载波相位差分接收机自主完好性监测研究

首先提出了浮点变换完全去相关法,该方法能够在单历元动态确定整周模糊度。研究了基于载波相位测量的完好性监测方法。利用最小二乘残差构造统计检验量,对整周模糊度进行检测。分析了定位误差保护限与卫星构型、漏警概率的关系。实测数据表明,整周模糊度在单历元动态求解的成功率为100%,增加1颗卫星将使垂直定位误差保护限减少约0.2 m,统计检验量检测周跳的正确率为100%。     

组合码和相位观测值在线解双差模糊度的算法

如何在线精确地求解整周模糊度,是ＧＰＳ高精度动态相对定位的关键问题。在线解算取决于很多因素：基线长度、数据处理方法、接收机的性能（如双频还是单频）以及抗ＡＳ和ＳＡ的能力等。现代双频ＧＰＳ接收机能获得载波相位和Ｌ１、Ｌ２频道上的精度伪距观测值,组合这４个观测值可进行单历元整周模糊度解算。文中对组合码和相位观测值在线解整周度的算法进行了试验和分析,得出了很有实用意义的结合。     

Geometry-free undifferenced, single and double differenced analysis of single frequency GPS, EGNOS and GIOVE-A/B measurements

This paper demonstrates a geometry-free GNSS measurement analysis approach and presents results of single frequency GPS, EGNOS and GIOVE short and zero baseline measurements. The purpose is to separate the different contributions to the measurement noise of pseudo range code and carrier phase observations at the receiver. The influence of multipath on the different combinations of observations is also determined. Quantitative results are presented for the thermal code and phase measurement noise and for the correlation between the observations. Comparison of the results with theoretical approximations confirms the validity of the used approach. Results from field measurements clearly show less thermal noise on the Galileo E1BC observations than on the GPS L1C/A observations due to the new signal modulation. The feasibility of ambiguity resolution with a geometry-free model is also discussed including the significant impact of multipath thereon.     

长距离GPS/BDS参考站网多频载波相位整周模糊度解算方法

长距离网络RTK是实现GPS/BDS高精度实时定位的主要手段之一,其核心是长距离参考站网GPS/BDS整周模糊度的快速准确确定。本文提出了一种长距离GPS/BDS参考站网载波相位整周模糊度解算方法,首先利用GPS双频观测数据计算和确定宽巷整周模糊度,同时利用BDS的B2、B3频率观测值确定超宽巷整周模糊度。然后建立GPS载波相位整周模糊度和大气延迟误差的参数估计模型,附加双差宽巷整周模糊度的约束,解算双差载波相位整周模糊度,并建立参考站网大气延迟误差的空间相关模型。根据B2、B3频率的超宽巷整周模糊度建立包含大气误差参数的载波相位整周模糊度解算模型,利用大气延迟误差空间相关模型约束BDS双差载波相位整周模糊度的解算。克服了传统的使用无电离层组合值解算整周模糊度的不利影响。采用实测长距离CORS网GPS、BDS多频观测数据进行算法验证,试验结果证明该方法可实现长距离参考站网GPS/BDS载波相位整周模糊度的准确固定。     

用遗传算法搜索GPS单频单历元整周模糊度

介绍了短基线利用单频单历元双差载波相位定位时模糊度固定的基本理论，探讨了利用遗传算法快速搜索GPS单频单历元整周模糊度的一些理论和实现的方法．提出了用改进的正则化方法改善浮动解来提高搜索成功率的新思路。算例分析表明，在一定的条件下．应用遗传算法搜索整周模糊度成功率高、稳键性较好。     

GLONASS ambiguity resolution of mixed receiver types without external calibration

GLONASS processing from mixed receiver types is typically subject to unmodeled inter-frequency phase biases which prevent carrier phase ambiguity parameters from converging to integers. Receiver-dependent values have been proposed to mitigate the contribution of these biases, but are still subject to a number of issues, such as firmware updates. Recent studies have demonstrated that the origin of inter-frequency biases is a misalignment between phase and code observations, and could be calibrated to first order by manufacturers. In this contribution, a calibration-free method for GLONASS ambiguity resolution is presented in which ambiguities naturally converge to integers. A mandatory condition is that two GLONASS satellites with adjacent frequency numbers are observed simultaneously, although this condition can be relaxed once a fixed solution has been obtained. This approach then permits the integration of different receiver types and firmware versions into seamless processing.     

一种改进的宽巷引导整周模糊度固定算法

一般卫星导航接收机的伪距测量误差大于宽巷波长。根据宽巷引导模型,直接使用双差伪距取整固定双差宽巷整周模糊度有很大概率会产生一周固定错误。基于此,提出了一种改进的宽巷引导整周模糊度固定算法,针对宽巷整周模糊度一周固定错误进行探测和修复。利用整周模糊度为整数的特质构造理论探测量,并将该探测量与载噪比所确定的门限相比较,判断是否出现宽巷整周模糊度一周固定错误;利用双差整周模糊度自由度为3的特点,修复错误宽巷整周模糊度。对该算法在高斯噪声条件下的可行性进行了理论分析,结果表明正常载噪比的观测数据均可分辨出一周宽巷整周模糊度的估计错误。同时,分析了考虑多径等误差后该算法所能接受的载波相位最大误差。计算了不同伪距误差下宽巷整周模糊度一周固定错误出现的概率。使用GPS实测短基线数据对算法进行验证,该算法可将基于宽巷引导的整周模糊度固定算法的固定率从原来的只有不到1/3提升至接近100%。     

Performance analysis of integrated GPS/GLONASS carrier phase-based positioning

Due to the different signal frequencies for the GLONASS satellites, the commonly-used double-differencing procedure for carrier phase data processing can not be implemented in its straightforward form, as in the case of GPS. In this paper a novel data processing strategy, involving a three-step procedure, for integrated GPS/GLONASS positioning is proposed. The first is pseudo-range-based positioning, that uses double-differenced (DD) GPS pseudo-range and single-differenced (SD) GLONASS pseudo-range measurements to derive the initial position and receiver clock bias. The second is forming DD measurements (expressed in cycles) in order to estimate the ambiguities, by using the receiver clock bias estimated in the above step. The third is to form DD measurements (expressed in metric units) with the unknown SD integer ambiguity for the GLONASS reference satellite as the only parameter (which is constant before a cycle slip occurs for this satellite). A real-time stochastic model estimated by residual series over previous epochs is proposed for integrated GPS/GLONASS carrier phase and pseudo-range data processing. Other associated issues, such as cycle slip detection, validation criteria and adaptive procedure(s) for ambiguity resolution, is also discussed. The performance of this data processing strategy will be demonstrated through case study examples of rapid static positioning and kinematic positioning. From four experiments carried out to date, the results indicate that rapid static positioning requires 1 minute of single frequency GPS/GLONASS data for 100% positioning success rate. The single epoch positioning solution for kinematic positioning can achieve 94.6% success rate over short baselines (<6 km).     

长距离网络RTK参考站间双差模糊度快速解算算法

提出了一种长距离网络RTK参考站间双差整周模糊度快速解算方法,该方法利用双频载波相位模糊度间的线性关系确定宽巷模糊度,然后选取双频载波相位的备选模糊度组合,通过计算参考站间对流层误差和轨道误差等非色散误差,对双频载波相位整周模糊度进行搜索。实验结果表明,此方法能够快速、可靠地解算长距离参考站间的双差整周模糊度。     

GNSS双频整周关系约束模糊度算法研究

根据GNSS双频载波相位观测值间的特定关系,提出了一种基于双频整周关系约束的模糊度解算方法(FirCAR)。该方法在局部整数范围内可将载波相位的等效波长增长,以利于整周模糊度的快速解算。不同长度的基线数据实验证明了该算法的正确性和有效性,并分析了卫星截止高度角对解算结果的影响。     

网络RTK参考站间模糊度动态解算的卡尔曼滤波算法研究

提出一种适用于参考站网络的站间模糊度解算方法,该方法使用CA码与相位的电离层无关组合解算宽巷模糊度,利用多路径效应的周期性削弱CA码多路径效应。在宽巷模糊度得到固定后,利用卡尔曼滤波对L1模糊度进行估计,并使用模糊度失相关搜索算法,动态地确定模糊度。这种方法已经应用在自主开发的网络RTK软件上,并以四川GPS综合服务网络SIGN(Sichuan Integrated GPS Network)作为试验网络,进行了试验和分析。     

BDS网络RTK中距离参考站整周模糊度单历元解算方法

提出了一种BDS网络RTK中距离(50~100 km)参考站间的双频载波相位整周模糊度单历元解算方法。该方法首先利用B1、B2载波相位整周模糊度间的线性关系选取B1、B2载波相位整周模糊度备选值。利用双频载波相位整周模糊度备选值计算双差电离层延迟误差,根据参考站各卫星电离层延迟误差间的空间关系,使用双差电离层延迟误差构建双差电离层延迟误差的线性计算模型。通过双差电离层延迟误差线性计算模型的建立搜索和确定B1、B2载波相位的整周模糊度。经CORS网实测数据试验算例的验证,该方法只需一个历元的观测数据即可确定参考站间双差B1、B2载波相位整周模糊度,且不受周跳影响。     

Advantage of velocity measurements on instantaneous RTK positioning

Instantaneous real-time kinematic (RTK) techniques are one approach to achieving real-time high-accuracy positioning. The object of this paper is to show the advantage of adding velocity information to instantaneous RTK positioning. In this paper, velocity from Doppler frequency measurements is used to help resolve integer ambiguities in the LAMBDA method. In urban areas, pseudorange measurements can suffer from significant errors due to strong multipath, despite the use of advanced multipath-mitigation techniques. However, Doppler frequency measurements do not deteriorate as much as pseudoranges, because the multipath error on Doppler frequency measurements is only in the range of several centimeters. Our proposed method has been tested by both static and moving users in sub-urban environments. Single-epoch ambiguity fixing performance was improved compared to conventional ambiguity resolution without velocity information.     

An enhanced calibration method of GLONASS inter-channel bias for GNSS RTK

A user of heterogeneous GPS and GLONASS receiver pairs in differential positioning mode will experience ambiguity fixing challenges due to the presence of inter-channel biases. These biases cannot be canceled by differencing GLONASS observations, whether pseudorange or carrier phase. Fortunately, pre-calibration of GLONASS pseudorange and carrier phase observations can make ambiguity fixing for GPS/GLONASS positioning much easier. We propose an effective algorithm that transforms an RTK (real-time kinematic) solution in a mixed receiver baseline from a float to a fixed ambiguity solution. Carrier phase and code inter-channel biases are estimated from a zero baseline. Then, GLONASS both carrier phase and code observations are corrected accordingly. The results show that a mixed baseline can be transformed from a float (~100 %) to a fixed (more than 92 %) solution.     

PERFORMANCE ANALYSIS OF INTEGRATED GPS/GLONASS CARRIER PHASE-BASED POSITIONING

1　ＩｎｔｒｏｄｕｃｔｉｏｎＲｅａｌ＿ｔｉｍｅｋｉｎｅｍａｔｉｃＧＰＳｐｒｅｃｉｓｅｐｏｓｉｔｉｏｎｉｎｇｈａｓｂｅｅｎｐｌａｙｉｎｇａｎｉｎｃｒｅａｓｉｎｇｒｏｌｅｉｎｂｏｔｈｓｕｒｖｅｙｉｎｇａｎｄｎａｖｉｇａｔｉｏｎ ,ａｎｄｈａｓｂｅｃｏｍｅａｎｅｓｓｅｎｔｉａｌｔｏｏｌｆｏｒｐｒｅｃｉｓｅｒｅｌａｔｉｖｅｐｏｓｉｔｉｏｎｉｎｇ .Ｈｏｗｅｖｅｒ,ｒｅｌｉａｂｌｅａｎｄｃｏｒｒｅｃｔａｍｂｉｇｕｉｔｙｒｅｓｏｌｕｔｉｏｎｄｅｐｅｎｄｓｏｎｏｂｓｅｒｖａ ｔｉｏｎｓｕｐｏｎａｌａｒｇｅｎｕｍｂｅ…     

Precise GRACE baseline determination using GPS

Precision relative navigation is an essential aspect of spacecraft formation flying missions, both from an operational and a scientific point of view. When using GPS as a relative distance sensor, dual-frequency receivers are required for high accuracy at large inter-satellite separations. This allows for a correction of the relative ionospheric path delay and enables double difference integer ambiguity resolution. Although kinematic relative positioning techniques demonstrate promising results for hardware-in-the-loop simulations, they were found to lack an adequate robustness in real-world applications. To overcome this limitation, an extended Kalman Filter modeling the relative spacecraft dynamics has been developed. The filter processes single difference GPS pseudorange and carrier phase observations to estimate the relative position and velocity along with empirical accelerations and carrier phase ambiguities. In parallel, double difference carrier phase ambiguities are resolved on both frequencies using the least square ambiguity decorrelation adjustment (LAMBDA) method in order to fully exploit the inherent measurement accuracy. The combination of reduced dynamic filtering with the LAMBDA method results in smooth relative position estimates as well as fast and reliable ambiguity resolution. The proposed method has been validated with data from the gravity recovery and climate experiment (GRACE) mission. For an 11-day data arc, the resulting solution matches the GRACE K-Band Ranging System measurements with an accuracy of 1 mm, whereby 83% of the double difference ambiguities are resolved.     

三步法确定网络RTK基准站双差模糊度

提出了一种新的由宽巷模糊度、窄巷模糊度到原始载波模糊度逐步固定地确定基准站间的双差模糊度的三步法，该方法不需线性化，不需解求方程组，双差观测值之间相互独立，且与基线长度无关，并用实例证明了该方法确定基准站模糊度速度快、可靠性高的特点。     

宽巷组合及轨迹约束下的列车在轨动态单历元定位算法

动态单历元定位的一个关键问题是模糊度的正确解算。通过增加约束条件,可提高单历元解算模糊度的可靠性。当接收机沿线路中线运动时,首先根据接收机的伪距差分位置,计算出其大致里程,进而根据该里程处的线路设计数据构造轨迹约束条件。由于宽巷组合波长较长,其模糊度比较容易确定,通过附加轨迹约束条件的阻尼LAMBDA方法首先固定宽巷模糊度。在宽巷模糊度固定后,再次附加轨迹约束来确定L1、L2模糊度,实验结果表明该算法可获得很高的解算成功率。     

BDS参考站三频整周模糊度单历元确定方法

参考站载波相位整周模糊度的准确确定是实现BDS网络RTK定位的关键。本文研究了BDS参考站三频载波相位整周模糊度单历元确定方法。首先推导了参考站三频载波相位整周模糊度之间的多个整数线性关系,根据双频载波相位整周模糊度的整数线性关系,以及B1载波相位整周模糊度备选值,确定B1/B2和B1/B3载波相位整周模糊度的备选组合。然后利用不受误差影响的三频载波相位整周模糊度间整数线性关系,对整周模糊度备选值进行约束和确定。根据大气误差的空间相关性,采用以卫星高度角和方位角为依据的基准卫星选择方法,降低了对流层延迟误差残差对多频载波相位整周模糊度之间线性关系约束能力的影响。试验结果表明,本文方法能够实现参考站三频载波相位整周模糊度的单历元准确确定,且计算效率高,算法简单。