台湾增生楔天然气水合物的地震特征

通过对南海973航次在该区域的多道地震剖面的分析,结合该区域的地质背景,认为台湾增生楔具有天然气水合物存在和分布的地球物理特征,在地震剖面上出观海底反射层(BSR)、振幅空白(BZ)、极性反转等地震识别标志。BSR所在区域位于南海向菲律宾海板块俯冲的增生楔上,南海新生代沉积不仅提供了富含有机质的丰富物源,而且类似于活动大陆边缘的构造体系又为天然气水合物的形成提供了良好的条件。     

南海北部琼东南海域气烟囱发育特征及其对水合物形成与分布的影响

琼东南海域地震资料解释发现了BSR(似海底反射)、BSR下伏强反射及烟囱体等天然气水合物的地震响应特征。研究发现,区内气烟囱的分布与BSR的分布存在明显的相关性,气烟囱是气体垂直运移的主要通道,气体垂直向上运移至水合物稳定带大量聚集,从而形成水合物。因此,精细刻画研究区气烟囱发育特征对于区内天然气水合物成藏及分布研究具有重要意义。传统气烟囱识别方法只通过地震剖面上的弱反射或相关属性分析,笔者利用基于MLP算法的神经网络,高效地分析了本区域气烟囱的分布,并根据烟囱与BSR分布之间的关系,分析了气烟囱对天然气水合物形成及分布的影响。     

南海东北部陆坡与恒春海脊天然气水合物分布的地震反射特征对比

对“探宝号”调查船2001年8月在南海东北部陆坡及台湾南部恒春海脊海域采集的多道地震剖面资料进行了地震反射波数据分析、解释和研究,并对南海北部陆坡、陆隆及其东侧俯冲带等区域天然气水合物矿藏的成藏规律及分布特征作了初步的分析与探讨,结果表明:(1)南海东北部陆坡和台湾南部恒春海脊海域地震剖面上均显示有BSR,但两区域构造成因、形式和相关地质环境的不同造成了天然气水合物的成因及过程不同。(2)南海东北部陆坡区域的天然气水合物形成与该区广泛发育的断裂带、滑塌构造体及其所形成的压力场屏蔽环境有关,而台湾南部恒春海脊海域天然气水合物的形成则与马尼拉海沟俯冲带相关的逆冲推覆构造、增生楔及其所对应的海底流体疏导体系有关。(3)南海陆缘区域广泛发育有各种断裂带、滑塌构造体、泥底辟、俯冲带、增生楔等,且温压环境合适,是天然气水合物矿藏极有可能广泛分布的区域。     

印度西大陆边缘富含气体沉积物及气体水合物层的检测

在印度西大陆边缘外的高分辨率地震反射和浅层剖面都揭示了在内陆架上有空白反射、反射波终断与渗流相伴生的形式出现的声学屏蔽特征的存在。这些屏蔽现象揭示了富含气体沉积物的存在。在外陆架-中陆坡地区，那些麻坑地形及上覆水体中突出的羽状流都清楚地表明有气体从陆坡沉积物中渗流出来，而正是这种渗流反映了源岩的存在。地震剖面也揭示了中-下陆-陆隆地区存在着似海底反射波（BSR），同时推测认为存在着气体水合物。BSR大约出现在海底之下300-600ms(TWTT)、水深525-2200m的范围内，它们偶然地呈不连续特征。在BSR之上同样也可以见到清楚的反射空白区及声学空白带。相反，杂乱/或散射的双曲线反射波则出现在BSR之下，这可能是富含气体沉积物存在的一种反映。褶皱、底辟构造及断层均存于陆坡-陆隆区，它们可能成为流体及甲烷气体从深部向上运移的通道及圈闭。     

马尼拉俯冲带北段增生楔形态结构及演化过程

为揭示马尼拉增生楔的形态结构并加深对其演化过程的理解,本文对横穿马尼拉俯冲带北段的几条典型地震剖面进行了深度偏移处理,得到叠前深度偏移剖面和深度-速度模型,并对马尼拉增生楔的形态结构及内部特征进行了精细解释,将马尼拉增生楔分为原始沉积段、褶皱变形段、逆冲推覆段和背逆冲段四个部分,分别代表增生楔演化的不同阶段。推断马尼拉增生楔下部存在由早期仰冲的菲律宾海板块的残留块体构成的弧前基盘,弧前基盘是控制马尼拉增生楔形成演化的关键构造。弧前基盘前端是拆离滑脱面突然降阶并在地震剖面上"隐没"的部位;弧前基盘向增生楔底部的不断挤入导致了逆冲脱序断层的渐次发育以及增生楔向弧前基盘之上的不断爬升,导致了增生楔上、下陆坡地貌的分化,并为褶皱变形段和逆冲推覆段的地层形变提供了主要的应力。     

南海北部陆坡某海域浅层气的声学特征及其对水合物勘探的指示意义

海底天然气渗漏是海洋环境中广泛分布的自然现象,在世界各大洋中都有发现。海底渗漏的气体赋存于浅部地层,可以改变近表层沉积物的物理性质,使其在声学剖面上得以反映。通过对南海北部陆坡某海域研究区浅地层剖面和地震数据分析,在浅地层剖面上发现了声空白、声混浊、增强反射层、速度下拉等特征,在地震剖面上则识别出气烟囱或泥底辟、亮点、速度下拉、增强反射层等特征。以似海底反射层（BSR）作为地震剖面上明显的含气层标志,划分了2套含气系统。通过浅地层剖面与地震剖面联合解释认为,BSR之下气烟囱／泥底辟的发育导致了亮点、速度下拉、增强反射层等声学特征的发生,BSR之上水合物层的存在则可能起到封堵天然气而使其发生侧向运移的作用,在气体封堵相对薄弱的位置,天然气向上运移形成声空白、声混浊、增强反射层、速度下拉等特征。以声空白代表的天然气聚集带可能成为块状水合物的发育场所,可能成为较有潜力的勘探目标。     

南海东北部陆坡与恒春海脊天然气水合物分布的地震反射对比

经过对"探宝号"调查船在2001年8月在南海东北部陆坡及台湾南部恒春海脊海域采集的多道地震剖面资料进行的地震反射波数据分析、研究和解释,结果表明:(1)南海东北部陆坡段区域和台湾南部恒春海脊海域地震剖面上均显示有被作为天然气水合物存在标志的BSR,但两区域构造成因、形式和相关地质环境的不同造成了此两处的天然气水合物成因及过程的不同.(2)南海东北部陆坡区域的水合物形成与该区广泛发育的断裂带、滑塌构造体及其所形成的压力场屏蔽环境有关,而台湾南部恒春海脊海域的天然气水合物的形成则与马尼拉海沟俯冲带相关的逆冲推覆构造、增生楔等及其所对应的海底流体疏导体系有关.(3)南海陆缘区域广泛发育有各种断裂带、滑塌构造体、泥底辟、俯冲带、增生楔等,且温压环境合适,是天然气水合物矿藏极有可能广泛分布的区域.     

东海天然气水合物的地震特征

使用中国科学院海洋研究所“科学一号”调查船于2001年以及20世纪80年代在东海地区采集的多道地震资料,以海域天然气水合物研究为目的,对这些资料进行了数据处理并获得了偏移地震剖面。通过对地震剖面的解释,在6条剖面上确定了6段异常反射为BSR,均有振幅强、与海底相位相反的特点。6段BSR基本上都没有出现和沉积地层相交的现象。分析认为,这与东海地区第四纪以来的沉积特征有关,并不能由此否认这些异常反射是BSR。6段BSR出现的水深为750~2 000 m,埋深在0.1~0.5 s(双程时间)之间。随着海底深度的增大,BSR埋深有增大的趋势。计算结果显示,6段BSR所处的温度和压力条件都满足水合物稳定赋存所需要的温度和压力条件。本文的BSR主要与北卡斯凯迪亚盆地以及智利海域水合物的温度、压力条件相似,而与日本南海海槽、美国布莱克海台等海域水合物的温度、压力条件相差比较大。在地震剖面上,6段BSR所处的局部构造位置都和挤压、断层有关,有利于水合物的发育;在空间上,它们主要分布在东海陆坡近槽底的位置以及与陆坡相近的槽底。在南北方向上,除分布在吐噶喇断裂和宫古断裂附近外,还与南奄西、伊平屋和八重山热液活动区相邻。热液活动和水合物虽然没有直接的成因关系,但岩浆活动为水合物气源的形成提供了热源条件,为流体和气体的运移、聚集提供了通道条件,从而有利于水合物的发育与赋存。根据地震剖面反射特征推断,剖面A1A2和A14A23发育BSR的位置应该有气体或者流体从海底流出,可能是海底冷泉发育的位置。剖面A14A23上BSR发育处,振幅比的异常增大和BSR埋深的降低是相关联的。这种关联支持该处发育海底冷泉的推测。     

神狐海域气烟囱构造分布及其对天然气水合物成藏的影响

对神狐海域多道地震数据进行分析发现了很多天然气水合物及游离气的地震响应特征,包括BSR(似海底反射)、BSR下伏强反射以及烟囱体构造等。该区域气烟囱构造的分布与BSR的分布比较一致,气烟囱构造是深部热解气垂直运移的主要通道,深部烃源岩产生的热解气通过气烟囱等垂直裂隙向上运移至水合物稳定带,产生大量聚集,有利于水合物形成。因此,搞清楚研究区的气烟囱构造分布对于该区域天然气水合物成藏及分布研究具有重要意义。传统识别气烟囱的方法只能通过地震剖面上的弱反射柱状构造或相关属性分析,研究利用基于MLP算法的神经网络结合多属性特征,综合高效的分析了该区域气烟囱构造带的分布,并根据该区域地质构造分布与BSR分布特点分析了该区域气烟囱对天然气水合物成藏的影响。     

全球范围内天然气水合物构造背景及其稳定域研究综述

天然气水合物是人类21世纪的重要能源。目前。全球范围内共有80余处获取水合物样品。识别水合物地震标志—似海底反射(BSR)的地区更为广泛。大量的钻孔资料和地震剖面显示：主动大陆边缘的增生楔和被动大陆边缘的断裂褶皱系、泥火山、泥底辟等构造为水合物聚集成藏的有利构造环境。世界范围内不同水合物产区的温压场及稳定域特征。差别较为明显。各水合物产区的构造背景与水合物发育区的温压场环境以及稳定域的展布规律存在明显的相关关系。本文分别讨论了主动大陆边缘的增生楔(以卡斯凯迪亚为例)和被动大陆边缘的泥火山(以Hakon Mosby泥火山为例)的温压场特征、水合物聚集规律和各自的成藏模式。在此基础上。作者还进一步讨论了南海坳隆断裂带与水合物之间的关系。认为坳隆断裂带分别在气源、疏导体系(断层、砂体)和温压场环境等三方面为水合物形成提供了有利条件。     

Microbial Biomass and Organic Nutrients in the Deep-Sea Sediments of the Central Indian Ocean Basin

In order to assess the impact of deep-sea mining on the in situ benthic life, we measured the microbial standing stock and concentration of organic nutrients in the deep-sea sediments of the Central Indian Ocean Basin in the Indian pioneer area. Sediments were collected using box core and grab samples during September 1996. The total bacterial numbers ranged from 10 10 -10 11 cells per g -1 dry weight sediment. There was a marginal decrease in the number of bacteria from surface to 30 cm depth, though the subsurface section registered a higher number than did the surface. The highest numbers were encountered at depths of 4-8 cm. The retrievable number of bacteria were two orders less in comparison with the direct total counts of bacteria. An almost homogeneous distribution of bacteria, total organic carbon, living biomass, and lipids throughout the depth of cores indicates active microbial and benthic processes in the deep sea sediments. On the other hand, a uniform distribution of total counts of bacteria, carbohydrates, and total organic carbon in all the cores indicates their stable nature and suggests that they can serve as useful parameters for long-term monitoring of the area after the benthic disturbance. Further studies on temporal variability in this region would not only verify the observed norms of distribution of these variables but would also help to understand restabilization processes after the simulated benthic disturbance.     

Assessing the Validity of Seismo-Acoustic Predictor Equations for Obtaining Seabed and Sub-Surface Sediment Physical Properties

The interdependence between the seismo-acoustic properties of a marine sediment and its geotechnical/physical parameters has been known for many years, and it has been postulated that this should allow the extraction of geotechnical information from seismic data. Though in the literature many correlations have been published for the surficial layer, there is a lack of information for greater sediment depths. In this article, a desktop study on a synthetic seafloor model illustrates how the application of published near-surface prediction equations to subsurface sediments (up to several tens of meters burial depth) can lead to spurious predictions. To test this further, acoustic and geotechnical properties were measured on a number of sediment core samples, some of which were subjected to loading in acoustically-equipped consolidation cells (oedometers) to simulate greater burial depth conditions. For low effective pressures (representing small burial depths extending to around 10 meters subsurface), the general applicability of established relationships was confirmed: the prediction of porosity, bulk density, and mean grain size from acoustic velocity and impedance appears generally possible for the investigated sedimentary environments. As effective pressure increases through, the observed relationships deviate more and more from the established ones for the near-surface area. For the samples tested in this study, in some instances increasing pressure even resulted in decreasing velocities. There are several possible explanations for this abnormal behavior, including the presence of gas, overconsolidation, or bimodal grain size distribution. The results indicate that an appropriate depth correction must be introduced into the published prediction equations in order to obtain reliable estimates of physical sediment properties for greater subsurface depths.     

A Review of Some Environmental Issues Affecting Marine Mining

This article reviews information recently available from existing marine and coastal mining for responses to environmental issues affecting marine mining at different depths. It is particularly but not exclusively concerned with those issues affecting seabed biodiversity impact and recovery. Much information has been gathered in the past 10 years from shallow mining operations for construction aggregate, diamonds, and gold, from coastal mines discharging tailings to shallow and deep water, and from experimental deep mining tests. The responses to issues identified are summarized in a series of eight tables intended to facilitate site-specific consideration. Since impacts can spread widely in the surface mixing layer SML, and can affect the biologically productive euphotic zone, the main issues considered arise from the depth of mining relative to the SML of the sea. Where mining is below the SML, the issue is whether it is environmentally better to bring the extraction products to the surface vessel for processing (and waste discharge), or to process the extraction products as much as possible on the seabed. Responses to the issues need to be sitespecific, and dependent on adequate preoperational environmental impact and recovery prediction. For deep tailings disposal from a surface vessel, there are four important environmental unknowns: (1) the possible growth of "marine snow" (bacterial flocs) utilizing the enormous quantities of fine tailings particles (hundreds or thousands of metric tons per day) as nuclei for growth, (2) the possibility that local keystone plankton and nekton species may migrate diurnally down to and beyond the depth of deep discharge and hence be subjected to tailings impact at depth, (3) the burrow-up capability of deep benthos and their ability to survive high rates of tailings deposition, and (4) the pattern and rate of dispersion of a tailings density current through the deep water column from discharge point to seabed. Actions to obtain relevant information in general and site-specifically are suggested.     

Increased Particle Fluxes at the INDEX Site Attributable to Simulated Benthic Disturbance

Particle fluxes were measured 7 m above the sea bottom during the predisturbance, disturbance, and postdisturbance periods by using time series sediment traps attached to seven deep-sea moorings deployed in the INDEX experiment site in the Central Indian Basin. The predisturbance particle fluxes varied between 22.3 to 55.1 mg m -2 day -1 . Increased and variable particle fluxes were recorded by the sediment traps during the disturbance period. The increase observed was 0.5 to 4 times more than the background predisturbance fluxes. The increases in particle fluxes (~4 times) recorded by the sediment trap located in the southwestern direction (DMS-1) were the greatest, which could be the result of preferential movement of resuspended particles generated during the deep-sea benthic disturbance along the general current direction prevailing in this area during the experimental period. Also, the traps located closer to the disturbance area recorded greater fluxes than did the traps far away, across the Deep Sea Sediment Resuspension System path. This variability in recorded particle fluxes by the traps around the disturbance area clearly indicates that physical characteristics such as grain size and density of the resuspended particles produced during the disturbance had an important effect on particle movement. The postdisturbance measurements during ~5 days showed a reduction in particle fluxes of ~50%, indicating rapid particle settlement.     

海上大直径钢管桩打桩过程中桩周土强度弱化研究

海上大直径钢管桩打桩过程中,桩周土体受到强烈扰动而发生强度弱化,掌握桩周土体强度弱化规律对于准确预测打桩过程、保证工程安全具有重要意义。为研究土体强度弱化规律,开展了环剪试验模拟打桩对桩周土体的扰动,测试土体强度随剪切速率的变化规律,建立了描述土体强度弱化规律的拟合公式,引入到打桩分析软件中。研究结果表明：土体的强度折减程度不仅与土体本身的性质有关还受到土体的埋深和剪切速率的影响,埋深越深土体强度折减程度越低,剪切速率越高土体强度折减越高,在打桩分析中可采用这里推荐的线性折减方法来模拟不同深度处土体强度的折减规律。     

Geoacoustic Inversion via Genetic Algorithm and Its Application to Manganese Sediment Identification

An acoustic inversion method using a wide-band signal and two near field receivers is proposed and applied to multiple layered seabed models including a manganese sediment. The inversion problem can be formulated into a probabilistic model comprised of signals, a forward model, and additive noise. The forward model simulates wide-band signals, such as chirp signals, and is chosen to be the source-waveletconvolution plane wave modeling method. The wavelet matching technique, using weighted least-squares fitting, estimates the sediment sound-speed and thickness on which determination of the possible numerical ranges for a priori uniform distribution is based. The genetic algorithm is applied to a global optimization problem to find a maximum a posteriori solution for determined a priori search space. Here the object function is defined by an L 2 norm of the difference between measured and modeled signals. Not only the marginal pdf but also its statistics are calculated by numerical evaluation of integrals using the samples selected during importance sampling process of the genetic algorithm.     

Determination of In Situ Sediment Shear Strength from Advanced Piston Corer Pullout Forces

The advanced piston corer (APC) has been used by the Ocean Drilling Program since 1985 for recovering soft sediments from the ocean floor. The pullout force measured on extracting the core barrel from the sediment is shown to correlate with the average shear strength of the sediment core measured in the ship's laboratory. A simple rule of thumb is derived relating the shear strength of the sediment to the pullout force. Multiple APC holes at individual sites allow the consistency of the pullout measurements to be assessed. The effects of different operational procedures during APC coring are also explored. Although generally applicable, the correlation between pullout force and laboratory measurements of shear strength breaks down for some APC holes, possibly because of the disturbance of some sediment types during the APC coring process. A better understanding of the physical process of APC coring, and its effect on the properties of the sediment both inside and immediately outside the core barrel, would indicate what confidence can be put on the measurement of pullout force as a way of evaluating the in situ shear strength of deep sea sediments.     

Interannual Sea Level Variations and Annual Tides in the Northwestern Pacific

Specific properties of the interannual sea level variations and annual tides in the Northwestern Pacific were studied. Several tide stations were monitored. The monthly mean sea level for the year of 1995 was analyzed at each tide station. A seismic event in 1995, some tectonic activity around the subject area, and the Kuroshio (the oceanic western boundary current) may possibly contaminate results which would have occurred from the astronomical annual tide alone.     

Flow Cytometric Analysis of Coastal Lagoon Bacterioplankton and Picophytoplankton: Fixation and Storage Effects

The effect of different fixation and storage protocols on the flow cytometric (FCM) simultaneous analysis of bacterioplankton and phytoplankton in coastal seawater samples (Mediterranean coastal lagoons) was investigated. FCM measurements (cell number, fluorescence and scatter characteristics) were obtained through DAPI staining. Three fixatives [glutaraldehyde (GA), formaldehyde (FA) and paraformaldehyde (PFA)] and two storage (3 months duration) methods (5 °C and −196 °C) were tested. Two dominant populations were detected in studied samples: bacteria and eukaryotic picophytoplankton. Adding fixatives (2% final concentration) appears necessary to obtain FCM exhaustive counts of all the bacteria and phytoplanktonic cells. This was related to the permeation effect of fixatives which allowed a better DAPI staining of the cells. Maximum fluorescence, i.e. optimal staining of the cells was obtained with FA or PFA, and significant lower fluorescences with GA. Fixed samples stored at 5 °C induced rapid cell loss. Only storage in liquid nitrogen of samples fixed with FA or PFA, allows mid-term (≥4 months) preservation of bacteria or picophytoplankton cell numbers, and limited evolution of DAPI-induced fluorescence and scatter characteristics.