哀牢山—红河构造带古新世以来多期活动的构造和年代学证据

哀牢山—红河构造带哀牢山段可划分为东部高级变质带和西部低级变质带。构造分析表明:该构造带由3个不同变形域组成,可能代表其经历的3期左行走滑。第1期走滑发生在整个高级变质带,为拉张性左行走滑,形成角闪岩相L型构造岩。第2期走滑形成高级变质带中的高应变带,变形体制接近简单剪切,形成绿片岩相L-S型糜棱岩。第3期主要发生在低级变质带,为挤压性走滑,形成左行逆冲构造格局,并形成低绿片岩相千糜岩。地质年代学数据证明,3期左行走滑的形成时代分别是:距今58~56Ma、27~22Ma和13~12Ma±。哀牢山—红河构造带第1期左行走滑可能对应于印度与欧亚大陆距今60Ma左右的初始碰撞;第2期变形与青藏高原最强的挤压隆升期一致;第3期事件可能代表距今16~13Ma开始的青藏高原物质进一步东挤。哀牢山—红河构造带的3期主要左行走滑均发生在新生代印度与欧亚大陆的汇聚过程中。     

The Major Two-stage Shortening Deformation of the Northern Tibet and Tian Shan Area Since the Latest Oligocene

It seems to be progressively recognized that the stress of the India-Asia convergent front can be transferred rapidly through the southern and central Tibetan lithosphere to the northern Tibet, hence leading to the crustal thickening deformation there during or immediately after the onset of the India-Asia collision(ca.55 Ma).This study focuses on the late Cenozoic deformation and tectonic uplift of the northern Tibet and Tian Shan area.Detailed compilations of a variety of proxy data from sediments and bedrocks suggest that the northern Tibet and Tian Shan area underwent one stage of approximately synchronous widespread contractile deformation since 25–20 Ma, which seemed to decrease at circa 18 Ma as revealed by low-temperature thermochronological data.The latest Oligocene-early Miocene was also significant basin-forming episodes when many intermontane subbasins began to receive syntectonic sedimentation in the northeastern Tibet.Subsequently, the other phase of compressional deformation began to encroach more widely into the northern Tibet and Tian Shan area in episodic steps or continuously from 16–12 Ma to present.     

A geochronological and petrological study of anatectic paragneiss and associated granite dykes from the Day Nui Con Voi metamorphic core complex,North Vietnam: constraints on the timing of metamorphism within the Red River shear zone

The Red River shear zone (RRSZ) is a major left‐lateral strike‐slip shear zone, containing a ductilely deformed metamorphic core bounded by brittle strike‐slip and normal faults, which stretches for >1000 km from Tibet through Yunnan and North Vietnam to the South China Sea. The RRSZ exposes four high‐grade metamorphic core complexes along its length. Various lithologies from the southernmost core complex, the Day Nui Con Voi (DNCV), North Vietnam, provide new constraints on the tectonic and metamorphic evolution of this region prior to and following the initial India–Asia collision. Analysis of a weakly deformed anatectic paragneiss using P–T pseudosections constructed in the MnO–Na₂O–CaO–K₂O–FeO–MgO–Al₂O₃–SiO₂–H₂O–TiO₂–O (MnNCKFMASHTO) system provides prograde, peak and retrograde metamorphic conditions, and in situ U–Th–Pb geochronology of metamorphic monazite yields texturally controlled age constraints. Tertiary metamorphism and deformation, overprinting earlier Triassic metamorphism associated with the Indosinian orogeny and possible Cretaceous metamorphism, are characterized by peak metamorphic conditions of ~805 °C and ~8.5 kbar between c. 38 and 34 Ma. Exhumation occurred along a steep retrograde P–T path with final melt crystallizing at the solidus at ≥~5.5 kbar at ~790 °C. Further exhumation at ~640–700 °C and ~4–5 kbar at c. 31 Ma occurred at subsolidus conditions. U–Pb geochronological analysis of monazite from a strongly deformed pre‐kinematic granite dyke from the flank of the DNCV provides further evidence for exhumation at this time. Magmatic grains suggest initial emplacement at 66.0 ± 1.0 Ma prior to the India–Asia collision, whereas grains with metamorphic characteristics indicate later growth at 30.6 ± 0.4 Ma. Monazite grains from a cross‐cutting post‐kinematic dyke within the core of the DNCV antiform provide a minimum age constraint of 25.2 ± 1.4 Ma for the termination of fabric development. A separate and significant episode of monazite growth at c. 83–69 Ma is suggested to be the result of fluid‐assisted recrystallization following the emplacement of magmatic units.     

Combined thermobarometry and geochronology of peraluminous metapelites from the Karakoram metamorphic complex,North Pakistan; New insight into the tectonothermal evolution of the Baltoro and Hunza Valley regions

Petrographic analysis of peraluminous metapelites from two separate regions of the Karakoram metamorphic complex, North Pakistan, has produced new insights into the P–T–t evolution of the deep crust along the south Asian margin before and after the India‐Asia collision. Average P–T estimates and pseudosection construction in the MnO–Na₂O–CaO–K₂O–FeO–MgO–Al₂O₃–SiO₂–H₂O–TiO₂–Fe₂O₃ (MnNCKFMASHTO) system using THERMOCALC have provided prograde and peak metamorphic conditions and U–Pb geochronology of metamorphic monazite has provided age constraints. Two new events in the tectonothermal evolution of the Hunza Valley have been documented; an andalusite‐grade contact metamorphic event at 105.5 ± 0.8 Ma, at unknown P–T conditions, associated with the widespread subduction‐related granite magmatism before the India‐Asia collision, and a kyanite‐grade overprint of sillimanite‐grade rocks with peak P–T conditions of ～7.8 kbar, 645 °C at 28.2 ± 0.8 Ma associated with the ongoing India‐Asia collision. A kyanite‐grade event observed in the Baltoro region with similar peak P–T conditions (～7.4–8.0 kbar, ～640–660 °C) is interpreted to have occurred sometime after 21.8 ± 0.6 Ma, however, previous studies have suggested that this event commenced in the Baltoro as early as c. 28 Ma. A calculated prograde P–T path for this kyanite‐grade event in the Baltoro indicates that garnet first nucleated on an initially high geothermal gradient (～30 °C km^?1) and grew during a significant increase in pressure of ～2.6 kbar over a temperature increase of ～100 °C. This event is thought to represent evidence for conductive heating of the middle crust during early stages of intrusion and lateral migration of the Baltoro batholith, with thermal conditions comparable with tectonic models of magmatic over‐accretion.     

西秦岭勉略带陆内构造变形研究

秦岭造山带勉略缝合带是古特提斯洋盆向北俯冲形成的华北与华南最后拼接带。这个主缝合带俯冲-碰撞过程中以由北向南的一系列韧性逆冲推覆构造为特征,形成由前泥盆系、泥盆-石炭系和蛇绿混杂岩等不同构造岩片叠置的复杂构造带,碰撞时代从245Ma一直延续到230Ma左右。最近,作者对勉略缝合带内发育的韧性和脆性左行走滑剪切变形进行了研究,结果表明这些顺造山带的左行韧性走滑剪切变形带的变形时代为223±2Ma,与碰撞后花岗岩所确定的碰撞后构造环境的起始时间(225Ma)一致,显示这些韧性走滑剪切变形带是勉略带陆内变形初期变形产物。亦即华北、扬子大陆碰撞之后很快就转入陆内变形阶段,并且是以顺造山带的侧向走滑位移为主要变形方式。勉略带内顺造山带的脆性左行走滑断层的发育,表明这种顺造山带的侧向位移过程从深部到地壳浅层是一致的。因此,大陆碰撞在直接碰撞之后很快转变为顺造山带的侧向走滑位移为主的陆内变形,这种位移可能表现为两个大陆碰撞后的相对走滑,或是碰撞带中强烈变形部分顺造山带的侧向挤出,从而消减了正向碰撞所造成的地壳缩短和增厚。     

青藏高原大型走滑断裂带晚新生代构造地貌生长及水系响应

大型走滑断裂带对调节印度板块和亚洲板块碰撞后产生的陆内构造变形和地貌生长起着非常重要作用。本文分析了沿青藏高原北缘主要大型左旋走滑断裂带：东昆仑、康西瓦和鲜水河-小江断裂带发育的错断地质体、大型错断水系或水系拐弯等新构造地貌特征,表明这些大型走滑断裂带在晚新生代以来发生了大规模的左旋走滑运动：前新生代地质体错位距离为80～120 km,大型水系累积的位移量可达80～90 km。根据这些走滑断裂带的长期走滑速率为8～12 mm/a,估算上述大型走滑断裂带的左旋走滑运动开始于中新世晚期：东昆仑和康西瓦断裂带左旋走滑运动开始于10±2 Ma; 鲜水河-小江断裂带甘孜-玉树段的左旋走滑运动的开始时间约为8～115 Ma。同样,如果大型水系的沿断裂带出现的大型错位或拐弯能够代表断裂带累积错位的上限,表明发源于青藏高原的黄河、金沙江、喀拉喀什河和玉龙喀什河等一级水系上游大致开始形成于9～7 Ma±。西昆仑山前盆地中河流相沉积的最早响应时间为8～6 Ma,与喀拉喀什河和玉龙喀什河等西昆仑山地区一级水系的形成时间基本一致,表明这些大型水系初始形成时间与左旋走滑构造运动的开始时间准同时。这表明中新世中晚期青藏高原构造演化发生了重要转变。     

Late Miocene movement within the Himalayan Main Central Thrust shear zone, Sikkim, north-east India

In the Sikkim region of north‐east India, the Main Central Thrust (MCT) juxtaposes high‐grade gneisses of the Greater Himalayan Crystallines over lower‐grade slates, phyllites and schists of the Lesser Himalaya Formation. Inverted metamorphism characterizes rocks that immediately underlie the thrust, and the large‐scale South Tibet Detachment System (STDS) bounds the northern side of the Greater Himalayan Crystallines. In situ Th–Pb monazite ages indicate that the MCT shear zone in the Sikkim region was active at c. 22, 14–15 and 12–10 Ma, whereas zircon and monazite ages from a slightly deformed horizon of a High Himalayan leucogranite within the STDS suggest normal slip activity at c. 17 and 14–15 Ma. Although average monazite ages decrease towards structurally lower levels of the MCT shear zone, individual results do not follow a progressive younging pattern. Lesser Himalaya sample KBP1062A records monazite crystallization from 11.5 ± 0.2 to 12.2 ± 0.1 Ma and peak conditions of 610 ± 25 °C and 7.5 ± 0.5 kbar, whereas, in the MCT shear zone rock CHG14103, monazite crystallized from 13.8 ± 0.5 to 11.9 ± 0.3 Ma at lower grade conditions of 525 ± 25 °C and 6 ± 1 kbar. The P–T–t results indicate that the shear zone experienced a complicated slip history, and have implications for the understanding of mid‐crustal extrusion and the role of out‐of‐sequence thrusts in convergent plate tectonic settings.     

The longest voyage: Tectonic,magmatic, and paleoclimatic evolution of the Indian plate during its northward flight from Gondwana to Asia

The tectonic evolution of the Indian plate, which started in Late Jurassic about 167 million years ago (~ 167 Ma) with the breakup of Gondwana, presents an exceptional and intricate case history against which a variety of plate tectonic events such as: continental breakup, sea-floor spreading, birth of new oceans, flood basalt volcanism, hotspot tracks, transform faults, subduction, obduction, continental collision, accretion, and mountain building can be investigated. Plate tectonic maps are presented here illustrating the repeated rifting of the Indian plate from surrounding Gondwana continents, its northward migration, and its collision first with the Kohistan–Ladakh Arc at the Indus Suture Zone, and then with Tibet at the Shyok–Tsangpo Suture. The associations between flood basalts and the recurrent separation of the Indian plate from Gondwana are assessed. The breakup of India from Gondwana and the opening of the Indian Ocean is thought to have been caused by plate tectonic forces (i.e., slab pull emanating from the subduction of the Tethyan ocean floor beneath Eurasia) which were localized along zones of weakness caused by mantle plumes (Bouvet, Marion, Kerguelen, and Reunion plumes). The sequential spreading of the Southwest Indian Ridge/Davie Ridge, Southeast Indian Ridge, Central Indian Ridge, Palitana Ridge, and Carlsberg Ridge in the Indian Ocean were responsible for the fragmentation of the Indian plate during the Late Jurassic and Cretaceous times. The Réunion and the Kerguelen plumes left two spectacular hotspot tracks on either side of the Indian plate. With the breakup of Gondwana, India remained isolated as an island continent, but reestablished its biotic links with Africa during the Late Cretaceous during its collision with the Kohistan–Ladakh Arc (~ 85 Ma) along the Indus Suture. Soon after the Deccan eruption, India drifted northward as an island continent by rapid motion carrying Gondwana biota, about 20 cm/year, between 67 Ma to 50 Ma; it slowed down dramatically to 5 cm/year during its collision with Asia in Early Eocene (~ 50 Ma). A northern corridor was established between India and Asia soon after the collision allowing faunal interchange. This is reflected by mixed Gondwana and Eurasian elements in the fossil record preserved in several continental Eocene formations of India. A revised India–Asia collision model suggests that the Indus Suture represents the obduction zone between India and the Kohistan–Ladakh Arc, whereas the Shyok-Suture represents the collision between the Kohistan–Ladakh arc and Tibet. Eventually, the Indus–Tsangpo Zone became the locus of the final India–Asia collision, which probably began in Early Eocene (~ 50 Ma) with the closure of Neotethys Ocean. The post-collisional tectonics for the last 50 million years is best expressed in the evolution of the Himalaya–Tibetan orogen. The great thickness of crust beneath Tibet and Himalaya and a series of north vergent thrust zones in the Himalaya and the south-vergent subduction zones in Tibetan Plateau suggest the progressive convergence between India and Asia of about 2500 km since the time of collision. In the early Eohimalayan phase (~ 50 to 25 Ma) of Himalayan orogeny (Middle Eocene–Late Oligocene), thick sediments on the leading edge of the Indian plate were squeezed, folded, and faulted to form the Tethyan Himalaya. With continuing convergence of India, the architecture of the Himalayan–Tibetan orogen is dominated by deformational structures developed in the Neogene Period during the Neohimalayan phase (~ 21 Ma to present), creating a series of north-vergent thrust belt systems such as the Main Central Thrust, the Main Boundary Thrust, and the Main Frontal Thrust to accommodate crustal shortening. Neogene molassic sediment shed from the rise of the Himalaya was deposited in a nearly continuous foreland trough in the Siwalik Group containing rich vertebrate assemblages. Tomographic imaging of the India–Asia orogen reveals that Indian lithospheric slab has been subducted subhorizontally beneath the entire Tibetan Plateau that has played a key role in the uplift of the Tibetan Plateau. The low-viscosity channel flow in response to topographic loading of Tibet provides a mechanism to explain the Himalayan–Tibetan orogen. From the start of its voyage in Southern Hemisphere, to its final impact with the Asia, the Indian plate has experienced changes in climatic conditions both short-term and long-term. We present a series of paleoclimatic maps illustrating the temperature and precipitation conditions based on estimates of Fast Ocean Atmospheric Model (FOAM), a coupled global climate model. The uplift of the Himalaya–Tibetan Plateau above the snow line created two most important global climate phenomena—the birth of the Asian monsoon and the onset of Pleistocene glaciation. As the mountains rose, and the monsoon rains intensified, increasing erosional sediments from the Himalaya were carried down by the Ganga River in the east and the Indus River in the west, and were deposited in two great deep-sea fans, the Bengal and the Indus. Vertebrate fossils provide additional resolution for the timing of three crucial tectonic events: India–KL Arc collision during the Late Cretaceous, India–Asia collision during the Early Eocene, and the rise of the Himalaya during the Early Miocene.     

Thermal Evolution of the Tanlu Fault Zone on the Eastern Margin of the Dabie Mountains and Its Tectonic Implications

Five samples of muscovite from mylonites of the earlier Tanlu ductile shear zone on the eastern margin of the Dabie Mountains yield 40Ar/39Ar ages ranging from 178 Ma to 196 Ma. Three of them have reliable plateau ages of 188.7±0.7 Ma, 189.7±0.6 Ma and 192.5±0.7 Ma respectively, which indicates a syn-orogenic, sinistral strike-slip thermal event. This displacement movement derived from the continent-continent collision of the North and South China blocks took place in the Early Jurassic and after uplifting of high-pressure to ultrahigh-pressure slabs to the mid-crust. It is suggested that during the collision the Tanlu fault zone was an intracontinental transform fault caused by differential subduction speeds. The 40Ar/39Ar ages of mylonite whole-rock and muscovite from the later Tanlu ductile shear zone suggest another sinistral strike-slip cooling event at 128 Ma. During this strike-slip faulting, large-scale intrusion and doming uplift occurred in the eastern part of the Dabie orogenic belt. Data o     

Metamorphic Evolution of High‐pressure Politic Granulite from the Ailaoshan Orogenic Belt,Northeastern Margin of Indochina Block,West Yunnan,China

Ailaoshan orogenic belt located at the northeastern margin of the Indochina block, southeastern Tibet, was formed by subduction and collision between the Indochina and South China blocks in Triassic and slip shearing resulted from the extrusion of the Indochina block in Cenozoic. The high‐pressure pelitic granulite is located at the southeastern margin of the Ailaoshan metamorphic belt, occurs as a slice of about 500～700m in thickness, consists of garnet, sillimanite, feldspar, biotite and quartz with accessory of kyanite, sapphirine, spinel, rutile, ilmenite, zircon and apatite. The petrography and mineral chemistry show that the high‐pressure pelitic granulite had suffered three stages of metamorphism: 1) the prograde metamorphism recorded by the mineral assemblage of garnet, kyanite, feldspar, biotite and rutile; 2) the peak metamorphism shown by the mineral assemblage of garnet, sillimanite, sapphirine, ternary feldspar, K‐feldspar, plagioclase, biotite, spinel, quartz, rutile and zircon mantle; 3) the retrograde metamorphism recorded by the mineral assemblage of biotite, muscovite, plagioclase, quartz and zircon rim. Zircon SHRIMP U‐Pb dating indicates that the protolith of the pelite granulite was deposited before 336 Ma, the prograde to peak metamorphism occurred at P‐T conditions of ≥10.4 kbar at 850～919 °C in 235 Ma, and the retrograde metamorphism occurred at the P‐T condition of 3.5～3.9 kbar at 572～576 °C until to 33 Ma. They are consistent with the times of Indochina separated from Gondwanaland during late Paleozoic, the amalgamation of the south China and Indochina blocks during the Triassic, and the sinistral slip‐shearing since the Early Cenozoic respectively. It is inferred that that the sedimentary rock was subducted to the lower continental crust (30 km) and suffered granulite‐facies metamorphism due to the collision during Indosinian, then exhumed quickly to middle‐upper crust (10–12km) and superimposed retrograde metamorphism since the Cenozoic.     

Cenozoic Magmatism and Tectonic Framework of Western Yunnan, China: Constrained from Geochemistry, Sr–Nd–Pb Isotopes and Fission Track Dating

Western Yunnan is composed of several extruded continental microblocks that were generated by the oblique collision between the Indian and Asian continents during the Cenozoic. In this study, the magmatic and tectonic frameworks of western Yunnan in the Cenozoic were analyzed based on geochemistry, Sr–Nd–Pb isotopes, and apatite/zircon fission track dating. Magmatism during the Cenozoic in western Yunnan was then divided into three distinctive episodes: alkali granite rocks produced from 55 to 46 Ma were derived from the anatexis of crustal materials; bimodal igneous rocks formed between 37 and 24 Ma were possibly derived from an EMII mantle with a contribution from continental materials; and intermediate–basic volcanic rocks produced in the Tengchong microblocks since ~16 Ma are considered to be generated by the partial melting of the upper mantle that was induced by the pulling apart of the dextral Gaoligong strike–slip fault system. Moreover, fission track analysis of apatite and zircon indicates that the regional crustal uplift in western Yunnan possibly began at ~34 Ma, with accelerated annealing occurring at ~24 Ma, ~13 Ma, and ~4 Ma. During the past 24 Ma, the average denudation rate was ~0.32 mm/yr for the faulted block controlled by the Chongshan–Lancang River fault. However, crustal uplift has been relatively gentle in places lacking influence from strike–slip shear zones, with an average denudation rate of ~0.2 mm/yr. Combined with strike–slip shear and block rotation in the Cenozoic, the tectonic evolution of western Yunnan since ~45 Ma can thus be divided into four stages occurring at 45–37 Ma, 37–24 Ma, 24–13 Ma, and 13–0 Ma.     

Paleozoic Tectono-Metallogeny in the Tianshan-Altay Region, Central Asia

The research on Paleozoic tectonics and endogenic metallogeny in the Tianshan-Altay region of Central Asia is an important and significant project. The Altay region, as a collision zone of the Early Paleozoic(500–397 Ma), and the Tianshan region, as a collision zone of the early period in the Late Paleozoic(Late Devonian-Early Carboniferous, 385–323 Ma), are all the result of nearly N-S trending shortening and collision(according to recent magnetic orientation). In the Late Devonian-Early Carboniferous period(385–323 Ma), regional NW trending faults displayed features of dextral strike-slip motion in the Altay and Junggar regions. In the Tianshan region, nearly EW-trending regional faults are motions of the thrusts. However, in the Late Carboniferous-Early Permian period(323–260 Ma), influenced by the long-distance effect induced from the Ural collision zone, those areas suffered weaker eastward compression, the existing NW trending faults converted into sinistral strike-slip in the Altay and Junggar regions, and the existing nearly E-W trending faults transferred into dextral strike-slip faults in the Tianshan region. The Rocks of those regions in the Late Carboniferous-Early Permian period(323–260 Ma) were moderately ruptured to a certain tension-shear, and thus formed a number of world famous giant endogenic metal ore deposits in the Tianshan-Altay region. As to the Central Asian continent, the most powerful collision period may not coincide with the most favorable endogenic metallogenic period. It should be treated to "the orogenic metallogeny hypothesis" with caution in that region.     

Long-term fluvial archives in the Fen Wei Graben,central China,and their bearing on the tectonic history of the India–Asia collision system during the Quaternary

Staircases of large-scale river terraces are striking features of the landscape in the Fen Wei Graben, adjacent to the Qinling orogenic belts, central China. Field investigations indicate that all five river terraces are composed of a basal channel gravel and an overlying, thick loess–palaeosol succession. As Chinese loess stratigraphy has been well studied, it favours age determination of these terraces and their correlation with the marine oxygen isotope stages. Our research indicates that the ages of the five terraces are approximately 2.6, 1.2, 0.9, 0.65, and 0.15 Ma, respectively. The formation of these river terraces within the Fen Wei Graben has been attributed to NW–SE crustal extension, associated with left lateral displacement between the North and South China Blocks, in response to the northward movement of India towards Asia since Cenozoic time. Thus, the stepped terraces in the Fen Wei Graben reflects elements of the India–Asia collision systems, in which terraces define episodes of accelerated northward movement of India towards Asia during the Quaternary.     

印度—亚洲大陆主碰撞过程的火山作用响应

广泛发育在西藏冈底斯岩浆岩带中的林子宗火山岩及其与下伏地层间的区域性不整合 ,提供了印度—亚洲大陆碰撞 (在西藏南部 )的构造火成岩新证据。岩石学、主元素、微量元素、稀土元素及Nd Sr Pb同位素地球化学研究表明 ,林子宗火山岩早期带有较多陆缘弧火山岩特征 ,中期开始出现标志陆内岩浆活动的钾玄岩 ,晚期更多地显示了加厚陆壳条件下火山岩的特点 ,记录了由新特提斯俯冲消减末期过渡到印度—亚洲大陆碰撞的信息。系统的40 Ar/3 9Ar同位素测年确定林子宗火山岩的年龄区间为 4 0 .84～ 6 4 .4 7Ma ;其底部年龄给出了林子宗火山岩与下伏地层间不整合形成时间的最晚时限 (～ 6 5Ma)。该不整合面上、下之地层在沉积相、变形样式与变形程度上均截然不同 ,反映形成环境的重大变化 ,标志着一次重大的地质事件。根据上述事实 ,结合青藏高原岩浆活动的区域时空分布 ,及西藏南部地层、古生物与沉积研究成果 ,笔者认为印度—亚洲大陆碰撞开始于 6 5Ma左右(K/T界限时间 )。     

Transpressive Structures in the Ghadir Shear Belt,Eastern Desert,Egypt: Evidence for Partitioning of Oblique Convergence in the Arabian‐Nubian Shield during Gondwana Agglutination

Transpressional deformation has played an important role in the late Neoproterozoic evolution of the ArabianNubian Shield including the Central Eastern Desert of Egypt. The Ghadir Shear Belt is a 35 km-long, NW-oriented brittleductile shear zone that underwent overall sinistral transpression during the Late Neoproterozoic. Within this shear belt, strain is highly partitioned into shortening, oblique, extensional and strike-slip structures at multiple scales. Moreover, strain partitioning is heterogeneous along-strike giving rise to three distinct structural domains. In the East Ghadir and Ambaut shear belts, the strain is pure-shear dominated whereas the narrow sectors parallel to the shear walls in the West Ghadir Shear Zone are simple-shear dominated. These domains are comparable to splay-dominated and thrust-dominated strike-slip shear zones. The kinematic transition along the Ghadir shear belt is consistent with separate strike-slip and thrustsense shear zones. The earlier fabric(S1), is locally recognized in low strain areas and SW-ward thrusts. S2 is associated with a shallowly plunging stretching lineation(L2), and defines ～NW-SE major upright macroscopic folds in the East Ghadir shear belt. F2 folds are superimposed by ～NNW–SSE tight-minor and major F3 folds that are kinematically compatible with sinistral transpressional deformation along the West Ghadir Shear Zone and may represent strain partitioning during deformation. F2 and F3 folds are superimposed by ENE–WSW gentle F4 folds in the Ambaut shear belt. The sub-parallelism of F3 and F4 fold axes with the shear zones may have resulted from strain partitioning associated with simple shear deformation along narrow mylonite zones and pure shear-dominant deformation in fold zones. Dextral ENEstriking shear zones were subsequently active at ca. 595 Ma, coeval with sinistral shearing along NW-to NNW-striking shear zones. The occurrence of upright folds and folds with vertical axes suggests that transpression plays a significant role in the tectonic evolution of the Ghadir shear belt. Oblique convergence may have been provoked by the buckling of the Hafafit gneiss-cored domes and relative rotations between its segments. Upright folds, fold with vertical axes and sinistral strike-slip shear zones developed in response to strain partitioning. The West Ghadir Shear Zone contains thrusts and strikeslip shear zones that resulted from lateral escape tectonics associated with lateral imbrication and transpression in response to oblique squeezing of the Arabian-Nubian Shield during agglutination of East and West Gondwana.     

印度板块和亚洲大陆在何时何地碰撞

印度板块和亚洲大陆的初始碰撞时间是所有相关的喜马拉雅-西藏造山体系演化模式的主控条件,并严重影响到对众多与青藏高原隆升和东亚大陆挤出相关的地质过程速率的解释,以及对新生代全球气候变化的理解。尽管印度板块和亚洲大陆汇聚的速率在55Ma突然减缓被广泛地认为是初始碰撞的标志,但这次碰撞所造成的主要构造效应直到20多个百万年以后才显现出来。对印度板块和亚洲大陆相对位置的重新估算,表明它们在55Ma时并没有达到可以彼此发生碰撞的距离。基于来自西藏新的野外证据和对已有数据的重新评估,认为初始碰撞发生在始新世—渐新世之交（约34Ma）,并对55Ma时发生的地质事件提出了另一种解释     

Transpression and juxtaposition of middle crust over upper crust forming a crustal scale flower structure: Insight from structural,fabric, and kinematic studies from the Rengali Province,eastern India

Deformational, metamorphic, monazite age and fabric data from Rengali Province, eastern India converge towards a multi-scale transpressional deformational episode at ca. 498–521 Ma which is linked with the latest phase of tectonic processes operative at proto-India-Antarctica join. Detailed sector wise study on mutual overprinting relationships of macro-to microstructural elements suggest that deformation was regionally partitioned into fold-thrust dominated shortening zones alternating with zones of dominant transcurrent deformation bounded between the thrust sense Barkot Shear Zone in the north and the dextral Kerajang Fault Zone in the south. The strain partitioned zones are further restricted between two regional transverse shear zones, the sinistral Riamol Shear Zone in the west and the dextral Akul Fault Zone in the east which are interpreted as synthetic R and antithetic R' Riedel shear plane, respectively. The overall structural disposition has been interpreted as a positive flower structure bounded between the longitudinal and transverse faults with vertical extrusion and symmetric juxtaposition of mid-crustal amphibolite grade basement gneisses over low-grade upper crustal rocks emanating from the central axis of the transpressional belt.     

西藏阿里地区冈底斯花岗岩体的热年代学特征及其构造意义

冈底斯花岗岩带是沿雅鲁藏布江北侧近东西向展布的一条长约2 500 km、宽100～300 km的巨型岩浆岩带。在阿里冈底斯山主峰岗仁波齐峰附近,冈底斯花岗岩体受到多期断裂活动的影响,特别受喜马拉雅大反向断裂和喀喇昆仑断裂活动的改造,造成断裂和岩体的关系出现很多复杂的情况,一些研究者把在北阿伊拉日居山分布的32～25 Ma的花岗岩作为喀喇昆仑断裂活动引起的同构造花岗岩,并把此年龄段归结为断层活动年龄,从而引起了极大的争论。本文的锆石U-Pb年龄指示了岗仁波齐峰地区的冈底斯花岗岩是由110 Ma、60 Ma和50 Ma的3期花岗岩组成,而韧性剪切带内的锆石年龄与附近未变形岩石内的锆石年龄一致,表明锆石的形态并未受到断裂活动的影响。韧性剪切带内云母的氩氩年龄为12 Ma左右,而周围未变形花岗岩的云母氩氩年龄在60～50 Ma左右,由此表明喀喇昆仑断裂在岗仁波齐峰地区是12 Ma开始活动的。由于研究区内韧性剪切带中的变形花岗岩并没有记录32～25 Ma这期热事件,由此排除了断裂在狮泉河-门士一线是32～25 Ma开始活动的可能性。     

印度—亚洲俯冲带结构——岩浆作用证据

在印度与亚洲大陆碰撞之后 ,两个大陆之间是否存在大陆俯冲是关系到高原地壳加厚、隆升等构造演化模式的重要问题。近 2 0年来以各种地球物理方法为主的深部探测结果揭示了青藏高原的岩石圈结构 ,表明印度向亚洲下部的俯冲是存在的 ,但是其俯冲的规模仍存在争议。不同观点认为印度岩石圈前缘已经到达班公—怒江缝合带的下部约 2 0 0km深度、俯冲在整个西藏岩石圈深部、或者仅仅越过雅鲁藏布江断裂。地热泉He同位素、碰撞后岩浆作用的年代学、岩石学与地球化学研究结果表明冈底斯带与高原北部地区具有相同的岩石圈地幔源区 ,并且存在印度板块在 13～ 2 5Ma之前就俯冲在冈底斯带西部的岩石学和地球化学证据 ,考虑到印度板块的持续向北运动 ,则岩浆作用支持印度岩石圈现今已经达到或者越过班公—怒江缝合带的俯冲模式。     

Crustal response to continental collisions between the Tibet, Indian, South China and North China Blocks: geochronological constraints from the Songpan-Garzê Orogenic Belt, western China

We report SHRIMP U–Th–Pb monazite, conventional U–Pb titanite, Sm–Nd garnet and Rb–Sr muscovite and biotite ages for metamorphic rocks from the Danba Domal Metamorphic Terrane in the eastern Songpan‐Garzê Orogenic Belt (eastern Tibet Plateau). These ages are used to determine the timing of polyphase metamorphic events and the subsequent cooling history. The oldest U–Th–Pb monazite and Sm–Nd garnet ages constrain an early Barrovian metamorphism (M1) in the interval c. 204–190 Ma, coincident with extensive Indosinian granitic magmatism throughout the Songpan‐Garzê Orogenic Belt. A second, higher‐grade sillimanite‐grade metamorphic event (M2), recorded only in the northern part of the Danba terrane, was dated at c. 168–158 Ma by a combination of U–Th–Pb monazite and titanite and Sm–Nd garnet ages. It is suggested that M1 was a thermal event that affected the entire orogenic belt while M2 may represent a local thermal perturbation. Rb–Sr muscovite ages range from c. 138–100 Ma, whereas Rb–Sr biotite ages cluster at c. 34–24 Ma. These ages document regional cooling at rates of c. 2–3 °C Myr^?1 following the M1 peak for most of the terrane. However, those parts of the terrane affected by the higher‐temperature M2 event (e.g. the migmatite zone) experienced initially more rapid (c. 8 °C Myr^?1) cooling after peak M2 before joining the regional slow cooling path defined by the rest of the terrane at c. 138 Ma. Regional slow cooling between c. 138 and c. 30 Ma is thought to be the result of post‐tectonic isostatic uplift after extensive crustal thickening caused by collision of the South and North China Blocks. The clustering of biotite Rb–Sr ages marks the onset of rapid uplift across the entire terrane commencing at c. 30–20 Ma. This cooling history is shared with many other regions of the Tibet Plateau, suggesting that uplift of the Tibet Plateau (including the Songpan‐Garzê Orogenic Belt) occurred predominantly in the last c. 30 Myr as a response to the continuing northwards collision of India with Eurasia.