radar observations of swirls on the farside of the Moon. A few general remarks can be made about the nature of the lunar swirls from this data set. First, the average radar properties of lunar swirls are identical to nearby non-swirl regions, in both total radar backscatter and circular polarization ratio (CPR). This implies that average centimeter-scale roughness and composition within the high-albedo portions of the swirls do not differ appreciably from the surroundings, and that the high optical reflectance of the swirls is related to a very thin surface phenomenon (less than several decimeters thick) not observable with X- or S-Band radar. Secondly, bright swirl material appears to be stratigraphically younger than a newly discovered impact melt flow at Gerasimovich D. This observation indicates that the swirls are capable of forming over timescales less than the age of the crater. The Mini-RF data set also provides clues to the origin of the lunar swirls. In at least one case, the presence of an enhanced crustal magnetic field appears to be responsible for the preservation of a high-albedo ejecta blanket around an otherwise degraded crater, Descartes C. The degree of degradation of Descartes C suggests it should not be optically bright, yet it is. This implies that the enhanced albedo is related to its location within a magnetic anomaly, and hence supports an origin hypothesis that invokes interaction between the solar wind and the magnetic anomaly.     

The case for an Imbrium origin of the Apollo thorium-rich impact-melt breccias

Abstract— Mafic, Th-rich impact-melt breccias, most of which are identified with the composition known as low-K Fra Mauro (LKFM), are the most common rock type in the nonmare regoliths of the Apollo lunar landing sites. The origin of mafic impact-melt breccias bears on many lunar problems: the nature of the late meteoroid bombardment (cataclysm); the spatial distribution of KREEP, both near the surface and at depth; the ages of the major basins; and the composition of the early crust of the nearside lunar highlands. Thus, it is crucial that the origin of mafic impact-melt breccias be accurately understood. Because of both intra- and intersite differences in compositions of mafic impact-melt breccia samples, apparent differences in crystallization age, and differences in siderophile-element ratios, previous studies have argued that either (1) most mafic impact-melt breccias are the products of several large craters local to the site at which they were found but that some are of basin origin or that (2) they are all from the Imbrium (Apollos 14 and 15), Nectaris (Apollo 16), and Serenitatis (Apollo 17) basins. Here, we reconsider the hypothesis that virtually all of the Th-rich, mafic impact-melt breccias from the Apollo missions are products of the Imbrium impact. Ejecta deposit modeling based on modern crater scaling indicates that the Imbrium event produced ejecta deposits that average hundreds of meters thick or more at all Apollo highland sites, which is thicker than some previous estimates. Substantial amounts of Imbrium ejecta should have been sampled at every Apollo highland site. We suggest that the mafic impact-melt breccias may be the principal form of those ejecta. The Imbrium projectile impacted into Th-rich material that we regard as part of a unique, mafic, lunar geochemical province we call the High-Th Oval Region. Based on the surface distribution of Th, only basins within the High-Th Oval Region excavated Th-rich material; the Th concentrations of the highlands as observed by the Apollo orbiting γ-ray experiments are consistent with the estimates from ejecta modeling. Of the younger basin-forming impacts, only Imbrium was large enough to produce the copious amount of melt required by the ubiquitous presence of mafic impact-melt breccias in the Apollo-sampled regolith. The High-Th Oval Region still may have been molten or hot at shallow depths ～4 Ga ago when the Imbrium projectile struck. We reason that compositional heterogeneity of ejected melt breccia is to be expected under these circumstances. We argue that siderophile-element “fingerprints” of mafic impact-melt breccias are not inconsistent with production of all common types by a single projectile. We suggest that the narrow range of ages of 3.7–4.0 Ga for all successfully dated mafic impact-melt breccias may reflect a single event whose age is difficult to measure precisely, rather than a number of discrete impact events closely spaced in time, such that reported age variations among mafic impact-melt breccias reflect the ability to measure ⁴⁰Ar/³⁹Ar ages with greater precision than the accuracy with which measured portions of mafic impact-melt breccias have recorded the time of their formation.     

Stratigraphy of the Caloris basin,Mercury

The 1300-km-diameter Caloris impact basin is surrounded by well-defined ejecta units that can be recognized from more than 1000 km, radially outward from the basin edge. A formal rock stratigraphic nomenclature is proposed for the Caloris ejecta units, which are collectively called the Caloris Group. Each of the individual formations within the Group are described and compared to similar rock units associated with the lunar Imbrium and Orientale basins. A crater degradation chronology, linked the the Caloris event, is also proposed to assist in stratigraphic correlation on a Mercury-wide basis.     

A Large Basin on the Near Side of the Moon

The differences between the surface structure of the near side and the far side of the Moon have been topics of interest ever since photographs of the far side have been available. One recurrent hypothesis is that a large impact on the near side has deposited ejecta on the far side, resulting in thicker crust there. Specific proposals were made by P.H. Cadogan for the Gargantuan Basin and by E.A. Whitaker for the Procellarum Basin. Despite considerable effort, no consensus has been reached on the existence of these basins. The problem of searching for such a basin is one of finding its signature in a somewhat chaotic field of basin and crater impacts. The search requires a model of the topographic shape of an impact basin and its ejecta field. Such a model is described, based on elevation data of lunar basins collected by the Lidar instrument of the Clementine mission and crustal thickness data derived from tracking Clementine and other spacecraft. The parameters of the model are scaled according to the principles of dimensional analysis and isostatic compensation in the early Moon. The orbital dynamics of the ejecta and the curvature of the Moon are also taken into account. Using such a scaled model, a search for the best fit for a large basin led to identification of a basin whose cavity covers more than half the Moon, including the area of all of the impact basins visible on the near side. The center of this basin is at 22 degrees east longitude and 8.5 degrees north latitude and its average radius is approximately 3,160 km. It is a megabasin, a basin that contains other basins (the far side South Pole-Aitken Basin also qualifies for that designation). It has been called the Near Side Megabasin. Much of the material ejected from the basin escaped the Moon, but the remainder formed an ejecta blanket that covered all of the far side beyond the basin rim to a depth of from 6 to 30 km. Isostatic compensation reduced the depth relative to the mean surface to a range of 1–5 km, but the crustal thickness data reveals the full extent of the original ejecta. The elevation profile of the ejecta deposited on the far side, together with modification for subsequent impacts by known basins (especially the far side South Pole-Aitken Basin) matches the available topographic data to a high degree. The standard deviation of the residual elevations (after subtracting the model from the measured elevations) is about one-half of the standard deviation of the measured elevations. A section on implications discusses the relations of this giant basin to known variations in the composition, mineralogy, and elevations of different lunar terranes.     

The apparent lack of lunar-like swirls on Mercury: Implications for the formation of lunar swirls and for the agent of space weathering

Images returned by the MESSENGER spacecraft from the Mercury flybys have been examined to search for anomalous high-albedo markings similar to lunar swirls. Several features suggested to be swirls on the basis of Mariner 10 imaging (in the craters Handel and Lermontov) are seen in higher-resolution MESSENGER images to lack the characteristic morphology of lunar swirls. Although antipodes of large impact basins on the Moon are correlated with swirls, the antipodes of the large impact basins on Mercury appear to lack unusual albedo markings. The antipodes of Mercury’s Rembrandt, Beethoven, and Tolstoj basins do not have surface textures similar to the “hilly and lineated” terrain found at the Caloris antipode, possibly because these three impacts were too small to produce obvious surface disturbances at their antipodes. Mercury does have a class of unusual high-reflectance features, the bright crater-floor deposits (BCFDs). However, the BCFDs are spectral outliers, not simply optically immature material, which implies the presence of material with an unusual composition or physical state. The BCFDs are thus not analogs to the lunar swirls. We suggest that the lack of lunar-type swirls on Mercury supports models for the formation of lunar swirls that invoke interaction between the solar wind and crustal magnetic anomalies (i.e., the solar-wind standoff model and the electrostatic dust-transport model) rather than those models of swirl formation that relate to cometary impact phenomena. If the solar-wind standoff hypothesis for lunar swirls is correct, it implies that the primary agent responsible for the optical effects of space weathering on the Moon is solar-wind ion bombardment rather than micrometeoroid impact.     

Remote sensing and geological studies of the Hadley‐Apennine region of the Moon

Abstract— We have used data from the Clementine and Lunar Prospector spacecraft in conjunction with reflectance spectra collected with Earth‐based telescopes to study the geology of the Hadley‐Apennine portion of the lunar Imbrium basin. The Apennine Mountains and the Imbrium backslope are composed of Imbrium basin ejecta with a noritic or anorthositic norite composition. We find that the two major facies of Imbrium ejecta, the Apenninus material and the Alpes Formation, differ in iron and titanium content. “Pure” anorthosite has tentatively been identified in the ejecta of the crater Conon, based on low‐iron content. A difference in Th and rare earth element (REE) abundance between the northeast Apennine Mountains (lower) and the southwest Apennines (higher) is noted. Pyroclastic deposits are common in the region and are dominated by mare basalt material, probably plug rock ejected in vulcanian eruptions. The Apennine Bench Formation, which is likely to be a deposit of non‐mare volcanic material, has an Fe, Ti and Th composition consistent with that of Apollo 15 KREEP basalt samples thought to be fragments of the Bench. Aristillus crater is a Th and REE hot spot, and the stratigraphy of the impact target site has been reconstructed from knowledge of the composition of the crater interior and exterior deposits. We infer that the target consisted of highland basement, KREEP plutonics and volcanics, and both high‐ and low‐Ti mare basalt.     

Crustal thickness of the Moon: New constraints from gravity inversions using polyhedral shape models

A new method is presented for estimating crustal thickness from gravity and topography data on the Moon. By calculating analytically the exterior gravitational field for a set of arbitrarily shaped polyhedra, relief along the crust-mantle interface can be inverted for that satisfies the observational constraints. As this method does not rely upon filtering the Bouguer anomaly, which was required with previous inversions performed in the spherical-harmonic domain, and as the dramatic variations in spatial quality of the lunar gravity field are taken into account, our crustal thickness model more faithfully represents the available data. Using our model results, we investigate various aspects of the prominent nearside impact basins. The crustal thickness in the central portion of the Orientale and Crisium basins is found to be close to zero, suggesting that these basins could have conceivably excavated into the lunar mantle. Furthermore, given our uncertain knowledge of the density of the crust and mantle, it is possible that the Humorum, Humboldtianum, Nectaris, and Smythii basins could have excavated all the way through the crust as well. The crustal structure for most of the young impact basins implies a depth/diameter ratio of about 0.08 for their excavation cavities. As noted in previous studies, however, the crustal structure of Imbrium and Serenitatis is anomalous, which is conceivably a result of enhanced rates of post-impact viscous relaxation caused by the proximity of these basins to the Procellarum KREEP Terrane. Impact basins older than Smythii show little or no evidence for crustal thinning, suggesting that these ancient basins were also affected by high rates of viscous relaxation resulting from higher crustal temperatures early in the Moon's evolution. The lithosphere beneath many young basins is found to be supporting a downward directed force, even after the load associated with the mare basalts is removed, and this is plausibly attributed to superisostatic uplift of the crust-mantle interface. Those basins that are close to achieving a pre-mare isostatic state are generally found to reside within, or close to, the Procellarum KREEP Terrane.     

Primary and secondary magnetizations in lunar rocks - Implications for the ancient magnetic field of the Moon

The nature of the ancient magnetic field of the Moon, in which lunar rocks acquired their remanent magnetism, has emerged as an important potential source of evidence, if somewhat controversial, for a lunar core which at a period in the Moon's history was the source of the magnetic field. Many of the lunar rocks possess a stable, primary remanence (NRM) with characteristics consistent with and indicative of thermo-remanent magnetization, acquired when the rocks cooled in an ambient magnetic field. Also present are secondary components of magnetization, one type of which appears to have been acquired between collection on the Moon and reception in the laboratory and others which were apparently acquired on the Moon.An important question to be answered is whether meteorite impacts play any part in lunar magnetism, either in modifying pre-existing magnetizations or by imparting a shock remanent magnetism (SRM) in a transient magnetic field associated with the impact. With current knowledge, SRM, in either a global lunar magnetic field of a transient field, and TRM cannot be distinguished, and in the paper the secondary magnetization characteristic of lunar rocks are examined to investigate whether their nature favours the presence of a permanent lunar magnetic field or whether they are consistent with an origin as a transient field-generated SRM.Besides terrestrial processes of secondary magnetization, such as viscous, chemical and partial thermoremanent magnetization, possible processes peculiar to the Moon are discussed and their likely importance assessed in relation to lunar sample history. The nature of the secondary magnetizations appear to be best explained on the assumption that they are due to one or more of the processes that require an ambient lunar field, namely viscous, partial thermoremanent and shock magnetization. When associated with other types of evidence obtained from lunar magnetism studies, investigations of lunar sample remanent magnetism now favours the existence of an ancient lunar magnetic field.     

Compositional and temporal investigation of exposed lunar basalts in the Mare Imbrium region

This paper presents an updated stratigraphical and compositional study of the exposed maria within the Imbrium basin on the Moon. Clementine multispectral data were employed to derive TiO₂ and FeO wt% abundance estimates of potentially distinct basaltic flows. Additionally, NASA Lunar Orbiter images were used to estimate flow ages using crater count statistics. Mare Imbrium shows evidence of a complex suite of low to high-Ti basaltic lava units infilling the basin over an 800 million year timescale. More than a third (37%) of identified mare basalts were found to contain 1-3 wt% TiO₂. Two other major mare lithological units (representing about 25% of the surface each) show TiO₂ values between 3-5 and 7-9 wt%. The dominant fraction (55%) of the sampled maria contain FeO between 16 and 18 wt%, followed by 27% of maria having 18-20 wt% and the remaining 18%, 14-16 wt% FeO. A crater frequency count (for diameters >500 m) shows that in three quarters of the sampled mare crater counts range between 3.5 and 5.5×¹⁰⁻² per km², which translates, according to a lunar cratering model chronology, into estimated emplacement ages between ∼3.3 and 2.5 Ga. A compositional convergence trend between the variations of iron and titanium oxides was identified, in particular for materials with TiO₂ and FeO content broadly above 5 and 17 wt%, respectively, suggesting a related petrogenesis and evolution. According to these findings, three major periods of mare infill are exposed in the Imbrium basin; despite each period showing a range of basaltic compositions (classified according to their TiO₂ content), it is apparent that, at least within these local geological settings, the igneous petrogenesis generally evolved through time towards more TiO₂- and FeO-rich melts.     

The SMART-1 lunar impact

The SMART-1 spacecraft impacted the Moon on 3rd September 2006 at a speed of 2 km s⁻¹ and at a very shallow angle of incidence (∼1°). The resulting impact crater is too small to be viewed from the Earth; accordingly, the general crater size and shape have been determined here by laboratory impact experiments at the same speed and angle of incidence combined with extrapolating to the correct size scale to match the SMART-1 impact. This predicts a highly asymmetric crater approximately 5.5-26 m long, 1.9-9 m wide, 0.23-1.5 m deep and 0.71-6.9 m³ volume. Some of the excavated mass will have gone into crater rim walls, but 0.64-6.3 m³ would have been ejecta on ballistic trajectories corresponding to a cloud of 2200-21,800 kg of lunar material moving away from the impact site. The shallow Messier crater on the Moon is similarly asymmetric and is usually taken as arising from a highly oblique impact. The light flash from the impact and the associated ejecta plume were observed from Earth, but the flash magnitude was not obtained, so it is not possible to obtain the luminous efficiency of the impact event.     

Geologic setting of Boulder 1, Station 2, Apollo 17 landing site

Boulder 1 at Station 2 is one of three boulders sampled by Apollo 17 at the base of the South Massif, which rises 2.3 km above the floor of a linear valley interpreted as a graben formed by deformation related to the southern Serenitatis impact. The boulders probably rolled from the upper part of the massif after emplacement of the light mantle. Orbital gravity data and photogeologic reinterpretation suggest that the Apollo 17 area is located approximately on the third ring of the southern Serenitatis basin, approximately 1.25 times larger than the analogous but fresher Orientale basin structure. The massif exposures are interpreted to represent the upper part of thick ejecta deposited by the southern Serenitatis impact near the rim of the transient cavity. Basin ring structure and the radial grabens that give the massifs definition were imposed on this ejecta at a slightly later stage in the basin-forming process. There is no clear-cut compositional, textural, or photogeologic evidence that Imbrium ejecta was collected at the Apollo 17 site.     

On estimating contributions of basin ejecta to regolith deposits at lunar sites

Abstract— We have developed a quantitative model for predicting characteristics of ejecta deposits that result from basin‐sized cratering events. This model is based on impact crater scaling equations (Housen, Schmitt, and Holsapple 1983; Holsapple 1993) and the concept of ballistic sedimentation (Oberbeck 1975), and takes into account the size distribution of the individual fragments ejected from the primary crater. Using the model, we can estimate, for an area centered at the chosen location of interest, the average distribution of thicknesses of basin ejecta deposits within the area and the fraction of primary ejecta contained within the deposits. Model estimates of ejecta deposit thicknesses are calibrated using those of the Orientale Basin (Moore, Hodges, and Scott 1974) and of the Ries Basin (Hörz, Ostertag, and Rainey 1983). Observed densities of secondary craters surrounding the Imbrium and Orientale Basins are much lower than the modeled densities. Similarly, crater counts for part of the northern half of the Copernicus secondary cratering field are much lower than the model predicts, and variation in crater densities with distance from Copernicus is less than expected. These results suggest that mutual obliteration erases essentially all secondary craters associated with the debris surge that arises from the impacting primary fragments during ballistic sedimentation; if so, a process other than ballistic sedimentation is needed to produce observable secondary craters. Regardless, our ejecta deposit model can be useful for suggesting provenances of sampled lunar materials, providing information complementary to photogeological and remote sensing interpretations, and as a tool for planning rover traverses (e.g., Haskin et al. 1995, 2002).