Palaeomagnetically defined rotations of fault-bounded continental blocks in the North Anatolian Shear Zone,North Central Anatolia

The 1200 km-long North Anatolian Transform Fault connects the East Anatolian post-collisional compressional regime in the east with the Aegean back-arc extensional regime to the west. This active dextral fault system lies within a shear zone reaching up to 100 km in width, and consists of southward splining branches. These branches, which have less frequent and smaller magnitude earthquake activity compare to the major transform, cut and divide the shear zone into fault delimited blocks. Comparison of palaeomagnetic data from 46 sites in the Eocene volcanics from different blocks indicate that each fault-bounded block has been affected by vertical block rotations. Although clockwise rotations are dominant as expected from dextral fault-bounded blocks, anticlockwise rotations have also been documented. These anticlockwise rotations are interpreted as due to anticlockwise rotation of the Anatolian Block, as indicated by GPS measurements, and the effects of unmapped faults or pre-North Anatolian Fault tectonic events.     

The termination of the North Anatolian Fault System (NAFS) in Eastern Turkey

ABSTRACT

The present-day tectonic framework of Turkey comprises mainly two strike-slip fault systems, namely dextral North Anatolian and sinistral East Anatolian faults. They are considered as the main cause of deformation patterns in Anatolia. These two mega shear systems meet at Kargapazar? village of Karl?ova county. The area to the east of the junction has a transpressional tectonic regime between the Eurasian and Arabian plates and is characterized, based on field observation, by a network of faults defining a typical horsetail splay structure. The horsetail splay is interpreted as marking the termination of the North Anatolian Fault System (NAFS), which continues eastward into the Varto Fault Zone (VFZ) and then dies out. The present study reveals that the VFZ is made up of two main parts, namely the principal displacement zone (PDZ) and the transpressional splay zone (TPSZ), both characterized by the right-lateral strike-slip with reverse motion. However, the area to the east of Varto is characterized dominantly by reverse-thrust faults and E–W-trending faults as shown by focal mechanism solutions. The generation of the VFZ as a transpressional termination to the NAFS can be related directly to the block movements of the Eurasian, Anatolian, and Arabian plates.     

Stress modeling to determine the through-going active fault geometry of the Western North Anatolian Fault,Turkey

The North Anatolian Fault (NAF) is a 1200 km long dextral strike-slip fault which is part of an east-west trending dextral shear zone (NAF system) between the Anatolian and Eurasian plates. The North Anatolian shear zone widens to the west, complicating potential earthquake rupture paths and highlighting the importance of understanding the geometry of active fault systems. In the central portion of the NAF system, just west of the town of Bolu, the NAF bifurcates into the northern and southern strands, which converge, then diverge to border the Marmara Sea. At their convergence east of the Marmara Sea, these two faults are linked through the Mudurnu Valley. The westward continuation of these two fault traces is marked by further complexities in potential active fault geometry, particularly in the Marmara Sea for the northern strand, and towards the Biga Peninsula for the southern strand. Potential active fault geometries for both strands of the NAF are evaluated by comparing stress models of various fault geometries in these regions to a record of focal mechanisms and inferred paleostress from a lineament analysis. For the Marmara region, the best-fit active fault geometry consists of the northern and southern bounding faults of the Marmara basin, as the model representing this geometry better replicated primary stress orientations seen in focal mechanism data and stress field interpretations. In the Biga Peninsula region, the active geometry of the southern strand has the southern fault merging with the northern fault through a linking fault in a narrow topographic valley. This geometry was selected over the other two as it best replicated the maximum horizontal stresses determined from focal mechanism data and a lineament analysis.     

Deciphering the Neoproterozoic history of the Hollow Fault,Avalon terrane,mainland Nova Scotia

Recognition and deciphering of the early history of fault zones is difficult because younger fabrics commonly overprint and obscure older ones. The Hollow–Greendale Fault system in the Avalon terrane of the northern Antigonish Highlands in mainland Nova Scotia has suffered many episodes of motion in the Paleozoic during development of the Appalachian orogen. Field relationship and petrographic observations indicate that its Neoproterozoic history is preserved as ca. 610 Ma NE- and NW-trending ductile shear zones within the Georgeville Group contact aureole of the intrusive syn- to late-tectonic Greendale Complex. Kinematic indicators within the NE-trending shear zone along the southwestern contact indicate dextral shear and are compatible with dextral shear indicators within the Greendale Complex and with the orientation of coeval regional F₁ fold structures within the Antigonish Highlands. The NW-trending shear zone along the northeastern contact represents either a step-over fault within a dextral shear zone or a zone of localized transpression associated with the emplacement of the Greendale Complex. Local preservation of Neoproterozoic shear zone fabrics within the Georgeville Group host rocks is attributed to the shielding effects of the proximal Greendale Complex, which acted as a rigid unit during Paleozoic deformation so that subsequent motion along the Hollow Fault was partitioned along the northeastern and southwestern contact of the complex. The Neoproterozoic history, combined with paleocontinental reconstructions, indicates that the Hollow–Greendale fault system was part of an important regional strike-slip fault zone within a volcanic arc regime along the periphery of Gondwana (Murphy et al., 1999a, Murphy et al., 1999b).     

The Erzincan earthquake of 13 March 1992 in Eastern Turkey: tectonic aspects

The tectonic significance of the Erzincan earthquake of 13 March, 1992 in Eastern Turkey is discussed. The intersection of the North Anatolian and The East Anatolian strike-slip fault zones has resulted in formation of the Erzincan pull-apart basin and new seismically active fault branches on its northeastern side. Local concentrations of surface ruptures strike along the most active branches of the North Anatolian fault zone (N300W) for 62 km. They are usually open fractures with northeastern sides uplifted up to 20 cm and rarely with dextral offset up to 10 cm. These secondary ruptures manifest indirectly oblique seismic fault displacement corresponding to the Late Quaternary motion on the fault zone, although at the surface the dextral component has been suppressed relative to the vertical one.     

The origin of Neogene tectonic rotations in the Galatean volcanic massif, central Anatolia

A paleomagnetic study was carried out on Neogene volcanic rocks at 30 sites within the Galatean massif (40.4°N, 31.5°E) to determine possible block rotations due to stress variations. Two phases of rotation could be characterized as the result of Neogene volcanic activity. We suggest that the first stage of rotation was isolated in Early Middle Miocene calc-alkali rocks, with a relative counterclockwise rotation of R ± ΔR = −20.2 ± 9.3° with respect to Eurasia. This accommodates the south-westward rotational collapse of the Western Anatolia peninsula across a pole on the Bitlis suture. In the neotectonic period, on other hand, a relative clockwise rotation of R ± ΔR = 27.3 ± 6.4° with respect to Eurasia is predicted. In contrast to the uniform clockwise rotations, extremely large clockwise rotations up to 264° are restricted in a narrow zone between two dextral faults. We believe that the second stage rotations support the idea of individual microblock rotations due to deformation along the North Anatolian Fault zone.     

Late Cenozoic tectonics and stratigraphy of northwestern Anatolia: the effects of the North Anatolian Fault to the region

In northwest Anatolia, there is a mosaic of different morpho-tectonic fragments within the western part of the right-lateral strike-slip North Anatolian Fault (NAF) Zone. These were developed from compressional and extensional tectonic regimes during the paleo- and neo-tectonic periods of Turkish orogenic history. A NE-SW-trending left-lateral strike-slip fault system (Adapazari-Karasu Fault) extends through the northern part of the Sakarya River Valley and began to develop within a N–S compressional tectonic regime which involved all of northern Anatolia during Middle Eocene to early Middle Miocene times. Since the end of Middle Miocene times, this fault system forms a border between a compressional tectonic regime in the eastern area eastwards from the northern part of the Sakarya River Valley, and an extensional tectonic regime in the Marmara region to the west. The extension caused the development of basins and ridges, and the incursions of the Mediterranean Sea into the site of the future Sea of Marmara since Late Miocene times. Following the initiation in late Middle Miocene times and the eastward propagation of extension along the western part of the NAF, a block (North Anatolian Block) began to form in the northern Anatolia region since the end of Pliocene times. The Adapazari-Karasu Fault constitutes the western boundary of this block which is bounded by the NAF in the south, the Northeast Anatolian Fault in the east, and the South Black Sea Thrust Fault in the north. The northeastward movement of the North Anatolian Block caused the formation of a marine connection between the Black Sea and the Aegean/Mediterranean Sea during the Pleistocene.     

Tectonic interpretations of enigmatic structures in the North Anatolian fault zone

Two geometrically distinct groups of syn-sedimentary and post-depositional mesofaults and joints cut Neogene-Quaternary sediments in basins situated along the convex-northwards arc of the North Anatolian fault zone between Çerkes and Erbaa. One group comprises second-order fractures interpreted as having developed during episodes of right-lateral shear along the fault zone, while the morphologically identical fractures in the other group have been interpreted as secondary products of left-lateral shear; thus apparently implying one or more former episodes of eastwards motion of the Anatolian scholle. Because such a reversal of motion would be counter to the well-established westward escape of Anatolia the structures have been called anomalous or incompatible.Alternative hypotheses which have been advanced to explain the development of the anomalous mesofractures include: localized reversals related to displacements of rigid blocks acting as buttresses within basins; selective operation of intra-pull-apart strike-slip faults; stress release; the coincidence of the present western sector of the fault with an older left-lateral fault zone; and the influence of a North Turkish neotectonic stress regime.     

Structural relationship between the Sea of Marmara Basin and the North Anatolian Fault Zone

The North Anatolian Fault (NAF) zone is 1500 km long, extending almost up to the Greek mainland in the west. It is a seismically active right-lateral strike-slip fault that accommodates the relative motion between the Turkish block and Black Sea plate. The Sea of Marmara lies along the western part of the NAF and shows evidence of subsidence. In this area pure strike-slip motion of the fault zone changes into extensional strike-slip movement that is responsible for the creation of the Sea of Marmara and the North Aegean basins. The northern half of the Sea of Marmara is interpreted as a large pull-apart basin. This basin is subdivided into three smaller basins separated by strike-slip fault segments of uplifted blocks NE-SW. Basinal areas are covered by horizontally layered sedimentary sequences. Uplifted blocks have undergone compressional stress. All the blocks are subsiding and are undergoing vertical motions and rotations relative to one another. The uplifted blocks exhibit positive Bouguer gravity anomalies. According to gravity interpretation, there is relative crustal thinning under the Sea of Marmara. The northern side of the Sea of Marmara is marked by a distinctive deep-rooted magnetic anomaly, which is dissected and shifted southward by strike-slip faulting. The southern shelf areas of the Sea of Marmara are dominated by short-wavelength magnetic anomalies of shallow origin.     

鄂尔多斯及其邻近块体相对运动的黄土古地磁证据

借助景观地理学与景观生态学原理,结合前人研究成果和野外实地考察,利用地理信息系统与遥感技术,论述了玛纳斯湖群景观第四纪以来的迁移演化过程,分析了玛纳斯湖景观动态变化的自然和人为原因,评价了玛纳斯湖景观变化产生的生态环境效应,从水资源合理利用角度提出了保护绿洲和荒漠生态环境的建设性措施.     

The Bekten Fault: the palaeoseismic behaviour and kinematic characteristics of an intervening segment of the North Anatolian Fault Zone,Southern Marmara Region,Turkey

The Bekten Fault is 20-km long N55°E trending and oblique-slip fault in the dextral strike-slip fault zone. The fault is extending sub-parallel between Yenice-Gönen and Sar?köy faults, which forms the southern branch of North Anatolian Fault Zone in Southern Marmara Region. Tectonomorphological structures indicative of the recent fault displacements such as elongated ridges and offset creeks observed along the fault. In this study, we investigated palaeoseismic activities of the Bekten Fault by trenching surveys, which were carried out over a topographic saddle. The trench exposed the fault and the trench stratigraphy revealed repeated earthquake surface rupture events which resulted in displacements of late Pleistocene and Holocene deposits. According to radiocarbon ages obtained from samples taken from the event horizons in the stratigraphy, it was determined that at least three earthquakes resulting in surface rupture generated from the Bekten Fault within last ~1300 years. Based on the palaeoseismological data, the Bekten Fault displays non-characteristic earthquake behaviour and has not produced any earthquake associated with surface rupture for about the last 400 years. Additionally, the data will provide information for the role of small fault segments play except for the major structures in strike-slip fault systems.     

Late Quaternary activity and dextral strike-slip movement on the Karakax Fault Zone, northwest Tibet

Field observations and interpretations of satellite images reveal that the westernmost segment of the Altyn Tagh Fault (called Karakax Fault Zone) striking WNW located in the northwestern margin of the Tibetan Plateau has distinctive geomorphic and tectonic features indicative of right-lateral strike-slip fault in the Late Quaternary. South-flowing gullies and N–S-trending ridges are systematically deflected and offset by up to ~ 1250 m, and Late Pleistocene–Holocene alluvial fans and small gullies that incise south-sloping fans record dextral offset up to ~ 150 m along the fault zone. Fault scarps developed on alluvial fans vary in height from 1 to 24 m. Riedel composite fabrics of foliated cataclastic rocks including cataclasite and fault gouge developed in the shear zone indicate a principal right-lateral shear sense with a thrust component. Based on offset Late Quaternary alluvial fans, ¹⁴C ages and composite fabrics of cataclastic fault rocks, it is inferred that the average right-lateral strike-slip rate along the Karakax Fault Zone is ~ 9 mm/a in the Late Quaternary, with a vertical component of ~ 2 mm/a, and that a M 7.5 morphogenic earthquake occurred along this fault in 1902. We suggest that right-lateral slip in the Late Quaternary along the WNW-trending Karakax Fault Zone is caused by escape tectonics that accommodate north–south shortening of the western Tibetan Plateau due to ongoing northward penetration of the Indian plate into the Eurasian plate.     

The South Marmara Fault

We use about 800 km of multichannel exploration seismic reflection profiles of the seventies as well as the results of three drill holes that penetrated the sedimentary cover down to the Upper Cretaceous basement to describe a continuous gently curvilinear, south-concave zone of deformation about 10 km wide that extended over the whole southern shelf of the Sea of Marmara from the Gulf of Gemlik to the Dardanelles Straits in Lower Pliocene time, about 4 Ma. We call this zone of deformation the South Marmara Fault (SMF) system and propose that the SMF was then a branch of the dextral North Anatolian Fault. This branch passed to the north of the Marmara Island Eocene block and thus had a south-facing concavity. This curvature resulted in a significant component of shortening in the western part of the fault. The SMF was deactivated at the end of Lower Pliocene, about 3.5 Ma, except for its easternmost branch between the Gulf of Gemlik and ?mral? Island where about 5 mm/year of dextral motion is still occurring today.     

Upper Neogene stratigraphy and tectonics of Death Valley — a review

New tephrochronologic, soil-stratigraphic and radiometric-dating studies over the last 10 years have generated a robust numerical stratigraphy for Upper Neogene sedimentary deposits throughout Death Valley. Critical to this improved stratigraphy are correlated or radiometrically-dated tephra beds and tuffs that range in age from > 3.58 Ma to < 1.1 ka. These tephra beds and tuffs establish relations among the Upper Pliocene to Middle Pleistocene sedimentary deposits at Furnace Creek basin, Nova basin, Ubehebe–Lake Rogers basin, Copper Canyon, Artists Drive, Kit Fox Hills, and Confidence Hills. New geologic formations have been described in the Confidence Hills and at Mormon Point. This new geochronology also establishes maximum and minimum ages for Quaternary alluvial fans and Lake Manly deposits. Facies associated with the tephra beds show that ∼3.3 Ma the Furnace Creek basin was a northwest–southeast-trending lake flanked by alluvial fans. This paleolake extended from the Furnace Creek to Ubehebe. Based on the new stratigraphy, the Death Valley fault system can be divided into four main fault zones: the dextral, Quaternary-age Northern Death Valley fault zone; the dextral, pre-Quaternary Furnace Creek fault zone; the oblique–normal Black Mountains fault zone; and the dextral Southern Death Valley fault zone. Post − 3.3 Ma geometric, structural, and kinematic changes in the Black Mountains and Towne Pass fault zones led to the break up of Furnace Creek basin and uplift of the Copper Canyon and Nova basins. Internal kinematics of northern Death Valley are interpreted as either rotation of blocks or normal slip along the northeast–southwest-trending Towne Pass and Tin Mountain fault zones within the Eastern California shear zone.     

Neotectonics of Turkey – a synthesis

Turkey forms one of the most actively deforming regions in the world and has a long history of devastating earthquakes. The better understanding of its neotectonic features and active tectonics would provide insight, not only for the country but also for the entire Eastern Mediterranean region. Active tectonics of Turkey is the manifestation of collisional intracontinental convergence- and tectonic escape-related deformation since the Early Pliocene (∼5 Ma). Three major structures govern the neotectonics of Turkey; they are dextral North Anatolian Fault Zone (NAFZ), sinistral East Anatolian Fault Zone (EAFZ) and the Aegean–Cyprean Arc. Also, sinistral Dead Sea Fault Zone has an important role. The Anatolian wedge between the NAFZ and EAFZ moves westward away from the eastern Anatolia, the collision zone between the Arabian and the Eurasian plates. Ongoing deformation along, and mutual interaction among them has resulted in four distinct neotectonic provinces, namely the East Anatolian contractional, the North Anatolian, the Central Anatolian ‘Ova’ and the West Anatolian extensional provinces. Each province is characterized by its unique structural elements, and forms an excellent laboratory to study active strike-slip, normal and reverse faulting and the associated basin formation.     

From transpression to transtension: changes in morphology and structure around a bend on the North Anatolian Fault in the Marmara region

The east–west-trending North Anatolian Fault makes a 17° bend in the western Marmara region from a mildly transpressional segment to a strongly transtensional one. We have studied the changes in the morphology and structure around this fault bend using digital elevation models, field structural geology, and multi-channel seismic reflection profiles. The transpression is reflected in the morphology as the Ganos Mountain, a major zone of uplift, 10 km wide and 35 km long, elongated parallel to the transpressional Ganos Fault segment west of this bend. Flat-lying Eocene turbidites of the Thrace Basin are folded upwards against this Ganos Fault, forming a monocline with the Ganos Mountain at its steep southern limb and the flat-lying hinterland farther north at the flat limb. The sharp northern margin of the Ganos Mountain coincides closely with the monoclinal axis. The strike of the bedding, and the minor and regional fold axes in the Eocene turbidites in Ganos Mountain are parallel to the trace of the Ganos Fault indicating that these structures, as well as the morphology, have formed by shortening perpendicular to the North Anatolian Fault. The monoclinal structure of Ganos Mountain implies that the North Anatolian Fault dips under this mountain at 50°, and this ramp terminates at a decollement at a calculated depth of 8 km. East of this fault bend, the northward dip of the North Anatolian Fault is maintained but it has a normal dip-slip component. This has led to the formation of an asymmetric half-graben, the Tekirdağ Basin in the western Sea of Marmara, containing a thickness of up to 2.5 km of Pliocene to Recent syn-transform sediments. As the Ganos uplift is translated eastwards from the transpressional to the transtensional zone, it undergoes subsidence by southward tilting. However, a morphological relic of the Ganos uplift is maintained as the steep northern submarine slope of the Tekirdağ Basin. The minimum of 3.5 km of fault-normal shortening in the Ganos Mountain, and the minimum of 40 km eastward translation of the Ganos uplift indicate that the present fault geometry has existed for at least the last 2 million years.     

黄海深部结构与中朝-扬子块体结合带在海区位置的地球物理研究

以黄海及其邻区为研究对象 ( 32～ 4 2°N ,1 2 0～ 1 30°E) ,以研究区的空间重力异常、布格重力异常和地震层析成像数据为基础 ,在研究区中分辨出方向各异的主要断裂带并给出它们的分布。对在朝鲜半岛存在的一条近SN向分布的断裂带进行了重点讨论。根据重力数据、莫霍深度分布特点和层析成像的结果 ,认为该断裂带的两侧应属于不同的构造地质单元 ;提出该断裂带与五莲—青岛断裂带和济州岛南缘断裂带一起组成了中朝与扬子块体在黄海海区的边界结合带的认识 ;并推测在三叠纪的晚期 ,沿郯庐断裂带和该断裂带曾分别发生过左旋和右旋走滑。受SN向挤压应力的作用 ,(下 )扬子块体被平移嵌入到中朝块体之中。因此 ,两个块体在海区的结合带为一个巨大的“Z”字型的入构造     

Closing-up structures, alternatives to pull-apart basins; the effect of bends in the North Anatolian Fault, Turkey

Fault blocks passing bends or stepovers in a fault zone must adapt their margins to the uneven fault trace. Two cases of adaption are distinguished for extensional bends or stepovers (transtension): (1) The fault margins close up behind a single bend ('knickpoint') of a strike-slip fault and a 'closing-up structure' (new term) arises or (2) fault-block margins are extended behind a releasing bend (double bend) or stepover parallel to the displacement and a pull-apart basin originates. The dosing up described here is accomplished by acute-angled synthetic strike-slip faults that dissect the straight fault in front of a knickpoint to form a zig-zag block boundary behind it. Crustal extension is also involved in the closing-up structure, but in a different way from typical pull-apart basins.
The closing-up structure illustrated was developed behind an extensional knickpoint in the North Anatolian Fault west of Lake Abant, NW Turkey, where the process of closing up continues to this day. The kinematic model of this closing-up structure is supported by displacements and ruptures observed during the 1967 Mudurnu valley earthquake and the 1957 Abant earthquake.     

The <Emphasis Type="Italic">M</Emphasis> = 5.1 1980 Arudy earthquake sequence (western Pyrenees,France): a revisited multi-scale integrated seismologic,geomorphologic and tectonic investigation

This paper presents a combination of seismic imaging, geomorphologic, and tectonic data and an interpretation of the M = 5.1 1980 Arudy earthquake sequence putting in relation the seismicity, the inherited faults, and the geomorphologic (Würm and postwürm) markers in this region of the Pyrenees. Since the anticlockwise rotation of the regional compression axis in Oligocene time, western Pyrenees are under a dextral regime and the resulting motion is accommodated along major inherited E–W dextral strike-slip faults. The Arudy aftershocks sequence is controlled by antecedent horsetail splay faults built at the boundary between two shallow Mesozoic crustal blocks most probably due to their differing rheology. This boundary has played the role of a seismic barrier stopping the E–W slip motion. The Arudy earthquake has reactivated the eastern segment of the main E–W strike-slip fault, while the post-seismic aftershocks correspond to local relaxation processes in normal tectonic behavior.     

40Ar/39Ar dating of the Jiali and Gaoligong shear zones: Implications for crustal deformation around the Eastern Himalayan Syntaxis

We conducted a comprehensive ⁴⁰Ar/³⁹Ar geochronological study of the Jiali and Gaoligong shear zones to obtain a better understanding of crustal deformation and tectonic evolution around the Eastern Himalayan Syntaxis (EHS). The new age data reveal that the main phase of deformation in the Jiali and Gaoligong shear zones occurred from 22 to 11 Ma and from 18 to 13 Ma, respectively. Structural data collected during this study indicate that the Jiali shear zone underwent a change in shear sense from sinistral to dextral during its movement history. Based on a comparison with the deformation histories of other major shear zones in the region, we argue that the initial sinistral motion recorded by the Jiali shear zone was coincident with that of the Ailao Shan–Red River shear zone, which marked the northern boundary of the southeastward extrusion of the Indochina block during the Early Miocene. From the Middle Miocene (～18 Ma), the Jiali shear zone changed to dextral displacement, becoming linked with the dextral Gaoligong shear zone that developed as a consequence of continued northward indentation of the Indian continent into Asia. Since this time, the Jiali and Gaoligong shear zones have been united, defining the southwestern boundary of the EHS during clockwise rotation of the eastward-extruding Tibetan block, as revealed by recent GPS data. The temporal change in regional deformation pattern from southeastward block extrusion to clockwise rotation of crustal fragments may have played an important role in the development of the eastern Himalayan drainage system around the EHS.