首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献,搜索用时 62 毫秒
1.
吉林通化集安地区发现了储量较大的蛇纹石质玉石矿床.X射线荧光光谱分析(XRF)显示蛇纹石质玉石中Si O2含量为35.21%~37.18%,Mg O 46.94%~49.72%,Fe O/Fe2O3之比在0.174~0.685之间.XRD分析显示在0.733 nm、0.366 nm和0.250 nm处存在有利蛇纹石的特征衍射峰.集安蛇纹石质玉主要矿物为利蛇纹石,并常含有镁橄榄石.红外光谱显示在3 650~3 700 cm-1、950~1 100 cm-1、400~700 cm-1存在有特征的利蛇纹石吸收峰.本玉石矿床属区域变质型蛇纹石矿床,利蛇纹石应为橄榄石在低温条件下水热蚀变的产物.  相似文献   

2.
对内蒙古贺根山蛇绿岩带内3个采样点的蛇纹岩样品开展了主量、微量元素和H-O-B同位素分析,以揭示其构造属性、蛇纹石化温度和流体来源。贺根山蛇纹岩具有低Al_2O_3含量(0.2%~1.3%)、高Mg~#(89~92)特征,为难熔地幔残余。蛇纹岩的U型稀土元素配分模式、相对富集LILE和亏损HFSE的微量元素地球化学特点,反映其原岩为化学成分高度亏损的俯冲带型(SSZ)超基性岩。样品的dD值相对均一(dD=-120‰~-133‰);理论计算显示,这些蛇纹岩的H同位素组成可能是蛇绿岩剥露地表后与区域大气降水发生再平衡作用的结果。贺根山蛇纹岩的d~(18)O变化在4.3‰~9.8‰之间,反映不同地点蛇纹石化的温度存在差别:其中贺根山东样品具有相对较高的d~(18)O值(d~(18)O=7.7‰~9.8‰),蛇纹石化温度为90~130℃,同时部分样品中出现碳酸盐矿物,表明蛇纹石化作用发生在近海底环境;小坝梁样品具有最低的d~(18)O值(d~(18)O=4.3‰~5.0‰),其蛇纹石化温度在205~235℃之间;贺根山南样品的d~(18)O值变化范围较大(d~(18)O=6.0‰~9.7‰),其蛇纹石化温度在90~170℃之间。3个采样点蛇纹岩的d~(11)B值也显示出一定的变化(d~(11)B=9.1‰~14.7‰),指示蛇纹石化流体来源于脱水的蚀变洋壳和海底沉积物;理论模拟和计算结果显示,这些板片流体的d~(11)B值变化在15‰~25‰之间。  相似文献   

3.
以活性MgO和纳米SiO2为原料,在仿地质作用的碱性水热环境下控制不同反应参数合成了多个系列的纤蛇纹石样品。利用XRD和IR分析系统地研究了不同反应参数对纤蛇纹石特征的影响。结果表明,活性MgO和纳米SiO2在水热环境中很容易转变成纤蛇纹石相,但形成完善纳米管结构须严格控制水热反应条件;pH值、反应温度和反应时间的提高均有利于水热合成结晶度及管状结构更加完善的纤蛇纹石,最佳水热反应条件为pH=13.8,200℃,反应60h,此条件下无其它杂质产物生成,合成温度较前人采用的300℃有所降低。利用SEM和AFM对最佳反应条件下合成的纤蛇纹石纳米管的形貌进行了观察,发现其为短柱状,准直性较高,表面光洁无杂质,直径均一,约50nm,长度多为400~500nm。  相似文献   

4.
榆树沟铂(族)元素矿床位于塔里木板块东北边缘,主要含矿岩石为蛇纹石化橄榄岩;目前矿区共发现4条铂矿化蚀变带,圈定8条铂矿体,矿体长度一般为100~500m,宽度为1~4m,矿体平均品位0.21×10-6~1.05×10-6.初步研究认为,矿区超基性岩为成矿母岩,矿区TiO2、FeO含量相对低,M/F值在2.85~7.4之间,而且矿区具有MgO低、Fe2O3较高的特点,该岩体为有利成矿(PGE)的岩体,而且矿区地质、岩石化学成分、围岩蚀变等特征与金川铂族元素矿床较为相似,找矿潜力较大.  相似文献   

5.
黄伯钧  闵育顺 《矿物学报》1989,9(3):202-210
四川石棉矿产出四种蛇纹石矿物:纤蛇纹石,Povlen型纤蛇纹石、利蛇纹石和叶蛇纹石。它们的形态、结构、化学成分和红外光谱各具特征,本文对此进行了描述和讨论。纤蛇纹石以纵纤维脉和横纤维脉形式产出,以斜纤蛇纹石为主,含少量正纤和副纤蛇纹石。纵纤维蛇纹石可能由地壳浅层中的大气热水形成。Povlen型纤蛇纹石是蛇纹石族矿物的一个新变种,其形态、结构和化学成分都不同于其他蛇纹石矿物。  相似文献   

6.
采用Fourier变换红外吸收光谱和X射线粉晶衍射技术对四川石棉县蛇纹石猫眼进行了研究。红外吸收光谱结果表明:四川蛇纹石猫眼可分为纤蛇纹石和叶蛇纹石两种类型,两者在(960-1100)cm-1和(3600-3690)cm-1的范围内由Si-O伸缩振动的E1类振动和OH伸缩振动表现出的红外谱带分裂强度及谱带特征存在明显的差异。在(960- 1100)cm-1间:纤蛇蚊石的红外光谱分裂成三个明显的谱带,而叶蛇纹石在此区间只有两条谱带。在570cm-1附近的红外谱带以肩状出现;OH伸缩振动区:纤蛇蚊石出现两条红外谱带,而叶蛇蚊石只出现一条红外谱带。X射线粉晶衍射结果表明:叶蛇蚊石具有d202=0.2522nm(I/I0=19)和d203=0.2430nm(I/I0=18)的特征谱线,而纤蛇纹石则具有d202、006=0.2446nm(I/I0=29)的特征谱线,d020>0.245nm近0.249 nm的特征谱线缺失。  相似文献   

7.
李发桥  唐菊兴  宋扬  林军  林彬  杨欢欢  唐攀  郑明  郭朵朵 《地质论评》2023,69(6):2023060021-2023060021
拿若矿床目前是藏西北阿里地区改则县多龙矿集区第三大斑岩铜(金)矿床,前人开展了系统的成岩成矿年代学、成矿地质背景等研究,但空间蚀变分带和岩浆演化过程等方面研究较为薄弱。本文以拿若矿床磷灰石作为研究对象,在大量钻孔科研编录的基础上,开展了磷灰石矿物学和矿物化学研究,探讨拿若矿床磷灰石矿物彩色阴极发光特征与蚀变分带的耦合关系,揭示含矿岩浆演化期次及氧化还原状态。磷灰石彩色阴极发光特征显示,拿若矿床磷灰石彩色阴极发光(CL)特征主要表现为黄褐色、绿色—亮黄色和灰黑色,分别对应未蚀变、钾化蚀变和绢英岩化蚀变环境,磷灰石彩色CL特征与其所处蚀变环境的关系验证了本文重新厘定的拿若矿床斑岩系统“双钾化带”空间蚀变分带结构。磷灰石电子探针(EPMA)主量元素测试结果显示,磷灰石的CaO = 53. 5%~56. 5%,P2O5 = 39. 5%~42%,F = 1. 26%~3. 24%,Cl = 0. 01%~1. 99%,SO3 = 0~1. 28%,由此计算的XF= 0. 68~1. 76,XCl = 0. 001~0. 58,XOH = 0. 21~1. 05。不同类型、阶段的磷灰石挥发分(F、Cl、OH)、SO3等变化趋势反映了拿若矿床岩浆—热液演化过程发生了气体饱和流体出溶金属沉淀的过程,并揭示了成矿岩浆高氧逸度的性质。此外,环带状岩浆磷灰石反映了隐爆角砾岩系统发育了三期次岩浆作用,并指示了第I、III期岩浆活动具有更高氧逸度特征,与成矿关系更加密切。因此,本文认为在复杂造山带发育的多期次岩浆热液叠加型斑岩铜矿床中,磷灰石在辅助厘定蚀变类型和反演岩浆—热液演化过程中具有重要的价值。  相似文献   

8.
拿若矿床目前是藏西北改则县多龙矿集区第三大斑岩型铜(金)矿床,前人开展了系统的成岩成矿年代学、成矿地质背景等研究,但空间蚀变分带和岩浆演化过程等方面研究较为薄弱。笔者等以拿若矿床磷灰石作为研究对象,在大量钻孔科研编录的基础上,开展了磷灰石矿物学和矿物化学研究,探讨拿若矿床磷灰石矿物彩色阴极发光特征与蚀变分带的耦合关系,揭示含矿岩浆演化期次及氧化还原状态。磷灰石彩色阴极发光特征显示,拿若矿床磷灰石彩色阴极发光(CL)特征主要表现为黄褐色、绿色—亮黄色和灰黑色,分别对应未蚀变、钾化蚀变和绢英岩化蚀变环境,磷灰石彩色CL特征与其所处蚀变环境的关系验证了笔者等重新厘定的拿若矿床斑岩系统“双钾化带”空间蚀变分带结构。磷灰石电子探针(EPMA)主量元素测试结果显示,磷灰石的CaO = 53. 5%~56. 5%,P2O5 = 39. 5%~42%,F = 1. 26%~3. 24%,Cl = 0. 01%~1. 99%,SO3 = 0~1. 28%,由此计算的XF = 0. 68~1. 76,XCl = 0. 001~0. 58,XOH = 0. 21~1. 05。不同类型、阶段的磷灰石挥发分(F、Cl、OH)、SO3等成分含量变化趋势反映了拿若矿床岩浆—热液演化过程发生了气体饱和流体出溶金属沉淀的过程,并揭示了成矿岩浆高氧逸度的性质。此外,环带状岩浆磷灰石反映了隐爆角砾岩系统发育了三期次岩浆作用,并指示了第I、III期岩浆活动具有更高氧逸度特征,与成矿关系更加密切。因此,笔者等认为在多期次岩浆热液叠加型斑岩铜矿床中,磷灰石在辅助厘定蚀变类型和反演岩浆—热液演化过程中具有重要的价值。  相似文献   

9.
碱度对水热合成纤蛇纹石纳米管的影响研究   总被引:1,自引:0,他引:1  
为克服天然纤蛇纹石纳米管在量子组装应用上存在的不易提纯、易被伴生矿物堵塞、管径不均等缺点,以活性MgO和纳米SiO2为原料,采用水热法在不同碱度下合成了系列纤蛇纹石样品.时合成样品的X射线衍射(XRD)、傅立叶红外光谱(FTIR)以及扫描电镜(SEM)分析表明,在200℃.pH值大于13的条件下反应60 h以上能够合成结晶度比较完善的纤蛇纹石;碱度的提高有利于纤蛇纹石氢氧镁石层和硅氧四面体层的生长,并促使两者结合更为紧密,晶胞参数b0值增大,结构层更易卷曲,纤蛇纹石的纤维管状结构更加完善,结晶度提高,纤维的晶体轮廓更加清晰,直径更为均一,长度增加;最后确认在200℃.pH 13.8,反应60 h条件下合成纤蛇纹石纳米管的直径约50 nm.长度多在600nm以上,长度上优于前人的合成.  相似文献   

10.
安徽马头钼铜矿是长江中下游成矿带中斑岩型矿床的典型代表,矿床在空间上划分出了3个不同的蚀变分带,即钾长石化带、石英-绢云母化带和青磐岩化带.本文对该矿床不同蚀变带内的常量元素迁移规律和稀土元素特征进行了探讨:①常量元素的迁移规律明显,从钾长石化带和石英-绢云母化带到青磐岩化带,均为带入的主要成分有K2O、CaO、Fe2O3、SiO2、H2O+,说明引起蚀变的流体中富含K2O、CaO等;而Na2O、FeO、MnO等成分的明显带出,说明矿化蚀变作用导致Na2O、FeO等成分向矿体迁移方向流失,其中Na2O的贫化最明显,与成矿元素Mo、Cu呈显著的负相关.②马头钼铜矿床花岗闪长斑岩的稀土配分模式图表现为左高右低的较平滑曲线,轻稀土富集,重稀土亏损.稀土元素的质量迁移计算结果同样证明了稀土元素在矿化蚀变过程中发生了分馏,且从钾长石化带到青磐岩化带,稀土元素带出量呈递增趋势.③该矿床样品的稀土元素配分特征表明,较新鲜花岗闪长斑岩与蚀变围岩的曲线基本相同,表明成矿物质主要来自花岗闪长岩熔体,并且可能有海水的混入.由δEu、δCe值及Fe2O3与FeO带出带入的关系可知,斑岩流体晚期氧逸度逐渐升高,表明成矿环境可能由相对还原过渡到氧化环境.④除Al2O3、TiO2保持惰性外,常量元素、稀土元素在矿化蚀变过程中都发生不同程度的带入带出,富集贫化特征和迁移规律不完全相同.  相似文献   

11.
Komatiites are mantle-derived ultramafic volcanic rocks. Komatiites have been discovered in several States of India, notably in Karnataka. Studies on the distribution of trace-elements in the komatiites of India are very few. This paper proposes a simple, accurate, precise, rapid, and non-destructive wavelength-dispersive x-ray fluorescence (WDXRF) spectrometric technique for determining Sc, V, Cr, Co, Ni, Cu, Zn, Rb, Sr, Y, Zr, Nb, Ba, Pb, and Th in komatiites, and discusses the accuracy, precision, limits of detection, x-ray spectral-line interferences, inter-element effects, speed, advantages, and limitations of the technique. The accuracy of the technique is excellent (within 3%) for Sc, V, Cr, Co, Ni, Cu, Zn, Rb, Sr, Zr, Nb, Ba, Pb, and Th and very good (within 4%) for Y. The precision is also excellent (within 3%) for Sc, V, Cr, Co, Ni, Cu, Zn, Rb, Sr, Y, Zr, Nb, Ba, Pb, and Th. The limits of detection are: 1 ppm for Sc and V; 2 ppm for Cr, Co, and Ni; 3 ppm for Cu, Zn, Rb, and Sr; 4 ppm for Y and Zr; 6 ppm for Nb; 10 ppm for Ba; 13 ppm for Pb; and 14 ppm for Th. The time taken for determining Sc, V, Cr, Co, Ni, Cu, Zn, Rb, Sr, Y, Zr, Nb, Ba, Pb, and Th in a batch of 24 samples of komatiites, for a replication of four analyses per sample, by one operator, using a manual WDXRF spectrometer, is only 60 hours.  相似文献   

12.
最新的流行病学研究表明,空气中较高浓度的悬浮细颗粒可能对人类的健康有不利的影响。根据该项研究显示,由于心脏病、慢性呼吸问题和肺功能指标恶化而导致死亡率的升高与细尘粒子有关。这些研究结果已经促使欧盟于1999年4月出台了限制空气中二氧化硫、二氧化氮、氧化氮、铅和颗粒物含量的法案(1999/30/EC),对各项指标包括对可吸入PM10颗粒的浓度提出了新的限制性指标。PM10颗粒是指可以通过预分级器分离采集的气体动力学直径小于10μm的细颗粒。目前研究的兴趣重点逐步偏向PM2.5这些更细微颗粒物,PM2.5这种颗粒物对健康有明显的不利影响。在欧盟指令2008/50/EC中,对PM10和PM2.5都提  相似文献   

13.
This paper reports the first results of a study of 11 isotope systems (3He/4He, 40Ar/36Ar, 34S/32S, 65Cu/63Cu, 62Ni/60Ni, 87Sr/86Sr, 143Nd/144Nd, 206–208Pb/204Pb, Hf–Nd, U–Pb, and Re–Os) in the rocks and ores of the Cu–Ni–PGE deposits of the Norilsk ore district. Almost all the results were obtained at the Center of Isotopic Research of the Karpinskii All-Russia Research Institute of Geology. The use of a number of independent genetic isotopic signatures and comprehensive isotopic knowledge provided a methodic basis for the interpretation of approximately 5000 isotopic analyses of various elements. The presence of materials from two sources, crust and mantle, was detected in the composition of the rocks and ores. The contribution of the crustal source is especially significant in the paleofluids (gas–liquid microinclusions) of the ore-forming medium. Crustal solutions were probably a transport medium during ore formation. Air argon is dominant in the ores, which indicates a connection between the paleofluids and the atmosphere. This suggests intense groundwater circulation during the crystallization of ore minerals. The age of the rocks and ores of the Norilsk deposits was determined. The stage of orebody formation is restricted to a narrow age interval of 250 ± 10 Ma. An isotopic criterion was proposed for the ore-bearing potential of mafic intrusions in the Norilsk–Taimyr region. It includes several interrelated isotopic ratios of various elements: He, Ar, S, and others.  相似文献   

14.
本文介绍样品经四硼酸锂熔融制成玻璃小饼。采用Lachance模式和理论a系数来校正元素间的效应,由3080E型X-射线荧光谱仪和DF-350B数据处理系统完成硅酸盐中十三个项目的测定。  相似文献   

15.
本文拟定了一种以熔融法制备样片,用X射线荧光光谱测定硅酸盐类样品中Si、Fe、Al、Tj、Mn、Ca、Mg、K、Na、P等元素的分析方法。在对不同靶材X光管和分光晶体实验对比的基础上,选择了最佳的测量条件。该法具有快速、准确,测量范围广,检测限低,价格便宜等优点。经过近百个各种类型标样或管理样品的分析对比表明,本法不仅适用于硅酸盐类岩石样品的分析,还适用于铁矿、铝土矿、碳酸盐类岩矿样品以及水泥、耐火材料等样品的分析。  相似文献   

16.
Mining induced subsidence can significantly affect mining costs where major surface facilities and natural environment need to be protected. Overburden grout injection is a technology used to control coal mine subsidence by injecting the mine waste material extracted from the coal back into the inter-burden rock during longwall mining. The flowing slurry is here categorised as a nonlinear viscous cohesive (Bingham plastic) fluid. During longwall mining the grout slurry is pumped into the separated beds of the rock mass through a central vertical borehole, which is drilled deep into the inter-burden rock strata above the coal seam. However, a blockage can occur in the injection system when the slurry velocity falls below a certain critical threshold velocity, indicating a material phase change from cohesive-viscous to cohesive-frictional. In situ field injection tests through boreholes have been simulated at a smaller scale at the CSIRO laboratory in Brisbane by pumping the slurry through a radial disk (gap = 4 mm) from its centre. Laboratory experiments indicate a general, nonlinear, cohesive, viscous, frictional model for shear behaviour of the slurry, in which the material shear parameters are functions of the disk radial distance. Complete dimensional and dimensionless analytical solutions have been developed based on an approach related to Bingham–Herschel–Bulkley fluid mechanics. The derived formulae include relations for minimum pump pressure, local pressure and pressure gradient, wall shear stress, volume rate, velocity and velocity gradient. The theoretical results match the experimental measurements. The experiments covered slurries with maximum particle sizes of 0.5 to 2 mm with about 50% being larger than 100 µm. The viscosities at the various solids concentrations were measured with a standard torsion viscometer. This study differs from the previous research in several distinct aspects, namely, consideration of the variable shear parameters rather than fixed values, inclusion of total nonlinear behaviour, and implementation of a friction function to mimic behaviour of the deposited and consolidating stiff slurry, which can cause a significant pressure rise as a result of the increased shear resistance.  相似文献   

17.
18.
Between 1985 and 1991, two new mountain protected areas (MTNPA) covering more than 35,000 km2 and based on participatory management models — the Makalu-Barun National Park and Conservation Area, Nepal, and Qomolangma Nature Preserve, Tibet Autonomous Region — were successfully established through the collaborative efforts of Woodlands Mountain Institute and conservationists in China and Nepal. Characteristics common to both projects include the importance of establishing (1) effective rationales, (2) local support constituencies, (3) a senior advisory group, (4) a task force, (5) linkages between conservation and development, and (6) fund raising mechanisms. The lessons derived from the experiences of Woodlands Mountain Institute are of significant value to others in preserving MTNPA. Increased collaboration and communication between all interested in conservation, however, will remain a critical component for expanding mountain protected area coverage to throughout the world.  相似文献   

19.
岩石密度和超高压岩石折返速率   总被引:1,自引:3,他引:1  
在常温常压条件下对中国大陆科学钻CCSD主孔100-3000米岩心样品进行了密度测量,建立了密度连续剖面,并界定了不同超高压岩石的密度值。通过对比高温高压物性实验资料,岩石密度随着退变程度增强而降低,榴辉岩密度变化序列为3.52g/cm3→3.49g/cm3→3.07g/cm3→2.93g/cm3。超高压长英质岩石密度变化序列为3.00g/cm→2.80g/cm3→2.65g/cm3。上述实验资料是讨论不同折返阶段岩石所受浮力的基础,为研究折返速率大小提供了基本参数。本文通过折返板块运动平衡时,上浮力与粘滞力平衡这一关系式,定量研究了大陆俯冲板块的折返速率,认为密度差产生上浮力从而引起折返,温度对板块折返速率的影响最为显著;密度差大小、折返角度、折返板块大小对折返速率也有直接的影响。定量模拟分析表明,在温度高于850℃时,板块的折返速率可以超过100mm/a;当温度降至700℃时,折返速率则低于1.5mm/a。作者认为在折返早期,温度较高,板块快速折返至60-70km榴辉岩相深度;随着传导散热,温度降低,板块以较慢的速率折返至中下地壳。折返速率的估算表明,浮力是板块折返第一阶段(从>100km深部折返至<40km的中下地壳)的主要驱动力。  相似文献   

20.
《Applied Geochemistry》2001,16(2):137-159
Five hundred and ninety-eight samples of terrestrial moss (Hylocomium splendens and Pleurozium schreberi) collected from a 188,000 km2 area of the central Barents region (NE Norway, N Finland, NW Russia) were analysed by ICP-AES and ICP-MS. Analytical results for Al, B, Ba, Ca, K, La, Mg, Mn, Na, P, Rb, Si, Sr, Th, U and Y concentrations are reported here. Graphical methods of data analysis, such as geochemical maps, cumulative frequency diagrams, boxplots and scatterplots, are used to interpret the origin of the patterns for these elements. None of the elements reported here are emitted in significant amounts from the smelting industry on the Kola Peninsula. Despite the conventional view that moss chemistry reflects atmospheric element input, the nature of the underlying mineral substrate (regolith or bedrock) is found to have a considerable influence on moss composition for several elements. This influence of the chemistry of the mineral substrate can take place in a variety of ways. (1) It can be completely natural, reflecting the ability of higher plants to take up elements from deep soil horizons and shed them with litterfall onto the surface. (2) It can result from naturally increased soil dust input where vegetation is scarce due to harsh climatic conditions for instance. Alternatively, substrate influence can be enhanced by human activity, such as open-cast mining, creation of ‘technogenic deserts’, or handling, transport and storage of ore and ore products, all of which magnify the natural elemental flux from bedrock to ground vegetation. Seaspray is another natural process affecting moss composition in the area (Mg, Na), and this is most visible in the Norwegian part of the study area. Presence or absence of some plant species, e.g., lichens, seems to influence moss chemistry. This is shown by the low concentrations of B or K in moss on the Finnish and Norwegian side of the (fenced) border with Russia, contrasting with high concentrations on the other side (intensive reindeer husbandry west of the border has selectively depleted the lichen population).  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号