Deflection amplification factor for estimating seismic lateral deformations of RC frames

Different values have been assigned to the ratio of the defl ection amplifi cation factor(Cd) to the response modifi cation factor(R) for a specifi ed force-resisting system in the seismic design provisions while the same application is defi ned for it. An analytical study of the seismic responses of several reinforced concrete frames subjected to a suite of earthquake records performed in this research indicate that the stories’ overstrength and stiffness distribution along the structural height can affect local defl ections more than global ones. Therefore, the Cd/R ratio is calculated based on the ratio of both maximum inelastic to maximum elastic displacements and interstory drifts. Due to damage concentration in some specifi c stories, the defl ection amplifi cation factor calculated based on inelastic interstory drifts was larger than that of the inelastic displacements. Consequently, a minimum value of 1.0 is recommended for the Cd/R ratio in order to estimate maximum inelastic drifts. The ratio of inelastic to elastic displacement was generally found to increase slightly along the structural height for the studied RC models. In addition, it was detected that the story damage indices of the studied RC frames decrease when the inverted value of inelastic interstory drift ratios are increased through a(negative) power form.     

Inelastic displacement ratios for evaluation of structures built on soft soil sites

This paper summarizes the results of a comprehensive statistical study aimed at evaluating peak lateral inelastic displacement demands of structures with known lateral strength and stiffness built on soft soil site conditions. For that purpose, empirical information on inelastic displacement ratios which are defined as the ratio of peak lateral inelastic displacement demands to peak elastic displacement demands are investigated. Inelastic displacement ratios were computed from the response of single‐degree‐of‐freedom systems having 6 levels of relative lateral strength when subjected to 118 earthquake ground motions recorded on bay‐mud sites of the San Francisco Bay Area and on soft soil sites located in the former lake‐bed zone of Mexico City. Mean inelastic displacement ratios and their corresponding scatter are presented for both ground motion ensembles. The influence of period of vibration normalized by the predominant period of the ground motion, the level of lateral strength, earthquake magnitude, and distance to the source are evaluated and discussed. In addition, the effects of post‐yield stiffness and of stiffness and strength degradation on inelastic displacement ratios are also investigated. It is concluded that magnitude and distance to the source have negligible effects on constant‐strength inelastic displacement ratios. Results also indicate that weak and stiffness‐degrading structures in the short spectral region could experience inelastic displacement demands larger than those corresponding to non‐degrading structures. Finally, a simplified equation obtained using regression analyses aimed at estimating mean inelastic displacement ratios is proposed for assisting structural engineers in performance‐based assessment of structures built on soft soil sites. Copyright © 2006 John Wiley & Sons, Ltd.     

Residual displacement ratios for assessment of existing structures

Results of an analytical study aimed at evaluating residual displacement ratios, C_r, which allow the estimation of residual displacement demands from maximum elastic displacement demands is presented. Residual displacement ratios were computed using response time‐history analyses of single‐degree‐of‐freedom systems having 6 levels of relative lateral strength when subjected to an ensemble of 240 earthquake ground motions recorded in stations placed on firm sites. The results were statistically organized to evaluate the influence of the following parameters: period of vibration, level of relative lateral strength, site conditions, earthquake magnitude, and distance to the source. In addition, the influence of post‐yield stiffness ratio in bilinear systems and of the unloading stiffness in stiffness‐degrading systems was also investigated. A special emphasis is given to the uncertainty of these ratios. From this study, it is concluded that mean residual displacement ratios are more sensitive to changes in local site conditions, earthquake magnitude, distance to the source range and hysteretic behaviour than mean inelastic displacement ratios. In particular, residual displacement ratios exhibit large levels of record‐to‐record variability and, therefore, this dispersion should be taken into account when estimating residual displacements. A simplified expression is presented to estimate mean residual displacements ratios for elastoplastic systems during the evaluation of existing structures built on firm soil sites. Copyright © 2005 John Wiley & Sons, Ltd.     

Inelastic displacement ratios for evaluation of existing structures

Results of a detailed statistical study of constant relative strength inelastic displacement ratios to estimate maximum lateral inelastic displacement demands on existing structures from maximum lateral elastic displacement demands are presented. These ratios were computed for single‐degree‐of‐freedom systems with different levels of lateral strength normalized to the strength required to remain elastic when subjected to a relatively large ensemble of recorded earthquake ground motions. Three groups of soil conditions with shear wave velocities higher than 180m/s are considered. The influence of period of vibration, level of lateral yielding strength, site conditions, earthquake magnitude, distance to the source, and strain‐hardening ratio are evaluated and discussed. Mean inelastic displacement ratios and those associated with various percentiles are presented. A special emphasis is given to the dispersion of these ratios. It is concluded that distance to the source has a negligible influence on constant relative strength inelastic displacement ratios. However, for periods smaller than 1s earthquake magnitude and soil conditions have a moderate influence on these ratios. Strain hardening decreases maximum inelastic displacement at a fairly constant rate depending on the level of relative strength for periods of vibration longer than about 1.0s while it decreases maximum inelastic displacement non‐linearly as the period of vibration shortens and as the relative‐strength ratio increases for periods of vibration shorter than 1.0s. Finally, results from non‐linear regression analyses are presented that provide a simplified expression to be used to approximate mean inelastic displacement ratios during the evaluation of existing structures built on firm sites. Copyright © 2003 John Wiley & Sons, Ltd.     

Capacity-based inelastic displacement spectra for reinforced concrete bridge columns

Capacity-based inelastic displacement spectra that comprise an inelastic displacement ratio (C_R ) spectrum and the corresponding damage index (DI ) spectrum are proposed in this study to aid seismic design and evaluation of reinforced concrete (RC) bridges. Nonlinear time history analyses of single-degree-of-freedom (SDOF) systems are conducted using a versatile smooth hysteretic model when subjected to far-field and near-fault ground motions. It is demonstrated that the Park and Ang damage index can be a good indicator for assessing the actual visible damage condition of columns regardless of its loading history, providing a better insight into the seismic performance of bridges. The computed spectra for near-fault (NF) ground motions show that as the magnitude of pulse period ranges increases from NF1 (0.5-2.5 seconds) to NF2 (2.5-5.5 seconds), the spectral ordinates of the C_R and DI spectra increase moderately. In contrast, the computed spectra do not show much difference between NF2 and NF3 (5.5-10.5 seconds) when the period of vibration T_n≤  1.5 seconds, after which the spectral ordinates of NF3 tend to increase obviously, whereas those of NF2 decrease with increasing T_n . Moreover, when relative strength ratio R  = 5.0, nearly all of the practical design scenarios could not survive NF3. On the basis of the computed spectra, C_R and DI formulae are presented as a function of T_n , R , and various design parameters for far-field and near-fault ground motions. Finally, an application of the proposed spectra to the performance-based seismic design of RC bridges is presented using DI as the performance objective.     

Generalized force vectors for multi‐mode pushover analysis of torsionally coupled systems

A generalized multi‐mode pushover analysis procedure was developed for estimating the maximum inelastic seismic response of symmetrical plan structures under earthquake ground excitations. Pushover analyses are conducted with story‐specific generalized force vectors in this procedure, with contributions from all effective modes. Generalized pushover analysis procedure is extended to three‐dimensional torsionally coupled systems in the presented study. Generalized force distributions are expressed as the combination of modal forces to simulate the instantaneous force distribution acting on the system when the interstory drift at a story reaches its maximum value during seismic response. Modal contributions to the generalized force vectors are calculated by a modal scaling rule, which is based on the complete quadratic combination. Generalized forces are applied to the mass centers of each story incrementally for producing nonlinear static response. Maximum response quantities are obtained when the individual frames attain their own target interstory drift values in each story. The developed procedure is tested on an eight‐story frame under 15 ground motions, and assessed by comparing the results obtained from nonlinear time history analysis. The method is successful in predicting the torsionally coupled inelastic response of frames responding to large interstory drift demands. Copyright © 2014 John Wiley & Sons, Ltd.     

Residual drift demands in moment‐resisting steel frames subjected to narrow‐band earthquake ground motions

This paper presents the main results of the evaluation of residual inter‐story drift demands in typical moment‐resisting steel buildings designed accordingly to the Mexican design practice when subjected to narrow‐band earthquake ground motions. Analytical 2D‐framed models representative of the study‐case buildings were subjected to a set of 30 narrow‐band earthquake ground motions recorded on stations placed in soft‐soil sites of Mexico City, where most significant structural damage was found in buildings as a consequence of the 1985 Michoacan earthquake, and scaled to reach several levels of intensity to perform incremental dynamic analyses. Thus, results were statistically processed to obtain hazard curves of peak (maximum) and residual drift demands for each frame model. It is shown that the study‐case frames might exhibit maximum residual inter‐story drift demands in excess of 0.5%, which is perceptible for building's occupants and could cause human discomfort, for a mean annual rate of exceedance associated to peak inter‐story drift demands of about 3%, which is the limiting drift to avoid collapse prescribed in the 2004 Mexico City Seismic Design Provisions. The influence of a member's post‐yield stiffness ratio and material overstrength in the evaluation of maximum residual inter‐story drift demands is also discussed. Finally, this study introduces response transformation factors, T_p, that allow establishing residual drift limits compatible with the same mean annual rate of exceedance of peak inter‐story drift limits for future seismic design/evaluation criteria that take into account both drift demands for assessing a building's seismic performance. Copyright © 2013 John Wiley & Sons, Ltd.     

Generalized force vectors for multi‐mode pushover analysis

A generalized pushover analysis (GPA) procedure is developed for estimating the inelastic seismic response of structures under earthquake ground excitations. The procedure comprises applying different generalized force vectors separately to the structure in an incremental form with increasing amplitude until a prescribed seismic demand is attained for each generalized force vector. A generalized force vector is expressed as a combination of modal forces, and simulates the instantaneous force distribution acting on the system when a given response parameter reaches its maximum value during dynamic response to a seismic excitation. While any response parameter can be selected arbitrarily, generalized force vectors in the presented study are derived for maximum interstory drift parameters. The maximum value of any other response parameter is then obtained from the envelope of GPAs results. Each nonlinear static analysis under a generalized force vector activates the entire multi‐degree of freedom effects simultaneously. Accordingly, inelastic actions develop in members with the contribution of all ‘instantaneous modes’ in the nonlinear response range. Target seismic demands for interstory drifts at the selected stories are calculated from the associated drift expressions. The implementation of the proposed GPA is simpler compared with nonlinear response history analysis, whereas it is less demanding in computational effort when compared with several multi‐mode adaptive nonlinear static procedures. Moreover, it does not suffer from the statistical combination of inelastic modal responses obtained separately. The results obtained from building frames have demonstrated that GPA is successful in estimating maximum member deformations and member forces with reference to the response history analysis. When the response is linear elastic, GPA and response spectrum analysis produce identical results. Copyright © 2010 John Wiley & Sons, Ltd.     

Inelastic displacement demands in steel structures and their relationship with earthquake frequency content parameters

This paper deals with the estimation of peak inelastic displacements of SDOF systems, representative of typical steel structures, under constant relative strength scenarios. Mean inelastic deformation demands on bilinear systems (simulating moment resisting frames) are considered as the basis for comparative purposes. Additional SDOF models representing partially‐restrained and concentrically‐braced (CB) frames are introduced and employed to assess the influence of different force‐displacement relationships on peak inelastic displacement ratios. The studies presented in this paper illustrate that the ratio between the overall yield strength and the strength during pinching intervals is the main factor governing the inelastic deformations of partially‐restrained models and leading to significant differences when compared with predictions based on bilinear structures, especially in the short‐period range. It is also shown that the response of CB systems can differ significantly from other pinching models when subjected to low or moderate levels of seismic demand, highlighting the necessity of employing dedicated models for studying the response of CB structures. Particular attention is also given to the influence of a number of scalar parameters that characterise the frequency content of the ground motion on the estimated peak displacement ratios. The relative merits of using the average spectral period T_aver, mean period T_m, predominant period T_g, characteristic period T_c and smoothed spectral predominant period T_o of the earthquake ground motion, are assessed. This paper demonstrates that the predominant period, defined as the period at which the input energy is maximum throughout the period range, is the most suitable frequency content scalar parameter for reducing the variability in displacement estimations. Finally, noniterative equivalent linearisation expressions based on the secant period and equivalent damping ratios are presented and verified for the prediction of peak deformation demands in steel structures. Copyright © 2011 John Wiley & Sons, Ltd.     

Probabilistic estimation of maximum inelastic displacement demands for performance‐based design

A probabilistic approach to estimate maximum inelastic displacement demands of single‐degree‐of‐freedom (SDOF) systems is presented. By making use of the probability of exceedance of maximum inelastic displacement demands for given maximum elastic spectral displacement and the mean annual frequency of exceedance of elastic spectral ordinates, a simplified procedure is proposed to estimate mean annual frequencies of exceedance of maximum inelastic displacement demands. Simplifying assumptions are thoroughly examined and discussed. Using readily available elastic seismic hazard curves the procedure can be used to compute maximum inelastic displacement seismic hazard curves and uniform hazard spectra of maximum inelastic displacement demands. The resulting maximum inelastic displacement demand spectra provide a more rational way of establishing seismic demands for new and existing structures when performance‐based approaches are used. The proposed procedure is illustrated for elastoplastic SDOF systems having known‐lateral strength located in a region of high seismicity in California. Copyright © 2007 John Wiley & Sons, Ltd.     

Site-dependent design spectra and strength modification factors, based on records from Greece

Elastic and inelastic spectra are derived, based on a representative sample of acceleration records from Greece, carefully selected based on magnitude, distance and peak ground acceleration criteria, and grouped into three ground condition categories according to the 2004 Eurocode 8 (EC8) provisions. Using software developed in-house, elastic (pseudoacceleration, pseudovelocity and displacement), as well as inelastic (strength and displacement) spectra are computed for various critical damping ratios and ductility levels. After appropriate scaling, mean spectra are computed both irrespective of, as well as for each different, ground condition, and comparisons with EC8 provisions are made. As a further evaluation of the code spectra, three additional earthquake scenarios are considered representing ground-motion characteristics not reflected in the compiled dataset of records. Subsequently, modification factors for strength (q_μ) are derived from statistical analysis of constant ductility spectra, and corresponding empirical relationships, suitable for design purposes, are proposed.     

A novel non-iterative direct displacement-based seismic design procedure for self-centering buckling-restrained braced frame structures

Self-centering buckling-restrained braces (SCBRBs) were proposed recently to minimize residual deformation of the braces induced by yielding or buckling. Although earthquake resilience of structures equipped with the SCBRBs can be well achieved using displacement based designs (DBDs), previously proposed DBD procedures generally involve iterations. In this study, a novel direct displacement-based design method with a non-iterative procedure, named R–C_R DDBD, is proposed and applied to design of steel braced frame structures with SCBRBs. Unlike previously adopted DBD, the yield displacement does not need to be assumed initially in the proposed procedure. Instead, the yield strength and yield displacement are determined directly by the predetermined objective drift (ratio), using the relation of the strength reduction factor (R) and constant-strength inelastic displacement ratio spectra (C_R spectra), i.e. the R–C_R relation. Since the derived R–C_R relation is independent with the peak ground acceleration of the earthquake records when stiffness and strength degradation are not considered, the proposed procedure can be accurate for any seismic level. The R–C_R DDBD is supposed to begin with the knowledge of the seismic excitation level (according to the structure category, site classification and owner’s requirements) and the corresponding target drift; the end of the design is to obtain the cross sections of main frame members and all the bracing parameters. The result of two 7-story buildings designed according to the R–C_R DDBD procedure demonstrates that this procedure can be effective and fairly simple for practical seismic design.     

Seismic design factors for RC special moment resisting frames in Dubai, UAE

This study investigates the seismic design factors for three reinforced concrete (RC) framed buildings with 4, 16 and 32-stories in Dubai, UAE utilizing nonlinear analysis. The buildings are designed according to the response spectrum procedure defined in the 2009 International Building Code (IBC’09). Two ensembles of ground motion records with 10% and 2% probability of exceedance in 50 years (10/50 and 2/50, respectively) are used. The nonlinear dynamic responses to the earthquake records are computed using IDARC-2D. Key seismic design parameters are evaluated; namely, response modification factor (R), deflection amplification factor (Cd), system overstrength factor (Ωo), and response modification factor for ductility (Rd) in addition to inelastic interstory drift. The evaluated seismic design factors are found to significantly depend on the considered ground motion (10/50 versus 2/50). Consequently, resolution to the controversy of Dubai seismicity is urged. The seismic design factors for the 2/50 records show an increase over their counterparts for the 10/50 records in the range of 200%-400%, except for the Ωo factor, which shows a mere 30% increase. Based on the observed trends, period-dependent R and Cd factors are recommended if consistent collapse probability (or collapse prevention performance) in moment frames with varying heights is to be expected.     

Comparing response of SDF systems to near‐fault and far‐fault earthquake motions in the context of spectral regions

In spite of important differences in structural response to near‐fault and far‐fault ground motions, this paper aims at extending well‐known concepts and results, based on elastic and inelastic response spectra for far‐fault motions, to near‐fault motions. Compared are certain aspects of the response of elastic and inelastic SDF systems to the two types of motions in the context of the acceleration‐, velocity‐, and displacement‐sensitive regions of the response spectrum, leading to the following conclusions. (1) The velocity‐sensitive region for near‐fault motions is much narrower, and the acceleration‐sensitive and displacement‐sensitive regions are much wider, compared to far‐fault motions; the narrower velocity‐sensitive region is shifted to longer periods. (2) Although, for the same ductility factor, near‐fault ground motions impose a larger strength demand than far‐fault motions—both demands expressed as a fraction of their respective elastic demands—the strength reduction factors R_y for the two types of motions are similar over corresponding spectral regions. (3) Similarly, the ratio u_m/u₀ of deformations of inelastic and elastic systems are similar for the two types of motions over corresponding spectral regions. (4) Design equations for R_y (and for u_m/u₀) should explicitly recognize spectral regions so that the same equations apply to various classes of ground motions as long as the appropriate values of T_a, T_b and T_c are used. (5) The Veletsos–Newmark design equations with T_a=0.04 s, T_b=0.35 s, and T_c=0.79 s are equally valid for the fault‐normal component of near‐fault ground motions. Copyright © 2001 John Wiley & Sons, Ltd.     

Estimation of inelastic displacement ratio for base‐isolated structures

This study develops a straightforward approximate method to estimate inelastic displacement ratio, C₁ for base‐isolated structures subjected to near‐fault and far‐fault ground motions. Taking into account the inelastic behavior of isolator and superstructure, a 2 degrees of freedom model is employed. A total of 90 earthquake ground motions are selected and classified into different clusters according to the frequency content features of records represented by the peak ground acceleration to peak ground velocity ratio, A_p/V_p. A parametric study is conducted, and effective factors in C₁ (i.e., fundamental vibration period of the superstructure, T_s; postyield stiffness ratio of the superstructure, α_s; strength reduction ratio, R; vibration period of the isolator, T_b; strength of the isolator, Q; ratio of superstructure mass to total mass of the system, γ_m) are recognized. The results indicate that the practical range of C₁ values could be expected for base‐isolated structures. Subsequently, effective parameters are included in simple predictive equations. Finally, the accuracy of the proposed approximate equations is evaluated and verified through error measurement, and comparisons are made in the analyses.     

An energy-based methodology for the assessment of seismic demand

A methodology for the assessment of the seismic energy demands imposed on structures is proposed. The research was carried out through two consecutive phases. Inelastic design input energy spectra for systems with a prescribed displacement ductility ratio were first developed. The study of the inelastic behavior of energy factors and the evaluation of the response modification in comparison with the elastic case were performed by introducing two new parameters, namely: (1) the Response Modification Factor of the earthquake input energy (R_E), representing the ratio of the elastic to inelastic input energy spectral values and (2) the ratio α of the area enclosed by the inelastic input energy spectrum in the range of periods between 0.05 and 4.0 s to the corresponding elastic value. The proposed design inelastic energy spectra, resulting from the study of a large set of strong motion records, were obtained as a function of ductility, soil type, source-to-site distance and magnitude.Subsequently, with reference to single degree of freedom systems, the spectra of the hysteretic to input energy ratio were evaluated, for different soil types and target ductility ratios. These spectra, defined to evaluate the hysteretic energy demand of structures, were described by a piecewise linear idealization that allows to distinguish three distinct regions as a function of the vibration period. In this manner, once the inelastic design input energy spectra were determined, the definition of the energy dissipated by means of inelastic deformations followed directly from the knowledge of hysteretic to input energy ratio.The design spectra of both input energy and hysteretic to input energy ratio were defined considering an elasto-plastic behavior. Nevertheless, other constitutive models were taken into account for comparison purposes.     

弹塑性位移谱法的振动台模型试验验证

弹塑性位移谱法求解结构在指定强度地面运动作用下的位移需求是一种简便合理的方法。本文将弹塑性位移谱法就具体地震波计算的楼层位移需求、层间位移角需求与一比例为1／10的12层钢筋混凝土模型框架振动台试验结果作了比较。设计的12层钢筋混凝土模型框架结构在振动台上经历了7种强度等级地震波的作用,输入峰值加速度依次为：0．090g、0．258g、0．388g、0．517g、0．646g、0．775g和0．904g。求出了弹塑性位移谱法计算的楼层位移和层问位移角需求与振动台试验结果的比值,研究了二者比值的均值及方差沿楼层的分布情况。结果表明：弹塑性位移谱法的计算结果与振动台得到的位移需求值吻合较好,在基于性能的抗震设计中具有较好的应用前景。     

Evaluation of approximate methods to estimate residual drift demands in steel framed buildings

This paper presents the evaluation of two approximate methods recently proposed in the literature to estimate residual (permanent) drift demands at the end of earthquake excitation for seismic assessment of buildings. Both methods require an estimate of the peak (maximum) interstory drift demand and the corresponding drift demand at significant yielding of the building. Additionally, an approximate method is proposed as part of this study. The introduced method follows a coefficient‐based approach similar to the Coefficient Method included in several US documents. For evaluating the approximate methods, five moment‐resisting steel framed buildings having different number of stories were analyzed under four sets of earthquake ground motions. Quantification of the accuracy of the approximate methods to estimate residual drift demands with respect to results from nonlinear time‐history analyses was performed through error measures computed for each building and each set of earthquake ground motions. Results show that the mean standard error tends to increase as the seismic hazard level increases. Between the two methods, the method introduced by Erochko et al. seems more effective in predicting residual drift demands than that proposed in the FEMA P‐58 recommendations in the USA. It is demonstrated that including additional sources of stiffness and strength in the modeling approach constrains the amplitude of residual drift demands. As a beneficial consequence, the accuracy of both approximate methods in predicting residual drift demands is significantly improved (i.e., mean standard error decreases). The introduced method also provides similar accuracy than the approximate methods available in the literature. Copyright © 2015 John Wiley & Sons, Ltd.     

Scaling of ductility and damage‐based strength reduction factors for horizontal motions

The conventional approach of obtaining the inelastic response spectra for the aseismic design of structures involves the reduction of elastic spectra via response modification factors. A response modification factor is usually taken as a product of (i) strength factor, R_S, (ii) ductility factor, R_μ, and (iii) redundancy factor, R_R. Ductility factor, also known as strength reduction factor (SRF), is considered to primarily depend on the initial time period of the single‐degree‐of‐freedom (SDOF) oscillator and the displacement ductility demand ratio for the ground motion. This study proposes a preliminary scaling model for estimating the SRFs of horizontal ground motions in terms of earthquake magnitude, strong motion duration and predominant period of the ground motion, geological site conditions, and ductility demand ratio, with a given level of confidence. The earlier models have not considered the simultaneous dependence of the SRFs on various governing parameters. Since the ductility demand ratio is not a complete measure of the cumulative damage in the structure during the earthquake‐induced vibrations, the existing definition of the SRF is sought to be modified with the introduction of damage‐based SRF (in place of ductility‐based SRF). A parallel scaling model has been proposed for estimating the damage‐based SRFs. This model considers damage and ductility supply ratio as parameters instead of ductility demand ratio. Through a parametric study on ductility‐based SRFs, it has been shown that the hitherto assumed insensitivity of earthquake magnitude and strong motion duration may not be always justified and that the initial time period of the oscillator plays an important role in the dependence of SRF on these parameters. Further, the damage‐based SRFs are found to show similar parametric dependence as observed in the case of the ductility‐based SRFs. Copyright © 2000 John Wiley & Sons, Ltd.     

Effect of causal and acausal filters on elastic and inelastic response spectra

With increasing interest in displacement spectra and long‐period motions, it is important to check the sensitivity of both elastic and inelastic response spectra to the filtering that is often necessary to remove long period artifacts, even from many modern digital recordings. Using two records of very different character from the M=7.1, 1999 Hector Mine, California, earthquake, we find that the response spectra can be sensitive to the corner periods used in causal filtering, even for oscillator periods much less than the filter corner periods. The effect is most pronounced for inelastic response spectra, where the ratio of response spectra computed from accelerations filtered at 25 and 200 sec can be close to a factor of 2 for oscillator periods less than 5 sec. Published in 2003 by John Wiley Sons, Ltd.