Pendulum-type laser strainmeter

Constructive disposition principles of the basic optical units of Michelson interferometers are used in making one-coordinate laser strainmeters of unequal-arm type.The fundamental advantages of pendulum-type laser strainmeter more than classical-type laser strainmeter are displayed.     

Crustal strain observation for nine years with a laser strainmeter in Kobe, Japan

We carried out precise crustal strain observation using a laser strainmeter system at the Rokko-Takao station in Kobe, Japan from 1989 to 1997. The long-term strain record is characterized by remarkable annual changes of the order of 2–3×10⁻⁶ and linear strain accumulation of −4.4×10⁻⁷/year (in contraction). The annual strain changes are inversely proportional to temperature changes that precede the strain changes by about 1 month. The apparent annual strain changes were mainly caused by refractive-index changes in the light path due to the ambient temperature changes. After eliminating the annual temperature effect, linear strain accumulation is corrected to be −6.3−6.7×10⁻⁷/year. Residual strains show the oscillating behavior, in which the oscillating cycle seems to become shorter and shorter as time goes by. During the period, a destructive earthquake of M=7.2 occurred near the Kobe City on 17 January 1995. We investigated the oscillating behavior in secular variations of ground-strains by introducing the deterministic approach of earthquake prediction to search for the “critical point” of the occurrence of an earthquake in the extended power law equation. However, we could not obtain a unique solution to determine eight unknown parameters including the “critical point”. This may be mainly due to lack of data for 4 months from August to November in 1994 by the failure of the laser source before the occurrence of earthquake on 17 January 1995. After removing environmental effects and tidal components, we carefully re-examined strain changes in 7 days and 1 day before the occurrence of the earthquake, but we could not detect anomalous strain changes exceeding 1×10⁻⁸ before the earthquake.     

Fluid flow from pore pressure measurements off La Palma, Canary Islands

In situ subseafloor pore pressure results from the western flank of the island of La Palma, Canary Islands, are presented. The data obtained with a Pop Up Pore Pressure Instrument (PUPPI) provide constraints on the fluid circulation and its causes in a very special context: The sediment piles near an intraplate oceanic island built on the continental rise of the Northwest African Margin. The ambient pore pressures estimated from 2 to 4 days long record are negative in almost all cases with values, at depths of a few meters below sea floor, usually on the order of −10 to −70 Pa. Excess pore pressures develop only in the distal most areas. The permeabilities and compressibilities obtained respectively from the decay of the insertion pressures and the amplitude of the tidally induced pore pressure variations range between 2.5×10⁻¹⁸ and 6.6×10⁻¹⁶ m² and, 6.2×10⁻⁹ and 1.5×10⁻⁷ Pa⁻¹. According to these permeabilities fluid flow is estimated to be mostly downward and usually on the range between 0 and −0.3 mm y⁻¹. However, from the excess pore pressure profile a complex pattern of fluid circulation is inferred where horizontal fluid motion cannot be neglected. Horizontal flow is probably controlled by significant contrasts in the permeability of the different layers. The prevailing downward fluid flow is abnormal for a classical passive margin. We thus interpret these results as the superposition to the loss of fluids by sediment compaction (on the continental rise), of a large-scale flow system stimulated by thermal buoyancy (100 km wide) related to the volcanic activity on the island of La Palma.     

Hydrothermal vent waters at 13°N on the East Pacific Rise: isotopic composition and gas concentration

Gas concentrations and isotopic compositions of water have been measured in hydrothermal waters from 13°N on the East Pacific Rise. In the most Mg-depleted samples ( 5 × 10⁻³ moles/kg) the gas concentrations are: 3–4.5 × 10⁻⁵ cm³ STP/kg helium, 0.62–1.24 cm³ STP/kg CH₄, 10.80–16.71 × 10⁻³ moles/kg CO₂. The samples contain large quantities (95–126 cm³/kg) of H₂ and some carbon monoxide (0.26–0.36 cm³/kg) which result from reaction with the titanium sampling bottles. δ¹³C in methane and CO₂ (−16.6 to −19.5 and −4.1 to −5.5 respectively) indicate temperatures between 475 and 550°C, whereas δ¹³C_CO is compatible with formation by reduction of CO₂ on Ti at 350°C close to the sampling temperature.³He/⁴He are very homogeneous at (7.5 ± 0.1)R_A(³He/⁴He = 1.0 × 10⁻⁵) and very similar to already published data as well as CH₄/³He ratios between 1.4 and 2.1 × 10⁶.¹⁸O and D in water show enrichments from 0.39 to 0.69‰ and from 0.62 to 1.49‰ respectively. These values correspond to W/R ratios of 0.4–7. The distinct¹⁸O enrichments indicate that the isotopic composition of the oceans is not completely buffered by the hydrothermal circulations. The³He-enthalpy relationship is discussed in terms of both hydrothermal heat flux and³He mantle flux.     

Climatological and hydrographic influences on nearshore food webs off the southeastern United States: bacterioplankton dynamics

Bacterioplankton productivity, numbers, and cell specific activity were studied in nearshore waters of the southeastern U.S. continental shelf during seasons of maximum freshwater discharge. In April 1984, coastal waters were stratified from normal spring discharge and typical northeastward wind stress. In April 1985, shelf waters were vertically homogeneous due to below normal runoff and southwestward wind stress. In 1984, nearshore bacterial productivity ranged from 7.0 to 14.7 × 10⁶ cells l⁻¹ h⁻¹ and midshelf rates were 40–50% less. In 1985, nearshore productivity ranged from 0.9 to 2.4 × 10⁶ cells 1⁻¹ h⁻¹, and productivity was extremely patchy over the entire shelf. The cell-specific activity (thymidine incorporation per cell) suggests that although productivity was high in 1984, only a fraction of the bacterioplankton was actively growing or incorporating thymidine (0.9–2.9 × 10⁻²¹ mol cell⁻¹ h⁻¹). In 1985, a higher percentage of cells appeared to be active and incorporating thymidine (5–13 × 10⁻²¹mol cell⁻¹h⁻¹) even though productivity was low. Hydrographic conditions along the southeastern coastline may have had a significant impact on the overall community structure and carbon flow through the microbial food web. When coastal waters were stratified in 1984, bacterial biomass was a significant percentage (35–320%) of the phytoplankton biomass. During vertically homogeneous conditions of 1985, bacterial production and biomass were a small percentage (2–13%) of the phytoplankton production and biomass across the shelf. The interannual variation in the microbial food web was attributed to the interannual variability of the southeastern U.S. hydrology due to changes in freshwater discharge and wind direction and intensity. The ecological implications of these results extend to the potential impact of seasonal microbial food webs on nearshore allochothonous and autochothonous organics before removal from the southeastern U.S. coastline.     

Secular variations of carbon and helium isotopes at Izu-Oshima Volcano, Japan

Secular variations in ¹³C/¹²C ratios and chemical compositions of gas samples from October 1986 to July 1992 are reported from a 92–95 °C steam well located about 3 km north of Mt. Mihara, an active volcano on Izu-Oshima Island, Japan. The δ¹³C value steeply increased from −2.97‰ (relative to PDB carbonate) in December 1986 to −1.15‰ in March 1988 and then gradually decreased to −1.75‰ in July 1992. Over the same period, the CO₂ content changed similarly with time, even though the experimental error is relatively large. These variations are consistent with helium isotope changes. Initially rapid and then slow enhancements of ³He/⁴He ratio, δ¹³C value and CO₂ content are invoked by violent eruptions of Izu-Oshima volcano from 15 November to 18 December 1986. After the eruptive activity, depletion of magmatic gas emission and subsequent mixing with crustal fluids in the hydrothermal system may produce the gradual decreases of ³He/⁴He ratio, δ¹³C value and CO₂ content. Taking into account the rates of these decreases, we suggest that helium and carbon isotope ratios will return to the situation of before the magmatic eruption within 15 years.     

Riparian alder fens — source or sink for nutrients and dissolved organic carbon? — 2. Major sources and sinks

Natural riparian forest wetlands are known to be effective in their ability to remove nitrate by denitrification and sediments with attached phosphorus via sedimentation. On the other hand, litter input and decomposition is a process of crucial importance in cycling of nitrogen and phosphorus in a forest ecosystem.In this study we investigated the amount of nitrogen and phosphorus entering the alder fen ecosystem through leaf litter and its decomposition and the removal capacity of nitrogen and phosphorus by measuring denitrification and sedimentation in the alder fen.We found an average input of leaf litter during fall 1998 of 226 g m⁻² yr⁻¹ DW with nutrient concentration of 0.17% P and 1.6% N. This means a yearly input of 0.4 g m⁻² yr⁻¹ P and 3.6 g m⁻² yr⁻¹ N. The decomposition of leaf litter using litter bags with small and large mesh size resulted in bags with macroinvertebrates (large mesh size) and without macroinvertebrates (small mesh size). After 57 days the litter bags with macroinvertebrates had a decomposition rate of 79%.Denitrification was measured in May and June of 1997 using the acetylene inhibition technique on intact soil cores and slurry-experiments. The average annual denitrification rate was 0.2 g m⁻² yr⁻¹ N using data from the core experiments. The denitrification rate was higher after addition of nitrate, indicating that denitrification in the riparian alder fen is mainly controlled by nitrate supply.The sedimentation rate in the investigated alder fen ranged from 0.47 kg m⁻² yr⁻¹ DW to 4.46 kg m⁻² yr⁻¹ DW in 1998 depending on the study site and method we used. Sedimentation rates were lower in newly designed plate traps than in cylinder traps. The alder fen also showed lower rates than the adjacent creek Briese. Average phosphorus removal rate was 0.33 g m⁻² yr⁻¹ P.Input sources for the surface water of the alder fen are sediment mineralization and decomposition of leaf litter; output sources are sedimentation and denitrification. This study showed that a nutrient input of 24.58 kg ha⁻¹ yr⁻¹ N, 8.8 kg ha⁻¹ yr⁻¹ P and 419 kg ha⁻¹ yr⁻¹ DOC into the surface water of the alder fen is possible. Alder fens cannot improve water quality of an adjacent river system. This is only true for a nearly pristine alder fen with the hydrology of 10 months flooded conditions and 2 months non-flooding conditions a year.     

Mercury's magnetic field: a thermoelectric dynamo?

Permanent magnetism and conventional dynamo theory are possible but problematic explanations for the magnitude of the Mercurian magnetic field. A new model is proposed in which thermoelectric currents driven by temperature differences at a bumpy core-mantle boundary are responsible for the (unobserved) toroidal field, and the helicity of convective motions in a thin outer core (thickness 10² km) induces the observed poloidal field from the toroidal field. The observed field of 3 × 10⁻⁷ T can be reproduced provided the electrical conductivity of Mercury's semiconducting mantle approaches 10³ Ω⁻¹ m⁻¹. This model may be testable by future missions to Mercury because it predicts a more complicated field geometry than conventional dynamo theories. However, it is argued that polar wander may cause the core-mantle topography to migrate so that some aspects of the rotational symmetry may be reflected in the observed field.     

The 1975 sub-terminal lavas, mount etna: a case history of the formation of a compound lava field

The 1975 sub-terminal activity was characterised by low effusion rates (0.3–0.5 m³ s⁻¹) and the formation of a compound lava field composed of many thousands of flow units. Several boccas were active simultaneously and effusion rates from individual boccas varied from about 10⁻⁴ to 0.25 m³s⁻¹. The morphology of lava flows was determined by effusion rate (E): aa flows with well-developed channels and levees formed when E > 2 × 10⁻³ m³ s⁻¹, small pahoehoe flows formed when 2 × 10⁻³ m³ s⁻¹ >E > 5 > 10⁻⁴ m³ s⁻¹ and pahoehoe toes formed when E < 5 × 10⁻⁴ m³ s⁻¹. There was very little variation with time in the effusion temperature, composition or phenocryst content of the lava.New boccas were commonly formed at the fronts of mature lava flows which had either ceased to flow or were moving slowly. These secondary boccas developed when fluid lava in the interior of mature aa flows either found a weakness in the flow front or was exposed by avalanching of the moving flow front. The resulting release of fluid lava was accompanied by either partial drainage of the mature flow or by the formation of a lava tube in the parent flow. The temperature of the lava forming the new bocca decreased with increasing distance from the source bocca (0.035°C m⁻¹). It is demonstrated from the rate of temperature decrease and from theoretical considerations that many of the Etna lavas still contained a substantial proportion of uncooled material in their interior as they came to rest. The formation of secondary boccas is postulated to be one reason why direct measurements of effusion rates tend, in general, to overestimate the total effusion rates of sub-terminal Etna lava fields.     

Thermal condition of Surtsey

The island Surtsey was created by a submarine volcanic eruption which started on the 14th of November 1963, 21 km southwest of the Westman Islands. Volcanic activity continued in this area for nearly 4 years. During the summer of 1979 a 181 m deep continuously cored borehole was drilled on the Surtsey island. Several temperature profiles have been measured in the hole since 1979. The results of these temperature measurements are used as the basis for a discussion of the thermal condition of Surtsey. The hypothesis that intrusions rather than pillow lavas are responsible for the excess heat content of Surtsey is favored. It is found that the 13 m thick discontinuous dike complex, observed in the drill core, is sufficient to explain the excess heat content in the vicinity of the borehole and the shape of the temperature profiles recorded. It is demonstrated that the heat transfer in Surtsey has been dominated by hydrothermal convection and that the system is vapor dominated above sea level. It is estimated that the permeability of a 40 m thick section of altered tuff below sea level is 4.1 × 10⁻¹³ m², while the permeability of the unaltered tuff above sea level is estimated as 1.2 × 10⁻¹⁰ m².     

Isotope geochemistry of minerals and fluids from Newberry volcano, Oregon

Isotopic compositions were determined for hydrothermal quartz, calcite, and siderite from core samples of the Newberry 2 drill hole, Oregon. The δ¹⁵O values for these minerals decrease with increasing temperatures. The values indicate that these hydrothermal minerals precipitated in isotopic equilibrium with water currently present in the reservoirs. The δ¹⁸O values of quartz and calcite from the andesite and basalt flows (700–932 m) have isotopic values which require that the equilibrated water δ¹⁸O values increase slightly (− 11.3 to −9.2‰) with increasing measured temperatures (150–265°C). The lithic tuffs and brecciated lava flows (300–700 m) contain widespread siderite. Calculated oxygen isotopic compositions of waters in equilibrium with siderite generally increase with increasing temperatures (76–100°C). The δ¹⁸O values of siderite probably result from precipitation in water produced by mixing various amounts of the deep hydrothermal water (− 10.5 ‰) with meteoric water (− 15.5 ‰) recharged within the caldera. The δ¹³C values of calcite and siderite decrease with increasing temperatures and show that these minerals precipitated in isotopic equilibrium with CO₂ of about −8 ‰.The δ¹⁸O values of weakly altered (<5% alteration of plagioclase) whole-rock samples decrease with increasing temperatures above 100°C, indicating that exchange between water and rock is kinetically controlled. The water/rock mass ratios decrease with decreasing temperatures. The δ¹⁸O values of rocks from the bottom of Newberry 2 show about 40% isotopic exchange with the reservoir water.The calculated δ¹⁸O and δD values of bottom hole water determined from the fluid produced during the 20 hour flow test are −10.2 and −109‰, respectively. The δD value of the hydrothermal water indicates recharge from outside the caldera.     

Community structure and productivity of the Cornwallis Estuary, Minas Basin

Preliminary results of a seasonal study of the pelagic community at a station on the outer edge of the Cornwallis Estuary suggest that the seasonal variation in plankton community respiration (PCR) is related to organic inputs from nearby salt marshes. Annual phytoplankton production is low (<30 g C m⁻² y⁻¹) and exhibits a seasonal cycle very different from PCR. There is no indication that resuspension of benthic diatoms is an important energy input to the pelagic system. PCR, however, is quite high and exhibits a seasonal trend similar to the export of salt marsh detritus. Zooplankton densities (5–200 l⁻¹) and biomass (<0.4 g m⁻³) appear to be much greater than could be supported by phytoplankton alone. The Cornwallis Estuary may be an estuarine system exhibiting a net export of organic matter to nearby offshore waters.     

The global-average production rate ofBe

Precipitation collected in continuously open containers for about a year at seven sites around the United States was analyzed for¹⁰Be,⁹⁰Sr,²¹⁰Pb and²³⁸U. Based on these data and long-term precipitation,⁹⁰Sr and²¹⁰Pb delivery patterns, the stratospheric, tropospheric and recycled¹⁰Be components in the collections were estimated and the global¹⁰Be production rate was assessed. Single station production rate estimates range from 0.52 × 10⁶ atoms cm⁻² yr⁻¹ to 2.64 × 10⁶ atoms cm⁻² yr⁻¹. The mean value is 1.21 × 10⁶ atoms cm⁻² yr⁻¹ with a standard error of 0.26 × 10⁶ atoms cm⁻² yr⁻¹.     

An instrument system for the investigation of particle fluxes

We present the rationale, design, and use of an instrument system to measure the variability of vertical and horizontal particle fluxes. The system features a new sequentially sampling sediment trap which collects and seals 10 separate samples during a single deployment. Horizontal particle fluxes are simultaneously monitored with a beam transmissometer interfaced to a standard Aanderaa current meter. Results from a 10-week deployment of instruments at several depths in a deep fjord estuary indicate that the trapping rate increases from 0.5g m⁻² day⁻¹ at 20 m to 150g m⁻² day⁻¹ at 200 m (5 m above bottom) because of frequent erosion in the deep waters. Periodic flushing of the deep water by intrusions of marine water over the seaward sill markedly enhances erosion and causes an up-estuary particle transport comparable to the vertical particle flux originating at the surface.     

Exploration drilling and reservoir model of the Platanares geothermal system, Honduras, Central America

Results of drilling, logging, and testing of three exploration core holes, combined with results of geologic and hydrogeochemical investigations, have been used to present a reservoir model of the Platanares geothermal system, Honduras. Geothermal fluids circulate at depths ≥ 1.5 km in a region of active tectonism devoid of Quaternary volcanism. Large, artesian water entries of 160 to 165°C geothermal fluid in two core holes at 625 to 644 m and 460 to 635 m depth have maximum flow rates of roughly 355 and 560 l/min, respectively, which are equivalent to power outputs of about 3.1 and 5.1 MW(thermal). Dilute, alkali-chloride reservoir fluids (TDS ≤ 1200 mg/kg) are produced from fractured Miocene andesite and Cretaceous to Eocene redbeds that are hydrothermally altered. Fracture permeabillity in producing horizons is locally greater than 1500 and bulk porosity is ≤ 6%. A simple, fracture-dominated, volume-impedance model assuming turbulent flow indicates that the calculated reservoir storage capacity of each flowing hole is approximately 9.7 × 10⁶ l/(kg cm⁻²), Tritium data indicate a mean residence time of 450 yr for water in the reservoir. Multiplying the natural fluid discharge rate by the mean residence time gives an estimated water volume of the Platanares system of ≥ 0.78 km³. Downward continuation of a 139°C/km “conductive” gradient at a depth of 400 m in a third core hole implies that the depth to a 225°C source reservoir (predicted from chemical geothermometers) is at least 1.5 km. Uranium-thorium disequilibrium ages on calcite veins at the surface and in the core holes indicate that the present Platanares hydrothermal system has been active for the last 0.25 m.y.     

Polyfluorinated compounds in waste water treatment plant effluents and surface waters along the River Elbe, Germany

Polyfluorinated compounds (PFCs) were investigated in waste water treatment plant (WWTP) effluents and surface waters of the River Elbe from samples collected in 2007. Concentrations of various PFCs, including C₄–C₈ perfluorinated sulfonates (PFSAs), C₆ and C₈ perfluorinated sulfinates, 6:2 fluorotelomer sulfonate, C₅–C₁₃ perfluorinated carboxylic acids (PFCAs), C₄ and C₈ perfluoroalkyl sulfonamides and 6:2, 8:2 and 10:2 unsaturated fluorotelomercarboxylic acids were quantified. ∑PFC concentrations of the river water ranged from 7.6 to 26.4 ng L⁻¹, whereas ∑PFC concentrations of WWTP effluents were approximately 5–10 times higher (30.5–266.3 ng L⁻¹), indicating that WWTPs are potential sources of PFCs in the marine environment. PFC patterns of different WWTP effluents varied depending on the origin of the waste water, whereas the profile of PFC composition in the river water was relatively constant. In both kinds of water samples, perfluorooctanoic acid (PFOA) was the major PFC, whereas perfluorobutane sulfonate (PFBS) was the predominant PFSA.     

Deposition, mineralization, and storage of carbon and nitrogen in sediments of the far northern and northern Great Barrier Reef shelf

The flow of carbon and nitrogen in sediments of the far northern and northern sections of the Great Barrier Reef continental shelf was examined. Most of the organic carbon (81–94%) and total nitrogen (74–92%) depositing to the seabed was mineralized, with burial of carbon (6–19%) and nitrogen (8–20%) being proportionally less on this tropical shelf compared with other non-deltaic shelves. Differences in carbon and nitrogen mineralization among stations related best to water depth and proximity to river basins, with rates of mineralization based on net ∑CO₂ production ranging from 17 to 39 ( mean=23) mmol C m⁻² d⁻¹. The overall ratio of O₂:CO₂ flux was 1.3, close to the Redfield ratio, implying that most organic matter mineralized was algal. Sulfate reduction was estimated to account for ≈30% (range: 6–62%), and denitrification for ≈5% (range: 2–13%), of total C mineralization; there was no measurable CH₄ production. Discrepancies between ∑CO₂ production across the sediment–water interface and sediment incubations suggest that as much as 5 mmol m⁻² d⁻¹ (≈25% of ∑CO₂ flux) was involved in carbonate mineral formation. Most microbial activity was in the upper 20 cm of sediment. Rates of net NH₄⁺ production ranged from 1.6 to 2.7 mmol N m⁻² d⁻¹, with highly variable N₂ fixation rates contributing little to total N input. Ammonification and nitrification rates were sufficient to support rapid rates of denitrification (range: 0.1–12.4 mmol N m⁻² d⁻¹). On average, nearly 50% of total N input to the shelf sediment was denitrified. The average rates of sedimentation, mineralization, and burial of C and N were greater in the northern section of the shelf than in the far northern section, presumably due to higher rainfall and river discharge, as plankton production was similar between regions. The relative proportion of plankton primary production remineralized at the seafloor was in the range of 30–50% which is at the high end of the range found on other shelves. The highly reactive nature of these sediments is attributed to the deposition of high-quality organic material as well as to the shallowness of the shelf, warm temperatures year-round, and a variety of physical disturbances (cyclones, trawling) fostering physicochemical conditions favorable for maintaining rapid rates of microbial metabolism. The rapid and highly efficient recycling of nutrients on the inner and middle shelf may help to explain why the coral reefs on the outer shelf have remained unscathed from increased sediment delivery since European settlement.     

Sources of chloride in hydrothermal fluids from the Valles caldera, New Mexico: a Cl study

The Valles caldera in New Mexico hosts a high-temperature geothermal system, which is manifested in a number of hot springs discharging in and around the caldera. In order to determine the fluid pathways and the origin of chloride in this system, we measured ³⁶Cl/Cl ratios in waters from high-temperature drill holes and from surface springs in this region. The waters fall into two general categories: recent meteoric water samples with low Cl⁻ concentrations (< 10 mg/L) and relatively high ³⁶Cl/Cl ratios [(300–1000) × 10⁻¹⁵]; and geothermal brines with high Cl⁻ concentrations (800–9400 mg/L) but low ³⁶Cl/Cl ratios [(11–26) × 10⁻¹⁵]. The ³⁶Cl/Cl ratios for meteoric waters are slightly higher than expected for this region, suggesting a small addition of anthropogenic ³⁶Cl. Because of low ³⁶Cl/Cl ratios and high Cl⁻ concentrations in the brines, chloride in these waters must be derived from subsurface sources. A comparison between the observed ³⁶Cl/Cl ratios in the brines and those calculated for potential source formations in this region indicates that the present host formations, mainly volcanic tuffs, cannot be major sources of chloride, and that formations at greater depth, such as the Paleozoic and Precambrian formations are more likely to be sources of chloride in the brines. The results suggest that brines are meteoric waters which penetrated into the basement where they derive chloride from leaching of basement rocks and/or from saline pore fluids trapped there, along with likely addition of chloride from Paleozoic strata. Although these fluids have since come to reside in the intracaldera volcanic sequence after convective upwelling, they do not derive much Cl⁻ from the volcanic strata; and residence times of fluids in the volcanics are < 100,000 years.     

Mercury contamination history of an estuarine floodplain reconstructed from a Pb-dated sediment core (Berg River, South Africa)

Mercury deposition histories have been scarcely documented in the southern hemisphere. A sediment core was collected from the ecologically important estuarine floodplain of the Berg River (South Africa). We establish the concentration of Hg in this ²¹⁰Pb-dated sediment core at <50 ng g⁻¹ Hg_T throughout the core, but with 1.3 ng g⁻¹ methylmercury in surface sediments. The ²¹⁰Pb dating of the core provides a first record of mercury deposition to the site and reveals the onset of enhanced mercury deposition in 1970. The ratio of methylmercury to total mercury is relatively high in these sediments when compared to other wetlands.     

Helium accumulation in groundwater, III. Limits on helium transfer across the mantle-crust boundary beneath Australia and the magnitude of mantle degassing

The groundwaters of the Great Artesian Basin (Australia) have been previously shown to be accumulating in-situ production helium for groundwaters ages < 50 kyr and an external helium flux equivalent to whole crustal production for groundwater ages > 100 kyr [1,2]. New helium isotope measurements show that the observed in-situ production helium (³He/⁴He 1.6 × 10⁻⁸) is isotopically distinct from the crustal degassing helium flux (³He/⁴He 6.6 × 10⁻⁸). Furthermore, the crustal degassing helium isotope ratio is marginally in excess of the whole crustal production ratio (³He/⁴He= 3.5 × 10⁻⁸) and the production ratio in a variety of continental rock types. This suggests that the upper limit on volatile transport across the mantle-crust boundary beneath the (relatively) stable and “complacent” Australian continent can be characterized by a “conductive-diffusive” helium/heat flux ratio of 2.6 × 10⁶⁴He atoms mW⁻¹ s⁻¹ which is two orders of magnitude less than the “intrusive-volcanic” ratio of 2.9 × 10⁸⁴He atoms mW⁻¹ s⁻¹ measured at the Galapagos [16]. These results constrain the transcrustal mantle degassing fluxes of⁴He and⁴⁰Ar to be much less than the mid-ocean ridge degassing fluxes; which are much less than the degassing of⁴He and⁴⁰Ar from continental crust. Thus, the degassing of the Earth's interior is dominated by magmatic processes but the dominant fluxes of⁴He and⁴⁰Ar to the atmosphere must come from the continental crust.