The geology and mineralogy of the Anuri kimberlite, Nunavut, Canada

The 613±6 Ma Anuri kimberlite is a pipelike body comprising two lobes with a combined surface area of approximately 4–5 ha. The pipe is infilled with two contrasting rock types: volcaniclastic kimberlite (VK) and, less common, hypabyssal kimberlite (HK).

The HK is an archetypal kimberlite composed of macrocrysts of olivine, spinel, mica, rare eclogitic garnet and clinopyroxene with microphenocrysts of olivine and groundmass spinel, phlogopite, apatite and perovskite in a serpentine–calcite–phlogopite matrix. The Ba enrichment of phlogopite, the compositional trends of both primary spinel and phlogopite, as well as the composition of the mantle-derived xenocrysts, are also characteristic of kimberlite. The present-day country rocks are granitoids; however, the incorporation of sedimentary xenoliths in the HK shows that the Archean granitoid basement terrain, at least locally, was capped by younger Proterozoic sediments at the time of emplacement. The sediments have since been removed by erosion. HK is confined to the deeper eastern parts of the Anuri pipe. It is suggested that the HK was emplaced prior to the dominant VK as a separate phase of kimberlite. The HK must have ascended to high stratigraphic levels to allow incorporation of Proterozoic sediments as xenoliths.

Most of the Anuri kimberlite is infilled with VK which is composed of variable proportions of juvenile lapilli, discrete olivine macrocrysts, country rock xenoliths and mantle-derived xenocrysts. It is proposed that the explosive breakthrough of a second batch of kimberlite magma formed the western lobe resulting in the excavation of the main pipe. Much of the resulting fragmented country rock material was deposited in extra crater deposits. Pyroclastic eruption(s) of kimberlite must have occurred to form the common juvenile lapilli present in the VKs. The VK is variable in nature and can be subdivided into four types: volcaniclastic kimberlite breccia, magmaclast-rich volcaniclastic kimberlite breccia, finer grained volcaniclastic kimberlite breccia and lithic-rich volcaniclastic kimberlite breccia. The variations between these subtypes reflect different depositional processes. These processes are difficult to determine but could include primary pyroclastic deposition and/or resedimentation.

There is some similarity between Anuri and the Lac de Gras kimberlites, with variable types of VK forming the dominant infill of small, steep-sided pipes excavated into crystalline Archean basement and sedimentary cover.     

Geology of the Gahcho Kué kimberlite pipes, NWT, Canada: root to diatreme magmatic transition zones

The Cambrian Gahcho Kué kimberlite cluster includes four main pipes that have been emplaced into the Archaean basement granitoids of the Slave Craton. Each of the steep-sided pipes were formed by the intrusion of several distinct phases of kimberlite in which the textures vary from hypabyssal kimberlite (HK) to diatreme-facies tuffisitic kimberlite breccia (TKB). The TKB displays many diagnostic features including abundant unaltered country rock xenoliths, pelletal lapilli, serpentinised olivines and a matrix composed of microlitic phlogopite and serpentine without carbonate. The HK contains common fresh olivine set in a groundmass composed of monticellite, phlogopite, perovskite, serpentine and carbonate. A number of separate phases of kimberlite display a magmatic textural gradation from TKB to HK, which is characterised by a decrease in the proportion of pelletal lapilli and country rock xenoliths and an increase in groundmass crystallinity, proportion of fresh olivine and the degree of xenolith digestion.

The pipe shapes and infills of the Gahcho Kué kimberlites are similar to those of the classic South African pipes, particularly those of the Kimberley area. Similar intrusive magmatic emplacement processes are proposed in which the diatreme-zone results from the degassing, after breakthrough, of the intruding magma column. The transition zones represent ‘frozen’ degassing fronts. The style of emplacement of the Gahcho Kué kimberlites is very different from that of many other pipes in Canada such as at Lac de Gras, Fort à la Corne or Attawapiskat.     

The geology of kimberlite pipes of the Ekati property, Northwest Territories, Canada

This paper reviews key characteristics of kimberlites on the Ekati property, NWT, Canada. To date 150 kimberlites have been discovered on the property, five of which are mined for diamonds. The kimberlites intrude Archean basement of the central Slave craton. Numerous Proterozoic diabase dykes intrude the area. The Precambrian rocks are overlain by Quaternary glacial sediments. No Phanerozoic rocks are present. However, mudstone xenoliths and disaggregated sediment within the kimberlites indicate that late-Cretaceous and Tertiary cover (likely <200 m) was present at the time of emplacement. The Ekati kimberlites range in age from 45 to 75 Ma. They are mostly small pipe-like bodies (surface area mostly <3 ha but up to 20 ha) that typically extend to projected depths of 400–600 m below current surface. Pipe morphologies are strongly controlled by joints and faults. The kimberlites consist primarily of variably bedded volcaniclastic kimberlite (VK). This is dominated by juvenile constituents (olivine and lesser kimberlitic ash) and variable amounts of exotic sediment (primarily mud), with minor amounts of xenolithic wall-rock material (generally <5%). Kimberlite types include: mud-rich resedimented VK (mRVK); olivine-rich VK (oVK); sedimentary kimberlite; primary VK (PVK); tuffisitic kimberlite (TK) and magmatic kimberlite (MK). The presence and arrangement of these rock types varies widely. The majority of bodies are dominated by oVK and mRVK, but PVK is prominent in the lower portions of certain kimberlites. TK is rare. MK occurs primarily as precursor dykes but, in a few cases, forms pipe-filling intrusions. The internal geology of the kimberlites ranges from simple single-phase pipes (RVK or MK), to complex bodies with multiple, distinct units of VK. The latter include pipes infilled with steep, irregular VK blocks/wedges and at least one case in which the pipe is occupied by well-defined sub-horizontal VK phases, including a unique, 100-m-thick graded sequence. The whole-rock compositions of VK samples suggest significant loss of kimberlitic fines during eruption followed by variable dilution by surface sediment and concurrent incorporation of kimberlitic ash. Diamond distribution within the kimberlites reflects the amount and nature of mantle material sampled by individual kimberlite phases, but is modified considerably by eruption and depositional processes. The characteristics of the Ekati kimberlites are consistent with a two-stage emplacement process: (1) explosive eruption/s causing vent clearing followed by formation of a significant tephra rim/cone of highly fragmented, olivine-enriched juvenile material with varying amounts of kimberlitic ash and surface sediments (predominantly mud); and (2) infilling of the vent by direct deposition from the eruption column and/or resedimentation of crater rim materials. The presence of less fragmented, juvenile-rich PVK in the lower portions of certain pipes and the intrusion of large volumes of MK to shallow levels in some bodies suggest emplacement of relatively volatile-depleted, less explosive kimberlite in the later stages of pipe formation and/or filling. Explosive devolatilisation of CO₂-rich kimberlite magma is interpreted to have been the dominant eruption mechanism, but phreatomagmatism is thought to have played a role and, in certain cases, may have been dominant.     

Letšeng diamond mine,Lesotho: a variant of Kimberley-type pyroclastic kimberlite emplacement

The Letšeng Diamond Mine comprises two ~91 Ma kimberlite pipes. An update of the geology is presented based on the 2012–2017 detailed investigation of open pit exposures and all available drillcores which included mapping, logging and petrography. Each of the steep-sided volcanic pipes comprises a number of phases of kimberlite with contrasting diamond contents which were formed by the emplacement of at least four batches of mantle-derived magma. The resulting range of textures includes resedimented volcaniclastic kimberlite (RVK), Kimberley-type pyroclastic kimberlite (KPK), coherent kimberlite (CK) and minor amounts of hypabyssal kimberlite (HK). The pipes are compared with KPK occurrences from southern Africa and worldwide. Many features of the Letšeng pipes are similar to KPK infilled pipes particularly those of the widespread Cretaceous kimberlite province of southern Africa. The differences displayed at Letšeng compared to other large KPK pipe infills described from around the world are attributed to the marginal or melnoitic nature of the magma and the upper diatreme to crater setting of the Letšeng pipes, where processes become extrusive. It is concluded that the pipes comprise a variant of Kimberley-type pyroclastic kimberlite emplacement. The classification of many of the Letšeng rocks as KPK is important for developing the internal geology of the pipes as well as for predicting the distribution of diamonds within the bodies.

     

Distinct kimberlite pipe classes with contrasting eruption processes

Field and Scott Smith [Field, M., Scott Smith, B.H., 1999. Contrasting geology and near-surface emplacement of kimberlite pipes in southern Africa and Canada. Proc. 7th Int. Kimb. Conf. (Eds. Gurney et al.) 1, 214–237.] propose that kimberlite pipes can be grouped into three types or classes. Classical or Class 1 pipes are the only class with characteristic low temperature, diatreme-facies kimberlite in addition to hypabyssal- and crater-facies kimberlite. Class 2 and 3 pipes are characterized only by hypabyssal-and crater-facies kimberlite. In an increasing number of Class 1 pipes a new kimberlite facies, transitional-facies kimberlite, is being found. In most cases this facies forms a zone several metres wide at the interface between the hypabyssal- and diatreme-facies. The transitional-facies exhibits textural and mineralogical features, which are continuously gradational between the hypabyssal and the diatreme types. The textural gradations are from a coherent magmatic texture to one where the rock becomes increasingly magmaclastic and this is accompanied by concomitant mineralogical gradations involving the decline and eventual elimination of primary calcite at the expense of microlitic diopside. Both transitional- and diatreme-facies kimberlites are considered to have formed in situ from intruding hypabyssal kimberlite magma as a consequence of exsolution of initially CO₂-rich volatiles from the volatile-rich kimberlite magma. The transitional-facies is initiated by volatile exsolution at depths of about 3 km below the original surface. With subsequent cracking through to the surface and resultant rapid decompression, the further catastrophic exsolution of volatiles and their expansion leads to the formation of the diatreme facies. Thus diatreme-facies kimberlite and Class 1 pipes are emplaced by essentially magmatic processes rather than by phreatomagmatism.

Distinctly different petrographic features characterize crater-facies kimberlite in each of the three pipe classes. In crater-facies kimberlites of Class 1 pipes, small pelletal magmaclasts and abundant microlitic diopside are characteristic. These features appear to reflect the derivation of the crater-facies material from the underlying diatreme zone. Most Class 2 pipes have shallow craters and the crater-facies rocks are predominantly pyroclastic kimberlites with diagnostic amoeboid lapilli, which are sometimes welded and have vesicles as well as glass. Possible kimberlite lava also occurs at two Class 2 pipes in N Angola. The possible presence of lava as well as the features of the pyroclastic kimberlite is indicative of hot kimberlite magma being able to rise to levels close to the surface to form Class 2 pipes. Most Class 3 kimberlites have very steep craters and crater-facies rocks are predominantly resedimented volcaniclastic kimberlites, in some cases characterized by the presence of abundant angular magmaclasts, which are petrographically very similar to typical hypabyssal-facies kimberlite found in Class 1 pipes. The differences in crater-facies kimberlite of the three classes of pipe reflect different formation and depositional processes as well as differences in kimberlite composition, specifically volatile composition. Kimberlite forming pipe Classes 1 and 3 is thought to be relatively water-rich and is emplaced by processes involving magmatic exsolution of volatiles. The kimberlite magma forming Class 2 pipes is CO₂-rich, can rise to shallow levels, and can initiate phreatomagmatic emplacement processes.     

Geology of the Mwadui kimberlite, Shinyanga district, Tanzania

The Mwadui pipe represents the largest diamondiferous kimberlite ever mined and is an almost perfectly preserved example of a kimberlitic crater in-fill, albeit without the tuff ring.

The geology of Mwadui can be subdivided into five geological units, viz. the primary pyroclastic kimberlite (PK), re-sedimented volcaniclastic kimberlite deposits (RVK), granite breccias (subdivided into two units), the turbidite deposits, and the yellow shales listed in approximate order of formation. The PK can be further subdivided into two units—lithic-rich ash and lapilli tuffs which dominate the succession, and lithic-poor juvenile-rich ash and lapilli tuffs. The lower crater is well bedded down to at least 684 m from present surface (extent of current drill data). The bedding is defined by the presence of juvenile-rich lapilli tuffs vs. lithic-rich lapilli tuffs, and the systematic variation in granite content and clast size within much of the lithic-rich lapilli tuffs. Four distinct types of bedding have been identified in the pyroclastic deposits. Diffuse zones characterised by increased granite abundance and size, and upward-fining units, represent the dominant types throughout the deposit.

Lateral heterogeneity was observed, in addition to the vertical changes, suggesting that the eruption was quite heterogeneous, or that more than one vent may have been present. The continuous nature of the bedding in the pyroclastic material and the lack of ash-partings suggest deposition from a high concentration (ejecta), sustained eruption column at times, e.g. the massive, very diffusely stratified deposits. The paucity of tractional bed forms suggest near vertical particle trajectories, i.e. a clear air-fall component, but the poorly sorted, matrix-supported nature of the deposits suggest that pyroclastic flow and/or surge processes may also have been active during the eruption.

Available diamond sampling data were examined and correlated with the geology. Data derive from the old 120 (37 m), 200 (61 m), 300 (92 m) and 1200 ft (366 m) levels, pits sunk during historical mining operations, drill logs, as well as more recent bench mapping. Correlating macro-diamond sample data and geology shows a clear relationship between diamond grade and lithology. Localised enrichment and dilution of the primary diamond grade has taken place in the upper reworked volcaniclastic deposits due to post-eruptive sedimentary in-fill processes. Clear distinction can be drawn between upper (re-sedimented) and lower (pyroclastic) crater deposits at Mwadui, both from a geological and diamond grade perspective.

Finally, an emplacement model for the Mwadui kimberlite is proposed. Geological evidence suggests that little or no sedimentary cover existed at the time of emplacement. The nature of the bedding within the pyroclastic deposits and the continuity of the bedding in the vertical dimension suggest that the eruption was continuous, but that the eruption column may have been heterogeneous, both petrologically as well as geometrically. Volcanic activity appears to have ceased thereafter and the crater was gradually filled with granite debris from the unstable crater walls and re-sedimented volcaniclastic material derived from the tuff ring.

The Mwadui kimberlite exhibits marked similarities compared to the Orapa kimberlite in Botswana.     

Geology and diamond distribution of the 140/141 kimberlite, Fort à la Corne, central Saskatchewan, Canada

The Cretaceous age Fort à la Corne (FALC) kimberlite province comprises at least 70 bodies, which were emplaced near the edge of the Western Canadian Interior Seaway during cycles of marine transgression and regression. Many of the bodies were formed during a marine regression by a two-stage process, firstly the excavation of shallow, but wide, craters and then subsequent infilling by xenolith-poor, crater-facies, subaerial, primary pyroclastic kimberlite. The bodies range in size up to 2000 m in diameter but are mainly less than 200 m thick and thus comprise relatively thin, but high volume, pyroclastic kimberlite deposits. Each body is composed of contrasting types of kimberlite reflecting different volcanic histories and, therefore, are considered separately.

The 140/141 kimberlite is the largest delineated body in the province, estimated to have an areal extent below glacial Quaternary sediments in excess of 200 ha. The infilling of the 140/141 crater is complex, resulting from multiple phases of kimberlite. The central part of the infill is dominated by several contrasting phases of kimberlite. One of these phases is a primary pyroclastic airfall mega-graded bed up to 130 m in thickness. The constituents grade in size from very fine to coarse macrocrystic kimberlite, through to a basal breccia. The mega-graded bed is a widespread feature within parts of the body examined to date and at this current stage of evaluation appears to explain a variable diamond distribution within a tested portion of the pipe. A second different phase of kimberlite is interpreted as representing a younger nested crater within the mega-graded bed. Centrally located thicker intersections (>450 m) of this younger kimberlite may indicate a vent for the kimberlite crater. The thickness of the mega-graded bed increases with proximity to the younger kimberlite in the study area.

Macrodiamond minibulk sample grades from the mega-graded bed have been obtained from nine large diameter drill holes, located within the northwest part of the body from an area of 20 ha, which represents approximately 10% of the currently modeled kimberlite outline. Diamond grade increases with depth within the mega-graded bed and also increases, within the same unit, towards the centrally positioned younger kimberlite. Macrodiamond sample grades vary from low at the top of the mega-graded bed, to considerably higher grades near the base. Total sample grade per drill hole varies from moderate near the vent feature to lower grades 200–300 m from the vent feature. Macrodiamond stone frequency measured in stones per tonne shows a pronounced relationship with depth and proximity to the vent feature within the mega-graded bed. There is a strong correlation between depth and increased stones per tonne, and a similar correlation between stones per tonne and proximity to the vent feature. The data supports the emplacement model of the mega-graded bed and, in turn, this information is useful in understanding the macrodiamond distribution within this bed.     

Geology of the Renard 2 pipe to 1000 m depth,Renard Mine,Québec,Canada: insights into Kimberley-type pyroclastic kimberlite emplacement

The Renard 2 pipe is currently the deepest-drilled and most extensively studied kimberlite body in the Renard cluster, central Québec, Canada, forming the major component of the Mineral Resource of Stornoway Diamond Corporation’s Renard Mine. Renard 2 is infilled with two distinct kimberlite units that exhibit Kimberley-type pyroclastic kimberlite and related textures. Hypabyssal kimberlite also occurs as smaller cross-cutting sheets and irregular intrusions. The units are distinguished by their rock textures, groundmass mineral assemblages, olivine macrocryst size distributions and replacement products, mantle and country rock xenolith contents, whole rock geochemical signatures, bulk densities and diamond grades. These differences are interpreted to reflect different mantle ascent and near-surface emplacement processes and are here demonstrated to be vertically continuous from present surface to over 1000 m depth. The distinctive petrological features together with sharp, steep and cross-cutting internal contact relationships, show that each unit was formed from a separate batch of mantle-derived kimberlite magma, and was completely solidified before subsequent emplacement of the later unit. The mineralogy and textures of the ultra-fine-grained interclast matrix are consistent with those described at numerous Kimberley-type pyroclastic kimberlite localities around the world and are interpreted to reflect rapid primary crystallization during emplacement of separate kimberlite magmatic systems. The units of fractured and brecciated country rock surrounding the main kimberlite pipe contain kimberlite-derived material including carbonate providing evidence of subsurface brecciation. Together these data show that Renard 2 represents the deeper parts of a Kimberley-type pyroclastic kimberlite pipe system and demonstrates that their diagnostic features result from magmatic crystallisation during subsurface volcanic emplacement processes.

     

The Late Cretaceous diamondiferous pyroclastic kimberlites from the Fort à la Corne (FALC) field,Saskatchewan craton,Canada: Petrology,geochemistry and genesis

The Late Cretaceous (ca. 100 Ma) diamondiferous Fort à la Corne (FALC) kimberlite field in the Saskatchewan (Sask) craton, Canada, is one of the largest known kimberlite fields on Earth comprising essentially pyroclastic kimberlites. Despite its discovery more than two decades ago, petrological, geochemical and petrogenetic aspects of the kimberlites in this field are largely unknown. We present here the first detailed petrological and geochemical data combined with reconnaissance Nd isotope data on drill-hole samples of five major kimberlite bodies. Petrography of the studied samples reveals that they are loosely packed, clast-supported and variably sorted, and characterised by the presence of juvenile lapilli, crystals of olivine, xenocrystal garnet (peridotitic as well as eclogitic paragenesis) and Mg-ilmenite. Interclast material is made of serpentine, phlogopite, spinel, carbonate, perovskite and rutile. The mineral compositions, whole-rock geochemistry and Nd isotopic composition (Nd: + 0.62 to − 0.37) are indistinguishable from those known from archetypal hypabyssal kimberlites. Appreciably lower bulk-rock CaO (mostly < 5 wt%) and higher La/Sm ratios (12–15; resembling those of orangeites) are a characteristic feature of these rocks. Their geochemical composition excludes any effects of significant crustal and mantle contamination/assimilation. The fractionation trends displayed suggest a primary kimberlite melt composition indistinguishable from global estimates of primary kimberlite melt, and highlight the dominance of a kimberlite magma component in the pyroclastic variants. The lack of Nb-Ta-Ti anomalies precludes any significant role of subduction-related melts/fluids in the metasomatism of the FALC kimberlite mantle source region. Their incompatible trace elements (e.g., Nb/U) have OIB-type affinities whereas the Nd isotope composition indicates a near-chondritic to slightly depleted Nd isotope composition. The Neoproterozoic (~ 0.6–0.7 Ga) depleted mantle (T_DM) Nd model ages coincide with the emplacement age (ca. 673 Ma) of the Amon kimberlite sills (Baffin Island, Rae craton, Canada) and have been related to upwelling protokimberlite melts during the break-up of the Rodinia supercontinent and its separation from Laurentia (North American cratonic shield). REE inversion modelling for the FALC kimberlites as well as for the Jericho (ca. 173 Ma) and Snap Lake (ca. 537 Ma) kimberlites from the neighbouring Slave craton, Canada, indicate all of their source regions to have been extensively depleted (~ 24%) before being subjected to metasomatic enrichment (1.3–2.2%) and subsequent small-degree partial melting. These findings are similar to those previously obtained on Mesozoic kimberlites (Kaapvaal craton, southern Africa) and Mesoproterozoic kimberlites (Dharwar craton, southern India). The striking similarity in the genesis of kimberlites emplaced over broad geological time and across different supercontinents of Laurentia, Gondwanaland and Rodinia, highlights the dominant petrogenetic role of the sub-continental lithosphere. The emplacement of the FALC kimberlites can be explained both by the extensive subduction system in western North America that was established at ca. 150 Ma as well as by far-field effects of the opening of the North Atlantic ocean during the Late Cretaceous.     

The crater-facies kimberlite system of Tokapal, Bastar District, Chhattisgarh, India

Discovery of diamondiferous kimberlites in the Mainpur Kimberlite Field, Raipur District, Chhattisgarh in central India, encouraged investigation of similar bodies in other parts of the Bastar craton. The earlier known Tokapal ultramafic intrusive body, located beyond the 19-km milestone in Tokapal village along the Jagdalpur–Geedam road, was reinterpreted as crater-facies kimberlite. Its stratigraphic position in the Meso-Neoproterozoic intracratonic sedimentary Indravati basin makes it one of the oldest preserved crater-facies kimberlite systems. Ground and limited subsurface data (dug-, tube-wells and exploratory boreholes) have outlined an extensive surface area (>550 ha) of the kimberlite. The morphological and surface color features of this body on enhanced satellite images suggest that there is a central feeder surrounded by a collar and wide pyroclastic apron. Exploration drilling indicates that the central zone probably corresponds to a vent overlain by resedimented volcaniclastic (epiclastic) rocks that are surrounded by a 2-km-wide spread of pyroclastic rocks (lapilli tuff, tuff/ash beds and volcaniclastic breccia). Drill-holes also reveal that kimberlitic lapilli tuffs and tuffs are sandwiched between the Kanger and Jagdalpur Formations and also form sills within the sedimentary sequence of the Indravati basin. The lapilli tuffs are commonly well stratified and display slumping. Base surges and lava flows occur in the southern part of the Tokapal system. The geochemistry and petrology of the rock correspond to average Group I kimberlite with a moderate degree of contamination. However, the exposed rock is intensely weathered and altered with strong leaching of mobile elements (Ba, Rb, Sr). Layers of vesicular fine-grained glassy material represent kimberlitic lava flows. Tuffs containing juvenile lapilli with pseudomorphed olivine macrocrysts are set in a talc–serpentine–carbonate matrix with locally abundant spinel and sphene. Garnet has not been observed, and phlogopite is very rare. Very limited microdiamond testing (two 18-kg samples) proved negative; however, the composition of chromite grains indicate crystallization in the diamond stability field.     

Macrocrystal phlogopite Rb–Sr dates for the Ekati property kimberlites, Slave Province, Canada: evidence for multiple intrusive episodes in the Paleocene and Eocene

New Rb–Sr age determinations using macrocrystal phlogopite are presented for 27 kimberlites from the Ekati property of the Lac de Gras region, Slave Province, Canada. These new data show that kimberlite magmatism at Ekati ranges in age from at least Late Paleocene (61 Ma) to Middle Eocene time (45 Ma). Older, perovskite-bearing kimberlites from Ekati extend this age range to Late Cretaceous time (74 Ma). Within this age range, emplacement episodes at 48, 51–53, 55–56 and 59–61 Ma can be recognized. Middle Eocene kimberlite magmatism of the previously dated Mark kimberlite (47.5 Ma) is shown to include four other pipes from the east-central Ekati property. A single kimberlite (Aaron) may be younger than the 47.5 Ma Mark kimberlite. The economically important Panda kimberlite is precisely dated in this study to be 53.3±0.6 Ma using the phlogopite isochron method, and up to six additional kimberlites from the central Ekati property have Early Eocene ages indistinguishable from that of Panda, including the Koala and Koala North occurrences. Late Paleocene 55–56 Ma kimberlite magmatism, represented by the Diavik kimberlite pipes adjacent to the southeastern Ekati property, is shown to extend onto the southeastern Ekati property and includes three, and possibly four, kimberlites. A precise eight-point phlogopite isochron for the Cobra South kimberlite yields an emplacement age of 59.7±0.4 Ma; eight other kimberlites from across the Ekati property have similar Late Paleocene Rb–Sr model ages. The addition of 27 new emplacement ages for kimberlites from the Ekati property confirms that kimberlite magmatism from the central Slave Province is geologically young, despite ages ranging back to Cambrian time from elsewhere in the Slave Province. With the available geochronologic database, Lac de Gras kimberlites with the highest diamond potential are currently restricted to the 51–53 and 55–56 Ma periods of kimberlite magmatism.     

Hydrothermal alteration of kimberlite by convective flows of external water

Kimberlite volcanism involves the emplacement of olivine-rich volcaniclastic deposits into volcanic vents or pipes. Kimberlite deposits are typically pervasively serpentinised as a result of the reaction of olivine and water within a temperature range of 130–400 °C or less. We present a model for the influx of ground water into hot kimberlite deposits coupled with progressive cooling and serpentisation. Large-pressure gradients cause influx and heating of water within the pipe with horizontal convergent flow in the host rock and along pipe margins, and upward flow within the pipe centre. Complete serpentisation is predicted for wide ranges of permeability of the host rocks and kimberlite deposits. For typical pipe dimensions, cooling times are centuries to a few millennia. Excess volume of serpentine results in filling of pore spaces, eventually inhibiting fluid flow. Fresh olivine is preserved in lithofacies with initial low porosity, and at the base of the pipe where deeper-level host rocks have low permeability, and the pipe is narrower leading to faster cooling. These predictions are consistent with fresh olivine and serpentine distribution in the Diavik A418 kimberlite pipe, (NWT, Canada) and with features of kimberlites of the Yakutian province in Russia affected by influx of ground water brines. Fast reactions and increases in the volume of solid products compared to the reactants result in self-sealing and low water–rock ratios (estimated at <0.2). Such low water–rock ratios result in only small changes in stable isotope compositions; for example, δO¹⁸ is predicted only to change slightly from mantle values. The model supports alteration of kimberlites predominantly by interactions with external non-magmatic fluids.     

Geology and resource development of the Kelvin kimberlite pipe,Northwest Territories,Canada

The early Cambrian to late Neoproterozoic Kelvin kimberlite pipe is located in the southeast of the Archean Slave Craton in northern Canada, eight km northeast of the Gahcho Kué diamond mine. Kelvin was first discovered in 2000 by De Beers Canada. Subsequent exploration undertaken by Kennady Diamonds Inc. between 2012 and 2016 resulted in the discovery of significant thicknesses of volcaniclastic kimberlite that had not previously been observed. Through extensive delineation drilling Kelvin has been shown to present an atypical, steep-sided inclined L-shaped pipe-like morphology with an overall dip of 15 to 20°. With a surface expression of only 0.08 ha Kelvin dips towards the northwest before turning north. The body (which remains open at depth) has been constrained to a current overall strike length of 700 m with varying vertical thickness (70 to 200 m) and width (30 to 70 m). Detailed core logging, petrography and microdiamond analysis have shown that the pipe infill comprises several phases of sub-horizontally oriented kimberlite (KIMB1, KIMB2, KIMB3, KIMB4, KIMB7 and KIMB8) resulting from multiple emplacement events. The pipe infill is dominated by Kimberley-type pyroclastic kimberlite or “KPK”, historically referred to as tuffisitic kimberlite breccia or “TKB”, with less common hypabyssal kimberlite (HK) and minor units with textures transitional between these end-members. An extensive HK sheet complex surrounds the pipe. The emplacement of Kelvin is believed to have been initiated by intrusion of this early sheet system. The main pipe-forming event and formation of the dominant KPK pipe infill, KIMB3, was followed by late stage emplacement of additional minor KPK and a hypabyssal to transitional-textured phase along the upper contact of the pipe, cross-cutting the underlying KIMB3. Rb-Sr age dating of phlogopite from a late stage phase has established model ages of 531 ± 8 Ma and 546 ± 8 Ma. Texturally and mineralogically, the Kelvin kimberlite is similar to other KPK systems such as the Gahcho Kué kimberlites and many southern African kimberlites; however, the external morphology, specifically the sub-horizontal inclination of the pipe, is unique. The morphology of Kelvin and the other kimberlites in the Kelvin-Faraday cluster defines a new type of exploration target, one that is likely not unique to the Kennady North Project area. Extensive evaluation work by Kennady Diamonds Inc. has resulted in definition of a maiden Indicated Mineral Resource for Kelvin of 8.5 million tonnes (Mt) of kimberlite at an average grade of 1.6 carats per tonne (cpt) with an average diamond value of US$ 63 per carat (ct).

     

Sedimentologic and stratigraphic constraints on emplacement of the Star Kimberlite, east–central Saskatchewan

Diamond-bearing kimberlites in the Fort à la Corne region, east–central Saskatchewan, consist primarily of extra-crater pyroclastic deposits which are interstratified with Lower Cretaceous (Albian and Cenomanian) marine, marginal marine and continental sediments. Approximately 70 individual kimberlite occurrences have been documented. The Star Kimberlite, occurring at the southeastern end of the main Fort à la Corne trend, has been identified as being of economic interest, and is characterized by an excellent drill core database. Integration of multi-disciplinary data-sets has helped to refine and resolve models for emplacement of the Star Kimberlite. Detailed core logging has provided the foundation for sedimentological and volcanological studies and for construction of a regionally consistent stratigraphic and architectural framework for the kimberlite complex. Micropaleontologic and biostratigraphic analysis of selected sedimentary rocks, and U–Pb perovskite geochronology on kimberlite samples have been integrated to define periods of kimberlite emplacement. Radiometric age determination and micropaleontologic evidence support the hypothesis that multiple kimberlite eruptive phases occurred at Star. The oldest kimberlite in the Star body erupted during deposition of the predominantly continental strata of the lower Mannville Group (Cantuar Formation). Kimberlites within the Cantuar Formation include terrestrial airfall deposits as well as fluvially transported kimberlitic sandstone and conglomerate. Successive eruptive events occurred contemporaneous with deposition of the marginal marine upper Mannville Group (Pense Formation). Kimberlites within the Pense Formation consist primarily of terrestrial airfall deposits. Fine- to medium-grained cross-stratified kimberlitic (olivine-dominated) sandstone in this interval reflects reworking of airfall deposits during a regional marine transgression. The location of the source feeder vents of the Cantuar and Pense kimberlite deposits has not been identified. The youngest and volumetrically most significant eruptive events associated with the Star Kimberlite occur within the predominantly marine Lower Colorado Group (Joli Fou and Viking Formations). Kimberlite beds, which occur at several horizons within these units, consist of subaerial and marine fall deposits, the latter commonly exhibiting evidence of wave-reworking. Black shale-encased resedimented kimberlite beds, likely deposited as subaqueous debris flows and turbidites, are particularly common in the Lower Colorado Group. During its multi-eruptive history, the Star Kimberlite body is interpreted to have evolved from a feeder vent and overlying positive-relief tephra ring, into a tephra cone. Initial early Joli Fou volcanism resulted in formation of a feeder vent (200 m diameter) and tephra ring. Subsequent eruptions, dominated by subaerial deposits, partly infilled the crater and constructed a tephra cone. A late Joli Fou eruption formed a small (70 m diameter) feeder pipe slightly offset to the NW of the early Joli Fou feeder vent. Deposits from this event further infilled the crater, and were deposited on top of early Joli Fou kimberlite (proximal to the vent) and sediments of the Joli Fou Formation (distal to the vent). The shape of the tephra cone was modified during multiple marine transgression and regression cycles coeval with deposition of the Lower Colorado Group, resulting in wave-reworked kimberlite sand along the fringes of the cone and kimberlitic event deposits (tempestites, turbidites, debris flows) in more distal settings.     

Punctuated,long-lived emplacement history of the Renard 2 kimberlite,Canada, revealed by new high precision U-Pb groundmass perovskite dating

Kimberlites are rare volatile-rich ultramafic magmas thought to erupt in short periods of time (<1 Myr) but there is a growing body of evidence that the emplacement history of a kimberlite can be significantly more protracted. In this study we report a detailed geochronology investigation of a single kimberlite pipe from the Renard cluster in north-central Québec. Ten new high precision ID-TIMS (isotope dilution – thermal ionization mass spectrometry) U-Pb groundmass perovskite dates from the main pipe-infilling kimberlites and several small hypabyssal kimberlites from the Renard 2 pipe indicate kimberlite magmatism lasted at least ~20 Myr. Two samples of the main pipe-infilling kimberlites yield identical weighted mean ²⁰⁶Pb/²³⁸U perovskite dates with a composite date of 643.8 ± 1.0 Myr, interpreted to be the best estimate for main pipe emplacement. In contrast, six hypabyssal kimberlite samples yielded a range of weighted mean ²⁰⁶Pb/²³⁸U perovskite dates between ~652-632 Myr. Multiple dates determined from these early-, syn- and late-stage small hypabyssal kimberlites in the Renard 2 pipe demonstrate this rock type (commonly used to date kimberlites) help to constrain the duration of kimberlite intrusion history within a pipe but do not necessarily reliably record the emplacement age of the main diatreme in the Renard cluster. Our results provide the first robust geochronological data on a single kimberlite that confirms the field relationships initially observed by Wagner (1914) and Clement (1982); the presence of antecedent (diatreme precursor) intrusions, contemporaneous (syn-diatreme) intrusions, and consequent (post-diatreme) cross-cutting intrusions. The results of this detailed U-Pb geochronology study indicate a single kimberlite pipe can record millions of years of magmatism, much longer than previously thought from the classical viewpoint of a rapid and short-duration emplacement history.

     

Depositional processes in a kimberlite crater: the Upper Cretaceous Orapa South Pipe (Botswana)

The Orapa A/K1 Diamond Mine, Botswana, exposes the crater facies of a bilobate kimberlite pipe of Upper Cretaceous age. The South Crater consists of layered volcaniclastic deposits which unconformably cross‐cut massive volcaniclastic kimberlite of diatreme facies in the North Pipe. Based on the depositional structure, grain‐size, sorting and composition of kimberlite in the South Crater, six units are distinguished in the ～70 m thick stratiform crater‐fill sequence and talus slope deposits close to the crater wall, which represents a multistage infill of the volcanic crater. Monolithic basalt breccias (Unit 1) near the base of the crater‐fill are interpreted as rock‐fall avalanche deposits, generated by the sector collapse of the crater walls. These deposits are overlain by a basal imbricated lithic breccia and upper massive sub‐unit (Unit 2), interpreted as the deposits of a pyroclastic flow that entered the South Crater from another source. Vertical degassing structures within the massive sub‐unit show evidence for elutriation of fines and probably were formed after emplacement by fluidization due to air entrainment. Units 3 and 5 are thinly stratified deposits, characterized by diffuse bedding, reverse and normal grading, coarse lenticular beds, mudstone beds, small‐scale scour channels and load casts. These units are attributed to rapidly emplaced sheet floods on the crater floor. Units 3 and 5 are directly overlain by poorly sorted volcaniclastic kimberlite (Units 4 and 6) rich in basalt boulders, attributed to debris flows formed by the collapse of crater walls. Unit 7 comprises medium sandstones to cobble conglomerates representing talus fans, which were active throughout the deposition of Units 1 to 6. The study demonstrates that much of the material infilling the South Crater is derived externally after eruption, including primary pyroclastic flow deposits probably from another kimberlite pipe. These findings have important implications for predicting diamond grade. Results may also aid the interpretation of crater sequences of ultra‐basic, basaltic and intermediate volcanoes, together with the deposits of topographic basins in sub‐aerial settings.     

Petrogenesis of the Late Cretaceous northern Alberta kimberlite province

At present, 48 Late Cretaceous (ca. 70–88 Ma) kimberlitic pipes have been discovered in three separate areas of the northern Alberta: the Mountain Lake cluster, the Buffalo Head Hills field and the Birch Mountains field. The regions can be distinguished from one another by their non-archetypal kimberlite signature (Mountain Lake) or, in the case of kimberlite fields, primitive (Buffalo Head Hills) to evolved (Birch Mountains) magmatic signatures.

The dominant process of magmatic differentiation is crystal fractionation and accumulation of olivine, which acts as the main criteria to distinguish between primitive and evolved Group I-type kimberlite fields in the northern Alberta. This is important from the viewpoint of diamond exploration because the majority (about 80%) of the more primitive Buffalo Head Hills kimberlites are diamondiferous, whereas the more evolved Birch Mountains pipes are barren of diamonds for the most part. Petrographically, the Buffalo Head Hills samples are distinct from the Birch Mountains samples in that they contain less carbonate, have a smaller modal abundance of late-stage minerals such as phlogopite and ilmenite, and have a higher amount of fresh, coarse macrocrystal (>0.5 mm) olivine. Consequently, samples from the Buffalo Head Hills have the highest values of MgO, Cr and Ni, and have chemistries similar to those of primitive hypabyssal kimberlite in the Northwest Territories. Based on whole-rock isotopic data, the Buffalo Head Hills K6 kimberlite has ⁸⁷Sr/⁸⁶Sr and _Nd values similar to those of South African Group I kimberlites, whereas the Birch Mountains Legend and Phoenix kimberlites have similar _Nd values (between 0 and +1.9), but distinctly higher ⁸⁷Sr/⁸⁶Sr values (0.7051–0.7063).

The lack of whole-rock geochemical overlap between kimberlite and the freshest, least contaminated Mountain Lake South pipe rocks reflects significant mineralogical differences and Mountain Lake is similar geochemically to olivine alkali basalt and/or basanite. Intra-field geochemical variations are also evident. The K4 pipe (Buffalo Head Hills), and Xena and Kendu pipes (Birch Mountains) are characterized by anomalous concentrations of incompatible elements relative to other northern Alberta kimberlite pipes, including chondrite-normalized rare-earth element distribution patterns that are less fractionated than the other kimberlite samples from the Buffalo Head Hills and Birch Mountains. The Xena pipe has similar major element chemical signatures and high-Al clinopyroxene similar to, or trending towards, the Mountain Lake pipes. In addition, K4 and Kendu have higher ⁸⁷Sr/⁸⁶Sr and lower _Nd than Bulk Earth and plot in the bottom right quadrant of the Nd–Sr diagram. We suggest, therefore, that the K4 and Kendu pipes contain a contribution from old, LREE-enriched (low Sm/Nd) lithosphere that is absent from the other kimberlites, are affected by crustal contamination, or both.

Based on xenocryst populations, the northern Alberta kimberlite province mantle is dominated by carbonate-saturated lherzolitic mantle. Higher levels of melt depletion characterize the Buffalo Head Hills mantle sample. Despite high diamondiferous to barren pipe ratios in the Buffalo Head Hills pipes, mineral indicators of high diamond potential, such as G10 garnet, diamond inclusion composition chrome spinels and high-sodium eclogitic garnet, are rare.     

Petrogenesis of the crater-facies Tokapal kimberlite pipe,Indravati Basin,Central India

New geochemical data of the crater-facies Tokapal kimberlite system sandwiched between the lower and upper stratigraphic horizons of the Mesoproterozoic lndravati Basin a：：e presented. The kimberlite has been subjected to extensive and pervasive low-temperature alteration. Spinel is the only primary phase identifiable, while olivine macrocrysts and juvenile lapilli are largely pseudomorphed （talc-serpentine- carbonate alteration）. However, with the exception of the alkalies, major element oxides display systematic fractionation trends; likewise, HFSE patterns are well correlated and allow petrogenetic interpretation. Various crustal contamination indices such as （SiO2 ＋ AI：：O3 ~ Na20）]（MgO ~ K20） and Si] Mg are close to those of uncontaminated kimberlites. Similar La]Yb （＇79-109） of the Tokapal samples with those from the kimberlites of Wajrakarur （73-145） and Narayanpet （72-156）, Eastern Dharwar craton, southern India implies a similarity in their genesis. In the discriminant plots involving HFSE the Tokapal samples display strong affinities to Group 1I kimberlites from southern Africa and central India as well as to ＇transitional kimberlites＇ from the Eastern Dharwar craton, southern India, and those from the Prieska and Kuruman provinces of southern Africa. There is a striking ~;imilarity in the depleted-mantle （TOM） Nd model ages of the Tokapal kimberlite system, Bastar craton, th~ kimberlites from NKF and WKE Eastern Dharwar craton, and the Majhgawan diatreme, Bundelkhand craton, with the emplacement age of some of the lamproites from within and around the Palaeo~Mesoproterozoic Cuddapah basin, southern India. These similar ages imply a major tectonomagmatic event, possibly related to the break- up of the supercontinent of Columbia, at 1.3-1.5 Ga across the l：hree cratons. The ＇transitional＇ geochemical features displayed by many of the Mesoproterozoic po~：assic-ultrapotassic rocks, across these Indian cratons are inferred to be memories of the metasomatisi     

Geology of the Renard 65 kimberlite pipe,Québec,Canada

Renard 65, a diamondiferous pipe in the Neoproterozoic Renard kimberlite cluster (Québec, Canada), is a steeply-dipping and downward-tapering diatreme comprised of three pipe-filling units: kimb65a, kimb65b, and kimb65d. The pipe is surrounded by a marginal and variably-brecciated country rock aureole and is crosscut by numerous hypabyssal dykes: kimb65c. Extensive petrographic and mineralogical characterization of over 700 m of drill core from four separate drill holes, suggests that Renard 65 is a Group I kimberlite, mineralogically classified as phlogopite kimberlite and serpentine-phlogopite kimberlite. Kimb65a is a massive volcaniclastic kimberlite dominated by lithic clasts, magmaclasts, and discrete olivine macrocrysts, hosted within a fine-grained diopside and serpentine-rich matrix. Kimb65b is massive, macrocrystic, coherent kimberlite with a groundmass assemblage of phlogopite, spinel, perovskite, apatite, calcite, serpentine and rare monticellite. Kimb65c is a massive, macrocrystic, hypabyssal kimberlite with a groundmass assemblage of phlogopite, serpentine, calcite, perovskite, spinel, and apatite. Kimb65d is massive volcaniclastic kimberlite with localized textures that are intermediate between volcaniclastic and coherent, with tightly packed magmaclasts separated by a diopside- and serpentine-rich matrix. Lithic clasts of granite-gneiss in kimb65a are weakly reacted, with partial melting of feldspars and crystallization of richterite and actinolite. Lithic clasts in kimb65b and kimb65d are entirely recrystallized to calcite + serpentine/chlorite + pectolite and display inner coronas of diopside-aegirine and an outer corona of phlogopite. Compositions are reported for all minerals in the groundmass of coherent kimberlites, magmaclasts, interclast matrices, and reacted lithic clasts. The Renard 65 rocks are texturally classified as Kimberley-type pyroclastic kimberlites and display transitional textures. The kimberlite units are interpreted to have formed in three melt batches based on their distinct spinel chemistry: kimb65a, kimb65b and kimb65d. We note a strong correlation between the modal abundances of lithic clasts and the textures of the kimberlites, where increasing modal abundances of granite/gneiss are observed in kimberlites with increasingly fragmental textures.

     

辽宁瓦房店金刚石矿田金伯利岩侵位机制分析

辽宁省瓦房店金刚石矿田位于华北陆块辽东新元古代- 古生代坳陷带。区内各时代地层均有出露,其中新元古界出露面积最大。区内断裂构造发育,较大的有北北东向的金州断裂,已发现的金伯利岩体基本上分布在该断裂以西。矿田内金刚石矿均为金伯利岩型,已发现100多个金伯利岩体,划分成4条矿带,已提交4个大型原生金刚石矿床和3个近源小型金刚石砂矿床,资源量占全国的一半以上,是我国重要的金刚石矿集区,其中50号金伯利岩管因其出产的金刚石质量优越而在宝石界享有盛誉。但本区的金伯利岩绝大部分是20世纪70年代、80年代发现的,为了更好地开展金刚石勘查工作,对本区金伯利岩的成矿条件和控矿因素进行了研究,金伯利岩体的平面分布位置表明,瓦房店地区的金伯利岩体成群、成带分布,既有岩管也有岩脉,以岩脉为主,岩管约占20%左右,岩体大小不等、形态各异,钻孔控制的岩管、岩脉大多具有向下延伸突然中断的特征,钻孔中见到的金伯利岩显示,很多金伯利岩管底界平直或具有多个水平标高上出现平移错动的现象,典型岩管、岩脉与等轴或近等轴状构造盆地的关系密切。通过对区内金伯利体岩空间分布特征、岩体形态特征进行分析,并探讨了本区金伯利岩的侵位过程和就位机制后认为,瓦房店地区的金伯利岩在侵位的浅成阶段,由于岩浆携带大量挥发分,在上升通道不顺畅的地段使上覆地层隆起,当挥发分泄漏掉以后隆起的地层塌陷形成浅碟子状的构造盆地,挥发分泄漏的通道就是金伯利岩体的产出位置,也有部分岩浆沿次级断裂运移固结成岩;由于被晚期推覆构造改造,使岩管、岩脉出现水平错动,造成了钻孔中所见的平底岩管或岩脉向下延伸不大的现象,这一认识为合理部署勘查工作提供了新的思路。