Friedrichbeckeite, K (□0.5Na0.5)2 (Mg0.8Mn0.1Fe0.1)2 (Be0.6 Mg0.4)3 [Si12O30], a new milarite-type mineral from the Bellerberg volcano, Eifel area, Germany

Friedrichbeckeite is a new milarite-type mineral. It was found in a single silicate-rich xenolith from a quarry at the Bellerberg volcano near Ettringen, eastern Eifel volcanic area, Germany. It forms thin tabular crystals flattened on {0001}, with a maximum diameter of 0.6 mm and a maximum thickness of 0.1 mm. It is associated with quartz, tridymite, augite, sanidine, magnesiohornblende, enstatite, pyrope, fluorapatite, hematite, braunite and roedderite. Friedrichbeckeite is light yellow, with white to light cream streak and vitreous lustre. It is brittle with irregular fracture and no cleavage, Mohs hardness of 6, calculated density is 2.686 gcm^?3. Optically, it is uniaxial positive with n_ω = 1.552(2) and n_ε = 1.561(2) at 589.3 nm and a distinct pleochroism from yellow (//ω) to light blue (//ε). Electron microprobe analyses yielded (wt.%): Na₂O 2.73, K₂O 4.16, BeO 4.67, MgO 11.24, MnO 2.05, FeO 1.76, Al₂O₃ 0.15, SiO₂ 73.51, (Σ CaO, TiO₂ = 0.06) sum 100.33 (BeO determined by LA-ICP-MS). The empirical formula based on Si = 12 is K_0.87 Na_0.86 (Mg_1.57Mn_0.28Fe_0.24)_Σ2.09 (Be_1.83?Mg_1.17)_Σ3.00 [Si₁₂O₃₀], and the simplified formula can be given as K (□_0.5Na_0.5)₂ (Mg_0.8Mn_0.1Fe_0.1)₂ (Be_0.6?Mg_0.4)₃ [Si₁₂O₃₀]. Friedrichbeckeite is hexagonal, space-group P6/mcc, with a = 9.970(1), c = 14.130(3) Å, V = 1216.4(3) ų, and Z = 2. The strongest lines in the X-ray powder diffraction pattern are (d in Å / I _obs / hkl): 3.180 / 100 / 121, 2.885 / 70 / 114, 4.993 / 30 / 110, 4.081 / 30 / 112, 3.690 / 30 / 022. A single-crystal structure refinement (R1 = 3.62 %) confirmed that the structure is isotypic with milarite and related ^[12] C ^[9] B ₂ ^[6] A ₂ ^[4] T2₃ [^[4] T1₁₂O₃₀] compounds. The C-site is dominated by potassium, the B-site is almost half occupied by sodium, and the A-site is dominated by Mg. The site-scattering at the T2-site can be refined to a Be/(Be?+?Mg) value close to 0.61; the T1-site is occupied by Si. Micro-Raman spectroscopy reveals an increasing splitting of scattering bands around 550 cm^?1 for friedrichbeckeite. The mineral can be classified as an unbranched ring silicate or as a beryllo-magnesiosilicate. With respect to the end-member formula K (□0.5Na0.5)₂ Mg₂ Be₃ [Si₁₂O₃₀] friedrichbeckeite represents the Mg-dominant analogue of almarudite, milarite or oftedalite. The mineral and its paragenesis were formed during pyrometamorphic modifications of the silicate-rich xenoliths enclosed in Quaternary leucite-tephritic lava of the Bellerberg volcano. Holotype material of friedrichbeckeite has been deposited at the mineral collection of the Naturhistorisches Museum Wien, Austria. The mineral is named friedrichbeckeite in honour of the Austrian mineralogist and petrographer Friedrich Johann Karl Becke (1855–1931).     

Sodium trisilicate: A new high-pressure silicate structure (Na2Si[Si2O7])

Crystals of sodium trisilicate (Na₂Si₃O₇) have been grown in the presence of melt at 9 GPa, 1200 °C using the MA6/8 superpress at Edmonton, and the X-ray structure determined at room pressure (R=2.0%). Na₂Si₃O₇ is monoclinic with a=8.922(2) Å, b= 4.8490(5) Å, c=11.567(1) Å, β=102.64(1)° (C2/c), D _x = 3.295 g·cm^-3. Silicon occurs in both tetrahedral and octahedral coordination (^[6]Si∶^[4]Si = l∶2). The SiO₄ tetrahedra form a diorthosilicate [Si₂O₇] group and are linked by the isolated SiO₆ octahedra via shared corners into a framework of 6-membered (^[4]Si-^[4]Si-^[6]Si^[4]Si-^[4] Si-^[6]Si) and 4-membered (^[4]Si-^[6]Si-^[4]Sr-^[6]Si) rings: 〈^[6]Si-O〉=1.789 Å, 〈^[4]Si-O〉= 1.625 Å, ^[4]Si-O-^[4]Si=132.9° and the bridging oxygen is overbonded (s = 2.22). Channels parallel to b-axis and [110] accommodate Na in irregular 6-fold coordination: 〈Na-O〉 = 2.511 Å.     

X-ray single-crystal and Raman study of (Na<Subscript>0.86</Subscript>Mg<Subscript>0.14</Subscript>)(Mg<Subscript>0.57</Subscript>Ti<Subscript>0.43</Subscript>)Si<Subscript>2</Subscript>O<Subscript>6</Subscript>, a new pyroxene synthesized at 7 GPa and 1700 °C

A new pyroxene with formula (Na_0.86Mg_0.14)(Mg_0.57Ti_0.43)Si₂O₆, synthesized in a high-pressure toroidal ‘anvil-with-hole’ apparatus at P = 7 GPa and T = 1700 °C, was characterized by X-ray single-crystal diffraction and Raman spectroscopy. The compound was found to be monoclinic (R1 = 2.56 %), space group C2/c, with lattice parameters a = 9.687(2), b = 8.814(1), c = 5.290(1) Å, β = 107.853(2)°, V = 430.08(1) ų. The coexistence of Mg and Ti⁴⁺ at the M1 site does not induce strong modifications either to the M1 site or to the adjacent M2 site. The Raman spectrum of synthetic Na–Ti-pyroxene was obtained for the first time and compared with that of Mg₂Si₂O₆ (with very low concentrations of Na and Ti). The structural characterization of the Na–Ti–Mg-pyroxene is important, because the study of its thermodynamic constants provides new constraints on thermobarometry of the upper mantle assemblages.     

Crystal chemistry, surface morphology and X-ray photoelectron spectroscopy of Fe-rich osumilite from Mt. Arci, Sardinia (Italy)

Microprobe analysis, single crystal X-ray diffraction, X-ray photoelectron spectroscopy, atomic force microscopy, and X-ray absorption spectroscopy were applied on Fe-rich osumilite from the volcanic massif of Mt. Arci, Sardinia, Italy. Osumilite belongs to the space group P6/mcc with unit cell parameters a = 10.1550(6), c = 14.306(1) Å and chemical formula (K_0.729)_C (Na_0.029)_B (Si_10.498 Al_1.502)_T1 (Al_2.706 Fe _0.294 ²⁺ )_T2 (Mg_0.735 Mn_0.091 Fe _1.184 ²⁺ )_AO₃₀. Structure refinement converged at R = 0.0201. Unit cell parameter a is related to octahedral edge length as well as to Fe²⁺ content, unlike the c parameter which does not seem to be affected by chemical composition. The determination of the amount of each element on the mineral surface, obtained through X-ray photoelectron spectroscopy high-resolution spectra in the region of the Si_2p, Al_2p, Mg_1s and Fe_2p core levels, suggests that Fe presents Fe²⁺ oxidation state and octahedral coordination. Two peaks at 103.1 and 100.6 eV can be related to Si⁴⁺ and Si¹⁺ components, respectively, both in tetrahedral coordination. The binding energy of Al_2p, at 74.5 eV, indicates that Al is mostly present in the distorted T2 site, whereas the Mg peak at 1,305.2 eV suggests that this cation is located at the octahedral site. X-ray absorption at the Fe L_2,3-edges confirms that iron is present in the mineral structure, prevalently in the divalent state and at the A octahedral site.     

A high pressure-high temperature study of TiO2 solubility in Mg-rich phlogopite: implications to phlogopite chemistry

The solubility of Tio₂ in phlogopites has been experimentally determined in the system K₂Mg₆Al₂Si₆O₂₀(OH)₄-K₂Mg₄TiAl₂Si₆O₂₀(OH)₄-K₂Mg₅TiAl₄Si₄O₂₀(OH)₄ between 825–1300°C and 10–30 kbar under vapour absent conditions. Starting compositions lie along the join K₂Mg₆Al₂Si₆O₂₀(OH)₄-K₂Mg_4.5TiAl₃Si₅O₂₀(OH)₄ which represents a combination of the Mg^[VI]2Si^[IV] = Ti^[VI]2Al^[VI] and $\text{2Mg}{}^{\mathrm{[VI]}}\text{=}\text{Ti}{}^{\mathrm{[VI]}}\text{□}{}^{\mathrm{[VI]}}$ substitution mechanisms for Ti in phlogopites. The results of the experiments indicate a systematic increase in solubility of Ti with increasing temperature and decreasing pressure for given bulk Tio₂ content. Under isobaric conditions high temperature Ti-saturated phlogopite breaks down to Ti-deficient phlogopite + rutile + vapour. Mass balance calculations suggest that the vapour phase may contain K₂O dissolved in H₂O and that the reaction is controlled by the vapour phase. Analyses of phlogopites coexisting with rutile and vapour can be represented in terms of the end-member components phlogopite [K₂Mg₆Al₂Si₆O₂₀(OH)₄], eastonite [K₂Mg₅Al₄Si₅O₂₀(OH)₄], an octahedral site deficient Ti-phlogopite (Ti-OSD) of composition K₂(Mg₄Ti□)Al₂Si₆)O₂₀(OH)₄, and Ti-eastonite [K₂Mg₅TiAl₄Si₄O₂₀(OH)₄]. With decreasing amounts of Ti in these phlogopites there is a decrease in the Ti-eastonite component and increase in the eastonite component.The general equation for the breakdown of Ti-phlogopite solid solution to Ti-free phlogopite + rutile + vapour is: 14 Ti-eastonite + 7 Ti-OSD ? 16 eastonite + 3 phlogopite + 21 rutile + 4 H₂O + 2 K₂O. Lack of knowledge of H₂O and K₂O activities in the vapour phase does not permit evaluation of thermodynamic constants for this reaction. The Ti solubility in phlogopites and hence its potential as a geothermobarometer under lower crustal to upper mantle conditions is likely controlled by common mantle minerals such as forsterite.     

Fe-rich Li-bearing magnesionigerite-6N6S from Xianghualing tin-polymetallic orefield, Hunan Province, P.R. China

The Fe-rich Li-bearing magnesionigerite-6N6S occurs in the Xianghualing tin-polymetallic ore field, Linwu County, Hunan Province, Peoples Republic of China. It was found near the outer contact zone of the Laizhiling granite body and in the Middle-Upper Devonian carbonate rocks of Qiziqiao Formation. The mineral formed during the skarn stage. Its empirical formula is Sn_1.81Li_0.67(Fe_1.43Zn_1.19 Mn_0.41)_Σ3.03(Al_14.89Mg_1.46 Ti_0.11Si_0.01)_Σ16.47O₃₀(OH)₂. The structure for magnesionigerite-6N6S was solved and refined in space group R-3?m, with a?=?5.7144(8), c?=?55.446(11) Å, V?=?1568.0(4) ų, to R1?=?0.0528. Based on the structural refinement of single crystal diffraction data the formula of magnesionigerite-6N6S is Sn_1.80Li_0.97(Fe_1.89Zn_0.91) _Σ2.80 (Al_14.60Mg_1.63 Ti_0.20)_Σ16.43O₃₀(OH)₂ with Z?=?3. Fe-rich Li-bearing magnesionigerite-6N6S contains 0.74 wt.% Li₂O. The idealized charge-balanced composition of magnesionigerite-6N6S may be expressed by bivalent and trivalent cations: (Mg²⁺)₄(Al³⁺)₁₈O₃₀(OH)₂. The simplified general formula for the 6N6S polysomes in the nigerite and högbomite groups can be given as A _x B_18-x O₃₀(OH)₂, x?=?~4, where A?=?Mg²⁺, Fe²⁺, Zn²⁺; B?=?Al³⁺, Sn⁴⁺, Ti⁴⁺, Li⁺, □.     

The crystal and melt structure of spinel and alumina at high temperature: An in-situ XANES study at the Al and Mg K-edge

We present structural information obtained on spinel and alumina at high temperature (298-2400 K) using in-situ XANES at the Mg and Al K-edges. For spinel, ^[4](Al_x,Mg_1−x)^[6](Al_2−x,Mg_x)O_4, with increasing temperature, a substitution of Mg by Al and Al by Mg in their respective sites is observed. This substitution corresponds to an inversion of the Mg and Al sites. There is a significant change in the Al K-edge spectra between crystal and liquid, which can be attributed to a change of the ^[6]Al normally observed in corundum at room temperature, to a mixture of ^[6]Al-^[4]Al in the liquid state. This conclusion is in good agreement with previous ²⁷Al NMR experiments. Furthermore, both experiments at the Al and Mg K-edges are in good agreement with XANES calculation made using FDMNES code.     

Synthesis and stability of micas in the system K2O-MgO-SiO2-H2O and their relations to phlogopite

A series of alumina-free micas was synthesized hydrothermally in the potassium-poor portion of the system K₂O-MgO-SiO₂-H₂O. One end member of this series has the composition KMg_2.5[Si₄O₁₀](OH)₂, which, because of its octahedral occupancy, is intermediate between the dioctahedral and trioctahedral micas.From this end member a series of mica solid solutions extends towards more Mg-rich compositions. Single phase micas were obtained along the substitution line 2Mg for Si which appears to involve incorporation of part of the Mg in tetrahedral sites. It leads to a theoretical end member with a structural formula KMg₃[Si_3.5Mg_0.5O₁₀](OH)₂. Solid solutions containing up to 75 mole % of this theoretical end member could be synthesized. The observed densities, water contents, and a one-dimensional Fourier synthesis are consistent with the assumed substitution.At 1 kb fluid pressure and 620° C the Si-rich end member KMg_2.5[Si₄O₁₀](OH)₂ decomposes to a more Mg-rich mica, the roedderite phase K₂Mg₅Si₁₂O₃₀, liquid, and H₂O-rich vapor. With increasing Mg-content the thermal stability of the mica solid solutions increases up to 860°C at a composition of about K₂O·6.2MgO·7.4SiO₂·2H₂O, i.e. KMg_2.8[Si_3.7Mg_0.3O₁₀](OH)₂. This mica disintegrates directly into forsterite + liquid + H₂O-rich vapor. The mica phase richest in Mg with a composition of about K₂O·6.5MgO·7.25SiO₂·2H₂O, i.e. KMg_2.875 [Si_3.625Mg_0.375O₁₀](OH)₂, breaks down at 765° C into forsterite, a more Si-rich mica, liquid, and H₂O-rich vapor.This binary series of alumina-free micas forms a complete series of ternary solid solutions with normal phlogopite, KMg₃[Si₃AlO₁₀](OH)₂. Analyses of some natural phlogopites showing Si in excess of 3.0 (up to 3.18) per formula unit can be explained through this ternary miscibility range.     

Structure-composition relations and Raman spectroscopy of high-pressure sodium silicates

?-Na₂Si₂O₅, ζ-Na₂Si₂O₅, Na₂Si[Si₂O₇], and Na₆Si₃[Si₉O₂₇] have been synthesized using an MA6/8 superpress. Densification in high-pressure sodium silicates is effected largely by changes in packing. In the relaxed (1 bar) structures, cation polyhedra and thermal/displacement parameters are similar to those of low-pressure silicates, but the extra-framework cation positions are oversized. The two mixed ^[4]Si and ^[6]Si framework silicates of known structure (Na₂Si[Si₂O₇] and Na₆Si₃[Si₉O₂₇]) belong to the limited homologous series Na_2mSi_m[Si_n–mO_2n+m], with m<n. The structure-composition relationships of wadeite-type, A₂Ge₄O₉-type, and Na₆Si₃[Si₉O₂₇] silicates and germanates depend on T-O distance and size of the large extra-framework cation. Characteristic features of the SiO₄ tetrahedral units are present in micro-Raman spectra of mixed ^[4]Si and ^[6]Si framework silicates, but bands uniquely attributable to SiO₆ octahedra are weak or obscured. However, ^[6]Si has a profound indirect influence on the Raman spectra, resulting in intense and complex low-frequency bands, assigned to symmetric bending modes with coupled displacements at both bridging oxygens and nonbridging oxygens bonded to ^[6]Si, and a shift to higher frequency and reduction in intensity of the high-frequency bands assigned to symmetric ^[4]Si-O_nbr stretching vibrations. Raman spectroscopy does not appear to be a useful structural probe for small amounts of ^[6]Si in silicate glasses and melts.     

Ionic conductivity in sodium magnesium silicates

Na₂MgSiO₄ crystals prepared hydrothermally at 700° C and 3,000 atm are related to carnegieite with SG Pmn2₁, a=7.015(2), b=10.968(2), and c=5.260(1). Na conductivity in Na₂MgSiO₄ is 3.0×10^?5 (ohm-cm)^?1 at 300° C but can be raised to 1.1×10^?3 (ohm-cm)^?1 by creating Na vacancies in the composition Na_1.9Mg_0.9Al_0.1O₄. Na₄Mg₂Si₃O₁₀ is also a cristobalite-related carnegieite with the orthorhombic cell a=10.584(7), b=14.328(7), and c=5.233(5). The Na conductivity of Na₄Mg₂Si₃O₁₀ is 4.8×10^?3 (ohm-cm)^?1 at 300° C.     

First terrestrial occurrence of roedderite in volcanic ejecta of the Eifel,Germany

Idiomorphic crystals of roedderite occur in melt-coated cavities of xenoliths of contact-altered quartz-sillimanite and quartz-feldspar gneisses which were ejected with the tephritic lava of the Bellerberg volcano. Physical and chemical properties of three different sets of crystals agree generally with those of roedderites from meteorites, in which so far the mineral had been found exclusively. In detail, however, there are characteristic chemical differences amongst the Eifel roedderites with one set of crystals matching closely the ideal formula (Na,K)₂Mg₅ Si₁₂O₃₀, a second set containing excess alkalies according to the substitution Na⁺0.5 Mg²⁺, and a third set richer in iron having an alkali deficiency following Fe³⁺Fe²⁺+Na⁺.The terrestrial roedderites are considered to be precipitates from highly alkaline, MgSi-rich, but Aldeficient gas phases that evolved through contact heating of the gneisses by the tephrite magma.     

Chromium solubility in anhydrous Phase B

The crystal structure and chemical composition of a crystal of (Mg_14?x Cr _x )(Si_5?x Cr _x )O₂₄ (x ≈ 0.30) anhydrous Phase B (Anh-B) synthesized in the model system MgCr₂O₄–Mg₂SiO₄ at 12 GPa and 1600 °C have been investigated. The compound was found to be orthorhombic, space group Pmcb, with lattice parameters a = 5.900(1), b = 14.218(2), c = 10.029(2) Å, V = 841.3(2) Å³ and Z = 2. The structure was refined to R ₁ = 0.065 using 1492 independent reflections. Chromium was found to substitute for both Mg at the M3 site (with a mean bond distance of 2.145 Å) and Si at the octahedral Si1 site (mean bond distance: 1.856 Å), according to the reaction Mg²⁺ + Si⁴⁺ = 2Cr³⁺. Such substitutions cause a reduction in the volume of the M3 site and an increase in the volume of the Si-dominant octahedron with respect to the values typically observed for pure Anh-B and Fe²⁺-bearing Anh-B. Taking into account that Cr³⁺ is not expected to be Jahn–Teller active, it appears that both the Cr³⁺–for–Mg and Cr³⁺–for–Si substitutions in the Anh-B structure decrease the distortion of the octahedra. Electron microprobe analysis gave the Mg_13.66(8)Si_4.70(6)Cr_0.62(4)O₂₄ stoichiometry for the studied phase. The successful synthesis of this phase provides new information for the possible mineral assemblages occurring in the Earth’s deep upper mantle and shed new light on the so-called X discontinuity that has been observed at 275–345 km depth in several subcontinental and subduction zone environments.     

Structural and compositional characterization of synthetic (Ca,Sr)-tremolite and (Ca,Sr)-diopside solid solutions

Tremolite (Ca_xSr_1–x)₂Mg₅[Si₈O₂₂/(OH)₂] and diopside (Ca_xSr_1–x)Mg[Si₂O₆] solid solutions have been synthesized hydrothermally in equilibrium with a 1 molar (Ca,Sr)Cl₂ aqueous solution at 750°C and 200 MPa. The solid run products have been investigated by optical, electron scanning and high resolution transmission electron microscopy, electron microprobe, X-ray-powder diffraction and Fourier-transform infrared spectroscopy. The synthesized (Ca,Sr)-tremolites are up to 2000 µm long and 30 µm wide, the (Ca,Sr)-diopsides are up to 150 µm long and 20 µm wide. In most runs the tremolites and diopsides are well ordered and chain multiplicity faults are rare. Nearly pure Sr-tremolite (tr_0.02Sr-tr_0.98) and Sr-diopside (di_0.01Sr-di_0.99) have been synthesized. A continuous solid solution series, i.e. complete substitution of Sr²⁺ for Ca²⁺ on M₄-sites exists for (Ca,Sr)-tremolite. Total substitution of Sr²⁺ for Ca²⁺ on M₂-sites can be assumed for (Ca,Sr)-diopsides. For (Ca,Sr)-tremolites the lattice parameters a, b and β are linear functions of composition and increase with Sr-content whereas c is constant. For the diopside series all 4 lattice parameters are a linear function of composition; a, b, c increase and β decreases with rising Sr-content. The unit cell volume for tremolite increases 3.47% from 906.68 ų for tremolite to 938.21 ų for Sr-tremolite. For diopside the unit cell volume increases 4.87 % from 439.91 ų for diopside to 461.30 ų for Sr-diopside. The observed splitting of the OH stretching band in tremolite is caused by different configurations of the next nearest neighbors (multi mode behavior). Resolved single bands can be attributed to the following configurations on the M₄-sites: SrSr, SrCa, CaCa and CaMg. The peak positions of these 4 absorption bands are a linear function of composition. They are shifted to lower wavenumbers with increasing Sr-content. No absorption band due to the SrMg configuration on the M₄-site is observed. This indicates a very low or negligible cummingtonite component in Sr-rich tremolites, which is also supported by electron microprobe analysis.     

Phase F,a new hydrous magnesium silicate synthesized at 1000 °C and 17 GPa: Crystal structure and estimated bulk modulus

The structure of phase F, a non-stoichiometric hydrous silicate synthesized in a uniaxial, split-sphere, multi-anvil apparatus at conditions of 17 GPa and 1000° C, has been solved and refined in space group P6₃cm, using synchrotron X-ray data for a single crystal of a size 18 × 24 × 30 μm. The composition and unit cell for phase F are Mg_3.35Si_5.51H_7.26O₁₈, a=5.073(3) Å, c=14.013(9) Å, 7= 312.3(5) ų. The structure contains layers with many similarities to superhydrous phase B. The layers of oxygen atoms are stacked in the ABCBAC-type double cubic closest packing arrangement. The bulk modulus of phase F was estimated from the structural and compositional relationship to superhydrous phase B and periclase.     

Cation distribution in amphiboles synthesized along the Ga analogue of the tremolite–aluminotschermakite join

 Amphiboles were synthesized from bulk compositions prepared along the join Ca_1.8Mg_5.2Si₈O₂₂(OH)₂–Ca_1.8Mg₃Ga₄Si₆O₂₂(OH)₂ hydrothermally at 750–850 °C and 1.0–1.8 GPa, and along the join Ca₂Mg₅Si₈O₂₂F₂–Ca₂Mg₃Ga₄Si₆O₂₂F₂, anhydrously at 1000 °C and 0.7 GPa to document how closely the tschermak-type substitution is obeyed in these analogues of aluminous amphiboles. Electron-microprobe analyses and Rietveld X-ray diffraction structure refinements were performed to determine cation site occupancies. The extent of Ga substitution was found to be limited in both joins, but with the fluorine series having about twice the Ga content (0.6 atoms per formula unit, apfu) of the hydroxyl-series amphiboles (0.3 apfu). The tschermak-type substitution was followed very closely in the hydroxyl series with essentially equal partitioning of Ga between tetrahedral and octahedral sites. The fluorine-series amphiboles deviated significantly from the tschermak-type substitution and, instead, appeared to follow a substitution that is close to a Ca-pargasite substitution of the type: ^[6]Ga³⁺+2^[4]Ga³⁺+1/2^[A] Ca²⁺ = ^[6]Mg²⁺+2^[4]Si⁴⁺+1/2^[A]□. Infrared spectroscopy revealed an inverse correlation between the intensity of the OH-stretching bands and the Ga content for the hydroxyl- and fluorine-series amphiboles. The direct correlation between the Ga and F content and inverse relationship between the Ga and OH content may be a general phenomenon present in other minerals and suggests, for example, that high F contents in titanite are controlled by the Al content of the host rock and that there may be similar direct Al–F correlations in tschermakitic amphiboles. Evidence for the possibility that Al (Ga) might substitute onto only a subset of the tetrahedral sites in tschermakitic amphiboles was sought but not observed in this study. Received: 5 March 2001 / Accepted: 31 July 2001     

The crystal structure of cualstibite-1M (formerly cyanophyllite), its revised chemical formula and its relation to cualstibite-1T

The crystal structure of the rare secondary mineral cualstibite-1M (formerly cyanophyllite), originally reported to have the chemical formula 10CuO·2Al₂O₃·3Sb₂O₃·25H₂O and orthorhombic symmetry, was solved from single-crystal intensity data (Mo-Kα X-radiation, CCD area detector, 293 K, 2θ_max?=?80) collected on a twinned crystal containing very minor Mg. The mineral is monoclinic, P2₁/c (no. 14), with a?=?9.938(1), b?=?8.890(1), c?=?5.493(1) Å, β?=?102.90(1)°, V?=?473.05(11) ų; R1(F)?=?0.0326. All crystals investigated turned out to be non-merohedric twins. The atomic arrangement has a distinctly layered character. Brucite-like sheets composed of two [4?+?2]-coordinated (Cu,Al,Mg) sites are linked by weak hydrogen-bonding (O···O?~?2.80 Å) to isolated regular Sb(OH)₆ octahedra (<Sb-O>?=?1.975 Å). The layered, pseudotrigonal character explains the perfect cleavage and the proneness to twinning. The Sb site is fully occupied and the two (Cu,Al,Mg) sites have occupancies of Cu_0.79Al_0.17Mg_0.04 and Cu_0.72Al_0.23Mg_0.05. The Cu-richer site shows a slightly stronger Jahn-Teller-distortion. The resulting empirical formula, which necessitates a H₂O-for-OH substitution to obtain charge balance, is (Cu_2.23Al_0.63Mg_0.14)(OH)_5.63(H₂O)_0.37[Sb⁵⁺(OH)₆]. The ideal chemical formula is (Cu,Al)₃(OH)₆[Sb⁵⁺(OH)₆], with Cu:Al = 2:1. The structure is closely related to those of trigonal cualstibite-1T [Cu₂AlSb(OH)₁₂, P-3, with ordered Cu-Al distribution in the brucite sheets], and its Zn analogue zincalstibite-1T [Zn₂AlSb(OH)₁₂]. Cualstibite-1M and cualstibite-1T are polytypes and, together with zincalstibite-1T, zincalstibite-9R and omsite, belong to the cualstibite group within the hydrotalcite supergroup, which comprises all natural members of the large family of layered double hydroxides (LDH).     

Mazzite,a new mineral,the natural counterpart of the synthetic zeolite Ω

Mont Semiol (also called Mont Semiouse), Montbrison, Loire, France, is the only place where the zeolite offrettite is known to occur. Now, a new mineral, Mazzite, has been found in the same locality. It occurs in the form of tiny needles, and its properties closely match those of the synthetic “molecular sieve” Ω. The chemical formula is Na_0.03K_1.91Ca_1.35Mg_1.99[Al_9.77Si_26.54O₇₂]·28.03 H₂O. Lattice dimensions are a=18.392 Å, c=7.646 Å, with P 6₃/mmc as most probable space group; D_calc.=2.108. Offrettite and mazzite occur in association with phillipsite, chabazite, calcite and siderite. The mineral has been so named in honour of Prof. Fiorenzo Mazzi.     

Schorlomite: a discussion of the crystal chemistry, formula, and inter-species boundaries

Examination of schorlomite from ijolite at Magnet Cove (USA) and silicocarbonatite at Afrikanda (Russia), using electron-microprobe and hydrogen analyses, X-ray diffraction and Mössbauer spectroscopy, shows the complexity of substitution mechanisms operating in Ti-rich garnets. These substitutions involve incorporation of Na in the eightfold-coordinated X site, Fe²⁺ and Mg in the octahedrally coordinated Y site, and Fe³⁺, Al and Fe²⁺ in the tetrahedrally coordinated Z site. Substitutions Ti⁴⁺Fe³⁺Fe³⁺_–1Si_–1 and Ti⁴⁺Al³⁺Fe³⁺_–1Si_–1 are of major significance to the crystal chemistry of schorlomite, whereas Fe²⁺ enters the Z site in relatively minor quantities (<3% Fe). There is no evidence (either structural or indirect, such as discrepancies between the measured and calculated Fe²⁺ contents) for the presence of ^[6]Ti³⁺ or ^[4]Ti⁴⁺ in schorlomite. The simplified general formula of schorlomite can be written as Ca₃Ti⁴⁺₂[Si_3-x(Fe³⁺,Al,Fe²⁺)_xO₁₂], keeping in mind that the notion of end-member composition is inapplicable to this mineral. In the published analyses of schorlomite with low to moderate Zr contents, x ranges from 0.6 to 1.0, i.e. Ti⁴⁺ in the Y site is <2 and accompanied by appreciable amounts of lower-charged cations (in particular, Fe³⁺, Fe²⁺ and Mg). For classification purposes, the mole percentage of schorlomite can be determined as the amount of ^[6]Ti⁴⁺, balanced by substitutions in the Z site, relative to the total occupancy in the Y site: (^[6]Ti⁴⁺–^[6]Fe²⁺–^[6]Mg²⁺– ^[8]Na⁺)/2. In addition to the predominant schorlomite component, the crystals examined in this work contain significant (>15 mol.%) proportions of andradite (Ca₃Fe³⁺₂Si₃O₁₂), morimotoite (Ca₃Fe²⁺TiSi₃O₁₂), and Ca₃MgTiSi₃O₁₂. The importance of accurate quantitative determination and assignment of Fe, Ti and other cations to the crystallographic sites for petrogenetic studies is discussed.

Li-bearing, disordered Mg-rich tourmaline from a pegmatite-marble contact in the Austroalpine basement units (Styria, Austria)

Pale-blue to pale-green tourmalines from the contact zone of Permian pegmatites to mica schists and marbles from different localities of the Austroalpine basement units (Rappold Complex) in Styria, Austria, are characterized. All these Mg-rich tourmalines have small but significant Li contents, up to 0.29 wt% Li₂O, and can be characterized as dravite, with FeO contents of ?~?0.9–2.7 wt%. Their chemical composition varies from ^X (Na_0.67Ca_0.19?K_0.02?_0.12) ^Y (Mg_1.26Al_0.97Fe²⁺ _0.36Li_0.19Ti⁴⁺ _0.06Zn_0.01?_0.15) ^Z (Al_5.31?Mg_0.69) (BO₃)₃ Si₆O₁₈ ^V (OH)₃? ^W [F_0.66(OH)_0.34], with a?=?15.9220(3), c?=?7.1732(2) Å to ^X (Na_0.67Ca_0.24?K_0.02?_0.07) ^Y (Mg_1.83Al_0.88Fe²⁺ _0.20Li_0.08Zn_0.01Ti⁴⁺ _0.01?_0.09) ^Z (Al_5.25?Mg_0.75) (BO₃)₃ Si₆O₁₈ ^V (OH)₃? ^W [F_0.87(OH)_0.13], with a?=?15.9354(4), c?=?7.1934(4) Å, and they show a significant Al-Mg disorder between the Y and the Z sites (R1?=?0.013–0.015). There is a positive correlation between the Ca content and?<?Y-O?>?distance for all investigated tourmalines (r?≈?1.00), which may reflect short-range order configurations including Ca and Fe²⁺, Mg, and Li. The tourmalines have X_Mg (X_Mg?=?Mg/Mg?+?Fe_total) values in the range 0.84–0.95. The REE patterns show more or less pronounced negative Eu and positive Yb anomalies. In comparison to tourmalines from highly-evolved pegmatites, the tourmaline samples from the border zone of the pegmatites of the Rappold Complex contain relatively low amounts of total REE (~8–36 ppm) and Th (0.1–1.8 ppm) and have low La_N/Yb_N ratios. There is a positive correlation (r?≈?0.91) between MgO of the tourmalines and the MgO contents of the surrounding mica schists. We conclude that the pegmatites formed by anatectic melting of mica schists and paragneisses in Permian time. The tourmalines crystallized from the pegmatitic melt, influenced by the metacarbonate and metapelitic host rocks.     

Compositional limits and analogs of monoclinic triple-chain silicates

Growing recognition of triple-chain silicates in nature has prompted experimental research into the conditions under which they can form and the extent of solid solution that is feasible for some key chemical substitutions. Experiments were done primarily in the range of 0.1–0.5 GPa and 200–850 °C for durations of 18–1,034 h. A wide range of bulk compositions were explored in this study that can be classified broadly into two groups: those that are Na free and involve various possible chemical substitutions into jimthompsonite (Mg₁₀Si₁₂O₃₂(OH)₄), and those that are Na bearing and involve chemical substitutions into the ideal end-member Na₄Mg₈Si₁₂O₃₂(OH)₄. Numerous attempts to synthesize jimthompsonite or clinojimthompsonite were unsuccessful despite the type of starting material used (reagent oxides, magnesite + SiO₂, talc + enstatite, or anthophyllite). Similarly, the chemical substitutions of F⁻ for OH⁻, Mn²⁺, Ca²⁺, or Fe²⁺ for Mg²⁺, and 2Li⁺ for Mg²⁺ and a vacancy were unsuccessful at nucleating triple-chain silicates. Conversely, nearly pure yields of monoclinic triple-chain silicate could be made at temperatures of 440–630 °C and 0.2 GPa from the composition Na₄Mg₈Si₁₂O₃₂(OH)₄, as found in previous studies, though its composition is most likely depleted in Na as evidenced by electron microprobe and FTIR analysis. Pure yields of triple-chain silicate were also obtained for the F-analog composition Na₄Mg₈Si₁₂O₃₂F₄ at 550–750 °C and 0.2–0.5 GPa if a flux consisting of Na-halide salt and water in a 2:1 ratio by weight was used. In addition, limited chemical substitution could be documented for the substitutions of 2 Na⁺ for Na⁺ + H⁺ and of Mg²⁺ + vacancy for 2Na⁺. For the former, the Na content appears to be limited to 2.5 cations giving the ideal composition of Na_2.5Mg₈Si₁₂O_30.5(OH)_5.5, while for the latter substitution the Na content may go as low as 1.1 cations giving the composition Na_1.1Mg_9.4Si₁₂O_31.9(OH)_4.1 based on a fixed number of Si cations. Further investigation involving Mg for Na cation exchange may provide a pathway for the synthesis of Na-free clinojimthompsonite. Fairly extensive solid solution was also observed for triple-chain silicates made along the compositional join Na₄Mg₈Si₁₂O₃₂(OH)₄–Ca₂Mg₈Si₁₂O₃₂(OH)₄ where the limit of Ca substitution at 450 °C and 0.2 GPa corresponds to Na_0.7Ca_1.8Mg_7.8Si₁₂O_31.9(OH)_4.1 (with the OH content adjusted to achieve charge balance). Aside from the Na content, this composition is similar to that observed as wide-chain lamellae in host actinolite. The relative ease with which Na-rich triple chains can be made experimentally suggests that these phases might exist in nature; this study provides additional insights into the range of compositions and formation conditions at which they might occur.