The Krakatau islands: The geotectonic setting

The Sunda Strait is located in a transitional zone between two different modes of subduction, the Java frontal and Sumatra oblique subductions. Western Java and Sumatra are, however, geologically continuous.The Krakatau complex lies at the intersection of two graben zones and a north-south active, shallow seismic belt, which coincides with a fracture zone along this seismic belt with fissure extrusion of alkali basaltic rocks commencing at Sukadana and continuing southward as far as the Panaitan island through Rajabasa, Sebuku and Krakatau.Paleomagnetic studies suggest that the island of Sumatra has been rotating clockwise relative to Java from at least 2.0 Ma to the present at a rate of 5–10h/Ma, and therefore the opening of the Sunda Strait might have started before 2 Ma (Nishimura et al. 1986).From geomorphological and seismological studies, it is estimated that the western part of Sumatra has been moving northward along the Semangko fault and the southern part of Sunda Strait has been pulled apart.Assuming that the perpendicular component (58 mm/yr; Fitch 1972) of the oblique subduction has not changed, we can estimate that the subduction started at 7–10 Ma. Huchon and LePichon (1984) also estimated that the subduction started at 13 Ma.Recent crustal earthquakes in the Sunda Strait area are clustered into three groups: (1) beneath the Krakatau complex where they are typically of tectonic origin, (2) inside a graben in the western part of the strait, and (3) in a more diffuse zone south of Sumatra. The individual and composite focal mechanisms of the events inside the strait show an extensional regime. A stress tensor, deduced from the individual focal mechanisms of the Krakatau group shows that the tensional axis has a N 130°E orientation (Harjono et al. 1988).These studies confirm that the Sunda Strait is under a tensional tectonic regime as a result of clockwise rotation along the continental margin and northward movement of the Sumatra sliver plate along the Semangko fault zone.     

Three-dimensional P-wave velocity structure beneath the Indonesian region

We present the P-wave seismic tomography image of the mantle to a depth of 1200 km beneath the Indonesian region. The inversion method is applied to a dataset of 118,203 P-wave travel times of local and teleseismic events taken from ISC bulletins. Although the resolution is sufficient for detailed discussion in only a limited part of the study region, the results clarify the general tectonic framework in this region and indicate a possible remnant seismic slab in the lower mantle.

Structures beneath the Philippine Islands and the Molucca Sea region are well resolved and high-velocity zones corresponding to the slabs of the Molucca Sea and Philippine Sea plates are well delineated. Seismic zones beneath the Manila, Negros and Cotabato trenches are characterized by high-velocity anomalies, although shallow structures were not resolved. The Molucca Sea collision zone and volcanic zones of the Sangihe and Philippine arcs are dominated by low-velocity anomalies. The Philippine Sea slab subducts beneath the Philippine Islands at least to a depth of 200 km and may reach depths of 450 km. The southern end of the slab extends at least to about 6°N near southern Mindanao. In the south, the two opposing subducting slabs of the Molucca Sea plate are clearly defined by the two opposing high-velocity zones. The eastward dipping slab can be traced about 400 km beneath the Halmahera arc and may extend as far north as about 5°N. Unfortunately, resolution is not sufficient to reveal detailed structures at the boundary region between the Halmahera and Philippine Sea slabs. The westward dipping slab may subduct to the lower mantle although its extent at depth is not well resolved. This slab trends N-S from about 10°N in the Philippine Islands to northern Sulawesi. A NE-SW-trending high-velocity zone is found in the lower mantle beneath the Molucca Sea region. This high-velocity zone may represent a remnant of the former subduction zone which formed the Sulawesi arc during the Miocene.

The blocks along the Sunda and Banda arcs are less well resolved than those in the Philippine Islands and the Molucca Sea region. Nevertheless, overall structures can be inferred. The bowl-shaped distribution of the seismicity of the Banda arc is clearly defined by a horseshoe-shaped high-velocity zone. The tomographic image shows that the Indian oceanic slab subducts to a depth deeper than 300 km i.e., deeper than its seismicity, beneath Andaman Islands and Sumatra and may be discontinuous in northern Sumatra. Along southern Sumatra, Java and the islands to the east, the slab appears to be continuous and can be traced down to at least a depth of the deepest seismicity, where it appears to penetrate into the lower mantle.     

2004年12月26日苏门答腊-安达曼大地震构造特征及地震海啸灾害

2004年12月26日在印度尼西亚苏门答腊岛西侧海域发生的地震是自1964 年阿拉斯加大地震以来最大的地震,震级达到9级或9级以上。它是由印度洋板块向缅甸微板块底下俯冲过程中的逆断层作用造成的。印度洋板块以每年6~7 cm的速率向北北东方向运动,与南亚板块发生斜向聚敛俯冲,此运动在该地区解耦为印度洋板块沿巽他海沟的正向俯冲及缅甸微板块东侧的右旋走向平移运动。主震破裂模型研究的结果表明,破裂是由南向北传播的,地震破裂带长达1 200余km,宽度约100 km,最大位移约为20 m,地震断层向上穿透海沟底面,估计约有10 m左右的错距。这次大地震的同震效应导致地球自转轴摆动、地球自转加速,日长缩短。据目前统计,地震引发的大海啸造成305 276人死亡,被此次海啸夺走生命的人数超过了有史以来历次大海啸灾难中死亡人数的总和。     

Assessment of flexural analysis applied to the Sumatra-Java subduction zone

Indian Ocean subduction zone is one of the most active plate margins of the globe as evident from its vast record of great magnitude earthquake and tsunami events. We use Bouguer admittance (Morlet isostatic response function) in Sumatra-Java subduction zones comprising both the subduction and over-riding plates to determine the lithospheric mechanical strength variations. We determine effective elastic thickness (T _e ) for five oceanic windows (size 990 × 990 km²) by analyzing the admittance using Bouguer gravity and bathymetry data. The results show bimodal T _e values < 20 km for Sumatra and 20−40 km for Java. The lower bimodal values obtained for Sumatra appears to correlate well with the zones of historical seismicity. This is in sharp contrast with Java subduction zone, which shows higher T _e values (20–40 km) and apparently associated with low magnitude earthquakes. We suggest a strong and wide interseismic coupling for Sumatra between the subducting and over-riding plates, and deeper mantle contributing to low strength, shallow focus — high magnitude seismicity and vice versa for Java, leading to their seismogenic zonation.     

Geochronology of West Indonesia and its implication on plate tectonics

The results of radiometric dating of granitic rocks around Kotanopan near the west coast of Central Sumatra indicate an average age of 45 million years.Granites from the Lassi Mass in the Padang Highlands, Central Sumatra, and the Lampong Mass, South Sumatra, possess radiometric ages of ca. 112 and ca. 88 m.y., respectively. Granites and other rocks from the offshore areas north of Java indicate an average age of 100 m.y.Late Cretaceous granitic rocks are present in the islands of the Sunda Shelf namely Anambas (ca. 86 m.y.), Tembelan (ca. 85 m.y.) and Natuna (ca. 75 m.y.).Late Paleozoic granites possessing ages of ca. 276–298 m.y. are encountered in the basement rocks near Djambi, South Sumatra.The outcome of this radiometric age dating proves to be significant for it permits a fresh analysis of the geological evolution of Indonesia based on the plate-tectonics concept.The Tertiary volcano-plutonic arc exposed along the west coast of Sumatra can be traced to the south coast of Java. The corresponding subduction zone can be found in the islands west of Sumatra and the submarine ridge south of Java.The Late Cretaceous plutonic belt of Sumatra does not continue to Java but passes north of it, running however parallel to the subduction zone of Java. These two zones merge in the Meratus Mountains of Southeast Kalimantan.Sumatra was already a volcano-plutonic arc during Permian time, suggesting that since this Period the margins of at least four lithospheric plates have remained near the side of the active Sumatran arc.The presence of Permian volcanic and granitic rocks in the Malay Peninsula and West Kalimantan, and the results of the radiometric age determination of granitic rocks from the islands situated in the Sunda Shelf area, point to the existence of other Permian and Cretaceous volcano-plutonic arcs east and north of the arcs previously described in Sumatra and Java. Thus a double volcano-plutonic arc with opposing Benioff zones must have existed during Permian and Cretaceous time in this area.The Schwaner Mountains of West Kalimantan are considered to be the place where volcano-plutonic arcs of different ages have merged together. The correlative subduction zones have to be sought in the so-called Danau Formation of West Kalimantan and the northern part of the Kuching zone, the Sibu zone of Serawak situated north of the Schwaner Mountains.The evolution and complex geology of the western part of Indonesia can only be understood by the supposition of the existence of megaplates and sub-plates generated from spreading centers situated in the Indian Ocean and presumably in the area of the South China Sea, respectively.     

Recent plumbing system of the Krakatau volcano revealed by teleseismic earthquake distribution

Spatial and temporal analysis of global seismological data 1964–2005 reveals a distinct teleseismic earthquake activity producing a columnar-like formation in the continental wedge between the Krakatau volcano at the surface and the subducting slab of the Indo-Australian plate. These earthquakes occur continuously in time, are in the body-wave (m _b) magnitude range 4.5–5.3 and in the depth range 1–100 km. The Krakatau earthquake cluster is vertical and elongated in the azimuth N30°E, suggesting existence of a deep-rooted fault zone cutting the Sunda Strait in the SSW-NNE direction. Possible continuation of the fault zone in the SW direction was activated by an intensive 2002/2003 aftershock sequence, elongated in the azimuth of N55°E. Beneath the Krakatau earthquake cluster, an aseismic gap exists in the Wadati-Benioff zone of the subducting plate at the depths 100–120 km. We interpret this aseismic gap as a consequence of partial melting inhibiting stress concentration necessary to generate stronger earthquakes, whereas the numerous earthquakes observed in the overlying lithospheric wedge beneath the volcano probably reflect magma ascent in the recent plumbing system of the Krakatau volcano. Focal depth of the deepest events (~100 km) of the Krakatau cluster constrains the location of the primary magma generation to greater depths. The ascending magmatic fluids stress fault segments within the Sunda Strait fault zone and change their friction parameters inducing the observed tectonic earthquakes beneath Krakatau.     

Slip-partitioning and fore-arc deformation at the Sunda Trench, Indonesia

Oblique subduction at the Sunda Trench has produced transpressive deformation of the plate leading edge. A major feature is the right-lateral Great Sumatran Fault (GSF) which probably absorbs a significant fraction of the trench-parallel shear. The kinematics of Sunda relative to Australia are discussed on the basis of available GPS data, and geologically determined slip rates on the GSF. In spite of the uncertainty on the plate motion, several robust conclusions can be drawn. The predicted obliquity of the convergence increases northward along the Sumatra Trench, up to about 30°. Slip partitioning is nearly complete along the northern segment of the Sumatra Trench, where the GSF probably accommodates most of the trench parallel shear. Along the southern segment, where obliquity is less than about 20°, slip-partitioning is not complete as indicated by oblique thrusting at the subduction. There, only a fraction of the trench parallel motion of Australia relative to SE Asia is accommodated along the GSF. These observations suggest that the leading edge behaves like a plastic wedge, except that slip-partitioning, although incomplete, is observed even at low obliquities.     

Genesis of a new slab tear fault in the Indo-Australian plate,offshore northern Sumatra,Indian ocean

Following the December 2004 and March 2005 major shallow foci inter-plate earthquakes in the north Sumatra region, a slab-tear fault located within the subducting Indian plate ruptured across the West Sunda Trench (WST) within the marginal intra-plate region. Trend, length and movement pattern of this New Tear Fault (NTF) segment is almost identical to another such slab-tear fault mapped previously by Hamilton (1979), located around 160 km south of NTF. Seismic activity along the NTF remained quasi-stable till the end of the year 2011, when an earthquake of magnitude 7.2 occurred on 10.01.2012 just at the tip of NTF, only around ～100 km within the intra-plate domain west of WST. The NTF rupture propagated further towards SSW with the generation of two more large earthquakes on 11.04.2012. The foreshock (10.01.12; M7.2) — mainshock (11.04.12; M 8.6) — aftershock (11.04.12; M 8.2) sequence along with numerous smaller magnitude aftershocks unmistakably define the extension of NTF, a slab-tear fault that results tectonic segmentation of the convergent plate margin. Within the intra-plate domain most earthquakes display consistent left-lateral strike slip mechanism along NNE trending fault plane.     

东南亚新生代两类埃达克岩的分布、成因和含矿性

东南亚的巽他群岛-巴布亚新几内亚是新生代埃达克岩和类埃达克岩发育的地区。这些中酸性岩浆岩广泛见于印度尼西亚几内亚岛、苏拉威西和巴布亚新几内亚, 零星见于苏门答腊、班达岛弧、西爪哇和中加里曼丹等地。本区埃达克岩和类埃达克岩岩石类型分别属于岛弧拉斑钙碱性系列和高钾钙碱性系列, 以重稀土元素Y, Yb含量低(分别为Y ≤19 ×10-6和Yb ≤1.8 ×10-6)和高Sr值(＞355 × 10-6)为特征。微量元素蛛网图上有明显的Ba、K、Sr正异常峰和负的Th、Nb (Ta)异常谷。大离子亲石元素(LILE)和高场强元素(HFSE)相对富集。本区埃达克岩和类埃达克岩的构造位置为新生代缝合线附近的大洋岛弧和陆缘造山带, 可划分为两种成因类型:第一种为岛弧拉斑/钙碱性系列, 其REE配分模式属于大洋岛弧型, 见于现代大洋岛弧, 称为岛弧型(O-型)埃达克岩; 另一种为高钾钙碱性系列, 其REE配分模式属于大陆型, 产于大陆板块边缘造山带, 与弧-陆碰撞和后碰撞构造环境有成因联系, 见于大陆边缘, 称为大陆型(C-型)埃达克岩。 研究结果表明:大陆型(C-型)埃达克岩和类埃达克岩分布区域与世界级斑岩铜-金矿分布相一致, 而大洋岛弧型(O-型)主要与浅成热泉金矿和喷气型有成因联系。      

Assessing the threat to Western Australia from tsunami generated by earthquakes along the Sunda Arc

A suite of tsunami spaced evenly along the subduction zone to the south of Indonesia (the Sunda Arc) were numerically modelled in order to make a preliminary estimate of the level of threat faced by Western Australia from tsunami generated along the Arc. Offshore wave heights from these tsunami were predicted to be significantly higher along the northern part of the west Australian coast than for the rest of the coast south of the town of Exmouth. In particular, the area around Exmouth may face a higher tsunami hazard than other areas of the West Australian coast nearby. Large earthquakes offshore of Java and Sumbawa are likely to be a greater hazard to WA than those offshore of Sumatra. Our numerical models indicate that a magnitude 9 or above earthquake along the eastern part of the Sunda Arc has the potential to significantly impact a large part of the West Australian coastline. The Australian government reserves the right to retain a non-exclusive, royalty free license in and to any copyright.     

Subduction of the Woodlark Basin at New Britain Trench, Solomon Islands region

The Woodlark Basin, located south of the Solomon Islands arc region, is a young (5 Ma) oceanic basin that subducts beneath the New Britain Trench. This region is one of only a few subduction zones in the world where it is possible to study a young plate subduction of several Ma. To obtain the image of the subducting slab at the western side of the Woodlark Basin, a 40-day Ocean Bottom Seismometer (OBS) survey was conducted in 1998 to detect the micro-seismic activity. It was the first time such a survey had been performed in this location and over 600 hypocenters were located. The seismic activity is concentrated at the 10–60 km depth range along the plate boundary. The upper limit just about coincides with the leading edge of the accretionary wedge. The upper limit boundary was identified as the up-dip limit of the seismogenic zone, whereas the down-dip limit of the seismogenic zone was difficult to define. The dip angle of the plate at the high seismicity zone was found to average about 30°. Using the Cascadia subduction zone for comparison, which is a typical example of a young plate subduction, suggests that the subduction of the Woodlark Basin was differentiated by a high dip angle and rather landward location of the seismic front from the trench axis (30 km landward from the trench axis). Furthermore, as pointed out by previous researchers, the convergent margin of the Solomon Islands region is imposed with a high stress state, probably due to the collision of the Ontong Java Plateau and a rather rapid convergence rate (10 cm/year). The results of the high angle plate subduction and inner crust earthquakes beneath the Shortland Basin strongly support the high stress state. The collision of the Ontong Java Plateau, the relatively rapid convergence rate, and moderately cold slab as evidenced by low heat flow, rather than the plate age, may be dominantly responsible for the geometry of the seismogenic zone in the western part of the Woodlark Basin subduction zone.     

Spatial variations in the geochemistry of quaternary lavas across the Sunda arc in Java and Bali

Since Mesozoic time, Java and Bali have formed part of an evolving system of island arcs comprising the Sunda arc of Indonesia. The present tectonic setting is relatively simple with subduction occurring at the Java Trench to the south. A north-dipping Benioff seismic zone delineates an underthrust lithospheric slab to depths of approximately 600 km beneath the Java Sea. Quaternary lavas of the normal island arc association range from tholeiites to high-K calc-alkaline lavas over Benioff zone depths from 120–250 km, respectively. More abundant calc-alkaline lavas lie between these extremes. High-K alkaline lavas are found over Benioff zone depths in excess of 300 km.Both within and between these groups of rocks there are consistent spatial variations in the observed geochemistry. For approximately 200 rocks, incompatible elements such as K, Rb, Cs, Sr, Ba, light REE, U and Th show an increase in abundance of almost an order of magnitude with increasing depth to the seismic zone. Abundances of compatible elements show little consistent variation and trace elements such as Ni, Co, Cr, and Sc are characteristically depleted except in some of the alkaline lavas. Major element abundances in rocks of the normal island arc association show little variation, except for K and P, which both increase in abundance across the arc and Al, which shows a relative decrease.The major and trace element data are inconsistent with the derivation of the analyzed rocks by partial melting of the crustal component of the subducted lithosphere. On the other hand, low Ni abundances (20 ppm) in the basalts suggest that most of the lavas are fractionated and few if any represent primary mantle-derived melts. The spatial variations in the geochemistry of erupted lavas across Java and Bali are best explained by a combination of two processes: melting of a geochemically zoned mantle source and smaller degrees of partial melting of that material at progressively greater depths. Primary tholeiitic magmas could be formed by 20–25% melting at depths of 30–40 km, primary high-K calc-alkaline magmas by 5–15% melting at 40–60 km depth, and primary alkaline magmas by 5% melting at depths of 80–90 km. The geochemical zoning in the mantle, which is also manifested by increasing ⁸⁷Sr/⁸⁶Sr ratios in lavas across the arc, is interpreted to result from the addition of a small melt fraction derived from the crustal component of the subducted lithosphere.     

Submarine landslides at the eastern Sunda margin: observations and tsunami impact assessment

Our analysis of new bathymetric data reveals six submarine landslides at the eastern Sunda margin between central Java and Sumba Island, Indonesia. Their volumes range between 1 km3 in the Java fore-arc basin up to 20 km3 at the trench off Sumba and Sumbawa. We estimate the potential hazard of each event by modeling the corresponding tsunami and its run-up on nearby coasts. Four slides are situated remarkably close to the epicenter of the 1977 tsunamigenic Sumba M _w  = 8.3 earthquake. However, comparison of documented tsunami run-up heights and arrival times with our modeling results neither allows us to confirm nor can we falsify the hypothesis that the earthquake triggered these submarine landslides.     

喜马拉雅西部雅鲁藏布江缝合带地壳尺度的构造叠置

陆陆碰撞过程是板块构造缺失的链条。印度板块与亚洲板块的碰撞造就了喜马拉雅造山带和青藏高原的主体。然而,人们对印度板块在大陆碰撞过程中的行为尚不了解。如大陆碰撞及其碰撞后的大陆俯冲是如何进行的、印度板块是俯冲在青藏高原之下还是回转至板块上部(喜马拉雅造山带内)以及两者比例如何,这些仍是亟待解决的问题。印度板块低角度沿喜马拉雅主逆冲断裂(MHT)俯冲在低喜马拉雅和高喜马拉雅之下已经被反射地震图像很好地揭示。然而,关于MHT如何向北延伸,前人的研究仅获得了分辨率较低的接收函数图像。因而,MHT和雅鲁藏布江缝合带之间印度板块的俯冲行为仍是一个谜。喜马拉雅造山楔增生机制,也就是印度地壳前缘的变形机制,反映出物质被临界锥形逆冲断层作用转移到板块上部,或是以韧性管道流的样式向南溢出。在本次研究中,我们给出在喜马拉雅造山带西部地区横过雅鲁藏布江缝合带的沿东经81.5°展布的高分辨率深地震反射剖面,精细揭示了地壳尺度结构构造。剖面显示,MHT以大约20°的倾斜角度延伸至大约60 km深度,接近埋深为70~75 km的Moho面。越过雅鲁藏布江缝合带运移到北面的印度地壳厚度已经不足15 km。深地震反射剖面还显示中地壳逆冲构造反射发育。我们认为,伴随着印度板块俯冲,地壳尺度的多重构造叠置作用使物质自MHT下部的板块向其上部板块转移,这一过程使印度地壳厚度减薄了,同时加厚了喜马拉雅地壳。     

东南亚巽他群岛埃达克岩的分布及斑岩型铜(金)矿成矿预测的地质准则

东南亚巽他群岛是新生代埃达克岩、类埃达克岩极其发育的地区。这些中酸性岩浆岩广泛见于几内亚岛上的中央山脉、巴布亚新几内亚的欧文-斯坦利推覆带、俾斯麦岛弧、布干维尔岛-所罗门岛弧、印度尼西亚苏拉威西、加里曼丹中部、班达岛弧,零星见于苏门答腊、爪哇等地。根据微量元素特征及REE曲线类型的特点,本区埃达克岩可以明显地划分为2种类型：第一种埃达克岩类型属于拉斑/钙-碱性系列,具有大洋岛弧的REE曲线特征（相当于O型埃达克岩）;第二种埃达克岩属于高钾钙-碱性系列,归于大陆埃达克岩（相当于C型埃达克岩）,形成于弧-陆碰撞带或碰撞后造山带。埃达克岩与浅成热液金属矿床和斑岩矿床的成矿作用有密切的关系,是世界级浅成热液和斑岩铜-金矿的容矿岩石。     

Sequence stratigraphy, structural style, and age of deformation of the Malaita accretionary prism (Solomon arc–Ontong Java Plateau convergent zone)

Possibilities for the fate of oceanic plateaus at subduction zones range from complete subduction of the plateau beneath the arc to complete plateau–arc accretion and resulting collisional orogenesis. Deep penetration, multi-channel seismic reflection (MCS) data from the northern flank of the Solomon Islands reveal the sequence stratigraphy, structural style, and age of deformation of an accretionary prism formed during late Neogene (5–0 Ma) convergence between the 33-km-thick crust of the Ontong Java oceanic plateau and the 15-km-thick Solomon island arc. Correlation of MCS data with the satellite-derived, free-air gravity field defines the tectonic boundaries and internal structure of the 800-km-long, 140-km-wide accretionary prism. We name this prism the “Malaita accretionary prism” or “MAP” after Malaita, the largest and best-studied island exposure of the accretionary prism in the Solomon Islands. MCS data, gravity data, and stratigraphic correlations to islands and ODP sites on the Ontong Java Plateau (OJP) reveal that the offshore MAP is composed of folded and thrust faulted sedimentary rocks and upper crystalline crust offscraped from the Solomon the subducting Ontong Java Plateau (Pacific plate) and transferred to the Solomon arc. With the exception of an upper, sequence of Quaternary? island-derived terrigenous sediments, the deformed stratigraphy of the MAP is identical to that of the incoming Ontong Java Plateau in the North Solomon trench.We divide the MAP into four distinct, folded and thrust fault-bounded structural domains interpreted to have formed by diachronous, southeast-to-northwest, and highly oblique entry of the Ontong Java Plateau into a former trench now marked by the Kia–Kaipito–Korigole (KKK) left-lateral strike-slip fault zone along the suture between the Solomon arc and the MAP. The structural style within each of the four structural domains consists of a parallel series of three to four fault propagation folds formed by the seaward propagation of thrust faults roughly parallel to sub-horizontal layering in the upper crystalline part of the OJP. Thrust fault offsets, spacing between thrusts, and the amplitude of related fault propagation folds progressively decrease to the west in the youngest zone of active MAP accretion (Choiseul structural domain). Surficial faulting and folding in the most recently deformed, northwestern domain show active accretion of greater than 1 km of sedimentary rock and 6 km, or about 20%, of the upper crystalline part of the OJP. The eastern MAP (Malaita and Ulawa domains) underwent an earlier, similar style of partial plateau accretion. A pre-late Pliocene age of accretion (3.4 Ma) is constrained by an onshore and offshore major angular unconformity separating Pliocene reefal limestone and conglomerate from folded and faulted pelagic limestone of Cretaceous to Miocene age. The lower 80% of the Ontong Java Plateau crust beneath the MAP thrust decollement appears unfaulted and unfolded and is continuous with a southwestward-dipping subducted slab of presumably denser plateau material beneath most of the MAP, and is traceable to depths >200 km in the mantle beneath the Solomon Islands.     

Mantle flow-induced crustal thinning in the area between the easternmost part of the Anatolian plate and the Arabian Foreland (E Turkey) deduced from the geological and geophysical data

Eastern Anatolia consisting of an amalgamation of fragments of oceanic and continental lithosphere is a current active intercontinental contractional zone that is still being squeezed and shortened between the Arabian and Eurasian plates. This collisional and contractional zone is being accompanied by the tectonic escape of most of the Anatolian plate to the west by major strike-slip faulting on the right-lateral North Anatolian Transform Fault Zone (NATFZ) and left-lateral East Anatolian Transform Fault Zone (EATFZ) which meet at Karlıova forming an east-pointing cusp. The present-day crust in the area between the easternmost part of the Anatolian plate and the Arabian Foreland gets thinner from north (ca 44 km) to south (ca 36 km) relative to its eastern (EAHP) and western sides (central Anatolian region). This thinner crustal area is characterized by shallow CPD (12–16 km), very low Pn velocities (< 7.8 km/s) and high Sn attenuation which indicate partially molten to eroded mantle lid or occurrence of asthenospheric mantle beneath the crust. Northernmost margin of the Arabian Foreland in the south of the Bitlis–Pötürge metamorphic gap area is represented by moderate CPD (16–18 km) relative to its eastern and western sides, and low Pn velocities (8 km/s). We infer from the geophysical data that the lithospheric mantle gets thinner towards the Bitlis–Pötürge metamorphic gap area in the northern margin of the Arabian Foreland which has been most probably caused by mechanical removal of the lithospheric mantle during mantle invasion to the north following the slab breakoff beneath the Bitlis–Pötürge Suture Zone. Mantle flow-driven rapid extrusion and counterclockwise rotation of the Anatolian plate gave rise to stretching and hence crustal thinning in the area between the easternmost part of the Anatolian plate and the Arabian Foreland which is currently dominated by wrench tectonics.     

NE-SW lineaments on java as observed from erts—1 images

It has been generally accepted that the main trend of late Tertiary and Quaternary tectonics on Java and Sumatra is parallel to the longest axis of the islands.A study of ERTS-1 images covering parts of central and eastern Java, reveals a set of NE—SW trending lineaments, which measure a few 10 km in length. The direction of these lineaments corresponds to the so-called Meratus tectonic trend.Without being directly recognizable as fault or fault-line features these lineaments are also observable on scale 1: 50,000 aerial photographs.Geomorphic features such as unpaired terraces, linear scars, morphological unconformities, different land-use patterns across the lineament, and coastline configurations, however, strongly suggest a fault-origin of these lineaments.     

Effect of time-evolving age and convergence rate of the subducting plate on the Cenozoic adakites and boninites

Partial melting of subducting oceanic crust expressed as high-Mg volcanic rocks such as adakites and boninites has been actively studied for decades, and Lee and King (2010) reported that time-evolving subduction parameters such as the age and the subduction rate of the converging oceanic plate play important roles in transient partial melting of the subducting oceanic crust (e.g., Aleutians). However, few subduction model experiments have considered time-evolving subduction parameters, posing problems for studies of transient partial melting of subducting oceanic crust in many subduction zones. Therefore, we constructed two-dimensional kinematic–dynamic subduction models for the Izu–Bonin, Mariana, Northeast Japan, Kuril, Tonga, Java–Sunda, and Aleutian subduction zones that account for the last 50 Myr of their evolution. The models include the time-evolving age and convergence rate of the incoming oceanic plate, so the effect of time-evolving subduction parameters on transient partial melting of oceanic crust can be evaluated. Our model calculations revealed that adakites and boninites in the Izu–Bonin and Aleutian subduction zones resulted from transient partial melting of oceanic crust. However, the steady-state subduction model using current subduction parameters did not produce any partial melting of oceanic crust in the aforementioned subduction zones, indicating that time-evolving subduction parameters are crucial for modeling transient eruption of adakites and boninites. Our model calculations confirm that other geological processes such as forearc extension, back-arc opening, mantle plumes and ridge subduction are required for partial melting of the oceanic crust in the Mariana, Northeast Japan, Tonga, and southeastern Java–Sunda subduction zones.     

南海南部巽他陆架氧同位素3期粘土矿物记录及其古环境意义

南海南部低海平面时期巽他陆架陆源碎屑的物源区变化,对于研究海陆变迁过程古环境演化具有重要意义.选择巽他陆架外缘对海平面变化影响非常敏感的氧同位素3期岩心记录（18282-2孔）,开展高分辨率陆源碎屑粘土矿物分析,以期获得海平面变化影响下的物源区演化历史.研究结果显示,在氧同位素3期44.5~36.0 cal ka BP期间,巽他陆架外缘含有较高的蒙脱石（29%~44%）与中等含量的高岭石（21%~27%）、伊利石（19%~27%）和绿泥石（14%~20%）.物源区分析表明,这个时期的蒙脱石主要由苏门答腊岛和泰国中部河流提供,高岭石主要由马来半岛、苏门答腊岛和婆罗洲西部河流提供,而伊利石和绿泥石主要由湄公河提供.在此期间,海平面长时间位于-80 m以下,巽他出露陆架上发育的大型古河流（北巽他河、古昭披耶河及古湄公河）可将来自周边物源区的陆源碎屑物质直接输送到陆架外缘.研究岩心的蒙脱石/（伊利石+绿泥石）比值与海平面变化具有良好的对应关系:当海平面下降时,蒙脱石/（伊利石+绿泥石）比值增大;反之亦然.这一现象表明海平面变化是影响巽他陆架外缘氧同位素3期沉积环境演化的最重要因素,即海平面升降引起的海陆格局变化,特别是古岸线的迁移可显著影响古河流与研究站位间的搬运距离,从而导致周边物源区对陆架外缘的陆源碎屑物质相对贡献量发生变化.