Pinch-out style and position of tidally influenced strata in a regressive–transgressive wave-dominated deltaic sandbody, Twentymile Sandstone, Mesaverde Group, NW Colorado

The Upper Cretaceous Twentymile Sandstone of the Mesaverde Group in NW Colorado, USA, has been analysed with respect to its pinch‐out style and the stratigraphic position of tidally influenced facies within the sandstone tongue. Detailed sedimentological analysis has revealed that the Twentymile Sandstone as a whole is a deltaic shoreface sandstone tongue up to 50 m thick proximally. Facies change character vertically from very fine‐grained, storm wave‐dominated shelf sandstones and mudstones to fine‐grained, wave‐dominated sandstones and, finally, to fine‐ to coarse‐grained tidally dominated sandstones. The pinch‐out style is characterized by a basinward splitting of the massive proximal sandbody into seven coarsening‐upward fourth‐order sequences consisting of a lower shaly part and an upper sandy part (sandstone tongue). These are stacked overall to reflect the regressive‐to‐transgressive development of the tongue. Each of the lower sandstone tongues 1–3 are gradationally based, very fine‐grained and dominated by hummocky cross‐stratification and were deposited on the lower to upper shoreface. Sandstone tongues 4 and 5 prograded further basinwards than the underlying tongues, are erosively based, fine‐ to coarse‐grained and mainly hummocky, herringbone and trough cross‐stratified. Especially in tongue 5, tidal indicators, such as bipolar foresets and double mud drapes, are common. These tongues were deposited as upper shoreface and tidal channel sandstones respectively. Sandstone tongues 6 and 7 retrograded in relation to tongue 5, are very fine‐ to fine‐grained and hummocky cross‐stratified. These tongues were deposited in lower shoreface to offshore transition environments. The two lower fourth‐order sequences were deposited during normal regressions during slowly rising or stable relative sea level and represent the highstand systems tract. The three succeeding fourth‐order sequences, which show succeedingly increasing evidence of tidal influence, were deposited during falling and lowstand of relative sea level and represent the falling stage (forced regressive) and lowstand systems tracts. The uppermost two fourth‐order sequences were deposited during rapidly rising sea level in the transgressive systems tract. The maximum tidal influence occurred during lowstand progradation, in contrast to most other published examples reporting maximum tidal influence during transgression.     

A sequence stratigraphic framework for a narrow,current-swept continental shelf: The Durban Bight,central KwaZulu-Natal,South Africa

High resolution seismic lines from the inner and mid-shelf of the Durban Bight reveal an unprecedented view of the seismic stratigraphy of the central KwaZulu-Natal uppermost continental margin. Seven units are recognised from the shelf on the basis of their stratal architecture and bounding unconformities. These comprise four incompletely preserved sequences consisting of deposits of the highstand systems tract (Unit B), falling stage systems tracts (Unit C), the transgressive systems tract (Units A, D and G) and lowstand systems tracts (early fill of the incised valleys and strike diachronous prograding reflectors of Unit A). Seismic facies recognised as incised valley fills correspond to the lowstand and transgressive systems tracts. When integrated with published accounts of onshore and offshore lithostratigraphy and local sea level curves, we recognise an Early Santonian transgression (Unit A to Unit B), superimposed by uplift-induced pulses of forced regression. A Late Campanian relative sea level fall (Unit C) followed. Sediments of the Tertiary period are not evident on the Durban Bight shelf except for isolated incised valley fills of Unit D lying within incised valleys of Late Pliocene age. Overlying these are two stages of Pleistocene shoreline deposits of indeterminate age. Erosion concurrent with relative sea level fall towards the last glacial maximum shoreline carved a third set of incised valleys within which sediments of the Late Pleistocene/Holocene have infilled.     

Allogenic and autogenic controls on facies and stratigraphic architecture of the Lower Jurassic Mashabba Formation,Gebel Al-Maghara,North Sinai,Egypt

The Lower Jurassic Mashabba Formation crops out in the core of the doubly plunging Al-Maghara anticline, North Sinai, Egypt. It represents a marine to terrestrial succession deposited within a rift basin associated with the opening of the Neotethys. Despite being one of the best and the only exposed Lower Jurassic strata in Egypt, its sedimentological and sequence stratigraphic framework has not been addressed yet. The formation is subdivided informally into a lower and upper member with different depositional settings and sequence stratigraphic framework. The sedimentary facies of the lower member include shallow-marine, fluvial, tidal flat and incised valley fill deposits. In contrast, the upper member consists of strata with limited lateral extension including fossiliferous lagoonal limestones alternating with burrowed deltaic sandstones. The lower member contains three incomplete sequences (SQ1-SQ3). The depositional framework shows transgressive middle shoreface to offshore transition deposits sharply overlain by forced regressive upper shoreface sandstones (SQ1), lowstand fluvial to transgressive tidal flat and shallow subtidal sandy limestones (SQ2), and lowstand to transgressive incised valley fills and shallow subtidal sandy limestones (SQ3). In contrast, the upper member consists of eight coarsening-up depositional cycles bounded by marine flooding surfaces. The cycles are classified as carbonate-dominated, siliciclastic-dominated, and mixed siliciclastic-carbonate. The strata record rapid changes in accommodation space. The unpredictable facies stacking pattern, the remarkable rapid facies changes, and chaotic stratigraphic architecture suggest an interplay between allogenic and autogenic processes. Particularly syndepositional tectonic pulses and occasional eustatic sea-level changes controlled the rate and trends of accommodation space, the shoreline morphology, the amount and direction of siliciclastic sediment input and rapid switching and abandonment of delta systems.     

Sharp‐based marine sandstone bodies in the Mulichinco Formation (Lower Cretaceous), Neuquén Basin,Argentina: remnants of transgressive offshore sand ridges

The interpretation of sharp‐based shallow‐marine sandstone bodies encased in offshore mudstones, particularly transgressive units, has been a subject of recent debate. This contribution provides a multiple‐dataset approach and new identification criteria which could help in the recognition of transgressive offshore sandstone bodies worldwide. This study integrates sedimentology, ichnology, taphonomy and palaeoecology of Mulichinco Formation strata in the central Neuquén Basin (Argentina) in order to describe and interpret sharp‐based sandstone bodies developed in ramp‐type marine settings. These bodies are sandwiched between finer‐grained siliciclastics beneath and thin carbonates above. The underlying sediments comprise progradational successions from offshore mudstones to offshore transition muddy sandstones, grading occasionally into lower shoreface sandstones. The surfaces capping the regressive siliciclastics are flat and regionally extensive, and are demarcated by skeletal concentrations and a Glossifungites suite; they are also marked by sandstone rip‐up clasts, with encrustations and borings on all sides. These surfaces are interpreted as composite discontinuities, cut during a relative sea‐level fall and remodelled during the initial transgression. The overlying transgressive sandstone bodies are 3 to 7 m thick, >4 km long and about three times longer than wide; they are composed of fine‐grained sandstones with little lateral change in grain size. Cross‐stratification and/or cross‐lamination are common, typically with smaller‐scale structures and finer grain size towards the top. Large‐scale, low‐angle (5° to 8°) inclined stratification is also common, dipping at ca 30° with respect to body elongation and dominant currents. These sandstone bodies are interpreted as offshore sand ridges, probably developed under the influence of tidal currents. Intense burrowing is typical at the top of each unit, suggesting an abandonment stage. Final deactivation favoured colonization by epibenthic‐dominated communities and the formation of skeletal‐rich limestones during the latest transgressive conditions. As partial reworking of pre‐existing ridges occurred during this stage, the Mulichinco sandstone bodies are considered the remnants of transgressive offshore sand units.     

Architecture of vertically stacked fluvial deposits,Atane Formation,Cretaceous, Nuussuaq,central West Greenland

Excellent exposures of thick, multistorey, fluvial deposits from the deltaic Atane Formation on south‐east Nuussuaq, central West Greenland, show the architecture of up to 100 m thick continuously aggrading fluvial depositional complexes. The succession comprises vertically stacked channel belt sandstones separated by thin floodplain deposits, with little to no incision between storeys. Architectural elements and palaeocurrent patterns of channel deposits indicate deposition in large, relatively stable, low‐sinuosity rivers, probably located within an incised valley. Gradual transitions from channel to floodplain deposits accompanied by a gradual change from floodplain to spillover sand suggest avulsion on the floodplain as a possible mechanism for the vertically alternating channel and floodplain deposits. Despite its relative proximity to contemporaneous sea‐level (ca 35 km upstream from the palaeo‐shoreline) the depositional complex is entirely non‐marine. The aggrading nature of the deposits suggests a continuously rising base level coupled with a high and steady sediment supply. Vertical alternations between floodplain and channel deposits may be forced by subtle interruptions in this balance or autocyclic mechanisms on the floodplain. This study provides an example of aggrading lowstand/non‐marine transgressive systems tract deposits.     

珠江口盆地番禺低隆起韩江组高精度层序格架和沉积样式与岩性地层圈闭的发育分布

番禺低隆起是珠江口盆地重要的含油气区。区内的韩江组可划分为3个三级层序,其顶底界面均以削蚀和上超不整合及其对应的整合为界;依据四级旋回的海泛面可进一步划分出11个四级层序或体系域。三级层序SQhj1上部的2个四级层序发育两套具有前积结构的三角洲沉积,SQhj2的低位域广泛发育下切谷充填和低水位楔。结合钻井约束的地震沉积学和古地貌学分析,揭示了四级层序沉积相的平面分布和演化。高位域三角洲前缘砂坝和水下水道、低位下切水道及低位楔三角洲、海滩砂坝砂体等为区内主要的储集砂体,它们与其上覆的海进泥岩形成良好的储盖组合,沿上超斜坡带、下斜坡或坡折带可形成岩性地层圈闭。     

High-resolution sequence stratigraphy of a complex, incised valley succession, Cobequid Bay — Salmon River estuary, Bay of Fundy, Canada

The post-glacial succession in the Cobequid Bay — Salmon River incised valley contains two sequences, the upper one incomplete. The lower sequence contains only highstand system tracts (HST) deposits which accumulated under microtidal, glacio-marine deltaic conditions. The upper sequence contains two, retrogradationally stacked parasequences. The lower one accumulated in a wave-dominated estuarine environment under micro-mesotidal conditions. It belongs to the lowstand system tract (LST) or early transgressive system tract (TST) depending on the timing and location of the lowstand shoreline, and contains a gravel barrier that has been overstepped and preserved with little modification. The upper parasequence accumulated in the modern, macrotidal estuary, and is assignable to the late TST. Recent, net progradation of the fringing marshes indicates that a new HST has begun. The sequence boundary separating the two sequences was formed by fluvial incision, and perhaps also by subtidal erosion during the relative sea level fall. Additional local erosion by waves and tidal currents occurred during the transgression. The base of the macrotidal sands is a prominent tidal ravinement surface which forms the flooding surface between the backstepping estuarine parasequences. Because fluvial deposition continued throughout the transgression, the fluvial-estuarine contact is diachronous and cannot be used as the transgressive surface. The maximum flooding surface will be difficult to locate in the macrotidal sands, but is more easily identified in the fringing muddy sediments. These observations indicate that: (1) large incised valleys may contain a compound fill that consists of more than one sequence; (2) relative sea level changes determine the stratal stacking patterns, but local environmental factors control the nature of the facies and surfaces; (3) these surfaces may have complex origins, and commonly become amalgamated; (4) designation of the transgressive surface (and thus the LST) is particularly difficult as many of the prominent surfaces in the valley fill are diachronous facies boundaries; and (5) the transgression of complex topography may cause geologically instantaneous changes in tidal range, due to resonance under particular geographical configurations.     

Sequence stratigraphic framework for mixed aeolian,peritidal and marine environments: Insights from the Pennsylvanian subtropical record of Western Pangaea

Due to difficulties in correlating aeolian deposits with coeval marine facies, sequence stratigraphic interpretations for arid coastal successions are debated and lack a unifying model. The Pennsylvanian record of northern Wyoming, USA, consisting of mixed siliciclastic–carbonate sequences deposited in arid, subtropical conditions, provides an ideal opportunity to study linkages between such environments. Detailed facies models and sequence stratigraphic frameworks were developed for the Ranchester Limestone Member (Amsden Formation) and Tensleep Formation by integrating data from 16 measured sections across the eastern side of the Bighorn Basin with new conodont biostratigraphic data. The basal Ranchester Limestone Member consists of dolomite interbedded with thin shale layers, interpreted to represent alternating deposition in shallow marine (fossiliferous dolomite) and supratidal (cherty dolomite) settings, interspersed with periods of exposure (pedogenically modified dolomites and shales). The upper Ranchester Limestone Member consists of purple shales, siltstones, dolomicrites and bimodally cross‐bedded sandstones in the northern part of the basin, interpreted as deposits of mixed siliciclastic–carbonate tidal flats. The Tensleep Formation is characterized by thick (3 to 15 m) aeolian sandstones interbedded with peritidal heteroliths and marine dolomites, indicating cycles of erg accumulation, preservation and flooding. Marine carbonates are unconformably overlain by peritidal deposits and/or aeolian sandstones interpreted as lowstand systems tract deposits. Marine transgression was often accompanied by the generation of sharp supersurfaces. Lags and peritidal heteroliths were deposited during early stages of transgression. Late transgressive systems tract fossiliferous carbonates overlie supersurfaces. Highstand systems tract deposits are lacking, either due to non‐deposition or post‐depositional erosion. The magnitude of inferred relative sea‐level fluctuations (>19 m), estimated by comparison with analogous modern settings, is similar to estimates from coeval palaeotropical records. This study demonstrates that sequence stratigraphic terminology can be extended to coastal ergs interacting with marine environments, and offers insights into the dynamics of subtropical environments.     

Architecture of fluvial-dominated valley-fill deposits in the Cretaceous Fall River Formation

The Fall River Formation is a 45 m thick layer of fluvial-dominated valley-fills and shore-zone strata deposited on the stable cratonic margin of the Cretaceous Western Interior Seaway. Fall River deposits in Red Canyon, in the south-west corner of South Dakota (USA), expose a cross-section of a 3.5 km wide valley-fill sandstone and laterally adjacent marine deposits. The marine deposits comprise three 10 m thick upward-shoaling sequences; each composed of multiple metres-thick upward-coarsening successions. The lower two of these sequences are laterally cut by the valley-fill sandstone, and are capped by metres-thick muddy palaeosols. The upper sequence spans the top of the valley-fill sandstone, and is overlain by the Skull Creek Shale. The 30 m thick valley sandstone is partitioned into four distinct fills by major erosion surfaces, and each of these fills contain many metres-thick channel-form bodies. Deposits in the lower parts of these fills are sheet-like, top-truncated channel bodies, whereas deposits in the upper parts of fills are upward-concave, laterally amalgamated channel bodies, more completely preserved heterolithic channel bodies, or wave-deposited sheets. Each valley-fill basal erosion surface records an episode of valley incision and relative sea-level fall, and the gradual progression from fluvial to more estuarine deposits upwards within each fill records relative sea-level rise. All fills are dominantly channel deposits and are capped by marine flooding surfaces. The dominance of channel deposits, the gradual change to more estuarine facies in the upper parts of fills, and the location of flooding surfaces at valley-fill tops all suggest that sediment supply initially kept pace with relative sea-level rise and valleys filled during late marine lowstand and transgression, not during subsequent highstands. Recently proposed facies models have focused on variations in the relative strength of tide, wave and river currents as controls on valley-fill deposits. However, relative rates of sediment supply and basin accommodation change, and the shift in this ratio along the depositional profile during multiple-scale cycles in relative sea-level, are equally important controls on the style of valley-fill deposits.     

Architecture and recognition criteria of ancient shelf ridges; an example from Campanian Almond Formation in Hanna Basin,USA

Shelf ridges are sedimentary bodies formed on the continental shelf due to transgressive reworking (tidal or storm) of lowstand deposits. Common on modern shelves, they are under‐represented in the geological record due to a lack of recognition criteria and facies model. This article proposes a new facies and architectural model for shelf ridges, linked to their inception–evolution–abandonment cycle and the process regime of the basin. The model is mainly based on new outcrop data and interpretations from three sandstone bodies of the Almond Formation, an overall transgressive interval during the infill of the Campanian Western Interior Seaway. Building from the case study, and ancient and modern examples, six characteristics are proposed for the recognition of ancient shelf ridges. Shelf ridges: (i) are encased between thick marine mudstone intervals; (ii) have a basal unconformity that erodes into marine muds or into the remnants of a previous shoreline; (iii) have a non‐erosional upper boundary that transitions into marine muds; (iv) are characterized by clean and well‐sorted sandstones, often cross‐bedded; (v) contain fully marine ichnofauna; and (vi) present compound architectures with large accretion surfaces and lower order structures. Although shelf ridges have been described in previous studies as generated exclusively by either tidal or storm currents, it is clear, from modern examples and the case study, that these two processes can be recorded and preserved in a single shelf ridge. The stratigraphy of these sandstone bodies is therefore much more complex than previously recognized, bearing the signature of changing tidal and storm intensity through time. Because they are developed during transgressions, shelf ridges are commonly subject to strong changes in process regime as sea‐level changes can easily affect the oceanographic conditions and the morphology of the basin. For this reason, shelf ridges can provide the best record of shelf process variability during transgressions.     

The application of high-resolution sequence stratigraphy to fluvial systems: a case study from the Upper Carboniferous Breathitt Group, eastern Kentucky, USA

The Pennsylvanian Pikeville, Hyden and Four Corners formations of the Breathitt Group in eastern Kentucky, USA, contain six major facies associations along with a number of subassociations. These facies associations are offshore siltstone, rhythmically bedded mouthbar heteroliths, predominantly fine-grained floodplain deposits, minor channel fills, major distributary channels and major, stacked fluvial bodies. The stacked fluvial bodies are incised into a variety of open marine and delta plain deposits, have widths of several kilometres and exhibit a range of sandy fill types. These fluvial complexes are interpreted as incised valley fills. Parasequences and parasequence sets are not identifiable. Nonetheless, it is possible to identify systems tracts on the basis of sequential position, facies associations and systematic changes in architectural style and sediment body geometries. The studied portion of the Breathitt Group comprises stacked 4th-order sequences, which occur in lowstand, transgressive and highstand sequence sets related to the development of a lower frequency base level cycle. In the lowstand sequence set, incision associated with successive 4th-order sequence boundaries has commonly removed all the HST and TST of the underlying sequences, such that succeeding 4th-order incised valley fills are amalgamated. Within the transgressive sequence set, incision is at a minimum and incised valley fills tend to stack discretely with the maximum amount of fine-grained TST and HST between them. The highstand sequence set is transitional between the lowstand and transgressive sequence sets in terms of the amount of transgressive and highstand deposits preserved. Incised valley fills tend to stack discretely.     

Anatomy of a transgressive lag: Panther Tongue Sandstone, Star Point Formation, central Utah

Abstract The Panther Tongue of the Star Point Formation in central Utah contains a variety of transgressive lag deposits that, when mapped regionally, show a sensitive dependence upon pre‐existing topography of the palaeoshoreline. The Panther Tongue consists of a coarsening‐upward sandstone wedge that prograded into the Western Interior Seaway during Late Cretaceous (Santonian) time. High‐resolution sequence stratigraphic analysis revealed that this member was deposited during the long‐distance (>50 km) regression and transgression of a delta into shallow‐marine environments, containing basal highstand, forced regression, lowstand and transgressive systems tracts. Based on grain size, clast composition, lateral extent and stratigraphic position, the coarse sandstones on top of the Panther Tongue were classified into four types: (1) simple; (2) dispersed; (3) oxidized; and (4) local lags. The simple lag is composed of dark grey coarse sandstone with oyster fragments and shark teeth. This lag is typically extensively bioturbated and massive. Laminated and cross‐bedded units are also common. This type of coarse sandstone is interpreted as a typical transgressive lag. The dispersed lag differs in that it contains abundant mud and commonly occurs as multiple beds in thick intervals of muddy sandstone. Mixing of bay/estuarine and shallow ‐ marine mud with simple lag sand may be responsible for deposition of this type of coarse sandstone. The oxidized lag is distinctive in its reddish colour with extensive bioturbation and is commonly overlain by a simple lag. The local lag is composed of thin‐bedded, dark grey, coarse sandstone, occurring locally between the mouth bar and distributary channel. The variation in types, grain size and bed thickness of the coarse‐grained lags was mainly controlled by antecedent topography as suggested by immediately underlying lithofacies. Relatively thick (≈30 cm) simple lags are present on top of mouth‐bar sandstones, whereas dispersed lags are common on top of the distributary channel sandstone and in bay/estuarine and shallow‐marine mudstones. Erosion of topographic highs (mouth bar) resulted in relatively thick accumulation of simple lags. In topographic low areas such as distributary channel, estuary, bay and shallow‐marine environments, fine‐grained muddy sands that were eroded from the nearby topographic highs were redeposited. Intermittent storm waves transported coarse sands both landward and seaward, forming a dispersed lag. The net effect was reworking of local topographic relief during overall transgression, forming an apparently planar transgressive surface of erosion.     

末次盛冰期以来长江三角洲地区的沉积相和古地理

末次盛冰期低海平面期间,长江三角洲地区可划分为2个古地理单元：古河谷和古河间地。下切河谷底部侵蚀面和古河间地顶面构成了冰后期海侵沉积旋回的底界面,它相当于层序地层学中的层序界面。位于河口湾-浅海相中的最大海侵面将冰后期海侵沉积旋回分为其下的海侵层序和其上的海退层序。随着δ¹⁸O ₃期的海平面下降,长江开始下切,至δ¹⁸O ₂期低海面时形成巨大的下切河谷。冰后期海平面上升引发的海侵造成了长江古河谷系的充填和河床、河漫滩－河口湾和部分河口湾－浅海相的形成,尔后的进积产生了部分河口湾－浅海相及三角洲相等。溯源堆积是产生下部河流沉积单元的主要过程,其中河漫滩沉积中出现的潮汐层理和少量小个体有孔虫说明了海洋因素的影响,河口湾－浅海相泥质沉积主要形成于最大海侵之时,三角洲的进积则产生了具有多期河口坝的三角洲。古河间地表面的硬粘土层经历了沉积和成壤作用交替、持续成壤作用和早期成岩作用,它们大致分别对应于δ¹⁸O ₃期、δ¹⁸O ₂期和δ¹⁸O ₁期,硬粘土层中留下了这3种作用的烙印。长江三角洲古河间地的古土壤母质属河漫滩相。持续成壤阶段河流基面和地下水位均较低,年降雨量约为500～800 mm,相当于现今的温带地区,干湿周期变化明显,地下水升降频繁。所有这些表明,当时并非干旱气候。     

Sedimentology and palaeogeomorphology of four large valley systems incising delta plains, western Canada Foreland Basin: implications for mid-Cretaceous sea-level changes

The mid-Cenomanian Dunvegan Formation represents a delta complex deposited on a foreland basin ramp over about 2 my. The Dunvegan is divided into 10 transgressive–regressive allomembers, labelled J–A in ascending order, each defined by regional marine transgressive surfaces. Parasequences within allomembers show an aggradational to offlapping stacking pattern that reflects alternate generation and removal of accommodation. The upper surfaces of allomembers H–E are incised by extensive valley systems traceable for up to 320 km and over about 50 000 km². Valley depths range up to 41 m and can change significantly over short distances. However, the average depth of incision (mean 21 m) shows no systematic variation in longitudinal profiles and no evidence of headward shallowing. Valleys are typically 1–2 km wide, but locally widen to about 8 km. Widening is sometimes associated with confluence zones, but elsewhere it is not. Updip reaches of valleys are dominated by cross-bedded fluvial sandstone forming multistorey point-bar deposits. Sandstones contain widespread but uncommon paired carbonaceous drapes recognizable as tidal bundles. Inclined heterolithic stratification is locally well developed at the top of the valley fill. Downdip reaches of valleys, typically within 50 km of the lowstand shoreline, have a sandstone-dominated lower part and, locally, a mud-rich upper portion consisting of a variety of laminated heterolithic facies with a clear tidal signature. These heterolithic deposits may represent central basin, tidal flat, bayhead delta and point-bar environments. Valley filling took place mainly during the transgressive systems tract (TST) when tidally influenced environments migrated upvalley. Semi-diurnal tidal backwater effects extended at least 30 km landward of the regional maximum transgressive marine shoreline. The aggradational late TST and highstand systems tract (HST) includes deltaic and coastal plain deposits comprising lake and anastomosed river deposits that suggest a very low gradient (≈ 1:3000). Delta parasequences of the falling stage systems tract (FSST) offlap seaward and have no equivalent coastal plain deposits. The FSST has an average width of 60 km and an inferred gradient of 1:2500. The upper surfaces of the HST and FSST are extensively incised by valleys. The lowstand systems tract (LST) is subtly aggradational, lacks valleys and is characterized by large delta lobes fed by major distributaries. The width and inferred slope of the FSST, coupled with the thickness of aggradational TST and HST deposits on the coastal plain, suggest a vertical accommodation of about 35 m per transgressive event. About 11 m of this is attributed to isostatic subsidence resulting from water and sediment loads; the residual 24 m is attributed to eustatic rise. This sea-level change is of the same order of magnitude as the valley depths. The length of valleys, however, does not seem to be explicable solely in terms of downstream forcing by sea-level change, and an additional, upstream-forcing mechanism, possibly related to precipitation cycles in the Milankovitch band, might be inferred.     

Late Quaternary valley-fill succession of the Lower Tagus Valley, Portugal

The Lower Tagus Valley in Portugal contains a well-developed valley-fill succession covering the complete Late Pleistocene and Holocene periods. As large-scale stratigraphic and chronologic frameworks of the Lower Tagus Valley are not yet available, this paper describes facies, facies distribution, and sedimentary architecture of the late Quaternary valley fill. Twenty four radiocarbon ages provide a detailed chronological framework. Local factors affected the nature and architecture of the incised valley-fill succession. The valley is confined by pre-Holocene deposits and is connected with a narrow continental shelf. This configuration facilitated deep incision, which prevented large-scale marine flooding and erosion. Consequently a thick lowstand systems tract has been preserved. The unusually thick lowstand systems tract was probably formed in a previously (30,000–20,000 cal BP) incised narrow valley, when relative sea-level fall was maximal. The lowstand deposits were preserved due to subsequent rapid early Holocene relative sea-level rise and transgression, when tidal and marine environments migrated inland (transgressive systems tract). A constant sea level in the middle to late Holocene, and continuous fluvial sediment supply, caused rapid bayhead delta progradation (highstand systems tract). This study shows that the late Quaternary evolution of the Lower Tagus Valley is determined by a narrow continental shelf and deep glacial incision, rapid post-glacial relative sea-level rise, a wave-protected setting, and large fluvial sediment supply.     

Sedimentology and stratigraphic development of the upper Nyalau Formation (Early Miocene), Sarawak,Malaysia: A mixed wave- and tide-influenced coastal system

This work presents the first detailed facies analysis of the upper Nyalau Formation exposed around Bintulu, Sarawak, Malaysia. The Lower Miocene Nyalau Formation exposures in NW Sarawak represent one of the closest sedimentological outcrop analogues to the age equivalent, hydrocarbon-bearing, offshore deposits of the Balingian Province. Nine types of facies associations are recognised in the Nyalau Formation, which form elements of larger-scale facies successions. Wave-dominated shoreface facies successions display coarsening upward trends from Offshore, into Lower Shoreface and Upper Shoreface Facies Associations. Fluvio-tidal channel facies successions consist of multi-storey stacks of Fluvial-Dominated, Tide-Influenced and Tide-Dominated Channel Facies Associations interbedded with minor Bay and Mangrove Facies Associations. Estuarine bay facies successions are composed of Tidal Bar and Bay Facies Associations with minor Mangrove Facies Associations. Tide-dominated delta facies successions coarsen upward from an Offshore into the Tidal Bar Facies Association. The Nyalau Formation is interpreted as a mixed wave- and tide-influenced coastal depositional system, with an offshore wave-dominated barrier shoreface being incised by laterally migrating tidal channels and offshore migrating tidal bars. Stratigraphic successions in the Nyalau Formation form repetitive high frequency, regressive–transgressive cycles bounded by flooding surfaces, consisting of a basal coarsening upward, wave-dominated shoreface facies succession (representing a prograding barrier shoreface and/or beach-strandplain) which is sharply overlain by fluvio-tidal channel, estuarine bay or tide-dominated delta facies successions (representing more inshore, tide-influenced coastal depositional environments). An erosion surface separates the underlying wave-dominated facies succession from overlying tidal facies successions in each regressive–transgressive cycle. These erosion surfaces are interpreted as unconformities formed when base level fall resulted in deep incision of barrier shorefaces. Inshore, fluvio-tidal successions above the unconformity display upward increase in marine influence and are interpreted as transgressive incised valley fills.     

钱塘江下切河谷充填物沉积序列和分布模式

以最新钻取的SE2孔沉积物为重点研究对象,对晚第四纪以来钱塘江下切河谷充填物的沉积特征和沉积相进行了精细研究,重建了研究区地层结构和层序地层格架,总结了强潮型钱塘江河口湾和下切河谷的沉积模式。钱塘江下切河谷充填物自下而上依次发育河床、河漫滩、古河口湾、近岸浅海和现代河口湾5种沉积相类型,表现为一个较完整的Ⅰ型层序,其内部层序界面、初始海泛面、最大海泛面、海侵和海退潮流侵蚀面、体系域内海侵面发育。钱塘江下切河谷充填物自海向陆可划分为海向段、近海段、近陆段和陆向段4段,各段沉积序列和海陆相互作用程度不同。在钱塘江下切河谷充填物中海陆过渡部位首次明确划分出了古河口湾相,并对其沉积特征和分布模式进行了初步探讨;其形成时间在9000 a BP左右,具有与现代河口湾不同的沉积特征,表现为中部为潮道砂体沉积,向陆渐变为受潮流影响的河流沉积,两侧被潮坪或盐沼沉积包围,沉积物在平面上自陆向海呈现粗-细-粗的分布模式。现代河口湾平面上自陆向海依次发育受潮流影响的河流沉积、粉砂质砂坎、潮道-潮流砂脊复合体和湾口泥质沉积区,沉积物呈现粗-细-粗-细的分布模式,与大多数河口湾常见的粗-细-粗的分布格局明显不同。     

Palaeovalleys and protozoan assemblages in a Late Carboniferous cyclothem, Sydney Basin, Nova Scotia

The early Stephanian Bonar Cyclothem of the Sydney Basin, Nova Scotia, contains an erosional surface cut through coastal plain strata with economic coals and distributary channel bodies. The erosion surface is interpreted as a palaeovalley 20 m deep and at least 7 km wide that marks a sequence boundary formed during relative fall in sea level. The palaeovalley is filled with stacked alluvial channel bodies which become more isolated as the valley fill passes upward into red, alluvial plain deposits, probably laid down in an anastomosed river system. In an adjacent, interfluve area, calcretes and red, vertic palaeosols cap coastal strata. Assemblage analysis of agglutinated foraminifera and thecamoebians indicates that the palaeovalley was filled with freshwater sediments before an initial marine transgression flooded the alluvial surface and adjacent interfluve. Valley incision probably reflects glacioeustatic sea level fall. However, the alluvial nature of the valley deposits suggests that valley filling reflects an abundant sediment supply during lowstand and/or transgressive stages and was not a direct consequence of sea level rise. During the subsequent transgression phase, aggradation was rapid as sediment supply apparently kept pace with rising sea level. Features of both channel and extra-channel facies suggest that seasonality intensified during the transition from coastal plain to palaeovalley and alluvial plain deposition.     

东海丽水西次凹古新统明月峰组层序--体系域分析及沉积体系展布

古新统明月峰组是丽水西次凹中重要的含油气层段,其浅海-三角洲相沉积构成了一个完整的三级层序。层序界面在地震剖面上表现为下超、削截、下切,界面底部的下切水道在测井曲线上具块状、箱型等特征性的反映。依据初始海泛面、最大海泛面和高位域晚期存在的明显海退界面,三级层序内可划分出低水位、海侵、高水位和下降体系域四部分。层序界面和主要的海侵、海退面均得到了古生物丰度和分异度的佐证。通过对上述4个体系域平面编图,揭示了不同时期沉积体系展布及其演化。低位-海侵期发育下切谷、滨岸碎屑-三角洲及扇三角洲前缘-远端浊积砂体,前者分布在盆地西缘斜坡带,物源来自西北和东南两个方向;后者发育于盆地中部的东缘陡坡带,物源由东向西推进。高位域和下降体系域以发育大型高角度进积的三角洲前缘砂为特征,高位域三角洲分布在盆地西侧,且南部比北部发育;下降域盆地沉积范围明显缩小,三角洲主要集中在盆地西侧中部。     

Stacked fluvial and tide-dominated estuarine deposits in high-frequency (fourth-order) sequences of the Eocene Central Basin, Spitsbergen

Eighteen coastal-plain depositional sequences that can be correlated to shallow- to deep-water clinoforms in the Eocene Central Basin of Spitsbergen were studied in 1 × 15 km scale mountainside exposures. The overall mud-prone (>300 m thick) coastal-plain succession is divided by prominent fluvial erosion surfaces into vertically stacked depositional sequences, 7–44 m thick. The erosion surfaces are overlain by fluvial conglomerates and coarse-grained sandstones. The fluvial deposits show tidal influence at their seaward ends. The fluvial deposits pass upwards into macrotidal tide-dominated estuarine deposits, with coarse-grained river-dominated facies followed further seawards by high- and low-sinuosity tidal channels, upper-flow-regime tidal flats, and tidal sand bar facies associations. Laterally, marginal sandy to muddy tidal flat and marsh deposits occur. The fluvial/estuarine sequences are interpreted as having accumulated as a series of incised valley fills because: (i) the basal fluvial erosion surfaces, with at least 16 m of local erosional relief, are regional incisions; (ii) the basal fluvial deposits exhibit a significant basinward facies shift; (iii) the regional erosion surfaces can be correlated with rooted horizons in the interfluve areas; and (iv) the estuarine deposits onlap the valley walls in a landward direction. The coastal-plain deposits represent the topset to clinoforms that formed during progradational infilling of the Eocene Central Basin. Despite large-scale progradation, the sequences are volumetrically dominated by lowstand fluvial deposits and especially by transgressive estuarine deposits. The transgressive deposits are overlain by highstand units in only about 30% of the sequences. The depositional system remained an estuary even during highstand conditions, as evidenced by the continued bedload convergence in the inner-estuarine tidal channels.