A hydrogeophysical model of the relationship between geoelectric and hydraulic parameters of anisotropic aquifers

An electrical resistivity method has been used to determine aquifer parameters in the Ganga-Yamuna interfluve in northern India. An existing relationship between the geoelectrical and hydraulic parameters has been modified for the case of an anisotropic aquifer. The hydrogeological framework in the upper part of the Ganga-Yamuna interfluve is evaluated by using existing relationships between hydraulic parameters and geoelectrical parameters for alluvial aquifers. On the basis of aquifer geometry, the area has been divided into two hydraulic units: the western Yamuna flood plain and the Ganga flood plain towards the east. The resistivity data collected in parts of the study area are first interpreted in terms of true resistivity and thicknesses of subsurface layers. The electrical parameters (resistivity and thicknesses) are subsequently correlated with the available pumping test data. Distinct correlations between transmissivity and modified transverse resistance are obtained for the two hydraulic units. A four-parameter model consisting of hydraulic conductivity, modified longitudinal resistivity, modified transverse resistance and hydraulic anisotropy is presented for the anisotropic aquifer underlain by conductive fine grained sediments. The model has been validated at a number of locations, where aquifer parameters are known from pumping test data.     

Mega- and giant ripples in the Ganga,Yamuna, and Son Rivers,Uttar Pradesh,India

Sand bars of the three important rivers of the Gangetic Alluvium, namely the Ganga, Yamuna and Son are investigated. Megaripples of undulatory type are the most abundant bed forms present, and are responsible for the development of large-scale cross-bedding, the most common bedding structure present in the area. Giant ripples, with superimposed megaripples are recorded in one sand bar in the Yamuna River. On a steeply sloping point bar in the Ganga River, delta-like lobes have produced foreset bedding oriented towards the main channel, at right angles to the direction of the main flow.     

Integrated geoelectrical survey for groundwater and shallow subsurface evaluation: case study at Siliyin spring, El-Fayoum, Egypt

Siliyin spring is one of the many natural fresh water springs in the Western Desert of Egypt. It is located at the central part of El-Fayoum Delta, which is a potential place for urban developments and touristic activities. Integrated geoelectrical survey was conducted to facilitate mapping the groundwater resources and the shallow subsurface structures in the area. Twenty-eight transient electromagnetic (TEM) soundings, three vertical electrical soundings (VES) and three electrical resistivity tomography (ERT) profiles were carried out around the Siliyin spring location. The dense cultivation, the rugged topography and the existence of infra structure in the area hindered acquiring more data. The TEM data were inverted jointly with the VES and ERT, and constrained by available geological information. Based on the inversion results, a set of geoelectrical cross-sections have been constructed. The shallow sand to sandy clay layer that forms the shallow aquifer has been completely mapped underneath and around the spring area. Flowing of water from the Siliyin spring is interconnected with the lateral lithological changes from clay to sand soil. Exploration of the extension of Siliyin spring zone is recommended. The interpretation emphasizes the importance of integrating the geoelectrical survey with the available geological information to obtain useful, cheap and fast lithological and structural subsurface information.     

Dissolved rhenium in the Yamuna river system and the Ganga in the Himalaya: role of black shale weathering on the budgets of Re, Os, and U in rivers and CO2 in the atmosphere

Extensive measurements of dissolved Re and major ion abundances in the Yamuna River System (YRS), a major tributary of the Ganga, have been performed along its entire stretch in the Himalaya, from its source near the Yamunotri Glacier to its outflow at the foothills of the Himalaya at Saharanpur. In addition, Re analysis has been made in granites and Precambrian carbonates, some of the major lithologies of the drainage basin. These data, coupled with those available for black shales in the Lesser Himalaya, allow an assessment of these lithologies’ contributions to the Re budget of the YRS.The Re concentrations in the YRS range from 0.5 to 35.7 pM with a mean of 9.4 pM, a factor of ∼4 higher than that reported for its global average concentration in rivers. Dissolved Re and ΣCations∗ (= Na∗+K+Ca+Mg) are strongly correlated in the YRS, indicating that they are released to these waters in roughly the same proportion throughout their course. The Re/ΣCations∗ in most of these rivers are one to two orders of magnitude higher than the (Re/Na+K+Mg+Ca) measured in granites of the Yamuna basin. This leads to the conclusion that, on average, granites/crystallines make only minor contributions to the dissolved Re budget of the YRS on a basin-wide scale, though they may be important for rivers with low dissolved Re. Similarly, Precambrian carbonates of the Lesser Himalaya do not seem to be a major contributor to dissolved Re in these rivers, as their Re/(Ca+Mg) is much less than those in the rivers. The observation that Re concentrations in rivers flowing through black shales and in groundwaters percolating through phosphorite-black shale-carbonate layers in phosphorite mines are high, and that Re and SO₄ are significantly correlated in YRS, seems to suggest that the bulk of the dissolved Re is derived from black shale/carbonaceous sediments. Material balance considerations, based on average Re of 30 ng g⁻¹ in black shales from the Lesser Himalaya, require that its abundance in the drainage basin of the YRS needs to be a few percent to yield average Re of 9.4 pM. Furthermore, the positive correlation between Re and ΣCations∗ would require that these Re-rich sediments (e.g., black shales) and Re-poor lithologies (e.g., crystallines, Precambrian carbonates) contribute Re and cations in roughly the same proportion throughout the drainage basin. The available data on the abundance and distribution of black shales in the basin are not adequate to test if these requirements can be met.The annual fluxes of dissolved Re at the base of the Himalaya from the Yamuna are ∼150 mol at Batamandi and ∼100 mol at Saharanpur, compared to ∼120 mol from the Ganga at Rishikesh. The total flux from the Yamuna and the Ganga account for ∼0.4% of the global riverine Re flux, much higher than their contribution to global water discharge. This is also borne out from the mobilization rate of Re: ∼1 to 3 g km⁻² y⁻¹ in the Ganga and Yamuna basins in the Himalaya, compared to the global average of ∼0.1 g km⁻² y⁻¹.Black shale weathering can also significantly influence the budgets of Os and U in rivers and CO₂ in rivers and the atmosphere. Using dissolved Re in rivers as a proxy, it is estimated that ∼(6-9) × 10⁸ kg y⁻¹ of black shales are being weathered in the Ganga and Yamuna basins in the Himalaya. Weathering of such amounts of black shales can account for the reported concentrations of Os and U in these rivers. Furthermore, if the weathering results in the conversion of organic carbon in the black shales to CO₂, it would release ∼2 × 10⁵ mol of CO₂ km⁻² y⁻¹ in the Yamuna and Ganga basins in the Himalaya, comparable to the CO₂ consumption from silicate weathering.     

Chemical weathering in the plain and peninsular sub-basins of the Ganga: Impact on major ion chemistry and elemental fluxes

Concentrations of major ions, Sr and ⁸⁷Sr/⁸⁶Sr have been measured in the Gomti, the Son and the Yamuna, tributaries of the Ganga draining its peninsular and plain sub-basins to determine their contribution to the water chemistry of the Ganga and silicate and carbonate erosion of the Ganga basin. The results show high concentrations of Na and Sr in the Gomti, the Yamuna and the Ganga (at Varanasi) with much of the Na in excess of Cl. The use of this ‘excess Na’ (Na∗ = Na_riv − Cl_riv) a common index of silicate weathering yield values of ∼18 tons km⁻² yr⁻¹ for silicate erosion rate (SER) in the Gomti and the Yamuna basins. There are however, indications that part of this Na∗ can be from saline/alkaline soils abundant in their basins, raising questions about its use as a proxy to determine SER of the Ganga plain. Independent estimation of SER based on dissolved Si as a proxy give an average value of ∼5 tons km⁻² yr⁻¹ for the peninsular and the plain drainages, several times lower than that derived using Na∗. The major source of uncertainty in this estimate is the potential removal of Si from rivers by biological and chemical processes. The Si based SER and CER (carbonate erosion rate) are also much lower than that in the Himalayan sub-basin of the Ganga. The lower relief, runoff and physical erosion in the peninsular and the plain basins relative to the Himalayan sub-basin and calcite precipitation in them all could be contributing to their lower erosion rates.Budget calculations show that the Yamuna, the Son and Gomti together account for ∼75% Na, 41% Mg and ∼53% Sr and ⁸⁷Sr of their supply to the Ganga from its major tributaries, with the Yamuna dominating the contribution. The results highlight the important role of the plain and peninsular sub-basins in determining the solute and Sr isotope budgets of the Ganga. The study also shows that the anthropogenic contribution accounts for ?10% of the major ion fluxes of the Ganga at Rajmahal during high river stages (October). The impact of both saline/alkaline soils and anthropogenic sources on the major ion abundances of the Ganga is minimum during its peak flow and therefore the SER and CO₂ consumption rates of the river is best determined during this period.     

Geophysical characterization of the León-Chinandega aquifer,Nicaragua

Electrical geophysical surveys in the mode of vertical electrical soundings (VES) and continuous vertical electrical soundings (CVES) were conducted in the León-Chinandega plains, northwestern Nicaragua, in order to obtain detailed information about the geometry of the different hydrogeological layers in the aquifer and depth to the basement. A total of 51 VES were carried out within the plains. The results show a complex structure towards the north east of the area, and the southwestern part of the plains presents a smoother stratification. The geoelectrical measurements and borehole information indicate that the basement topography is characterized by hills and deep valleys with highly variable basement depths. Fifty CVES where done in a smaller area in the center of the plain. The resistivity data yielded considerable information revealing the existence of two main geo-electrical units. The combined interpretation of geological and geophysical data shows an environment typical of sedimentary volcanic coastal plains. The information collected during this investigation provides valuable data for estimating the fresh-water resources of the León-Chinandega aquifer system and for development of a groundwater management plan.     

Steady State Strength Behavior of Yamuna Sand

The paper pertains to the study of steady state or residual strength of sandy soils (Yamuna sand lying in the Indo-Gangetic alluvial plains) by consolidated rebounded drained triaxial test with volume change measurements and strain-controlled consolidated undrained test as well. The observed behavior obtained from these two tests is then compared to check their comparative merit. The same was also compared with those of Ganga and Toyoura sand, and with the predicted behavior obtained by using a semi empirical model. The results obtained from rebounded drained and undrained tests are found to be in good agreement. The curvature of ultimate steady state line of Yamuna sand is similar in trend to Ganga and Toyoura sand in the initial mean effective principle stress range; but the experimental observations with reference to Yamuna sand is not in good agreement with the model predictions in the region of higher mean normal stress. A semi empirical general model has been developed fitting the data for better prediction of the steady state behavior.     

Electromagnetic Resistivity Profiling For Locating Buried River Channels: A Case Study In Haiti

The Service National des Ressources en Eau (SNRE) of the Ministry of Agriculture of Haiti, in cooperation with the UNDTCD, carried out a geophysical investigation in the Northern Plain of Haiti. It included a reinterpretation of the available resistivity soundings and the realization of eight additional soundings and 11 electromagnetic profiles. The mathematical interpretation of the soundings permitted the determination of the true resistivity of different lithologies present in the area and the mapping of the thickness of the alluvial aquifer. The results of the five electromagnetic resistivity profiles in the Trou du Nord area are presented, with a total lenght of 17.4 km. They show distinctive resistivity anomalies, which are assumed to represent buried river channels filled with coarse sands and gravels. One of the anomaly zones was explored in more detail and shows clearly lateral resistivity differences at greater depths. The data interpretations have been checked through response calculations of geoelectrical layer models.     

Groundwater condition based on geoelectrical technique and Dar Zarrouk parameters between El Alamein and El Dabaa—Egypt

El Alamein-El-Dabaa area lies in the western Mediterranean coastal zone of Egypt with about 50 km long. The aims of the present study are the shallow groundwater aquifer determination and calculate the electric parameters of the overburden to achieve the easiest way for detecting groundwater contamination and considered it during the planning of new development project(s). To attain this target, 44 vertical resistivity soundings using Schlumberger array of the maximum AB/2?=?1000 m in the form of four profiles were carried out. From the interpretation results, six geoelectrical layers have been established in the area, and iso-resistivity, depth to water, and isopach contour maps are presented. Four geoelectrical cross-sections (two geoelectrical cross-sections are parallel to the Mediterranean shoreline and the other two are normal to the Mediterranean shoreline) have been constructed. According to this work, the upper part of the Oolitic Limestone represents the shallow groundwater aquifer in this area and can be distinguished into two zones. The upper zone is brackish, whereas the lower one is saline. The geoelectrical succession reveals that the aquifer is free type. The depth to water ranges between 20 and 63 m; therefore, it is the choice as the best sites for groundwater exploitation. In the area under study, the depth to water and the thickness of the brackish increase towards the south side as well as the depth to the brackish water. The Dar-Zarrouk parameters clarified that there are some parts that may contaminate pathways and other parts are not.     

Array magnetotelluric soundings in the active seismic area of Northern Tien Shan

High-density array MT soundings of the crust in the seismically active northern Tien Shan were performed using Phoenix MTU-5 stations in the Bishkek Geodynamic Polygon, at the junction of the Chu basin and the Kyrgyz Range. The MT transfer functions were determined to an accuracy of 1–2% (amplitude) and about 0.5–0.8 deg (phase) in most of 145 soundings. Preliminary analysis of the collected data aimed at estimating the geoelectrical dimensionality. The Bahr decomposition analysis indicated the presence of local 3D structures in the crust of the area superposed on the regional 2D structure.     

Sr and Sr/Sr in the Yamuna River System in the Himalaya: sources, fluxes, and controls on sr isotope composition

Sr and ⁸⁷Sr/⁸⁶Sr have been measured in the Yamuna river headwaters and many of its tributaries (YRS) in the Himalaya. These results, with those available for major ions in YRS rivers and in various lithologies of their basin, have been used to determine their contributions to riverine Sr and its isotopic budget. Sr in the YRS ranges from 120 to 13,400 nM, and ⁸⁷Sr/⁸⁶Sr from 0.7142 to 0.7932. Streams in the upper reaches, draining predominantly silicates, have low Sr and high ⁸⁷Sr/⁸⁶Sr whereas those draining the lower reaches exhibit the opposite resulting from differences in drainage lithology. ⁸⁷Sr/⁸⁶Sr shows significant co-variation with SiO₂/TDS and (Na^* + K)/TZ⁺ (indices of silicate weathering) in YRS waters, suggesting the dominant role of silicate weathering in contributing to high radiogenic Sr. This is also consistent with the observation that streams draining largely silicate terrains have the highest ⁸⁷Sr/⁸⁶Sr, analogous to that reported for the Ganga headwaters. Evaluation of the significance of other sources such as calc-silicates and trace calcites in regulating Sr budget of these rivers and their high ⁸⁷Sr/⁸⁶Sr needs detailed work on their Sr and ⁸⁷Sr/⁸⁶Sr. Preliminary calculations, however, indicate that they can be a significant source to some of the rivers.It is estimated that on an average, ∼25% of Sr in the YRS is derived from silicate weathering. In the lower reaches, the streams receive ∼15% of their Sr from carbonate weathering whereas in the upper reaches, calc-silicates can contribute significantly (∼50%) to the Sr budget of rivers. These calculations reveal the need for additional sources for rivers in the lower reaches to balance their Sr budget. Evaporites and phosphorites are potential candidates as judged from their occurrence in the drainage basin. In general, Precambrian carbonates, evaporites, and phosphorites “dilute” the high ⁸⁷Sr/⁸⁶Sr supplied by silicates, thus making Sr isotope distribution in YRS an overall two end member mixing. Major constraints in quantifying contributions of Sr and ⁸⁷Sr/⁸⁶Sr from different sources to YRS rivers are the wide range in Sr and ⁸⁷Sr/⁸⁶Sr of major lithologies, limited data on Sr and ⁸⁷Sr/⁸⁶Sr in minor phases and on the behavior of Sr, Na, and Ca during weathering and transport.The Ganga and the Yamuna together transport ∼0.1% of the global Sr flux at the foothills of the Himalaya which is in the same proportion as their contribution to global water discharge. Dissolved Sr flux from the Yamuna and its mobilization rate in the YRS basin is higher than those in the Ganga basin in the Himalaya, a result consistent with higher physical and chemical erosion rates in the YRS.     

Geoelectrical resistivity survey for the evaluation of hydrogeological condition of Bagerhat Sadar and the adjacent areas, Bangladesh

This study has been conducted to find out the aquifer characteristics of Bagerhat Sadar and adjacent areas in Bangladesh using geoelectrical resistivity method and borehole logs. The interpretation of resistivity soundings (14 nos.) shows that the sub-surface lithological sequence can be divided into four geoelectric units. The deepest geoelectric unit (with resistivity from 8 Ohm-m to 18 Ohm-m) represents the deep aquifer with usually fresh water. Resistivity values of 12 ?m or more for this unit may indicate formation water as acceptable for coastal people. In the study area, the shallow aquifer inferred is not suitable for groundwater development.     

Gradient profiling for the investigation of groundwater saturated fractures in hard rocks of Uttar Pradesh,India

Gradient profiling (GP) has been successfully utilized as a preliminary tool to identify fractured zones saturated with groundwater in hard-rock areas of Robertsganj, Sonebhadra district, Uttar Pradesh, India. Conducting geoelectrical sounding at randomly selected places may not provide fruitful results since fractures are sparsely distributed in hard rocks. In gradient profiling, current electrodes with large separation remain fixed while the potential dipole is moved between the current electrodes in the central one-third portion of the profile at a small station interval. A GP survey was conducted along seven profiles having different lengths in two small sectors of the study area. Low resistive zones have been identified which correspond to the fractured zones. A few geoelectrical soundings were carried out to investigate the depth and thickness of the fractured zones. Two test boreholes, one drilled in each sector, yielded continuous discharge of fresh water (18,000–24,000 L/h). The present study confirms the findings of previous work that the GP survey is a powerful initial technique that identifies the presence of a fractured zone, especially in a hard-rock area covered with a thin soil layer.     

Hydrogeophysical investigation and estimation of groundwater potentials of the Lower Palaeozoic to Precambrian crystalline basement rocks in Keffi area, north-central Nigeria, using resistivity methods

The use of resistivity sounding and two-dimensional (2-D) resistivity imaging was investigated with the aim of delineating and estimating the groundwater potential in Keffi area. Rock types identified are mainly gneisses and granites. Twenty-five resistivity soundings employing the Schlumberger electrode array were conducted across the area. Resistivity sounding data obtained were interpreted using partial curve matching approach and 1-D inversion algorithm, RESIST version 1.0. The 2-D resistivity imaging was also carried out along two traverses using dipole–dipole array, and the data obtained were subjected to finite element method modeling using DIPRO inversion algorithm to produce a two-dimensional subsurface geological model. Interpretation of results showed three to four geoelectrical layers. Layer thickness values were generally less than 2 m for collapsed zone, and ranged from 5 to 30 m for weathered bedrock (saprolite). Two major aquifer units, namely weathered bedrock (saprolite) aquifer and fractured bedrock (saprock) aquifer, have been delineated with the latter usually occurring beneath the former in most areas. Aquifer potentials in the area were estimated using simple schemes that involved the use of three geoelectrical parameters, namely: depth to fresh bedrock, weathered bedrock (saprolite) resistivity and fractured bedrock (saprock) resistivity. The assessment delineated the area into prospective high, medium and low groundwater potential zones.     

Sr isotopic signature of the Ganga Alluvial Plain and its implication to Sr flux of the Ganga River System

The influx of Sr responsible for increase in marine Sr has been attributed to rise of Himalaya and weathering of the Himalayan rocks. The rivers draining Himalaya to the ocean by the northern part of the Indian sub-continent comprising the Ganga Alluvial Plain (GAP) along with Central parts of the Himalaya and the northern part of the Indian Craton are held responsible for the transformation of Sr isotopic signature. The GAP is basically formed by the Himalayan-derived sediments and serves as transient zone between the source (Himalaya) and the sink (Bay of Bengal). The Gomati River, an important alluvial tributary of the Ganga River, draining nearly 30,500 km² area of GAP is the only river which is originating from the GAP. The river recycles the Himalayan-derived sediments and transport its weathering products into the Ganga River and finally to Bay of Bengal. 11 water samples were collected from the Gomati River and its intrabasinal lakes for measurement of Sr isotopic composition. Sr concentration of Gomati River water is about 335 μg/l, which is about five times higher than the world’s average of river water (70 μg/l) and nearly three times higher than the Ganga River water in the Himalaya (130 μg/l) The Sr isotopic ratios reported are also higher than global average runoff (0.7119) and to modern seawater (0.7092) values. Strong geochemical sediment–water interaction appearing on surface is responsible for the dissolved Sr isotopic ratios in the River water. Higher Sr isotopic rations found during post-monsoon than in pre-monsoon season indicate the importance of fluxes due to monsoonal erosion of the GAP into the Gomati River. Monsoon precipitation and its interaction with alluvium appear to be major vehicle for the addition of dissolved Sr load into the alluvial plain rivers. This study establishes that elevated ⁸⁷Sr/⁸⁶Sr ratios of the Gomati River are due to input of chemical weathering of alluvial material present in the Ganga Alluvial Plain.     

Measurements of spectral induced polarization for environmental purposes

Hydraulic permeability is one of the most important parameters for the evaluation of sediments relevant to environmental and hydrogeological problems. Up to now, permeability could be determined only by time-consuming and expensive methods like pumping tests or sampling and laboratory investigations. The results are confined to few locations, and they depend on the scale of the investigation method. Measurements on rock samples in a laboratory can differ significantly from well test results. Geophysical measurements are performed on different scales from high resolution measurements in boreholes up to large-scale soundings. Variations in permeability are mainly caused by varying grain size and by changes in porosity. A decrease of average grain diameter results in an increasing internal surface area. Petrophysical investigations have shown a reliable correlation between the imaginary part of electrical conductivity and the porespace-related internal surface. The formation resistivity factor, which is related to porosity, can be determined by geoelectrical measurements if the electrical conductivity of the pore fluid is known. The internal surface area and the formation factor are the only two parameters used by a Kozeny-Carman-like equation to evaluate the permeability or hydraulic conductivity for the investigated representative volume. Complex electrical conductivity is determined by measurements of induced polarization in the frequency domain. Frequencies below 10 Hz are used to avoid electromagnetic coupling. The permeability values determined by electrical measurements in boreholes can well be compared with those derived from the grain size distribution of samples. The same algorithm can be applied to evaluate the hydraulic conductivity of subsurface layers by complex resistivity soundings. The high sensitivity of the imaginary conductivity component to changes at the internal surface may be used as an indicator for contaminations.     

Migration of the Ganga river and its implication on hydro-geological potential of Varanasi area, U.P., India

Borehole data reveals that during Late Quaternary, the Ganga river was non-existent in its present location near Varanasi. Instead, it was flowing further south towards peripheral craton. Himalayan derived grey micaceous sands were being carried by southward flowing rivers beyond the present day water divide of Ganga and mixed with pink arkosic sand brought by northward flowing peninsular rivers. Subsequently, the Ganga shifted to its present position and got incised. Near Varanasi, the Ganga river is flowing along a NW-SE tectonic lineament. The migration of Ganga river is believed to have been in response to basin expansion caused due to Himalayan tectonics during Middle Pleistocene times. Multi-storied sand bodies generated as a result of channel migration provide excellent aquifers confined by a thick zone of muddy sediments near the surface. Good quality potable water is available at various levels below about 70 m depth in sandy aquifers. Craton derived gravelly coarse-to-medium grained sand forms the main aquifer zones of tens of meter thickness with enormous yield. In contrast, the shallow aquifers made up of recycled interfluve silt and sandy silt occur under unconfined conditions and show water-level fluctuation of a few meters during pre-and post-monsoon periods.     

Morphotectonic Appraisal of Yamuna River Basin in Headwater Region: A Relative Active Tectonics Purview

In the present paper integrated appraisals of landform evolution and their geomorphic features, drainage networks across the upper part of Yamuna river basin have been attempted by using various geomorphic indices such as watershed, drainage density (D), drainage texture, stream-gradient index (SL), hypsometric integral (HI), drainage basin asymmetry (AF), mountain front sinuosity (Smf), sinuosity index (SI), valley floor height and width ratio (Vf) and data of historical earthquakes in characterizing the basin in view of relative index of active tectonics (RIAT) on DEM in geographic information systems (GIS) environment to assess the influence of recent tectonics on geomorphologic growth of the basin.The substantiated RIAT classes through some field observations and corroborated by recent seismicity reveal the recent activation of Yamuna tear faults in the basin with delineation of four RIAT classes such as class-1 (inactive 9.8% of the area), class-2 (low active; 16.40% of the area), class-3 (moderately active; 42.38% of the area) and class-4 (very active; 31.62%). The results suggest that the Himalayan frontal thrust (HFT) and Yamuna tear (YT) located in the basin is morphogenic in nature and got activated several times as evidenced by number of seismic activities in the basin and adjoining regions. The incision, and sharp turning of rivers, crenulations and warping of cross beddings/laminations and silt/clay beds and lenses, megascopic and mesoscopic faulting in sediment sequences suggest a very active nature of the HFT and YT till date in association with three prolific microseismogenic weak zones These active discontinuities appear to support the formation and development of different deformational features in sediment sequences which may be indirectly related to subduction and underthrusting of Indian plate under Eurasian plate below the Himalayan mountain chain.     

Arsenic in groundwater,Quaternary sediments,and suspended river sediments from the Middle Gangetic Plain,India: distribution,field relations,and geomorphological setting

A groundwater arsenic (As) survey in Mirzapur, Varanasi, Ghazipur, Ballia, Buxar, Ara, Patna, and Vaishali districts of UP and Bihar shows that people from these districts are drinking As-contaminated groundwater (max. 1,300 μg/l). About 66 % of tubewells from Buxar to Mirzapur areas and 89 % of tubewells from Patna to Ballia areas have As?>?10 μg/l (WHO guideline). Moreover, 36 % of tubewells from Buxar to Mirzapur areas and 50 % of tubewells from Patna to Ballia areas have As above 50 μg/l. Most of the As-affected villages are located close to abandoned or present meander channels of the Ganga River. In contrast, tubewells located in Mirzapur, Chunar, Varanasi, Saidpur, Ghazipur, Muhammadabad, Ballia, Buxar, Ara, Chhapra, Patna, and Hazipur towns are As-safe in groundwater because of their positions on the Pleistocene Older Alluvium upland surfaces. The iron (Fe) content in tubewell water samples varies from 0.1 to 12.93 mg/l. About 77 % As-contaminated tubewells are located within the depth of 21 to 40 m in the Holocene Newer Alluvium aquifers. The potential source of As in sediments carried through the rivers from the Himalayas. Maximum As concentrations in the Older and Newer Alluvium sediments are 13.73 and 30.91 mg/kg, respectively. The Himalayas rivers, i.e. Yamuna, Ganga, Gomati, Ghaghara, Gondak, Buri Gandak, and Kosi rivers carrying suspended sediments have high content of As (max. 10.59 mg/kg).