Origin of fine-grained carbonate and siliciclastic sediments in an Early Palaeozoic slope sequence, Cow Head Group, western Newfoundland

The Cow Head Group is an Early Palaeozoic base-of-slope sediment apron composed of carbonate and shale. Whereas coarse-grained conglomerate and calcarenite are readily interpreted as debris-flow and turbidite deposits, calcilutite (lime mudstone), calcisiltite, and shale combine to form three distinct lithofacies whose present attributes are a function of both sedimentation and early diagenesis. Shale is the most common lithology. Black, green, and red shale colour variations reflect the abundance of organic matter in the source area and oxygenation conditions of the sea bottom. In black and green shale, millimetre- to centimetre-thick, alternating dark and light laminations represent terrigenous mud turbidites and hemipelagites, respectively. The calcisiltite/shale facies is uncommon and is composed of numerous graded carbonate-shale sequences (GCSS) deposited from waning carbonate turbidites and fall-out of terrigenous muds. Some of the characteristics of ribbon and parted lime mudstones in the calcilutite/shale facies can be explained by deposition of carbonate mud from dilute turbidity currents or hemipelagic settling. Other features are diagenetic in origin. The lack of micrite in GCSS and in the interbedded shales of the calcilutite/shale facies is interpreted to reflect early dissolution of the finer carbonate from these sediments. This remobilized carbonate was precipitated locally to: lithify lime mudstone turbidites or hemipelagites; form diagenetic lime mudstone beds and nodules; cement calcisiltites; and form dolomite. Many of the calcisiltites and calcilutites were, therefore, carbonate enriched at the expense of adjacent argillaceous sediments. These attributes characterize not only fine-grained sediments of the Cow Head Group but many other Early Palaeozoic slope carbonates as well, suggesting that the model proposed here for depositionl diagenesis has wider application.     

The Hunghae Formation, SE Korea: Miocene debris aprons in a back-arc intraslope basin

ABSTRACT During early to middle Miocene times a sudden opening of the Ulleung (Tsushima) back-arc basin in the East Sea (Sea of Japan) led to the development of intraslope basins along the rifted southwestern margin (southeast Korea). Abrupt subsidence resulted in the deposition of the 200 m thick Hunghae Formation (middle Miocene), a sand/mudstone sequence that can be divided into five facies. Facies I (sand and mudstone couplet) and II (coarse sand) are turbiditic in origin, as evidenced by massive, graded, crudely-layered and parallel-laminated sand beds. Facies III (homogeneous mudstone) is characterized by various lignite and plant fragments, clastic and biogenic grains that are randomly oriented, suggestive of hemipelagic deposition. Facies IV (chaotic deposit) is characterized by the disruption of beds, the presence of isolated siltstone blocks (or balls) and large clasts in the muddy matrix, indicative of retrogressive rockfall and slide/slump. Facies V (conglomerate) is of debris flow origin, as evidenced by clast- and matrix-supported features, floating large clasts and absence of traction structures. Individual facies are organized into two types of facies association: (1) homogeneous mudstone (facies III) associated randomly with the rest (facies I, II, IV and V), indicative of hemipelagic and episodic sediment-gravity flow processes, respectively; (2) conglomerate (facies V), coarse sand (facies II) and sand/mudstone couplet (facies I), representing the flow transformation from debris flow to high- and low-concentration turbidity currents. These facies associations are similar in many respects to modern and ancient debris (or slope) aprons found elsewhere. Numerous isolated slide/slump blocks, wedged conglomerates with armoured mudstone balls, discontinuous lignite-containing sand/mudstone beds, chaotic structure and growth faults suggest that the deposition occurred on a steep slope (intraslope basin) off coalescing fan-deltas, mainly by unchannellized sediment-gravity flows. Ancient deposits with irregular facies sequences can be viewed as debris-apron systems, which provide alternatives to submarine-fan models in many clastic basins with a line rather than point source.     

Identification and micro‐stratigraphy of hyperpycnites and turbidites in Cretaceous Lewis Shale,Wyoming

Sandy hyperpycnal flows and their deposits, hyperpycnites, have been documented in modern environments and, more recently, in Cretaceous and Tertiary strata; they may be more common in the rock record, and within petroleum reservoirs, than has been previously thought. Muddy hyperpycnites also occur within the rock record, but these are more difficult to document because of their finer‐grained nature and lack of common sedimentary structures. This paper documents the presence of submarine slope mudstone and siltstone hyperpycnites (and muddy turbidites) in the delta‐fed, Upper Cretaceous Lewis Shale of Wyoming; based on field measurements, analyses of rock slabs and thin sections, and laser grain‐size distributions. Four lithofacies comprise laminated and thin‐bedded mudstones that are associated with levéed channel sandstones: (L1) grey, laminated, graded mudstone with thin siltstone and sandstone interbeds; (L2) dark grey to tan, laminated mudstone with very thin siltstone and sandstone stringers; (L3) light grey, laminated siltstones; and (L4) laminated mudstones and siltstones with thin sandstone interbeds. Two styles of mudstone grain‐size grading have been documented. The first type is an upward‐fining interval that typically ranges in thickness from 2·5 to 5 cm. The second type is a couplet of a lower, upward‐coarsening interval and an upper, upward‐fining interval (sometimes separated by a micro‐erosion surface) which, combined, are about 3·8 cm thick. Both individual laminae and groups of laminae spaced millimetres apart exhibit these two grain‐size trends. Although sedimentary structures indicative of traction‐plus‐fallout sedimentary processes associated with sandier hyperpycnites are generally absent in these muddy sediments, the size grading patterns are similar to those postulated in the literature for sandy hyperpycnites. Thus, the combined upward‐coarsening, then upward‐fining couplets are interpreted to be the result of a progressive increase in river discharge during waxing and peak flood stage (upward increase in grain‐size), followed by waning flow after the flood begins to abate (upward decrease in grain‐size). The micro‐erosion surface that sometimes divides the two parts of the size‐graded couplet resulted from waxing flows of sufficiently high velocity to erode the sediment previously deposited by the same flow. Individual laminae sets which only exhibit upward‐fining trends could be either the result of waning flow deposition from either dilute turbidity currents or from hyperpycnal flows. The occurrence of these sets with the size‐graded couplets suggests that they are associated with hyperpycnal processes.     

鄂尔多斯盆地南部三叠系延长组湖相重力流沉积细粒岩及其油气地质意义

随着页岩油气勘探开发和相关领域研究的不断深入,细粒沉积物的搬运和沉积已成为当前沉积学研究的热点问题之一,但中国中生代湖泊环境中的泥质重力流沉积尚未引起应有的关注。通过岩心观察、薄片鉴定等手段及综合研究,分析了鄂尔多斯盆地晚三叠世湖相泥质重力流沉积特征,探讨了其形成机制与成因分类。鄂尔多斯盆地三叠系延长组湖相泥页岩结构类型多样,发育泥质块体流沉积、泥质碎屑流沉积、泥质浊流沉积和泥质异重流沉积等多种重力流沉积类型。按照泥质含量将重力流划分为砂质重力流、泥质重力流和混合重力流3种亚类,并根据成因将重力流划分为滑塌体、碎屑流、浊流及异重流等4种亚类;结合成因和泥质含量,将重力流沉积共划分为12种类型。滑塌岩、碎屑岩分布于三角洲前缘斜坡脚附近;浊积岩、异重岩广泛分布于三角洲斜坡至沉积中心。认为泥质沉积物可以在强水动力条件下搬运-沉积;重力流沉积细粒物质在湖相沉积中占据很大的比例;泥质重力流对泥页岩中的碎屑物质、黏土矿物及有机质的搬运和沉积起到重要作用,因而对于页岩油气的生烃、储集性能和压裂工艺研究具有重要意义。     

Important geological properties of unconventional resource shales

The revelation of vast global quantities of potentially productive gas and oil-prone shales has led to advancements in understanding important geological properties which impact reservoir performance. Based upon research on a variety of shales, several geological properties have been recognized as being common and important to hydrocarbon production. (1) transport/depositional processes include hemipelagic ‘rain’, hyperpycnal flows, turbidity current flows, tempestites, wave-reworking, and contour currents in both shallow and deep water settings. (2) Common shale minerals include clays, quartz, calcite, dolomite, apatite, and pyrite; organic constituents include spores (Tasmanites), plant remains, biogenic quartz and calcite, and arenaceous foraminifera. (3) Porosity and permeability are characteristically low with pore sizes ranging down to the nanoscale. Main pore types include intergranular (including pores within clay floccules), porous organic matter, porous fecal pellets, and microfractures. (4) Important geochemical characteristics include organic richness (>3%), maturity (>1.1%Ro for shale gas and 0.6–0.9% for shale oil) and type (I–IV), in addition to certain biomarkers which are indicators of bottom water oxicity during deposition. Remaining hydrocarbon potential [RHP = (S1 + S2)/TOC] also reflects temporal environmental changes. ‘Isotopic reversals’ can be used to detect best producing areas in shale-gas plays. (5) Lithofacies stacking patterns and sequence stratigraphy are the result of eustatic depositional history. A general sequence stratigraphic model is presented here that highlights this commonality. (6) Geomechanical properties are key to drilling, fracturing and production of hydrocarbons. Brittle-ductile couplets at several scales occur in shale sequences. (7) Geophysical properties, when calibrated to rock properties, provide a means of regionally to locally mapping the aforementioned properties. (8) Economic and societal considerations in the exploration and development of resource shales are garnering attention. Many potentially economic shale-gas and shale-oil plays are being identified globally. Risks and uncertainties associated with gas- and oil-rich shales include the lack of long-term production histories, environmental concerns related to hydraulic fracturing, uncertainty in calculating hydrocarbons-in-place, and fluctuations in supply, demand, and price.     

Application of sequence stratigraphic concepts to the Upper Cretaceous Tununk Shale Member of the Mancos Shale Formation,south-central Utah: Parasequence styles in shelfal mudstone strata

Although sequence stratigraphic concepts have been applied extensively to coarse-grained siliciclastic deposits in nearshore environments, high-resolution sequence stratigraphic analysis has not been widely applied to mudstone-dominated sedimentary successions deposited in more distal hemipelagic to pelagic settings. To examine how sequence stratigraphic frameworks can be derived from the facies variability of mudstone-dominated successions, the Tununk Shale Member of the Mancos Shale Formation in south-central Utah (USA) was examined in detail through a combination of sedimentological, stratigraphic and petrographic methods. The Tununk Shale accumulated on a storm-dominated shelf during the second-order Greenhorn sea-level cycle. During this eustatic event, the depositional environment of the Tununk Shale shifted laterally from distal middle shelf to outer shelf, then from an outer shelf to an inner shelf environment. At least 49 parasequences can be identified within the Tununk Shale. Each parasequence shows a coarsening-upward trend via upward increases in silt and sand content, thickness and lateral continuity of laminae/beds, and abundance of storm-generated sedimentary structures. Variations in bioturbation styles within parasequences are complex, although abrupt changes in bioturbation intensity or diversity commonly occur across parasequence boundaries (i.e. flooding surfaces). Due to changes in depositional environments, dominant sediment supply and bioturbation characteristics, parasequence styles in the Tununk Shale show considerable variability. Based on parasequence stacking patterns, eleven system tracts, four depositional sequences and key sequence stratigraphic surfaces can be identified. The high-resolution sequence stratigraphic framework of the Tununk Shale reveals a hierarchy of stratal cyclicity. Application of sequence stratigraphic concepts to this thick mudstone-dominated succession provides important insights into the underlying causes of heterogeneity in these rocks over multiple thickness scales (millimetre-scale to metre-scale). The detailed sedimentological characterization of parasequences, system tracts and depositional sequences in the Tununk Shale provides conceptual approaches that can aid the development of high-resolution sequence stratigraphic frameworks in other ancient shelf mudstone successions.     

Sea level controls on the textural characteristics and depositional architecture of the Hueneme and associated submarine fan systems, Santa Monica Basin, California

Hueneme and Dume submarine fans in Santa Monica Basin consist of sandy channel and muddy levee facies on the upper fan, lenticular sand sheets on the middle fan, and thinly bedded turbidite and hemipelagic facies elsewhere. Fifteen widely correlatable key seismic reflections in high-resolution airgun and deep-towed boomer profiles subdivide the fan and basin deposits into time-slices that show different thickness and seismic-facies distributions, inferred to result from changes in Quaternary sea level and sediment supply. At times of low sea level, highly efficient turbidity currents generated by hyperpycnal flows or sediment failures at river deltas carry sand well out onto the middle-fan area. Thick, muddy flows formed rapidly prograding high levees mainly on the western (right-hand) side of three valleys that fed Hueneme fan at different times; the most recently active of the lowstand fan valleys, Hueneme fan valley, now heads in Hueneme Canyon. At times of high sea level, fans receive sand from submarine canyons that intercept littoral-drift cells and mixed sediment from earthquake-triggered slumps. Turbidity currents are confined to ‘underfit’ talweg channels in fan valleys and to steep, small, basin-margin fans like Dume fan. Mud is effectively separated from sand at high sea level and moves basinward across the shelf in plumes and in storm-generated lutite flows, contributing to a basin-floor blanket that is locally thicker than contemporary fan deposits and that onlaps older fans at the basin margin. The infilling of Santa Monica Basin has involved both fan and basin-floor aggradation accompanied by landward and basinward facies shifts. Progradation was restricted to the downslope growth of high muddy levees and the periodic basinward advance of the toe of the steeper and sandier Dume fan. Although the region is tectonically active, major sedimentation changes can be related to eustatic sea-level changes. The primary controls on facies shifts and fan growth appear to be an interplay of texture of source sediment, the efficiency with which turbidity currents transport sand, and the effects of delta distributary switching, all of which reflect sea-level changes.     

海相泥页岩沉积过程研究进展

随着全球页岩油气勘探开发的不断深入,海相泥页岩作为非常规油气沉积学的重要研究对象之一,其沉积特征及沉积过程日益引起学者们的关注,并在岩相分类、沉积过程解释及层序地层划分方面取得了显著进展.海相泥页岩的岩相划分已达到厘米—毫米尺度,其命名原则主要考虑结构(粒度)、层理及矿物成分等特征,结构方面着重参考砂级、粗泥级和细泥级...     

泥质重力流沉积研究进展及其页岩油气地质意义--以东营凹陷古近系沙河街组三段为例

页岩油气的勘探开发推动了泥页岩沉积机理研究的快速发展,使得细粒物质的搬运和沉积成为当今沉积学界和油气工业界共同关注的焦点。尽管海洋环境下的泥质重力流沉积研究成果频见报道,但有关我国新生代湖泊环境中的泥质重力流沉积尚未引起沉积学界的关注。故本文在国内外相关文献调研基础上,以岩芯观察和薄片鉴定为重点,分析了渤海湾盆地东营凹陷古近系沙河街组三段湖相泥质重力流沉积特征;探讨了湖相泥质重力流沉积的形成机制;以期为湖泊沉积学研究和陆相页岩油气开发提供参考。研究发现,东营凹陷古近系沙河街组三段发育泥质块体流、泥质碎屑流、泥质浊流及泥质异重流等多种重力流沉积类型;泥质滑塌岩、泥质碎屑岩、泥质浊积岩和泥质异重岩在时空上可以共生共存。认为泥质沉积物可以在动荡水体和较强水动力条件下沉淀;泥质重力流沉积在深水沉积区占有重要地位;泥质重力流对于泥页岩中的粗粒碎屑物质、有机质的搬运和沉积以及有机质的埋藏起到重要作用,因而具有重要的非常规油气地质意义。     

Evaluating along‐strike variation using thin‐bedded facies analysis,Upper Cretaceous Ferron Notom Delta,Utah

Thin‐bedded delta‐front and prodelta facies of the Upper Cretaceous Ferron Notom Delta Complex near Hanksville in southern Utah, USA, show significant along‐strike facies variability. Primary initiation processes that form these thin beds include surge‐type turbidity currents, hyperpycnal flows and storm surges. The relative proportion of sedimentary structures generated by each of these depositional processes/events has been calculated from a series of measured sedimentological sections within a single parasequence (PS6–1) which is exposed continuously along depositional strike. For each measured section, sedimentological data including grain size, lithology, bedding thickness, sedimentary structures and ichnological suites have been documented. Parasequence 6–1 shows a strong along‐strike variation with a wave‐dominated environment in the north, passing abruptly into a fluvial‐dominated area, then to an environment with varying degrees of fluvial and wave influence southward, and back to a wave‐dominated environment further to the south‐east. The lateral facies variations integrated with palaeocurrent data indicate that parasequence 6–1 is deposited as a storm‐dominated symmetrical delta with a large river‐dominated bayhead system linked to an updip fluvial feeder valley. This article indicates that it is practical to quantify the relative importance of depositional processes and determine the along‐strike variation within an ancient delta system using thin‐bedded facies analysis. The wide range of vertical stratification and grading sequences present in these event beds also allows construction of conceptual models of deposition from turbidity currents (i.e. surge‐type turbidity currents and hyperpycnal flows) and storm surges, and shows that there are significant interactions and linkages of these often paired processes.     

The lower Devonian Kowmung volcaniclastics: A deep‐water succession of mass‐flow origin,northeastern Lachlan Fold Belt,N.S.W.

The Lower to ?Middle Devonian Kowmung Volcaniclastics form the upper part of a succession of Upper Siluran to mid‐Devonian flyschoid rocks in the Yerranderie area of N.S.W., and contain two major facies associations. (1) A mudstone facies association represents the ambient, background sedimentation, comprising predominantly buff mudstone that is host to an assemblage of coarser‐grained sediments, including graded‐bedded to massive siltstone, sandstone, conglomerate, allodapic limestone, and large allochthonous limestone blocks and associated limestone breccia. Bouma sequences are common, sole structures occur and maximum bed thickness is about 3 m. (2) A volcaniclastic facies association intrudes and interrupts the accumulation of the ambient mudstone facies association, and contains massive to partly graded, quartzofeldspathic siltstone, sandstone, breccia and conglomerate. Sedimentation units in the volcaniclastic facies association are up to 120 m thick. The two facies associations interfinger. Stratigraphically, the base of the Kowmung Volcaniclastics is taken as the first sedimentation unit of the volcaniclastic facies association. The mudstone facies association below this level is part of the Siluro‐Devonian Taralga Group.

Both facies associations were deposited in relatively deep‐water. The dominant transport process in both associations was mass‐flow, involving granular mass‐flows (turbidity currents, grain flows), debris flows and avalanches. Massive mudstone is hemipelagic in origin. The volcaniclastic facies association probably represents a submarine volcanic apron around the emergent, volcanic Bindook Complex. Grossly, the succession coarsens upwards, and there is evidence of several sources of sediment, rather than a single point at the head of a submarine fan.

Provenance is diverse. In the mudstone facies association, framework grains in sandstone are microlitic volcanic‐rock fragments with a mafic to intermediate volcanic source. Clasts in conglomerate and breccia are consistent with derivation from the regionally extensive, quartzose Ordovician flyschoid successions. Clasts of ?penecontemporaneous limestone also occur. The volcaniclastic facies association was probably derived largely from the nearby, coeval Bindook Complex, which consists of silicic ash‐flow and ash‐fall tuff, lava, associated sediment and granitoids. Detritus was either derived directly from volcanic eruptions or was worked in fringing littoral and fluvial environments prior to redeposition by mass‐flow. Quartzite boulders mixed with volcanic clasts in the conglomerate suggest that Ordovician quartzarenite was also exposed around the volcanic complex. Tentative provenance correlations have been made between the different rock units in the Kowmung Volcaniclastics and their possible sources in the northern part of the Bindook Complex.     

Ichnology of prodeltaic hyperpycnite–turbidite channel complexes and lobes from the Upper Cretaceous Prairie Canyon Member of the Mancos Shale,Book Cliffs,Utah, USA

The Upper Cretaceous Prairie Canyon Member of the Mancos Shale, Book Cliffs, Utah, contain outstanding examples of prodeltaic turbidity and hyperpycnal flow deposits. Sandstone‐rich, heterolithic and mudstone‐rich channel fills occur near the north‐west entrance to Tusher Canyon, Gunnison Butte and Bootlegger Wash. Mudstone‐rich and heterolithic‐rich hyperpycnal channel deposits are mostly unbioturbated, locally displaying a few specimens of Phycosiphon incertum, Protovirgularia dichotoma, Rosselia socialis, Schaubcylindrichnus coronus and Palaeophycus tubularis. Sandstone‐rich channel deposits consist of wave‐reworked turbidites and hyperpycnites, containing Helminthoidichnites tenuis, Lockeia siliquaria, Phycodes isp., Phycosiphon incertum, Protovirgularia dichotoma, Rosselia socialis, Skolithos linearis and Fugichnia. Scolicia isp. and Chondrites isp. occur locally. Strata along the south‐west entrance of Tusher Canyon record deposition in a prodelta turbidite lobe, but far from its axis. With the exception of a few specimens of Ophiomorpha isp., bioturbation is restricted to the top of the succession, where Curvolithus simplex, Gyrochorte comosa, Lockeia siliquaria, Palaeophycus tubularis and Ptychoplasma excelsum occur. Strata at Hatch Mesa record deposition in a hyperpycnal lobe, near to its axis. Sandstone beds include Curvolithus simplex, Gyrochorte comosa, Ophiomorpha nodosa, Palaeophycus tubularis, Phycosiphon incertum, Protovirgularia dichotoma, Ptychoplasma excelsum, Schaubcylindrichnus freyi, Skolithos linearis, large specimens of Rosselia socialis and indeterminate crustacean burrows. Chondrites isp. is present in the mudstone. High rates of both episodic and sustained sedimentation, degree of substrate consolidation, freshwater discharge and water turbidity are the most important stress factors in both channels and lobes. Taxonomic composition, uneven distribution of bioturbation through the successions, and overall low ichnodiversity help to distinguish these prodeltaic deposits from bathymetrically equivalent offshore strata in the same basin. Hyperpycnal flow deposits are formed in a wide variety of environmental settings, therefore displaying high ichnological variability. Such variability is summarized by characterising ichnofaunas from four different depositional settings: (i) lakes; (ii) shelf deltas; (iii) shelf‐edge deltas; and (iv) deep‐marine systems.     

Cambrian- Ordovician Deep - Water Deposits in Southwest Jiangxi, China

The Cambrian-Ordovician rocks in southwestern Jiangxi are mainly composed of deep-water deposits, in which 5 facies have been recognized: sandstone facies, sandstone-mudstone facies, siltstone-mudstone facies, mudstone (slate)facies, and chert facies. They are of turbidity current origin and are related to pelagic and hemipelagic deposits. In the light of facies distribution, the Cambrian-Ordovician deposits can be classified into 3 facies associations formed in middle fan, outer fan and deep-sea plain environments respectively. The 3 different orders of vertical cycles in the stratigraphic sequence are considered to be controlled by factors such as sea-level fluctuation, basin subsidence and submarine fan progradation. The tectonic setting of the sedimentary basin is interpreted as passive continental margin based on the chemical composition analysis of the sandstone.     

The hyperpycnite problem

Sedimentologic, oceanographic, and hydraulic engineering publications on hyperpycnal flows claim that(1) river flows transform into turbidity currents at plunge points near the shoreline,(2) hyperpycnal flows have the power to erode the seafloor and cause submarine canyons, and,(3) hyperpycnal flows are efficient in transporting sand across the shelf and can deliver sediments into the deep sea for developing submarine fans. Importantly, these claims do have economic implications for the petroleum industry for predicting sandy reservoirs in deep-water petroleum exploration. However, these claims are based strictly on experimental or theoretical basis, without the supporting empirical data from modern depositional systems. Therefore, the primary purpose of this article is to rigorously evaluate the merits of these claims.A global evaluation of density plumes, based on 26 case studies(e.g., Yellow River, Yangtze River, Copper River,Hugli River(Ganges), Guadalquivir River, Rio de la Plata Estuary, Zambezi River, among others); suggests a complex variability in nature. Real-world examples show that density plumes(1) occur in six different environments(i.e., marine,lacustrine, estuarine, lagoon, bay, and reef);(2) are composed of six different compositional materials(e.g., siliciclastic,calciclastic, planktonic, etc.);(3) derive material from 11 different sources(e.g., river flood, tidal estuary, subglacial, etc.);(4) are subjected to 15 different external controls(e.g., tidal shear fronts, ocean currents, cyclones, tsunamis, etc.); and,(5) exhibit 24 configurations(e.g., lobate, coalescing, linear, swirly, U-Turn, anastomosing, etc.).Major problem areas are:(1) There are at least 16 types of hyperpycnal flows(e.g., density flow, underflow, high-density hyperpycnal plume, high-turbid mass flow, tide-modulated hyperpycnal flow, cyclone-induced hyperpycnal turbidity current, multi-layer hyperpycnal flows, etc.), without an underpinning principle of fluid dynamics.(2) The basic tenet that river currents transform into turbidity currents at plunge points near the shoreline is based on an experiment that used fresh tap water as a standing body. In attempting to understand all density plumes, such an experimental result is inapplicable to marine waters(sea or ocean) with a higher density due to salt content.(3) Published velocity measurements from the Yellow River mouth, a classic area, are of tidal currents, not of hyperpycnal flows. Importantly, the presence of tidal shear front at the Yellow River mouth limits seaward transport of sediments.(4) Despite its popularity, the hyperpycnite facies model has not been validated by laboratory experiments or by real-world empirical field data from modern settings.(5) The presence of an erosional surface within a single hyperpycnite depositional unit is antithetical to the basic principles of stratigraphy.(6) The hypothetical model of "extrabasinal turbidites", deposited by river-flood triggered hyperpycnal flows,is untenable. This is because high-density turbidity currents, which serve as the conceptual basis for the model, have never been documented in the world's oceans.(7) Although plant remains are considered a criterion for recognizing hyperpycnites, the "Type 1" shelf-incising canyons having heads with connection to a major river or estuarine system could serve as a conduit for transporting plant remains by other processes, such as tidal currents.(8) Genuine hyperpycnal flows are feeble and muddy by nature, and they are confined to the inner shelf in modern settings.(9) Distinguishing criteria of ancient hyperpycnites from turbidites or contourites are muddled.(10) After 65 years of research since Bates(AAPG Bulletin 37: 2119-2162, 1953), our understanding of hyperpycnal flows and their deposits is still incomplete and without clarity.     

Intra-clinothem variability in sedimentary texture and process regime recorded down slope profiles

Shelf-margin clinothem successions can archive process interactions at the shelf to slope transition, and their architecture provides constraints on the interplay of factors that control basin-margin evolution. However, detailed textural analysis and facies distributions from shelf to slope transitions remain poorly documented. This study uses quantitative grain-size and sorting data from coeval shelf and slope deposits of a single clinothem that crops out along a 5 km long, dip-parallel transect of the Eocene Sobrarbe Deltaic Complex (Ainsa Basin, south-central Pyrenees, Spain). Systematic sampling of sandstone beds tied to measured sections has captured vertical and basinward changes in sedimentary texture and facies distributions at an intra-clinothem scale. Two types of hyperpycnal flow-related slope deposits, both rich in mica and terrestrial organic matter, are differentiated according to grain size, sorting and bed geometry: (i) sustained hyperpycnal flow deposits, which are physically linked to coarse channelized sediments in the shelf setting and which deposit sand down the complete slope profile; (ii) episodic hyperpycnal flow deposits, which are disconnected from, and incise into, shelf sands and which are associated with sediment bypass of the proximal slope and coarse-grained sand deposition on the medial and distal slope. Both types of hyperpycnites are interbedded with relatively homogenous, organic-free and mica-free, well-sorted, very fine-grained sandstones, which are interpreted to be remobilized from wave-dominated shelf environments; these wave-dominated deposits are found only on the proximal and medial slope. Coarse-grained sediment bypass into the deeper-water slope settings is therefore dominated by episodic hyperpycnal flows, whilst sustained hyperpycnal flows and turbidity currents remobilizing wave-dominated shelf deposits are responsible for the full range of grain sizes in the proximal and medial slope, thus facilitating clinoform progradation. This novel dataset highlights previously undocumented intra-clinothem variability related to updip changes in the shelf process-regime, which is therefore a key factor controlling downdip architecture and resulting sedimentary texture.     

鄂尔多斯晚三叠世湖盆异重流沉积新发现

水下重力流沉积作为重要的油气储层,已成为当前学术研究和油气工业共同关注的焦点.在鄂尔多斯盆地南部延长组长7~长6油层组深湖相沉积中,发现一种不同于砂质碎屑流沉积和滑塌浊积岩的重力流成因砂岩.其沉积特征为一系列向上变粗的单元(逆粒序层)和向上变细的单元(正粒序层)成对出现;每一个粒序层组合内部的泥质含量变化(高-低-高)与粒度变化一致;上部正粒序层与下部逆粒序层之间可见层内微侵蚀界面;砂岩与灰黑色纯泥岩、深灰色粉砂质泥岩互层;粉砂质泥岩层内也表现出类似的粒度变化特征.通过岩芯观察和薄片鉴定,认为该岩石组合形成于晚三叠世深湖背景下的异重流(hyperpycnal flow)沉积.其沉积产物--hyperpycnite(异重岩?)以发育逆粒序和层内微侵蚀面而区别于其它浊积岩,逆粒序代表洪水增强期的产物,上部的正粒序层为洪水衰退期的沉积,逆粒序-正粒序的成对出现代表一次洪水异重流事件沉积旋回;层内微侵蚀面是洪峰期流速足以对同期先沉淀的逆粒序沉积层侵蚀造成的.鄂尔多斯盆地延长组异重岩的发现,不仅为探索陆相湖盆环境下的异重流沉积提供了一个范例,而且对于深水砂体成因研究、储层预测和油气勘探具有理论和现实意义.     

Turbidite deposition in the Cambrian Kanmantoo Group,South Australia

The Kanmantoo Group of South Australia is a thick (～7–8 km) succession of predominantly clastic marine sedimentary and metasedimentary rocks that were deposited very rapidly in a localised basin (Kanmantoo Trough) during the Early Cambrian. Despite structural complexity and varying grades of metamorphism, a surprising amount of primary sedimentological information is still available. Although a variety of depositional facies are represented, the group is dominated by parallel, sharp‐based, mineralogically immature sandstone interbedded with mudstone. The sandstone beds are most commonly fine to medium grained, massive and lacking in obvious grading except at the top. Single beds often reach several metres in thickness and amalgamation of beds is not uncommon. We argue that these sandstone beds could be the products of sustained high‐density turbidity currents. Triggering mechanisms for such turbidity currents remain uncertain, but they may have been initiated as hyperpycnal flows during catastrophic flood events at the mouths of high‐load‐capacity rivers, or from the failure of unstable buildups of sediment on delta slopes. Palaeocurrent studies from sole marks suggest a southerly source, which was probably an active orogenic terrain in formerly contiguous Antarctica. It is likely that a major delta complex lay at the southern end of the basin.     

Status and Trends in Research on Deep-Water Gravity Flow Deposits

Deep-water gravity flows are one of the most important sediment transport mechanisms on Earth. After 60 years of study,significant achievements have been made in terms of classification schemes,genetic mechanisms,and depositional models of deep-water gravity flows. The research history of deep-water gravity flows can be divided into five stages: incipience of turbidity current theory; formation of turbidity current theory; development of deep-water gravity flow theory; improvement and perfection of deep-water gravity flow theory; and comprehensive development of deep-water gravity flow theory. Currently,three primary classification schemes based on the sediment support mechanism,the rheology and transportation process,and the integration of sediment support mechanisms,rheology,sedimentary characteristics,and flow state are commonly used.Different types of deep-water gravity flow events form different types of gravity flow deposits. Sediment slump retransportation mainly forms muddy debris flows,sandy debris flows,and surge-like turbidity currents. Resuspension of deposits by storms leads to quasi-steady hyperpycnal turbidity currents(hyperpycnal flows). Sustainable sediment supplies mainly generate muddy debris flows,sandy debris flows,and hyperpycnal flows. Deep-water fans,which are commonly controlled by debris flows and hyperpycnal flows,are triggered by sustainable sediment supply; in contrast,deep-water slope sedimentary deposits consist mainly of debris flows that are triggered by the retransportation of sediment slumps and deep-water fine-grained sedimentary deposits are derived primarily from finegrained hyperpycnal flows that are triggered by the resuspension of storm deposits. Harmonization of classification schemes,transformation between different types of gravity flow deposit,and monitoring and reproduction of the sedimentary processes of deep-water gravity flows as well as a source-to-sink approach to document the evolution and deposition of deep-water gravity flows are the most important research aspects for future studies of deep-water gravity flows study in the future.     

Stratigraphical architecture at the muddy margin of the Cretaceous Western Interior Seaway, southern Utah

The Tropic Shale and correlative Tununk Shale Member of the Mancos Shale accumulated during Cenomanian-Turonian time, within prodeltaic environments near the western margin of the Western Interior Seaway of North America. Stratigraphical and sedimentological analysis has revealed a detailed history of relative sea level change in the thick, fine grained succession. The Tropic and Tununk shales were deposited during the Greenhorn second-order sea level cycle, over a time span of about 2–5 million years. In southern Utah, six depositional sequences are superposed upon the record of this long term sea level change. The sequences developed during third-order relative sea level cycles of hundreds of thousands of years duration and are composed of at least 37 parasequences, arranged in retrogradational, aggradational and progradational parasequence sets. The Tropic Shale and Tununk Shale Member accumulated just basinward of the axis of maximum subsidence of a foreland basin. Stratal geometries and facies distribution patterns in the succession indicate that in southern Utah the Greenhorn cycle was tectonically controlled. During the Greenhorn transgression and highstand, rapid rates of tectonic subsidence trapped terrigenous sediment to the west of the study area, in the more proximal foreland. At this time, hemipelagic facies accumulated at relatively slow rates in southern Utah and type 2 sequences developed during third-order sea level cycles. In contrast, during the Greenhorn regression rates of thrust-induced subsidence in the proximal foreland basin evidently slowed, and deltaic clinoforms prograded across the study area. At least one forced regression occurred in southern Utah at this time, and type 1 sequences developed. The formation of type 1 sequence boundaries in the upper part of the Tropic Shale and Tununk Shale Member points to episodes of base level fall and indicates that the six third-order sea level cycles recorded in the succession were not the result of changes in sediment supply alone. The third-order cycles may have been a consequence of episodic tectonism. The timing of these cycles, however, suggests that development of sequences and parasequences in the Tropic Shale and Tununk Shale Member may have been related to orbital forcing in the Milankovitch band. Glacioeustasy or climatically related fluctuations in the amount of groundwater stored on continents may explain these high frequency sea level changes.