TY型管节点局部柔度的参数分析及试验研究

由于海洋平台管节点的局部柔度对平台结构的静动力性能有重要影响，如何确定各类管节点的局部柔度成为一个重要的研究课题。本文用半解析方法计算了海洋平台中一类常见的管节点──ＴＹ型管节点的局部柔度，并用回归方法得出了计算ＴＹ型管节点局部柔度矩阵中各元素的参数公式。本文还介绍了对一组ＴＹ型管节点ＰＶＣ塑料模型进行的局部柔度试验。参数公式计算结果与模型试验结果的比较表明，本文得出的参数公式是基本可靠的，建议可在海洋平台总体结构分析中使用。     

Regression Formulations for the Stress at Hot Spot of Multiplanar Tubular DT Joints

- Stress concentration analysis of multiplanar tubular DT joints plays an important role in the fatigue design of offshore platforms. A semi-analytic method for stress analysis under the condition of any loads is briefly introduced in the paper. Nineteen multiplanar tubular DT joints with one of two braces of the same dimension subjected to axial loads and out- of- plane bending moments are computed for parametric stress analysis by using the present method. The influence of geometrical parameters on the stresses of multiplanar tubular DT joints is discussed and compared with corresponding uniplanar T joints. The regression formulae for the stress at hot spot of multiplanar DT joints are found by modification of SCF of corresponding uniplanar T joints. The parametric formulae for the maximum stress by superposition. Finally, the influences of stiffening effect and load-interaction effect on the maximum stress of DT joints are discussed.     

Structural Analysis of Platforms with the Effect of Joint Flexibility

- A modified space beam element is presented in this paper to consider the local joint flexibility of T, Y tubular joints subjected to axial forces and in- plane bending moments for analysis of platforms. Two numerical examples are shown to verify the efficiency and validity of the method presented here.     

Optimum design of ice-resistant offshore jacket platforms in the Bohai Gulf in consideration of fatigue life of tubular joints

Economy and ice-resistance are two factors that must be considered in the design of offshore oil platforms in the Bohai Gulf. This paper focuses on the optimal design of ice-resistant offshore jacket platforms in the Bohai Gulf in consideration of fatigue life of tubular joints, with the minimum initial weight and satisfying dynamic properties. An efficient fatigue analysis procedure based on spectral analysis is proposed, in which a hybrid finite element model is adopted to simulate the jacket platform and the tubular joints, and the pseudo-excitation method is used to calculate the power spectral density of the hot spot stress. Finally, a practical jacket platform with an ice-breaking cone in the Bohai Gulf is optimized, and the results demonstrate that the fatigue life of tubular joints could be improved and the weight of jackets decreased simultaneously.     

安全叠接管节点在低周循环载荷下的破坏模式研究

采用实验和数值模拟方法研究了一种新型海洋平台管节点在地震载荷下的响应和破坏情况。采用拟静态循环加载模拟地震载荷 ,对真实尺寸的试件进行实验 ,研究局部屈曲和裂纹等对管接点抗震性能的影响。能量分析表明 ,发生在斜支管中的局部屈曲消耗了大部分输入能量。与现在使用的N型管节点相比 ,该新型管节点有较好的抗震性能。采用有限元数值模拟方法分析比较了不同尺寸配置下 ,该型管节点的响应曲线     

Nonlinear joint flexibility element for the modeling of jacket-type offshore platforms

A new nonlinear two-dimensional tubular joint element is developed in this study on the basis of flexibility equations and the interaction between the axial force and the in-plane bending moment in the joint. Empirical equations are used to define the joint yielding in the axial direction and the in-plane rotation. An elastic-perfectly plastic yield function is adopted to include the combined effects of axial loads and bending moments on the yielding of the joint. The element formulation is straightforward, and it can readily be implemented in nonlinear finite element programs. Verification studies are carried out for the element to prove its suitability for the modeling of tubular joints of offshore jacket structures. It is concluded that the nonlinear joint model that has been developed produces accurate results, verified against experimental data as well as against sophisticated multi-axial finite element joint models.     

Local Joint Flexibility Multibrace Tubular Joints

The local joint flexibility matrix of multibrace tubular joints (uniplanar and multiplanar joints) is defined. The formulation for computing the elements of local flexibility factor matrix of multibrace tubular joints by semi- analytic method is presented in this paper. The stiffening effect of unloaded braces and cross-flexibility between braces are discussed. Using the local flexibility of unibrace joints instead of that of multibrace joints in conventional structural analysis will lead the result to an unsafe side.     

Probabilistic analysis of the DoB in axially-loaded tubular KT-joints of offshore structures

The degree of bending (DoB) characterizing the through-the-thickness stress distribution has a profound effect on the fatigue behavior of tubular joints commonly found in steel offshore structures and the determination of DoB values is essential for improving the accuracy of fatigue life estimation. Probability density functions of the involved random variables are necessary for the fatigue reliability analysis of offshore structures. The objective of present research was the derivation of probability density function (PDF) for the DoB in tubular KT-joints commonly found in jacket-type offshore platforms. A total of 162 finite element (FE) analyses were carried out on 81 FE models of KT-joints subjected to two types of axial loading. Generated FE models were validated using experimental data, previous FE results, and available parametric equations. Based on the results of parametric FE study, a sample database was prepared for the DoB values and density histograms were generated for respective samples based on the Freedman-Diaconis rule. Thirteen theoretical PDFs were fitted to the developed histograms and the maximum likelihood (ML) method was applied to evaluate the parameters of fitted PDFs. In each case, the Kolmogorov-Smirnov test was used to evaluate the goodness of fit. Finally, the Generalized Extreme Value model was proposed as the governing probability distribution function for the DoB. After substituting the values of estimated parameters, six fully defined PDFs were presented for the DoB in tubular KT-joints subjected to two types of axial loading.     

KK型管节点应力集中系数几何敏感性分析

KK型管节点是自升式平台桁架式桩腿中的一种管节点，其应力集中系数是影响桩腿疲劳寿命的重要参数。应力集中系数与管节点的几何形式密切相关，为分析KK型管节点应力集中系数对几何参数的敏感性，利用ANSYS软件对某KK型管节点进行几何参数化建模，利用有限元数值模拟方法对各工况下的热点应力进行分析，并分别计算各相应工况下的名义应力，然后将热点应力与名义应力相比得到不同几何参数下的热点应力集中系数。对计算结果进行整理分析，得到了KK型管节点应力集中系数对无量纲几何参数的敏感性规律。结果表明，应力集中系数与撑杆受力状态、管节点结构形式有关，在满足结构布置、建造工艺和其他安全性指标的前提下，分析结果能够为KK型管节点的结构设计和疲劳分析提供技术支撑。     

建立海洋平台管节点PSN曲线的贝叶斯方法

针对管节点疲劳试验的小样本特点,探讨了建立ＰＳＮ 曲线的贝叶斯方法。在贝叶斯方法中,ＰＳＮ曲线的统计参数作为随机变量处理,首先根据贝叶斯定理求出参数向量的后验概率密度,然后建立ＰＳＮ曲线的贝叶斯方程,最后再编程计算。算例表明,与传统的ＰＳＮ 曲线相比,贝叶斯ＰＳＮ 曲线更加安全可靠     

An Improved Formulation for the Ultimate Static Strength of Tubular Joints subjected to Combined Loads

"The effect of interaction of loads on the ultimate static strength of tubular joints of offshore fixed platforms, is a practical problem. But there is still absence of rigorous theory to explain available experimental data and empirical criteria for the static strength of tubular joints. The idea of yield at hot spot of tubular joints is introduced in this paper. The interaction equations of plastic capacity for the tubular joints under combined loads (two and three different kinds) are derived. Thereafter the Yura's test data and empirical criteria of ultimate static strength for the tubular joints can be explained. The idea of classification of category of loads in accordance with experimental data and the present theory is suggested. Finally, the improved ultimate capacity equations for tubular joints are recommended. The physical significance of the coefficient of plastic reservation Qp is discussed.     

Reliability-Based Load and Resistance Factors Design for Offshore Jacket Platforms in the Bohai Bay： Calibration on Target Reliability Index

The target reliability index has been effectively used as the best solution to deal with the relationship between the structural safety and the optimal economy in any structural design.However,the target reliability index for offshore jacket platforms based on different sea areas in China has never been calibrated.This paper presents an approach for its calibration,and suggests many kinds of associated load cases.The uncertainties of loads and structural resistance are mainly investigated.The target reliability index for structural components,tubular joints and piles of offshore jacket platforms are discussed respectively in detail.Finally,through the calibrated results from the offshore jacket platforms of QK18-1,JZ20-2,SZ36-1 and BZ28-1 in the Bohai Bay,it is proposed to adopt 2.8 as the target reliability index of offshore jacket platforms in the Bohai Bay for a 25-year design period.The results provide significant reference for the design of offshore jacket platforms.     

Reliability-Based Load and Resistance Factors Design for Offshore Jacket Platforms in the Bohai Bay: Calibration on Target Reliability Index

The target reliability index has been effectively used as the best solution to deal with the relationship between the structural safety and the optimal economy in any structural design. However, the target reliability index for off-shore jacket platforms based on different sea areas in China has never been calibrated. This paper presents an approach for its calibration, and suggests many kinds of associated load cases. The uncertainties of loads and structural resistance are mainly investigated. The target reliability index for structural components, tubular joints and piles of offshore jacket platforms are discussed respectively in detail. Finally, through the calibrated results from the offshore jacket platforms of QK18-1, JZ20-2, SZ36-1 and BZ28-1 in the Bohai Bay, it is proposed to adopt 2.8 as the target reliability index of offshore jacket platforms in the Bohai Bay for a 25-year design period. The results provide significant reference for the design of offshore jacket platforms.     

The Stress Concentration of Multiplanar Tubular Joints of Offshore Structure

- The formulation for the stress concentration matrix of multiplanar tubular joint with braces subjected to combined load is established in this paper. The formulations for SCF values of multiplanar tubular joints are compared with those by Wordsworth and Efthymiou. The stiffening effect and load-interaction effect are discussed. A spatial offshore jacket with braces subjected to combined load is computed as a numerical example. The maximum stress of each multiplanar tubular joint and its location are found through SCF matrix. Finally, the difference between the maximum stresses of multiplanar tubular joints and their corresponding uniplanar tubular joints are discussed.     

Parametric study of geometrical effects on the degree of bending (DoB) in offshore tubular K-joints under out-of-plane bending loads

In this paper, results of comprehensive finite element (FE) analyses carried out on 81 generated models of tubular K-joints are presented. Results of FE models were verified against experimental data and parametric equations. The fatigue life of a tubular joint, which is commonly found in offshore industry, is not only dependent on the value of hot-spot stress (HSS), but is also significantly influenced by the through-the-thickness stress distribution characterized by the degree of bending (DoB). Data extracted from FE analyses was used to study the effects of geometrical parameters on the DoB values in tubular K-joints subjected to two types of out-of-plane bending (OPB) moment loads. The determination of DoB values in a tubular joint is essential for improving the accuracy of fatigue life estimation using the stress-life (S–N) method and particularly for predicting the fatigue crack growth based on the fracture mechanics (FM) approach. Geometrically parametric investigation was followed by a set of nonlinear regression analyses to develop DoB parametric formulas for the fatigue analysis of K-joints under OPB loadings.     

Reliability Analysis for Offshore Platform Structural Systems

A system reliability estimation method for spatial jacket platforms is developed in this paper,The jacket platform is modeled into three-dimensional assembly of spatial beam and plate elements in Fi-nite Element Method(FEM).The limit failure states correspond to collapse of a series of structural mem-bers which are identified by engineering design criteria.In this paper the following aspects are taken intoaccount:the punching shear and buckiing failures in member failure modes for the tubular joints and tubu-lar columns respectively;incremental loading approach for establishment of the safety margin equations ofsystem failure;the algorithm of enumerating significant failure modes for the structural systems and otherconcepts,such as the false failure mode and the virtual limit state.The final work is devoted to the reliabili-ty analysis for a practical jacket platform presently put into operation on the Bohai Sea.The computed re-sults shows that method suggested in this paper is feasible and effective for     

Cyclic inelastic behavior and analytical modelling of pile–leg interaction in jacket type offshore platforms

Structures in locations susceptible to severe seismic disturbances should be designed properly in order to resist lateral forces induced by earthquake motions. Steel offshore platforms are some of those structures which are built to withstand environmental and accidental loads during oil exploitation operation. Particular attention is being paid to earthquake loads in seismic active areas because it directly influences the capacity of the offshore installations.

In this paper, a small-scaled planar platform has been modelled analytically using nonlinear finite element program, based on an experimental test, conducted simultaneously in order to assess the local and global behavior of pile–leg interaction in Jacket Type Offshore Platforms (JTOPs). A combination of nonlinear beam column elements and fatigue affected elements are used to capture the inelastic cyclic behavior of planar frame as accurately as possible. Results of analytical tests are to be compared with experiments and it is concluded that an analytical approach can be best used for modelling JTOPs with reasonable accuracy regardless of the type and scale of the structure. Moreover, a special study on joints has been carried out and the best model has been selected to simulate brittle behavior of joints resulting from heat affected zone.     

Life evaluation of a 35-kV submarine power cable in a continuous flexing environment

This paper describes the life testing of a 35-kV power cable that will connect a single anchor leg mooring (SALM) buoy with a platform in several hundred feet of water. While there are many power cable installations to offshore platforms and between platforms, this system is unique because the cable will be constantly flexing in compression as the mooring buoy moves in the water. The buoy design includes an articulated leg with universal joints to which the cable is clamped. It is the loop in the cable where it crosses a universal joint that is flexed, and is a major cause of concern. To predict the effects of this constant flexure while energized, a flex simulator and electrical circuit were devised to duplicate the service environment as closely as possible. This paper describes the cable system, the test apparatus and procedure, and the results obtained.     

Dynamic Ice-Induced Responses of Offshore Fixed Platforms

The dynamic responses of offshore fixed platforms under ice loads are analysed in this paper. The responses calculated include the displacement and the hot spot stresses on the basis of a dynamic equation of ice-induced forced vibration for offshore structures. The results obtained can be cited and used for the design and operation of offshore fixed platforms against ice loading.     

Fatigue Test of Homemade Z Direction Steel Welded T Tubular Joints

This paper introduces the process and result of fatigue test of steel (Z direction steel) welded T tubular joints used in offshore engineering. Detailed measurement of stress concentration factor, stress distribution, fatigue life and crack development has been performed. Through analysis, an empirical formula of stress concentration factor for T tubular joints, fatigue S-N curve and crack propagation rule are obtained.